* [lm-sensors] [PATCH] sensors.conf.default: Add default voltage settings for nct6791
@ 2014-02-20 20:24 Jean Delvare
2014-02-21 5:21 ` Guenter Roeck
2014-02-21 8:10 ` Jean Delvare
0 siblings, 2 replies; 3+ messages in thread
From: Jean Delvare @ 2014-02-20 20:24 UTC (permalink / raw)
To: lm-sensors
Guenter, do I get it right that the NCT6791 has the same voltage input
constraints as the NCT6775 and NCT6776?
Are there other Nuvoton chips that should be added to the list?
Index: etc/sensors.conf.default
===================================================================
--- etc/sensors.conf.default (révision 6222)
+++ etc/sensors.conf.default (copie de travail)
@@ -308,7 +308,7 @@
# set in8_max 3.0 * 1.10
-chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
+chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" "nct6791-*"
label in0 "Vcore"
label in2 "AVCC"
--
Jean Delvare
Suse L3 Support
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] [PATCH] sensors.conf.default: Add default voltage settings for nct6791
2014-02-20 20:24 [lm-sensors] [PATCH] sensors.conf.default: Add default voltage settings for nct6791 Jean Delvare
@ 2014-02-21 5:21 ` Guenter Roeck
2014-02-21 8:10 ` Jean Delvare
1 sibling, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2014-02-21 5:21 UTC (permalink / raw)
To: lm-sensors
On 02/20/2014 12:24 PM, Jean Delvare wrote:
> Guenter, do I get it right that the NCT6791 has the same voltage input
> constraints as the NCT6775 and NCT6776?
>
Hi Jean,
Yes, this is correct.
> Are there other Nuvoton chips that should be added to the list?
>
NCT6779.
Note that NCT6791 and NCT6779 have 15 voltage monitoring registers.
Guenter
> Index: etc/sensors.conf.default
> ===================================================================
> --- etc/sensors.conf.default (révision 6222)
> +++ etc/sensors.conf.default (copie de travail)
> @@ -308,7 +308,7 @@
> # set in8_max 3.0 * 1.10
>
>
> -chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
> +chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" "nct6791-*"
>
> label in0 "Vcore"
> label in2 "AVCC"
>
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] [PATCH] sensors.conf.default: Add default voltage settings for nct6791
2014-02-20 20:24 [lm-sensors] [PATCH] sensors.conf.default: Add default voltage settings for nct6791 Jean Delvare
2014-02-21 5:21 ` Guenter Roeck
@ 2014-02-21 8:10 ` Jean Delvare
1 sibling, 0 replies; 3+ messages in thread
From: Jean Delvare @ 2014-02-21 8:10 UTC (permalink / raw)
To: lm-sensors
On Thu, 20 Feb 2014 21:21:55 -0800, Guenter Roeck wrote:
> On 02/20/2014 12:24 PM, Jean Delvare wrote:
> > Guenter, do I get it right that the NCT6791 has the same voltage input
> > constraints as the NCT6775 and NCT6776?
>
> Yes, this is correct.
>
> > Are there other Nuvoton chips that should be added to the list?
>
> NCT6779.
OK, I added both to sensors.conf.default.
--
Jean Delvare
Suse L3 Support
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-02-21 8:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-20 20:24 [lm-sensors] [PATCH] sensors.conf.default: Add default voltage settings for nct6791 Jean Delvare
2014-02-21 5:21 ` Guenter Roeck
2014-02-21 8:10 ` Jean Delvare
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.