* [meta-qt5] Qt5 SDK problem when building for Wandboard
@ 2014-05-01 8:29 Jacob Kroon
2014-05-02 1:01 ` Jonathan Liu
0 siblings, 1 reply; 9+ messages in thread
From: Jacob Kroon @ 2014-05-01 8:29 UTC (permalink / raw)
To: openembedded-devel
Hi,
For a while I've been working around a problem with using
populate_sdk_qt5.bbclass in my image recipe, I've had to use a
packagegroup-qt5-toolchain-target.bbappend to remove the following
dependant packages:
qt3d-dev
qt3d-mkspecs
qt3d-qmlplugins
qtlocation-dev
qtlocation-mkspecs
qtlocation-plugins
qtlocation-qmlplugins
I'm building for wandboard-* machines, and if I try to bitbake qt3d or
qtlocation, I get the following error:
Project ERROR: Unknown module(s) in QT: opengl
In my distro.conf I'm using:
DISTRO_FEATURES_append = " opengl ptest systemd"
DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
Could anyone hint at what a proper solution would be ?
I'm using master branches.
Build Configuration:
BB_VERSION = "1.23.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Fedora-20"
TARGET_SYS = "arm-oe-linux-gnueabi"
MACHINE = "wandboard-dual"
DISTRO = "monkey"
DISTRO_VERSION = "0.1"
TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa9"
TARGET_FPU = "vfp-neon"
meta-qt5 = "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
meta = "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
meta-fsl-arm = "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
meta-fsl-arm-extra = "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
-- Jacob
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-qt5] Qt5 SDK problem when building for Wandboard
2014-05-01 8:29 [meta-qt5] Qt5 SDK problem when building for Wandboard Jacob Kroon
@ 2014-05-02 1:01 ` Jonathan Liu
2014-05-02 6:28 ` Jacob Kroon
0 siblings, 1 reply; 9+ messages in thread
From: Jonathan Liu @ 2014-05-02 1:01 UTC (permalink / raw)
To: Jacob Kroon; +Cc: openembedded-devel
On 1/05/2014 6:29 PM, Jacob Kroon wrote:
> Hi,
>
> For a while I've been working around a problem with using
> populate_sdk_qt5.bbclass in my image recipe, I've had to use a
> packagegroup-qt5-toolchain-target.bbappend to remove the following
> dependant packages:
>
> qt3d-dev
> qt3d-mkspecs
> qt3d-qmlplugins
> qtlocation-dev
> qtlocation-mkspecs
> qtlocation-plugins
> qtlocation-qmlplugins
>
> I'm building for wandboard-* machines, and if I try to bitbake qt3d or
> qtlocation, I get the following error:
>
> Project ERROR: Unknown module(s) in QT: opengl
>
> In my distro.conf I'm using:
>
> DISTRO_FEATURES_append = " opengl ptest systemd"
> DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
>
> Could anyone hint at what a proper solution would be ?
>
> I'm using master branches.
