* [refpolicy] [PATCH] Fix parallel build of the policy
@ 2014-02-18 23:26 Nicolas Iooss
2014-03-06 13:41 ` Christopher J. PeBenito
2014-03-14 12:50 ` Christopher J. PeBenito
0 siblings, 2 replies; 4+ messages in thread
From: Nicolas Iooss @ 2014-02-18 23:26 UTC (permalink / raw)
To: refpolicy
Before this commit, "make -j2" would execute twice at the same time the rules
written to build tmp/all_post.conf because these rules were applied every time
tmp/all_post.conf, tmp/all_attrs_types.conf and tmp/only_te_rules.conf needed
to be built. However, executing twice in parallel such line is buggy:
$(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> \
tmpdir)/all_post.conf
This is why "make" reports following error for parallel builds:
Compiling refpolicy-patched base module
/usr/bin/checkmodule -M -U allow base.conf -o tmp/base.mod
/usr/bin/checkmodule: loading policy configuration from base.conf
policy/modules/kernel/ubac.te":710:ERROR 'syntax error' at token
'fs_use_trans' on line 26520:
fs_use_trans devtmpfs system_u:object_r:device_t:s0;
/usr/bin/checkmodule: error(s) encountered while parsing configuration
make: *** [tmp/base.mod] Error 1
This commit fixes this bug by splitting the rules in 3 different targets, in
both monolithic and modular builds.
---
Rules.modular | 24 ++++++++++++++----------
Rules.monolithic | 24 ++++++++++++++----------
2 files changed, 28 insertions(+), 20 deletions(-)
diff --git a/Rules.modular b/Rules.modular
index 58e94da..2c5f5ff 100644
--- a/Rules.modular
+++ b/Rules.modular
@@ -157,17 +157,21 @@ $(tmpdir)/post_te_files.conf: $(m4support) $(tmpdir)/generated_definitions.conf
# extract attributes and put them first. extract post te stuff
# like genfscon and put last.
-$(tmpdir)/all_attrs_types.conf $(tmpdir)/only_te_rules.conf $(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
- $(verbose) $(get_type_attr_decl) $(tmpdir)/all_te_files.conf | $(SORT) > $(tmpdir)/all_attrs_types.conf
- $(verbose) cat $(tmpdir)/post_te_files.conf > $(tmpdir)/all_post.conf
+$(tmpdir)/all_attrs_types.conf: $(tmpdir)/all_te_files.conf
+ $(verbose) $(get_type_attr_decl) $^ | $(SORT) > $@
+
+$(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
+ $(verbose) cat $(tmpdir)/post_te_files.conf > $@
# these have to run individually because order matters:
- $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(comment_move_decl) $(tmpdir)/all_te_files.conf > $(tmpdir)/only_te_rules.conf
+ $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $@ || true
+
+$(tmpdir)/only_te_rules.conf: $(tmpdir)/all_te_files.conf
+ $(verbose) $(comment_move_decl) $^ > $@
########################################
#
diff --git a/Rules.monolithic b/Rules.monolithic
index 7e77c03..b635952 100644
--- a/Rules.monolithic
+++ b/Rules.monolithic
@@ -144,17 +144,21 @@ $(tmpdir)/post_te_files.conf: $(m4support) $(tmpdir)/generated_definitions.conf
