* [PATCH V5 0/8] libgpiod: Add Rust bindings
@ 2022-08-02 12:18 Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 1/8] libgpiod: Add libgpiod-sys rust crate Viresh Kumar
` (8 more replies)
0 siblings, 9 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
Hello,
Here is another version of rust bindings for libgpiod v2.0, based of the
next/libgpiod-2.0.
Pushed here:
https://github.com/vireshk/libgpiod master
Kent, I hope I haven't missed any of your comments, there were too many of them.
Thanks for your review.
V4->V5:
- Arrange as workspace with crates for libgpiod-sys, libgpiod, gpiosim.
- Use static libgpiod and libgpiosim libraries instead of rebuilding again.
- Arrange in modules instead of flattened approach.
- New enums like Setting and SettingKind and new types based on them SettingMap
and SettingKindMap.
- New property independent helpers for line_config, like set_prop_default().
- Improved tests/examples, new example for gpiowatch.
- Add pre-built bindings for gpiosim too.
- Many other changes.
V3->V4:
- Rebased on top of new changes, and made changes accordingly.
- Added rust integration tests with gpiosim.
- Found a kernel bug with tests, sent a patch for that to LKML.
V2->V3:
- Remove naming redundancy, users just need to do this now
use libgpiod:{Chip, Direction, LineConfig} now (Bartosz);
- Fix lifetime issues between event-buffer and edge-event modules, the event
buffer is released after the last edge-event reference is dropped (Bartosz).
- Allow edge-event to be copied, and freed later (Bartosz).
- Add two separate rust crates, sys and wrapper (Gerard).
- Null-terminate the strings passed to libgpiod (Wedson).
- Drop unnecessary checks to validate string returned from chip:name/label/path.
- Fix SAFETY comments (Wedson).
- Drop unnecessary clone() instances (Bartosz).
V1->V2:
- Added examples (I tested everything except gpiomon.rs, didn't have right
hardware/mock device to test).
- Build rust bindings as part of Make, update documentation.
Thanks.
--
Viresh
Viresh Kumar (8):
libgpiod: Add libgpiod-sys rust crate
libgpiod-sys: Add pre generated rust bindings
libgpiod: Add rust wrapper crate
libgpiod: Add rust examples
libgpiod: Add gpiosim rust crate
gpiosim: Add pre generated rust bindings
libgpiod: Add rust tests
libgpiod: Integrate building of rust bindings with make
.gitignore | 5 +
README | 8 +-
TODO | 8 -
bindings/Makefile.am | 6 +
bindings/rust/Cargo.toml | 7 +
bindings/rust/Makefile.am | 18 +
bindings/rust/gpiosim/Cargo.toml | 18 +
bindings/rust/gpiosim/README.md | 11 +
bindings/rust/gpiosim/build.rs | 43 +
bindings/rust/gpiosim/src/bindings.rs | 180 ++
bindings/rust/gpiosim/src/lib.rs | 25 +
bindings/rust/gpiosim/src/sim.rs | 323 ++++
bindings/rust/libgpiod-sys/Cargo.toml | 15 +
bindings/rust/libgpiod-sys/README.md | 11 +
bindings/rust/libgpiod-sys/build.rs | 41 +
bindings/rust/libgpiod-sys/src/bindings.rs | 1535 +++++++++++++++++
bindings/rust/libgpiod-sys/src/lib.rs | 13 +
bindings/rust/libgpiod/Cargo.toml | 16 +
bindings/rust/libgpiod/examples/gpiodetect.rs | 30 +
bindings/rust/libgpiod/examples/gpiofind.rs | 35 +
bindings/rust/libgpiod/examples/gpioget.rs | 44 +
bindings/rust/libgpiod/examples/gpioinfo.rs | 95 +
bindings/rust/libgpiod/examples/gpiomon.rs | 71 +
bindings/rust/libgpiod/examples/gpioset.rs | 64 +
bindings/rust/libgpiod/examples/gpiowatch.rs | 54 +
bindings/rust/libgpiod/src/chip.rs | 253 +++
bindings/rust/libgpiod/src/edge_event.rs | 102 ++
bindings/rust/libgpiod/src/event_buffer.rs | 90 +
bindings/rust/libgpiod/src/info_event.rs | 68 +
bindings/rust/libgpiod/src/lib.rs | 477 +++++
bindings/rust/libgpiod/src/line_config.rs | 586 +++++++
bindings/rust/libgpiod/src/line_info.rs | 180 ++
bindings/rust/libgpiod/src/line_request.rs | 246 +++
bindings/rust/libgpiod/src/request_config.rs | 119 ++
bindings/rust/libgpiod/tests/chip.rs | 97 ++
bindings/rust/libgpiod/tests/common/config.rs | 142 ++
bindings/rust/libgpiod/tests/common/mod.rs | 10 +
bindings/rust/libgpiod/tests/edge_event.rs | 294 ++++
bindings/rust/libgpiod/tests/info_event.rs | 120 ++
bindings/rust/libgpiod/tests/line_config.rs | 293 ++++
bindings/rust/libgpiod/tests/line_info.rs | 272 +++
bindings/rust/libgpiod/tests/line_request.rs | 473 +++++
.../rust/libgpiod/tests/request_config.rs | 42 +
configure.ac | 16 +
44 files changed, 6545 insertions(+), 11 deletions(-)
create mode 100644 bindings/rust/Cargo.toml
create mode 100644 bindings/rust/Makefile.am
create mode 100644 bindings/rust/gpiosim/Cargo.toml
create mode 100644 bindings/rust/gpiosim/README.md
create mode 100644 bindings/rust/gpiosim/build.rs
create mode 100644 bindings/rust/gpiosim/src/bindings.rs
create mode 100644 bindings/rust/gpiosim/src/lib.rs
create mode 100644 bindings/rust/gpiosim/src/sim.rs
create mode 100644 bindings/rust/libgpiod-sys/Cargo.toml
create mode 100644 bindings/rust/libgpiod-sys/README.md
create mode 100644 bindings/rust/libgpiod-sys/build.rs
create mode 100644 bindings/rust/libgpiod-sys/src/bindings.rs
create mode 100644 bindings/rust/libgpiod-sys/src/lib.rs
create mode 100644 bindings/rust/libgpiod/Cargo.toml
create mode 100644 bindings/rust/libgpiod/examples/gpiodetect.rs
create mode 100644 bindings/rust/libgpiod/examples/gpiofind.rs
create mode 100644 bindings/rust/libgpiod/examples/gpioget.rs
create mode 100644 bindings/rust/libgpiod/examples/gpioinfo.rs
create mode 100644 bindings/rust/libgpiod/examples/gpiomon.rs
create mode 100644 bindings/rust/libgpiod/examples/gpioset.rs
create mode 100644 bindings/rust/libgpiod/examples/gpiowatch.rs
create mode 100644 bindings/rust/libgpiod/src/chip.rs
create mode 100644 bindings/rust/libgpiod/src/edge_event.rs
create mode 100644 bindings/rust/libgpiod/src/event_buffer.rs
create mode 100644 bindings/rust/libgpiod/src/info_event.rs
create mode 100644 bindings/rust/libgpiod/src/lib.rs
create mode 100644 bindings/rust/libgpiod/src/line_config.rs
create mode 100644 bindings/rust/libgpiod/src/line_info.rs
create mode 100644 bindings/rust/libgpiod/src/line_request.rs
create mode 100644 bindings/rust/libgpiod/src/request_config.rs
create mode 100644 bindings/rust/libgpiod/tests/chip.rs
create mode 100644 bindings/rust/libgpiod/tests/common/config.rs
create mode 100644 bindings/rust/libgpiod/tests/common/mod.rs
create mode 100644 bindings/rust/libgpiod/tests/edge_event.rs
create mode 100644 bindings/rust/libgpiod/tests/info_event.rs
create mode 100644 bindings/rust/libgpiod/tests/line_config.rs
create mode 100644 bindings/rust/libgpiod/tests/line_info.rs
create mode 100644 bindings/rust/libgpiod/tests/line_request.rs
create mode 100644 bindings/rust/libgpiod/tests/request_config.rs
--
2.31.1.272.g89b43f80a514
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH V5 1/8] libgpiod: Add libgpiod-sys rust crate
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
@ 2022-08-02 12:18 ` Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 2/8] libgpiod-sys: Add pre generated rust bindings Viresh Kumar
` (7 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
This adds libgpiod-sys rust crate, which provides FFI (foreign function
interface) bindings for libgpiod APIs.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
.gitignore | 5 ++++
bindings/rust/Cargo.toml | 5 ++++
bindings/rust/libgpiod-sys/Cargo.toml | 15 ++++++++++
bindings/rust/libgpiod-sys/build.rs | 41 +++++++++++++++++++++++++++
bindings/rust/libgpiod-sys/src/lib.rs | 13 +++++++++
5 files changed, 79 insertions(+)
create mode 100644 bindings/rust/Cargo.toml
create mode 100644 bindings/rust/libgpiod-sys/Cargo.toml
create mode 100644 bindings/rust/libgpiod-sys/build.rs
create mode 100644 bindings/rust/libgpiod-sys/src/lib.rs
diff --git a/.gitignore b/.gitignore
index 58e1c5fc7e00..9541482d5efb 100644
--- a/.gitignore
+++ b/.gitignore
@@ -33,3 +33,8 @@ stamp-h1
# profiling
*.gcda
*.gcno
+
+# Added by cargo
+
+target
+Cargo.lock
diff --git a/bindings/rust/Cargo.toml b/bindings/rust/Cargo.toml
new file mode 100644
index 000000000000..d0b3a3c88ff1
--- /dev/null
+++ b/bindings/rust/Cargo.toml
@@ -0,0 +1,5 @@
+[workspace]
+
+members = [
+ "libgpiod-sys",
+]
diff --git a/bindings/rust/libgpiod-sys/Cargo.toml b/bindings/rust/libgpiod-sys/Cargo.toml
new file mode 100644
index 000000000000..77f82719d269
--- /dev/null
+++ b/bindings/rust/libgpiod-sys/Cargo.toml
@@ -0,0 +1,15 @@
+[package]
+name = "libgpiod-sys"
+version = "0.1.0"
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+
+[features]
+generate = [ "bindgen" ]
+
+[build-dependencies]
+bindgen = { version = "0.59.1", optional = true }
+cc = "1.0.46"
diff --git a/bindings/rust/libgpiod-sys/build.rs b/bindings/rust/libgpiod-sys/build.rs
new file mode 100644
index 000000000000..98863686c7af
--- /dev/null
+++ b/bindings/rust/libgpiod-sys/build.rs
@@ -0,0 +1,41 @@
+#[cfg(feature = "generate")]
+extern crate bindgen;
+#[cfg(feature = "generate")]
+use std::env;
+#[cfg(feature = "generate")]
+use std::path::PathBuf;
+
+#[cfg(feature = "generate")]
+fn generate_bindings() {
+ // Tell cargo to invalidate the built crate whenever following files change
+ println!("cargo:rerun-if-changed=../../../include/gpiod.h");
+
+ // The bindgen::Builder is the main entry point
+ // to bindgen, and lets you build up options for
+ // the resulting bindings.
+ let bindings = bindgen::Builder::default()
+ // The input header we would like to generate
+ // bindings for.
+ .header("../../../include/gpiod.h")
+ // Tell cargo to invalidate the built crate whenever any of the
+ // included header files changed.
+ .parse_callbacks(Box::new(bindgen::CargoCallbacks))
+ // Finish the builder and generate the bindings.
+ .generate()
+ // Unwrap the Result and panic on failure.
+ .expect("Unable to generate bindings");
+
+ // Write the bindings to the $OUT_DIR/bindings.rs file.
+ let out_path = PathBuf::from(env::var("OUT_DIR").unwrap());
+ bindings
+ .write_to_file(out_path.join("bindings.rs"))
+ .expect("Couldn't write bindings!");
+}
+
+fn main() {
+ #[cfg(feature = "generate")]
+ generate_bindings();
+
+ println!("cargo:rustc-link-search=./../../lib/.libs/");
+ println!("cargo:rustc-link-lib=static=gpiod");
+}
diff --git a/bindings/rust/libgpiod-sys/src/lib.rs b/bindings/rust/libgpiod-sys/src/lib.rs
new file mode 100644
index 000000000000..1ca355b5f5ac
--- /dev/null
+++ b/bindings/rust/libgpiod-sys/src/lib.rs
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#[allow(non_camel_case_types, non_upper_case_globals)]
+#[cfg_attr(test, allow(deref_nullptr, non_snake_case))]
+
+mod bindings_raw {
+ #[cfg(feature = "generate")]
+ include!(concat!(env!("OUT_DIR"), "/bindings.rs"));
+
+ #[cfg(not(feature = "generate"))]
+ include!("bindings.rs");
+}
+pub use bindings_raw::*;
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH V5 2/8] libgpiod-sys: Add pre generated rust bindings
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 1/8] libgpiod: Add libgpiod-sys rust crate Viresh Kumar
@ 2022-08-02 12:18 ` Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 3/8] libgpiod: Add rust wrapper crate Viresh Kumar
` (6 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
This adds a copy of pre generated bindings and adds the suggested way of
updating those in README.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
bindings/rust/libgpiod-sys/README.md | 11 +
bindings/rust/libgpiod-sys/src/bindings.rs | 1535 ++++++++++++++++++++
2 files changed, 1546 insertions(+)
create mode 100644 bindings/rust/libgpiod-sys/README.md
create mode 100644 bindings/rust/libgpiod-sys/src/bindings.rs
diff --git a/bindings/rust/libgpiod-sys/README.md b/bindings/rust/libgpiod-sys/README.md
new file mode 100644
index 000000000000..ecf75b31c41e
--- /dev/null
+++ b/bindings/rust/libgpiod-sys/README.md
@@ -0,0 +1,11 @@
+# Generated libgpiod-sys Rust FFI bindings
+Automatically generated Rust FFI bindings via
+ [bindgen](https://github.com/rust-lang/rust-bindgen).
+
+## Updating bindings
+1. Clone the source from
+ <https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/>
+2. run `cd libgpiod/bindings/rust/libgpiod-sys/`
+2. run `cargo build --features generate`
+3. Copy the bindings 'cp ../target/debug/build/libgpiod-sys-###/out/bindings.rs src/bindings.rs'
+4. Commit changes in `src/bindings.rs`
diff --git a/bindings/rust/libgpiod-sys/src/bindings.rs b/bindings/rust/libgpiod-sys/src/bindings.rs
new file mode 100644
index 000000000000..243f57712018
--- /dev/null
+++ b/bindings/rust/libgpiod-sys/src/bindings.rs
@@ -0,0 +1,1535 @@
+/* automatically generated by rust-bindgen 0.59.2 */
+
+pub const true_: u32 = 1;
+pub const false_: u32 = 0;
+pub const __bool_true_false_are_defined: u32 = 1;
+pub const _STDINT_H: u32 = 1;
+pub const _FEATURES_H: u32 = 1;
+pub const _DEFAULT_SOURCE: u32 = 1;
+pub const __GLIBC_USE_ISOC2X: u32 = 0;
+pub const __USE_ISOC11: u32 = 1;
+pub const __USE_ISOC99: u32 = 1;
+pub const __USE_ISOC95: u32 = 1;
+pub const __USE_POSIX_IMPLICITLY: u32 = 1;
+pub const _POSIX_SOURCE: u32 = 1;
+pub const _POSIX_C_SOURCE: u32 = 200809;
+pub const __USE_POSIX: u32 = 1;
+pub const __USE_POSIX2: u32 = 1;
+pub const __USE_POSIX199309: u32 = 1;
+pub const __USE_POSIX199506: u32 = 1;
+pub const __USE_XOPEN2K: u32 = 1;
+pub const __USE_XOPEN2K8: u32 = 1;
+pub const _ATFILE_SOURCE: u32 = 1;
+pub const __USE_MISC: u32 = 1;
+pub const __USE_ATFILE: u32 = 1;
+pub const __USE_FORTIFY_LEVEL: u32 = 0;
+pub const __GLIBC_USE_DEPRECATED_GETS: u32 = 0;
+pub const __GLIBC_USE_DEPRECATED_SCANF: u32 = 0;
+pub const _STDC_PREDEF_H: u32 = 1;
+pub const __STDC_IEC_559__: u32 = 1;
+pub const __STDC_IEC_559_COMPLEX__: u32 = 1;
+pub const __STDC_ISO_10646__: u32 = 201706;
+pub const __GNU_LIBRARY__: u32 = 6;
+pub const __GLIBC__: u32 = 2;
+pub const __GLIBC_MINOR__: u32 = 31;
+pub const _SYS_CDEFS_H: u32 = 1;
+pub const __glibc_c99_flexarr_available: u32 = 1;
+pub const __WORDSIZE: u32 = 64;
+pub const __WORDSIZE_TIME64_COMPAT32: u32 = 1;
+pub const __SYSCALL_WORDSIZE: u32 = 64;
+pub const __LONG_DOUBLE_USES_FLOAT128: u32 = 0;
+pub const __HAVE_GENERIC_SELECTION: u32 = 1;
+pub const __GLIBC_USE_LIB_EXT2: u32 = 0;
+pub const __GLIBC_USE_IEC_60559_BFP_EXT: u32 = 0;
+pub const __GLIBC_USE_IEC_60559_BFP_EXT_C2X: u32 = 0;
+pub const __GLIBC_USE_IEC_60559_FUNCS_EXT: u32 = 0;
+pub const __GLIBC_USE_IEC_60559_FUNCS_EXT_C2X: u32 = 0;
+pub const __GLIBC_USE_IEC_60559_TYPES_EXT: u32 = 0;
+pub const _BITS_TYPES_H: u32 = 1;
+pub const __TIMESIZE: u32 = 64;
+pub const _BITS_TYPESIZES_H: u32 = 1;
+pub const __OFF_T_MATCHES_OFF64_T: u32 = 1;
+pub const __INO_T_MATCHES_INO64_T: u32 = 1;
+pub const __RLIM_T_MATCHES_RLIM64_T: u32 = 1;
+pub const __STATFS_MATCHES_STATFS64: u32 = 1;
+pub const __FD_SETSIZE: u32 = 1024;
+pub const _BITS_TIME64_H: u32 = 1;
+pub const _BITS_WCHAR_H: u32 = 1;
+pub const _BITS_STDINT_INTN_H: u32 = 1;
+pub const _BITS_STDINT_UINTN_H: u32 = 1;
+pub const INT8_MIN: i32 = -128;
+pub const INT16_MIN: i32 = -32768;
+pub const INT32_MIN: i32 = -2147483648;
+pub const INT8_MAX: u32 = 127;
+pub const INT16_MAX: u32 = 32767;
+pub const INT32_MAX: u32 = 2147483647;
+pub const UINT8_MAX: u32 = 255;
+pub const UINT16_MAX: u32 = 65535;
+pub const UINT32_MAX: u32 = 4294967295;
+pub const INT_LEAST8_MIN: i32 = -128;
+pub const INT_LEAST16_MIN: i32 = -32768;
+pub const INT_LEAST32_MIN: i32 = -2147483648;
+pub const INT_LEAST8_MAX: u32 = 127;
+pub const INT_LEAST16_MAX: u32 = 32767;
+pub const INT_LEAST32_MAX: u32 = 2147483647;
+pub const UINT_LEAST8_MAX: u32 = 255;
+pub const UINT_LEAST16_MAX: u32 = 65535;
+pub const UINT_LEAST32_MAX: u32 = 4294967295;
+pub const INT_FAST8_MIN: i32 = -128;
+pub const INT_FAST16_MIN: i64 = -9223372036854775808;
+pub const INT_FAST32_MIN: i64 = -9223372036854775808;
+pub const INT_FAST8_MAX: u32 = 127;
+pub const INT_FAST16_MAX: u64 = 9223372036854775807;
+pub const INT_FAST32_MAX: u64 = 9223372036854775807;
+pub const UINT_FAST8_MAX: u32 = 255;
+pub const UINT_FAST16_MAX: i32 = -1;
+pub const UINT_FAST32_MAX: i32 = -1;
+pub const INTPTR_MIN: i64 = -9223372036854775808;
+pub const INTPTR_MAX: u64 = 9223372036854775807;
+pub const UINTPTR_MAX: i32 = -1;
+pub const PTRDIFF_MIN: i64 = -9223372036854775808;
+pub const PTRDIFF_MAX: u64 = 9223372036854775807;
+pub const SIG_ATOMIC_MIN: i32 = -2147483648;
+pub const SIG_ATOMIC_MAX: u32 = 2147483647;
+pub const SIZE_MAX: i32 = -1;
+pub const WINT_MIN: u32 = 0;
+pub const WINT_MAX: u32 = 4294967295;
+pub type size_t = ::std::os::raw::c_ulong;
+pub type wchar_t = ::std::os::raw::c_int;
+#[repr(C)]
+#[repr(align(16))]
+#[derive(Debug, Copy, Clone)]
+pub struct max_align_t {
+ pub __clang_max_align_nonce1: ::std::os::raw::c_longlong,
+ pub __bindgen_padding_0: u64,
+ pub __clang_max_align_nonce2: u128,
+}
+#[test]
+fn bindgen_test_layout_max_align_t() {
+ assert_eq!(
+ ::std::mem::size_of::<max_align_t>(),
+ 32usize,
+ concat!("Size of: ", stringify!(max_align_t))
+ );
+ assert_eq!(
+ ::std::mem::align_of::<max_align_t>(),
+ 16usize,
+ concat!("Alignment of ", stringify!(max_align_t))
+ );
+ assert_eq!(
+ unsafe {
+ &(*(::std::ptr::null::<max_align_t>())).__clang_max_align_nonce1 as *const _ as usize
+ },
+ 0usize,
+ concat!(
+ "Offset of field: ",
+ stringify!(max_align_t),
+ "::",
+ stringify!(__clang_max_align_nonce1)
+ )
+ );
+ assert_eq!(
+ unsafe {
+ &(*(::std::ptr::null::<max_align_t>())).__clang_max_align_nonce2 as *const _ as usize
+ },
+ 16usize,
+ concat!(
+ "Offset of field: ",
+ stringify!(max_align_t),
+ "::",
+ stringify!(__clang_max_align_nonce2)
+ )
+ );
+}
+pub type __u_char = ::std::os::raw::c_uchar;
+pub type __u_short = ::std::os::raw::c_ushort;
+pub type __u_int = ::std::os::raw::c_uint;
+pub type __u_long = ::std::os::raw::c_ulong;
+pub type __int8_t = ::std::os::raw::c_schar;
+pub type __uint8_t = ::std::os::raw::c_uchar;
+pub type __int16_t = ::std::os::raw::c_short;
+pub type __uint16_t = ::std::os::raw::c_ushort;
+pub type __int32_t = ::std::os::raw::c_int;
+pub type __uint32_t = ::std::os::raw::c_uint;
+pub type __int64_t = ::std::os::raw::c_long;
+pub type __uint64_t = ::std::os::raw::c_ulong;
+pub type __int_least8_t = __int8_t;
+pub type __uint_least8_t = __uint8_t;
+pub type __int_least16_t = __int16_t;
+pub type __uint_least16_t = __uint16_t;
+pub type __int_least32_t = __int32_t;
+pub type __uint_least32_t = __uint32_t;
+pub type __int_least64_t = __int64_t;
+pub type __uint_least64_t = __uint64_t;
+pub type __quad_t = ::std::os::raw::c_long;
+pub type __u_quad_t = ::std::os::raw::c_ulong;
+pub type __intmax_t = ::std::os::raw::c_long;
+pub type __uintmax_t = ::std::os::raw::c_ulong;
+pub type __dev_t = ::std::os::raw::c_ulong;
+pub type __uid_t = ::std::os::raw::c_uint;
+pub type __gid_t = ::std::os::raw::c_uint;
+pub type __ino_t = ::std::os::raw::c_ulong;
+pub type __ino64_t = ::std::os::raw::c_ulong;
+pub type __mode_t = ::std::os::raw::c_uint;
+pub type __nlink_t = ::std::os::raw::c_ulong;
+pub type __off_t = ::std::os::raw::c_long;
+pub type __off64_t = ::std::os::raw::c_long;
+pub type __pid_t = ::std::os::raw::c_int;
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct __fsid_t {
+ pub __val: [::std::os::raw::c_int; 2usize],
+}
+#[test]
+fn bindgen_test_layout___fsid_t() {
+ assert_eq!(
+ ::std::mem::size_of::<__fsid_t>(),
+ 8usize,
+ concat!("Size of: ", stringify!(__fsid_t))
+ );
+ assert_eq!(
+ ::std::mem::align_of::<__fsid_t>(),
+ 4usize,
+ concat!("Alignment of ", stringify!(__fsid_t))
+ );
+ assert_eq!(
+ unsafe { &(*(::std::ptr::null::<__fsid_t>())).__val as *const _ as usize },
+ 0usize,
+ concat!(
+ "Offset of field: ",
+ stringify!(__fsid_t),
+ "::",
+ stringify!(__val)
+ )
+ );
+}
+pub type __clock_t = ::std::os::raw::c_long;
+pub type __rlim_t = ::std::os::raw::c_ulong;
+pub type __rlim64_t = ::std::os::raw::c_ulong;
+pub type __id_t = ::std::os::raw::c_uint;
+pub type __time_t = ::std::os::raw::c_long;
+pub type __useconds_t = ::std::os::raw::c_uint;
+pub type __suseconds_t = ::std::os::raw::c_long;
+pub type __daddr_t = ::std::os::raw::c_int;
+pub type __key_t = ::std::os::raw::c_int;
+pub type __clockid_t = ::std::os::raw::c_int;
+pub type __timer_t = *mut ::std::os::raw::c_void;
+pub type __blksize_t = ::std::os::raw::c_long;
+pub type __blkcnt_t = ::std::os::raw::c_long;
+pub type __blkcnt64_t = ::std::os::raw::c_long;
+pub type __fsblkcnt_t = ::std::os::raw::c_ulong;
+pub type __fsblkcnt64_t = ::std::os::raw::c_ulong;
+pub type __fsfilcnt_t = ::std::os::raw::c_ulong;
+pub type __fsfilcnt64_t = ::std::os::raw::c_ulong;
+pub type __fsword_t = ::std::os::raw::c_long;
+pub type __ssize_t = ::std::os::raw::c_long;
+pub type __syscall_slong_t = ::std::os::raw::c_long;
+pub type __syscall_ulong_t = ::std::os::raw::c_ulong;
+pub type __loff_t = __off64_t;
+pub type __caddr_t = *mut ::std::os::raw::c_char;
+pub type __intptr_t = ::std::os::raw::c_long;
+pub type __socklen_t = ::std::os::raw::c_uint;
+pub type __sig_atomic_t = ::std::os::raw::c_int;
+pub type int_least8_t = __int_least8_t;
+pub type int_least16_t = __int_least16_t;
+pub type int_least32_t = __int_least32_t;
+pub type int_least64_t = __int_least64_t;
+pub type uint_least8_t = __uint_least8_t;
+pub type uint_least16_t = __uint_least16_t;
+pub type uint_least32_t = __uint_least32_t;
+pub type uint_least64_t = __uint_least64_t;
+pub type int_fast8_t = ::std::os::raw::c_schar;
+pub type int_fast16_t = ::std::os::raw::c_long;
+pub type int_fast32_t = ::std::os::raw::c_long;
+pub type int_fast64_t = ::std::os::raw::c_long;
+pub type uint_fast8_t = ::std::os::raw::c_uchar;
+pub type uint_fast16_t = ::std::os::raw::c_ulong;
+pub type uint_fast32_t = ::std::os::raw::c_ulong;
+pub type uint_fast64_t = ::std::os::raw::c_ulong;
+pub type intmax_t = __intmax_t;
+pub type uintmax_t = __uintmax_t;
+#[doc = " @mainpage libgpiod public API"]
+#[doc = ""]
+#[doc = " This is the complete documentation of the public API made available to"]
+#[doc = " users of libgpiod."]
+#[doc = ""]
+#[doc = " <p>The API is logically split into several parts such as: GPIO chip & line"]
+#[doc = " operators, GPIO events handling etc."]
+#[doc = ""]
+#[doc = " <p>General note on error handling: all functions exported by libgpiod that"]
+#[doc = " can fail, set errno to one of the error values defined in errno.h upon"]
+#[doc = " failure. The way of notifying the caller that an error occurred varies"]
+#[doc = " between functions, but in general a function that returns an int, returns -1"]
+#[doc = " on error, while a function returning a pointer indicates an error condition"]
+#[doc = " by returning a NULL pointer. It's not practical to list all possible error"]
+#[doc = " codes for every function as they propagate errors from the underlying libc"]
+#[doc = " functions."]
+#[doc = ""]
+#[doc = " <p>In general libgpiod functions are not NULL-aware and it's expected that"]
+#[doc = " users pass valid pointers to objects as arguments. An exception to this rule"]
+#[doc = " are the functions that free/close/release resources - which work when passed"]
+#[doc = " a NULL-pointer as argument. Other exceptions are documented."]
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_chip {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_chip_info {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_line_info {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_line_config {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_request_config {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_line_request {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_info_event {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_edge_event {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiod_edge_event_buffer {
+ _unused: [u8; 0],
+}
+extern "C" {
+ #[doc = " @brief Open a chip by path."]
+ #[doc = " @param path Path to the gpiochip device file."]
+ #[doc = " @return GPIO chip request or NULL if an error occurred."]
+ pub fn gpiod_chip_open(path: *const ::std::os::raw::c_char) -> *mut gpiod_chip;
+}
+extern "C" {
+ #[doc = " @brief Close the chip and release all associated resources."]
+ #[doc = " @param chip Chip to close."]
+ pub fn gpiod_chip_close(chip: *mut gpiod_chip);
+}
+extern "C" {
+ #[doc = " @brief Get information about the chip."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @return New GPIO chip info object or NULL if an error occurred. The returned"]
+ #[doc = " object must be freed by the caller using ::gpiod_chip_info_free."]
+ pub fn gpiod_chip_get_info(chip: *mut gpiod_chip) -> *mut gpiod_chip_info;
+}
+extern "C" {
+ #[doc = " @brief Get the path used to open the chip."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @return Path to the file passed as argument to ::gpiod_chip_open."]
+ pub fn gpiod_chip_get_path(chip: *mut gpiod_chip) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ #[doc = " @brief Get a snapshot of information about a line."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @param offset The offset of the GPIO line."]
+ #[doc = " @return New GPIO line info object or NULL if an error occurred. The returned"]
+ #[doc = "\t object must be freed by the caller using ::gpiod_line_info_free."]
+ pub fn gpiod_chip_get_line_info(
+ chip: *mut gpiod_chip,
+ offset: ::std::os::raw::c_uint,
+ ) -> *mut gpiod_line_info;
+}
+extern "C" {
+ #[doc = " @brief Get a snapshot of the status of a line and start watching it for"]
+ #[doc = "\t future changes."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @param offset The offset of the GPIO line."]
+ #[doc = " @return New GPIO line info object or NULL if an error occurred. The returned"]
+ #[doc = "\t object must be freed by the caller using ::gpiod_line_info_free."]
+ #[doc = " @note Line status does not include the line value. To monitor the line"]
+ #[doc = "\t value the line must be requested as an input with edge detection set."]
+ pub fn gpiod_chip_watch_line_info(
+ chip: *mut gpiod_chip,
+ offset: ::std::os::raw::c_uint,
+ ) -> *mut gpiod_line_info;
+}
+extern "C" {
+ #[doc = " @brief Stop watching a line for status changes."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @param offset The offset of the line to stop watching."]