>
> Build Configuration:
> BB_VERSION = "1.23.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Fedora-20"
> TARGET_SYS = "arm-oe-linux-gnueabi"
> MACHINE = "wandboard-dual"
> DISTRO = "monkey"
> DISTRO_VERSION = "0.1"
> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa9"
> TARGET_FPU = "vfp-neon"
> meta-qt5 = "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
> meta = "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
> meta-fsl-arm = "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
> meta-fsl-arm-extra = "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
>
> -- Jacob
Try adding the following to your distro.conf if you are using OpenGL ES 2.0:
PACKAGECONFIG_GL_pn-qtbase = "gles2"
Regards,
Jonathan
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-qt5] Qt5 SDK problem when building for Wandboard
2014-05-02 1:01 ` Jonathan Liu
@ 2014-05-02 6:28 ` Jacob Kroon
2014-05-02 6:34 ` Jonathan Liu
0 siblings, 1 reply; 9+ messages in thread
From: Jacob Kroon @ 2014-05-02 6:28 UTC (permalink / raw)
To: Jonathan Liu; +Cc: openembedded-devel
Hi Jonathan,
On Fri, May 2, 2014 at 3:01 AM, Jonathan Liu <net147@gmail.com> wrote:
> On 1/05/2014 6:29 PM, Jacob Kroon wrote:
>
>> Hi,
>>
>> For a while I've been working around a problem with using
>> populate_sdk_qt5.bbclass in my image recipe, I've had to use a
>> packagegroup-qt5-toolchain-target.bbappend to remove the following
>> dependant packages:
>>
>> qt3d-dev
>> qt3d-mkspecs
>> qt3d-qmlplugins
>> qtlocation-dev
>> qtlocation-mkspecs
>> qtlocation-plugins
>> qtlocation-qmlplugins
>>
>> I'm building for wandboard-* machines, and if I try to bitbake qt3d or
>> qtlocation, I get the following error:
>>
>> Project ERROR: Unknown module(s) in QT: opengl
>>
>> In my distro.conf I'm using:
>>
>> DISTRO_FEATURES_append = " opengl ptest systemd"
>> DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
>>
>> Could anyone hint at what a proper solution would be ?
>>
>> I'm using master branches.
>>
>> Build Configuration:
>> BB_VERSION = "1.23.0"
>> BUILD_SYS = "x86_64-linux"
>> NATIVELSBSTRING = "Fedora-20"
>> TARGET_SYS = "arm-oe-linux-gnueabi"
>> MACHINE = "wandboard-dual"
>> DISTRO = "monkey"
>> DISTRO_VERSION = "0.1"
>> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa9"
>> TARGET_FPU = "vfp-neon"
>> meta-qt5 = "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
>> meta = "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
>> meta-fsl-arm = "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
>> meta-fsl-arm-extra = "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
>>
>> -- Jacob
>>
> Try adding the following to your distro.conf if you are using OpenGL ES
> 2.0:
> PACKAGECONFIG_GL_pn-qtbase = "gles2"
>
>
I think this is already done by a qtbase_%.bbappend in the meta-fsl-arm
layer. I do have:
[OE jkroon@localhost build]$ bitbake -e qtbase | grep -e "^PACKAGECONFIG="
PACKAGECONFIG=" release udev evdev tools libs openssl
gles2 jpeg libpng zlib accessibility tslib
icu"
Could it be that Qt3D and QtLocation requires full OpenGL support, and that
gles2 is not enough ?
-- Jacob
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-qt5] Qt5 SDK problem when building for Wandboard
2014-05-02 6:28 ` Jacob Kroon
@ 2014-05-02 6:34 ` Jonathan Liu
2014-05-02 8:17 ` Jacob Kroon
0 siblings, 1 reply; 9+ messages in thread
From: Jonathan Liu @ 2014-05-02 6:34 UTC (permalink / raw)
To: Jacob Kroon; +Cc: openembedded-devel
On 2/05/2014 4:28 PM, Jacob Kroon wrote:
> Hi Jonathan,
>
> On Fri, May 2, 2014 at 3:01 AM, Jonathan Liu <net147@gmail.com
> <mailto:net147@gmail.com>> wrote:
>
> On 1/05/2014 6:29 PM, Jacob Kroon wrote:
>
> Hi,
>
> For a while I've been working around a problem with using
> populate_sdk_qt5.bbclass in my image recipe, I've had to use a
> packagegroup-qt5-toolchain-target.bbappend to remove the following
> dependant packages:
>
> qt3d-dev
> qt3d-mkspecs
> qt3d-qmlplugins
> qtlocation-dev
> qtlocation-mkspecs
> qtlocation-plugins
> qtlocation-qmlplugins
>
> I'm building for wandboard-* machines, and if I try to bitbake
> qt3d or
> qtlocation, I get the following error:
>
> Project ERROR: Unknown module(s) in QT: opengl
>
> In my distro.conf I'm using:
>
> DISTRO_FEATURES_append = " opengl ptest systemd"
> DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
>
> Could anyone hint at what a proper solution would be ?