# extract attributes and put them first. extract post te stuff
# like genfscon and put last.
-$(tmpdir)/all_attrs_types.conf $(tmpdir)/only_te_rules.conf $(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
- $(verbose) $(get_type_attr_decl) $(tmpdir)/all_te_files.conf | $(SORT) > $(tmpdir)/all_attrs_types.conf
- $(verbose) cat $(tmpdir)/post_te_files.conf > $(tmpdir)/all_post.conf
+$(tmpdir)/all_attrs_types.conf: $(tmpdir)/all_te_files.conf
+ $(verbose) $(get_type_attr_decl) $^ | $(SORT) > $@
+
+$(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
+ $(verbose) cat $(tmpdir)/post_te_files.conf > $@
# these have to run individually because order matters:
- $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
- $(verbose) $(comment_move_decl) $(tmpdir)/all_te_files.conf > $(tmpdir)/only_te_rules.conf
+ $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $@ || true
+ $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $@ || true
+
+$(tmpdir)/only_te_rules.conf: $(tmpdir)/all_te_files.conf
+ $(verbose) $(comment_move_decl) $^ > $@
########################################
#
--
1.8.5.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [refpolicy] [PATCH] Fix parallel build of the policy
2014-02-18 23:26 [refpolicy] [PATCH] Fix parallel build of the policy Nicolas Iooss
@ 2014-03-06 13:41 ` Christopher J. PeBenito
2014-03-06 20:05 ` Nicolas Iooss
2014-03-14 12:50 ` Christopher J. PeBenito
1 sibling, 1 reply; 4+ messages in thread
From: Christopher J. PeBenito @ 2014-03-06 13:41 UTC (permalink / raw)
To: refpolicy
On 02/18/2014 06:26 PM, Nicolas Iooss wrote:
> Before this commit, "make -j2" would execute twice at the same time the rules
> written to build tmp/all_post.conf because these rules were applied every time
> tmp/all_post.conf, tmp/all_attrs_types.conf and tmp/only_te_rules.conf needed
> to be built. However, executing twice in parallel such line is buggy:
>
> $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> \
> tmpdir)/all_post.conf
>
> This is why "make" reports following error for parallel builds:
>
> Compiling refpolicy-patched base module
> /usr/bin/checkmodule -M -U allow base.conf -o tmp/base.mod
> /usr/bin/checkmodule: loading policy configuration from base.conf
> policy/modules/kernel/ubac.te":710:ERROR 'syntax error' at token
> 'fs_use_trans' on line 26520:
> fs_use_trans devtmpfs system_u:object_r:device_t:s0;
>
> /usr/bin/checkmodule: error(s) encountered while parsing configuration
> make: *** [tmp/base.mod] Error 1
>
> This commit fixes this bug by splitting the rules in 3 different targets, in
> both monolithic and modular builds.
How much testing did you do to ensure there are no changes to the output files? It looks like its ok, but changing how the source files are constructed requires solid testing first.
> ---
> Rules.modular | 24 ++++++++++++++----------
> Rules.monolithic | 24 ++++++++++++++----------
> 2 files changed, 28 insertions(+), 20 deletions(-)
>
> diff --git a/Rules.modular b/Rules.modular
> index 58e94da..2c5f5ff 100644
> --- a/Rules.modular
> +++ b/Rules.modular
> @@ -157,17 +157,21 @@ $(tmpdir)/post_te_files.conf: $(m4support) $(tmpdir)/generated_definitions.conf
>
> # extract attributes and put them first. extract post te stuff
> # like genfscon and put last.
> -$(tmpdir)/all_attrs_types.conf $(tmpdir)/only_te_rules.conf $(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
> - $(verbose) $(get_type_attr_decl) $(tmpdir)/all_te_files.conf | $(SORT) > $(tmpdir)/all_attrs_types.conf
> - $(verbose) cat $(tmpdir)/post_te_files.conf > $(tmpdir)/all_post.conf
> +$(tmpdir)/all_attrs_types.conf: $(tmpdir)/all_te_files.conf
> + $(verbose) $(get_type_attr_decl) $^ | $(SORT) > $@
> +
> +$(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
> + $(verbose) cat $(tmpdir)/post_te_files.conf > $@
> # these have to run individually because order matters:
> - $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(comment_move_decl) $(tmpdir)/all_te_files.conf > $(tmpdir)/only_te_rules.conf
> + $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $@ || true
> +
> +$(tmpdir)/only_te_rules.conf: $(tmpdir)/all_te_files.conf
> + $(verbose) $(comment_move_decl) $^ > $@
>
> ########################################
> #
> diff --git a/Rules.monolithic b/Rules.monolithic
> index 7e77c03..b635952 100644
> --- a/Rules.monolithic
> +++ b/Rules.monolithic
> @@ -144,17 +144,21 @@ $(tmpdir)/post_te_files.conf: $(m4support) $(tmpdir)/generated_definitions.conf
>
> # extract attributes and put them first. extract post te stuff
> # like genfscon and put last.
