* Unusable interfaces although apparently attached to IGB_UIO
@ 2014-02-25 12:20 Marc Sune
[not found] ` <530C8A76.5040701-kpkqNMk1I7M@public.gmane.org>
0 siblings, 1 reply; 5+ messages in thread
From: Marc Sune @ 2014-02-25 12:20 UTC (permalink / raw)
To: <dev-VfR2kkLFssw@public.gmane.org>
Dear all,
We've been experiencing problems with interfaces being recognised by
DPDK since some time now, I think since the very begining we started
using DPDK (aprox. 1.3). Randomly, even on a fresh reboot (after
modprobe->attach->launch dpdk_app), and properly attached to the IGB_UIO
kmod [0], interfaces do appear in the "probe stage" of the respective
driver during RTE* initialization, but DPDK complains there are no
DPDK-enabled interfaces [1].
It even happens with the examples provided [1]. Once they enter in this
"zombie state", there is no way to recover them unless a reboot is
performed. Attaching igb_uio -> igb -> gb_uio does not solve it either.
This happens also with 1G copper ports.
Any ideas?
Thanks and regards
marc
p.s. Using 1.5.2 branch right now
-------------------------
[0] setup.sh
Option: 10
Network devices using IGB_UIO driver
====================================
0000:06:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection'
drv=igb_uio unused=
0000:06:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection'
drv=igb_uio unused=
Network devices using kernel driver
===================================
0000:08:00.1 'DH8900CC Series Gigabit Network Connection' if=eth3
drv=igb unused=igb_uio
0000:08:00.2 'DH8900CC Series Gigabit Network Connection' if=eth5
drv=igb unused=igb_uio
0000:08:00.3 'DH8900CC Series Gigabit Network Connection' if=eth6
drv=igb unused=igb_uio
0000:08:00.4 'DH8900CC Series Gigabit Network Connection' if=eth7
drv=igb unused=igb_uio
0000:09:00.0 'I350 Gigabit Network Connection' if=eth8 drv=igb
unused=igb_uio *Active*
0000:09:00.1 'I350 Gigabit Network Connection' if=eth9 drv=igb
unused=igb_uio *Active*
0000:09:00.2 'I350 Gigabit Network Connection' if=eth10 drv=igb
unused=igb_uio
0000:09:00.3 'I350 Gigabit Network Connection' if=eth11 drv=igb
unused=igb_uio
0000:85:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth2
drv=ixgbe unused=igb_uio
0000:85:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth4
drv=ixgbe unused=igb_uio
Other network devices
=====================
<none>
Enter PCI address of device to bind to IGB UIO driver:
[1] l2fwd
marc@bertha-dpdk:~/dpdk/examples/l2fwd/build$ sudo ./l2fwd -c 0xFF -n 2
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Detected lcore 8 as core 0 on socket 1
EAL: Detected lcore 9 as core 1 on socket 1
EAL: Detected lcore 10 as core 2 on socket 1
EAL: Detected lcore 11 as core 3 on socket 1
EAL: Detected lcore 12 as core 4 on socket 1
EAL: Detected lcore 13 as core 5 on socket 1
EAL: Detected lcore 14 as core 6 on socket 1
EAL: Detected lcore 15 as core 7 on socket 1
EAL: Skip lcore 16 (not detected)
EAL: Skip lcore 17 (not detected)
EAL: Skip lcore 18 (not detected)
EAL: Skip lcore 19 (not detected)
EAL: Skip lcore 20 (not detected)
EAL: Skip lcore 21 (not detected)
EAL: Skip lcore 22 (not detected)
EAL: Skip lcore 23 (not detected)
EAL: Skip lcore 24 (not detected)
EAL: Skip lcore 25 (not detected)
EAL: Skip lcore 26 (not detected)
EAL: Skip lcore 27 (not detected)
EAL: Skip lcore 28 (not detected)
EAL: Skip lcore 29 (not detected)
EAL: Skip lcore 30 (not detected)
EAL: Skip lcore 31 (not detected)
EAL: Skip lcore 32 (not detected)
EAL: Skip lcore 33 (not detected)
EAL: Skip lcore 34 (not detected)
EAL: Skip lcore 35 (not detected)
EAL: Skip lcore 36 (not detected)
EAL: Skip lcore 37 (not detected)
EAL: Skip lcore 38 (not detected)
EAL: Skip lcore 39 (not detected)
EAL: Skip lcore 40 (not detected)
EAL: Skip lcore 41 (not detected)
EAL: Skip lcore 42 (not detected)
EAL: Skip lcore 43 (not detected)
EAL: Skip lcore 44 (not detected)
EAL: Skip lcore 45 (not detected)
EAL: Skip lcore 46 (not detected)
EAL: Skip lcore 47 (not detected)
EAL: Skip lcore 48 (not detected)
EAL: Skip lcore 49 (not detected)
EAL: Skip lcore 50 (not detected)
EAL: Skip lcore 51 (not detected)
EAL: Skip lcore 52 (not detected)
EAL: Skip lcore 53 (not detected)
EAL: Skip lcore 54 (not detected)
EAL: Skip lcore 55 (not detected)
EAL: Skip lcore 56 (not detected)
EAL: Skip lcore 57 (not detected)
EAL: Skip lcore 58 (not detected)
EAL: Skip lcore 59 (not detected)
EAL: Skip lcore 60 (not detected)
EAL: Skip lcore 61 (not detected)
EAL: Skip lcore 62 (not detected)
EAL: Skip lcore 63 (not detected)
EAL: Setting up memory...