>
> I'm using master branches.
>
> Build Configuration:
> BB_VERSION = "1.23.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Fedora-20"
> TARGET_SYS = "arm-oe-linux-gnueabi"
> MACHINE = "wandboard-dual"
> DISTRO = "monkey"
> DISTRO_VERSION = "0.1"
> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard
> cortexa9"
> TARGET_FPU = "vfp-neon"
> meta-qt5 =
> "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
> meta =
> "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
> meta-fsl-arm =
> "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
> meta-fsl-arm-extra =
> "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
>
> -- Jacob
>
> Try adding the following to your distro.conf if you are using
> OpenGL ES 2.0:
> PACKAGECONFIG_GL_pn-qtbase = "gles2"
>
>
> I think this is already done by a qtbase_%.bbappend in the
> meta-fsl-arm layer. I do have:
>
> [OE jkroon@localhost build]$ bitbake -e qtbase | grep -e "^PACKAGECONFIG="
> PACKAGECONFIG=" release udev evdev tools libs openssl
> gles2 jpeg libpng zlib accessibility
> tslib icu"
>
> Could it be that Qt3D and QtLocation requires full OpenGL support, and
> that gles2 is not enough ?
>
> -- Jacob
I have built all Qt modules fine with gles2. However, your PACKAGECONFIG
doesn't have "widgets".
I think the QtOpenGL module depends on widgets.
Regards,
Jonathan
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-qt5] Qt5 SDK problem when building for Wandboard
2014-05-02 6:34 ` Jonathan Liu
@ 2014-05-02 8:17 ` Jacob Kroon
2014-05-02 8:25 ` Jonathan Liu
0 siblings, 1 reply; 9+ messages in thread
From: Jacob Kroon @ 2014-05-02 8:17 UTC (permalink / raw)
To: Jonathan Liu; +Cc: openembedded-devel
On Fri, May 2, 2014 at 8:34 AM, Jonathan Liu <net147@gmail.com> wrote:
> On 2/05/2014 4:28 PM, Jacob Kroon wrote:
>
> Hi Jonathan,
>
> On Fri, May 2, 2014 at 3:01 AM, Jonathan Liu <net147@gmail.com> wrote:
>
>> On 1/05/2014 6:29 PM, Jacob Kroon wrote:
>>
>>> Hi,
>>>
>>> For a while I've been working around a problem with using
>>> populate_sdk_qt5.bbclass in my image recipe, I've had to use a
>>> packagegroup-qt5-toolchain-target.bbappend to remove the following
>>> dependant packages:
>>>
>>> qt3d-dev
>>> qt3d-mkspecs
>>> qt3d-qmlplugins
>>> qtlocation-dev
>>> qtlocation-mkspecs
>>> qtlocation-plugins
>>> qtlocation-qmlplugins
>>>
>>> I'm building for wandboard-* machines, and if I try to bitbake qt3d or
>>> qtlocation, I get the following error:
>>>
>>> Project ERROR: Unknown module(s) in QT: opengl
>>>
>>> In my distro.conf I'm using:
>>>
>>> DISTRO_FEATURES_append = " opengl ptest systemd"
>>> DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
>>>
>>> Could anyone hint at what a proper solution would be ?
>>>
>>> I'm using master branches.
>>>
>>> Build Configuration:
>>> BB_VERSION = "1.23.0"
>>> BUILD_SYS = "x86_64-linux"
>>> NATIVELSBSTRING = "Fedora-20"
>>> TARGET_SYS = "arm-oe-linux-gnueabi"
>>> MACHINE = "wandboard-dual"
>>> DISTRO = "monkey"
>>> DISTRO_VERSION = "0.1"
>>> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa9"
>>> TARGET_FPU = "vfp-neon"
>>> meta-qt5 = "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
>>> meta = "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
>>> meta-fsl-arm = "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
>>> meta-fsl-arm-extra = "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
>>>
>>> -- Jacob
>>>
>> Try adding the following to your distro.conf if you are using OpenGL ES
>> 2.0:
>> PACKAGECONFIG_GL_pn-qtbase = "gles2"
>>
>>
> I think this is already done by a qtbase_%.bbappend in the meta-fsl-arm
> layer. I do have:
>
> [OE jkroon@localhost build]$ bitbake -e qtbase | grep -e "^PACKAGECONFIG="
> PACKAGECONFIG=" release udev evdev tools libs openssl
> gles2 jpeg libpng zlib accessibility tslib
> icu"
>
> Could it be that Qt3D and QtLocation requires full OpenGL support, and
> that gles2 is not enough ?
