* + initramfs-remove-compression-mode-choice.patch added to -mm tree
@ 2014-04-09 21:35 akpm
0 siblings, 0 replies; only message in thread
From: akpm @ 2014-04-09 21:35 UTC (permalink / raw)
To: mm-commits, ppandit, pebolle
Subject: + initramfs-remove-compression-mode-choice.patch added to -mm tree
To: pebolle@tiscali.nl,ppandit@redhat.com
From: akpm@linux-foundation.org
Date: Wed, 09 Apr 2014 14:35:41 -0700
The patch titled
Subject: initramfs: remove "compression mode" choice
has been added to the -mm tree. Its filename is
initramfs-remove-compression-mode-choice.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/initramfs-remove-compression-mode-choice.patch
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/initramfs-remove-compression-mode-choice.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Paul Bolle <pebolle@tiscali.nl>
Subject: initramfs: remove "compression mode" choice
9ba4bcb64589 ("initramfs: read CONFIG_RD_ variables for initramfs
compression") removed the users of the various INITRAMFS_COMPRESSION_*
Kconfig symbols. So since v3.13 the entire "Built-in initramfs
compression mode" choice is a set of knobs connected to nothing. The
entire choice can safely be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
usr/Kconfig | 77 --------------------------------------------------
1 file changed, 77 deletions(-)
diff -puN usr/Kconfig~initramfs-remove-compression-mode-choice usr/Kconfig
--- a/usr/Kconfig~initramfs-remove-compression-mode-choice
+++ a/usr/Kconfig
@@ -98,80 +98,3 @@ config RD_LZ4
help
Support loading of a LZ4 encoded initial ramdisk or cpio buffer
If unsure, say N.
-
-choice
- prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!=""
- help
- This option decides by which algorithm the builtin initramfs
- will be compressed. Several compression algorithms are
- available, which differ in efficiency, compression and
- decompression speed. Compression speed is only relevant
- when building a kernel. Decompression speed is relevant at
- each boot.
-
- If you have any problems with bzip2 or LZMA compressed
- initramfs, mail me (Alain Knaff) <alain@knaff.lu>.
-
- High compression options are mostly useful for users who are
- low on RAM, since it reduces the memory consumption during
- boot.
-
- If in doubt, select 'gzip'
-
-config INITRAMFS_COMPRESSION_NONE
- bool "None"
- help
- Do not compress the built-in initramfs at all. This may
- sound wasteful in space, but, you should be aware that the
- built-in initramfs will be compressed at a later stage
- anyways along with the rest of the kernel, on those
- architectures that support this.
- However, not compressing the initramfs may lead to slightly
- higher memory consumption during a short time at boot, while
- both the cpio image and the unpacked filesystem image will
- be present in memory simultaneously
-
-config INITRAMFS_COMPRESSION_GZIP
- bool "Gzip"
- depends on RD_GZIP
- help
- The old and tried gzip compression. It provides a good balance
- between compression ratio and decompression speed.
-
-config INITRAMFS_COMPRESSION_BZIP2
- bool "Bzip2"
- depends on RD_BZIP2
- help
- Its compression ratio and speed is intermediate.
- Decompression speed is slowest among the choices. The initramfs
- size is about 10% smaller with bzip2, in comparison to gzip.
- Bzip2 uses a large amount of memory. For modern kernels you
- will need at least 8MB RAM or more for booting.
-
-config INITRAMFS_COMPRESSION_LZMA
- bool "LZMA"
- depends on RD_LZMA
- help
- This algorithm's compression ratio is best.
- Decompression speed is between the other choices.
- Compression is slowest. The initramfs size is about 33%
- smaller with LZMA in comparison to gzip.
-
-config INITRAMFS_COMPRESSION_XZ
- bool "XZ"
- depends on RD_XZ
- help
- XZ uses the LZMA2 algorithm. The initramfs size is about 30%
- smaller with XZ in comparison to gzip. Decompression speed
- is better than that of bzip2 but worse than gzip and LZO.
- Compression is slow.
-
-config INITRAMFS_COMPRESSION_LZO
- bool "LZO"
- depends on RD_LZO
- help
- Its compression ratio is the poorest among the choices. The kernel
- size is about 10% bigger than gzip; however its speed
- (both compression and decompression) is the fastest.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-04-09 21:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-09 21:35 + initramfs-remove-compression-mode-choice.patch added to -mm tree akpm
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.