EAL: Ask a virtual area of 0x1073741824 bytes
EAL: Virtual area found at 0x7f7dff000000 (size = 0x40000000)
EAL: Ask a virtual area of 0x1073741824 bytes
EAL: Virtual area found at 0x7f7dbee00000 (size = 0x40000000)
EAL: Requesting 512 pages of size 2MB from socket 0
EAL: Requesting 512 pages of size 2MB from socket 1
EAL: TSC frequency is ~1200000 KHz
EAL: Master core 0 is ready (tid=4025a840)
EAL: Core 1 is ready (tid=be1f2700)
EAL: Core 4 is ready (tid=bc9ef700)
EAL: Core 6 is ready (tid=bb9ed700)
EAL: Core 3 is ready (tid=bd1f0700)
EAL: Core 7 is ready (tid=bb1ec700)
EAL: Core 5 is ready (tid=bc1ee700)
EAL: Core 2 is ready (tid=bd9f1700)
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: PCI memory mapped at 0x7f7e401a7000
EAL: PCI memory mapped at 0x7f7e4026d000
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: PCI memory mapped at 0x7f7e40127000
EAL: PCI memory mapped at 0x7f7e40269000
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:438 rte_igb_pmd
EAL: 0000:08:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:08:00.2 on NUMA socket 0
EAL: probe driver: 8086:438 rte_igb_pmd
EAL: 0000:08:00.2 not managed by UIO driver, skipping
EAL: PCI device 0000:08:00.3 on NUMA socket 0
EAL: probe driver: 8086:438 rte_igb_pmd
EAL: 0000:08:00.3 not managed by UIO driver, skipping
EAL: PCI device 0000:08:00.4 on NUMA socket 0
EAL: probe driver: 8086:438 rte_igb_pmd
EAL: 0000:08:00.4 not managed by UIO driver, skipping
EAL: PCI device 0000:09:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 rte_igb_pmd
EAL: 0000:09:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:09:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 rte_igb_pmd
EAL: 0000:09:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:09:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 rte_igb_pmd
EAL: 0000:09:00.2 not managed by UIO driver, skipping
EAL: PCI device 0000:09:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 rte_igb_pmd
EAL: 0000:09:00.3 not managed by UIO driver, skipping
EAL: PCI device 0000:85:00.0 on NUMA socket 1
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: 0000:85:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:85:00.1 on NUMA socket 1
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: 0000:85:00.1 not managed by UIO driver, skipping
EAL: Error - exiting with code: 1
Cause: No Ethernet ports - bye
^ permalink raw reply [flat|nested] 5+ messages in thread[parent not found: <530C8A76.5040701-kpkqNMk1I7M@public.gmane.org>]
* Re: Unusable interfaces although apparently attached to IGB_UIO [not found] ` <530C8A76.5040701-kpkqNMk1I7M@public.gmane.org> @ 2014-02-25 13:00 ` Ananyev, Konstantin [not found] ` <2601191342CEEE43887BDE71AB97725808E6ACA7-kPTMFJFq+rEu0RiL9chJVbfspsVTdybXVpNB7YpNyf8@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: Ananyev, Konstantin @ 2014-02-25 13:00 UTC (permalink / raw) To: Marc Sune, <dev-VfR2kkLFssw@public.gmane.org> Hi, Probably try to rebuild with CONFIG_RTE_LIBRTE_IXGBE_DEBUG_*=y and rerun? Might be it would give you some insight what is going wrong. Konstantin -----Original Message----- From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Marc Sune Sent: Tuesday, February 25, 2014 12:20 PM To: <dev-VfR2kkLFssw@public.gmane.org> Subject: [dpdk-dev] Unusable interfaces although apparently attached to IGB_UIO Dear all, We've been experiencing problems with interfaces being recognised by DPDK since some time now, I think since the very begining we started using DPDK (aprox. 1.3). Randomly, even on a fresh reboot (after modprobe->attach->launch dpdk_app), and properly attached to the IGB_UIO kmod [0], interfaces do appear in the "probe stage" of the respective driver during RTE* initialization, but DPDK complains there are no DPDK-enabled interfaces [1]. It even happens with the examples provided [1]. Once they enter in this "zombie state", there is no way to recover them unless a reboot is performed. Attaching igb_uio -> igb -> gb_uio does not solve it either. This happens also with 1G copper ports. Any ideas? Thanks and regards marc p.s. Using 1.5.2 branch right now ------------------------- [0] setup.sh Option: 10 Network devices using IGB_UIO driver ==================================== 0000:06:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' drv=igb_uio unused= 0000:06:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' drv=igb_uio unused= Network devices using kernel driver =================================== 0000:08:00.1 'DH8900CC Series Gigabit Network Connection' if=eth3 drv=igb unused=igb_uio 0000:08:00.2 'DH8900CC Series Gigabit Network Connection' if=eth5 drv=igb unused=igb_uio 0000:08:00.3 'DH8900CC Series Gigabit Network Connection' if=eth6 drv=igb unused=igb_uio 0000:08:00.4 'DH8900CC Series Gigabit Network Connection' if=eth7 drv=igb unused=igb_uio 0000:09:00.0 'I350 Gigabit Network Connection' if=eth8 drv=igb unused=igb_uio *Active* 0000:09:00.1 'I350 Gigabit Network Connection' if=eth9 drv=igb unused=igb_uio *Active* 0000:09:00.2 'I350 Gigabit Network Connection' if=eth10 drv=igb unused=igb_uio 0000:09:00.3 'I350 Gigabit Network Connection' if=eth11 drv=igb unused=igb_uio 0000:85:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth2 drv=ixgbe unused=igb_uio 0000:85:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth4 drv=ixgbe unused=igb_uio Other