>
> -- Jacob
>
> I have built all Qt modules fine with gles2. However, your PACKAGECONFIG
> doesn't have "widgets".
> I think the QtOpenGL module depends on widgets.
>
>
Indeed, adding "widgets" solves the issue, many thanks.
Can we describe this dependency in the recipes somehow ?
-- Jacob
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-qt5] Qt5 SDK problem when building for Wandboard
2014-05-02 8:17 ` Jacob Kroon
@ 2014-05-02 8:25 ` Jonathan Liu
2014-05-02 15:06 ` Jacob Kroon
0 siblings, 1 reply; 9+ messages in thread
From: Jonathan Liu @ 2014-05-02 8:25 UTC (permalink / raw)
To: Jacob Kroon; +Cc: openembedded-devel
On 2/05/2014 6:17 PM, Jacob Kroon wrote:
> On Fri, May 2, 2014 at 8:34 AM, Jonathan Liu <net147@gmail.com
> <mailto:net147@gmail.com>> wrote:
>
> On 2/05/2014 4:28 PM, Jacob Kroon wrote:
>> Hi Jonathan,
>>
>> On Fri, May 2, 2014 at 3:01 AM, Jonathan Liu <net147@gmail.com
>> <mailto:net147@gmail.com>> wrote:
>>
>> On 1/05/2014 6:29 PM, Jacob Kroon wrote:
>>
>> Hi,
>>
>> For a while I've been working around a problem with using
>> populate_sdk_qt5.bbclass in my image recipe, I've had to
>> use a
>> packagegroup-qt5-toolchain-target.bbappend to remove the
>> following
>> dependant packages:
>>
>> qt3d-dev
>> qt3d-mkspecs
>> qt3d-qmlplugins
>> qtlocation-dev
>> qtlocation-mkspecs
>> qtlocation-plugins
>> qtlocation-qmlplugins
>>
>> I'm building for wandboard-* machines, and if I try to
>> bitbake qt3d or
>> qtlocation, I get the following error:
>>
>> Project ERROR: Unknown module(s) in QT: opengl
>>
>> In my distro.conf I'm using:
>>
>> DISTRO_FEATURES_append = " opengl ptest systemd"
>> DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
>>
>> Could anyone hint at what a proper solution would be ?
>>
>> I'm using master branches.
>>
>> Build Configuration:
>> BB_VERSION = "1.23.0"
>> BUILD_SYS = "x86_64-linux"
>> NATIVELSBSTRING = "Fedora-20"
>> TARGET_SYS = "arm-oe-linux-gnueabi"
>> MACHINE = "wandboard-dual"
>> DISTRO = "monkey"
>> DISTRO_VERSION = "0.1"
>> TUNE_FEATURES = "arm armv7a vfp neon
>> callconvention-hard cortexa9"
>> TARGET_FPU = "vfp-neon"
>> meta-qt5 =
>> "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
>> meta =
>> "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
>> meta-fsl-arm =
>> "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
>> meta-fsl-arm-extra =
>> "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
>>
>> -- Jacob
>>
>> Try adding the following to your distro.conf if you are using
>> OpenGL ES 2.0:
>> PACKAGECONFIG_GL_pn-qtbase = "gles2"
>>
>>
>> I think this is already done by a qtbase_%.bbappend in the
>> meta-fsl-arm layer. I do have:
>>
>> [OE jkroon@localhost build]$ bitbake -e qtbase | grep -e
>> "^PACKAGECONFIG="
>> PACKAGECONFIG=" release udev evdev tools libs openssl
>> gles2 jpeg libpng zlib
>> accessibility tslib icu"
>>
>> Could it be that Qt3D and QtLocation requires full OpenGL
>> support, and that gles2 is not enough ?
