All of lore.kernel.org
 help / color / mirror / Atom feed
* Two partitionless BTRFS drives no longer seen as containing BTRFS filesystem
@ 2018-10-06 23:23 evan d
  2018-10-07  0:32 ` Remi Gauvin
  2018-10-07  0:41 ` Qu Wenruo
  0 siblings, 2 replies; 16+ messages in thread
From: evan d @ 2018-10-06 23:23 UTC (permalink / raw)
  To: linux-btrfs

[-- Attachment #1: Type: text/plain, Size: 4585 bytes --]

I have two hard drives that were never partitioned, but set up as two
independent BRTFS filesystems.  Both drives were used in the same
machine running Arch Linux and the drives contain(ed) largely static
data.

I decommissioned the machine they were originally used in and on
installing in a newer Arch build found that BRTFS reported no
filesystem on either of the drives.

uname -a:
Linux z87i-pro 4.18.9-arch1-1-ARCH #1 SMP PREEMPT Wed Sep 19 21:19:17
UTC 2018 x86_64 GNU/Linux

btrfs --version: btrfs-progs v4.17.1
btrfs fi show: returns no data

parted -l:
Error: /dev/sdb: unrecognised disk label
Model: ATA WDC WD60EFRX-68M (scsi)
Disk /dev/sdb: 6001GB
Sector size (logical/physical): 512B/4096B
Partition Table: unknown
Disk Flags:

gdisk /dev/sdb - l:
Error: /dev/sdc: unrecognised disk label
Model: ATA WDC WD60EFRX-68M (scsi)
Disk /dev/sdc: 6001GB
Sector size (logical/physical): 512B/4096B
Partition Table: unknown
Disk Flags:

gdisk /dev/sdb -l
GPT fdisk (gdisk) version 1.0.4

Caution: invalid main GPT header, but valid backup; regenerating main header
from backup!

Caution! After loading partitions, the CRC doesn't check out!
Warning: Invalid CRC on main header data; loaded backup partition table.
Warning! Main and backup partition tables differ! Use the 'c' and 'e' options
on the recovery & transformation menu to examine the two tables.

Warning! One or more CRCs don't match. You should repair the disk!
Main header: ERROR
Backup header: OK
Main partition table: ERROR
Backup partition table: ERROR

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: damaged

****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
****************************************************************************
Warning! Main partition table overlaps the first partition by 33 blocks!
You will need to delete this partition or resize it in another utility.
Disk /dev/sdb: 11721045168 sectors, 5.5 TiB
Model: WDC WD60EFRX-68M
Sector size (logical/physical): 512/4096 bytes
Disk identifier (GUID): FB26D91F-0709-11E7-B298-3464A99AF244
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 11721045134
Partitions will be aligned on 8-sector boundaries
Total free space is 11721045101 sectors (5.5 TiB)

Number  Start (sector)    End (sector)  Size       Code  Name
  69               1               6   3.0 KiB     FFFF  犀읭퇸䵧羒⌦盤䧔Ẑ坔

gdisk /dev/sdc -l:
GPT fdisk (gdisk) version 1.0.4

Caution: invalid main GPT header, but valid backup; regenerating main header
from backup!

Caution! After loading partitions, the CRC doesn't check out!
Warning: Invalid CRC on main header data; loaded backup partition table.
Warning! Main and backup partition tables differ! Use the 'c' and 'e' options
on the recovery & transformation menu to examine the two tables.

Warning! One or more CRCs don't match. You should repair the disk!
Main header: ERROR
Backup header: OK
Main partition table: ERROR
Backup partition table: ERROR

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: damaged

****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
****************************************************************************
Warning! Main partition table overlaps the first partition by 33 blocks!
You will need to delete this partition or resize it in another utility.
Disk /dev/sdc: 11721045168 sectors, 5.5 TiB
Model: WDC WD60EFRX-68M
Sector size (logical/physical): 512/4096 bytes
Disk identifier (GUID): FC86A481-0709-11E7-B298-3464A99AF244
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 11721045134
Partitions will be aligned on 8-sector boundaries
Total free space is 11721045101 sectors (5.5 TiB)

Number  Start (sector)    End (sector)  Size       Code  Name
  69               1               6   3.0 KiB     FFFF  윜㺗ᣲ䌟犔熵䕭㶖Ẑ坔


Any ideas what's happened here seeing as both drives appear to suffer
the same symptoms and what I can do to attempt a recovery?