network devices ===================== <none> Enter PCI address of device to bind to IGB UIO driver: [1] l2fwd marc@bertha-dpdk:~/dpdk/examples/l2fwd/build$ sudo ./l2fwd -c 0xFF -n 2 EAL: Detected lcore 0 as core 0 on socket 0 EAL: Detected lcore 1 as core 1 on socket 0 EAL: Detected lcore 2 as core 2 on socket 0 EAL: Detected lcore 3 as core 3 on socket 0 EAL: Detected lcore 4 as core 4 on socket 0 EAL: Detected lcore 5 as core 5 on socket 0 EAL: Detected lcore 6 as core 6 on socket 0 EAL: Detected lcore 7 as core 7 on socket 0 EAL: Detected lcore 8 as core 0 on socket 1 EAL: Detected lcore 9 as core 1 on socket 1 EAL: Detected lcore 10 as core 2 on socket 1 EAL: Detected lcore 11 as core 3 on socket 1 EAL: Detected lcore 12 as core 4 on socket 1 EAL: Detected lcore 13 as core 5 on socket 1 EAL: Detected lcore 14 as core 6 on socket 1 EAL: Detected lcore 15 as core 7 on socket 1 EAL: Skip lcore 16 (not detected) EAL: Skip lcore 17 (not detected) EAL: Skip lcore 18 (not detected) EAL: Skip lcore 19 (not detected) EAL: Skip lcore 20 (not detected) EAL: Skip lcore 21 (not detected) EAL: Skip lcore 22 (not detected) EAL: Skip lcore 23 (not detected) EAL: Skip lcore 24 (not detected) EAL: Skip lcore 25 (not detected) EAL: Skip lcore 26 (not detected) EAL: Skip lcore 27 (not detected) EAL: Skip lcore 28 (not detected) EAL: Skip lcore 29 (not detected) EAL: Skip lcore 30 (not detected) EAL: Skip lcore 31 (not detected) EAL: Skip lcore 32 (not detected) EAL: Skip lcore 33 (not detected) EAL: Skip lcore 34 (not detected) EAL: Skip lcore 35 (not detected) EAL: Skip lcore 36 (not detected) EAL: Skip lcore 37 (not detected) EAL: Skip lcore 38 (not detected) EAL: Skip lcore 39 (not detected) EAL: Skip lcore 40 (not detected) EAL: Skip lcore 41 (not detected) EAL: Skip lcore 42 (not detected) EAL: Skip lcore 43 (not detected) EAL: Skip lcore 44 (not detected) EAL: Skip lcore 45 (not detected) EAL: Skip lcore 46 (not detected) EAL: Skip lcore 47 (not detected) EAL: Skip lcore 48 (not detected) EAL: Skip lcore 49 (not detected) EAL: Skip lcore 50 (not detected) EAL: Skip lcore 51 (not detected) EAL: Skip lcore 52 (not detected) EAL: Skip lcore 53 (not detected) EAL: Skip lcore 54 (not detected) EAL: Skip lcore 55 (not detected) EAL: Skip lcore 56 (not detected) EAL: Skip lcore 57 (not detected) EAL: Skip lcore 58 (not detected) EAL: Skip lcore 59 (not detected) EAL: Skip lcore 60 (not detected) EAL: Skip lcore 61 (not detected) EAL: Skip lcore 62 (not detected) EAL: Skip lcore 63 (not detected) EAL: Setting up memory... EAL: Ask a virtual area of 0x1073741824 bytes EAL: Virtual area found at 0x7f7dff000000 (size = 0x40000000) EAL: Ask a virtual area of 0x1073741824 bytes EAL: Virtual area found at 0x7f7dbee00000 (size = 0x40000000) EAL: Requesting 512 pages of size 2MB from socket 0 EAL: Requesting 512 pages of size 2MB from socket 1 EAL: TSC frequency is ~1200000 KHz EAL: Master core 0 is ready (tid=4025a840) EAL: Core 1 is ready (tid=be1f2700) EAL: Core 4 is ready (tid=bc9ef700) EAL: Core 6 is ready (tid=bb9ed700) EAL: Core 3 is ready (tid=bd1f0700) EAL: Core 7 is ready (tid=bb1ec700) EAL: Core 5 is ready (tid=bc1ee700) EAL: Core 2 is ready (tid=bd9f1700) EAL: PCI device 0000:06:00.0 on NUMA socket 0 EAL: probe driver: 8086:10fb rte_ixgbe_pmd EAL: PCI memory mapped at 0x7f7e401a7000 EAL: PCI memory mapped at 0x7f7e4026d000 EAL: PCI device 0000:06:00.1 on NUMA socket 0 EAL: probe driver: 8086:10fb rte_ixgbe_pmd EAL: PCI memory mapped at 0x7f7e40127000 EAL: PCI memory mapped at 0x7f7e40269000 EAL: PCI device 0000:08:00.1 on NUMA socket 0 EAL: probe driver: 8086:438 rte_igb_pmd EAL: 0000:08:00.1 not managed by UIO driver, skipping EAL: PCI device 0000:08:00.2 on NUMA socket 0 EAL: probe driver: 8086:438 rte_igb_pmd EAL: 0000:08:00.2 not managed by UIO driver, skipping EAL: PCI device 0000:08:00.3 on NUMA socket 0 EAL: probe driver: 8086:438 rte_igb_pmd EAL: 0000:08:00.3 not managed by UIO driver, skipping EAL: PCI device 0000:08:00.4 on NUMA socket 0 EAL: probe driver: 8086:438 rte_igb_pmd EAL: 0000:08:00.4 not managed by UIO driver, skipping EAL: PCI device 0000:09:00.0 on NUMA socket 0 EAL: probe driver: 8086:1521 rte_igb_pmd EAL: 0000:09:00.0 not managed by UIO driver, skipping EAL: PCI device 0000:09:00.1 on NUMA socket 0 EAL: probe driver: 8086:1521 rte_igb_pmd EAL: 0000:09:00.1 not managed by UIO driver, skipping EAL: PCI device 0000:09:00.2 on NUMA socket 0 EAL: probe driver: 8086:1521 rte_igb_pmd EAL: 0000:09:00.2 not managed by UIO driver, skipping EAL: PCI device 0000:09:00.3 on NUMA socket 0 EAL: probe driver: 8086:1521 rte_igb_pmd EAL: 0000:09:00.3 not managed by UIO driver, skipping EAL: PCI device 0000:85:00.0 on NUMA socket 1 EAL: probe driver: 8086:10fb rte_ixgbe_pmd EAL: 0000:85:00.0 not managed by UIO driver, skipping EAL: PCI device 0000:85:00.1 on NUMA socket 1 EAL: probe driver: 8086:10fb rte_ixgbe_pmd EAL: 0000:85:00.1 not managed by UIO driver, skipping EAL: Error - exiting with code: 1 Cause: No Ethernet ports - bye -------------------------------------------------------------- Intel Shannon Limited Registered in Ireland Registered Office: Collinstown Industrial Park, Leixlip, County Kildare Registered Number: 308263 Business address: Dromore House, East Park, Shannon, Co. Clare This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <2601191342CEEE43887BDE71AB97725808E6ACA7-kPTMFJFq+rEu0RiL9chJVbfspsVTdybXVpNB7YpNyf8@public.gmane.org>]