>>
>> -- Jacob
> I have built all Qt modules fine with gles2. However, your
> PACKAGECONFIG doesn't have "widgets".
> I think the QtOpenGL module depends on widgets.
>
> Indeed, adding "widgets" solves the issue, many thanks.
> Can we describe this dependency in the recipes somehow ?
>
> -- Jacob
"widgets" is added to PACKAGECONFIG by default in meta-qt5. You could
submit a patch to add a comment for PACKAGECONFIG[widgets] in qtbase.inc.
Regards,
Jonathan
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-qt5] Qt5 SDK problem when building for Wandboard
2014-05-02 8:25 ` Jonathan Liu
@ 2014-05-02 15:06 ` Jacob Kroon
2014-05-02 15:48 ` Jacob Kroon
0 siblings, 1 reply; 9+ messages in thread
From: Jacob Kroon @ 2014-05-02 15:06 UTC (permalink / raw)
To: Jonathan Liu; +Cc: openembedded-devel
On Fri, May 2, 2014 at 10:25 AM, Jonathan Liu <net147@gmail.com> wrote:
> On 2/05/2014 6:17 PM, Jacob Kroon wrote:
>
> On Fri, May 2, 2014 at 8:34 AM, Jonathan Liu <net147@gmail.com> wrote:
>
>> On 2/05/2014 4:28 PM, Jacob Kroon wrote:
>>
>> Hi Jonathan,
>>
>> On Fri, May 2, 2014 at 3:01 AM, Jonathan Liu <net147@gmail.com> wrote:
>>
>>> On 1/05/2014 6:29 PM, Jacob Kroon wrote:
>>>
>>>> Hi,
>>>>
>>>> For a while I've been working around a problem with using
>>>> populate_sdk_qt5.bbclass in my image recipe, I've had to use a
>>>> packagegroup-qt5-toolchain-target.bbappend to remove the following
>>>> dependant packages:
>>>>
>>>> qt3d-dev
>>>> qt3d-mkspecs
>>>> qt3d-qmlplugins
>>>> qtlocation-dev
>>>> qtlocation-mkspecs
>>>> qtlocation-plugins
>>>> qtlocation-qmlplugins
>>>>
>>>> I'm building for wandboard-* machines, and if I try to bitbake qt3d or
>>>> qtlocation, I get the following error:
>>>>
>>>> Project ERROR: Unknown module(s) in QT: opengl
>>>>
>>>> In my distro.conf I'm using:
>>>>
>>>> DISTRO_FEATURES_append = " opengl ptest systemd"
>>>> DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
>>>>
>>>> Could anyone hint at what a proper solution would be ?
>>>>
>>>> I'm using master branches.
>>>>
>>>> Build Configuration:
>>>> BB_VERSION = "1.23.0"
>>>> BUILD_SYS = "x86_64-linux"
>>>> NATIVELSBSTRING = "Fedora-20"
>>>> TARGET_SYS = "arm-oe-linux-gnueabi"
>>>> MACHINE = "wandboard-dual"
>>>> DISTRO = "monkey"
>>>> DISTRO_VERSION = "0.1"
>>>> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa9"
>>>> TARGET_FPU = "vfp-neon"
>>>> meta-qt5 = "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
>>>> meta = "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
>>>> meta-fsl-arm = "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
>>>> meta-fsl-arm-extra = "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
>>>>
>>>> -- Jacob
>>>>
>>> Try adding the following to your distro.conf if you are using OpenGL
>>> ES 2.0:
>>> PACKAGECONFIG_GL_pn-qtbase = "gles2"
>>>
>>>
>> I think this is already done by a qtbase_%.bbappend in the meta-fsl-arm
>> layer. I do have:
>>
>> [OE jkroon@localhost build]$ bitbake -e qtbase | grep -e
>> "^PACKAGECONFIG="
>> PACKAGECONFIG=" release udev evdev tools libs openssl
>> gles2 jpeg libpng zlib accessibility tslib
>> icu"
>>
>> Could it be that Qt3D and QtLocation requires full OpenGL support, and
>> that gles2 is not enough ?