+ #[doc = " @return 0 on success, -1 on failure."]
+ pub fn gpiod_chip_unwatch_line_info(
+ chip: *mut gpiod_chip,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the file descriptor associated with the chip."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @return File descriptor number for the chip."]
+ #[doc = "\t This function never fails."]
+ #[doc = "\t The returned file descriptor must not be closed by the caller."]
+ #[doc = "\t Call ::gpiod_chip_close to close the file descriptor."]
+ pub fn gpiod_chip_get_fd(chip: *mut gpiod_chip) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Wait for line status change events on any of the watched lines"]
+ #[doc = "\t on the chip."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @param timeout_ns Wait time limit in nanoseconds. If set to 0, the function"]
+ #[doc = "\t\t returns immediatelly. If set to a negative number, the"]
+ #[doc = "\t\t function blocks indefinitely until an event becomes"]
+ #[doc = "\t\t available."]
+ #[doc = " @return 0 if wait timed out, -1 if an error occurred, 1 if an event is"]
+ #[doc = "\t pending."]
+ pub fn gpiod_chip_wait_info_event(
+ chip: *mut gpiod_chip,
+ timeout_ns: i64,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Read a single line status change event from the chip."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @return Newly read watch event object or NULL on error. The event must be"]
+ #[doc = "\t freed by the caller using ::gpiod_info_event_free."]
+ #[doc = " @note If no events are pending, this function will block."]
+ pub fn gpiod_chip_read_info_event(chip: *mut gpiod_chip) -> *mut gpiod_info_event;
+}
+extern "C" {
+ #[doc = " @brief Map a line's name to its offset within the chip."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @param name Name of the GPIO line to map."]
+ #[doc = " @return Offset of the line within the chip or -1 on error."]
+ #[doc = " @note If a line with given name is not exposed by the chip, the function"]
+ #[doc = " sets errno to ENOENT."]
+ pub fn gpiod_chip_get_line_offset_from_name(
+ chip: *mut gpiod_chip,
+ name: *const ::std::os::raw::c_char,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Request a set of lines for exclusive usage."]
+ #[doc = " @param chip GPIO chip object."]
+ #[doc = " @param req_cfg Request config object."]
+ #[doc = " @param line_cfg Line config object."]
+ #[doc = " @return New line request object or NULL if an error occurred. The request"]
+ #[doc = "\t must be released by the caller using ::gpiod_line_request_release."]
+ #[doc = " @note Line configuration overrides for lines that are not requested are"]
+ #[doc = "\t silently ignored."]
+ pub fn gpiod_chip_request_lines(
+ chip: *mut gpiod_chip,
+ req_cfg: *mut gpiod_request_config,
+ line_cfg: *mut gpiod_line_config,
+ ) -> *mut gpiod_line_request;
+}
+extern "C" {
+ #[doc = " @brief Free a chip info object and release all associated resources."]
+ #[doc = " @param info GPIO chip info object to free."]
+ pub fn gpiod_chip_info_free(info: *mut gpiod_chip_info);
+}
+extern "C" {
+ #[doc = " @brief Get the name of the chip as represented in the kernel."]
+ #[doc = " @param info GPIO chip info object."]
+ #[doc = " @return Pointer to a human-readable string containing the chip name."]
+ pub fn gpiod_chip_info_get_name(info: *mut gpiod_chip_info) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ #[doc = " @brief Get the label of the chip as represented in the kernel."]
+ #[doc = " @param info GPIO chip info object."]
+ #[doc = " @return Pointer to a human-readable string containing the chip label."]
+ pub fn gpiod_chip_info_get_label(info: *mut gpiod_chip_info) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ #[doc = " @brief Get the number of lines exposed by the chip."]
+ #[doc = " @param info GPIO chip info object."]
+ #[doc = " @return Number of GPIO lines."]
+ pub fn gpiod_chip_info_get_num_lines(info: *mut gpiod_chip_info) -> size_t;
+}
+pub const GPIOD_LINE_VALUE_INACTIVE: ::std::os::raw::c_uint = 0;
+pub const GPIOD_LINE_VALUE_ACTIVE: ::std::os::raw::c_uint = 1;
+#[doc = " @brief Logical line state."]
+pub type _bindgen_ty_1 = ::std::os::raw::c_uint;
+pub const GPIOD_LINE_DIRECTION_AS_IS: ::std::os::raw::c_uint = 1;
+pub const GPIOD_LINE_DIRECTION_INPUT: ::std::os::raw::c_uint = 2;
+pub const GPIOD_LINE_DIRECTION_OUTPUT: ::std::os::raw::c_uint = 3;
+#[doc = " @brief Direction settings."]
+pub type _bindgen_ty_2 = ::std::os::raw::c_uint;
+pub const GPIOD_LINE_EDGE_NONE: ::std::os::raw::c_uint = 1;
+pub const GPIOD_LINE_EDGE_RISING: ::std::os::raw::c_uint = 2;
+pub const GPIOD_LINE_EDGE_FALLING: ::std::os::raw::c_uint = 3;
+pub const GPIOD_LINE_EDGE_BOTH: ::std::os::raw::c_uint = 4;
+#[doc = " @brief Edge detection settings."]
+pub type _bindgen_ty_3 = ::std::os::raw::c_uint;
+pub const GPIOD_LINE_BIAS_AS_IS: ::std::os::raw::c_uint = 1;
+pub const GPIOD_LINE_BIAS_UNKNOWN: ::std::os::raw::c_uint = 2;
+pub const GPIOD_LINE_BIAS_DISABLED: ::std::os::raw::c_uint = 3;
+pub const GPIOD_LINE_BIAS_PULL_UP: ::std::os::raw::c_uint = 4;
+pub const GPIOD_LINE_BIAS_PULL_DOWN: ::std::os::raw::c_uint = 5;
+#[doc = " @brief Internal bias settings."]
+pub type _bindgen_ty_4 = ::std::os::raw::c_uint;
+pub const GPIOD_LINE_DRIVE_PUSH_PULL: ::std::os::raw::c_uint = 1;
+pub const GPIOD_LINE_DRIVE_OPEN_DRAIN: ::std::os::raw::c_uint = 2;
+pub const GPIOD_LINE_DRIVE_OPEN_SOURCE: ::std::os::raw::c_uint = 3;
+#[doc = " @brief Drive settings."]
+pub type _bindgen_ty_5 = ::std::os::raw::c_uint;
+pub const GPIOD_LINE_EVENT_CLOCK_MONOTONIC: ::std::os::raw::c_uint = 1;
+pub const GPIOD_LINE_EVENT_CLOCK_REALTIME: ::std::os::raw::c_uint = 2;
+#[doc = " @brief Event clock settings."]
+pub type _bindgen_ty_6 = ::std::os::raw::c_uint;
+extern "C" {
+ #[doc = " @brief Free a line info object and release all associated resources."]
+ #[doc = " @param info GPIO line info object to free."]
+ pub fn gpiod_line_info_free(info: *mut gpiod_line_info);
+}
+extern "C" {
+ #[doc = " @brief Copy a line info object."]
+ #[doc = " @param info Line info to copy."]
+ #[doc = " @return Copy of the line info or NULL on error. The returned object must"]
+ #[doc = "\t be freed by the caller using :gpiod_line_info_free."]
+ pub fn gpiod_line_info_copy(info: *mut gpiod_line_info) -> *mut gpiod_line_info;
+}
+extern "C" {
+ #[doc = " @brief Get the offset of the line."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return Offset of the line within the parent chip."]
+ #[doc = ""]
+ #[doc = " The offset uniquely identifies the line on the chip."]
+ #[doc = " The combination of the chip and offset uniquely identifies the line within"]
+ #[doc = " the system."]
+ pub fn gpiod_line_info_get_offset(info: *mut gpiod_line_info) -> ::std::os::raw::c_uint;
+}
+extern "C" {
+ #[doc = " @brief Get the name of the line."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return Name of the GPIO line as it is represented in the kernel."]
+ #[doc = "\t This function returns a pointer to a null-terminated string"]
+ #[doc = "\t or NULL if the line is unnamed."]
+ pub fn gpiod_line_info_get_name(info: *mut gpiod_line_info) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ #[doc = " @brief Check if the line is in use."]
+ #[doc = " @param info GPIO line object."]
+ #[doc = " @return True if the line is in use, false otherwise."]
+ #[doc = ""]
+ #[doc = " The exact reason a line is busy cannot be determined from user space."]
+ #[doc = " It may have been requested by another process or hogged by the kernel."]
+ #[doc = " It only matters that the line is used and can't be requested until"]
+ #[doc = " released by the existing consumer."]
+ pub fn gpiod_line_info_is_used(info: *mut gpiod_line_info) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the name of the consumer of the line."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return Name of the GPIO consumer as it is represented in the kernel."]
+ #[doc = "\t This function returns a pointer to a null-terminated string"]
+ #[doc = "\t or NULL if the consumer name is not set."]
+ pub fn gpiod_line_info_get_consumer(
+ info: *mut gpiod_line_info,
+ ) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ #[doc = " @brief Get the direction setting of the line."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return Returns ::GPIOD_LINE_DIRECTION_INPUT or"]
+ #[doc = "\t ::GPIOD_LINE_DIRECTION_OUTPUT."]
+ pub fn gpiod_line_info_get_direction(info: *mut gpiod_line_info) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the edge detection setting of the line."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return Returns ::GPIOD_LINE_EDGE_NONE, ::GPIOD_LINE_EDGE_RISING,"]
+ #[doc = "\t ::GPIOD_LINE_EDGE_FALLING or ::GPIOD_LINE_EDGE_BOTH."]
+ pub fn gpiod_line_info_get_edge_detection(info: *mut gpiod_line_info) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the bias setting of the line."]
+ #[doc = " @param info GPIO line object."]
+ #[doc = " @return Returns ::GPIOD_LINE_BIAS_PULL_UP, ::GPIOD_LINE_BIAS_PULL_DOWN,"]
+ #[doc = "\t ::GPIOD_LINE_BIAS_DISABLED or ::GPIOD_LINE_BIAS_UNKNOWN."]
+ pub fn gpiod_line_info_get_bias(info: *mut gpiod_line_info) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the drive setting of the line."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return Returns ::GPIOD_LINE_DRIVE_PUSH_PULL, ::GPIOD_LINE_DRIVE_OPEN_DRAIN"]
+ #[doc = "\t or ::GPIOD_LINE_DRIVE_OPEN_SOURCE."]
+ pub fn gpiod_line_info_get_drive(info: *mut gpiod_line_info) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Check if the logical value of the line is inverted compared to the"]
+ #[doc = "\t physical."]
+ #[doc = " @param info GPIO line object."]
+ #[doc = " @return True if the line is \"active-low\", false otherwise."]
+ pub fn gpiod_line_info_is_active_low(info: *mut gpiod_line_info) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Check if the line is debounced (either by hardware or by the kernel"]
+ #[doc = "\t software debouncer)."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return True if the line is debounced, false otherwise."]
+ pub fn gpiod_line_info_is_debounced(info: *mut gpiod_line_info) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the debounce period of the line, in microseconds."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return Debounce period in microseconds."]
+ #[doc = "\t 0 if the line is not debounced."]
+ pub fn gpiod_line_info_get_debounce_period_us(
+ info: *mut gpiod_line_info,
+ ) -> ::std::os::raw::c_ulong;
+}
+extern "C" {
+ #[doc = " @brief Get the event clock setting used for edge event timestamps for the"]
+ #[doc = "\t line."]
+ #[doc = " @param info GPIO line info object."]
+ #[doc = " @return Returns ::GPIOD_LINE_EVENT_CLOCK_MONOTONIC or"]
+ #[doc = "\t ::GPIOD_LINE_EVENT_CLOCK_REALTIME."]
+ pub fn gpiod_line_info_get_event_clock(info: *mut gpiod_line_info) -> ::std::os::raw::c_int;
+}
+pub const GPIOD_INFO_EVENT_LINE_REQUESTED: ::std::os::raw::c_uint = 1;
+pub const GPIOD_INFO_EVENT_LINE_RELEASED: ::std::os::raw::c_uint = 2;
+pub const GPIOD_INFO_EVENT_LINE_CONFIG_CHANGED: ::std::os::raw::c_uint = 3;
+#[doc = " @brief Line status change event types."]
+pub type _bindgen_ty_7 = ::std::os::raw::c_uint;
+extern "C" {
+ #[doc = " @brief Free the info event object and release all associated resources."]
+ #[doc = " @param event Info event to free."]
+ pub fn gpiod_info_event_free(event: *mut gpiod_info_event);
+}
+extern "C" {
+ #[doc = " @brief Get the event type of the status change event."]
+ #[doc = " @param event Line status watch event."]
+ #[doc = " @return One of ::GPIOD_INFO_EVENT_LINE_REQUESTED,"]
+ #[doc = "\t ::GPIOD_INFO_EVENT_LINE_RELEASED or"]
+ #[doc = "\t ::GPIOD_INFO_EVENT_LINE_CONFIG_CHANGED."]
+ pub fn gpiod_info_event_get_event_type(event: *mut gpiod_info_event) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the timestamp of the event."]
+ #[doc = " @param event Line status watch event."]
+ #[doc = " @return Timestamp in nanoseconds, read from the monotonic clock."]
+ pub fn gpiod_info_event_get_timestamp_ns(event: *mut gpiod_info_event) -> u64;
+}
+extern "C" {
+ #[doc = " @brief Get the snapshot of line-info associated with the event."]
+ #[doc = " @param event Line info event object."]
+ #[doc = " @return Returns a pointer to the line-info object associated with the event"]
+ #[doc = "\t whose lifetime is tied to the event object. It must not be freed by"]
+ #[doc = "\t the caller."]
+ pub fn gpiod_info_event_get_line_info(event: *mut gpiod_info_event) -> *mut gpiod_line_info;
+}
+extern "C" {
+ #[doc = " @brief Create a new line config object."]
+ #[doc = " @return New line config object or NULL on error."]
+ pub fn gpiod_line_config_new() -> *mut gpiod_line_config;
+}
+extern "C" {
+ #[doc = " @brief Free the line config object and release all associated resources."]
+ #[doc = " @param config Line config object to free."]
+ pub fn gpiod_line_config_free(config: *mut gpiod_line_config);
+}
+extern "C" {
+ #[doc = " @brief Reset the line config object."]
+ #[doc = " @param config Line config object to free."]
+ #[doc = ""]
+ #[doc = " Resets the entire configuration stored in the object. This is useful if"]
+ #[doc = " the user wants to reuse the object without reallocating it."]
+ pub fn gpiod_line_config_reset(config: *mut gpiod_line_config);
+}
+extern "C" {
+ #[doc = " @brief Set the default line direction."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param direction New direction."]
+ pub fn gpiod_line_config_set_direction_default(
+ config: *mut gpiod_line_config,
+ direction: ::std::os::raw::c_int,
+ );
+}
+extern "C" {
+ #[doc = " @brief Set the direction override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param direction New direction."]
+ #[doc = " @param offset The offset of the line for which to set the override."]
+ pub fn gpiod_line_config_set_direction_override(
+ config: *mut gpiod_line_config,
+ direction: ::std::os::raw::c_int,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Clear the direction override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to clear the override."]
+ #[doc = " @note Does nothing if no override is set for the line."]
+ pub fn gpiod_line_config_clear_direction_override(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Check if the direction is overridden for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line to check for the override."]
+ #[doc = " @return True if direction is overridden on the line, false otherwise."]
+ pub fn gpiod_line_config_direction_is_overridden(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the default direction setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Direction setting used for any non-overridden line."]
+ pub fn gpiod_line_config_get_direction_default(
+ config: *mut gpiod_line_config,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the direction setting for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to read the direction."]
+ #[doc = " @return Direction setting for the line if the config object were used"]
+ #[doc = "\t in a request."]
+ pub fn gpiod_line_config_get_direction_offset(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Set the default edge event detection."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param edge Type of edge events to detect."]
+ pub fn gpiod_line_config_set_edge_detection_default(
+ config: *mut gpiod_line_config,
+ edge: ::std::os::raw::c_int,
+ );
+}
+extern "C" {
+ #[doc = " @brief Set the edge detection override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param edge Type of edge events to detect."]
+ #[doc = " @param offset The offset of the line for which to set the override."]
+ pub fn gpiod_line_config_set_edge_detection_override(
+ config: *mut gpiod_line_config,
+ edge: ::std::os::raw::c_int,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Clear the edge detection override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to clear the override."]
+ #[doc = " @note Does nothing if no override is set for the line."]
+ pub fn gpiod_line_config_clear_edge_detection_override(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Check if the edge detection setting is overridden for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line to check for the override."]
+ #[doc = " @return True if edge detection is overridden for the line, false otherwise."]
+ pub fn gpiod_line_config_edge_detection_is_overridden(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the default edge detection setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Edge detection setting used for any non-overridden line."]
+ pub fn gpiod_line_config_get_edge_detection_default(
+ config: *mut gpiod_line_config,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the edge event detection setting for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to read the edge event detection"]
+ #[doc = "\t\t setting."]
+ #[doc = " @return Edge event detection setting for the line if the config object"]
+ #[doc = "\t were used in a request."]
+ pub fn gpiod_line_config_get_edge_detection_offset(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Set the default bias setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param bias New bias."]
+ pub fn gpiod_line_config_set_bias_default(
+ config: *mut gpiod_line_config,
+ bias: ::std::os::raw::c_int,
+ );
+}
+extern "C" {
+ #[doc = " @brief Set the bias override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param bias New bias setting."]
+ #[doc = " @param offset The offset of the line for which to set the override."]
+ pub fn gpiod_line_config_set_bias_override(
+ config: *mut gpiod_line_config,
+ bias: ::std::os::raw::c_int,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Clear the bias override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to clear the override."]
+ #[doc = " @note Does nothing if no override is set for the line."]
+ pub fn gpiod_line_config_clear_bias_override(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Check if the bias setting is overridden for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line to check for the override."]
+ #[doc = " @return True if bias is overridden for the line, false otherwise."]
+ pub fn gpiod_line_config_bias_is_overridden(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the default bias setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Bias setting used for any non-overridden line."]
+ pub fn gpiod_line_config_get_bias_default(
+ config: *mut gpiod_line_config,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the bias setting for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to read the bias setting."]
+ #[doc = " @return Bias setting used for the line if the config object were used"]
+ #[doc = "\t in a request."]
+ pub fn gpiod_line_config_get_bias_offset(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Set the default drive setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param drive New drive."]
+ pub fn gpiod_line_config_set_drive_default(
+ config: *mut gpiod_line_config,
+ drive: ::std::os::raw::c_int,
+ );
+}
+extern "C" {
+ #[doc = " @brief Set the drive override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param drive New drive setting."]
+ #[doc = " @param offset The offset of the line for which to set the override."]
+ pub fn gpiod_line_config_set_drive_override(
+ config: *mut gpiod_line_config,
+ drive: ::std::os::raw::c_int,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Clear the drive override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to clear the override."]
+ #[doc = " @note Does nothing if no override is set for the line."]
+ pub fn gpiod_line_config_clear_drive_override(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Check if the drive setting is overridden for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line to check for the override."]
+ #[doc = " @return True if drive is overridden for the line, false otherwise."]
+ pub fn gpiod_line_config_drive_is_overridden(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the default drive setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Drive setting for any non-overridden line."]
+ pub fn gpiod_line_config_get_drive_default(
+ config: *mut gpiod_line_config,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the drive setting for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to read the drive setting."]
+ #[doc = " @return Drive setting for the line if the config object were used in a"]
+ #[doc = "\t request."]
+ pub fn gpiod_line_config_get_drive_offset(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Set the default active-low setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param active_low New active-low setting."]
+ pub fn gpiod_line_config_set_active_low_default(
+ config: *mut gpiod_line_config,
+ active_low: bool,
+ );
+}
+extern "C" {
+ #[doc = " @brief Override the active-low setting for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param active_low New active-low setting."]
+ #[doc = " @param offset The offset of the line for which to set the override."]
+ pub fn gpiod_line_config_set_active_low_override(
+ config: *mut gpiod_line_config,
+ active_low: bool,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Clear the active-low override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to clear the override."]
+ #[doc = " @note Does nothing if no override is set for the line."]
+ pub fn gpiod_line_config_clear_active_low_override(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Check if the active-low setting is overridden for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line to check for the override."]
+ #[doc = " @return True if active-low is overridden for the line, false otherwise."]
+ pub fn gpiod_line_config_active_low_is_overridden(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Check if active-low is the default setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Active-low setting for any non-overridden line."]
+ pub fn gpiod_line_config_get_active_low_default(config: *mut gpiod_line_config) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Check if a line is configured as active-low."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to read the active-low setting."]
+ #[doc = " @return Active-low setting for the line if the config object were used in"]
+ #[doc = "\t a request."]
+ pub fn gpiod_line_config_get_active_low_offset(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Set the default debounce period."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param period New debounce period in microseconds. Disables debouncing if 0."]
+ #[doc = " @note Debouncing is only useful on input lines with edge detection."]
+ #[doc = "\t Its purpose is to filter spurious events due to noise during the"]
+ #[doc = "\t edge transition. It has no effect on normal get or set operations."]
+ pub fn gpiod_line_config_set_debounce_period_us_default(
+ config: *mut gpiod_line_config,
+ period: ::std::os::raw::c_ulong,
+ );
+}
+extern "C" {
+ #[doc = " @brief Override the debounce period setting for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param period New debounce period in microseconds."]
+ #[doc = " @param offset The offset of the line for which to set the override."]
+ pub fn gpiod_line_config_set_debounce_period_us_override(
+ config: *mut gpiod_line_config,
+ period: ::std::os::raw::c_ulong,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Clear the debounce period override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to clear the override."]
+ #[doc = " @note Does nothing if no override is set for the line."]
+ pub fn gpiod_line_config_clear_debounce_period_us_override(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Check if the debounce period setting is overridden for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line to check for the override."]
+ #[doc = " @return True if debounce period is overridden for the line, false"]
+ #[doc = "\t otherwise."]
+ pub fn gpiod_line_config_debounce_period_us_is_overridden(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the default debounce period."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Debounce period for any non-overridden line."]
+ #[doc = "\t Measured in microseconds."]
+ #[doc = "\t 0 if debouncing is disabled."]
+ pub fn gpiod_line_config_get_debounce_period_us_default(
+ config: *mut gpiod_line_config,
+ ) -> ::std::os::raw::c_ulong;
+}
+extern "C" {
+ #[doc = " @brief Get the debounce period for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to read the debounce period."]
+ #[doc = " @return Debounce period for the line if the config object were used in a"]
+ #[doc = "\t request."]
+ #[doc = "\t Measured in microseconds."]
+ #[doc = "\t 0 if debouncing is disabled."]
+ pub fn gpiod_line_config_get_debounce_period_us_offset(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_ulong;
+}
+extern "C" {
+ #[doc = " @brief Set the default event timestamp clock."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param clock New clock to use."]
+ pub fn gpiod_line_config_set_event_clock_default(
+ config: *mut gpiod_line_config,
+ clock: ::std::os::raw::c_int,
+ );
+}
+extern "C" {
+ #[doc = " @brief Override the event clock setting for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param clock New event clock to use."]
+ #[doc = " @param offset The offset of the line for which to set the override."]
+ pub fn gpiod_line_config_set_event_clock_override(
+ config: *mut gpiod_line_config,
+ clock: ::std::os::raw::c_int,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Clear the event clock override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to clear the override."]
+ #[doc = " @note Does nothing if no override is set for the line."]
+ pub fn gpiod_line_config_clear_event_clock_override(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Check if the event clock setting is overridden for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line to check for the override."]
+ #[doc = " @return True if event clock period is overridden for the line, false"]
+ #[doc = "\t otherwise."]
+ pub fn gpiod_line_config_event_clock_is_overridden(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the default event clock setting."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Event clock setting for any non-overridden line."]
+ pub fn gpiod_line_config_get_event_clock_default(
+ config: *mut gpiod_line_config,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the event clock setting for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to read the event clock setting."]
+ #[doc = " @return Event clock setting for the line if the config object were used in a"]
+ #[doc = "\t request."]
+ pub fn gpiod_line_config_get_event_clock_offset(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Set the default output value."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param value New value."]
+ #[doc = ""]
+ #[doc = " The default output value applies to all non-overridden output lines."]
+ #[doc = " It does not apply to input lines or overridden lines."]
+ pub fn gpiod_line_config_set_output_value_default(
+ config: *mut gpiod_line_config,
+ value: ::std::os::raw::c_int,
+ );
+}
+extern "C" {
+ #[doc = " @brief Override the output value for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to override the output value."]
+ #[doc = " @param value Output value to set."]
+ pub fn gpiod_line_config_set_output_value_override(
+ config: *mut gpiod_line_config,
+ value: ::std::os::raw::c_int,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Override the output values for multiple lines."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param num_values Number of lines for which to override values."]
+ #[doc = " @param offsets Array of offsets identifying the lines for which to override"]
+ #[doc = "\t\t values, containing \\p num_values entries."]
+ #[doc = " @param values Array of output values corresponding to the lines identified in"]
+ #[doc = "\t\t \\p offsets, also containing \\p num_values entries."]
+ pub fn gpiod_line_config_set_output_values(
+ config: *mut gpiod_line_config,
+ num_values: size_t,
+ offsets: *const ::std::os::raw::c_uint,
+ values: *const ::std::os::raw::c_int,
+ );
+}
+extern "C" {
+ #[doc = " @brief Clear the output value override for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line for which to clear the override."]
+ #[doc = " @note Does nothing if no override is set for the line."]
+ pub fn gpiod_line_config_clear_output_value_override(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Check if the output value is overridden for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset The offset of the line to check for the override."]
+ #[doc = " @return True if output value is overridden for the line, false otherwise."]
+ pub fn gpiod_line_config_output_value_is_overridden(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the default output value."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Output value for any non-overridden line."]
+ pub fn gpiod_line_config_get_output_value_default(
+ config: *mut gpiod_line_config,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the configured output value for a line."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offset Line offset for which to read the value."]
+ #[doc = " @return Output value for the line if the config object were used in a"]
+ #[doc = "\t request."]
+ pub fn gpiod_line_config_get_output_value_offset(
+ config: *mut gpiod_line_config,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+pub const GPIOD_LINE_CONFIG_PROP_DIRECTION: ::std::os::raw::c_uint = 1;
+pub const GPIOD_LINE_CONFIG_PROP_EDGE_DETECTION: ::std::os::raw::c_uint = 2;
+pub const GPIOD_LINE_CONFIG_PROP_BIAS: ::std::os::raw::c_uint = 3;
+pub const GPIOD_LINE_CONFIG_PROP_DRIVE: ::std::os::raw::c_uint = 4;
+pub const GPIOD_LINE_CONFIG_PROP_ACTIVE_LOW: ::std::os::raw::c_uint = 5;
+pub const GPIOD_LINE_CONFIG_PROP_DEBOUNCE_PERIOD_US: ::std::os::raw::c_uint = 6;
+#[doc = " Debounce period."]
+pub const GPIOD_LINE_CONFIG_PROP_EVENT_CLOCK: ::std::os::raw::c_uint = 7;
+pub const GPIOD_LINE_CONFIG_PROP_OUTPUT_VALUE: ::std::os::raw::c_uint = 8;
+#[doc = " @brief List of properties that can be stored in a line_config object."]
+#[doc = ""]
+#[doc = " Used when retrieving the overrides."]
+pub type _bindgen_ty_8 = ::std::os::raw::c_uint;
+extern "C" {
+ #[doc = " @brief Get the total number of overridden settings stored in the line config"]
+ #[doc = "\t object."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @return Number of individual overridden settings."]
+ pub fn gpiod_line_config_get_num_overrides(config: *mut gpiod_line_config) -> size_t;
+}
+extern "C" {
+ #[doc = " @brief Get the list of overridden offsets and the corresponding types of"]
+ #[doc = "\t overridden settings."]
+ #[doc = " @param config Line config object."]
+ #[doc = " @param offsets Array to store the overidden offsets. Must be sized to hold"]
+ #[doc = "\t\t the number of unsigned integers returned by"]
+ #[doc = "\t\t ::gpiod_line_config_get_num_overrides."]
+ #[doc = " @param props Array to store the types of overridden settings. Must be sized"]
+ #[doc = "\t\tto hold the number of integers returned by"]
+ #[doc = "\t\t::gpiod_line_config_get_num_overrides."]
+ #[doc = ""]
+ #[doc = " The overridden (offset, prop) pairs are stored in the \\p offsets and"]
+ #[doc = " \\p props arrays, with the pairs having the same index."]
+ pub fn gpiod_line_config_get_overrides(
+ config: *mut gpiod_line_config,
+ offsets: *mut ::std::os::raw::c_uint,
+ props: *mut ::std::os::raw::c_int,
+ );
+}
+extern "C" {
+ #[doc = " @brief Create a new request config object."]
+ #[doc = " @return New request config object or NULL on error."]
+ pub fn gpiod_request_config_new() -> *mut gpiod_request_config;
+}
+extern "C" {
+ #[doc = " @brief Free the request config object and release all associated resources."]
+ #[doc = " @param config Line config object."]
+ pub fn gpiod_request_config_free(config: *mut gpiod_request_config);
+}
+extern "C" {
+ #[doc = " @brief Set the consumer name for the request."]
+ #[doc = " @param config Request config object."]
+ #[doc = " @param consumer Consumer name."]
+ #[doc = " @note If the consumer string is too long, it will be truncated to the max"]
+ #[doc = " accepted length."]
+ pub fn gpiod_request_config_set_consumer(
+ config: *mut gpiod_request_config,
+ consumer: *const ::std::os::raw::c_char,
+ );
+}
+extern "C" {
+ #[doc = " @brief Get the consumer name configured in the request config."]
+ #[doc = " @param config Request config object."]
+ #[doc = " @return Consumer name stored in the request config."]
+ pub fn gpiod_request_config_get_consumer(
+ config: *mut gpiod_request_config,
+ ) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ #[doc = " @brief Set the offsets of the lines to be requested."]
+ #[doc = " @param config Request config object."]
+ #[doc = " @param num_offsets Number of offsets to set."]
+ #[doc = " @param offsets Array of offsets, containing \\p num_offsets entries."]
+ #[doc = " @note If too many offsets were specified, the offsets above the limit"]
+ #[doc = " accepted by the kernel (64 lines) are silently dropped."]
+ pub fn gpiod_request_config_set_offsets(
+ config: *mut gpiod_request_config,
+ num_offsets: size_t,
+ offsets: *const ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Get the number of offsets configured in this request config."]
+ #[doc = " @param config Request config object."]
+ #[doc = " @return Number of line offsets in this request config."]
+ pub fn gpiod_request_config_get_num_offsets(config: *mut gpiod_request_config) -> size_t;
+}
+extern "C" {
+ #[doc = " @brief Get the offsets of lines in the request config."]
+ #[doc = " @param config Request config object."]
+ #[doc = " @param offsets Array to store offsets. Must be sized to hold the number of"]
+ #[doc = "\t\t lines returned by ::gpiod_request_config_get_num_offsets."]
+ pub fn gpiod_request_config_get_offsets(
+ config: *mut gpiod_request_config,
+ offsets: *mut ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Set the size of the kernel event buffer for the request."]
+ #[doc = " @param config Request config object."]
+ #[doc = " @param event_buffer_size New event buffer size."]
+ #[doc = " @note The kernel may adjust the value if it's too high. If set to 0, the"]
+ #[doc = " default value will be used."]