* Re: Unusable interfaces although apparently attached to IGB_UIO [not found] ` <2601191342CEEE43887BDE71AB97725808E6ACA7-kPTMFJFq+rEu0RiL9chJVbfspsVTdybXVpNB7YpNyf8@public.gmane.org> @ 2014-02-25 13:27 ` Marc Sune [not found] ` <530C9A46.2010504-kpkqNMk1I7M@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: Marc Sune @ 2014-02-25 13:27 UTC (permalink / raw) To: Ananyev, Konstantin; +Cc: <dev-VfR2kkLFssw@public.gmane.org> Thank you, This is the summary: 9241 PMD: ixgbe_reset_pipeline_82599(): auto negotiation not completed 9242 9243 PMD: ixgbe_setup_sfp_modules_82599(): sfp module setup not complete 9244 9245 PMD: ixgbe_check_mac_link_generic(): ixgbe_check_mac_link_generic 9246 PMD: ixgbe_get_mac_addr_generic(): ixgbe_get_mac_addr_generic 9247 PMD: ixgbe_init_rx_addrs_generic(): ixgbe_init_rx_addrs_generic 9248 PMD: ixgbe_validate_mac_addr(): ixgbe_validate_mac_addr 9249 PMD: ixgbe_validate_mac_addr(): MAC address is all zeros 9250 9251 PMD: ixgbe_get_mac_addr_generic(): ixgbe_get_mac_addr_generic 9252 PMD: ixgbe_init_rx_addrs_generic(): Keeping Current RAR0 Addr =90 E2 BA 9253 PMD: ixgbe_init_rx_addrs_generic(): 00 5F E5 9254 9255 PMD: ixgbe_init_rx_addrs_generic(): Clearing RAR[1-127] 9256 9257 PMD: ixgbe_init_rx_addrs_generic(): Clearing MTA 9258 9259 PMD: ixgbe_init_uta_tables_generic(): ixgbe_init_uta_tables_generic 9260 PMD: ixgbe_init_uta_tables_generic(): Clearing UTA 9261 9262 PMD: ixgbe_get_san_mac_addr_generic(): ixgbe_get_san_mac_addr_generic 9263 PMD: ixgbe_get_san_mac_addr_offset(): ixgbe_get_san_mac_addr_offset 9264 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9265 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9266 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9267 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9268 PMD: ixgbe_set_lan_id_multi_port_pcie(): ixgbe_set_lan_id_multi_port_pcie 9269 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9270 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9271 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9272 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9273 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9274 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9275 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9276 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9277 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9278 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9279 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9280 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9281 PMD: ixgbe_validate_mac_addr(): ixgbe_validate_mac_addr 9282 PMD: ixgbe_set_rar_generic(): ixgbe_set_rar_generic 9283 PMD: ixgbe_set_vmdq_generic(): ixgbe_set_vmdq_generic 9284 PMD: ixgbe_get_wwn_prefix_generic(): ixgbe_get_wwn_prefix_generic 9285 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9286 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9287 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9288 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9289 PMD: ixgbe_get_media_type_82599(): ixgbe_get_media_type_82599 9290 PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -30 A quick grep over the DPDK code; 58:84221:lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h:3189:#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30 It turns out that the 1G ports are also using SFPs, so this may explain why in both 1g and 10g ports the same behaviour happens. Any idea? Thank you and regards marc On 25/02/14 14:00, Ananyev, Konstantin wrote: > Hi, > > Probably try to rebuild with CONFIG_RTE_LIBRTE_IXGBE_DEBUG_*=y and rerun? > Might be it would give you some insight what is going wrong. > > Konstantin > > -----Original Message----- > From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Marc Sune > Sent: Tuesday, February 25, 2014 12:20 PM > To: <dev-VfR2kkLFssw@public.gmane.org> > Subject: [dpdk-dev] Unusable interfaces although apparently attached to IGB_UIO > > Dear all, > > We've been experiencing problems with interfaces being recognised by DPDK since some time now, I think since the very begining we started using DPDK (aprox. 1.3). Randomly, even on a fresh reboot (after > modprobe->attach->launch dpdk_app), and properly attached to the IGB_UIO > kmod [0], interfaces do appear in the "probe stage" of the respective driver during RTE* initialization, but DPDK complains there are no DPDK-enabled interfaces [1]. > > It even happens with the examples provided [1]. Once they enter in this "zombie state", there is no way to recover them unless a reboot is performed. Attaching igb_uio -> igb -> gb_uio does not solve it either. > This happens also with 1G copper ports. > > Any ideas? > > Thanks and regards > marc > > p.s. Using 1.5.2 branch right now > > ------------------------- > > [0] setup.sh > > Option: 10 > > > Network devices using IGB_UIO driver > ==================================== > 0000:06:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' > drv=igb_uio unused= > 0000:06:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' > drv=igb_uio unused= > > Network devices using kernel driver > =================================== > 0000:08:00.1 'DH8900CC Series Gigabit Network