>>
>> -- Jacob
>>
>> I have built all Qt modules fine with gles2. However, your
>> PACKAGECONFIG doesn't have "widgets".
>> I think the QtOpenGL module depends on widgets.
>>
>>
> Indeed, adding "widgets" solves the issue, many thanks.
> Can we describe this dependency in the recipes somehow ?
>
> -- Jacob
>
> "widgets" is added to PACKAGECONFIG by default in meta-qt5. You could
> submit a patch to add a comment for PACKAGECONFIG[widgets] in qtbase.inc.
>
>
Something like this ?
+# needed for qt3d and qtlocation (otherwise do_configure fails to find
'opengl' module, which in turn requires 'widgets')
PACKAGECONFIG[widgets] = "-widgets,-no-widgets"
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-qt5] Qt5 SDK problem when building for Wandboard
2014-05-02 15:06 ` Jacob Kroon
@ 2014-05-02 15:48 ` Jacob Kroon
2014-05-04 1:47 ` Jonathan Liu
0 siblings, 1 reply; 9+ messages in thread
From: Jacob Kroon @ 2014-05-02 15:48 UTC (permalink / raw)
To: Jonathan Liu; +Cc: openembedded-devel
On Fri, May 2, 2014 at 5:06 PM, Jacob Kroon <jacob.kroon@gmail.com> wrote:
> On Fri, May 2, 2014 at 10:25 AM, Jonathan Liu <net147@gmail.com> wrote:
>
>> On 2/05/2014 6:17 PM, Jacob Kroon wrote:
>>
>> On Fri, May 2, 2014 at 8:34 AM, Jonathan Liu <net147@gmail.com> wrote:
>>
>>> On 2/05/2014 4:28 PM, Jacob Kroon wrote:
>>>
>>> Hi Jonathan,
>>>
>>> On Fri, May 2, 2014 at 3:01 AM, Jonathan Liu <net147@gmail.com> wrote:
>>>
>>>> On 1/05/2014 6:29 PM, Jacob Kroon wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> For a while I've been working around a problem with using
>>>>> populate_sdk_qt5.bbclass in my image recipe, I've had to use a
>>>>> packagegroup-qt5-toolchain-target.bbappend to remove the following
>>>>> dependant packages:
>>>>>
>>>>> qt3d-dev
>>>>> qt3d-mkspecs
>>>>> qt3d-qmlplugins
>>>>> qtlocation-dev
>>>>> qtlocation-mkspecs
>>>>> qtlocation-plugins
>>>>> qtlocation-qmlplugins
>>>>>
>>>>> I'm building for wandboard-* machines, and if I try to bitbake qt3d or
>>>>> qtlocation, I get the following error:
>>>>>
>>>>> Project ERROR: Unknown module(s) in QT: opengl
>>>>>
>>>>> In my distro.conf I'm using:
>>>>>
>>>>> DISTRO_FEATURES_append = " opengl ptest systemd"
>>>>> DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
>>>>>
>>>>> Could anyone hint at what a proper solution would be ?
>>>>>
>>>>> I'm using master branches.