+ #[doc = " @note The kernel buffer is distinct from and independent of the user space"]
+ #[doc = "\t buffer (::gpiod_edge_event_buffer_new)."]
+ pub fn gpiod_request_config_set_event_buffer_size(
+ config: *mut gpiod_request_config,
+ event_buffer_size: size_t,
+ );
+}
+extern "C" {
+ #[doc = " @brief Get the edge event buffer size for the request config."]
+ #[doc = " @param config Request config object."]
+ #[doc = " @return Edge event buffer size setting from the request config."]
+ pub fn gpiod_request_config_get_event_buffer_size(config: *mut gpiod_request_config) -> size_t;
+}
+extern "C" {
+ #[doc = " @brief Release the requested lines and free all associated resources."]
+ #[doc = " @param request Line request object to release."]
+ pub fn gpiod_line_request_release(request: *mut gpiod_line_request);
+}
+extern "C" {
+ #[doc = " @brief Get the number of lines in the request."]
+ #[doc = " @param request Line request object."]
+ #[doc = " @return Number of requested lines."]
+ pub fn gpiod_line_request_get_num_lines(request: *mut gpiod_line_request) -> size_t;
+}
+extern "C" {
+ #[doc = " @brief Get the offsets of the lines in the request."]
+ #[doc = " @param request Line request object."]
+ #[doc = " @param offsets Array to store offsets. Must be sized to hold the number of"]
+ #[doc = "\t\t lines returned by ::gpiod_line_request_get_num_lines."]
+ pub fn gpiod_line_request_get_offsets(
+ request: *mut gpiod_line_request,
+ offsets: *mut ::std::os::raw::c_uint,
+ );
+}
+extern "C" {
+ #[doc = " @brief Get the value of a single requested line."]
+ #[doc = " @param request Line request object."]
+ #[doc = " @param offset The offset of the line of which the value should be read."]
+ #[doc = " @return Returns 1 or 0 on success and -1 on error."]
+ pub fn gpiod_line_request_get_value(
+ request: *mut gpiod_line_request,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the values of a subset of requested lines."]
+ #[doc = " @param request GPIO line request."]
+ #[doc = " @param num_values Number of lines for which to read values."]
+ #[doc = " @param offsets Array of offsets identifying the subset of requested lines"]
+ #[doc = "\t\t from which to read values."]
+ #[doc = " @param values Array in which the values will be stored. Must be sized"]
+ #[doc = "\t\t to hold \\p num_values entries. Each value is associated with the"]
+ #[doc = "\t\t line identified by the corresponding entry in \\p offsets."]
+ #[doc = " @return 0 on success, -1 on failure."]
+ pub fn gpiod_line_request_get_values_subset(
+ request: *mut gpiod_line_request,
+ num_values: size_t,
+ offsets: *const ::std::os::raw::c_uint,
+ values: *mut ::std::os::raw::c_int,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the values of all requested lines."]
+ #[doc = " @param request GPIO line request."]
+ #[doc = " @param values Array in which the values will be stored. Must be sized to"]
+ #[doc = "\t\t hold the number of lines returned by"]
+ #[doc = "\t\t ::gpiod_line_request_get_num_lines."]
+ #[doc = "\t\t Each value is associated with the line identified by the"]
+ #[doc = "\t\t corresponding entry in the offset array returned by"]
+ #[doc = "\t\t ::gpiod_line_request_get_offsets."]
+ #[doc = " @return 0 on success, -1 on failure."]
+ pub fn gpiod_line_request_get_values(
+ request: *mut gpiod_line_request,
+ values: *mut ::std::os::raw::c_int,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Set the value of a single requested line."]
+ #[doc = " @param request Line request object."]
+ #[doc = " @param offset The offset of the line for which the value should be set."]
+ #[doc = " @param value Value to set."]
+ pub fn gpiod_line_request_set_value(
+ request: *mut gpiod_line_request,
+ offset: ::std::os::raw::c_uint,
+ value: ::std::os::raw::c_int,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Set the values of a subset of requested lines."]
+ #[doc = " @param request GPIO line request."]
+ #[doc = " @param num_values Number of lines for which to set values."]
+ #[doc = " @param offsets Array of offsets, containing the number of entries specified"]
+ #[doc = "\t\t by \\p num_values, identifying the requested lines for"]
+ #[doc = "\t\t which to set values."]
+ #[doc = " @param values Array of values to set, containing the number of entries"]
+ #[doc = "\t\t specified by \\p num_values. Each value is associated with the"]
+ #[doc = "\t\t line identified by the corresponding entry in \\p offsets."]
+ #[doc = " @return 0 on success, -1 on failure."]
+ pub fn gpiod_line_request_set_values_subset(
+ request: *mut gpiod_line_request,
+ num_values: size_t,
+ offsets: *const ::std::os::raw::c_uint,
+ values: *const ::std::os::raw::c_int,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Set the values of all lines associated with a request."]
+ #[doc = " @param request GPIO line request."]
+ #[doc = " @param values Array containing the values to set. Must be sized to"]
+ #[doc = "\t\t contain the number of lines returned by"]
+ #[doc = "\t\t ::gpiod_line_request_get_num_lines."]
+ #[doc = "\t\t Each value is associated with the line identified by the"]
+ #[doc = "\t\t corresponding entry in the offset array returned by"]
+ #[doc = "\t\t ::gpiod_line_request_get_offsets."]
+ pub fn gpiod_line_request_set_values(
+ request: *mut gpiod_line_request,
+ values: *const ::std::os::raw::c_int,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Update the configuration of lines associated with a line request."]
+ #[doc = " @param request GPIO line request."]
+ #[doc = " @param config New line config to apply."]
+ #[doc = " @return 0 on success, -1 on failure."]
+ #[doc = " @note The new line configuration completely replaces the old."]
+ #[doc = " @note Any requested lines without overrides are configured to the requested"]
+ #[doc = "\t defaults."]
+ #[doc = " @note Any configured overrides for lines that have not been requested"]
+ #[doc = "\t are silently ignored."]
+ pub fn gpiod_line_request_reconfigure_lines(
+ request: *mut gpiod_line_request,
+ config: *mut gpiod_line_config,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the file descriptor associated with a line request."]
+ #[doc = " @param request GPIO line request."]
+ #[doc = " @return The file descriptor associated with the request."]
+ #[doc = "\t This function never fails."]
+ #[doc = "\t The returned file descriptor must not be closed by the caller."]
+ #[doc = "\t Call ::gpiod_line_request_release to close the file."]
+ pub fn gpiod_line_request_get_fd(request: *mut gpiod_line_request) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Wait for edge events on any of the requested lines."]
+ #[doc = " @param request GPIO line request."]
+ #[doc = " @param timeout_ns Wait time limit in nanoseconds. If set to 0, the function"]
+ #[doc = "\t\t returns immediatelly. If set to a negative number, the"]
+ #[doc = "\t\t function blocks indefinitely until an event becomes"]
+ #[doc = "\t\t available."]
+ #[doc = " @return 0 if wait timed out, -1 if an error occurred, 1 if an event is"]
+ #[doc = "\t pending."]
+ #[doc = "q"]
+ #[doc = " Lines must have edge detection set for edge events to be emitted."]
+ #[doc = " By default edge detection is disabled."]
+ pub fn gpiod_line_request_wait_edge_event(
+ request: *mut gpiod_line_request,
+ timeout_ns: i64,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Read a number of edge events from a line request."]
+ #[doc = " @param request GPIO line request."]
+ #[doc = " @param buffer Edge event buffer, sized to hold at least \\p max_events."]
+ #[doc = " @param max_events Maximum number of events to read."]
+ #[doc = " @return On success returns the number of events read from the file"]
+ #[doc = "\t descriptor, on failure return -1."]
+ #[doc = " @note This function will block if no event was queued for the line request."]
+ #[doc = " @note Any exising events in the buffer are overwritten. This is not an"]
+ #[doc = " append operation."]
+ pub fn gpiod_line_request_read_edge_event(
+ request: *mut gpiod_line_request,
+ buffer: *mut gpiod_edge_event_buffer,
+ max_events: size_t,
+ ) -> ::std::os::raw::c_int;
+}
+pub const GPIOD_EDGE_EVENT_RISING_EDGE: ::std::os::raw::c_uint = 1;
+pub const GPIOD_EDGE_EVENT_FALLING_EDGE: ::std::os::raw::c_uint = 2;
+#[doc = " @brief Event types."]
+pub type _bindgen_ty_9 = ::std::os::raw::c_uint;
+extern "C" {
+ #[doc = " @brief Free the edge event object."]
+ #[doc = " @param event Edge event object to free."]
+ pub fn gpiod_edge_event_free(event: *mut gpiod_edge_event);
+}
+extern "C" {
+ #[doc = " @brief Copy the edge event object."]
+ #[doc = " @param event Edge event to copy."]
+ #[doc = " @return Copy of the edge event or NULL on error. The returned object must"]
+ #[doc = "\t be freed by the caller using ::gpiod_edge_event_free."]
+ pub fn gpiod_edge_event_copy(event: *mut gpiod_edge_event) -> *mut gpiod_edge_event;
+}
+extern "C" {
+ #[doc = " @brief Get the event type."]
+ #[doc = " @param event GPIO edge event."]
+ #[doc = " @return The event type (::GPIOD_EDGE_EVENT_RISING_EDGE or"]
+ #[doc = "\t ::GPIOD_EDGE_EVENT_FALLING_EDGE)."]
+ pub fn gpiod_edge_event_get_event_type(event: *mut gpiod_edge_event) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ #[doc = " @brief Get the timestamp of the event."]
+ #[doc = " @param event GPIO edge event."]
+ #[doc = " @return Timestamp in nanoseconds."]
+ #[doc = " @note The source clock for the timestamp depends on the event_clock"]
+ #[doc = "\t setting for the line."]
+ pub fn gpiod_edge_event_get_timestamp_ns(event: *mut gpiod_edge_event) -> u64;
+}
+extern "C" {
+ #[doc = " @brief Get the offset of the line which triggered the event."]
+ #[doc = " @param event GPIO edge event."]
+ #[doc = " @return Line offset."]
+ pub fn gpiod_edge_event_get_line_offset(event: *mut gpiod_edge_event)
+ -> ::std::os::raw::c_uint;
+}
+extern "C" {
+ #[doc = " @brief Get the global sequence number of the event."]
+ #[doc = " @param event GPIO edge event."]
+ #[doc = " @return Sequence number of the event in the series of events for all lines"]
+ #[doc = "\t in the associated line request."]
+ pub fn gpiod_edge_event_get_global_seqno(
+ event: *mut gpiod_edge_event,
+ ) -> ::std::os::raw::c_ulong;
+}
+extern "C" {
+ #[doc = " @brief Get the event sequence number specific to the line."]
+ #[doc = " @param event GPIO edge event."]
+ #[doc = " @return Sequence number of the event in the series of events only for this"]
+ #[doc = "\t line within the lifetime of the associated line request."]
+ pub fn gpiod_edge_event_get_line_seqno(event: *mut gpiod_edge_event)
+ -> ::std::os::raw::c_ulong;
+}
+extern "C" {
+ #[doc = " @brief Create a new edge event buffer."]
+ #[doc = " @param capacity Number of events the buffer can store (min = 1, max = 1024)."]
+ #[doc = " @return New edge event buffer or NULL on error."]
+ #[doc = " @note If capacity equals 0, it will be set to a default value of 64. If"]
+ #[doc = "\t capacity is larger than 1024, it will be limited to 1024."]
+ #[doc = " @note The user space buffer is independent of the kernel buffer"]
+ #[doc = "\t (::gpiod_request_config_set_event_buffer_size). As the user space"]
+ #[doc = "\t buffer is filled from the kernel buffer, there is no benefit making"]
+ #[doc = "\t the user space buffer larger than the kernel buffer."]
+ #[doc = "\t The default kernel buffer size for each request is 16*num_lines."]
+ pub fn gpiod_edge_event_buffer_new(capacity: size_t) -> *mut gpiod_edge_event_buffer;
+}
+extern "C" {
+ #[doc = " @brief Get the capacity (the max number of events that can be stored) of"]
+ #[doc = "\t the event buffer."]
+ #[doc = " @param buffer Edge event buffer."]
+ #[doc = " @return The capacity of the buffer."]
+ pub fn gpiod_edge_event_buffer_get_capacity(buffer: *mut gpiod_edge_event_buffer) -> size_t;
+}
+extern "C" {
+ #[doc = " @brief Free the edge event buffer and release all associated resources."]
+ #[doc = " @param buffer Edge event buffer to free."]
+ pub fn gpiod_edge_event_buffer_free(buffer: *mut gpiod_edge_event_buffer);
+}
+extern "C" {
+ #[doc = " @brief Get an event stored in the buffer."]
+ #[doc = " @param buffer Edge event buffer."]
+ #[doc = " @param index Index of the event in the buffer."]
+ #[doc = " @return Pointer to an event stored in the buffer. The lifetime of the"]
+ #[doc = "\t event is tied to the buffer object. Users must not free the event"]
+ #[doc = "\t returned by this function."]
+ pub fn gpiod_edge_event_buffer_get_event(
+ buffer: *mut gpiod_edge_event_buffer,
+ index: ::std::os::raw::c_ulong,
+ ) -> *mut gpiod_edge_event;
+}
+extern "C" {
+ #[doc = " @brief Get the number of events a buffer has stored."]
+ #[doc = " @param buffer Edge event buffer."]
+ #[doc = " @return Number of events stored in the buffer."]
+ pub fn gpiod_edge_event_buffer_get_num_events(buffer: *mut gpiod_edge_event_buffer) -> size_t;
+}
+extern "C" {
+ #[doc = " @brief Check if the file pointed to by path is a GPIO chip character device."]
+ #[doc = " @param path Path to check."]
+ #[doc = " @return True if the file exists and is either a GPIO chip character device"]
+ #[doc = "\t or a symbolic link to one."]
+ pub fn gpiod_is_gpiochip_device(path: *const ::std::os::raw::c_char) -> bool;
+}
+extern "C" {
+ #[doc = " @brief Get the API version of the library as a human-readable string."]
+ #[doc = " @return Human-readable string containing the library version."]
+ pub fn gpiod_version_string() -> *const ::std::os::raw::c_char;
+}
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH V5 3/8] libgpiod: Add rust wrapper crate
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 1/8] libgpiod: Add libgpiod-sys rust crate Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 2/8] libgpiod-sys: Add pre generated rust bindings Viresh Kumar
@ 2022-08-02 12:18 ` Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 4/8] libgpiod: Add rust examples Viresh Kumar
` (5 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
Add rust wrapper crate, around the libpiod-sys crate added earlier, to
provide a convenient interface for the users.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
bindings/rust/Cargo.toml | 1 +
bindings/rust/libgpiod/Cargo.toml | 13 +
bindings/rust/libgpiod/src/chip.rs | 253 ++++++++
bindings/rust/libgpiod/src/edge_event.rs | 102 ++++
bindings/rust/libgpiod/src/event_buffer.rs | 90 +++
bindings/rust/libgpiod/src/info_event.rs | 68 +++
bindings/rust/libgpiod/src/lib.rs | 477 +++++++++++++++
bindings/rust/libgpiod/src/line_config.rs | 586 +++++++++++++++++++
bindings/rust/libgpiod/src/line_info.rs | 180 ++++++
bindings/rust/libgpiod/src/line_request.rs | 246 ++++++++
bindings/rust/libgpiod/src/request_config.rs | 119 ++++
11 files changed, 2135 insertions(+)
create mode 100644 bindings/rust/libgpiod/Cargo.toml
create mode 100644 bindings/rust/libgpiod/src/chip.rs
create mode 100644 bindings/rust/libgpiod/src/edge_event.rs
create mode 100644 bindings/rust/libgpiod/src/event_buffer.rs
create mode 100644 bindings/rust/libgpiod/src/info_event.rs
create mode 100644 bindings/rust/libgpiod/src/lib.rs
create mode 100644 bindings/rust/libgpiod/src/line_config.rs
create mode 100644 bindings/rust/libgpiod/src/line_info.rs
create mode 100644 bindings/rust/libgpiod/src/line_request.rs
create mode 100644 bindings/rust/libgpiod/src/request_config.rs
diff --git a/bindings/rust/Cargo.toml b/bindings/rust/Cargo.toml
index d0b3a3c88ff1..1e57ef2c0002 100644
--- a/bindings/rust/Cargo.toml
+++ b/bindings/rust/Cargo.toml
@@ -2,4 +2,5 @@
members = [
"libgpiod-sys",
+ "libgpiod"
]
diff --git a/bindings/rust/libgpiod/Cargo.toml b/bindings/rust/libgpiod/Cargo.toml
new file mode 100644
index 000000000000..f25242abb153
--- /dev/null
+++ b/bindings/rust/libgpiod/Cargo.toml
@@ -0,0 +1,13 @@
+[package]
+name = "libgpiod"
+version = "0.1.0"
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+intmap = "2.0.0"
+libc = ">=0.2.39"
+libgpiod-sys = { path = "../libgpiod-sys" }
+thiserror = "1.0"
+vmm-sys-util = "=0.10.0"
diff --git a/bindings/rust/libgpiod/src/chip.rs b/bindings/rust/libgpiod/src/chip.rs
new file mode 100644
index 000000000000..4f52c3f141f4
--- /dev/null
+++ b/bindings/rust/libgpiod/src/chip.rs
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use libc::strlen;
+use std::os::raw::c_char;
+use std::path::Path;
+use std::sync::Arc;
+use std::time::Duration;
+use std::{slice, str};
+
+use vmm_sys_util::errno::Error as Errno;
+
+use super::{gpiod, info, line, request, Error, Offset, OperationType, Result};
+
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub(crate) struct Internal {
+ chip: *mut gpiod::gpiod_chip,
+}
+
+impl Internal {
+ /// Find a chip by path.
+ pub(crate) fn open<P: AsRef<Path>>(path: &P) -> Result<Self> {
+ // Null-terminate the string
+ let path = path.as_ref().to_string_lossy() + "\0";
+
+ let chip = unsafe { gpiod::gpiod_chip_open(path.as_ptr() as *const c_char) };
+ if chip.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::ChipOpen,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { chip })
+ }
+
+ /// Private helper, Returns gpiod_chip
+ pub(crate) fn chip(&self) -> *mut gpiod::gpiod_chip {
+ self.chip
+ }
+}
+
+impl Drop for Internal {
+ /// Close the chip and release all associated resources.
+ fn drop(&mut self) {
+ unsafe { gpiod::gpiod_chip_close(self.chip) }
+ }
+}
+
+/// GPIO chip
+///
+/// A GPIO chip object is associated with an open file descriptor to the GPIO
+/// character device. It exposes basic information about the chip and allows
+/// callers to retrieve information about each line, watch lines for state
+/// changes and make line requests.
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct Chip {
+ ichip: Arc<Internal>,
+ info: Info,
+}
+
+unsafe impl Send for Chip {}
+unsafe impl Sync for Chip {}
+
+impl Chip {
+ /// Find a chip by path.
+ pub fn open<P: AsRef<Path>>(path: &P) -> Result<Self> {
+ let ichip = Arc::new(Internal::open(path)?);
+ let info = Info::new(ichip.clone())?;
+
+ Ok(Self { ichip, info })
+ }
+
+ /// Get the chip name as represented in the kernel.
+ pub fn name(&self) -> Result<&str> {
+ self.info.name()
+ }
+
+ /// Get the chip label as represented in the kernel.
+ pub fn label(&self) -> Result<&str> {
+ self.info.label()
+ }
+
+ /// Get the number of GPIO lines exposed by the chip.
+ pub fn num_lines(&self) -> usize {
+ self.info.num_lines()
+ }
+
+ /// Get the path used to find the chip.
+ pub fn path(&self) -> Result<&str> {
+ // SAFETY: The string returned by libgpiod is guaranteed to live as long
+ // as the `struct Chip`.
+ let path = unsafe { gpiod::gpiod_chip_get_path(self.ichip.chip()) };
+
+ // SAFETY: The string is guaranteed to be valid here by the C API.
+ str::from_utf8(unsafe { slice::from_raw_parts(path as *const u8, strlen(path) as usize) })
+ .map_err(Error::StringNotUtf8)
+ }
+
+ /// Get information about the chip.
+ pub fn info(&self) -> Result<Info> {
+ Info::new(self.ichip.clone())
+ }
+
+ /// Get a snapshot of information about the line.
+ pub fn line_info(&self, offset: Offset) -> Result<line::Info> {
+ line::Info::new(self.ichip.clone(), offset)
+ }
+
+ /// Get the current snapshot of information about the line at given offset and start watching
+ /// it for future changes.
+ pub fn watch_line_info(&self, offset: Offset) -> Result<line::Info> {
+ line::Info::new_watch(self.ichip.clone(), offset)
+ }
+
+ /// Stop watching a line
+ pub fn unwatch(&self, offset: Offset) {
+ unsafe {
+ gpiod::gpiod_chip_unwatch_line_info(self.ichip.chip(), offset);
+ }
+ }
+
+ /// Get the file descriptor associated with the chip.
+ ///
+ /// The returned file descriptor must not be closed by the caller, else other methods for the
+ /// `struct Chip` may fail.
+ pub fn fd(&self) -> Result<u32> {
+ let fd = unsafe { gpiod::gpiod_chip_get_fd(self.ichip.chip()) };
+
+ if fd < 0 {
+ Err(Error::OperationFailed(
+ OperationType::ChipGetFd,
+ Errno::last(),
+ ))
+ } else {
+ Ok(fd as u32)
+ }
+ }
+
+ /// Wait for line status events on any of the watched lines on the chip.
+ pub fn wait_info_event(&self, timeout: Option<Duration>) -> Result<bool> {
+ let timeout = match timeout {
+ Some(x) => x.as_nanos() as i64,
+ // Block indefinitely
+ None => -1,
+ };
+
+ let ret = unsafe { gpiod::gpiod_chip_wait_info_event(self.ichip.chip(), timeout) };
+
+ match ret {
+ -1 => Err(Error::OperationFailed(
+ OperationType::ChipWaitInfoEvent,
+ Errno::last(),
+ )),
+ 0 => Ok(false),
+ _ => Ok(true),
+ }
+ }
+
+ /// Read a single line status change event from the chip. If no events are
+ /// pending, this function will block.
+ pub fn read_info_event(&self) -> Result<info::Event> {
+ info::Event::new(&self.ichip)
+ }
+
+ /// Map a GPIO line's name to its offset within the chip.
+ pub fn line_offset_from_name(&self, name: &str) -> Result<Offset> {
+ // Null-terminate the string
+ let name = name.to_owned() + "\0";
+
+ let ret = unsafe {
+ gpiod::gpiod_chip_get_line_offset_from_name(
+ self.ichip.chip(),
+ name.as_ptr() as *const c_char,
+ )
+ };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::ChipGetLine,
+ Errno::last(),
+ ))
+ } else {
+ Ok(ret as u32)
+ }
+ }
+
+ /// Request a set of lines for exclusive usage.
+ pub fn request_lines(
+ &self,
+ rconfig: &request::Config,
+ lconfig: &line::Config,
+ ) -> Result<line::Request> {
+ line::Request::new(&self.ichip, rconfig, lconfig)
+ }
+}
+
+/// GPIO chip Information
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct Info {
+ info: *mut gpiod::gpiod_chip_info,
+}
+
+impl Info {
+ /// Find a GPIO chip by path.
+ pub(crate) fn new(chip: Arc<Internal>) -> Result<Self> {
+ let info = unsafe { gpiod::gpiod_chip_get_info(chip.chip()) };
+ if info.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::ChipInfoGet,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { info })
+ }
+
+ /// Get the GPIO chip name as represented in the kernel.
+ pub(crate) fn name(&self) -> Result<&str> {
+ // SAFETY: The string returned by libgpiod is guaranteed to live as long
+ // as the `struct Chip`.
+ let name = unsafe { gpiod::gpiod_chip_info_get_name(self.info) };
+
+ // SAFETY: The string is guaranteed to be valid here by the C API.
+ str::from_utf8(unsafe { slice::from_raw_parts(name as *const u8, strlen(name) as usize) })
+ .map_err(Error::StringNotUtf8)
+ }
+
+ /// Get the GPIO chip label as represented in the kernel.
+ pub(crate) fn label(&self) -> Result<&str> {
+ // SAFETY: The string returned by libgpiod is guaranteed to live as long
+ // as the `struct Chip`.
+ let label = unsafe { gpiod::gpiod_chip_info_get_label(self.info) };
+
+ // SAFETY: The string is guaranteed to be valid here by the C API.
+ str::from_utf8(unsafe { slice::from_raw_parts(label as *const u8, strlen(label) as usize) })
+ .map_err(Error::StringNotUtf8)
+ }
+
+ /// Get the number of GPIO lines exposed by the chip.
+ pub(crate) fn num_lines(&self) -> usize {
+ unsafe { gpiod::gpiod_chip_info_get_num_lines(self.info) as usize }
+ }
+}
+
+impl Drop for Info {
+ /// Close the GPIO chip info and release all associated resources.
+ fn drop(&mut self) {
+ unsafe { gpiod::gpiod_chip_info_free(self.info) }
+ }
+}
diff --git a/bindings/rust/libgpiod/src/edge_event.rs b/bindings/rust/libgpiod/src/edge_event.rs
new file mode 100644
index 000000000000..ce583916a2e3
--- /dev/null
+++ b/bindings/rust/libgpiod/src/edge_event.rs
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use std::sync::Arc;
+use std::time::Duration;
+
+use vmm_sys_util::errno::Error as Errno;
+
+use super::{edge::event::BufferInternal, gpiod, EdgeKind, Error, Offset, OperationType, Result};
+
+/// Line edge events handling
+///
+/// An edge event object contains information about a single line edge event.
+/// It contains the event type, timestamp and the offset of the line on which
+/// the event occurred as well as two sequence numbers (global for all lines
+/// in the associated request and local for this line only).
+///
+/// Edge events are stored into an edge-event buffer object to improve
+/// performance and to limit the number of memory allocations when a large
+/// number of events are being read.
+
+#[derive(Debug, Eq, PartialEq)]
+pub struct Event {
+ ibuffer: Option<Arc<BufferInternal>>,
+ event: *mut gpiod::gpiod_edge_event,
+}
+
+impl Event {
+ /// Get an event stored in the buffer.
+ pub(crate) fn new(ibuffer: &Arc<BufferInternal>, index: u64) -> Result<Self> {
+ let event = unsafe { gpiod::gpiod_edge_event_buffer_get_event(ibuffer.buffer(), index) };
+ if event.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::EdgeEventBufferGetEvent,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self {
+ ibuffer: Some(ibuffer.clone()),
+ event,
+ })
+ }
+
+ pub fn event_clone(&self) -> Result<Self> {
+ let event = unsafe { gpiod::gpiod_edge_event_copy(self.event) };
+ if event.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::EdgeEventCopy,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self {
+ ibuffer: None,
+ event,
+ })
+ }
+
+ /// Get the event type.
+ pub fn event_type(&self) -> Result<EdgeKind> {
+ EdgeKind::new(unsafe { gpiod::gpiod_edge_event_get_event_type(self.event) } as u32)
+ }
+
+ /// Get the timestamp of the event.
+ pub fn timestamp(&self) -> Duration {
+ Duration::from_nanos(unsafe { gpiod::gpiod_edge_event_get_timestamp_ns(self.event) })
+ }
+
+ /// Get the offset of the line on which the event was triggered.
+ pub fn line_offset(&self) -> Offset {
+ unsafe { gpiod::gpiod_edge_event_get_line_offset(self.event) }
+ }
+
+ /// Get the global sequence number of the event.
+ ///
+ /// Returns sequence number of the event relative to all lines in the
+ /// associated line request.
+ pub fn global_seqno(&self) -> u64 {
+ unsafe { gpiod::gpiod_edge_event_get_global_seqno(self.event) }
+ }
+
+ /// Get the event sequence number specific to concerned line.
+ ///
+ /// Returns sequence number of the event relative to the line within the
+ /// lifetime of the associated line request.
+ pub fn line_seqno(&self) -> u64 {
+ unsafe { gpiod::gpiod_edge_event_get_line_seqno(self.event) }
+ }
+}
+
+impl Drop for Event {
+ /// Free the edge event.
+ fn drop(&mut self) {
+ // Free the event only if a copy is made
+ if self.ibuffer.is_none() {
+ unsafe { gpiod::gpiod_edge_event_free(self.event) };
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/src/event_buffer.rs b/bindings/rust/libgpiod/src/event_buffer.rs
new file mode 100644
index 000000000000..e272e7aa9e9d
--- /dev/null
+++ b/bindings/rust/libgpiod/src/event_buffer.rs
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use std::os::raw::c_ulong;
+use std::sync::Arc;
+
+use vmm_sys_util::errno::Error as Errno;
+
+use super::{edge, gpiod, Error, OperationType, Result};
+
+/// Line edge events buffer
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub(crate) struct BufferInternal {
+ buffer: *mut gpiod::gpiod_edge_event_buffer,
+}
+
+impl BufferInternal {
+ /// Create a new edge event buffer.
+ ///
+ /// If capacity equals 0, it will be set to a default value of 64. If
+ /// capacity is larger than 1024, it will be limited to 1024.
+ pub fn new(capacity: usize) -> Result<Self> {
+ let buffer = unsafe { gpiod::gpiod_edge_event_buffer_new(capacity as c_ulong) };
+ if buffer.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::EdgeEventBufferNew,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { buffer })
+ }
+
+ /// Private helper, Returns gpiod_edge_event_buffer
+ pub(crate) fn buffer(&self) -> *mut gpiod::gpiod_edge_event_buffer {
+ self.buffer
+ }
+}
+
+impl Drop for BufferInternal {
+ /// Free the edge event buffer and release all associated resources.
+ fn drop(&mut self) {
+ unsafe { gpiod::gpiod_edge_event_buffer_free(self.buffer) };
+ }
+}
+
+/// Line edge events buffer
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct Buffer {
+ ibuffer: Arc<BufferInternal>,
+}
+
+impl Buffer {
+ /// Create a new edge event buffer.
+ ///
+ /// If capacity equals 0, it will be set to a default value of 64. If
+ /// capacity is larger than 1024, it will be limited to 1024.
+ pub fn new(capacity: usize) -> Result<Self> {
+ Ok(Self {
+ ibuffer: Arc::new(BufferInternal::new(capacity)?),
+ })
+ }
+
+ /// Private helper, Returns gpiod_edge_event_buffer
+ pub(crate) fn buffer(&self) -> *mut gpiod::gpiod_edge_event_buffer {
+ self.ibuffer.buffer()
+ }
+
+ /// Get the capacity of the event buffer.
+ pub fn capacity(&self) -> usize {
+ unsafe { gpiod::gpiod_edge_event_buffer_get_capacity(self.buffer()) as usize }
+ }
+
+ /// Read an event stored in the buffer.
+ pub fn event(&self, index: u64) -> Result<edge::Event> {
+ edge::Event::new(&self.ibuffer, index)
+ }
+
+ /// Get the number of events the buffer contains.
+ pub fn len(&self) -> usize {
+ unsafe { gpiod::gpiod_edge_event_buffer_get_num_events(self.buffer()) as usize }
+ }
+
+ /// Check if buffer is empty.
