All of lore.kernel.org
 help / color / mirror / Atom feed
* Re: [PATCH] rtc: omap: Enable RTC_IRQWAKEEN bits when Alarm is set
       [not found] <1401439702-21626-1-git-send-email-lokeshvutla@ti.com>
@ 2014-05-30  8:50 ` Lokesh Vutla
  0 siblings, 0 replies; only message in thread
From: Lokesh Vutla @ 2014-05-30  8:50 UTC (permalink / raw)
  To: Lokesh Vutla
  Cc: a.zummo, akpm, rtc-linux, Rajendra Nayak, nsekhar, linux-omap

+ linux-omap
On Friday 30 May 2014 02:18 PM, Lokesh Vutla wrote:
> When RTC CLKTRCTRL bit is configured in HW_AUTO, module goes to sleep
> in IDLE state.
> The Alarm SWakeup event can be used to wakeup the RTC when it is in IDLE state.
> In order to do so, the alarm needs to be set and enabled before RTC enters the
> IDLE state. Also the wakeup generation for alarm/timer event needs
> to be set (bits [1:0] in RTC_IRQWAKEEN register).
> Currently RTC_IRQWAKEEN bits are set only in suspend/resume paths. With
> this ALARM interrupts are not generated when it enters IDLE state.
> So programming the RTC_IRQWAKEEN bits when ever ALARM is set.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Acked-by: Sekhar Nori <nsekhar@ti.com>
> ---
>  drivers/rtc/rtc-omap.c |   67 ++++++++++++++++++++++++------------------------
>  1 file changed, 33 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
> index 03bce13..21142e6 100644
> --- a/drivers/rtc/rtc-omap.c
> +++ b/drivers/rtc/rtc-omap.c
> @@ -171,17 +171,28 @@ static irqreturn_t rtc_irq(int irq, void *rtc)
>  
>  static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
>  {
> -	u8 reg;
> +	u8 reg, irqwake_reg = 0;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	const struct platform_device_id *id_entry =
> +					platform_get_device_id(pdev);
>  
>  	local_irq_disable();
>  	rtc_wait_not_busy();
>  	reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
> -	if (enabled)
> +	if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN)
> +		irqwake_reg = rtc_read(OMAP_RTC_IRQWAKEEN);
> +
> +	if (enabled) {
>  		reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
> -	else
> +		irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
> +	} else {
>  		reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
> +		irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
> +	}
>  	rtc_wait_not_busy();
>  	rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
> +	if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN)
> +		rtc_write(irqwake_reg, OMAP_RTC_IRQWAKEEN);
>  	local_irq_enable();
>  
>  	return 0;
> @@ -281,7 +292,10 @@ static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
>  
>  static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
>  {
> -	u8 reg;
> +	u8 reg, irqwake_reg = 0;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	const struct platform_device_id *id_entry =
> +					platform_get_device_id(pdev);
>  
>  	if (tm2bcd(&alm->time) < 0)
>  		return -EINVAL;
> @@ -297,11 +311,19 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
>  	rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG);
>  
>  	reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
> -	if (alm->enabled)
> +	if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN)
> +		irqwake_reg = rtc_read(OMAP_RTC_IRQWAKEEN);
> +
> +	if (alm->enabled) {
>  		reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
> -	else
> +		irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
> +	} else {
>  		reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
> +		irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
> +	}
>  	rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
> +	if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN)
> +		rtc_write(irqwake_reg, OMAP_RTC_IRQWAKEEN);
>  
>  	local_irq_enable();
>  
> @@ -503,28 +525,16 @@ static u8 irqstat;
>  
>  static int omap_rtc_suspend(struct device *dev)
>  {
> -	u8 irqwake_stat;
> -	struct platform_device *pdev = to_platform_device(dev);
> -	const struct platform_device_id *id_entry =
> -					platform_get_device_id(pdev);
> -
>  	irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);
>  
>  	/* FIXME the RTC alarm is not currently acting as a wakeup event
>  	 * source on some platforms, and in fact this enable() call is just
>  	 * saving a flag that's never used...
>  	 */
> -	if (device_may_wakeup(dev)) {
> +	if (device_may_wakeup(dev))
>  		enable_irq_wake(omap_rtc_alarm);
> -
> -		if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN) {
> -			irqwake_stat = rtc_read(OMAP_RTC_IRQWAKEEN);
> -			irqwake_stat |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
> -			rtc_write(irqwake_stat, OMAP_RTC_IRQWAKEEN);
> -		}
> -	} else {
> +	else
>  		rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
> -	}
>  
>  	/* Disable the clock/module */
>  	pm_runtime_put_sync(dev);
> @@ -534,25 +544,14 @@ static int omap_rtc_suspend(struct device *dev)
>  
>  static int omap_rtc_resume(struct device *dev)
>  {
> -	u8 irqwake_stat;
> -	struct platform_device *pdev = to_platform_device(dev);
> -	const struct platform_device_id *id_entry =
> -				platform_get_device_id(pdev);
> -
>  	/* Enable the clock/module so that we can access the registers */
>  	pm_runtime_get_sync(dev);
>  
> -	if (device_may_wakeup(dev)) {
> +	if (device_may_wakeup(dev))
>  		disable_irq_wake(omap_rtc_alarm);
> -
> -		if (id_entry->driver_data & OMAP_RTC_HAS_IRQWAKEEN) {
> -			irqwake_stat = rtc_read(OMAP_RTC_IRQWAKEEN);
> -			irqwake_stat &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
> -			rtc_write(irqwake_stat, OMAP_RTC_IRQWAKEEN);
> -		}
> -	} else {
> +	else
>  		rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG);
> -	}
> +
>  	return 0;
>  }
>  #endif
> 


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2014-05-30  8:51 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1401439702-21626-1-git-send-email-lokeshvutla@ti.com>
2014-05-30  8:50 ` [PATCH] rtc: omap: Enable RTC_IRQWAKEEN bits when Alarm is set Lokesh Vutla

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.