>>>>>
>>>>> Build Configuration:
>>>>> BB_VERSION = "1.23.0"
>>>>> BUILD_SYS = "x86_64-linux"
>>>>> NATIVELSBSTRING = "Fedora-20"
>>>>> TARGET_SYS = "arm-oe-linux-gnueabi"
>>>>> MACHINE = "wandboard-dual"
>>>>> DISTRO = "monkey"
>>>>> DISTRO_VERSION = "0.1"
>>>>> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa9"
>>>>> TARGET_FPU = "vfp-neon"
>>>>> meta-qt5 = "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
>>>>> meta = "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
>>>>> meta-fsl-arm = "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
>>>>> meta-fsl-arm-extra = "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
>>>>>
>>>>> -- Jacob
>>>>>
>>>> Try adding the following to your distro.conf if you are using OpenGL
>>>> ES 2.0:
>>>> PACKAGECONFIG_GL_pn-qtbase = "gles2"
>>>>
>>>>
>>> I think this is already done by a qtbase_%.bbappend in the
>>> meta-fsl-arm layer. I do have:
>>>
>>> [OE jkroon@localhost build]$ bitbake -e qtbase | grep -e
>>> "^PACKAGECONFIG="
>>> PACKAGECONFIG=" release udev evdev tools libs openssl
>>> gles2 jpeg libpng zlib accessibility tslib
>>> icu"
>>>
>>> Could it be that Qt3D and QtLocation requires full OpenGL support, and
>>> that gles2 is not enough ?
>>>
>>> -- Jacob
>>>
>>> I have built all Qt modules fine with gles2. However, your
>>> PACKAGECONFIG doesn't have "widgets".
>>> I think the QtOpenGL module depends on widgets.
>>>
>>>
>> Indeed, adding "widgets" solves the issue, many thanks.
>> Can we describe this dependency in the recipes somehow ?
>>
>> -- Jacob
>>
>> "widgets" is added to PACKAGECONFIG by default in meta-qt5. You could
>> submit a patch to add a comment for PACKAGECONFIG[widgets] in qtbase.inc.
>>
>>
> Something like this ?
>
> +# needed for qt3d and qtlocation (otherwise do_configure fails to find
> 'opengl' module, which in turn requires 'widgets')
> PACKAGECONFIG[widgets] = "-widgets,-no-widgets"
>
>
Would it not be possible to write the recipe so that it depends on just the
mkspec/dev packages that are actually used in the target image ?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-qt5] Qt5 SDK problem when building for Wandboard
2014-05-02 15:48 ` Jacob Kroon
@ 2014-05-04 1:47 ` Jonathan Liu
0 siblings, 0 replies; 9+ messages in thread
From: Jonathan Liu @ 2014-05-04 1:47 UTC (permalink / raw)
To: Jacob Kroon; +Cc: openembedded-devel
On 3/05/2014 1:48 AM, Jacob Kroon wrote:
> On Fri, May 2, 2014 at 5:06 PM, Jacob Kroon <jacob.kroon@gmail.com
> <mailto:jacob.kroon@gmail.com>> wrote:
>
> On Fri, May 2, 2014 at 10:25 AM, Jonathan Liu <net147@gmail.com
> <mailto:net147@gmail.com>> wrote:
>
> On 2/05/2014 6:17 PM, Jacob Kroon wrote:
>> On Fri, May 2, 2014 at 8:34 AM, Jonathan Liu
>> <net147@gmail.com <mailto:net147@gmail.com>> wrote:
>>
>> On 2/05/2014 4:28 PM, Jacob Kroon wrote:
>>> Hi Jonathan,
>>>
>>> On Fri, May 2, 2014 at 3:01 AM, Jonathan Liu
>>> <net147@gmail.com <mailto:net147@gmail.com>> wrote:
>>>
>>> On 1/05/2014 6:29 PM, Jacob Kroon wrote:
>>>
>>> Hi,
>>>
>>> For a while I've been working around a problem
>>> with using
>>> populate_sdk_qt5.bbclass in my image recipe,
>>> I've had to use a
>>> packagegroup-qt5-toolchain-target.bbappend to
>>> remove the following
>>> dependant packages:
>>>
>>> qt3d-dev
>>> qt3d-mkspecs
>>> qt3d-qmlplugins
>>> qtlocation-dev
>>> qtlocation-mkspecs
>>> qtlocation-plugins
>>> qtlocation-qmlplugins
>>>
>>> I'm building for wandboard-* machines, and if I
>>> try to bitbake qt3d or
>>> qtlocation, I get the following error:
>>>
>>> Project ERROR: Unknown module(s) in QT: opengl
>>>
>>> In my distro.conf I'm using:
>>>
>>> DISTRO_FEATURES_append = " opengl ptest systemd"
>>> DISTRO_FEATURES_remove = "pulseaudio sysvinit x11"
>>>
>>> Could anyone hint at what a proper solution
>>> would be ?