+ pub fn is_empty(&self) -> bool {
+ self.len() == 0
+ }
+}
diff --git a/bindings/rust/libgpiod/src/info_event.rs b/bindings/rust/libgpiod/src/info_event.rs
new file mode 100644
index 000000000000..d8be87df6679
--- /dev/null
+++ b/bindings/rust/libgpiod/src/info_event.rs
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use std::sync::Arc;
+use std::time::Duration;
+
+use vmm_sys_util::errno::Error as Errno;
+
+use super::{chip, gpiod, line, Error, InfoChangeKind, OperationType, Result};
+
+/// Line status watch events
+///
+/// Accessors for the info event objects allowing to monitor changes in GPIO
+/// line state.
+///
+/// Callers can be notified about changes in line's state using the interfaces
+/// exposed by GPIO chips. Each info event contains information about the event
+/// itself (timestamp, type) as well as a snapshot of line's state in the form
+/// of a line-info object.
+
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct Event {
+ event: *mut gpiod::gpiod_info_event,
+}
+
+impl Event {
+ /// Get a single chip's line's status change event.
+ pub(crate) fn new(ichip: &Arc<chip::Internal>) -> Result<Self> {
+ let event = unsafe { gpiod::gpiod_chip_read_info_event(ichip.chip()) };
+ if event.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::ChipReadInfoEvent,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { event })
+ }
+
+ /// Private helper, Returns gpiod_info_event
+ pub(crate) fn event(&self) -> *mut gpiod::gpiod_info_event {
+ self.event
+ }
+
+ /// Get the event type of the status change event.
+ pub fn event_type(&self) -> Result<InfoChangeKind> {
+ InfoChangeKind::new(unsafe { gpiod::gpiod_info_event_get_event_type(self.event) } as u32)
+ }
+
+ /// Get the timestamp of the event, read from the monotonic clock.
+ pub fn timestamp(&self) -> Duration {
+ Duration::from_nanos(unsafe { gpiod::gpiod_info_event_get_timestamp_ns(self.event) })
+ }
+
+ /// Get the line-info object associated with the event.
+ pub fn line_info(&self) -> Result<line::Info> {
+ line::Info::new_from_event(self)
+ }
+}
+
+impl Drop for Event {
+ /// Free the info event object and release all associated resources.
+ fn drop(&mut self) {
+ unsafe { gpiod::gpiod_info_event_free(self.event) }
+ }
+}
diff --git a/bindings/rust/libgpiod/src/lib.rs b/bindings/rust/libgpiod/src/lib.rs
new file mode 100644
index 000000000000..4d49384c60f1
--- /dev/null
+++ b/bindings/rust/libgpiod/src/lib.rs
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Rust wrappers for GPIOD APIs
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+//! libgpiod public API
+//!
+//! This is the complete documentation of the public Rust API made available to
+//! users of libgpiod.
+//!
+//! The API is logically split into several parts such as: GPIO chip & line
+//! operators, GPIO events handling etc.
+
+/// GPIO chip related definitions.
+pub mod chip;
+
+mod edge_event;
+mod event_buffer;
+
+/// GPIO chip edge event related definitions.
+pub mod edge {
+ pub use crate::edge_event::*;
+
+ /// GPIO chip edge event buffer related definitions.
+ pub mod event {
+ pub use crate::event_buffer::*;
+ }
+}
+
+mod info_event;
+
+/// GPIO chip info event related definitions.
+pub mod info {
+ pub use crate::info_event::*;
+}
+
+mod line_config;
+mod line_info;
+mod line_request;
+
+/// GPIO chip line related definitions.
+pub mod line {
+ pub use crate::line_config::*;
+ pub use crate::line_info::*;
+ pub use crate::line_request::*;
+}
+
+mod request_config;
+
+/// GPIO chip request related definitions.
+pub mod request {
+ pub use crate::request_config::*;
+}
+
+use libgpiod_sys as gpiod;
+
+use intmap::IntMap;
+use libc::strlen;
+use std::fs;
+use std::os::raw::c_char;
+use std::path::Path;
+use std::time::Duration;
+use std::{fmt, slice, str};
+
+use thiserror::Error as ThisError;
+use vmm_sys_util::errno::Error as Errno;
+
+/// Operation types, used with OperationFailed() Error.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum OperationType {
+ ChipOpen,
+ ChipGetFd,
+ ChipWaitInfoEvent,
+ ChipGetLine,
+ ChipGetLineInfo,
+ ChipInfoGet,
+ ChipReadInfoEvent,
+ ChipWatchLineInfo,
+ EdgeEventBufferGetEvent,
+ EdgeEventCopy,
+ EdgeEventBufferNew,
+ InfoEventGetLineInfo,
+ LineConfigNew,
+ LineConfigGetOutValDefault,
+ LineConfigGetOutValOffset,
+ LineRequest,
+ LineRequestReconfigLines,
+ LineRequestGetVal,
+ LineRequestGetValSubset,
+ LineRequestSetVal,
+ LineRequestSetValSubset,
+ LineRequestReadEdgeEvent,
+ LineRequestWaitEdgeEvent,
+ RequestConfigNew,
+ RequestConfigGetConsumer,
+ SimBankGetVal,
+ SimBankNew,
+ SimBankSetLabel,
+ SimBankSetNumLines,
+ SimBankSetLineName,
+ SimBankSetPull,
+ SimBankHogLine,
+ SimCtxNew,
+ SimDevNew,
+ SimDevEnable,
+ SimDevDisable,
+}
+
+impl fmt::Display for OperationType {
+ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+ write!(f, "{:?}", self)
+ }
+}
+
+/// Result of libgpiod operations.
+pub type Result<T> = std::result::Result<T, Error>;
+
+/// Error codes for libgpiod operations.
+#[derive(Copy, Clone, Debug, PartialEq, ThisError)]
+pub enum Error {
+ #[error("Failed to get {0}")]
+ NullString(&'static str),
+ #[error("String not utf8: {0:?}")]
+ StringNotUtf8(str::Utf8Error),
+ #[error("Invalid enum {0} value: {1}")]
+ InvalidEnumValue(&'static str, u32),
+ #[error("Operation {0} Failed: {1}")]
+ OperationFailed(OperationType, Errno),
+ #[error("Setting mismatch, expected {0} found: {1}")]
+ SettingMismatch(Setting, Setting),
+ #[error("Invalid Arguments")]
+ InvalidArguments,
+ #[error("Std Io Error")]
+ IoError,
+}
+
+/// Value settings.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum Value {
+ /// Active
+ Active,
+ /// Inactive
+ InActive,
+}
+
+/// Maps offset to Value.
+pub type ValueMap = IntMap<Value>;
+
+impl Value {
+ pub fn new(val: i32) -> Result<Self> {
+ match val {
+ 0 => Ok(Value::InActive),
+ 1 => Ok(Value::Active),
+ _ => Err(Error::InvalidEnumValue("Value", val as u32)),
+ }
+ }
+
+ fn value(&self) -> i32 {
+ match self {
+ Value::Active => 1,
+ Value::InActive => 0,
+ }
+ }
+}
+
+/// Offset type.
+pub type Offset = u32;
+
+/// Direction settings.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum Direction {
+ /// Request the line(s), but don't change direction.
+ AsIs,
+ /// Direction is input - for reading the value of an externally driven GPIO line.
+ Input,
+ /// Direction is output - for driving the GPIO line.
+ Output,
+}
+
+impl Direction {
+ fn new(dir: u32) -> Result<Self> {
+ match dir {
+ gpiod::GPIOD_LINE_DIRECTION_AS_IS => Ok(Direction::AsIs),
+ gpiod::GPIOD_LINE_DIRECTION_INPUT => Ok(Direction::Input),
+ gpiod::GPIOD_LINE_DIRECTION_OUTPUT => Ok(Direction::Output),
+ _ => Err(Error::InvalidEnumValue("Direction", dir)),
+ }
+ }
+
+ fn gpiod_direction(&self) -> u32 {
+ match self {
+ Direction::AsIs => gpiod::GPIOD_LINE_DIRECTION_AS_IS,
+ Direction::Input => gpiod::GPIOD_LINE_DIRECTION_INPUT,
+ Direction::Output => gpiod::GPIOD_LINE_DIRECTION_OUTPUT,
+ }
+ }
+}
+
+/// Internal bias settings.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum Bias {
+ /// The internal bias is disabled.
+ Disabled,
+ /// The internal pull-up bias is enabled.
+ PullUp,
+ /// The internal pull-down bias is enabled.
+ PullDown,
+}
+
+impl Bias {
+ fn new(bias: u32) -> Result<Option<Self>> {
+ match bias {
+ gpiod::GPIOD_LINE_BIAS_UNKNOWN => Ok(None),
+ gpiod::GPIOD_LINE_BIAS_AS_IS => Ok(None),
+ gpiod::GPIOD_LINE_BIAS_DISABLED => Ok(Some(Bias::Disabled)),
+ gpiod::GPIOD_LINE_BIAS_PULL_UP => Ok(Some(Bias::PullUp)),
+ gpiod::GPIOD_LINE_BIAS_PULL_DOWN => Ok(Some(Bias::PullDown)),
+ _ => Err(Error::InvalidEnumValue("Bias", bias)),
+ }
+ }
+
+ fn gpiod_bias(bias: Option<Bias>) -> u32 {
+ match bias {
+ None => gpiod::GPIOD_LINE_BIAS_AS_IS,
+ Some(bias) => match bias {
+ Bias::Disabled => gpiod::GPIOD_LINE_BIAS_DISABLED,
+ Bias::PullUp => gpiod::GPIOD_LINE_BIAS_PULL_UP,
+ Bias::PullDown => gpiod::GPIOD_LINE_BIAS_PULL_DOWN,
+ },
+ }
+ }
+}
+
+/// Drive settings.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum Drive {
+ /// Drive setting is push-pull.
+ PushPull,
+ /// Line output is open-drain.
+ OpenDrain,
+ /// Line output is open-source.
+ OpenSource,
+}
+
+impl Drive {
+ fn new(drive: u32) -> Result<Self> {
+ match drive {
+ gpiod::GPIOD_LINE_DRIVE_PUSH_PULL => Ok(Drive::PushPull),
+ gpiod::GPIOD_LINE_DRIVE_OPEN_DRAIN => Ok(Drive::OpenDrain),
+ gpiod::GPIOD_LINE_DRIVE_OPEN_SOURCE => Ok(Drive::OpenSource),
+ _ => Err(Error::InvalidEnumValue("Drive", drive)),
+ }
+ }
+
+ fn gpiod_drive(&self) -> u32 {
+ match self {
+ Drive::PushPull => gpiod::GPIOD_LINE_DRIVE_PUSH_PULL,
+ Drive::OpenDrain => gpiod::GPIOD_LINE_DRIVE_OPEN_DRAIN,
+ Drive::OpenSource => gpiod::GPIOD_LINE_DRIVE_OPEN_SOURCE,
+ }
+ }
+}
+
+/// Edge detection settings.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum Edge {
+ /// Line detects rising edge events.
+ Rising,
+ /// Line detects falling edge events.
+ Falling,
+ /// Line detects both rising and falling edge events.
+ Both,
+}
+
+impl Edge {
+ fn new(edge: u32) -> Result<Option<Self>> {
+ match edge {
+ gpiod::GPIOD_LINE_EDGE_NONE => Ok(None),
+ gpiod::GPIOD_LINE_EDGE_RISING => Ok(Some(Edge::Rising)),
+ gpiod::GPIOD_LINE_EDGE_FALLING => Ok(Some(Edge::Falling)),
+ gpiod::GPIOD_LINE_EDGE_BOTH => Ok(Some(Edge::Both)),
+ _ => Err(Error::InvalidEnumValue("Edge", edge)),
+ }
+ }
+
+ fn gpiod_edge(edge: Option<Edge>) -> u32 {
+ match edge {
+ None => gpiod::GPIOD_LINE_EDGE_NONE,
+ Some(edge) => match edge {
+ Edge::Rising => gpiod::GPIOD_LINE_EDGE_RISING,
+ Edge::Falling => gpiod::GPIOD_LINE_EDGE_FALLING,
+ Edge::Both => gpiod::GPIOD_LINE_EDGE_BOTH,
+ },
+ }
+ }
+}
+
+/// Line setting kind.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum SettingKind {
+ /// Line direction.
+ Direction,
+ /// Bias.
+ Bias,
+ /// Drive.
+ Drive,
+ /// Edge detection.
+ EdgeDetection,
+ /// Active-low setting.
+ ActiveLow,
+ /// Debounce period.
+ DebouncePeriod,
+ /// Event clock type.
+ EventClock,
+ /// Output value.
+ OutputValue,
+}
+
+/// Maps offset to SettingKind.
+pub type SettingKindMap = IntMap<SettingKind>;
+
+impl SettingKind {
+ fn new(kind: u32) -> Result<Self> {
+ match kind {
+ gpiod::GPIOD_LINE_CONFIG_PROP_DIRECTION => Ok(SettingKind::Direction),
+ gpiod::GPIOD_LINE_CONFIG_PROP_EDGE_DETECTION => Ok(SettingKind::EdgeDetection),
+ gpiod::GPIOD_LINE_CONFIG_PROP_BIAS => Ok(SettingKind::Bias),
+ gpiod::GPIOD_LINE_CONFIG_PROP_DRIVE => Ok(SettingKind::Drive),
+ gpiod::GPIOD_LINE_CONFIG_PROP_ACTIVE_LOW => Ok(SettingKind::ActiveLow),
+ gpiod::GPIOD_LINE_CONFIG_PROP_DEBOUNCE_PERIOD_US => Ok(SettingKind::DebouncePeriod),
+ gpiod::GPIOD_LINE_CONFIG_PROP_EVENT_CLOCK => Ok(SettingKind::EventClock),
+ gpiod::GPIOD_LINE_CONFIG_PROP_OUTPUT_VALUE => Ok(SettingKind::OutputValue),
+ _ => Err(Error::InvalidEnumValue("SettingKind", kind)),
+ }
+ }
+}
+
+/// Line settings.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum Setting {
+ /// Line direction.
+ Direction(Direction),
+ /// Bias.
+ Bias(Option<Bias>),
+ /// Drive.
+ Drive(Drive),
+ /// Edge detection.
+ EdgeDetection(Option<Edge>),
+ /// Active-low setting.
+ ActiveLow(bool),
+ /// Debounce period.
+ DebouncePeriod(Duration),
+ /// Event clock type.
+ EventClock(EventClock),
+ /// Output value.
+ OutputValue(Value),
+}
+
+/// Maps offset to Setting.
+pub type SettingMap = IntMap<Setting>;
+
+impl fmt::Display for Setting {
+ fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+ write!(f, "{:?}", self)
+ }
+}
+
+/// Event clock settings.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum EventClock {
+ /// Line uses the monotonic clock for edge event timestamps.
+ Monotonic,
+ /// Line uses the realtime clock for edge event timestamps.
+ Realtime,
+}
+
+impl EventClock {
+ fn new(clock: u32) -> Result<Self> {
+ match clock {
+ gpiod::GPIOD_LINE_EVENT_CLOCK_MONOTONIC => Ok(EventClock::Monotonic),
+ gpiod::GPIOD_LINE_EVENT_CLOCK_REALTIME => Ok(EventClock::Realtime),
+ _ => Err(Error::InvalidEnumValue("Eventclock", clock)),
+ }
+ }
+
+ fn gpiod_clock(&self) -> u32 {
+ match self {
+ EventClock::Monotonic => gpiod::GPIOD_LINE_EVENT_CLOCK_MONOTONIC,
+ EventClock::Realtime => gpiod::GPIOD_LINE_EVENT_CLOCK_REALTIME,
+ }
+ }
+}
+
+/// Line status change event types.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum InfoChangeKind {
+ /// Line has been requested.
+ LineRequested,
+ /// Previously requested line has been released.
+ LineReleased,
+ /// Line configuration has changed.
+ LineConfigChanged,
+}
+
+impl InfoChangeKind {
+ fn new(kind: u32) -> Result<Self> {
+ match kind {
+ gpiod::GPIOD_INFO_EVENT_LINE_REQUESTED => Ok(InfoChangeKind::LineRequested),
+ gpiod::GPIOD_INFO_EVENT_LINE_RELEASED => Ok(InfoChangeKind::LineReleased),
+ gpiod::GPIOD_INFO_EVENT_LINE_CONFIG_CHANGED => Ok(InfoChangeKind::LineConfigChanged),
+ _ => Err(Error::InvalidEnumValue("InfoChangeKind", kind)),
+ }
+ }
+}
+
+/// Edge event types.
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum EdgeKind {
+ /// Rising edge event.
+ Rising,
+ /// Falling edge event.
+ Falling,
+}
+
+impl EdgeKind {
+ fn new(kind: u32) -> Result<Self> {
+ match kind {
+ gpiod::GPIOD_EDGE_EVENT_RISING_EDGE => Ok(EdgeKind::Rising),
+ gpiod::GPIOD_EDGE_EVENT_FALLING_EDGE => Ok(EdgeKind::Falling),
+ _ => Err(Error::InvalidEnumValue("EdgeEvent", kind)),
+ }
+ }
+}
+
+/// Various libgpiod-related functions.
+
+/// Check if the file pointed to by path is a GPIO chip character device.
+///
+/// Returns true if the file exists and is a GPIO chip character device or a
+/// symbolic link to it.
+pub fn is_gpiochip_device<P: AsRef<Path>>(path: &P) -> bool {
+ // Null-terminate the string
+ let path = path.as_ref().to_string_lossy() + "\0";
+
+ unsafe { gpiod::gpiod_is_gpiochip_device(path.as_ptr() as *const c_char) }
+}
+
+/// Iterator for GPIO devices.
+pub fn gpiochip_devices<P: AsRef<Path>>(path: &P) -> Result<Vec<chip::Chip>> {
+ let mut chips = Vec::new();
+
+ for entry in fs::read_dir(path).map_err(|_| Error::IoError)?.flatten() {
+ let path = entry.path();
+
+ if is_gpiochip_device(&path) {
+ chips.push(chip::Chip::open(&path)?);
+ }
+ }
+
+ Ok(chips)
+}
+
+/// Get the API version of the library as a human-readable string.
+pub fn version_string() -> Result<&'static str> {
+ // SAFETY: The string returned by libgpiod is guaranteed to live forever.
+ let version = unsafe { gpiod::gpiod_version_string() };
+
+ if version.is_null() {
+ return Err(Error::NullString("GPIO library version"));
+ }
+
+ // SAFETY: The string is guaranteed to be valid here by the C API.
+ str::from_utf8(unsafe { slice::from_raw_parts(version as *const u8, strlen(version) as usize) })
+ .map_err(Error::StringNotUtf8)
+}
diff --git a/bindings/rust/libgpiod/src/line_config.rs b/bindings/rust/libgpiod/src/line_config.rs
new file mode 100644
index 000000000000..148039cafa33
--- /dev/null
+++ b/bindings/rust/libgpiod/src/line_config.rs
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use std::os::raw::c_ulong;
+use std::time::Duration;
+
+use vmm_sys_util::errno::Error as Errno;
+
+use super::{
+ gpiod, Bias, Direction, Drive, Edge, Error, EventClock, Offset, OperationType, Result, Setting,
+ SettingKind, SettingKindMap, SettingMap, Value, ValueMap,
+};
+
+/// Line configuration objects.
+///
+/// The line-config object contains the configuration for lines that can be
+/// used in two cases:
+/// - when making a line request
+/// - when reconfiguring a set of already requested lines.
+///
+/// A new line-config object is instantiated with a set of sane defaults
+/// for all supported configuration settings. Those defaults can be modified by
+/// the caller. Default values can be overridden by applying different values
+/// for specific lines. When making a request or reconfiguring an existing one,
+/// the overridden settings for specific lines take precedence. For lines
+/// without an override the requested default settings are used.
+///
+/// For every setting there are two mutators (one setting the default and one
+/// for the per-line override), two getters (one for reading the global
+/// default and one for retrieving the effective value for the line),
+/// a function for testing if a setting is overridden for the line
+/// and finally a function for clearing the overrides (per line).
+///
+/// The mutators don't return errors. If the set of options is too complex to
+/// be translated into kernel uAPI structures then an error will be returned at
+/// the time of the request or reconfiguration. If an invalid value was passed
+/// to any of the mutators then the default value will be silently used instead.
+///
+/// Operating on lines in struct Config has no immediate effect on real
+/// GPIOs, it only manipulates the config object in memory. Those changes are
+/// only applied to the hardware at the time of the request or reconfiguration.
+///
+/// Overrides for lines that don't end up being requested are silently ignored
+/// both in line::Request::new() as well as in line::Request::reconfigure_lines().
+///
+/// In cases where all requested lines are using the one configuration, the
+/// line overrides can be entirely ignored when preparing the configuration.
+
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct Config {
+ config: *mut gpiod::gpiod_line_config,
+}
+
+impl Config {
+ /// Create a new line config object.
+ pub fn new() -> Result<Self> {
+ let config = unsafe { gpiod::gpiod_line_config_new() };
+
+ if config.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::LineConfigNew,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { config })
+ }
+
+ /// Private helper, Returns gpiod_line_config
+ pub(crate) fn config(&self) -> *mut gpiod::gpiod_line_config {
+ self.config
+ }
+
+ /// Resets the entire configuration stored in the object. This is useful if
+ /// the user wants to reuse the object without reallocating it.
+ pub fn reset(&mut self) {
+ unsafe { gpiod::gpiod_line_config_reset(self.config) }
+ }
+
+ /// Set the default for line property.
+ pub fn set_prop_default(&mut self, values: &[Setting]) {
+ for value in values {
+ match value {
+ Setting::Direction(val) => self.set_direction_default(*val),
+ Setting::EdgeDetection(val) => self.set_edge_detection_default(*val),
+ Setting::Bias(val) => self.set_bias_default(*val),
+ Setting::Drive(val) => self.set_drive_default(*val),
+ Setting::ActiveLow(val) => self.set_active_low_default(*val),
+ Setting::DebouncePeriod(val) => self.set_debounce_period_default(*val),
+ Setting::EventClock(val) => self.set_event_clock_default(*val),
+ Setting::OutputValue(val) => self.set_output_value_default(*val),
+ }
+ }
+ }
+
+ /// Set the override for line property.
+ pub fn set_prop_override(&mut self, map: SettingMap) {
+ for (offset, value) in map {
+ match value {
+ Setting::Direction(val) => self.set_direction_override(val, offset as u32),
+ Setting::EdgeDetection(val) => self.set_edge_detection_override(val, offset as u32),
+ Setting::Bias(val) => self.set_bias_override(val, offset as u32),
+ Setting::Drive(val) => self.set_drive_override(val, offset as u32),
+ Setting::ActiveLow(val) => self.set_active_low_override(val, offset as u32),
+ Setting::DebouncePeriod(val) => {
+ self.set_debounce_period_override(val, offset as u32)
+ }
+ Setting::EventClock(val) => self.set_event_clock_override(val, offset as u32),
+ Setting::OutputValue(val) => self.set_output_value_override(val, offset as u32),
+ }
+ }
+ }
+
+ /// Clear the override for line property.
+ pub fn clear_prop_override(&mut self, map: SettingKindMap) {
+ for (offset, prop) in map {
+ match prop {
+ SettingKind::Direction => self.clear_direction_override(offset as u32),
+ SettingKind::EdgeDetection => self.clear_edge_detection_override(offset as u32),
+ SettingKind::Bias => self.clear_bias_override(offset as u32),
+ SettingKind::Drive => self.clear_drive_override(offset as u32),
+ SettingKind::ActiveLow => self.clear_active_low_override(offset as u32),
+ SettingKind::DebouncePeriod => self.clear_debounce_period_override(offset as u32),
+ SettingKind::EventClock => self.clear_event_clock_override(offset as u32),
+ SettingKind::OutputValue => self.clear_output_value_override(offset as u32),
+ }
+ }
+ }
+
+ /// Check if the prop is overridden for a line.
+ pub fn prop_is_overridden(&self, property: SettingKind, offset: Offset) -> bool {
+ match property {
+ SettingKind::Direction => self.direction_is_overridden(offset),
+ SettingKind::EdgeDetection => self.edge_detection_is_overridden(offset),
+ SettingKind::Bias => self.bias_is_overridden(offset),
+ SettingKind::Drive => self.drive_is_overridden(offset),
+ SettingKind::ActiveLow => self.active_low_is_overridden(offset),
+ SettingKind::DebouncePeriod => self.debounce_period_is_overridden(offset),
+ SettingKind::EventClock => self.event_clock_is_overridden(offset),
+ SettingKind::OutputValue => self.output_value_is_overridden(offset),
+ }
+ }
+
+ /// Get the default prop setting.
+ pub fn prop_default(&self, property: SettingKind) -> Result<Setting> {
+ Ok(match property {
+ SettingKind::Direction => Setting::Direction(self.direction_default()?),
+ SettingKind::EdgeDetection => Setting::EdgeDetection(self.edge_detection_default()?),
+ SettingKind::Bias => Setting::Bias(self.bias_default()?),
+ SettingKind::Drive => Setting::Drive(self.drive_default()?),
+ SettingKind::ActiveLow => Setting::ActiveLow(self.active_low_default()),
+ SettingKind::DebouncePeriod => Setting::DebouncePeriod(self.debounce_period_default()?),
+ SettingKind::EventClock => Setting::EventClock(self.event_clock_default()?),
+ SettingKind::OutputValue => Setting::OutputValue(self.output_value_default()?),
+ })
+ }
+
+ /// Get the prop setting for an offset.
+ pub fn prop_offset(&self, property: SettingKind, offset: Offset) -> Result<Setting> {
+ Ok(match property {
+ SettingKind::Direction => Setting::Direction(self.direction_offset(offset)?),
+ SettingKind::EdgeDetection => {
+ Setting::EdgeDetection(self.edge_detection_offset(offset)?)
+ }
+ SettingKind::Bias => Setting::Bias(self.bias_offset(offset)?),
+ SettingKind::Drive => Setting::Drive(self.drive_offset(offset)?),
+ SettingKind::ActiveLow => Setting::ActiveLow(self.active_low_offset(offset)),
+ SettingKind::DebouncePeriod => {
+ Setting::DebouncePeriod(self.debounce_period_offset(offset)?)
+ }
+ SettingKind::EventClock => Setting::EventClock(self.event_clock_offset(offset)?),
+ SettingKind::OutputValue => Setting::OutputValue(self.output_value_offset(offset)?),
+ })
+ }
+
+ /// Set the default line direction.
+ fn set_direction_default(&mut self, direction: Direction) {
+ unsafe {
+ gpiod::gpiod_line_config_set_direction_default(
+ self.config,
+ direction.gpiod_direction() as i32,
+ )
+ }
+ }
+
+ /// Set the direction for a line.
+ fn set_direction_override(&mut self, direction: Direction, offset: Offset) {
+ unsafe {
+ gpiod::gpiod_line_config_set_direction_override(
+ self.config,
+ direction.gpiod_direction() as i32,
+ offset,
+ )
+ }
+ }
+
+ /// Clear the direction for a line.
+ fn clear_direction_override(&mut self, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_clear_direction_override(self.config, offset) }
+ }
+
+ /// Check if the direction is overridden for a line.
+ fn direction_is_overridden(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_direction_is_overridden(self.config, offset) }
+ }
+
+ /// Get the default direction setting.
+ fn direction_default(&self) -> Result<Direction> {
+ Direction::new(
+ unsafe { gpiod::gpiod_line_config_get_direction_default(self.config) } as u32,
+ )
+ }
+
+ /// Get the direction of a given line.
+ ///
+ /// Direction setting for the line if the config object were used in a request.
+ fn direction_offset(&self, offset: Offset) -> Result<Direction> {
+ Direction::new(
+ unsafe { gpiod::gpiod_line_config_get_direction_offset(self.config, offset) } as u32,
+ )
+ }
+
+ /// Set the default edge event detection setting.
+ fn set_edge_detection_default(&mut self, edge: Option<Edge>) {
+ unsafe {
+ gpiod::gpiod_line_config_set_edge_detection_default(
+ self.config,
+ Edge::gpiod_edge(edge) as i32,
+ )
+ }
+ }
+
+ /// Set the edge event detection for a single line.
+ fn set_edge_detection_override(&mut self, edge: Option<Edge>, offset: Offset) {
+ unsafe {
+ gpiod::gpiod_line_config_set_edge_detection_override(
+ self.config,
+ Edge::gpiod_edge(edge) as i32,
+ offset,
+ )
+ }
+ }
+
+ /// Clear the edge event detection for a single line.
+ fn clear_edge_detection_override(&mut self, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_clear_edge_detection_override(self.config, offset) }
+ }
+
+ /// Check if the edge event detection is overridden for a line.
+ fn edge_detection_is_overridden(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_edge_detection_is_overridden(self.config, offset) }
+ }
+
+ /// Get the default edge event detection setting.
+ fn edge_detection_default(&self) -> Result<Option<Edge>> {
+ Edge::new(
+ unsafe { gpiod::gpiod_line_config_get_edge_detection_default(self.config) } as u32,
+ )
+ }
+
+ /// Get the edge event detection setting for a given line.
+ ///
+ /// Edge event detection setting for the line if the config object were used in a request.
+ fn edge_detection_offset(&self, offset: Offset) -> Result<Option<Edge>> {
+ Edge::new(
+ unsafe { gpiod::gpiod_line_config_get_edge_detection_offset(self.config, offset) }
+ as u32,
+ )
+ }
+
+ /// Set the default bias setting.
+ fn set_bias_default(&mut self, bias: Option<Bias>) {
+ unsafe {
+ gpiod::gpiod_line_config_set_bias_default(self.config, Bias::gpiod_bias(bias) as i32)
+ }
+ }
+
+ /// Set the bias for a single line.
+ fn set_bias_override(&mut self, bias: Option<Bias>, offset: Offset) {
+ unsafe {
+ gpiod::gpiod_line_config_set_bias_override(
+ self.config,
+ Bias::gpiod_bias(bias) as i32,
+ offset,
+ )
+ }
+ }
+
+ /// Clear the bias for a single line.
+ fn clear_bias_override(&mut self, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_clear_bias_override(self.config, offset) }
+ }
+
+ /// Check if the bias is overridden for a line.
+ fn bias_is_overridden(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_bias_is_overridden(self.config, offset) }
+ }
+
+ /// Get the default bias setting.
+ fn bias_default(&self) -> Result<Option<Bias>> {
+ Bias::new(unsafe { gpiod::gpiod_line_config_get_bias_default(self.config) } as u32)
+ }
+
+ /// Get the bias setting for a given line.
+ ///
+ /// Bias setting used for the line if the config object were used in a request.
+ fn bias_offset(&self, offset: Offset) -> Result<Option<Bias>> {
+ Bias::new(unsafe { gpiod::gpiod_line_config_get_bias_offset(self.config, offset) } as u32)
+ }
+
+ /// Set the default drive setting.
+ fn set_drive_default(&mut self, drive: Drive) {
+ unsafe {
+ gpiod::gpiod_line_config_set_drive_default(self.config, drive.gpiod_drive() as i32)
+ }
+ }
+
+ /// Set the drive for a single line.
+ fn set_drive_override(&mut self, drive: Drive, offset: Offset) {
+ unsafe {
+ gpiod::gpiod_line_config_set_drive_override(
+ self.config,
+ drive.gpiod_drive() as i32,
+ offset,
+ )
+ }
+ }
+
+ /// clear the drive for a single line.
+ fn clear_drive_override(&mut self, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_clear_drive_override(self.config, offset) }
+ }
+
+ /// Check if the drive is overridden for a line.
+ fn drive_is_overridden(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_drive_is_overridden(self.config, offset) }
+ }
+
+ /// Get the default drive setting.