Connection' if=eth3 drv=igb unused=igb_uio > 0000:08:00.2 'DH8900CC Series Gigabit Network Connection' if=eth5 drv=igb unused=igb_uio > 0000:08:00.3 'DH8900CC Series Gigabit Network Connection' if=eth6 drv=igb unused=igb_uio > 0000:08:00.4 'DH8900CC Series Gigabit Network Connection' if=eth7 drv=igb unused=igb_uio > 0000:09:00.0 'I350 Gigabit Network Connection' if=eth8 drv=igb unused=igb_uio *Active* > 0000:09:00.1 'I350 Gigabit Network Connection' if=eth9 drv=igb unused=igb_uio *Active* > 0000:09:00.2 'I350 Gigabit Network Connection' if=eth10 drv=igb unused=igb_uio > 0000:09:00.3 'I350 Gigabit Network Connection' if=eth11 drv=igb unused=igb_uio > 0000:85:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth2 drv=ixgbe unused=igb_uio > 0000:85:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth4 drv=ixgbe unused=igb_uio > > Other network devices > ===================== > <none> > > Enter PCI address of device to bind to IGB UIO driver: > > > [1] l2fwd > > marc@bertha-dpdk:~/dpdk/examples/l2fwd/build$ sudo ./l2fwd -c 0xFF -n 2 > EAL: Detected lcore 0 as core 0 on socket 0 > EAL: Detected lcore 1 as core 1 on socket 0 > EAL: Detected lcore 2 as core 2 on socket 0 > EAL: Detected lcore 3 as core 3 on socket 0 > EAL: Detected lcore 4 as core 4 on socket 0 > EAL: Detected lcore 5 as core 5 on socket 0 > EAL: Detected lcore 6 as core 6 on socket 0 > EAL: Detected lcore 7 as core 7 on socket 0 > EAL: Detected lcore 8 as core 0 on socket 1 > EAL: Detected lcore 9 as core 1 on socket 1 > EAL: Detected lcore 10 as core 2 on socket 1 > EAL: Detected lcore 11 as core 3 on socket 1 > EAL: Detected lcore 12 as core 4 on socket 1 > EAL: Detected lcore 13 as core 5 on socket 1 > EAL: Detected lcore 14 as core 6 on socket 1 > EAL: Detected lcore 15 as core 7 on socket 1 > EAL: Skip lcore 16 (not detected) > EAL: Skip lcore 17 (not detected) > EAL: Skip lcore 18 (not detected) > EAL: Skip lcore 19 (not detected) > EAL: Skip lcore 20 (not detected) > EAL: Skip lcore 21 (not detected) > EAL: Skip lcore 22 (not detected) > EAL: Skip lcore 23 (not detected) > EAL: Skip lcore 24 (not detected) > EAL: Skip lcore 25 (not detected) > EAL: Skip lcore 26 (not detected) > EAL: Skip lcore 27 (not detected) > EAL: Skip lcore 28 (not detected) > EAL: Skip lcore 29 (not detected) > EAL: Skip lcore 30 (not detected) > EAL: Skip lcore 31 (not detected) > EAL: Skip lcore 32 (not detected) > EAL: Skip lcore 33 (not detected) > EAL: Skip lcore 34 (not detected) > EAL: Skip lcore 35 (not detected) > EAL: Skip lcore 36 (not detected) > EAL: Skip lcore 37 (not detected) > EAL: Skip lcore 38 (not detected) > EAL: Skip lcore 39 (not detected) > EAL: Skip lcore 40 (not detected) > EAL: Skip lcore 41 (not detected) > EAL: Skip lcore 42 (not detected) > EAL: Skip lcore 43 (not detected) > EAL: Skip lcore 44 (not detected) > EAL: Skip lcore 45 (not detected) > EAL: Skip lcore 46 (not detected) > EAL: Skip lcore 47 (not detected) > EAL: Skip lcore 48 (not detected) > EAL: Skip lcore 49 (not detected) > EAL: Skip lcore 50 (not detected) > EAL: Skip lcore 51 (not detected) > EAL: Skip lcore 52 (not detected) > EAL: Skip lcore 53 (not detected) > EAL: Skip lcore 54 (not detected) > EAL: Skip lcore 55 (not detected) > EAL: Skip lcore 56 (not detected) > EAL: Skip lcore 57 (not detected) > EAL: Skip lcore 58 (not detected) > EAL: Skip lcore 59 (not detected) > EAL: Skip lcore 60 (not detected) > EAL: Skip lcore 61 (not detected) > EAL: Skip lcore 62 (not detected) > EAL: Skip lcore 63 (not detected) > EAL: Setting up memory... > EAL: Ask a virtual area of 0x1073741824 bytes > EAL: Virtual area found at 0x7f7dff000000 (size = 0x40000000) > EAL: Ask a virtual area of 0x1073741824 bytes > EAL: Virtual area found at 0x7f7dbee00000 (size = 0x40000000) > EAL: Requesting 512 pages of size 2MB from socket 0 > EAL: Requesting 512 pages of size 2MB from socket 1 > EAL: TSC frequency is ~1200000 KHz > EAL: Master core 0 is ready (tid=4025a840) > EAL: Core 1 is ready (tid=be1f2700) > EAL: Core 4 is ready (tid=bc9ef700) > EAL: Core 6 is ready (tid=bb9ed700) > EAL: Core 3 is ready (tid=bd1f0700) > EAL: Core 7 is ready (tid=bb1ec700) > EAL: Core 5 is ready (tid=bc1ee700) > EAL: Core 2 is ready (tid=bd9f1700) > EAL: PCI device 0000:06:00.0 on NUMA socket 0 > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > EAL: PCI memory mapped at 0x7f7e401a7000 > EAL: PCI memory mapped at 0x7f7e4026d000 > EAL: PCI device 0000:06:00.1 on NUMA socket 0 > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > EAL: PCI memory mapped at 0x7f7e40127000 > EAL: PCI memory mapped at 0x7f7e40269000 > EAL: PCI device 0000:08:00.1 on NUMA socket 0 > EAL: probe driver: 8086:438 rte_igb_pmd > EAL: 0000:08:00.1 not managed by UIO driver, skipping > EAL: PCI device 0000:08:00.2 on NUMA socket 0 > EAL: probe driver: 8086:438 rte_igb_pmd > EAL: 0000:08:00.2 not managed by UIO driver, skipping > EAL: PCI device 0000:08:00.3 on NUMA socket 0 > EAL: probe driver: 8086:438 rte_igb_pmd > EAL: 0000:08:00.3 not managed by UIO driver, skipping > EAL: PCI device 0000:08:00.4 on NUMA socket 0 > EAL: probe driver: 8086:438 rte_igb_pmd > EAL: 0000:08:00.4 not managed by UIO driver, skipping > EAL: PCI device 0000:09:00.0 on NUMA socket 0 > EAL: probe driver: 8086:1521 rte_igb_pmd > EAL: 0000:09:00.0 not managed by UIO driver, skipping > EAL: PCI device 0000:09:00.1 on NUMA socket 0 > EAL: probe driver: 8086:1521 rte_igb_pmd > EAL: 0000:09:00.1 not managed by UIO driver, skipping > EAL: PCI device 0000:09:00.2 on NUMA socket 0 > EAL: probe driver: 8086:1521 rte_igb_pmd > EAL: 0000:09:00.2 not managed by UIO driver, skipping > EAL: PCI device 0000:09:00.3 on NUMA socket 0 > EAL: probe driver: 8086:1521 rte_igb_pmd > EAL: 0000:09:00.3 not managed by UIO driver, skipping > EAL: PCI device 0000:85:00.0 on NUMA socket 1 > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > EAL: 0000:85:00.0 not managed by UIO driver, skipping > EAL: PCI device 0000:85:00.1 on NUMA socket 1 > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > EAL: 0000:85:00.1 not managed by UIO driver, skipping > EAL: Error - exiting with code: 1 > Cause: No Ethernet ports - bye > > -------------------------------------------------------------- > Intel Shannon Limited > Registered in Ireland > Registered Office: Collinstown Industrial Park, Leixlip, County Kildare > Registered Number: 308263 > Business address: Dromore House, East Park, Shannon, Co. Clare > > This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. > > ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <530C9A46.2010504-kpkqNMk1I7M@public.gmane.org>]
* Re: Unusable interfaces although apparently attached to IGB_UIO [not found] ` <530C9A46.2010504-kpkqNMk1I7M@public.gmane.org> @ 2014-02-25 13:36 ` Thomas Monjalon 2014-02-26 13:03 ` Ananyev, Konstantin 1 sibling, 0 replies; 5+ messages in thread From: Thomas Monjalon @ 2014-02-25 13:36 UTC (permalink / raw) To: Marc Sune; +Cc: dev-VfR2kkLFssw 25/02/2014 14:27, Marc Sune: > 9290 PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -30 > > A quick grep over the DPDK code; > > 58:84221:lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h:3189:#define > IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30 This problem arises when frequency is changing. There was many threads discussing it but there is no definitive solution. I recommend disabling frequency scaling. But a fix would be welcome. -- Thomas ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Unusable interfaces although apparently attached to IGB_UIO [not found] ` <530C9A46.2010504-kpkqNMk1I7M@public.gmane.org> 2014-02-25 13:36 ` Thomas Monjalon @ 2014-02-26 13:03 ` Ananyev, Konstantin 1 sibling, 0 replies; 5+ messages in thread From: Ananyev, Konstantin @ 2014-02-26 13:03 UTC (permalink / raw) To: Marc Sune; +Cc: <dev-VfR2kkLFssw@public.gmane.org> Hi, >From the log it seems that it is failing at: ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw) { ... IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg ^ IXGBE_AUTOC_LMS_1G_AN); /* Wait for AN to leave state 0 */ for (i = 0; i < 10; i++) { msec_delay(4); anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK) break; } if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) { DEBUGOUT("auto negotiation not completed\n"); ret_val = IXGBE_ERR_RESET_FAILED; goto reset_pipeline_out; } I personally never experienced such problem, but I saw mails from other people at dpdk.org complaining about the similiar problem: http://search.gmane.org/?query=ixgbe_reset_pipeline_82599&group=gmane.comp.networking.dpdk.devel As I remember, some of them just increased timeout and/or number of iterations in the loop above and that made the problem go away. Could you give it a try to see would it help? Konstantin -----Original Message----- From: Marc Sune [mailto:marc.sune-kpkqNMk1I7M@public.gmane.org] Sent: Tuesday, February 25, 2014 1:28 PM To: Ananyev, Konstantin Cc: <dev-VfR2kkLFssw@public.gmane.org> Subject: Re: [dpdk-dev] Unusable interfaces although apparently attached to IGB_UIO Thank you, This is the summary: 9241 PMD: ixgbe_reset_pipeline_82599(): auto negotiation not completed 9242 9243 PMD: ixgbe_setup_sfp_modules_82599(): sfp module setup not complete 9244 9245 PMD: ixgbe_check_mac_link_generic(): ixgbe_check_mac_link_generic 9246 PMD: ixgbe_get_mac_addr_generic(): ixgbe_get_mac_addr_generic 9247 PMD: ixgbe_init_rx_addrs_generic(): ixgbe_init_rx_addrs_generic 9248 PMD: ixgbe_validate_mac_addr(): ixgbe_validate_mac_addr 9249 PMD: ixgbe_validate_mac_addr(): MAC address is all zeros 9250 9251 PMD: ixgbe_get_mac_addr_generic(): ixgbe_get_mac_addr_generic 9252 PMD: ixgbe_init_rx_addrs_generic(): Keeping Current RAR0 Addr =90 E2 BA 9253 PMD: ixgbe_init_rx_addrs_generic(): 00 5F E5 9254 9255 PMD: ixgbe_init_rx_addrs_generic(): Clearing RAR[1-127] 9256 9257 PMD: ixgbe_init_rx_addrs_generic(): Clearing MTA 9258 9259 PMD: ixgbe_init_uta_tables_generic(): ixgbe_init_uta_tables_generic 9260 PMD: ixgbe_init_uta_tables_generic(): Clearing UTA 9261 9262 PMD: ixgbe_get_san_mac_addr_generic(): ixgbe_get_san_mac_addr_generic 9263 PMD: ixgbe_get_san_mac_addr_offset(): ixgbe_get_san_mac_addr_offset 9264 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9265 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9266 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9267 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9268 PMD: ixgbe_set_lan_id_multi_port_pcie(): ixgbe_set_lan_id_multi_port_pcie 9269 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9270 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9271 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9272 