>>>
>>> I'm using master branches.
>>>
>>> Build Configuration:
>>> BB_VERSION = "1.23.0"
>>> BUILD_SYS = "x86_64-linux"
>>> NATIVELSBSTRING = "Fedora-20"
>>> TARGET_SYS = "arm-oe-linux-gnueabi"
>>> MACHINE = "wandboard-dual"
>>> DISTRO = "monkey"
>>> DISTRO_VERSION = "0.1"
>>> TUNE_FEATURES = "arm armv7a vfp neon
>>> callconvention-hard cortexa9"
>>> TARGET_FPU = "vfp-neon"
>>> meta-qt5 =
>>> "master:485c277940d26e0c96953d8a649a9c84eed0afb8"
>>> meta =
>>> "master:4c2ffce2ae32447a1e39877b9bcbc2cc11ddd2fa"
>>> meta-fsl-arm =
>>> "master:27b0ffc33d75f0c37a876849a0db9c0277d5f036"
>>> meta-fsl-arm-extra =
>>> "master:a7515d4b20e43cfdd8654249fc16ac6b8c5ec3bc"
>>>
>>> -- Jacob
>>>
>>> Try adding the following to your distro.conf if you
>>> are using OpenGL ES 2.0:
>>> PACKAGECONFIG_GL_pn-qtbase = "gles2"
>>>
>>>
>>> I think this is already done by a qtbase_%.bbappend in
>>> the meta-fsl-arm layer. I do have:
>>>
>>> [OE jkroon@localhost build]$ bitbake -e qtbase | grep -e
>>> "^PACKAGECONFIG="
>>> PACKAGECONFIG=" release udev evdev tools libs openssl
>>> gles2 jpeg libpng zlib accessibility tslib icu"
>>>
>>> Could it be that Qt3D and QtLocation requires full
>>> OpenGL support, and that gles2 is not enough ?
>>>
>>> -- Jacob
>> I have built all Qt modules fine with gles2. However,
>> your PACKAGECONFIG doesn't have "widgets".
>> I think the QtOpenGL module depends on widgets.
>>
>> Indeed, adding "widgets" solves the issue, many thanks.
>> Can we describe this dependency in the recipes somehow ?
>>
>> -- Jacob
> "widgets" is added to PACKAGECONFIG by default in meta-qt5.
> You could submit a patch to add a comment for
> PACKAGECONFIG[widgets] in qtbase.inc.
>
>
> Something like this ?
>
> +# needed for qt3d and qtlocation (otherwise do_configure fails to
> find 'opengl' module, which in turn requires 'widgets')
> PACKAGECONFIG[widgets] = "-widgets,-no-widgets"
>
Looks okay, though I haven't verified this myself.
>
>
> Would it not be possible to write the recipe so that it depends on
> just the mkspec/dev packages that are actually used in the target image ?
>
I can't think of a good way to do that at the moment though there has
been some minimal discussion about improving the SDK generation:
http://article.gmane.org/gmane.comp.handhelds.openembedded.core/48084
https://bugzilla.yoctoproject.org/show_bug.cgi?id=5429
Regards,
Jonathan
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2014-05-04 1:47 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-05-01 8:29 [meta-qt5] Qt5 SDK problem when building for Wandboard Jacob Kroon
2014-05-02 1:01 ` Jonathan Liu
2014-05-02 6:28 ` Jacob Kroon
2014-05-02 6:34 ` Jonathan Liu
2014-05-02 8:17 ` Jacob Kroon
2014-05-02 8:25 ` Jonathan Liu
2014-05-02 15:06 ` Jacob Kroon
2014-05-02 15:48 ` Jacob Kroon
2014-05-04 1:47 ` Jonathan Liu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.