+ fn drive_default(&self) -> Result<Drive> {
+ Drive::new(unsafe { gpiod::gpiod_line_config_get_drive_default(self.config) } as u32)
+ }
+
+ /// Get the drive setting for a given line.
+ ///
+ /// The offset of the line for which to read the drive setting. Drive setting for the line if
+ /// the config object were used in a request.
+ fn drive_offset(&self, offset: Offset) -> Result<Drive> {
+ Drive::new(unsafe { gpiod::gpiod_line_config_get_drive_offset(self.config, offset) } as u32)
+ }
+
+ /// Set default active-low setting.
+ fn set_active_low_default(&mut self, active_low: bool) {
+ unsafe { gpiod::gpiod_line_config_set_active_low_default(self.config, active_low) }
+ }
+
+ /// Set active-low setting for a single line.
+ fn set_active_low_override(&mut self, active_low: bool, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_set_active_low_override(self.config, active_low, offset) }
+ }
+
+ /// Clear a single line's active-low setting.
+ fn clear_active_low_override(&mut self, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_clear_active_low_override(self.config, offset) }
+ }
+
+ /// Check if the active-low is overridden for a line.
+ fn active_low_is_overridden(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_active_low_is_overridden(self.config, offset) }
+ }
+
+ /// Check the default active-low setting.
+ fn active_low_default(&self) -> bool {
+ unsafe { gpiod::gpiod_line_config_get_active_low_default(self.config) }
+ }
+
+ /// Check the active-low setting of a line.
+ ///
+ /// Active-low setting for the line if the config object were used in a request.
+ fn active_low_offset(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_get_active_low_offset(self.config, offset) }
+ }
+
+ /// Set the default debounce period setting.
+ fn set_debounce_period_default(&mut self, period: Duration) {
+ unsafe {
+ gpiod::gpiod_line_config_set_debounce_period_us_default(
+ self.config,
+ period.as_micros() as u64,
+ )
+ }
+ }
+
+ /// Set the debounce period for a single line.
+ fn set_debounce_period_override(&mut self, period: Duration, offset: Offset) {
+ unsafe {
+ gpiod::gpiod_line_config_set_debounce_period_us_override(
+ self.config,
+ period.as_micros() as u64,
+ offset,
+ )
+ }
+ }
+
+ /// Clear the debounce period for a single line.
+ fn clear_debounce_period_override(&mut self, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_clear_debounce_period_us_override(self.config, offset) }
+ }
+
+ /// Check if the debounce period setting is overridden.
+ fn debounce_period_is_overridden(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_debounce_period_us_is_overridden(self.config, offset) }
+ }
+
+ /// Get the default debounce period.
+ fn debounce_period_default(&self) -> Result<Duration> {
+ Ok(Duration::from_micros(unsafe {
+ gpiod::gpiod_line_config_get_debounce_period_us_default(self.config)
+ }))
+ }
+
+ /// Get the debounce period for a given line.
+ ///
+ /// Debounce period for the line if the config object were used in a request, 0 if debouncing
+ /// is disabled.
+ fn debounce_period_offset(&self, offset: Offset) -> Result<Duration> {
+ Ok(Duration::from_micros(unsafe {
+ gpiod::gpiod_line_config_get_debounce_period_us_offset(self.config, offset)
+ }))
+ }
+
+ /// Set the default event clock setting.
+ fn set_event_clock_default(&mut self, clock: EventClock) {
+ unsafe {
+ gpiod::gpiod_line_config_set_event_clock_default(
+ self.config,
+ clock.gpiod_clock() as i32,
+ )
+ }
+ }
+
+ /// Set the event clock for a single line.
+ fn set_event_clock_override(&mut self, clock: EventClock, offset: Offset) {
+ unsafe {
+ gpiod::gpiod_line_config_set_event_clock_override(
+ self.config,
+ clock.gpiod_clock() as i32,
+ offset,
+ )
+ }
+ }
+
+ /// Clear the event clock for a single line.
+ fn clear_event_clock_override(&mut self, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_clear_event_clock_override(self.config, offset) }
+ }
+
+ /// Check if the event clock is overridden for a line.
+ fn event_clock_is_overridden(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_event_clock_is_overridden(self.config, offset) }
+ }
+
+ /// Get the default event clock setting.
+ fn event_clock_default(&self) -> Result<EventClock> {
+ EventClock::new(
+ unsafe { gpiod::gpiod_line_config_get_event_clock_default(self.config) } as u32,
+ )
+ }
+
+ /// Get the event clock setting for a given line.
+ ///
+ /// Event clock setting for the line if the config object were used in a request.
+ fn event_clock_offset(&self, offset: Offset) -> Result<EventClock> {
+ EventClock::new(unsafe {
+ gpiod::gpiod_line_config_get_event_clock_offset(self.config, offset)
+ } as u32)
+ }
+
+ /// Set the default output value setting.
+ fn set_output_value_default(&mut self, value: Value) {
+ unsafe { gpiod::gpiod_line_config_set_output_value_default(self.config, value.value()) }
+ }
+
+ /// Set the output value for a line.
+ fn set_output_value_override(&mut self, value: Value, offset: Offset) {
+ unsafe {
+ gpiod::gpiod_line_config_set_output_value_override(self.config, value.value(), offset)
+ }
+ }
+
+ /// Set the output values for a set of lines.
+ pub fn set_output_values(&mut self, map: ValueMap) -> Result<()> {
+ let mut offsets = Vec::new();
+ let mut values = Vec::new();
+
+ for (offset, value) in map {
+ offsets.push(offset as u32);
+ values.push(value.value());
+ }
+
+ unsafe {
+ gpiod::gpiod_line_config_set_output_values(
+ self.config,
+ values.len() as c_ulong,
+ offsets.as_ptr(),
+ values.as_ptr(),
+ );
+ }
+
+ Ok(())
+ }
+
+ /// Clear the output value for a line.
+ fn clear_output_value_override(&mut self, offset: Offset) {
+ unsafe { gpiod::gpiod_line_config_clear_output_value_override(self.config, offset) }
+ }
+
+ /// Check if the output value is overridden for a line.
+ fn output_value_is_overridden(&self, offset: Offset) -> bool {
+ unsafe { gpiod::gpiod_line_config_output_value_is_overridden(self.config, offset) }
+ }
+
+ /// Get the default output value, 0 or 1.
+ fn output_value_default(&self) -> Result<Value> {
+ let value = unsafe { gpiod::gpiod_line_config_get_output_value_default(self.config) };
+
+ if value != 0 && value != 1 {
+ Err(Error::OperationFailed(
+ OperationType::LineConfigGetOutValDefault,
+ Errno::last(),
+ ))
+ } else {
+ Value::new(value)
+ }
+ }
+
+ /// Get the output value configured for a given line, 0 or 1.
+ fn output_value_offset(&self, offset: Offset) -> Result<Value> {
+ let value =
+ unsafe { gpiod::gpiod_line_config_get_output_value_offset(self.config, offset) };
+
+ if value != 0 && value != 1 {
+ Err(Error::OperationFailed(
+ OperationType::LineConfigGetOutValOffset,
+ Errno::last(),
+ ))
+ } else {
+ Value::new(value)
+ }
+ }
+
+ /// Get the list of overridden offsets and the corresponding types of overridden settings.
+ pub fn overrides(&self) -> Result<Vec<(u32, SettingKind)>> {
+ let num = unsafe { gpiod::gpiod_line_config_get_num_overrides(self.config) } as usize;
+ if num == 0 {
+ return Ok(Vec::new());
+ }
+
+ let mut overrides = Vec::new();
+ let mut offset: Vec<Offset> = vec![0; num];
+ let mut props = vec![0_i32; num];
+
+ unsafe {
+ gpiod::gpiod_line_config_get_overrides(
+ self.config,
+ offset.as_mut_ptr(),
+ props.as_mut_ptr(),
+ )
+ };
+
+ for i in 0..num {
+ overrides.push((offset[i], SettingKind::new(props[i] as u32)?));
+ }
+
+ Ok(overrides)
+ }
+}
+
+impl Drop for Config {
+ /// Free the line config object and release all associated resources.
+ fn drop(&mut self) {
+ unsafe { gpiod::gpiod_line_config_free(self.config) }
+ }
+}
diff --git a/bindings/rust/libgpiod/src/line_info.rs b/bindings/rust/libgpiod/src/line_info.rs
new file mode 100644
index 000000000000..9db51fc30efd
--- /dev/null
+++ b/bindings/rust/libgpiod/src/line_info.rs
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use libc::strlen;
+use std::sync::Arc;
+use std::time::Duration;
+use std::{slice, str};
+
+use vmm_sys_util::errno::Error as Errno;
+
+use super::{
+ chip, gpiod, info, Bias, Direction, Drive, Edge, Error, EventClock, Offset, OperationType,
+ Result,
+};
+
+/// Line info
+///
+/// Exposes functions for retrieving kernel information about both requested and
+/// free lines. Line info object contains an immutable snapshot of a line's status.
+///
+/// The line info contains all the publicly available information about a
+/// line, which does not include the line value. The line must be requested
+/// to access the line value.
+
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct Info {
+ info: *mut gpiod::gpiod_line_info,
+ info_event: bool,
+}
+
+impl Info {
+ /// Get a snapshot of information about the line and optionally start watching it for changes.
+ pub(crate) fn new(ichip: Arc<chip::Internal>, offset: Offset) -> Result<Self> {
+ let info = unsafe { gpiod::gpiod_chip_get_line_info(ichip.chip(), offset) };
+
+ if info.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::ChipGetLineInfo,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self {
+ info,
+ info_event: false,
+ })
+ }
+
+ pub(crate) fn new_watch(ichip: Arc<chip::Internal>, offset: Offset) -> Result<Self> {
+ let info = unsafe { gpiod::gpiod_chip_watch_line_info(ichip.chip(), offset) };
+
+ if info.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::ChipWatchLineInfo,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self {
+ info,
+ info_event: false,
+ })
+ }
+
+ /// Get the Line info object associated with an event.
+ pub(crate) fn new_from_event(event: &info::Event) -> Result<Self> {
+ let info = unsafe { gpiod::gpiod_info_event_get_line_info(event.event()) };
+
+ if info.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::InfoEventGetLineInfo,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self {
+ info,
+ info_event: true,
+ })
+ }
+
+ /// Get the offset of the line within the GPIO chip.
+ ///
+ /// The offset uniquely identifies the line on the chip. The combination of the chip and offset
+ /// uniquely identifies the line within the system.
+
+ pub fn offset(&self) -> Offset {
+ unsafe { gpiod::gpiod_line_info_get_offset(self.info) }
+ }
+
+ /// Get GPIO line's name.
+ pub fn name(&self) -> Result<&str> {
+ // SAFETY: The string returned by libgpiod is guaranteed to live as long
+ // as the `struct Info`.
+ let name = unsafe { gpiod::gpiod_line_info_get_name(self.info) };
+ if name.is_null() {
+ return Err(Error::NullString("GPIO line's name"));
+ }
+
+ // SAFETY: The string is guaranteed to be valid here by the C API.
+ str::from_utf8(unsafe { slice::from_raw_parts(name as *const u8, strlen(name) as usize) })
+ .map_err(Error::StringNotUtf8)
+ }
+
+ /// Returns True if the line is in use, false otherwise.
+ ///
+ /// The user space can't know exactly why a line is busy. It may have been
+ /// requested by another process or hogged by the kernel. It only matters that
+ /// the line is used and we can't request it.
+ pub fn is_used(&self) -> bool {
+ unsafe { gpiod::gpiod_line_info_is_used(self.info) }
+ }
+
+ /// Get the GPIO line's consumer name.
+ pub fn consumer(&self) -> Result<&str> {
+ // SAFETY: The string returned by libgpiod is guaranteed to live as long
+ // as the `struct Info`.
+ let name = unsafe { gpiod::gpiod_line_info_get_consumer(self.info) };
+ if name.is_null() {
+ return Err(Error::NullString("GPIO line's consumer name"));
+ }
+
+ // SAFETY: The string is guaranteed to be valid here by the C API.
+ str::from_utf8(unsafe { slice::from_raw_parts(name as *const u8, strlen(name) as usize) })
+ .map_err(Error::StringNotUtf8)
+ }
+
+ /// Get the GPIO line's direction.
+ pub fn direction(&self) -> Result<Direction> {
+ Direction::new(unsafe { gpiod::gpiod_line_info_get_direction(self.info) } as u32)
+ }
+
+ /// Returns true if the line is "active-low", false otherwise.
+ pub fn is_active_low(&self) -> bool {
+ unsafe { gpiod::gpiod_line_info_is_active_low(self.info) }
+ }
+
+ /// Get the GPIO line's bias setting.
+ pub fn bias(&self) -> Result<Option<Bias>> {
+ Bias::new(unsafe { gpiod::gpiod_line_info_get_bias(self.info) } as u32)
+ }
+
+ /// Get the GPIO line's drive setting.
+ pub fn drive(&self) -> Result<Drive> {
+ Drive::new(unsafe { gpiod::gpiod_line_info_get_drive(self.info) } as u32)
+ }
+
+ /// Get the current edge detection setting of the line.
+ pub fn edge_detection(&self) -> Result<Option<Edge>> {
+ Edge::new(unsafe { gpiod::gpiod_line_info_get_edge_detection(self.info) } as u32)
+ }
+
+ /// Get the current event clock setting used for edge event timestamps.
+ pub fn event_clock(&self) -> Result<EventClock> {
+ EventClock::new(unsafe { gpiod::gpiod_line_info_get_event_clock(self.info) } as u32)
+ }
+
+ /// Returns true if the line is debounced (either by hardware or by the
+ /// kernel software debouncer), false otherwise.
+ pub fn is_debounced(&self) -> bool {
+ unsafe { gpiod::gpiod_line_info_is_debounced(self.info) }
+ }
+
+ /// Get the debounce period of the line.
+ pub fn debounce_period(&self) -> Duration {
+ Duration::from_micros(unsafe { gpiod::gpiod_line_info_get_debounce_period_us(self.info) })
+ }
+}
+
+impl Drop for Info {
+ fn drop(&mut self) {
+ // We must not free the Line info object created from `struct info::Event` by calling
+ // libgpiod API.
+ if !self.info_event {
+ unsafe { gpiod::gpiod_line_info_free(self.info) }
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/src/line_request.rs b/bindings/rust/libgpiod/src/line_request.rs
new file mode 100644
index 000000000000..617efaa34d58
--- /dev/null
+++ b/bindings/rust/libgpiod/src/line_request.rs
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use libc::EINVAL;
+use std::os::raw::c_ulong;
+use std::sync::Arc;
+use std::time::Duration;
+
+use vmm_sys_util::errno::Error as Errno;
+
+use super::{
+ chip, edge, gpiod, line, request, Error, Offset, OperationType, Result, Value, ValueMap,
+};
+
+/// Line request operations
+///
+/// Allows interaction with a set of requested lines.
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct Request {
+ request: *mut gpiod::gpiod_line_request,
+}
+
+impl Request {
+ /// Request a set of lines for exclusive usage.
+ pub(crate) fn new(
+ ichip: &Arc<chip::Internal>,
+ rconfig: &request::Config,
+ lconfig: &line::Config,
+ ) -> Result<Self> {
+ let request = unsafe {
+ gpiod::gpiod_chip_request_lines(ichip.chip(), rconfig.config(), lconfig.config())
+ };
+
+ if request.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::LineRequest,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { request })
+ }
+
+ /// Get the number of lines in the request.
+ pub fn num_lines(&self) -> usize {
+ unsafe { gpiod::gpiod_line_request_get_num_lines(self.request) as usize }
+ }
+
+ /// Get the offsets of lines in the request.
+ pub fn offsets(&self) -> Vec<Offset> {
+ let mut offsets = vec![0; self.num_lines() as usize];
+
+ unsafe { gpiod::gpiod_line_request_get_offsets(self.request, offsets.as_mut_ptr()) };
+ offsets
+ }
+
+ /// Get the value (0 or 1) of a single line associated with the request.
+ pub fn value(&self, offset: Offset) -> Result<Value> {
+ let value = unsafe { gpiod::gpiod_line_request_get_value(self.request, offset) };
+
+ if value != 0 && value != 1 {
+ Err(Error::OperationFailed(
+ OperationType::LineRequestGetVal,
+ Errno::last(),
+ ))
+ } else {
+ Value::new(value)
+ }
+ }
+
+ /// Get values of a subset of lines associated with the request.
+ pub fn values_subset(&self, offsets: &[Offset]) -> Result<ValueMap> {
+ let mut values = vec![0; offsets.len()];
+
+ let ret = unsafe {
+ gpiod::gpiod_line_request_get_values_subset(
+ self.request,
+ offsets.len() as c_ulong,
+ offsets.as_ptr(),
+ values.as_mut_ptr(),
+ )
+ };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::LineRequestGetValSubset,
+ Errno::last(),
+ ))
+ } else {
+ let mut map = ValueMap::new();
+
+ for (i, val) in values.iter().enumerate() {
+ map.insert(offsets[i].into(), Value::new(*val)?);
+ }
+
+ Ok(map)
+ }
+ }
+
+ /// Get values of all lines associated with the request.
+ pub fn values(&self) -> Result<ValueMap> {
+ self.values_subset(&self.offsets())
+ }
+
+ /// Set the value of a single line associated with the request.
+ pub fn set_value(&self, offset: Offset, value: Value) -> Result<()> {
+ let ret =
+ unsafe { gpiod::gpiod_line_request_set_value(self.request, offset, value.value()) };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::LineRequestSetVal,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ /// Get values of a subset of lines associated with the request.
+ pub fn set_values_subset(&self, map: ValueMap) -> Result<()> {
+ let mut offsets = Vec::new();
+ let mut values = Vec::new();
+
+ for (offset, value) in map {
+ offsets.push(offset as u32);
+ values.push(value.value());
+ }
+
+ let ret = unsafe {
+ gpiod::gpiod_line_request_set_values_subset(
+ self.request,
+ offsets.len() as c_ulong,
+ offsets.as_ptr(),
+ values.as_ptr(),
+ )
+ };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::LineRequestSetValSubset,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ /// Get values of all lines associated with the request.
+ pub fn set_values(&self, values: &[Value]) -> Result<()> {
+ if values.len() != self.num_lines() as usize {
+ return Err(Error::OperationFailed(
+ OperationType::LineRequestSetVal,
+ Errno::new(EINVAL),
+ ));
+ }
+
+ let mut new_values = Vec::new();
+ for value in values {
+ new_values.push(value.value());
+ }
+
+ let ret =
+ unsafe { gpiod::gpiod_line_request_set_values(self.request, new_values.as_ptr()) };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::LineRequestSetVal,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ /// Update the configuration of lines associated with the line request.
+ pub fn reconfigure_lines(&self, lconfig: &line::Config) -> Result<()> {
+ let ret =
+ unsafe { gpiod::gpiod_line_request_reconfigure_lines(self.request, lconfig.config()) };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::LineRequestReconfigLines,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ /// Get the file descriptor associated with the line request.
+ pub fn fd(&self) -> u32 {
+ unsafe { gpiod::gpiod_line_request_get_fd(self.request) as u32 }
+ }
+
+ /// Wait for edge events on any of the lines associated with the request.
+ pub fn wait_edge_event(&self, timeout: Option<Duration>) -> Result<bool> {
+ let timeout = match timeout {
+ Some(x) => x.as_nanos() as i64,
+ // Block indefinitely
+ None => -1,
+ };
+
+ let ret = unsafe { gpiod::gpiod_line_request_wait_edge_event(self.request, timeout) };
+
+ match ret {
+ -1 => Err(Error::OperationFailed(
+ OperationType::LineRequestWaitEdgeEvent,
+ Errno::last(),
+ )),
+ 0 => Ok(false),
+ _ => Ok(true),
+ }
+ }
+
+ /// Get a number of edge events from a line request.
+ ///
+ /// This function will block if no event was queued for the line.
+ pub fn read_edge_events(&self, buffer: &edge::event::Buffer) -> Result<u32> {
+ let ret = unsafe {
+ gpiod::gpiod_line_request_read_edge_event(
+ self.request,
+ buffer.buffer(),
+ buffer.capacity() as u64,
+ )
+ };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::LineRequestReadEdgeEvent,
+ Errno::last(),
+ ))
+ } else {
+ Ok(ret as u32)
+ }
+ }
+}
+
+impl Drop for Request {
+ /// Release the requested lines and free all associated resources.
+ fn drop(&mut self) {
+ unsafe { gpiod::gpiod_line_request_release(self.request) }
+ }
+}
diff --git a/bindings/rust/libgpiod/src/request_config.rs b/bindings/rust/libgpiod/src/request_config.rs
new file mode 100644
index 000000000000..36a78b8da8d5
--- /dev/null
+++ b/bindings/rust/libgpiod/src/request_config.rs
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use libc::strlen;
+use std::os::raw::{c_char, c_ulong};
+use std::{slice, str};
+
+use vmm_sys_util::errno::Error as Errno;
+
+use super::{gpiod, Error, Offset, OperationType, Result};
+
+/// Request configuration objects
+///
+/// Request config objects are used to pass a set of options to the kernel at
+/// the time of the line request. Similarly to the line-config - the mutators
+/// don't return error values. If the values are invalid, in general they are
+/// silently adjusted to acceptable ranges.
+
+#[derive(Clone, Debug, Eq, PartialEq)]
+pub struct Config {
+ config: *mut gpiod::gpiod_request_config,
+}
+
+impl Config {
+ /// Create a new request config object.
+ pub fn new() -> Result<Self> {
+ let config = unsafe { gpiod::gpiod_request_config_new() };
+ if config.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::RequestConfigNew,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { config })
+ }
+
+ /// Private helper, Returns gpiod_request_config
+ pub(crate) fn config(&self) -> *mut gpiod::gpiod_request_config {
+ self.config
+ }
+
+ /// Set the consumer name for the request.
+ ///
+ /// If the consumer string is too long, it will be truncated to the max
+ /// accepted length.
+ pub fn set_consumer(&self, consumer: &str) {
+ // Null-terminate the string
+ let consumer = consumer.to_owned() + "\0";
+
+ unsafe {
+ gpiod::gpiod_request_config_set_consumer(
+ self.config,
+ consumer.as_ptr() as *const c_char,
+ )
+ }
+ }
+
+ /// Get the consumer name configured in the request config.
+ pub fn consumer(&self) -> Result<&str> {
+ // SAFETY: The string returned by libgpiod is guaranteed to live as long
+ // as the `struct Config`.
+ let consumer = unsafe { gpiod::gpiod_request_config_get_consumer(self.config) };
+ if consumer.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::RequestConfigGetConsumer,
+ Errno::last(),
+ ));
+ }
+
+ // SAFETY: The string is guaranteed to be valid here by the C API.
+ str::from_utf8(unsafe {
+ slice::from_raw_parts(consumer as *const u8, strlen(consumer) as usize)
+ })
+ .map_err(Error::StringNotUtf8)
+ }
+
+ /// Set the offsets of the lines to be requested.
+ ///
+ /// If too many offsets were specified, the offsets above the limit accepted
+ /// by the kernel (64 lines) are silently dropped.
+ pub fn set_offsets(&self, offsets: &[Offset]) {
+ unsafe {
+ gpiod::gpiod_request_config_set_offsets(
+ self.config,
+ offsets.len() as c_ulong,
+ offsets.as_ptr(),
+ )
+ }
+ }
+
+ /// Get the offsets of lines in the request config.
+ pub fn offsets(&self) -> Vec<Offset> {
+ let num = unsafe { gpiod::gpiod_request_config_get_num_offsets(self.config) };
+ let mut offsets = vec![0; num as usize];
+
+ unsafe { gpiod::gpiod_request_config_get_offsets(self.config, offsets.as_mut_ptr()) };
+ offsets
+ }
+
+ /// Set the size of the kernel event buffer for the request.
+ pub fn set_event_buffer_size(&self, size: usize) {
+ unsafe { gpiod::gpiod_request_config_set_event_buffer_size(self.config, size as c_ulong) }
+ }
+
+ /// Get the edge event buffer size setting for the request config.
+ pub fn event_buffer_size(&self) -> usize {
+ unsafe { gpiod::gpiod_request_config_get_event_buffer_size(self.config) as usize }
+ }
+}
+
+impl Drop for Config {
+ /// Free the request config object and release all associated resources.
+ fn drop(&mut self) {
+ unsafe { gpiod::gpiod_request_config_free(self.config) }
+ }
+}
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH V5 4/8] libgpiod: Add rust examples
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
` (2 preceding siblings ...)
2022-08-02 12:18 ` [PATCH V5 3/8] libgpiod: Add rust wrapper crate Viresh Kumar
@ 2022-08-02 12:18 ` Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 5/8] libgpiod: Add gpiosim rust crate Viresh Kumar
` (4 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
Add examples for the usage of the rust bindings, quite similar to the
ones in cxx bindings.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
bindings/rust/libgpiod/examples/gpiodetect.rs | 30 ++++++
bindings/rust/libgpiod/examples/gpiofind.rs | 35 +++++++
bindings/rust/libgpiod/examples/gpioget.rs | 44 +++++++++
bindings/rust/libgpiod/examples/gpioinfo.rs | 95 +++++++++++++++++++
bindings/rust/libgpiod/examples/gpiomon.rs | 71 ++++++++++++++
bindings/rust/libgpiod/examples/gpioset.rs | 64 +++++++++++++
bindings/rust/libgpiod/examples/gpiowatch.rs | 54 +++++++++++
7 files changed, 393 insertions(+)
create mode 100644 bindings/rust/libgpiod/examples/gpiodetect.rs
create mode 100644 bindings/rust/libgpiod/examples/gpiofind.rs
create mode 100644 bindings/rust/libgpiod/examples/gpioget.rs
create mode 100644 bindings/rust/libgpiod/examples/gpioinfo.rs
create mode 100644 bindings/rust/libgpiod/examples/gpiomon.rs
create mode 100644 bindings/rust/libgpiod/examples/gpioset.rs
create mode 100644 bindings/rust/libgpiod/examples/gpiowatch.rs
diff --git a/bindings/rust/libgpiod/examples/gpiodetect.rs b/bindings/rust/libgpiod/examples/gpiodetect.rs
new file mode 100644
index 000000000000..f24ac72e2d48
--- /dev/null
+++ b/bindings/rust/libgpiod/examples/gpiodetect.rs
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+//
+// Simplified Rust implementation of gpiodetect tool.
+
+use std::env;
+use std::path::Path;
+
+use libgpiod::{gpiochip_devices, Error, Result};
+
+fn main() -> Result<()> {
+ let args: Vec<String> = env::args().collect();
+ if args.len() > 1 {
+ println!("Usage: {}", args[0]);
+ return Err(Error::InvalidArguments);
+ }
+
+ for chip in gpiochip_devices(&Path::new("/dev"))? {
+ println!(
+ "{} [{}] ({})",
+ chip.name()?,
+ chip.label()?,
+ chip.num_lines(),
+ );
+ }
+
+ Ok(())
+}
diff --git a/bindings/rust/libgpiod/examples/gpiofind.rs b/bindings/rust/libgpiod/examples/gpiofind.rs
new file mode 100644
index 000000000000..07e886bc3896
--- /dev/null
+++ b/bindings/rust/libgpiod/examples/gpiofind.rs
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+//
+// Simplified Rust implementation of gpiofind tool.
+
+use std::env;
+use std::path::Path;
+
+use libgpiod::{gpiochip_devices, Error, Result};
+
+fn main() -> Result<()> {
+ let args: Vec<String> = env::args().collect();
+ if args.len() != 2 {
+ println!("Usage: {} <line-name>", args[0]);
+ return Err(Error::InvalidArguments);
+ }
+
+ for chip in gpiochip_devices(&Path::new("/dev"))? {
+ let offset = chip.line_offset_from_name(&args[1]);
+ if offset.is_ok() {
+ println!(
+ "Line {} found: Chip: {}, offset: {}",
+ args[1],
+ chip.name()?,
+ offset?
+ );
+ return Ok(());
+ }
+ }
+
+ println!("Failed to find line: {}", args[1]);
+ Ok(())
+}
diff --git a/bindings/rust/libgpiod/examples/gpioget.rs b/bindings/rust/libgpiod/examples/gpioget.rs
new file mode 100644
index 000000000000..7dccde3debed
--- /dev/null
+++ b/bindings/rust/libgpiod/examples/gpioget.rs
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+//
+// Simplified Rust implementation of gpioget tool.
+
+use std::env;
+
+use libgpiod::{chip::Chip, line, request, Direction, Error, Offset, Result, Setting, SettingMap};
+
+fn main() -> Result<()> {
+ let args: Vec<String> = env::args().collect();
+ if args.len() < 3 {
+ println!("Usage: {} <chip> <line_offset0> ...", args[0]);
+ return Err(Error::InvalidArguments);
+ }
+
+ let mut config = line::Config::new()?;
+ let mut offsets = Vec::<Offset>::new();
+ let mut map = SettingMap::new();
+
+ for arg in &args[2..] {
+ let offset = arg.parse::<Offset>().map_err(|_| Error::InvalidArguments)?;
+
+ offsets.push(offset);
+ map.insert(offset.into(), Setting::Direction(Direction::Input));
+ }
+
+ config.set_prop_override(map);
+
+ let path = format!("/dev/gpiochip{}", args[1]);
+ let chip = Chip::open(&path)?;
+
+ let rconfig = request::Config::new()?;
+ rconfig.set_consumer(&args[0]);
+ rconfig.set_offsets(&offsets);
+
+ let request = chip.request_lines(&rconfig, &config)?;
+ let map = request.values()?;
+
+ println!("{:?}", map);
+ Ok(())
+}
diff --git a/bindings/rust/libgpiod/examples/gpioinfo.rs b/bindings/rust/libgpiod/examples/gpioinfo.rs
new file mode 100644
index 000000000000..8b9fcb000f63
--- /dev/null
+++ b/bindings/rust/libgpiod/examples/gpioinfo.rs
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+//
+// Simplified Rust implementation of gpioinfo tool.
+
+use std::env;
+use std::path::Path;
+
+use libgpiod::{
+ chip::Chip, gpiochip_devices, is_gpiochip_device, Direction, Error, Offset, Result,
+};
+
+fn line_info(chip: &Chip, offset: Offset) -> Result<()> {
+ let info = chip.line_info(offset)?;
+ let off = info.offset();
+
+ let name = match info.name() {
+ Ok(name) => name,
+ _ => "unused",
+ };
+
+ let consumer = match info.consumer() {
+ Ok(name) => name,
+ _ => "unnamed",
+ };
+
+ let low = if info.is_active_low() {
+ "active-low"
+ } else {
+ "active-high"
+ };
+
+ let dir = match info.direction()? {
+ Direction::AsIs => "None",
+ Direction::Input => "Input",
+ Direction::Output => "Output",
+ };
+
+ println!(
+ "\tline {:>3}\
+ \t{:>10}\
+ \t{:>10}\
+ \t{:>6}\
+ \t{:>14}",
+ off, name, consumer, dir, low
+ );
+
+ Ok(())
+}
+
+fn chip_info(chip: &Chip) -> Result<()> {
+ let ngpio = chip.num_lines();
+
+ println!("GPIO Chip name: {}", chip.name()?);
+ println!("\tlabel: {}", chip.label()?);
+ println!("\tpath: {}", chip.path()?);
+ println!("\tngpio: {}\n", ngpio);
+
+ println!("\tLine information:");
+
+ for offset in 0..ngpio {
+ line_info(chip, offset as Offset)?;
+ }
+ println!("\n");
+
+ Ok(())
+}
+
+fn main() -> Result<()> {
+ let args: Vec<String> = env::args().collect();
+ if args.len() > 2 {
+ println!("Usage: {}", args[0]);
+ return Err(Error::InvalidArguments);
+ }
+
+ if args.len() == 1 {
+ for chip in gpiochip_devices(&Path::new("/dev"))? {
+ chip_info(&chip)?;
+ }
+ } else {
+ let index = args[1]
+ .parse::<u32>()
+ .map_err(|_| Error::InvalidArguments)?;
+ let path = format!("/dev/gpiochip{}", index);
+ if is_gpiochip_device(&path) {
+ let chip = Chip::open(&path)?;
+
+ chip_info(&chip)?;
+ }
+ }
+
+ Ok(())
+}
diff --git a/bindings/rust/libgpiod/examples/gpiomon.rs b/bindings/rust/libgpiod/examples/gpiomon.rs
new file mode 100644
index 000000000000..f2a52663b8ea
--- /dev/null
+++ b/bindings/rust/libgpiod/examples/gpiomon.rs
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+//
+// Simplified Rust implementation of the gpiomon tool.