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9273 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9274 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9275 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9276 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9277 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9278 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9279 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9280 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9281 PMD: ixgbe_validate_mac_addr(): ixgbe_validate_mac_addr 9282 PMD: ixgbe_set_rar_generic(): ixgbe_set_rar_generic 9283 PMD: ixgbe_set_vmdq_generic(): ixgbe_set_vmdq_generic 9284 PMD: ixgbe_get_wwn_prefix_generic(): ixgbe_get_wwn_prefix_generic 9285 PMD: ixgbe_read_eeprom_82599(): ixgbe_read_eeprom_82599 9286 PMD: ixgbe_read_eerd_buffer_generic(): ixgbe_read_eerd_buffer_generic 9287 PMD: ixgbe_init_eeprom_params_generic(): ixgbe_init_eeprom_params_generic 9288 PMD: ixgbe_poll_eerd_eewr_done(): ixgbe_poll_eerd_eewr_done 9289 PMD: ixgbe_get_media_type_82599(): ixgbe_get_media_type_82599 9290 PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -30 A quick grep over the DPDK code; 58:84221:lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h:3189:#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30 It turns out that the 1G ports are also using SFPs, so this may explain why in both 1g and 10g ports the same behaviour happens. Any idea? Thank you and regards marc On 25/02/14 14:00, Ananyev, Konstantin wrote: > Hi, > > Probably try to rebuild with CONFIG_RTE_LIBRTE_IXGBE_DEBUG_*=y and rerun? > Might be it would give you some insight what is going wrong. > > Konstantin > > -----Original Message----- > From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Marc Sune > Sent: Tuesday, February 25, 2014 12:20 PM > To: <dev-VfR2kkLFssw@public.gmane.org> > Subject: [dpdk-dev] Unusable interfaces although apparently attached > to IGB_UIO > > Dear all, > > We've been experiencing problems with interfaces being recognised by > DPDK since some time now, I think since the very begining we started > using DPDK (aprox. 1.3). Randomly, even on a fresh reboot (after > modprobe->attach->launch dpdk_app), and properly attached to the > modprobe->attach->IGB_UIO > kmod [0], interfaces do appear in the "probe stage" of the respective driver during RTE* initialization, but DPDK complains there are no DPDK-enabled interfaces [1]. > > It even happens with the examples provided [1]. Once they enter in this "zombie state", there is no way to recover them unless a reboot is performed. Attaching igb_uio -> igb -> gb_uio does not solve it either. > This happens also with 1G copper ports. > > Any ideas? > > Thanks and regards > marc > > p.s. Using 1.5.2 branch right now > > ------------------------- > > [0] setup.sh > > Option: 10 > > > Network devices using IGB_UIO driver > ==================================== > 0000:06:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' > drv=igb_uio unused= > 0000:06:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' > drv=igb_uio unused= > > Network devices using kernel driver > =================================== > 0000:08:00.1 'DH8900CC Series Gigabit Network Connection' if=eth3 > drv=igb unused=igb_uio > 0000:08:00.2 'DH8900CC Series Gigabit Network Connection' if=eth5 > drv=igb unused=igb_uio > 0000:08:00.3 'DH8900CC Series Gigabit Network Connection' if=eth6 > drv=igb unused=igb_uio > 0000:08:00.4 'DH8900CC Series Gigabit Network Connection' if=eth7 > drv=igb unused=igb_uio > 0000:09:00.0 'I350 Gigabit Network Connection' if=eth8 drv=igb > unused=igb_uio *Active* > 0000:09:00.1 'I350 Gigabit Network Connection' if=eth9 drv=igb > unused=igb_uio *Active* > 0000:09:00.2 'I350 Gigabit Network Connection' if=eth10 drv=igb > unused=igb_uio > 0000:09:00.3 'I350 Gigabit Network Connection' if=eth11 drv=igb > unused=igb_uio > 0000:85:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth2 > drv=ixgbe unused=igb_uio > 0000:85:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth4 > drv=ixgbe unused=igb_uio > > Other network devices > ===================== > <none> > > Enter PCI address of device to bind to IGB UIO driver: > > > [1] l2fwd > > marc@bertha-dpdk:~/dpdk/examples/l2fwd/build$ sudo ./l2fwd -c 0xFF -n > 2 > EAL: Detected lcore 0 as core 0 on socket 0 > EAL: Detected lcore 1 as core 1 on socket 0 > EAL: Detected lcore 2 as core 2 on socket 0 > EAL: Detected lcore 3 as core 3 on socket 0 > EAL: Detected lcore 4 as core 4 on socket 0 > EAL: Detected lcore 5 as core 5 on socket 0 > EAL: Detected lcore 6 as core 6 on socket 0 > EAL: Detected lcore 7 as core 7 on socket 0 > EAL: Detected lcore 8 as core 0 on socket 1 > EAL: Detected lcore 9 as core 1 on socket 1 > EAL: Detected lcore 10 as core 2 on socket 1 > EAL: Detected lcore 11 as core 3 on socket 1 > EAL: Detected lcore 12 as core 4 on socket 1 > EAL: Detected lcore 13 as core 5 on socket 1 > EAL: Detected lcore 14 as core 6 on socket 1 > EAL: Detected lcore 15 as core 7 on socket 1 > EAL: Skip lcore 16 (not detected) > EAL: Skip lcore 17 (not detected) > EAL: Skip lcore 18 (not detected) > EAL: Skip lcore 19 (not detected) > EAL: Skip lcore 20 (not detected) > EAL: Skip lcore 21 (not detected) > EAL: Skip lcore 22 (not detected) > EAL: Skip lcore 23 (not detected) > EAL: Skip lcore 24 (not detected) > EAL: Skip lcore 25 (not detected) > EAL: Skip lcore 26 (not detected) > EAL: Skip lcore 27 (not detected) > EAL: Skip lcore 28 (not detected) > EAL: Skip lcore 29 (not detected) > EAL: Skip lcore 30 (not detected) > EAL: Skip lcore 31 (not detected) > EAL: Skip lcore 32 (not detected) > EAL: Skip lcore 33 (not detected) > EAL: Skip lcore 34 (not detected) > EAL: Skip lcore 35 (not detected) > EAL: Skip lcore 36 (not detected) > EAL: Skip lcore 37 (not detected) > EAL: Skip lcore 38 (not detected) > EAL: Skip lcore 39 (not detected) > EAL: Skip lcore 40 (not detected) > EAL: Skip lcore 41 (not detected) > EAL: Skip lcore 42 (not detected) > EAL: Skip lcore 43 (not detected) > EAL: Skip lcore 44 (not detected) > EAL: Skip lcore 45 (not detected) > EAL: Skip lcore 46 (not detected) > EAL: Skip lcore 47 (not detected) > EAL: Skip lcore 48 (not detected) > EAL: Skip lcore 49 (not detected) > EAL: Skip lcore 50 (not detected) > EAL: Skip lcore 51 (not detected) > EAL: Skip lcore 52 (not detected) > EAL: Skip lcore 53 (not detected) > EAL: Skip lcore 54 (not detected) > EAL: Skip lcore 55 (not detected) > EAL: Skip lcore 56 (not detected) > EAL: Skip lcore 57 (not detected) > EAL: Skip lcore 58 (not detected) > EAL: Skip lcore 59 (not detected) > EAL: Skip lcore 60 (not detected) > EAL: Skip lcore 61 (not detected) > EAL: Skip lcore 62 (not detected) > EAL: Skip lcore 63 (not detected) > EAL: Setting up memory... > EAL: Ask a virtual area of 0x1073741824 bytes > EAL: Virtual area found at 0x7f7dff000000 (size = 0x40000000) > EAL: Ask a virtual area of 0x1073741824 bytes > EAL: Virtual area found at 0x7f7dbee00000 (size = 0x40000000) > EAL: Requesting 512 pages of size 2MB from socket 0 > EAL: Requesting 512 pages of size 2MB from socket 1 > EAL: TSC frequency is ~1200000 KHz > EAL: Master core 0 is ready (tid=4025a840) > EAL: Core 1 is ready (tid=be1f2700) > EAL: Core 4 is ready (tid=bc9ef700) > EAL: Core 6 is ready (tid=bb9ed700) > EAL: Core 3 is ready (tid=bd1f0700) > EAL: Core 7 is ready (tid=bb1ec700) > EAL: Core 5 is ready (tid=bc1ee700) > EAL: Core 2 is ready (tid=bd9f1700) > EAL: PCI device 0000:06:00.0 on NUMA socket 0 > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > EAL: PCI memory mapped at 0x7f7e401a7000 > EAL: PCI memory mapped at 0x7f7e4026d000 > EAL: PCI device 0000:06:00.1 on NUMA socket 0 > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > EAL: PCI memory mapped at 0x7f7e40127000 > EAL: PCI memory mapped at 0x7f7e40269000 > EAL: PCI device 0000:08:00.1 on NUMA socket 0 > EAL: probe driver: 8086:438 rte_igb_pmd > EAL: 0000:08:00.1 not managed by UIO driver, skipping > EAL: PCI device 0000:08:00.2 on NUMA socket 0 > EAL: probe driver: 8086:438 rte_igb_pmd > EAL: 0000:08:00.2 not managed by UIO driver, skipping > EAL: PCI device 0000:08:00.3 on NUMA socket 0 > EAL: probe driver: 8086:438 rte_igb_pmd > EAL: 0000:08:00.3 not managed by UIO driver, skipping > EAL: PCI device 0000:08:00.4 on NUMA socket 0 > EAL: probe driver: 8086:438 rte_igb_pmd > EAL: 0000:08:00.4 not managed by UIO driver, skipping > EAL: PCI device 0000:09:00.0 on NUMA socket 0 > EAL: probe driver: 8086:1521 rte_igb_pmd > EAL: 0000:09:00.0 not managed by UIO driver, skipping > EAL: PCI device 0000:09:00.1 on NUMA socket 0 > EAL: probe driver: 8086:1521 rte_igb_pmd > EAL: 0000:09:00.1 not managed by UIO driver, skipping > EAL: PCI device 0000:09:00.2 on NUMA socket 0 > EAL: probe driver: 8086:1521 rte_igb_pmd > EAL: 0000:09:00.2 not managed by UIO driver, skipping > EAL: PCI device 0000:09:00.3 on NUMA socket 0 > EAL: probe driver: 8086:1521 rte_igb_pmd > EAL: 0000:09:00.3 not managed by UIO driver, skipping > EAL: PCI device 0000:85:00.0 on NUMA socket 1 > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > EAL: 0000:85:00.0 not managed by UIO driver, skipping > EAL: PCI device 0000:85:00.1 on NUMA socket 1 > EAL: probe driver: 8086:10fb rte_ixgbe_pmd > EAL: 0000:85:00.1 not managed by UIO driver, skipping > EAL: Error - exiting with code: 1 > Cause: No Ethernet ports - bye > > -------------------------------------------------------------- > Intel Shannon Limited > Registered in Ireland > Registered Office: Collinstown Industrial Park, Leixlip, County > Kildare Registered Number: 308263 Business address: Dromore House, > East Park, Shannon, Co. Clare > > This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. > > -------------------------------------------------------------- Intel Shannon Limited Registered in Ireland Registered Office: Collinstown Industrial Park, Leixlip, County Kildare Registered Number: 308263 Business address: Dromore House, East Park, Shannon, Co. Clare This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-02-26 13:03 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-25 12:20 Unusable interfaces although apparently attached to IGB_UIO Marc Sune
[not found] ` <530C8A76.5040701-kpkqNMk1I7M@public.gmane.org>
2014-02-25 13:00 ` Ananyev, Konstantin
[not found] ` <2601191342CEEE43887BDE71AB97725808E6ACA7-kPTMFJFq+rEu0RiL9chJVbfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-02-25 13:27 ` Marc Sune
[not found] ` <530C9A46.2010504-kpkqNMk1I7M@public.gmane.org>
2014-02-25 13:36 ` Thomas Monjalon
2014-02-26 13:03 ` Ananyev, Konstantin
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.