From: Kukjin Kim <kgene.kim@samsung.com>
To: Sachin Kamat <sachin.kamat@linaro.org>
Cc: linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kgene.kim@samsung.com,
tushar.behera@linaro.org, tomasz.figa@gmail.com
Subject: Re: [PATCH v2 Resend 2/2] ARM: dts: Add secure firmware support for Arndale-octa
Date: Sat, 31 May 2014 03:20:23 +0900 [thread overview]
Message-ID: <5388CBE7.40202@samsung.com> (raw)
In-Reply-To: <1401250382-24046-2-git-send-email-sachin.kamat@linaro.org>
On 05/28/14 13:13, Sachin Kamat wrote:
> From: Tushar Behera<tushar.behera@linaro.org>
>
> Arndale-Octa board is always configured to work with trustzone
> firmware binary. Added DTS node entry to enable this support.
>
> Signed-off-by: Tushar Behera<tushar.behera@linaro.org>
> Signed-off-by: Sachin Kamat<sachin.kamat@linaro.org>
> ---
> arch/arm/boot/dts/exynos5420-arndale-octa.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> index 6ee8149fd5c4..434fd9d3e09d 100644
> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> @@ -26,6 +26,11 @@
> bootargs = "console=ttySAC3,115200";
> };
>
> + firmware@02073000 {
> + compatible = "samsung,secure-firmware";
> + reg =<0x02073000 0x1000>;
> + };
> +
> fixed-rate-clocks {
> oscclk {
> compatible = "samsung,exynos5420-oscclk";
Applied, thanks.
- Kukjin
WARNING: multiple messages have this Message-ID (diff)
From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 Resend 2/2] ARM: dts: Add secure firmware support for Arndale-octa
Date: Sat, 31 May 2014 03:20:23 +0900 [thread overview]
Message-ID: <5388CBE7.40202@samsung.com> (raw)
In-Reply-To: <1401250382-24046-2-git-send-email-sachin.kamat@linaro.org>
On 05/28/14 13:13, Sachin Kamat wrote:
> From: Tushar Behera<tushar.behera@linaro.org>
>
> Arndale-Octa board is always configured to work with trustzone
> firmware binary. Added DTS node entry to enable this support.
>
> Signed-off-by: Tushar Behera<tushar.behera@linaro.org>
> Signed-off-by: Sachin Kamat<sachin.kamat@linaro.org>
> ---
> arch/arm/boot/dts/exynos5420-arndale-octa.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> index 6ee8149fd5c4..434fd9d3e09d 100644
> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> @@ -26,6 +26,11 @@
> bootargs = "console=ttySAC3,115200";
> };
>
> + firmware at 02073000 {
> + compatible = "samsung,secure-firmware";
> + reg =<0x02073000 0x1000>;
> + };
> +
> fixed-rate-clocks {
> oscclk {
> compatible = "samsung,exynos5420-oscclk";
Applied, thanks.
- Kukjin
next prev parent reply other threads:[~2014-05-30 18:20 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-28 4:13 [PATCH v2 Resend 1/2] ARM: EXYNOS: Update secondary boot addr for secure mode Sachin Kamat
2014-05-28 4:13 ` Sachin Kamat
2014-05-28 4:13 ` [PATCH v2 Resend 2/2] ARM: dts: Add secure firmware support for Arndale-octa Sachin Kamat
2014-05-28 4:13 ` Sachin Kamat
2014-05-30 18:20 ` Kukjin Kim [this message]
2014-05-30 18:20 ` Kukjin Kim
2014-05-30 18:19 ` [PATCH v2 Resend 1/2] ARM: EXYNOS: Update secondary boot addr for secure mode Andreas Färber
2014-05-30 18:19 ` Andreas Färber
2014-05-30 18:42 ` Kukjin Kim
2014-05-30 18:42 ` Kukjin Kim
2014-05-30 18:47 ` Tomasz Figa
2014-05-30 18:47 ` Tomasz Figa
2014-06-25 10:47 ` Tushar Behera
2014-06-25 10:47 ` Tushar Behera
2014-06-13 16:25 ` Sachin Kamat
2014-06-13 16:25 ` Sachin Kamat
2014-06-23 4:33 ` Sachin Kamat
2014-06-23 4:33 ` Sachin Kamat
2014-06-25 11:43 ` Kukjin Kim
2014-06-25 11:43 ` Kukjin Kim
2014-06-25 11:54 ` Andreas Färber
2014-06-25 11:54 ` Andreas Färber
2014-07-05 14:53 ` Sachin Kamat
2014-07-05 14:53 ` Sachin Kamat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5388CBE7.40202@samsung.com \
--to=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=sachin.kamat@linaro.org \
--cc=tomasz.figa@gmail.com \
--cc=tushar.behera@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.