* [U-Boot] [PATCH] powerpc/mpc8536DS:Increase binary size for mpc8536DS board
@ 2014-02-13 1:03 Haijun Zhang
2014-02-24 23:55 ` York Sun
0 siblings, 1 reply; 2+ messages in thread
From: Haijun Zhang @ 2014-02-13 1:03 UTC (permalink / raw)
To: u-boot
u-boot binary size for Freescale mpc8536DS platforms is 512KB.
This has been reached to upper limit of the platforms and causig
linker error. So increase the u-boot binary size to 768KB.
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
---
include/configs/MPC8536DS.h | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 57bf04f..2505869 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -42,7 +42,7 @@
#endif
#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xeff80000
+#define CONFIG_SYS_TEXT_BASE 0xeff40000
#endif
#ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -326,7 +326,7 @@
/* NAND boot: 4K NAND loader config */
#define CONFIG_SYS_NAND_SPL_SIZE 0x1000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000)
#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR)
#define CONFIG_SYS_NAND_U_BOOT_START \
(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
@@ -626,7 +626,7 @@
#if defined(CONFIG_RAMBOOT_NAND)
#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
#elif defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -649,11 +649,7 @@
#endif
#else
#define CONFIG_ENV_IS_IN_FLASH 1
- #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
- #define CONFIG_ENV_ADDR 0xfff80000
- #else
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
- #endif
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
#endif
--
1.8.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] powerpc/mpc8536DS:Increase binary size for mpc8536DS board
2014-02-13 1:03 [U-Boot] [PATCH] powerpc/mpc8536DS:Increase binary size for mpc8536DS board Haijun Zhang
@ 2014-02-24 23:55 ` York Sun
0 siblings, 0 replies; 2+ messages in thread
From: York Sun @ 2014-02-24 23:55 UTC (permalink / raw)
To: u-boot
On 02/12/2014 05:03 PM, Haijun Zhang wrote:
> u-boot binary size for Freescale mpc8536DS platforms is 512KB.
> This has been reached to upper limit of the platforms and causig
> linker error. So increase the u-boot binary size to 768KB.
>
> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
> ---
Applied to u-boot-mpc85xx/master. Thanks.
York
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-02-24 23:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-13 1:03 [U-Boot] [PATCH] powerpc/mpc8536DS:Increase binary size for mpc8536DS board Haijun Zhang
2014-02-24 23:55 ` York Sun
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.