All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Roger Pau Monné" <roger.pau@citrix.com>
To: Mukesh Rathor <mukesh.rathor@oracle.com>, xen-devel@lists.xenproject.org
Cc: George.Dunlap@eu.citrix.com, keir.xen@gmail.com, tim@xen.org,
	JBeulich@suse.com
Subject: Re: [V10 PATCH 1/4] pvh dom0: construct_dom0 changes
Date: Tue, 6 May 2014 17:18:44 +0200	[thread overview]
Message-ID: <5368FD54.4040809@citrix.com> (raw)
In-Reply-To: <1398820008-9005-2-git-send-email-mukesh.rathor@oracle.com>

On 30/04/14 03:06, Mukesh Rathor wrote:
> This patch changes construct_dom0() to boot in pvh mode:
>   - Make sure dom0 elf supports pvh mode.
>   - Call guest_physmap_add_page for pvh rather than simple p2m setting
>   - Map all non-RAM regions 1:1 upto the end region in e820 or 4GB which
>     ever is higher.
>   - Allocate p2m, copying calculation from toolstack.
>   - Allocate shared info page from the virtual space so that dom0 PT
>     can be updated. Then update p2m for it with the actual mfn.
>   - Since we build the page tables for pvh same as for pv, in
>     pvh_fixup_page_tables_for_hap we replace the mfns with pfns.
> 
> Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
> Reviewed-by: Jan Beulich <jbeulich@suse.com>

I have the following patch on top of yours, in order to add the memory 
removed by the holes to the end of the memory map:

---
diff --git a/xen/arch/x86/domain_build.c b/xen/arch/x86/domain_build.c
index 38ed9f6..6f5ba22 100644
--- a/xen/arch/x86/domain_build.c
+++ b/xen/arch/x86/domain_build.c
@@ -327,11 +327,13 @@ static __init void pvh_add_mem_mapping(struct domain *d, unsigned long gfn,
  * pvh fixme: The following doesn't map MMIO ranges when they sit above the
  *            highest E820 covered address.
  */
-static __init void pvh_map_all_iomem(struct domain *d)
+static __init void pvh_map_all_iomem(struct domain *d, unsigned long nr_pages)
 {
     unsigned long start_pfn, end_pfn, end = 0, start = 0;
     const struct e820entry *entry;
-    unsigned int i, nump;
+    unsigned int i, j, nump, navail, nmap, nr_holes = 0;
+    struct page_info *page;
+    int rc;
 
     for ( i = 0, entry = e820.map; i < e820.nr_map; i++, entry++ )
     {
@@ -353,6 +355,9 @@ static __init void pvh_map_all_iomem(struct domain *d)
                 nump = end_pfn - start_pfn;
                 /* Add pages to the mapping */
                 pvh_add_mem_mapping(d, start_pfn, start_pfn, nump);
+                if (start_pfn <= nr_pages)
+                    nr_holes += (end_pfn < nr_pages) ?
+                                    nump : (nr_pages - start_pfn);
             }
             start = end;
         }
@@ -369,6 +374,42 @@ static __init void pvh_map_all_iomem(struct domain *d)
         nump = end_pfn - start_pfn;
         pvh_add_mem_mapping(d, start_pfn, start_pfn, nump);
     }
+
+    /*
+     * Add the memory removed by the holes at the end of the
+     * memory map.
+     */
+    for ( i = 0, entry = e820.map; i < e820.nr_map; i++, entry++ )
+    {
+        if ( entry->type != E820_RAM )
+            continue;
+
+        end_pfn = PFN_UP(entry->addr + entry->size);
+        if ( end_pfn <= nr_pages )
+            continue;
+
+        navail = end_pfn - nr_pages;
+        nmap = navail > nr_holes ? nr_holes : navail;
+        start_pfn = PFN_DOWN(entry->addr) < nr_pages ?
+                        nr_pages : PFN_DOWN(entry->addr);
+        page = alloc_domheap_pages(d, get_order_from_pages(nmap), 0);
+        if ( !page )
+            panic("Not enough RAM for domain 0");
+        for ( j = 0; j < nmap; j++ )
+        {
+            rc = guest_physmap_add_page(d, start_pfn + j, page_to_mfn(page), 0);
+            if (rc != 0)
+                panic("Unable to add gpfn %#lx mfn %#lx to Dom0 physmap",
+                      start_pfn + j, page_to_mfn(page));
+            page++;
+
+        }
+        nr_holes -= nmap;
+        if (nr_holes == 0)
+            break;
+    }
+
+    ASSERT(nr_holes == 0);
 }
 
 static __init void dom0_update_physmap(struct domain *d, unsigned long pfn,
@@ -1391,7 +1432,7 @@ int __init construct_dom0(
         pfn = shared_info_paddr >> PAGE_SHIFT;
         dom0_update_physmap(d, pfn, mfn, 0);
 