+
+use std::env;
+
+use libgpiod::{chip::Chip, edge, line, request, Edge, EdgeKind, Error, Offset, Result, Setting};
+
+fn usage(name: &str) {
+ println!("Usage: {} <chip> <offset0> ...", name);
+}
+
+fn main() -> Result<()> {
+ let args: Vec<String> = env::args().collect();
+ if args.len() < 3 {
+ usage(&args[0]);
+ return Err(Error::InvalidArguments);
+ }
+
+ let mut config = line::Config::new()?;
+ let mut offsets = Vec::<Offset>::new();
+
+ for arg in &args[2..] {
+ let offset = arg.parse::<Offset>().map_err(|_| Error::InvalidArguments)?;
+
+ offsets.push(offset);
+ }
+
+ config.set_prop_default(&[Setting::EdgeDetection(Some(Edge::Both))]);
+
+ let path = format!("/dev/gpiochip{}", args[1]);
+ let chip = Chip::open(&path)?;
+
+ let rconfig = request::Config::new()?;
+ rconfig.set_offsets(&offsets);
+
+ let buffer = edge::event::Buffer::new(1)?;
+ let request = chip.request_lines(&rconfig, &config)?;
+
+ loop {
+ match request.wait_edge_event(None) {
+ Err(x) => {
+ println!("{:?}", x);
+ return Err(Error::InvalidArguments);
+ }
+
+ Ok(false) => {
+ // This shouldn't happen as the call is blocking.
+ panic!();
+ }
+ Ok(true) => (),
+ }
+
+ let count = request.read_edge_events(&buffer)?;
+ if count == 1 {
+ let event = buffer.event(0)?;
+ println!(
+ "line: {} type: {}, time: {:?}",
+ event.line_offset(),
+ match event.event_type()? {
+ EdgeKind::Rising => "Rising",
+ EdgeKind::Falling => "Falling",
+ },
+ event.timestamp()
+ );
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/examples/gpioset.rs b/bindings/rust/libgpiod/examples/gpioset.rs
new file mode 100644
index 000000000000..b92d8bcd39c5
--- /dev/null
+++ b/bindings/rust/libgpiod/examples/gpioset.rs
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+//
+// Simplified Rust implementation of the gpioset tool.
+
+use std::env;
+use std::io::{stdin, Read};
+
+use libgpiod::{
+ chip::Chip, line, request, Direction, Error, Offset, Result, Setting, Value, ValueMap,
+};
+
+fn usage(name: &str) {
+ println!("Usage: {} <chip> <line_offset0>=<value0> ...", name);
+}
+
+fn main() -> Result<()> {
+ let args: Vec<String> = env::args().collect();
+ if args.len() < 3 {
+ usage(&args[0]);
+ return Err(Error::InvalidArguments);
+ }
+
+ let mut config = line::Config::new()?;
+ let mut offsets = Vec::<Offset>::new();
+ let mut map = ValueMap::new();
+
+ for arg in &args[2..] {
+ let pair: Vec<&str> = arg.split('=').collect();
+ if pair.len() != 2 {
+ usage(&args[0]);
+ return Err(Error::InvalidArguments);
+ }
+
+ let offset = pair[0]
+ .parse::<Offset>()
+ .map_err(|_| Error::InvalidArguments)?;
+ let value = pair[1]
+ .parse::<i32>()
+ .map_err(|_| Error::InvalidArguments)?;
+
+ offsets.push(offset);
+ map.insert(offset.into(), Value::new(value)?);
+ }
+
+ config.set_prop_default(&[Setting::Direction(Direction::Output)]);
+ config.set_output_values(map)?;
+
+ let path = format!("/dev/gpiochip{}", args[1]);
+ let chip = Chip::open(&path)?;
+
+ let rconfig = request::Config::new()?;
+ rconfig.set_consumer(&args[0]);
+ rconfig.set_offsets(&offsets);
+
+ chip.request_lines(&rconfig, &config)?;
+
+ // Wait for keypress, let user verify line status.
+ stdin().read_exact(&mut [0u8]).unwrap();
+
+ Ok(())
+}
diff --git a/bindings/rust/libgpiod/examples/gpiowatch.rs b/bindings/rust/libgpiod/examples/gpiowatch.rs
new file mode 100644
index 000000000000..030168ba9788
--- /dev/null
+++ b/bindings/rust/libgpiod/examples/gpiowatch.rs
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+//
+// Simplified Rust implementation of the gpiowatch tool.
+
+use std::env;
+
+use libgpiod::{chip::Chip, Error, Offset, Result};
+
+fn usage(name: &str) {
+ println!("Usage: {} <chip> <offset0> ...", name);
+}
+
+fn main() -> Result<()> {
+ let args: Vec<String> = env::args().collect();
+ if args.len() < 2 {
+ usage(&args[0]);
+ return Err(Error::InvalidArguments);
+ }
+
+ let path = format!("/dev/gpiochip{}", args[1]);
+ let offset = args[2]
+ .parse::<Offset>()
+ .map_err(|_| Error::InvalidArguments)?;
+
+ let chip = Chip::open(&path)?;
+ let _info = chip.watch_line_info(offset)?;
+
+ match chip.wait_info_event(None) {
+ Err(x) => {
+ println!("{:?}", x);
+ return Err(Error::InvalidArguments);
+ }
+
+ Ok(false) => {
+ // This shouldn't happen as the call is blocking.
+ panic!();
+ }
+ Ok(true) => (),
+ }
+
+ let event = chip.read_info_event()?;
+ println!(
+ "line: {} type: {:?}, time: {:?}",
+ offset,
+ event.event_type()?,
+ event.timestamp()
+ );
+
+ chip.unwatch(offset);
+ Ok(())
+}
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH V5 5/8] libgpiod: Add gpiosim rust crate
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
` (3 preceding siblings ...)
2022-08-02 12:18 ` [PATCH V5 4/8] libgpiod: Add rust examples Viresh Kumar
@ 2022-08-02 12:18 ` Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 6/8] gpiosim: Add pre generated rust bindings Viresh Kumar
` (3 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
This adds gpiosim rust crate, which provides helpers to emulate GPIO
chips.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
bindings/rust/Cargo.toml | 3 +-
bindings/rust/gpiosim/Cargo.toml | 18 ++
bindings/rust/gpiosim/build.rs | 43 ++++
bindings/rust/gpiosim/src/lib.rs | 25 +++
bindings/rust/gpiosim/src/sim.rs | 323 +++++++++++++++++++++++++++++++
5 files changed, 411 insertions(+), 1 deletion(-)
create mode 100644 bindings/rust/gpiosim/Cargo.toml
create mode 100644 bindings/rust/gpiosim/build.rs
create mode 100644 bindings/rust/gpiosim/src/lib.rs
create mode 100644 bindings/rust/gpiosim/src/sim.rs
diff --git a/bindings/rust/Cargo.toml b/bindings/rust/Cargo.toml
index 1e57ef2c0002..8721bc610b86 100644
--- a/bindings/rust/Cargo.toml
+++ b/bindings/rust/Cargo.toml
@@ -2,5 +2,6 @@
members = [
"libgpiod-sys",
- "libgpiod"
+ "libgpiod",
+ "gpiosim"
]
diff --git a/bindings/rust/gpiosim/Cargo.toml b/bindings/rust/gpiosim/Cargo.toml
new file mode 100644
index 000000000000..d6b4cc34339b
--- /dev/null
+++ b/bindings/rust/gpiosim/Cargo.toml
@@ -0,0 +1,18 @@
+[package]
+name = "gpiosim"
+version = "0.1.0"
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+libc = ">=0.2.39"
+libgpiod = { path = "../libgpiod" }
+vmm-sys-util = "=0.10.0"
+
+[features]
+generate = [ "bindgen" ]
+
+[build-dependencies]
+bindgen = { version = "0.59.1", optional = true }
+cc = "1.0.46"
diff --git a/bindings/rust/gpiosim/build.rs b/bindings/rust/gpiosim/build.rs
new file mode 100644
index 000000000000..460fb8c092c3
--- /dev/null
+++ b/bindings/rust/gpiosim/build.rs
@@ -0,0 +1,43 @@
+#[cfg(feature = "generate")]
+extern crate bindgen;
+#[cfg(feature = "generate")]
+use std::env;
+#[cfg(feature = "generate")]
+use std::path::PathBuf;
+
+#[cfg(feature = "generate")]
+fn generate_bindings() {
+ // Tell cargo to invalidate the built crate whenever following files change
+ println!("cargo:rerun-if-changed=../../../tests/gpiosim/gpiosim.h");
+
+ // The bindgen::Builder is the main entry point
+ // to bindgen, and lets you build up options for
+ // the resulting bindings.
+ let bindings = bindgen::Builder::default()
+ // The input header we would like to generate
+ // bindings for.
+ .header("../../../tests/gpiosim/gpiosim.h")
+ // Tell cargo to invalidate the built crate whenever any of the
+ // included header files changed.
+ .parse_callbacks(Box::new(bindgen::CargoCallbacks))
+ // Finish the builder and generate the bindings.
+ .generate()
+ // Unwrap the Result and panic on failure.
+ .expect("Unable to generate bindings");
+
+ // Write the bindings to the $OUT_DIR/bindings.rs file.
+ let out_path = PathBuf::from(env::var("OUT_DIR").unwrap());
+ bindings
+ .write_to_file(out_path.join("bindings.rs"))
+ .expect("Couldn't write bindings!");
+}
+
+fn main() {
+ #[cfg(feature = "generate")]
+ generate_bindings();
+
+ println!("cargo:rustc-link-lib=kmod");
+ println!("cargo:rustc-link-lib=mount");
+ println!("cargo:rustc-link-search=./../../tests/gpiosim/.libs/");
+ println!("cargo:rustc-link-lib=static=gpiosim");
+}
diff --git a/bindings/rust/gpiosim/src/lib.rs b/bindings/rust/gpiosim/src/lib.rs
new file mode 100644
index 000000000000..94d0ddb38e0f
--- /dev/null
+++ b/bindings/rust/gpiosim/src/lib.rs
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#[allow(non_camel_case_types, non_upper_case_globals)]
+#[cfg_attr(test, allow(deref_nullptr, non_snake_case))]
+#[allow(dead_code)]
+mod bindings_raw {
+ #[cfg(feature = "generate")]
+ include!(concat!(env!("OUT_DIR"), "/bindings.rs"));
+
+ #[cfg(not(feature = "generate"))]
+ include!("bindings.rs");
+}
+
+use bindings_raw::*;
+
+pub use bindings_raw::{
+ GPIOSIM_HOG_DIR_INPUT, GPIOSIM_HOG_DIR_OUTPUT_HIGH, GPIOSIM_HOG_DIR_OUTPUT_LOW,
+ GPIOSIM_PULL_DOWN, GPIOSIM_PULL_UP, GPIOSIM_VALUE_ACTIVE, GPIOSIM_VALUE_INACTIVE,
+};
+
+#[allow(dead_code)]
+mod sim;
+
+#[allow(unused_imports)]
+pub use sim::*;
diff --git a/bindings/rust/gpiosim/src/sim.rs b/bindings/rust/gpiosim/src/sim.rs
new file mode 100644
index 000000000000..50977ea54ebb
--- /dev/null
+++ b/bindings/rust/gpiosim/src/sim.rs
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use libc::strlen;
+use std::os::raw::c_char;
+use std::path::PathBuf;
+use std::{slice, str};
+
+use vmm_sys_util::errno::Error as Errno;
+
+use libgpiod::{Error, Offset, OperationType, Result};
+
+use crate::*;
+
+/// Sim Ctx
+#[derive(Debug)]
+struct SimCtx {
+ ctx: *mut gpiosim_ctx,
+}
+
+unsafe impl Send for SimCtx {}
+unsafe impl Sync for SimCtx {}
+
+impl SimCtx {
+ fn new() -> Result<Self> {
+ let ctx = unsafe { gpiosim_ctx_new() };
+ if ctx.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::SimCtxNew,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { ctx })
+ }
+
+ fn ctx(&self) -> *mut gpiosim_ctx {
+ self.ctx
+ }
+}
+
+impl Drop for SimCtx {
+ fn drop(&mut self) {
+ unsafe { gpiosim_ctx_unref(self.ctx) }
+ }
+}
+
+/// Sim Dev
+#[derive(Debug)]
+struct SimDev {
+ dev: *mut gpiosim_dev,
+}
+
+unsafe impl Send for SimDev {}
+unsafe impl Sync for SimDev {}
+
+impl SimDev {
+ fn new(ctx: &SimCtx) -> Result<Self> {
+ let dev = unsafe { gpiosim_dev_new(ctx.ctx()) };
+ if dev.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::SimDevNew,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { dev })
+ }
+
+ fn dev(&self) -> *mut gpiosim_dev {
+ self.dev
+ }
+
+ fn enable(&self) -> Result<()> {
+ let ret = unsafe { gpiosim_dev_enable(self.dev) };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::SimDevEnable,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ fn disable(&self) -> Result<()> {
+ let ret = unsafe { gpiosim_dev_disable(self.dev) };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::SimDevDisable,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+}
+
+impl Drop for SimDev {
+ fn drop(&mut self) {
+ unsafe { gpiosim_dev_unref(self.dev) }
+ }
+}
+
+/// Sim Bank
+#[derive(Debug)]
+struct SimBank {
+ bank: *mut gpiosim_bank,
+}
+
+unsafe impl Send for SimBank {}
+unsafe impl Sync for SimBank {}
+
+impl SimBank {
+ fn new(dev: &SimDev) -> Result<Self> {
+ let bank = unsafe { gpiosim_bank_new(dev.dev()) };
+ if bank.is_null() {
+ return Err(Error::OperationFailed(
+ OperationType::SimBankNew,
+ Errno::last(),
+ ));
+ }
+
+ Ok(Self { bank })
+ }
+
+ fn chip_name(&self) -> Result<&str> {
+ // SAFETY: The string returned by gpiosim is guaranteed to live as long
+ // as the `struct SimBank`.
+ let name = unsafe { gpiosim_bank_get_chip_name(self.bank) };
+
+ // SAFETY: The string is guaranteed to be valid here.
+ str::from_utf8(unsafe { slice::from_raw_parts(name as *const u8, strlen(name) as usize) })
+ .map_err(Error::StringNotUtf8)
+ }
+
+ fn dev_path(&self) -> Result<PathBuf> {
+ // SAFETY: The string returned by gpiosim is guaranteed to live as long
+ // as the `struct SimBank`.
+ let path = unsafe { gpiosim_bank_get_dev_path(self.bank) };
+
+ // SAFETY: The string is guaranteed to be valid here.
+ let path = str::from_utf8(unsafe {
+ slice::from_raw_parts(path as *const u8, strlen(path) as usize)
+ })
+ .map_err(Error::StringNotUtf8)?;
+
+ Ok(PathBuf::from(path))
+ }
+
+ fn val(&self, offset: Offset) -> Result<u32> {
+ let ret = unsafe { gpiosim_bank_get_value(self.bank, offset) };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::SimBankGetVal,
+ Errno::last(),
+ ))
+ } else {
+ Ok(ret as u32)
+ }
+ }
+
+ fn set_label(&self, label: &str) -> Result<()> {
+ // Null-terminate the string
+ let label = label.to_owned() + "\0";
+
+ let ret = unsafe { gpiosim_bank_set_label(self.bank, label.as_ptr() as *const c_char) };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::SimBankSetLabel,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ fn set_num_lines(&self, num: u64) -> Result<()> {
+ let ret = unsafe { gpiosim_bank_set_num_lines(self.bank, num) };
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::SimBankSetNumLines,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ fn set_line_name(&self, offset: Offset, name: &str) -> Result<()> {
+ // Null-terminate the string
+ let name = name.to_owned() + "\0";
+
+ let ret = unsafe {
+ gpiosim_bank_set_line_name(self.bank, offset, name.as_ptr() as *const c_char)
+ };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::SimBankSetLineName,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ fn set_pull(&self, offset: Offset, pull: i32) -> Result<()> {
+ let ret = unsafe { gpiosim_bank_set_pull(self.bank, offset, pull) };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::SimBankSetPull,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+
+ fn hog_line(&self, offset: Offset, name: &str, dir: i32) -> Result<()> {
+ // Null-terminate the string
+ let name = name.to_owned() + "\0";
+
+ let ret = unsafe {
+ gpiosim_bank_hog_line(self.bank, offset, name.as_ptr() as *const c_char, dir)
+ };
+
+ if ret == -1 {
+ Err(Error::OperationFailed(
+ OperationType::SimBankHogLine,
+ Errno::last(),
+ ))
+ } else {
+ Ok(())
+ }
+ }
+}
+
+impl Drop for SimBank {
+ fn drop(&mut self) {
+ unsafe { gpiosim_bank_unref(self.bank) }
+ }
+}
+
+/// GPIO SIM
+#[derive(Debug)]
+pub struct Sim {
+ ctx: SimCtx,
+ dev: SimDev,
+ bank: SimBank,
+}
+
+unsafe impl Send for Sim {}
+unsafe impl Sync for Sim {}
+
+impl Sim {
+ pub fn new(ngpio: Option<u64>, label: Option<&str>, enable: bool) -> Result<Self> {
+ let ctx = SimCtx::new()?;
+ let dev = SimDev::new(&ctx)?;
+ let bank = SimBank::new(&dev)?;
+
+ if let Some(ngpio) = ngpio {
+ bank.set_num_lines(ngpio)?;
+ }
+
+ if let Some(label) = label {
+ bank.set_label(label)?;
+ }
+
+ if enable {
+ dev.enable()?;
+ }
+
+ Ok(Self { ctx, dev, bank })
+ }
+
+ pub fn chip_name(&self) -> &str {
+ self.bank.chip_name().unwrap()
+ }
+
+ pub fn dev_path(&self) -> PathBuf {
+ self.bank.dev_path().unwrap()
+ }
+
+ pub fn val(&self, offset: Offset) -> Result<u32> {
+ self.bank.val(offset)
+ }
+
+ pub fn set_label(&self, label: &str) -> Result<()> {
+ self.bank.set_label(label)
+ }
+
+ pub fn set_num_lines(&self, num: u64) -> Result<()> {
+ self.bank.set_num_lines(num)
+ }
+
+ pub fn set_line_name(&self, offset: Offset, name: &str) -> Result<()> {
+ self.bank.set_line_name(offset, name)
+ }
+
+ pub fn set_pull(&self, offset: Offset, pull: i32) -> Result<()> {
+ self.bank.set_pull(offset, pull)
+ }
+
+ pub fn hog_line(&self, offset: Offset, name: &str, dir: i32) -> Result<()> {
+ self.bank.hog_line(offset, name, dir)
+ }
+
+ pub fn enable(&self) -> Result<()> {
+ self.dev.enable()
+ }
+
+ pub fn disable(&self) -> Result<()> {
+ self.dev.disable()
+ }
+}
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH V5 6/8] gpiosim: Add pre generated rust bindings
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
` (4 preceding siblings ...)
2022-08-02 12:18 ` [PATCH V5 5/8] libgpiod: Add gpiosim rust crate Viresh Kumar
@ 2022-08-02 12:18 ` Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 7/8] libgpiod: Add rust tests Viresh Kumar
` (2 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
This adds a copy of pre generated bindings and adds the suggested way of
updating those in README.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
bindings/rust/gpiosim/README.md | 11 ++
bindings/rust/gpiosim/src/bindings.rs | 180 ++++++++++++++++++++++++++
2 files changed, 191 insertions(+)
create mode 100644 bindings/rust/gpiosim/README.md
create mode 100644 bindings/rust/gpiosim/src/bindings.rs
diff --git a/bindings/rust/gpiosim/README.md b/bindings/rust/gpiosim/README.md
new file mode 100644
index 000000000000..acb84543dbdc
--- /dev/null
+++ b/bindings/rust/gpiosim/README.md
@@ -0,0 +1,11 @@
+# Generated gpiosim Rust FFI bindings
+Automatically generated Rust FFI bindings via
+ [bindgen](https://github.com/rust-lang/rust-bindgen).
+
+## Updating bindings
+1. Clone the source from
+ <https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/>
+2. run `cd libgpiod/bindings/rust/gpiosim/`
+2. run `cargo build --features generate`
+3. Copy the bindings 'cp ../target/debug/build/gpiosim-###/out/bindings.rs src/bindings.rs'
+4. Commit changes in `src/bindings.rs`
diff --git a/bindings/rust/gpiosim/src/bindings.rs b/bindings/rust/gpiosim/src/bindings.rs
new file mode 100644
index 000000000000..bac347f1aab9
--- /dev/null
+++ b/bindings/rust/gpiosim/src/bindings.rs
@@ -0,0 +1,180 @@
+/* automatically generated by rust-bindgen 0.59.2 */
+
+pub const true_: u32 = 1;
+pub const false_: u32 = 0;
+pub const __bool_true_false_are_defined: u32 = 1;
+pub type size_t = ::std::os::raw::c_ulong;
+pub type wchar_t = ::std::os::raw::c_int;
+#[repr(C)]
+#[repr(align(16))]
+#[derive(Debug, Copy, Clone)]
+pub struct max_align_t {
+ pub __clang_max_align_nonce1: ::std::os::raw::c_longlong,
+ pub __bindgen_padding_0: u64,
+ pub __clang_max_align_nonce2: u128,
+}
+#[test]
+fn bindgen_test_layout_max_align_t() {
+ assert_eq!(
+ ::std::mem::size_of::<max_align_t>(),
+ 32usize,
+ concat!("Size of: ", stringify!(max_align_t))
+ );
+ assert_eq!(
+ ::std::mem::align_of::<max_align_t>(),
+ 16usize,
+ concat!("Alignment of ", stringify!(max_align_t))
+ );
+ assert_eq!(
+ unsafe {
+ &(*(::std::ptr::null::<max_align_t>())).__clang_max_align_nonce1 as *const _ as usize
+ },
+ 0usize,
+ concat!(
+ "Offset of field: ",
+ stringify!(max_align_t),
+ "::",
+ stringify!(__clang_max_align_nonce1)
+ )
+ );
+ assert_eq!(
+ unsafe {
+ &(*(::std::ptr::null::<max_align_t>())).__clang_max_align_nonce2 as *const _ as usize
+ },
+ 16usize,
+ concat!(
+ "Offset of field: ",
+ stringify!(max_align_t),
+ "::",
+ stringify!(__clang_max_align_nonce2)
+ )
+ );
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiosim_ctx {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiosim_dev {
+ _unused: [u8; 0],
+}
+#[repr(C)]
+#[derive(Debug, Copy, Clone)]
+pub struct gpiosim_bank {
+ _unused: [u8; 0],
+}
+pub const GPIOSIM_VALUE_INACTIVE: ::std::os::raw::c_uint = 0;
+pub const GPIOSIM_VALUE_ACTIVE: ::std::os::raw::c_uint = 1;
+pub type _bindgen_ty_1 = ::std::os::raw::c_uint;
+pub const GPIOSIM_PULL_DOWN: ::std::os::raw::c_uint = 1;
+pub const GPIOSIM_PULL_UP: ::std::os::raw::c_uint = 2;
+pub type _bindgen_ty_2 = ::std::os::raw::c_uint;
+pub const GPIOSIM_HOG_DIR_INPUT: ::std::os::raw::c_uint = 1;
+pub const GPIOSIM_HOG_DIR_OUTPUT_HIGH: ::std::os::raw::c_uint = 2;
+pub const GPIOSIM_HOG_DIR_OUTPUT_LOW: ::std::os::raw::c_uint = 3;
+pub type _bindgen_ty_3 = ::std::os::raw::c_uint;
+extern "C" {
+ pub fn gpiosim_ctx_new() -> *mut gpiosim_ctx;
+}
+extern "C" {
+ pub fn gpiosim_ctx_ref(ctx: *mut gpiosim_ctx) -> *mut gpiosim_ctx;
+}
+extern "C" {
+ pub fn gpiosim_ctx_unref(ctx: *mut gpiosim_ctx);
+}
+extern "C" {
+ pub fn gpiosim_dev_new(ctx: *mut gpiosim_ctx) -> *mut gpiosim_dev;
+}
+extern "C" {
+ pub fn gpiosim_dev_ref(dev: *mut gpiosim_dev) -> *mut gpiosim_dev;
+}
+extern "C" {
+ pub fn gpiosim_dev_unref(dev: *mut gpiosim_dev);
+}
+extern "C" {
+ pub fn gpiosim_dev_get_ctx(dev: *mut gpiosim_dev) -> *mut gpiosim_ctx;
+}
+extern "C" {
+ pub fn gpiosim_dev_get_name(dev: *mut gpiosim_dev) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ pub fn gpiosim_dev_enable(dev: *mut gpiosim_dev) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_dev_disable(dev: *mut gpiosim_dev) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_dev_is_live(dev: *mut gpiosim_dev) -> bool;
+}
+extern "C" {
+ pub fn gpiosim_bank_new(dev: *mut gpiosim_dev) -> *mut gpiosim_bank;
+}
+extern "C" {
+ pub fn gpiosim_bank_ref(bank: *mut gpiosim_bank) -> *mut gpiosim_bank;
+}
+extern "C" {
+ pub fn gpiosim_bank_unref(bank: *mut gpiosim_bank);
+}
+extern "C" {
+ pub fn gpiosim_bank_get_dev(bank: *mut gpiosim_bank) -> *mut gpiosim_dev;
+}
+extern "C" {
+ pub fn gpiosim_bank_get_chip_name(bank: *mut gpiosim_bank) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ pub fn gpiosim_bank_get_dev_path(bank: *mut gpiosim_bank) -> *const ::std::os::raw::c_char;
+}
+extern "C" {
+ pub fn gpiosim_bank_set_label(
+ bank: *mut gpiosim_bank,
+ label: *const ::std::os::raw::c_char,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_bank_set_num_lines(
+ bank: *mut gpiosim_bank,
+ num_lines: size_t,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_bank_set_line_name(
+ bank: *mut gpiosim_bank,
+ offset: ::std::os::raw::c_uint,
+ name: *const ::std::os::raw::c_char,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_bank_hog_line(
+ bank: *mut gpiosim_bank,
+ offset: ::std::os::raw::c_uint,
+ name: *const ::std::os::raw::c_char,
+ direction: ::std::os::raw::c_int,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_bank_clear_hog(
+ bank: *mut gpiosim_bank,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_bank_get_value(
+ bank: *mut gpiosim_bank,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_bank_get_pull(
+ bank: *mut gpiosim_bank,
+ offset: ::std::os::raw::c_uint,
+ ) -> ::std::os::raw::c_int;
+}
+extern "C" {
+ pub fn gpiosim_bank_set_pull(
+ bank: *mut gpiosim_bank,
+ offset: ::std::os::raw::c_uint,
+ pull: ::std::os::raw::c_int,
+ ) -> ::std::os::raw::c_int;
+}
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH V5 7/8] libgpiod: Add rust tests
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
` (5 preceding siblings ...)