> -$(tmpdir)/all_attrs_types.conf $(tmpdir)/only_te_rules.conf $(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
> - $(verbose) $(get_type_attr_decl) $(tmpdir)/all_te_files.conf | $(SORT) > $(tmpdir)/all_attrs_types.conf
> - $(verbose) cat $(tmpdir)/post_te_files.conf > $(tmpdir)/all_post.conf
> +$(tmpdir)/all_attrs_types.conf: $(tmpdir)/all_te_files.conf
> + $(verbose) $(get_type_attr_decl) $^ | $(SORT) > $@
> +
> +$(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
> + $(verbose) cat $(tmpdir)/post_te_files.conf > $@
> # these have to run individually because order matters:
> - $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(comment_move_decl) $(tmpdir)/all_te_files.conf > $(tmpdir)/only_te_rules.conf
> + $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $@ || true
> +
> +$(tmpdir)/only_te_rules.conf: $(tmpdir)/all_te_files.conf
> + $(verbose) $(comment_move_decl) $^ > $@
>
> ########################################
> #
>
--
Chris PeBenito
Tresys Technology, LLC
www.tresys.com | oss.tresys.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [refpolicy] [PATCH] Fix parallel build of the policy
2014-03-06 13:41 ` Christopher J. PeBenito
@ 2014-03-06 20:05 ` Nicolas Iooss
0 siblings, 0 replies; 4+ messages in thread
From: Nicolas Iooss @ 2014-03-06 20:05 UTC (permalink / raw)
To: refpolicy
2014-03-06 14:41 GMT+01:00 Christopher J. PeBenito <cpebenito@tresys.com>:
> On 02/18/2014 06:26 PM, Nicolas Iooss wrote:
> > Before this commit, "make -j2" would execute twice at the same time the
> rules
> > written to build tmp/all_post.conf because these rules were applied
> every time
> > tmp/all_post.conf, tmp/all_attrs_types.conf and tmp/only_te_rules.conf
> needed
> > to be built. However, executing twice in parallel such line is buggy:
> >
> > $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> \
> > tmpdir)/all_post.conf
> >
> > This is why "make" reports following error for parallel builds:
> >
> > Compiling refpolicy-patched base module
> > /usr/bin/checkmodule -M -U allow base.conf -o tmp/base.mod
> > /usr/bin/checkmodule: loading policy configuration from base.conf
> > policy/modules/kernel/ubac.te":710:ERROR 'syntax error' at token
> > 'fs_use_trans' on line 26520:
> > fs_use_trans devtmpfs system_u:object_r:device_t:s0;
> >
> > /usr/bin/checkmodule: error(s) encountered while parsing
> configuration
> > make: *** [tmp/base.mod] Error 1
> >
> > This commit fixes this bug by splitting the rules in 3 different
> targets, in
> > both monolithic and modular builds.
>
> How much testing did you do to ensure there are no changes to the output
> files? It looks like its ok, but changing how the source files are
> constructed requires solid testing first.
>
>
I've written the attached shell script to check that the built and
installed files are not changed by my patch. I've written how I used this
script in a comment at the beginning of the file, in hope anyone can
reproduce my tests and compare their results with mine.
On my system, "make bare && make -j4 conf" prints twice "Updating
policy/modules.conf and policy/booleans.conf" and "python -E
support/sedoctool.py -b policy/booleans.conf -m policy/modules.conf -x
doc/policy.xml". The patch does not change anything about it. That's why
I've used "make conf" and not "make -j$NJOBS conf" in my script.
Executing "make bare && make conf && make -j4 policy && make -j4 install
install-appconfig install-headers install-docs install-src" is also kind of
broken: the content of /etc/selinux/refpolicy/src/policy can't be predicted
after this. More precisely, I've seen
that /etc/selinux/refpolicy/src/policy/file_contexts and
/etc/selinux/refpolicy/src/policy/homedir_template may not be installed
when building the monolithic configuration. This is due to the fact that
"install-src" target in Makefile hasn't got any dependency and hence the
"cp -R . $(srcpath)/policy" command may be executed before all of the
generated files are created. That's why "make install-src" is also on a
distinct line in the script.
If that matters, I'm using make version 4.0.
Thanks
Nicolas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://oss.tresys.com/pipermail/refpolicy/attachments/20140306/b3387206/attachment.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: test-refpolicy-patch.sh
Type: application/x-sh
Size: 3292 bytes
Desc: not available
Url : http://oss.tresys.com/pipermail/refpolicy/attachments/20140306/b3387206/attachment.sh
^ permalink raw reply [flat|nested] 4+ messages in thread
* [refpolicy] [PATCH] Fix parallel build of the policy
2014-02-18 23:26 [refpolicy] [PATCH] Fix parallel build of the policy Nicolas Iooss
2014-03-06 13:41 ` Christopher J. PeBenito
@ 2014-03-14 12:50 ` Christopher J. PeBenito
1 sibling, 0 replies; 4+ messages in thread
From: Christopher J. PeBenito @ 2014-03-14 12:50 UTC (permalink / raw)
To: refpolicy
On 02/18/2014 06:26 PM, Nicolas Iooss wrote:
> Before this commit, "make -j2" would execute twice at the same time the rules
> written to build tmp/all_post.conf because these rules were applied every time
> tmp/all_post.conf, tmp/all_attrs_types.conf and tmp/only_te_rules.conf needed
> to be built. However, executing twice in parallel such line is buggy:
>
> $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> \
> tmpdir)/all_post.conf
>
> This is why "make" reports following error for parallel builds:
>
> Compiling refpolicy-patched base module
> /usr/bin/checkmodule -M -U allow base.conf -o tmp/base.mod
> /usr/bin/checkmodule: loading policy configuration from base.conf
> policy/modules/kernel/ubac.te":710:ERROR 'syntax error' at token
> 'fs_use_trans' on line 26520:
> fs_use_trans devtmpfs system_u:object_r:device_t:s0;
>
> /usr/bin/checkmodule: error(s) encountered while parsing configuration
> make: *** [tmp/base.mod] Error 1
>
> This commit fixes this bug by splitting the rules in 3 different targets, in
> both monolithic and modular builds.