-        pvh_map_all_iomem(d);
+        pvh_map_all_iomem(d, nr_pages);
     }
 
     if ( d->domain_id == hardware_domid )

  reply	other threads:[~2014-05-06 15:19 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-30  1:06 [V10 PATCH 0/4] pvh dom0 patches Mukesh Rathor
2014-04-30  1:06 ` [V10 PATCH 1/4] pvh dom0: construct_dom0 changes Mukesh Rathor
2014-05-06 15:18   ` Roger Pau Monné [this message]
2014-04-30  1:06 ` [V10 PATCH 2/4] pvh dom0: Add checks and restrictions for p2m_is_foreign Mukesh Rathor
2014-05-01 16:14   ` Tim Deegan
2014-04-30  1:06 ` [V10 PATCH 3/4] pvh dom0: Add and remove foreign pages Mukesh Rathor
2014-05-01 16:19   ` Tim Deegan
2014-05-02  1:45     ` Mukesh Rathor
2014-05-02  8:38       ` Jan Beulich
2014-05-02  8:55       ` Tim Deegan
2014-05-02 23:35         ` Mukesh Rathor
2014-05-05  7:46           ` Jan Beulich
2014-05-08 12:16           ` Tim Deegan
2014-05-08 13:25             ` Jan Beulich
2014-05-08 22:58             ` Mukesh Rathor
2014-04-30  1:06 ` [V10 PATCH 4/4] dom0: add opt_dom0pvh to setup.c Mukesh Rathor
2014-04-30 14:11 ` [V10 PATCH 0/4] pvh dom0 patches Roger Pau Monné
2014-04-30 18:12   ` Mukesh Rathor
2014-05-01  1:19     ` Mukesh Rathor
2014-05-02 11:05       ` Roger Pau Monné
2014-05-02 12:31         ` Jan Beulich
2014-05-02 14:06           ` Roger Pau Monné
2014-05-02 14:16             ` Jan Beulich
2014-05-02 14:35               ` Roger Pau Monné
2014-05-02 15:41                 ` Jan Beulich
2014-05-02 16:13                   ` Roger Pau Monné
2014-05-02 19:35                     ` Konrad Rzeszutek Wilk
2014-05-03  0:01         ` Mukesh Rathor
2014-05-05  8:52           ` Roger Pau Monné
2014-05-06  0:28             ` Mukesh Rathor
2014-05-06  7:13               ` Roger Pau Monné
2014-05-06  8:09                 ` Jan Beulich
2014-05-07  1:00                 ` Mukesh Rathor
2014-05-07  7:50                   ` Jan Beulich
2014-05-07  9:48                     ` Roger Pau Monné
2014-05-07 11:34                       ` Jan Beulich
2014-05-08 10:27                         ` Roger Pau Monné
2014-05-08 10:44                           ` Jan Beulich
2014-05-08 15:00                             ` Roger Pau Monné
2014-05-08 15:20                               ` Jan Beulich
2014-05-07 13:25                     ` Konrad Rzeszutek Wilk
2014-05-08  0:04                     ` Mukesh Rathor
2014-05-08  6:37                       ` Jan Beulich
2014-05-08 19:15                         ` Mukesh Rathor
2014-05-07 13:20                   ` Konrad Rzeszutek Wilk
2014-05-07 13:38                     ` Roger Pau Monné
2014-05-08  0:12                       ` Mukesh Rathor
2014-05-08 10:52                         ` George Dunlap
2014-05-08 13:15                         ` David Vrabel
2014-05-08 22:29                           ` Mukesh Rathor
2014-05-08  0:07                     ` Mukesh Rathor
2014-05-06 19:38               ` Konrad Rzeszutek Wilk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5368FD54.4040809@citrix.com \
    --to=roger.pau@citrix.com \
    --cc=George.Dunlap@eu.citrix.com \
    --cc=JBeulich@suse.com \
    --cc=keir.xen@gmail.com \
    --cc=mukesh.rathor@oracle.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.