2022-08-02 12:18 ` [PATCH V5 6/8] gpiosim: Add pre generated rust bindings Viresh Kumar
@ 2022-08-02 12:18 ` Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 8/8] libgpiod: Integrate building of rust bindings with make Viresh Kumar
2022-08-05 14:25 ` [PATCH V5 0/8] libgpiod: Add Rust bindings Bartosz Golaszewski
8 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
Add tests for the rust bindings, quite similar to the ones in cxx
bindings.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
bindings/rust/libgpiod/Cargo.toml | 3 +
bindings/rust/libgpiod/tests/chip.rs | 97 ++++
bindings/rust/libgpiod/tests/common/config.rs | 142 ++++++
bindings/rust/libgpiod/tests/common/mod.rs | 10 +
bindings/rust/libgpiod/tests/edge_event.rs | 294 +++++++++++
bindings/rust/libgpiod/tests/info_event.rs | 120 +++++
bindings/rust/libgpiod/tests/line_config.rs | 293 +++++++++++
bindings/rust/libgpiod/tests/line_info.rs | 272 ++++++++++
bindings/rust/libgpiod/tests/line_request.rs | 473 ++++++++++++++++++
.../rust/libgpiod/tests/request_config.rs | 42 ++
10 files changed, 1746 insertions(+)
create mode 100644 bindings/rust/libgpiod/tests/chip.rs
create mode 100644 bindings/rust/libgpiod/tests/common/config.rs
create mode 100644 bindings/rust/libgpiod/tests/common/mod.rs
create mode 100644 bindings/rust/libgpiod/tests/edge_event.rs
create mode 100644 bindings/rust/libgpiod/tests/info_event.rs
create mode 100644 bindings/rust/libgpiod/tests/line_config.rs
create mode 100644 bindings/rust/libgpiod/tests/line_info.rs
create mode 100644 bindings/rust/libgpiod/tests/line_request.rs
create mode 100644 bindings/rust/libgpiod/tests/request_config.rs
diff --git a/bindings/rust/libgpiod/Cargo.toml b/bindings/rust/libgpiod/Cargo.toml
index f25242abb153..8abcaacdee67 100644
--- a/bindings/rust/libgpiod/Cargo.toml
+++ b/bindings/rust/libgpiod/Cargo.toml
@@ -11,3 +11,6 @@ libc = ">=0.2.39"
libgpiod-sys = { path = "../libgpiod-sys" }
thiserror = "1.0"
vmm-sys-util = "=0.10.0"
+
+[dev-dependencies]
+gpiosim = { path = "../gpiosim" }
diff --git a/bindings/rust/libgpiod/tests/chip.rs b/bindings/rust/libgpiod/tests/chip.rs
new file mode 100644
index 000000000000..ce592331b5e8
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/chip.rs
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+mod common;
+
+mod chip {
+ use libc::{ENODEV, ENOENT, ENOTTY};
+ use std::path::PathBuf;
+
+ use vmm_sys_util::errno::Error as Errno;
+
+ use gpiosim::Sim;
+ use libgpiod::{chip::Chip, Error as ChipError, OperationType};
+
+ mod open {
+ use super::*;
+
+ #[test]
+ fn nonexistent_file() {
+ assert_eq!(
+ Chip::open(&PathBuf::from("/dev/nonexistent")).unwrap_err(),
+ ChipError::OperationFailed(OperationType::ChipOpen, Errno::new(ENOENT))
+ );
+ }
+
+ #[test]
+ fn no_dev_file() {
+ assert_eq!(
+ Chip::open(&PathBuf::from("/tmp")).unwrap_err(),
+ ChipError::OperationFailed(OperationType::ChipOpen, Errno::new(ENOTTY))
+ );
+ }
+
+ #[test]
+ fn non_gpio_char_dev_file() {
+ assert_eq!(
+ Chip::open(&PathBuf::from("/dev/null")).unwrap_err(),
+ ChipError::OperationFailed(OperationType::ChipOpen, Errno::new(ENODEV))
+ );
+ }
+
+ #[test]
+ fn gpiosim_file() {
+ let sim = Sim::new(None, None, true).unwrap();
+ assert!(Chip::open(&sim.dev_path()).is_ok());
+ }
+ }
+
+ mod verify {
+ use super::*;
+ const NGPIO: u64 = 16;
+ const LABEL: &str = "foobar";
+
+ #[test]
+ fn basic_helpers() {
+ let sim = Sim::new(Some(NGPIO), Some(LABEL), true).unwrap();
+ let chip = Chip::open(&sim.dev_path()).unwrap();
+
+ assert_eq!(chip.label().unwrap(), LABEL);
+ assert_eq!(chip.name().unwrap(), sim.chip_name());
+ assert_eq!(chip.path().unwrap(), sim.dev_path().to_str().unwrap());
+ assert_eq!(chip.num_lines(), NGPIO as usize);
+ assert!(chip.fd().is_ok());
+ }
+
+ #[test]
+ fn find_line() {
+ let sim = Sim::new(Some(NGPIO), None, false).unwrap();
+ sim.set_line_name(0, "zero").unwrap();
+ sim.set_line_name(2, "two").unwrap();
+ sim.set_line_name(3, "three").unwrap();
+ sim.set_line_name(5, "five").unwrap();
+ sim.set_line_name(10, "ten").unwrap();
+ sim.set_line_name(11, "ten").unwrap();
+ sim.enable().unwrap();
+
+ let chip = Chip::open(&sim.dev_path()).unwrap();
+
+ // Success case
+ assert_eq!(chip.line_offset_from_name("zero").unwrap(), 0);
+ assert_eq!(chip.line_offset_from_name("two").unwrap(), 2);
+ assert_eq!(chip.line_offset_from_name("three").unwrap(), 3);
+ assert_eq!(chip.line_offset_from_name("five").unwrap(), 5);
+
+ // Success with duplicate names, should return first entry
+ assert_eq!(chip.line_offset_from_name("ten").unwrap(), 10);
+
+ // Failure
+ assert_eq!(
+ chip.line_offset_from_name("nonexistent").unwrap_err(),
+ ChipError::OperationFailed(OperationType::ChipGetLine, Errno::new(ENOENT))
+ );
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/tests/common/config.rs b/bindings/rust/libgpiod/tests/common/config.rs
new file mode 100644
index 000000000000..cffc8830ea03
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/common/config.rs
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+use std::sync::Arc;
+use std::time::Duration;
+
+use gpiosim::Sim;
+use libgpiod::{
+ chip::Chip, line, request, Bias, Direction, Drive, Edge, EventClock, Offset, Result, Setting,
+ SettingMap, Value,
+};
+
+pub(crate) struct TestConfig {
+ sim: Arc<Sim>,
+ chip: Option<Chip>,
+ request: Option<line::Request>,
+ rconfig: request::Config,
+ lconfig: line::Config,
+}
+
+impl TestConfig {
+ pub(crate) fn new(ngpio: u64) -> Result<Self> {
+ Ok(Self {
+ sim: Arc::new(Sim::new(Some(ngpio), None, true)?),
+ chip: None,
+ request: None,
+ rconfig: request::Config::new().unwrap(),
+ lconfig: line::Config::new().unwrap(),
+ })
+ }
+
+ pub(crate) fn set_pull(&self, offsets: &[Offset], pulls: &[u32]) {
+ for i in 0..pulls.len() {
+ self.sim.set_pull(offsets[i], pulls[i] as i32).unwrap();
+ }
+ }
+
+ pub(crate) fn rconfig_set_consumer(&self, consumer: &str) {
+ self.rconfig.set_consumer(consumer);
+ }
+
+ pub(crate) fn rconfig_set_offsets(&self, offsets: &[Offset]) {
+ self.rconfig.set_offsets(offsets);
+ }
+
+ pub(crate) fn lconfig_val(
+ &mut self,
+ dir: Option<Direction>,
+ val: Option<Value>,
+ val_override: Option<(u32, Value)>,
+ ) {
+ let mut settings = Vec::new();
+
+ if let Some(dir) = dir {
+ settings.push(Setting::Direction(dir));
+ }
+
+ if let Some(val) = val {
+ settings.push(Setting::OutputValue(val));
+ }
+
+ if !settings.is_empty() {
+ self.lconfig.set_prop_default(&settings);
+ }
+
+ if let Some((offset, val)) = val_override {
+ let mut map = SettingMap::new();
+ map.insert(offset.into(), Setting::OutputValue(val));
+
+ self.lconfig.set_prop_override(map);
+ }
+ }
+
+ pub(crate) fn lconfig_bias(&mut self, dir: Direction, bias: Option<Bias>) {
+ let settings = vec![Setting::Direction(dir), Setting::Bias(bias)];
+ self.lconfig.set_prop_default(&settings);
+ }
+
+ pub(crate) fn lconfig_clock(&mut self, clock: EventClock) {
+ let settings = vec![Setting::EventClock(clock)];
+ self.lconfig.set_prop_default(&settings);
+ }
+
+ pub(crate) fn lconfig_debounce(&mut self, duration: Duration) {
+ let settings = vec![
+ Setting::Direction(Direction::Input),
+ Setting::DebouncePeriod(duration),
+ ];
+ self.lconfig.set_prop_default(&settings);
+ }
+
+ pub(crate) fn lconfig_drive(&mut self, dir: Direction, drive: Drive) {
+ let settings = vec![Setting::Direction(dir), Setting::Drive(drive)];
+ self.lconfig.set_prop_default(&settings);
+ }
+
+ pub(crate) fn lconfig_edge(&mut self, dir: Option<Direction>, edge: Option<Edge>) {
+ let mut settings = Vec::new();
+
+ if let Some(dir) = dir {
+ settings.push(Setting::Direction(dir));
+ }
+
+ settings.push(Setting::EdgeDetection(edge));
+ self.lconfig.set_prop_default(&settings);
+ }
+
+ pub(crate) fn lconfig_val_raw(&mut self) {
+ self.lconfig_val(None, None, None);
+ }
+
+ pub(crate) fn request_lines(&mut self) -> Result<()> {
+ let chip = Chip::open(&self.sim.dev_path())?;
+
+ self.request = Some(chip.request_lines(&self.rconfig, &self.lconfig)?);
+ self.chip = Some(chip);
+
+ Ok(())
+ }
+
+ pub(crate) fn sim(&self) -> Arc<Sim> {
+ self.sim.clone()
+ }
+
+ pub(crate) fn chip(&self) -> &Chip {
+ self.chip.as_ref().unwrap()
+ }
+
+ pub(crate) fn request(&self) -> &line::Request {
+ self.request.as_ref().unwrap()
+ }
+}
+
+impl Drop for TestConfig {
+ fn drop(&mut self) {
+ // Explicit freeing is important to make sure "request" get freed
+ // before "sim" and "chip".
+ self.request = None;
+ }
+}
diff --git a/bindings/rust/libgpiod/tests/common/mod.rs b/bindings/rust/libgpiod/tests/common/mod.rs
new file mode 100644
index 000000000000..8904f7121b4c
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/common/mod.rs
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+#[allow(dead_code)]
+mod config;
+
+#[allow(unused_imports)]
+pub(crate) use config::*;
diff --git a/bindings/rust/libgpiod/tests/edge_event.rs b/bindings/rust/libgpiod/tests/edge_event.rs
new file mode 100644
index 000000000000..b903969b25ae
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/edge_event.rs
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+mod common;
+
+mod edge_event {
+ use std::sync::Arc;
+ use std::thread::{sleep, spawn};
+ use std::time::Duration;
+
+ use crate::common::*;
+ use gpiosim::Sim;
+ use gpiosim::{GPIOSIM_PULL_DOWN, GPIOSIM_PULL_UP};
+ use libgpiod::{edge, Edge, EdgeKind, Offset};
+
+ const NGPIO: u64 = 8;
+
+ mod buffer_capacity {
+ use super::*;
+
+ #[test]
+ fn default_capacity() {
+ assert_eq!(edge::event::Buffer::new(0).unwrap().capacity(), 64);
+ }
+
+ #[test]
+ fn user_defined_capacity() {
+ assert_eq!(edge::event::Buffer::new(123).unwrap().capacity(), 123);
+ }
+
+ #[test]
+ fn max_capacity() {
+ assert_eq!(edge::event::Buffer::new(1024 * 2).unwrap().capacity(), 1024);
+ }
+ }
+
+ mod trigger {
+ use super::*;
+
+ // Helpers to generate events
+ fn trigger_falling_and_rising_edge(sim: Arc<Sim>, offset: Offset) {
+ spawn(move || {
+ sleep(Duration::from_millis(30));
+ sim.set_pull(offset, GPIOSIM_PULL_UP as i32).unwrap();
+
+ sleep(Duration::from_millis(30));
+ sim.set_pull(offset, GPIOSIM_PULL_DOWN as i32).unwrap();
+ });
+ }
+
+ fn trigger_rising_edge_events_on_two_offsets(sim: Arc<Sim>, offset: [Offset; 2]) {
+ spawn(move || {
+ sleep(Duration::from_millis(30));
+ sim.set_pull(offset[0], GPIOSIM_PULL_UP as i32).unwrap();
+
+ sleep(Duration::from_millis(30));
+ sim.set_pull(offset[1], GPIOSIM_PULL_UP as i32).unwrap();
+ });
+ }
+
+ fn trigger_multiple_events(sim: Arc<Sim>, offset: Offset) {
+ sim.set_pull(offset, GPIOSIM_PULL_UP as i32).unwrap();
+ sleep(Duration::from_millis(10));
+
+ sim.set_pull(offset, GPIOSIM_PULL_DOWN as i32).unwrap();
+ sleep(Duration::from_millis(10));
+
+ sim.set_pull(offset, GPIOSIM_PULL_UP as i32).unwrap();
+ sleep(Duration::from_millis(10));
+ }
+
+ #[test]
+ fn both_edges() {
+ const GPIO: Offset = 2;
+ let buf = edge::event::Buffer::new(0).unwrap();
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[GPIO]);
+ config.lconfig_edge(None, Some(Edge::Both));
+ config.request_lines().unwrap();
+
+ // Generate events
+ trigger_falling_and_rising_edge(config.sim(), GPIO);
+
+ // Rising event
+ assert!(config
+ .request()
+ .wait_edge_event(Some(Duration::from_secs(1)))
+ .unwrap());
+
+ assert_eq!(config.request().read_edge_events(&buf).unwrap(), 1);
+ assert_eq!(buf.len(), 1);
+
+ let event = buf.event(0).unwrap();
+ let ts_rising = event.timestamp();
+ assert_eq!(event.event_type().unwrap(), EdgeKind::Rising);
+ assert_eq!(event.line_offset(), GPIO);
+
+ // Falling event
+ assert!(config
+ .request()
+ .wait_edge_event(Some(Duration::from_secs(1)))
+ .unwrap());
+
+ assert_eq!(config.request().read_edge_events(&buf).unwrap(), 1);
+ assert_eq!(buf.len(), 1);
+
+ let event = buf.event(0).unwrap();
+ let ts_falling = event.timestamp();
+ assert_eq!(event.event_type().unwrap(), EdgeKind::Falling);
+ assert_eq!(event.line_offset(), GPIO);
+
+ // No events available
+ assert!(!config
+ .request()
+ .wait_edge_event(Some(Duration::from_millis(100)))
+ .unwrap());
+
+ assert!(ts_falling > ts_rising);
+ }
+
+ #[test]
+ fn rising_edge() {
+ const GPIO: Offset = 6;
+ let buf = edge::event::Buffer::new(0).unwrap();
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[GPIO]);
+ config.lconfig_edge(None, Some(Edge::Rising));
+ config.request_lines().unwrap();
+
+ // Generate events
+ trigger_falling_and_rising_edge(config.sim(), GPIO);
+
+ // Rising event
+ assert!(config
+ .request()
+ .wait_edge_event(Some(Duration::from_secs(1)))
+ .unwrap());
+
+ assert_eq!(config.request().read_edge_events(&buf).unwrap(), 1);
+ assert_eq!(buf.len(), 1);
+
+ let event = buf.event(0).unwrap();
+ assert_eq!(event.event_type().unwrap(), EdgeKind::Rising);
+ assert_eq!(event.line_offset(), GPIO);
+
+ // No events available
+ assert!(!config
+ .request()
+ .wait_edge_event(Some(Duration::from_millis(100)))
+ .unwrap());
+ }
+
+ #[test]
+ fn falling_edge() {
+ const GPIO: Offset = 7;
+ let buf = edge::event::Buffer::new(0).unwrap();
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[GPIO]);
+ config.lconfig_edge(None, Some(Edge::Falling));
+ config.request_lines().unwrap();
+
+ // Generate events
+ trigger_falling_and_rising_edge(config.sim(), GPIO);
+
+ // Falling event
+ assert!(config
+ .request()
+ .wait_edge_event(Some(Duration::from_secs(1)))
+ .unwrap());
+
+ assert_eq!(config.request().read_edge_events(&buf).unwrap(), 1);
+ assert_eq!(buf.len(), 1);
+
+ let event = buf.event(0).unwrap();
+ assert_eq!(event.event_type().unwrap(), EdgeKind::Falling);
+ assert_eq!(event.line_offset(), GPIO);
+
+ // No events available
+ assert!(!config
+ .request()
+ .wait_edge_event(Some(Duration::from_millis(100)))
+ .unwrap());
+ }
+
+ #[test]
+ fn edge_sequence() {
+ const GPIO: [u32; 2] = [0, 1];
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&GPIO);
+ config.lconfig_edge(None, Some(Edge::Both));
+ config.request_lines().unwrap();
+
+ // Generate events
+ trigger_rising_edge_events_on_two_offsets(config.sim(), GPIO);
+
+ // Rising event GPIO 0
+ let buf = edge::event::Buffer::new(0).unwrap();
+ assert!(config
+ .request()
+ .wait_edge_event(Some(Duration::from_secs(1)))
+ .unwrap());
+
+ assert_eq!(config.request().read_edge_events(&buf).unwrap(), 1);
+ assert_eq!(buf.len(), 1);
+
+ let event = buf.event(0).unwrap();
+ assert_eq!(event.event_type().unwrap(), EdgeKind::Rising);
+ assert_eq!(event.line_offset(), GPIO[0]);
+ assert_eq!(event.global_seqno(), 1);
+ assert_eq!(event.line_seqno(), 1);
+
+ // Rising event GPIO 1
+ assert!(config
+ .request()
+ .wait_edge_event(Some(Duration::from_secs(1)))
+ .unwrap());
+
+ assert_eq!(config.request().read_edge_events(&buf).unwrap(), 1);
+ assert_eq!(buf.len(), 1);
+
+ let event = buf.event(0).unwrap();
+ assert_eq!(event.event_type().unwrap(), EdgeKind::Rising);
+ assert_eq!(event.line_offset(), GPIO[1]);
+ assert_eq!(event.global_seqno(), 2);
+ assert_eq!(event.line_seqno(), 1);
+
+ // No events available
+ assert!(!config
+ .request()
+ .wait_edge_event(Some(Duration::from_millis(100)))
+ .unwrap());
+ }
+
+ #[test]
+ fn multiple_events() {
+ const GPIO: Offset = 1;
+ let buf = edge::event::Buffer::new(0).unwrap();
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[GPIO]);
+ config.lconfig_edge(None, Some(Edge::Both));
+ config.request_lines().unwrap();
+
+ // Generate events
+ trigger_multiple_events(config.sim(), GPIO);
+
+ // Read multiple events
+ assert!(config
+ .request()
+ .wait_edge_event(Some(Duration::from_secs(1)))
+ .unwrap());
+
+ assert_eq!(config.request().read_edge_events(&buf).unwrap(), 3);
+ assert_eq!(buf.len(), 3);
+
+ let mut global_seqno = 1;
+ let mut line_seqno = 1;
+
+ // Verify sequence number of events
+ for i in 0..3 {
+ let event = buf.event(i).unwrap();
+ assert_eq!(event.line_offset(), GPIO);
+ assert_eq!(event.global_seqno(), global_seqno);
+ assert_eq!(event.line_seqno(), line_seqno);
+
+ global_seqno += 1;
+ line_seqno += 1;
+ }
+ }
+
+ #[test]
+ fn over_capacity() {
+ const GPIO: Offset = 2;
+ let buf = edge::event::Buffer::new(2).unwrap();
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[GPIO]);
+ config.lconfig_edge(None, Some(Edge::Both));
+ config.request_lines().unwrap();
+
+ // Generate events
+ trigger_multiple_events(config.sim(), GPIO);
+
+ // Read multiple events
+ assert!(config
+ .request()
+ .wait_edge_event(Some(Duration::from_secs(1)))
+ .unwrap());
+
+ assert_eq!(config.request().read_edge_events(&buf).unwrap(), 2);
+ assert_eq!(buf.len(), 2);
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/tests/info_event.rs b/bindings/rust/libgpiod/tests/info_event.rs
new file mode 100644
index 000000000000..230b0a0352df
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/info_event.rs
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+mod common;
+
+mod info_event {
+ use libc::EINVAL;
+ use std::sync::Arc;
+ use std::thread::{sleep, spawn};
+ use std::time::Duration;
+
+ use vmm_sys_util::errno::Error as Errno;
+
+ use gpiosim::Sim;
+ use libgpiod::{
+ chip::Chip, line, request, Direction, Error as ChipError, InfoChangeKind, Offset,
+ OperationType, Setting,
+ };
+
+ fn request_reconfigure_line(chip: Arc<Chip>) {
+ spawn(move || {
+ sleep(Duration::from_millis(10));
+
+ let lconfig1 = line::Config::new().unwrap();
+ let rconfig = request::Config::new().unwrap();
+ rconfig.set_offsets(&[7]);
+
+ let request = chip.request_lines(&rconfig, &lconfig1).unwrap();
+
+ sleep(Duration::from_millis(10));
+
+ let mut lconfig2 = line::Config::new().unwrap();
+ lconfig2.set_prop_default(&[Setting::Direction(Direction::Output)]);
+
+ request.reconfigure_lines(&lconfig2).unwrap();
+
+ sleep(Duration::from_millis(10));
+ });
+ }
+
+ mod watch {
+ use super::*;
+ const NGPIO: u64 = 8;
+ const GPIO: Offset = 7;
+
+ #[test]
+ fn line_info() {
+ let sim = Sim::new(Some(NGPIO), None, true).unwrap();
+ let chip = Chip::open(&sim.dev_path()).unwrap();
+
+ assert_eq!(
+ chip.watch_line_info(NGPIO as u32).unwrap_err(),
+ ChipError::OperationFailed(OperationType::ChipWatchLineInfo, Errno::new(EINVAL))
+ );
+
+ let info = chip.watch_line_info(GPIO).unwrap();
+ assert_eq!(info.offset(), GPIO);
+
+ // No events available
+ assert!(!chip
+ .wait_info_event(Some(Duration::from_millis(100)))
+ .unwrap());
+ }
+
+ #[test]
+ fn reconfigure() {
+ let sim = Sim::new(Some(NGPIO), None, true).unwrap();
+ let chip = Arc::new(Chip::open(&sim.dev_path()).unwrap());
+ let info = chip.watch_line_info(GPIO).unwrap();
+
+ assert_eq!(info.direction().unwrap(), Direction::Input);
+
+ // Generate events
+ request_reconfigure_line(chip.clone());
+
+ // Line requested event
+ assert!(chip.wait_info_event(Some(Duration::from_secs(1))).unwrap());
+ let event = chip.read_info_event().unwrap();
+ let ts_req = event.timestamp();
+
+ assert_eq!(event.event_type().unwrap(), InfoChangeKind::LineRequested);
+ assert_eq!(
+ event.line_info().unwrap().direction().unwrap(),
+ Direction::Input
+ );
+
+ // Line changed event
+ assert!(chip.wait_info_event(Some(Duration::from_secs(1))).unwrap());
+ let event = chip.read_info_event().unwrap();
+ let ts_rec = event.timestamp();
+
+ assert_eq!(
+ event.event_type().unwrap(),
+ InfoChangeKind::LineConfigChanged
+ );
+ assert_eq!(
+ event.line_info().unwrap().direction().unwrap(),
+ Direction::Output
+ );
+
+ // Line released event
+ assert!(chip.wait_info_event(Some(Duration::from_secs(1))).unwrap());
+ let event = chip.read_info_event().unwrap();
+ let ts_rel = event.timestamp();
+
+ assert_eq!(event.event_type().unwrap(), InfoChangeKind::LineReleased);
+
+ // No events available
+ assert!(!chip
+ .wait_info_event(Some(Duration::from_millis(100)))
+ .unwrap());
+
+ // Check timestamps are really monotonic.
+ assert!(ts_rel > ts_rec);
+ assert!(ts_rec > ts_req);
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/tests/line_config.rs b/bindings/rust/libgpiod/tests/line_config.rs
new file mode 100644
index 000000000000..0d1a5ca7a0a8
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/line_config.rs
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+mod common;
+
+mod line_config {
+ use std::time::Duration;
+
+ use libgpiod::{
+ line, Bias, Direction, Drive, Edge, EventClock, Offset, Setting, SettingKind,
+ SettingKindMap, SettingMap, Value, ValueMap,
+ };
+
+ #[test]
+ fn default() {
+ let lconfig = line::Config::new().unwrap();
+
+ assert_eq!(
+ lconfig.prop_default(SettingKind::Direction).unwrap(),
+ Setting::Direction(Direction::AsIs)
+ );
+ assert_eq!(
+ lconfig.prop_default(SettingKind::EdgeDetection).unwrap(),
+ Setting::EdgeDetection(None)
+ );
+ assert_eq!(
+ lconfig.prop_default(SettingKind::Bias).unwrap(),
+ Setting::Bias(None)
+ );
+ assert_eq!(
+ lconfig.prop_default(SettingKind::Drive).unwrap(),
+ Setting::Drive(Drive::PushPull)
+ );
+ assert_eq!(
+ lconfig.prop_default(SettingKind::ActiveLow).unwrap(),
+ Setting::ActiveLow(false)
+ );
+ assert_eq!(
+ lconfig.prop_default(SettingKind::DebouncePeriod).unwrap(),
+ Setting::DebouncePeriod(Duration::from_millis(0))
+ );
+ assert_eq!(
+ lconfig.prop_default(SettingKind::EventClock).unwrap(),
+ Setting::EventClock(EventClock::Monotonic)
+ );
+ assert_eq!(
+ lconfig.prop_default(SettingKind::OutputValue).unwrap(),
+ Setting::OutputValue(Value::InActive)
+ );
+ assert_eq!(lconfig.overrides().unwrap().len(), 0);
+ }
+
+ mod overrides {
+ use super::*;
+
+ #[test]
+ fn direction() {
+ const GPIO: Offset = 0;
+ let mut lconfig = line::Config::new().unwrap();
+
+ lconfig.set_prop_default(&[Setting::Direction(Direction::AsIs)]);
+
+ let mut map = SettingMap::new();
+ map.insert(GPIO.into(), Setting::Direction(Direction::Input));
+ lconfig.set_prop_override(map);
+
+ assert!(lconfig.prop_is_overridden(SettingKind::Direction, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::Direction, GPIO).unwrap(),
+ Setting::Direction(Direction::Input)
+ );
+
+ let mut map = SettingKindMap::new();
+ map.insert(GPIO.into(), SettingKind::Direction);
+ lconfig.clear_prop_override(map);
+ assert!(!lconfig.prop_is_overridden(SettingKind::Direction, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::Direction, GPIO).unwrap(),
+ Setting::Direction(Direction::AsIs)
+ );
+ }
+
+ #[test]
+ fn edge_detection() {
+ const GPIO: Offset = 1;
+ let mut lconfig = line::Config::new().unwrap();
+
+ lconfig.set_prop_default(&[Setting::EdgeDetection(None)]);
+
+ let mut map = SettingMap::new();
+ map.insert(GPIO.into(), Setting::EdgeDetection(Some(Edge::Both)));
+ lconfig.set_prop_override(map);
+
+ assert!(lconfig.prop_is_overridden(SettingKind::EdgeDetection, GPIO));
+ assert_eq!(
+ lconfig
+ .prop_offset(SettingKind::EdgeDetection, GPIO)
+ .unwrap(),
+ Setting::EdgeDetection(Some(Edge::Both))
+ );
+
+ let mut map = SettingKindMap::new();
+ map.insert(GPIO.into(), SettingKind::EdgeDetection);
+ lconfig.clear_prop_override(map);
+ assert!(!lconfig.prop_is_overridden(SettingKind::EdgeDetection, GPIO));
+ assert_eq!(
+ lconfig
+ .prop_offset(SettingKind::EdgeDetection, GPIO)
+ .unwrap(),
+ Setting::EdgeDetection(None)
+ );
+ }
+
+ #[test]
+ fn bias() {
+ const GPIO: Offset = 2;
+ let mut lconfig = line::Config::new().unwrap();
+
+ lconfig.set_prop_default(&[Setting::Bias(None)]);
+
+ let mut map = SettingMap::new();
+ map.insert(GPIO.into(), Setting::Bias(Some(Bias::PullDown)));
+ lconfig.set_prop_override(map);
+
+ assert!(lconfig.prop_is_overridden(SettingKind::Bias, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::Bias, GPIO).unwrap(),
+ Setting::Bias(Some(Bias::PullDown))
+ );
+
+ let mut map = SettingKindMap::new();
+ map.insert(GPIO.into(), SettingKind::Bias);
+ lconfig.clear_prop_override(map);
+ assert!(!lconfig.prop_is_overridden(SettingKind::Bias, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::Bias, GPIO).unwrap(),
+ Setting::Bias(None)
+ );
+ }
+
+ #[test]
+ fn drive() {
+ const GPIO: Offset = 3;
+ let mut lconfig = line::Config::new().unwrap();
+
+ lconfig.set_prop_default(&[Setting::Drive(Drive::PushPull)]);
+
+ let mut map = SettingMap::new();
+ map.insert(GPIO.into(), Setting::Drive(Drive::OpenDrain));
+ lconfig.set_prop_override(map);
+
+ assert!(lconfig.prop_is_overridden(SettingKind::Drive, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::Drive, GPIO).unwrap(),
+ Setting::Drive(Drive::OpenDrain)
+ );
+
+ let mut map = SettingKindMap::new();
+ map.insert(GPIO.into(), SettingKind::Drive);
+ lconfig.clear_prop_override(map);
+ assert!(!lconfig.prop_is_overridden(SettingKind::Drive, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::Drive, GPIO).unwrap(),
+ Setting::Drive(Drive::PushPull)
+ );
+ }
+
+ #[test]
+ fn active_low() {
+ const GPIO: Offset = 4;
+ let mut lconfig = line::Config::new().unwrap();
+
+ lconfig.set_prop_default(&[Setting::ActiveLow(false)]);
+
+ let mut map = SettingMap::new();
+ map.insert(GPIO.into(), Setting::ActiveLow(true));
+ lconfig.set_prop_override(map);
+
+ assert!(lconfig.prop_is_overridden(SettingKind::ActiveLow, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::ActiveLow, GPIO).unwrap(),
+ Setting::ActiveLow(true)
+ );
+
+ let mut map = SettingKindMap::new();
+ map.insert(GPIO.into(), SettingKind::ActiveLow);
+ lconfig.clear_prop_override(map);
+ assert!(!lconfig.prop_is_overridden(SettingKind::ActiveLow, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::ActiveLow, GPIO).unwrap(),
+ Setting::ActiveLow(false)
+ );
+ }
+
+ #[test]
+ fn debounce_period() {
+ const GPIO: Offset = 5;
+ let mut lconfig = line::Config::new().unwrap();
+
+ lconfig.set_prop_default(&[Setting::DebouncePeriod(Duration::from_millis(5))]);
+
+ let mut map = SettingMap::new();
+ map.insert(
+ GPIO.into(),
+ Setting::DebouncePeriod(Duration::from_millis(3)),
+ );
+ lconfig.set_prop_override(map);
+
+ assert!(lconfig.prop_is_overridden(SettingKind::DebouncePeriod, GPIO));
+ assert_eq!(
+ lconfig
+ .prop_offset(SettingKind::DebouncePeriod, GPIO)
+ .unwrap(),
+ Setting::DebouncePeriod(Duration::from_millis(3))
+ );
+
+ let mut map = SettingKindMap::new();
+ map.insert(GPIO.into(), SettingKind::DebouncePeriod);
+ lconfig.clear_prop_override(map);
+ assert!(!lconfig.prop_is_overridden(SettingKind::DebouncePeriod, GPIO));
+ assert_eq!(
+ lconfig
+ .prop_offset(SettingKind::DebouncePeriod, GPIO)
+ .unwrap(),
+ Setting::DebouncePeriod(Duration::from_millis(5))
+ );
+ }
+
+ #[test]
+ fn event_clock() {
+ const GPIO: Offset = 6;
+ let mut lconfig = line::Config::new().unwrap();
+
+ lconfig.set_prop_default(&[Setting::EventClock(EventClock::Monotonic)]);
+
+ let mut map = SettingMap::new();
+ map.insert(GPIO.into(), Setting::EventClock(EventClock::Realtime));
+ lconfig.set_prop_override(map);
+
+ assert!(lconfig.prop_is_overridden(SettingKind::EventClock, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::EventClock, GPIO).unwrap(),
+ Setting::EventClock(EventClock::Realtime)
+ );
+
+ let mut map = SettingKindMap::new();
+ map.insert(GPIO.into(), SettingKind::EventClock);
+ lconfig.clear_prop_override(map);
+ assert!(!lconfig.prop_is_overridden(SettingKind::EventClock, GPIO));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::EventClock, GPIO).unwrap(),
+ Setting::EventClock(EventClock::Monotonic)
+ );
+ }
+
+ #[test]
+ fn output_value() {
+ const GPIO: Offset = 0;
+ let mut lconfig = line::Config::new().unwrap();
+
+ lconfig.set_prop_default(&[Setting::OutputValue(Value::InActive)]);
+
+ let mut map = SettingMap::new();
+ map.insert(GPIO.into(), Setting::OutputValue(Value::Active));
+ lconfig.set_prop_override(map);
+
+ let mut map = ValueMap::new();
+ map.insert(1, Value::Active);
+ map.insert(2, Value::Active);
+ map.insert(8, Value::Active);
+ lconfig.set_output_values(map).unwrap();
+
+ for line in [0, 1, 2, 8] {
+ assert!(lconfig.prop_is_overridden(SettingKind::OutputValue, line));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::OutputValue, line).unwrap(),
+ Setting::OutputValue(Value::Active)
+ );
+
+ let mut map = SettingKindMap::new();
+ map.insert(line.into(), SettingKind::OutputValue);
+ lconfig.clear_prop_override(map);
+ assert!(!lconfig.prop_is_overridden(SettingKind::OutputValue, line));
+ assert_eq!(
+ lconfig.prop_offset(SettingKind::OutputValue, GPIO).unwrap(),
+ Setting::OutputValue(Value::InActive)
+ );
+ }
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/tests/line_info.rs b/bindings/rust/libgpiod/tests/line_info.rs
new file mode 100644
index 000000000000..54a8a1133e89
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/line_info.rs
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+mod common;
+
+mod line_info {
+ use libc::EINVAL;
+ use std::time::Duration;
+
+ use vmm_sys_util::errno::Error as Errno;
+
+ use crate::common::*;
+ use gpiosim::Sim;
+ use gpiosim::{GPIOSIM_HOG_DIR_INPUT, GPIOSIM_HOG_DIR_OUTPUT_HIGH, GPIOSIM_HOG_DIR_OUTPUT_LOW};
+ use libgpiod::{
+ chip::Chip, Bias, Direction, Drive, Edge, Error as ChipError, EventClock, OperationType,
+ };
+
+ const NGPIO: u64 = 8;
+
+ mod properties {
+ use super::*;
+
+ #[test]
+ fn default() {
+ let sim = Sim::new(Some(NGPIO), None, false).unwrap();
+ sim.set_line_name(4, "four").unwrap();
+ sim.hog_line(4, "hog4", GPIOSIM_HOG_DIR_OUTPUT_LOW as i32)
+ .unwrap();
+ sim.enable().unwrap();
+
+ let chip = Chip::open(&sim.dev_path()).unwrap();
+
+ let info4 = chip.line_info(4).unwrap();
+ assert_eq!(info4.offset(), 4);
+ assert_eq!(info4.name().unwrap(), "four");
+ assert!(info4.is_used());
+ assert_eq!(info4.consumer().unwrap(), "hog4");
+ assert_eq!(info4.direction().unwrap(), Direction::Output);
+ assert!(!info4.is_active_low());