Merged.
> ---
> Rules.modular | 24 ++++++++++++++----------
> Rules.monolithic | 24 ++++++++++++++----------
> 2 files changed, 28 insertions(+), 20 deletions(-)
>
> diff --git a/Rules.modular b/Rules.modular
> index 58e94da..2c5f5ff 100644
> --- a/Rules.modular
> +++ b/Rules.modular
> @@ -157,17 +157,21 @@ $(tmpdir)/post_te_files.conf: $(m4support) $(tmpdir)/generated_definitions.conf
>
> # extract attributes and put them first. extract post te stuff
> # like genfscon and put last.
> -$(tmpdir)/all_attrs_types.conf $(tmpdir)/only_te_rules.conf $(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
> - $(verbose) $(get_type_attr_decl) $(tmpdir)/all_te_files.conf | $(SORT) > $(tmpdir)/all_attrs_types.conf
> - $(verbose) cat $(tmpdir)/post_te_files.conf > $(tmpdir)/all_post.conf
> +$(tmpdir)/all_attrs_types.conf: $(tmpdir)/all_te_files.conf
> + $(verbose) $(get_type_attr_decl) $^ | $(SORT) > $@
> +
> +$(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
> + $(verbose) cat $(tmpdir)/post_te_files.conf > $@
> # these have to run individually because order matters:
> - $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(comment_move_decl) $(tmpdir)/all_te_files.conf > $(tmpdir)/only_te_rules.conf
> + $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $@ || true
> +
> +$(tmpdir)/only_te_rules.conf: $(tmpdir)/all_te_files.conf
> + $(verbose) $(comment_move_decl) $^ > $@
>
> ########################################
> #
> diff --git a/Rules.monolithic b/Rules.monolithic
> index 7e77c03..b635952 100644
> --- a/Rules.monolithic
> +++ b/Rules.monolithic
> @@ -144,17 +144,21 @@ $(tmpdir)/post_te_files.conf: $(m4support) $(tmpdir)/generated_definitions.conf
>
> # extract attributes and put them first. extract post te stuff
> # like genfscon and put last.
> -$(tmpdir)/all_attrs_types.conf $(tmpdir)/only_te_rules.conf $(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
> - $(verbose) $(get_type_attr_decl) $(tmpdir)/all_te_files.conf | $(SORT) > $(tmpdir)/all_attrs_types.conf
> - $(verbose) cat $(tmpdir)/post_te_files.conf > $(tmpdir)/all_post.conf
> +$(tmpdir)/all_attrs_types.conf: $(tmpdir)/all_te_files.conf
> + $(verbose) $(get_type_attr_decl) $^ | $(SORT) > $@
> +
> +$(tmpdir)/all_post.conf: $(tmpdir)/all_te_files.conf $(tmpdir)/post_te_files.conf
> + $(verbose) cat $(tmpdir)/post_te_files.conf > $@
> # these have to run individually because order matters:
> - $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $(tmpdir)/all_post.conf || true
> - $(verbose) $(comment_move_decl) $(tmpdir)/all_te_files.conf > $(tmpdir)/only_te_rules.conf
> + $(verbose) $(GREP) '^sid ' $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) '^fs_use_(xattr|task|trans)' $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^genfscon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^portcon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^netifcon $(tmpdir)/all_te_files.conf >> $@ || true
> + $(verbose) $(GREP) ^nodecon $(tmpdir)/all_te_files.conf >> $@ || true
> +
> +$(tmpdir)/only_te_rules.conf: $(tmpdir)/all_te_files.conf
> + $(verbose) $(comment_move_decl) $^ > $@
>
> ########################################
> #
>
--
Chris PeBenito
Tresys Technology, LLC
www.tresys.com | oss.tresys.com
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-03-14 12:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-18 23:26 [refpolicy] [PATCH] Fix parallel build of the policy Nicolas Iooss
2014-03-06 13:41 ` Christopher J. PeBenito
2014-03-06 20:05 ` Nicolas Iooss
2014-03-14 12:50 ` Christopher J. PeBenito
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.