From: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> To: Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>, shiv prakash Agarwal <chhotu.shiv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Cc: "linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" <linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, Linux NICS <linux.nics-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>, "e1000-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org" <e1000-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>, Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, "linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" <linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> Subject: Re: Intel NIC testing on ARM Date: Tue, 29 Apr 2014 10:59:45 -0600 [thread overview] Message-ID: <535FDA81.3020508@wwwdotorg.org> (raw) In-Reply-To: <CAErSpo7gtOoh_swzOtSyzkjRXUuZvLWwWpBeqHgy-9J4oB6b7g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> On 04/29/2014 10:21 AM, Bjorn Helgaas wrote: > [+cc igb, tegra folks] > > On Tue, Apr 29, 2014 at 9:25 AM, shiv prakash Agarwal > <chhotu.shiv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: >> Also if I disable enabling bus master from igb driver, then ethernet >> functionality does not work due to below issue: > > This looks like an igb or (more likely) a tegra host bridge driver > issue, so hopefully somebody there can help you. > >> root@tegra-ubuntu:~# dhclient eth0 Are you running mainline Linux, or NVIDIA's "Linux4Tegra"? IIRC, that shell prompt is the L4T default, and I think kernel version 3.10 (mentioned in some of your logs) is the current L4T kernel version. If you're running L4T, you should contact the NVIDIA L4T team for support (linux-tegra-bugs-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org). If you can reproduce this issue on a recent mainline Linux (say 3.14, 3.15-rc* or or linux-next), we can continue this conversation here. In this case, I'd like to see: * Details re: which HW/board you're running on, how you're plugging in the PCIe device, etc. * U-Boot version/commit ID, so we can check any setup it's doing. * Link to source tree, so we can double-check the driver code you're running. It would be best to try a more recent source tree. Then perhaps we'll be able to try and repro this problem, although I don't have that NIC so that might be hard... >> [ 82.642468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >> [ 86.741124] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: >> RX >> [ 86.763938] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >> [ 96.748110] ------------[ cut here ]------------ >> [ 96.756653] WARNING: at >> /home/shiv/kernel_builds/linux/kernel/net/sched/sch_generic.c:255 >> dev_watchdog+0x264/0 >> x284() >> [ 96.775062] NETDEV WATCHDOG: eth0 (igb): transmit queue 0 timed out ... >> [ 259.740507] igb 0000:01:00.0 eth0: Reset adapter >> [ 263.738512] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: >> RX >> [ 278.749107] igb 0000:01:00.0 eth0: Reset adapter >> [ 282.739504] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: >> RX >> ------------------------CONTINUES for >> EVER--------------------------------------------------- Hmmm. This is a completely different problem than the first one or two in this thread, which were about an external abort while enabling the device's bus-master access... I assume there's no longer a problem with enabling bus-master?
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Warren <swarren@wwwdotorg.org> To: Bjorn Helgaas <bhelgaas@google.com>, shiv prakash Agarwal <chhotu.shiv@gmail.com> Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>, Linux NICS <linux.nics@intel.com>, "e1000-devel@lists.sourceforge.net" <e1000-devel@lists.sourceforge.net>, Thierry Reding <thierry.reding@gmail.com>, "linux-tegra@vger.kernel.org" <linux-tegra@vger.kernel.org> Subject: Re: Intel NIC testing on ARM Date: Tue, 29 Apr 2014 10:59:45 -0600 [thread overview] Message-ID: <535FDA81.3020508@wwwdotorg.org> (raw) In-Reply-To: <CAErSpo7gtOoh_swzOtSyzkjRXUuZvLWwWpBeqHgy-9J4oB6b7g@mail.gmail.com> On 04/29/2014 10:21 AM, Bjorn Helgaas wrote: > [+cc igb, tegra folks] > > On Tue, Apr 29, 2014 at 9:25 AM, shiv prakash Agarwal > <chhotu.shiv@gmail.com> wrote: >> Also if I disable enabling bus master from igb driver, then ethernet >> functionality does not work due to below issue: > > This looks like an igb or (more likely) a tegra host bridge driver > issue, so hopefully somebody there can help you. > >> root@tegra-ubuntu:~# dhclient eth0 Are you running mainline Linux, or NVIDIA's "Linux4Tegra"? IIRC, that shell prompt is the L4T default, and I think kernel version 3.10 (mentioned in some of your logs) is the current L4T kernel version. If you're running L4T, you should contact the NVIDIA L4T team for support (linux-tegra-bugs@nvidia.com). If you can reproduce this issue on a recent mainline Linux (say 3.14, 3.15-rc* or or linux-next), we can continue this conversation here. In this case, I'd like to see: * Details re: which HW/board you're running on, how you're plugging in the PCIe device, etc. * U-Boot version/commit ID, so we can check any setup it's doing. * Link to source tree, so we can double-check the driver code you're running. It would be best to try a more recent source tree. Then perhaps we'll be able to try and repro this problem, although I don't have that NIC so that might be hard... >> [ 82.642468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >> [ 86.741124] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: >> RX >> [ 86.763938] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >> [ 96.748110] ------------[ cut here ]------------ >> [ 96.756653] WARNING: at >> /home/shiv/kernel_builds/linux/kernel/net/sched/sch_generic.c:255 >> dev_watchdog+0x264/0 >> x284() >> [ 96.775062] NETDEV WATCHDOG: eth0 (igb): transmit queue 0 timed out ... >> [ 259.740507] igb 0000:01:00.0 eth0: Reset adapter >> [ 263.738512] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: >> RX >> [ 278.749107] igb 0000:01:00.0 eth0: Reset adapter >> [ 282.739504] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: >> RX >> ------------------------CONTINUES for >> EVER--------------------------------------------------- Hmmm. This is a completely different problem than the first one or two in this thread, which were about an external abort while enabling the device's bus-master access... I assume there's no longer a problem with enabling bus-master?
next prev parent reply other threads:[~2014-04-29 16:59 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-04-22 9:50 Intel NIC testing on ARM shiv prakash Agarwal 2014-04-22 16:01 ` Bjorn Helgaas 2014-04-24 7:47 ` shiv prakash Agarwal 2014-04-24 16:37 ` Bjorn Helgaas [not found] ` <CAHH3p5+xTwMaDW-k-0UUZ+21EhCCt2voWXP2jZf_PbRqOdukiA@mail.gmail.com> 2014-04-25 14:38 ` Bjorn Helgaas [not found] ` <CAHH3p5LKay-1gcgCn1fatM0hOL1Tc+a81Za+ePVjJ6oPo8+6rg@mail.gmail.com> 2014-04-28 18:00 ` Bjorn Helgaas [not found] ` <CAHH3p5+aRDq3j_au2Kou6Ef9L+iLaCUVV7hwZPhmD_HU6TxzqQ@mail.gmail.com> [not found] ` <CAHH3p5KYoPdRO-SEBGMwEPC5dhRd0j_nq_jDz+Z2WMuzOPKREA@mail.gmail.com> 2014-04-29 16:21 ` Bjorn Helgaas [not found] ` <CAErSpo7gtOoh_swzOtSyzkjRXUuZvLWwWpBeqHgy-9J4oB6b7g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2014-04-29 16:59 ` Stephen Warren [this message] 2014-04-29 16:59 ` Stephen Warren 2014-04-29 17:23 ` Bjorn Helgaas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=535FDA81.3020508@wwwdotorg.org \ --to=swarren-3lzwwm7+weoh9zmkesr00q@public.gmane.org \ --cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \ --cc=chhotu.shiv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=e1000-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \ --cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux.nics-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \ --cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.