+ assert_eq!(info4.bias().unwrap(), None);
+ assert_eq!(info4.drive().unwrap(), Drive::PushPull);
+ assert_eq!(info4.edge_detection().unwrap(), None);
+ assert_eq!(info4.event_clock().unwrap(), EventClock::Monotonic);
+ assert!(!info4.is_debounced());
+ assert_eq!(info4.debounce_period(), Duration::from_millis(0));
+
+ assert_eq!(
+ chip.line_info(NGPIO as u32).unwrap_err(),
+ ChipError::OperationFailed(OperationType::ChipGetLineInfo, Errno::new(EINVAL))
+ );
+ }
+
+ #[test]
+ fn name_and_offset() {
+ let sim = Sim::new(Some(NGPIO), None, false).unwrap();
+
+ // Line 0 has no name
+ for i in 1..NGPIO {
+ sim.set_line_name(i as u32, &i.to_string()).unwrap();
+ }
+ sim.enable().unwrap();
+
+ let chip = Chip::open(&sim.dev_path()).unwrap();
+ let info = chip.line_info(0).unwrap();
+
+ assert_eq!(info.offset(), 0);
+ assert_eq!(
+ info.name().unwrap_err(),
+ ChipError::NullString("GPIO line's name")
+ );
+
+ for i in 1..NGPIO {
+ let info = chip.line_info(i as u32).unwrap();
+
+ assert_eq!(info.offset(), i as u32);
+ assert_eq!(info.name().unwrap(), &i.to_string());
+ }
+ }
+
+ #[test]
+ fn is_used() {
+ let sim = Sim::new(Some(NGPIO), None, false).unwrap();
+ sim.hog_line(0, "hog", GPIOSIM_HOG_DIR_OUTPUT_HIGH as i32)
+ .unwrap();
+ sim.enable().unwrap();
+
+ let chip = Chip::open(&sim.dev_path()).unwrap();
+
+ let info = chip.line_info(0).unwrap();
+ assert!(info.is_used());
+
+ let info = chip.line_info(1).unwrap();
+ assert!(!info.is_used());
+ }
+
+ #[test]
+ fn consumer() {
+ let sim = Sim::new(Some(NGPIO), None, false).unwrap();
+ sim.hog_line(0, "hog", GPIOSIM_HOG_DIR_OUTPUT_HIGH as i32)
+ .unwrap();
+ sim.enable().unwrap();
+
+ let chip = Chip::open(&sim.dev_path()).unwrap();
+
+ let info = chip.line_info(0).unwrap();
+ assert_eq!(info.consumer().unwrap(), "hog");
+
+ let info = chip.line_info(1).unwrap();
+ assert_eq!(
+ info.consumer().unwrap_err(),
+ ChipError::NullString("GPIO line's consumer name")
+ );
+ }
+
+ #[test]
+ fn direction() {
+ let sim = Sim::new(Some(NGPIO), None, false).unwrap();
+ sim.hog_line(0, "hog", GPIOSIM_HOG_DIR_INPUT as i32)
+ .unwrap();
+ sim.hog_line(1, "hog", GPIOSIM_HOG_DIR_OUTPUT_HIGH as i32)
+ .unwrap();
+ sim.hog_line(2, "hog", GPIOSIM_HOG_DIR_OUTPUT_LOW as i32)
+ .unwrap();
+ sim.enable().unwrap();
+
+ let chip = Chip::open(&sim.dev_path()).unwrap();
+
+ let info = chip.line_info(0).unwrap();
+ assert_eq!(info.direction().unwrap(), Direction::Input);
+
+ let info = chip.line_info(1).unwrap();
+ assert_eq!(info.direction().unwrap(), Direction::Output);
+
+ let info = chip.line_info(2).unwrap();
+ assert_eq!(info.direction().unwrap(), Direction::Output);
+ }
+
+ #[test]
+ fn bias() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.bias().unwrap(), None);
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_bias(Direction::Input, Some(Bias::PullUp));
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.bias().unwrap(), Some(Bias::PullUp));
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_bias(Direction::Input, Some(Bias::PullDown));
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.bias().unwrap(), Some(Bias::PullDown));
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_bias(Direction::Input, Some(Bias::Disabled));
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.bias().unwrap(), Some(Bias::Disabled));
+ }
+
+ #[test]
+ fn drive() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.drive().unwrap(), Drive::PushPull);
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_drive(Direction::Input, Drive::PushPull);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.drive().unwrap(), Drive::PushPull);
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_drive(Direction::Output, Drive::OpenDrain);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.drive().unwrap(), Drive::OpenDrain);
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_drive(Direction::Output, Drive::OpenSource);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.drive().unwrap(), Drive::OpenSource);
+ }
+
+ #[test]
+ fn edge() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.edge_detection().unwrap(), None);
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_edge(Some(Direction::Input), Some(Edge::Both));
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.edge_detection().unwrap(), Some(Edge::Both));
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_edge(Some(Direction::Input), Some(Edge::Rising));
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.edge_detection().unwrap(), Some(Edge::Rising));
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_edge(Some(Direction::Input), Some(Edge::Falling));
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.edge_detection().unwrap(), Some(Edge::Falling));
+ }
+
+ #[test]
+ fn clock() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.event_clock().unwrap(), EventClock::Monotonic);
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_clock(EventClock::Monotonic);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.event_clock().unwrap(), EventClock::Monotonic);
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_clock(EventClock::Realtime);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.event_clock().unwrap(), EventClock::Realtime);
+ }
+
+ #[test]
+ fn debounce() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert!(!info.is_debounced());
+ assert_eq!(info.debounce_period(), Duration::from_millis(0));
+
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_debounce(Duration::from_millis(100));
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert!(info.is_debounced());
+ assert_eq!(info.debounce_period(), Duration::from_millis(100));
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/tests/line_request.rs b/bindings/rust/libgpiod/tests/line_request.rs
new file mode 100644
index 000000000000..bcbc4fb5b711
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/line_request.rs
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+mod common;
+
+mod line_request {
+ use libc::{E2BIG, EBUSY, EINVAL};
+ use std::time::Duration;
+
+ use vmm_sys_util::errno::Error as Errno;
+
+ use crate::common::*;
+ use gpiosim::{
+ GPIOSIM_PULL_DOWN, GPIOSIM_PULL_UP, GPIOSIM_VALUE_ACTIVE, GPIOSIM_VALUE_INACTIVE,
+ };
+ use libgpiod::{
+ line, Bias, Direction, Drive, Edge, Error as ChipError, EventClock, Offset, OperationType,
+ Setting, SettingMap, Value, ValueMap,
+ };
+
+ const NGPIO: u64 = 8;
+
+ mod invalid_arguments {
+ use super::*;
+
+ #[test]
+ fn no_offsets() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.lconfig_val_raw();
+
+ assert_eq!(
+ config.request_lines().unwrap_err(),
+ ChipError::OperationFailed(OperationType::LineRequest, Errno::new(EINVAL))
+ );
+ }
+
+ #[test]
+ fn duplicate_offsets() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[2, 0, 0, 4]);
+ config.lconfig_val_raw();
+
+ assert_eq!(
+ config.request_lines().unwrap_err(),
+ ChipError::OperationFailed(OperationType::LineRequest, Errno::new(EBUSY))
+ );
+ }
+
+ #[test]
+ fn out_of_bound_offsets() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[2, 0, 8, 4]);
+ config.lconfig_val_raw();
+
+ assert_eq!(
+ config.request_lines().unwrap_err(),
+ ChipError::OperationFailed(OperationType::LineRequest, Errno::new(EINVAL))
+ );
+ }
+
+ #[test]
+ fn dir_out_edge_failure() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_edge(Some(Direction::Output), Some(Edge::Both));
+
+ assert_eq!(
+ config.request_lines().unwrap_err(),
+ ChipError::OperationFailed(OperationType::LineRequest, Errno::new(EINVAL))
+ );
+ }
+ }
+
+ mod verify {
+ use super::*;
+
+ #[test]
+ fn custom_consumer() {
+ const GPIO: Offset = 2;
+ const CONSUMER: &str = "foobar";
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[GPIO]);
+ config.rconfig_set_consumer(CONSUMER);
+ config.lconfig_val_raw();
+ config.request_lines().unwrap();
+
+ let info = config.chip().line_info(GPIO).unwrap();
+
+ assert!(info.is_used());
+ assert_eq!(info.consumer().unwrap(), CONSUMER);
+ }
+
+ #[test]
+ fn empty_consumer() {
+ const GPIO: Offset = 2;
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[GPIO]);
+ config.lconfig_val_raw();
+ config.request_lines().unwrap();
+
+ let info = config.chip().line_info(GPIO).unwrap();
+
+ assert!(info.is_used());
+ assert_eq!(info.consumer().unwrap(), "?");
+ }
+
+ #[test]
+ fn read_values() {
+ let offsets = [7, 1, 0, 6, 2];
+ let pulls = [
+ GPIOSIM_PULL_UP,
+ GPIOSIM_PULL_UP,
+ GPIOSIM_PULL_DOWN,
+ GPIOSIM_PULL_UP,
+ GPIOSIM_PULL_DOWN,
+ ];
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.set_pull(&offsets, &pulls);
+ config.rconfig_set_offsets(&offsets);
+ config.lconfig_val(Some(Direction::Input), None, None);
+ config.request_lines().unwrap();
+
+ let request = config.request();
+
+ // Single values read properly
+ assert_eq!(request.value(7).unwrap(), Value::Active);
+
+ // Values read properly
+ let map = request.values().unwrap();
+ for i in 0..offsets.len() {
+ assert_eq!(
+ *map.get(offsets[i].into()).unwrap(),
+ match pulls[i] {
+ GPIOSIM_PULL_DOWN => Value::InActive,
+ _ => Value::Active,
+ }
+ );
+ }
+
+ // Subset of values read properly
+ let map = request.values_subset(&[2, 0, 6]).unwrap();
+ assert_eq!(*map.get(2).unwrap(), Value::InActive);
+ assert_eq!(*map.get(0).unwrap(), Value::InActive);
+ assert_eq!(*map.get(6).unwrap(), Value::Active);
+
+ // Value read properly after reconfigure
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[Setting::ActiveLow(true)]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ assert_eq!(request.value(7).unwrap(), Value::InActive);
+ }
+
+ #[test]
+ fn set_output_values() {
+ let offsets = [0, 1, 3, 4];
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&offsets);
+ config.lconfig_val(
+ Some(Direction::Output),
+ Some(Value::Active),
+ Some((4, Value::InActive)),
+ );
+ config.request_lines().unwrap();
+
+ assert_eq!(config.sim().val(0).unwrap(), GPIOSIM_VALUE_ACTIVE);
+ assert_eq!(config.sim().val(1).unwrap(), GPIOSIM_VALUE_ACTIVE);
+ assert_eq!(config.sim().val(3).unwrap(), GPIOSIM_VALUE_ACTIVE);
+
+ // Overriden
+ assert_eq!(config.sim().val(4).unwrap(), GPIOSIM_VALUE_INACTIVE);
+
+ // Default
+ assert_eq!(config.sim().val(2).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ }
+
+ #[test]
+ fn update_output_values() {
+ let offsets = [0, 1, 3, 4];
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&offsets);
+ config.lconfig_val(Some(Direction::Output), Some(Value::InActive), None);
+ config.request_lines().unwrap();
+ let request = config.request();
+
+ // Set single value
+ request.set_value(1, Value::Active).unwrap();
+ assert_eq!(config.sim().val(0).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(1).unwrap(), GPIOSIM_VALUE_ACTIVE);
+ assert_eq!(config.sim().val(3).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(4).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ request.set_value(1, Value::InActive).unwrap();
+ assert_eq!(config.sim().val(1).unwrap(), GPIOSIM_VALUE_INACTIVE);
+
+ // Set values of subset
+ let mut map = ValueMap::new();
+ map.insert(4, Value::Active);
+ map.insert(3, Value::Active);
+ request.set_values_subset(map).unwrap();
+ assert_eq!(config.sim().val(0).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(1).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(3).unwrap(), GPIOSIM_VALUE_ACTIVE);
+ assert_eq!(config.sim().val(4).unwrap(), GPIOSIM_VALUE_ACTIVE);
+
+ let mut map = ValueMap::new();
+ map.insert(4, Value::InActive);
+ map.insert(3, Value::InActive);
+ request.set_values_subset(map).unwrap();
+ assert_eq!(config.sim().val(3).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(4).unwrap(), GPIOSIM_VALUE_INACTIVE);
+
+ // Set all values
+ request
+ .set_values(&[
+ Value::Active,
+ Value::InActive,
+ Value::Active,
+ Value::InActive,
+ ])
+ .unwrap();
+ assert_eq!(config.sim().val(0).unwrap(), GPIOSIM_VALUE_ACTIVE);
+ assert_eq!(config.sim().val(1).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(3).unwrap(), GPIOSIM_VALUE_ACTIVE);
+ assert_eq!(config.sim().val(4).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ request
+ .set_values(&[
+ Value::InActive,
+ Value::InActive,
+ Value::InActive,
+ Value::InActive,
+ ])
+ .unwrap();
+ assert_eq!(config.sim().val(0).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(1).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(3).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ assert_eq!(config.sim().val(4).unwrap(), GPIOSIM_VALUE_INACTIVE);
+ }
+
+ #[test]
+ fn set_bias() {
+ let offsets = [3];
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&offsets);
+ config.lconfig_bias(Direction::Input, Some(Bias::PullUp));
+ config.request_lines().unwrap();
+ config.request();
+
+ // Set single value
+ assert_eq!(config.sim().val(3).unwrap(), GPIOSIM_VALUE_ACTIVE);
+ }
+
+ #[test]
+ fn no_events() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.lconfig_edge(None, Some(Edge::Both));
+ config.request_lines().unwrap();
+
+ // No events available
+ assert!(!config
+ .request()
+ .wait_edge_event(Some(Duration::from_millis(100)))
+ .unwrap());
+ }
+ }
+
+ mod reconfigure {
+ use super::*;
+
+ #[test]
+ fn e2big() {
+ let mut config = TestConfig::new(16).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+
+ let request = config.request();
+
+ // Reconfigure
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[Setting::Direction(Direction::Input)]);
+
+ let mut map = SettingMap::new();
+
+ // The uAPI config has only 10 attribute slots, this should pass.
+ for offset in 0..10 {
+ map.insert(
+ offset,
+ Setting::DebouncePeriod(Duration::from_millis(100 + offset)),
+ );
+ }
+
+ lconfig.set_prop_override(map.clone());
+ assert!(request.reconfigure_lines(&lconfig).is_ok());
+
+ // The uAPI config has only 10 attribute slots, and this is the 11th entry.
+ // This should fail with E2BIG.
+ map.insert(11, Setting::DebouncePeriod(Duration::from_millis(100 + 11)));
+ lconfig.set_prop_override(map.clone());
+ assert_eq!(
+ request.reconfigure_lines(&lconfig).unwrap_err(),
+ ChipError::OperationFailed(
+ OperationType::LineRequestReconfigLines,
+ Errno::new(E2BIG),
+ )
+ );
+ }
+
+ #[test]
+ fn bias() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.bias().unwrap(), None);
+
+ let request = config.request();
+
+ // Reconfigure
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Input),
+ Setting::Bias(Some(Bias::PullUp)),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.bias().unwrap(), Some(Bias::PullUp));
+
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Input),
+ Setting::Bias(Some(Bias::PullDown)),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.bias().unwrap(), Some(Bias::PullDown));
+
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Input),
+ Setting::Bias(Some(Bias::Disabled)),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.bias().unwrap(), Some(Bias::Disabled));
+ }
+
+ #[test]
+ fn drive() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.drive().unwrap(), Drive::PushPull);
+
+ let request = config.request();
+
+ // Reconfigure
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Input),
+ Setting::Drive(Drive::PushPull),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.drive().unwrap(), Drive::PushPull);
+
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Output),
+ Setting::Drive(Drive::OpenDrain),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.drive().unwrap(), Drive::OpenDrain);
+
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Output),
+ Setting::Drive(Drive::OpenSource),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.drive().unwrap(), Drive::OpenSource);
+ }
+
+ #[test]
+ fn edge() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.edge_detection().unwrap(), None);
+
+ let request = config.request();
+
+ // Reconfigure
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Input),
+ Setting::EdgeDetection(Some(Edge::Both)),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.edge_detection().unwrap(), Some(Edge::Both));
+
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Input),
+ Setting::EdgeDetection(Some(Edge::Rising)),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.edge_detection().unwrap(), Some(Edge::Rising));
+
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Input),
+ Setting::EdgeDetection(Some(Edge::Falling)),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.edge_detection().unwrap(), Some(Edge::Falling));
+ }
+
+ #[test]
+ fn event_clock() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.event_clock().unwrap(), EventClock::Monotonic);
+
+ let request = config.request();
+
+ // Reconfigure
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[Setting::EventClock(EventClock::Monotonic)]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.event_clock().unwrap(), EventClock::Monotonic);
+
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[Setting::EventClock(EventClock::Realtime)]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert_eq!(info.event_clock().unwrap(), EventClock::Realtime);
+ }
+
+ #[test]
+ fn debounce() {
+ let mut config = TestConfig::new(NGPIO).unwrap();
+ config.rconfig_set_offsets(&[0]);
+ config.request_lines().unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert!(!info.is_debounced());
+ assert_eq!(info.debounce_period(), Duration::from_millis(0));
+
+ let request = config.request();
+
+ // Reconfigure
+ let mut lconfig = line::Config::new().unwrap();
+ lconfig.set_prop_default(&[
+ Setting::Direction(Direction::Input),
+ Setting::DebouncePeriod(Duration::from_millis(100)),
+ ]);
+ request.reconfigure_lines(&lconfig).unwrap();
+ let info = config.chip().line_info(0).unwrap();
+ assert!(info.is_debounced());
+ assert_eq!(info.debounce_period(), Duration::from_millis(100));
+ }
+ }
+}
diff --git a/bindings/rust/libgpiod/tests/request_config.rs b/bindings/rust/libgpiod/tests/request_config.rs
new file mode 100644
index 000000000000..1d2f9468ca4c
--- /dev/null
+++ b/bindings/rust/libgpiod/tests/request_config.rs
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
+//
+// Copyright 2022 Linaro Ltd. All Rights Reserved.
+// Viresh Kumar <viresh.kumar@linaro.org>
+
+mod common;
+
+mod request_config {
+ use vmm_sys_util::errno::Error as Errno;
+
+ use libgpiod::{request, Error as ChipError, OperationType};
+
+ mod verify {
+ use super::*;
+
+ #[test]
+ fn default() {
+ let rconfig = request::Config::new().unwrap();
+
+ assert_eq!(rconfig.offsets().len(), 0);
+ assert_eq!(rconfig.event_buffer_size(), 0);
+ assert_eq!(
+ rconfig.consumer().unwrap_err(),
+ ChipError::OperationFailed(OperationType::RequestConfigGetConsumer, Errno::new(0))
+ );
+ }
+
+ #[test]
+ fn initialized() {
+ let offsets = [0, 1, 2, 3];
+ const CONSUMER: &str = "foobar";
+ let rconfig = request::Config::new().unwrap();
+ rconfig.set_consumer(CONSUMER);
+ rconfig.set_offsets(&offsets);
+ rconfig.set_event_buffer_size(64);
+
+ assert_eq!(rconfig.offsets(), offsets);
+ assert_eq!(rconfig.event_buffer_size(), 64);
+ assert_eq!(rconfig.consumer().unwrap(), CONSUMER);
+ }
+ }
+}
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH V5 8/8] libgpiod: Integrate building of rust bindings with make
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
` (6 preceding siblings ...)
2022-08-02 12:18 ` [PATCH V5 7/8] libgpiod: Add rust tests Viresh Kumar
@ 2022-08-02 12:18 ` Viresh Kumar
2022-08-05 14:25 ` [PATCH V5 0/8] libgpiod: Add Rust bindings Bartosz Golaszewski
8 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-02 12:18 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Kent Gibson
Cc: Viresh Kumar, Vincent Guittot, linux-gpio, Miguel Ojeda,
Wedson Almeida Filho, Alex Bennée, stratos-dev, Gerard Ryan
Lets make build rust bindings as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
README | 8 +++++---
TODO | 8 --------
bindings/Makefile.am | 6 ++++++
bindings/rust/Makefile.am | 18 ++++++++++++++++++
configure.ac | 16 ++++++++++++++++
5 files changed, 45 insertions(+), 11 deletions(-)
create mode 100644 bindings/rust/Makefile.am
diff --git a/README b/README
index 814a0f161fd2..68b5d69f9b66 100644
--- a/README
+++ b/README
@@ -119,9 +119,9 @@ TOOLS
BINDINGS
--------
-High-level, object-oriented bindings for C++ and python3 are provided. They
-can be enabled by passing --enable-bindings-cxx and --enable-bindings-python
-arguments respectively to configure.
+High-level, object-oriented bindings for C++, python3 and Rust are provided.
+They can be enabled by passing --enable-bindings-cxx, --enable-bindings-python
+and --enable-bindings-rust arguments respectively to configure.
C++ bindings require C++11 support and autoconf-archive collection if building
from git.
@@ -132,6 +132,8 @@ the PYTHON_CPPFLAGS and PYTHON_LIBS variables in order to point the build
system to the correct locations. During native builds, the configure script
can auto-detect the location of the development files.
+Rust bindings require cargo support.
+
TESTING
-------
diff --git a/TODO b/TODO
index 8bb4d8f3ad56..cf4fd7b4a962 100644
--- a/TODO
+++ b/TODO
@@ -28,14 +28,6 @@ and is partially functional.
----------
-* implement rust bindings
-
-With Rust gaining popularity as a low-level system's language and the
-possibility of it making its way into the linux kernel, it's probably time to
-provide Rust bindings to libgpiod as part of the project.
-
-----------
-
* implement a simple daemon for controlling GPIOs in C together with a client
program
diff --git a/bindings/Makefile.am b/bindings/Makefile.am
index 8f8c762f254f..004ae23dbc58 100644
--- a/bindings/Makefile.am
+++ b/bindings/Makefile.am
@@ -14,3 +14,9 @@ if WITH_BINDINGS_PYTHON
SUBDIRS += python
endif
+
+if WITH_BINDINGS_RUST
+
+SUBDIRS += rust
+
+endif
diff --git a/bindings/rust/Makefile.am b/bindings/rust/Makefile.am
new file mode 100644
index 000000000000..79a52bc691ae
--- /dev/null
+++ b/bindings/rust/Makefile.am
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# SPDX-FileCopyrightText: 2022 Viresh Kumar <viresh.kumar@linaro.org>
+
+command = cargo build --release --lib
+
+if WITH_TESTS
+command += --tests
+endif
+
+if WITH_EXAMPLES
+command += --examples
+endif
+
+all:
+ $(command)
+
+clean:
+ cargo clean
diff --git a/configure.ac b/configure.ac
index ab03673589e9..8458f734a606 100644
--- a/configure.ac
+++ b/configure.ac
@@ -211,6 +211,21 @@ then
[AC_SUBST(PYTHON_LIBS, [`$PYTHON-config --libs`])])
fi
+AC_ARG_ENABLE([bindings-rust],
+ [AS_HELP_STRING([--enable-bindings-rust],[enable rust bindings [default=no]])],
+ [if test "x$enableval" = xyes; then with_bindings_rust=true; fi],
+ [with_bindings_rust=false])
+AM_CONDITIONAL([WITH_BINDINGS_RUST], [test "x$with_bindings_rust" = xtrue])
+
+if test "x$with_bindings_rust" = xtrue
+then
+ AC_CHECK_PROG([has_cargo], [cargo], [true], [false])
+ if test "x$has_cargo" = xfalse
+ then
+ AC_MSG_ERROR([cargo not found - needed for rust bindings])
+ fi
+fi
+
AC_CHECK_PROG([has_doxygen], [doxygen], [true], [false])
AM_CONDITIONAL([HAS_DOXYGEN], [test "x$has_doxygen" = xtrue])
if test "x$has_doxygen" = xfalse
@@ -245,6 +260,7 @@ AC_CONFIG_FILES([Makefile
bindings/python/Makefile
bindings/python/examples/Makefile
bindings/python/tests/Makefile
+ bindings/rust/Makefile
man/Makefile])
AC_OUTPUT
--
2.31.1.272.g89b43f80a514
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V5 0/8] libgpiod: Add Rust bindings
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
` (7 preceding siblings ...)
2022-08-02 12:18 ` [PATCH V5 8/8] libgpiod: Integrate building of rust bindings with make Viresh Kumar
@ 2022-08-05 14:25 ` Bartosz Golaszewski
2022-08-09 5:59 ` Viresh Kumar
8 siblings, 1 reply; 11+ messages in thread
From: Bartosz Golaszewski @ 2022-08-05 14:25 UTC (permalink / raw)
To: Viresh Kumar
Cc: Linus Walleij, Kent Gibson, Vincent Guittot,
open list:GPIO SUBSYSTEM, Miguel Ojeda, Wedson Almeida Filho,
Alex Bennée, stratos-dev, Gerard Ryan
On Tue, Aug 2, 2022 at 2:18 PM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> Hello,
>
> Here is another version of rust bindings for libgpiod v2.0, based of the
> next/libgpiod-2.0.
>
> Pushed here:
>
> https://github.com/vireshk/libgpiod master
>
> Kent, I hope I haven't missed any of your comments, there were too many of them.
> Thanks for your review.
>
Hey Viresh et al.
Thank you for your hard work on that, we'll get it merged eventually. :)
I'm just letting you know that I am following the discussion. I sadly
don't know Rust well enough to be able to review the patches in detail
but from looking at the code, I can tell that you followed the C++
bindings in how line-config works. Looking at how line configuration
works in C++ and Rust bindings and how I struggle to translate it well
to Python, I decided to take one step back and revisit the line config
in core C API.
My goal is to tweak the data model in a way that - while making the C
API slightly more complex - will allow high-level bindings to expose
more elegant interfaces using mutator chaining (like what is customary
in Rust and what is also possible and often used in C++ and Python)
while reducing the usage of quasi dynamic typing using std::any in
C++.
I wanted to post my work this week but didn't manage to finish it and
now I'm leaving for vacation. If you want to take a look, the C part
is done and available here:
https://github.com/brgl/libgpiod-private/tree/topic/rebuild-line-config.
C++ part is in progress.
I hope you won't mind some more reworks to the Rust API but I'm sure
it will be much better in the end and more like what Rust libraries
typically look like.
Bart
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH V5 0/8] libgpiod: Add Rust bindings
2022-08-05 14:25 ` [PATCH V5 0/8] libgpiod: Add Rust bindings Bartosz Golaszewski
@ 2022-08-09 5:59 ` Viresh Kumar
0 siblings, 0 replies; 11+ messages in thread
From: Viresh Kumar @ 2022-08-09 5:59 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Linus Walleij, Kent Gibson, Vincent Guittot,
open list:GPIO SUBSYSTEM, Miguel Ojeda, Wedson Almeida Filho,
Alex Bennée, stratos-dev, Gerard Ryan
On 05-08-22, 16:25, Bartosz Golaszewski wrote:
> Thank you for your hard work on that, we'll get it merged eventually. :)
:)
> I'm just letting you know that I am following the discussion. I sadly
> don't know Rust well enough to be able to review the patches in detail
> but from looking at the code, I can tell that you followed the C++
> bindings in how line-config works.
Not really. I wrote the wrappers based on include/gpiod.h only and
didn't look at C++ bindings for them.
The only point where I looked at C++ bindings was when I was writing
examples and tests. I am not a Python guy, so the only thing left was
C++ :)
> Looking at how line configuration
> works in C++ and Rust bindings and how I struggle to translate it well
> to Python, I decided to take one step back and revisit the line config
> in core C API.
>
> My goal is to tweak the data model in a way that - while making the C
> API slightly more complex - will allow high-level bindings to expose
> more elegant interfaces using mutator chaining (like what is customary
> in Rust and what is also possible and often used in C++ and Python)
> while reducing the usage of quasi dynamic typing using std::any in
> C++.
Makes sense.
> I wanted to post my work this week but didn't manage to finish it and
> now I'm leaving for vacation. If you want to take a look, the C part
> is done and available here:
> https://github.com/brgl/libgpiod-private/tree/topic/rebuild-line-config.
> C++ part is in progress.
I did have a look at this yesterday. I would like make changes towards
this once this is merged, so I don't need to do it again.
> I hope you won't mind some more reworks to the Rust API
Not at all.
> but I'm sure
> it will be much better in the end and more like what Rust libraries
> typically look like.
I think that the C API is still getting worked up at the moment and
the modifications (at API level) won't stop after this too. We will
see more improvements going forward, which is the right thing to do in
order to get a robust and more user friendly API out of it.
I worry if this will keep happening and keep pushing the Rust patches
to be merged to libgpiod. I am fine to resend the patches on top of
the rebuild-line-config changes as well though.
FWIW, I will still be around after this is merged, to write/review
Rust patches based on any changes to the C API. :)
Enjoy your vacation.
--
viresh
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2022-08-09 6:00 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-02 12:18 [PATCH V5 0/8] libgpiod: Add Rust bindings Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 1/8] libgpiod: Add libgpiod-sys rust crate Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 2/8] libgpiod-sys: Add pre generated rust bindings Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 3/8] libgpiod: Add rust wrapper crate Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 4/8] libgpiod: Add rust examples Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 5/8] libgpiod: Add gpiosim rust crate Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 6/8] gpiosim: Add pre generated rust bindings Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 7/8] libgpiod: Add rust tests Viresh Kumar
2022-08-02 12:18 ` [PATCH V5 8/8] libgpiod: Integrate building of rust bindings with make Viresh Kumar
2022-08-05 14:25 ` [PATCH V5 0/8] libgpiod: Add Rust bindings Bartosz Golaszewski
2022-08-09 5:59 ` Viresh Kumar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.