[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 67966 bytes --]

[    0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02
[    0.000000] Linux version 4.18.9-arch1-1-ARCH (builduser@heftig-19946) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Wed Sep 19 21:19:17 UTC 2018
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=7f3a7108-c5bc-40dd-856c-dea1ae6ef2a3 rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6e3bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c6e3c000-0x00000000c6e42fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c6e43000-0x00000000c7296fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7297000-0x00000000c76dcfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c76dd000-0x00000000d83dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d83e0000-0x00000000d8457fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8458000-0x00000000d846efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d846f000-0x00000000d8af0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d8af1000-0x00000000d9ffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ESRT=0xd9f56898  ACPI=0xd845c000  ACPI 2.0=0xd845c000  SMBIOS=0xd9f56518 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS All Series/Z87I-PRO, BIOS 1005 11/26/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 0400000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00DC000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 00DB000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 041FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 16302M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 9  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xda000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000d9f56898 to 0x00000000d9f568d0.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x214a1000, 0x214a1fff] PGTABLE
[    0.000000] BRK [0x214a2000, 0x214a2fff] PGTABLE
[    0.000000] BRK [0x214a3000, 0x214a3fff] PGTABLE
[    0.000000] BRK [0x214a4000, 0x214a4fff] PGTABLE
[    0.000000] BRK [0x214a5000, 0x214a5fff] PGTABLE
[    0.000000] BRK [0x214a6000, 0x214a6fff] PGTABLE
[    0.000000] BRK [0x214a7000, 0x214a7fff] PGTABLE
[    0.000000] BRK [0x214a8000, 0x214a8fff] PGTABLE
[    0.000000] BRK [0x214a9000, 0x214a9fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f4bf000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000D845C000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D845C080 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D8469DB0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000D845C188 00DC25 (v02 ALASKA A M I    00000031 INTL 20091112)
[    0.000000] ACPI: FACS 0x00000000D8AEF080 000040
[    0.000000] ACPI: APIC 0x00000000D8469EC0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D8469F38 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: LPIT 0x00000000D8469F80 00005C (v01 ALASKA A M I    00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D8469FE0 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D846A520 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20091112)
[    0.000000] ACPI: MCFG 0x00000000D846AFF8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000D846B038 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000D846B070 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000D846B3E0 0034E1 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41fdfa000-0x41fdfdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000008ffff]
[    0.000000]   node   0: [mem 0x0000000000091000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c6e3bfff]
[    0.000000]   node   0: [mem 0x00000000c6e43000-0x00000000c7296fff]
[    0.000000]   node   0: [mem 0x00000000c76dd000-0x00000000d83dffff]
[    0.000000]   node   0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041fdfffff]
[    0.000000] Reserved but unavailable: 32977 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[    0.000000] On node 0 totalpages: 4160815
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13759 pages used for memmap
[    0.000000]   DMA32 zone: 880532 pages, LIFO batch:31
[    0.000000]   Normal zone: 51192 pages used for memmap
[    0.000000]   Normal zone: 3276288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xdb200000-0xdf1fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc6e3c000-0xc6e42fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7297000-0xc76dcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd83e0000-0xd8457fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8458000-0xd846efff]
[    0.000000] PM: Registered nosave memory: [mem 0xd846f000-0xd8af0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd8af1000-0xd9ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4095779
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=7f3a7108-c5bc-40dd-856c-dea1ae6ef2a3 rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16210268K/16643260K available (10252K kernel code, 1335K rwdata, 3608K rodata, 1504K init, 636K bss, 432992K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 34439 entries in 135 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 3198.229 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e19c0fe650, max_idle_ns: 440795224241 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.97 BogoMIPS (lpj=10660763)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.019999] AppArmor: AppArmor disabled by boot time parameter
[    0.023597] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.024594] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024635] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.024666] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.024825] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024826] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024830] mce: CPU supports 9 MCE banks
[    0.024836] CPU0: Thermal monitoring enabled (TM1)
[    0.024847] process: using mwait in idle threads
[    0.024849] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.024849] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.024851] Spectre V2 : Mitigation: Full generic retpoline
[    0.024851] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.024852] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024852] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024853] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.024920] Freeing SMP alternatives memory: 28K
[    0.027239] TSC deadline timer enabled
[    0.027241] smpboot: CPU0: Intel(R) Core(TM) i5-4690S CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.046684] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.046712] ... version:                3
[    0.046713] ... bit width:              48
[    0.046713] ... generic registers:      8
[    0.046714] ... value mask:             0000ffffffffffff
[    0.046714] ... max period:             00007fffffffffff
[    0.046714] ... fixed-purpose events:   3
[    0.046715] ... event mask:             00000007000000ff
[    0.053347] Hierarchical SRCU implementation.
[    0.073441] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.080013] smp: Bringing up secondary CPUs ...
[    0.120021] x86: Booting SMP configuration:
[    0.120022] .... node  #0, CPUs:      #1 #2 #3
[    0.201456] smp: Brought up 1 node, 4 CPUs
[    0.201456] smpboot: Max logical packages: 1
[    0.201456] smpboot: Total of 4 processors activated (25596.90 BogoMIPS)
[    0.203618] devtmpfs: initialized
[    0.203618] x86/mm: Memory block size: 128MB
[    0.204199] PM: Registering ACPI NVS region [mem 0xc6e3c000-0xc6e42fff] (28672 bytes)
[    0.204199] PM: Registering ACPI NVS region [mem 0xd846f000-0xd8af0fff] (6823936 bytes)
[    0.204199] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.204199] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.204199] pinctrl core: initialized pinctrl subsystem
[    0.204199] RTC time: 22:04:21, date: 10/06/18
[    0.204199] NET: Registered protocol family 16
[    0.204199] audit: initializing netlink subsys (disabled)
[    0.204199] audit: type=2000 audit(1538863461.203:1): state=initialized audit_enabled=0 res=1
[    0.204199] cpuidle: using governor ladder
[    0.204199] cpuidle: using governor menu
[    0.204199] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.204199] ACPI: bus type PCI registered
[    0.204199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.204199] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.204199] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.204199] PCI: Using configuration type 1 for base access
[    0.204199] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.204199] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.204199] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.204199] ACPI: Added _OSI(Module Device)
[    0.204199] ACPI: Added _OSI(Processor Device)
[    0.204199] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.204199] ACPI: Added _OSI(Processor Aggregator Device)
[    0.204199] ACPI: Added _OSI(Linux-Dell-Video)
[    0.214815] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.217826] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.218563] ACPI: Dynamic OEM Table Load:
[    0.218563] ACPI: SSDT 0xFFFF93A98D25BC00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20091112)
[    0.218563] ACPI: Dynamic OEM Table Load:
[    0.218563] ACPI: SSDT 0xFFFF93A98D77E800 0005AA (v01 PmRef  ApIst    00003000 INTL 20091112)
[    0.220092] ACPI: Dynamic OEM Table Load:
[    0.220096] ACPI: SSDT 0xFFFF93A98D220200 000119 (v01 PmRef  ApCst    00003000 INTL 20091112)
[    0.220644] ACPI: Interpreter enabled
[    0.220665] ACPI: (supports S0 S3 S4 S5)
[    0.220666] ACPI: Using IOAPIC for interrupt routing
[    0.220690] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.220890] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.228963] ACPI: Power Resource [FN00] (off)
[    0.229029] ACPI: Power Resource [FN01] (off)
[    0.229098] ACPI: Power Resource [FN02] (off)
[    0.229161] ACPI: Power Resource [FN03] (off)
[    0.229224] ACPI: Power Resource [FN04] (off)
[    0.229999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.230004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.230249] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.230400] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.230401] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.230783] PCI host bridge to bus 0000:00
[    0.230785] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.230786] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.230787] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.230788] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.230789] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.230790] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.230791] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.230792] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.230793] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.230794] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.230795] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.230796] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.230797] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.230803] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.230878] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.230909] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.231016] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.231025] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.231030] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.231033] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.231042] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.231105] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.231112] pci 0000:00:03.0: reg 0x10: [mem 0xf7f14000-0xf7f17fff 64bit]
[    0.231199] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.231216] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[    0.231265] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.231327] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.231344] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1e000-0xf7f1e00f 64bit]
[    0.231397] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.231464] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.231482] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f1c000-0xf7f1c3ff]
[    0.231553] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.231619] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.231634] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[    0.231684] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.231745] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.231804] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.231913] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.231974] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.232080] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[    0.232140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.232249] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.232267] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f1b000-0xf7f1b3ff]
[    0.232339] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.232406] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[    0.232556] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.232569] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.232575] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.232581] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.232586] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.232592] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.232598] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f1a000-0xf7f1a7ff]
[    0.232626] pci 0000:00:1f.2: PME# supported from D3hot
[    0.232684] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.232699] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f19000-0xf7f190ff 64bit]
[    0.232715] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.232818] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.232834] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.232847] pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e00fff 64bit]
[    0.232857] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.232913] pci 0000:01:00.0: supports D1 D2
[    0.232914] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.232979] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.232981] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.232982] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.232985] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.233038] acpiphp: Slot [1] registered
[    0.233041] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.233106] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[    0.233134] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit]
[    0.233168] pci 0000:03:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref]
[    0.233235] pci 0000:03:00.0: supports D1 D2
[    0.233236] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.233316] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.233320] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.233384] pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.233416] pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c07fff 64bit]
[    0.233541] pci 0000:04:00.0: PME# supported from D3cold
[    0.233614] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.233617] pci 0000:00:1c.4:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.234233] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.234284] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.234334] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.234384] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.234434] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.234483] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.234532] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.234582] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.234936] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.234936] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.234936] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.234936] vgaarb: loaded
[    0.234936] pps_core: LinuxPPS API ver. 1 registered
[    0.234936] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.234936] PTP clock support registered
[    0.234936] EDAC MC: Ver: 3.0.0
[    0.234936] Registered efivars operations
[    0.238021] PCI: Using ACPI for IRQ routing
[    0.238021] PCI: pci_cache_line_size set to 64 bytes
[    0.238021] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.238021] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.238021] e820: reserve RAM buffer [mem 0xc6e3c000-0xc7ffffff]
[    0.238021] e820: reserve RAM buffer [mem 0xc7297000-0xc7ffffff]
[    0.238021] e820: reserve RAM buffer [mem 0xd83e0000-0xdbffffff]
[    0.238021] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[    0.238021] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[    0.238021] NetLabel: Initializing
[    0.238021] NetLabel:  domain hash size = 128
[    0.238021] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.238021] NetLabel:  unlabeled traffic allowed by default
[    0.238021] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.238021] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.241014] clocksource: Switched to clocksource tsc-early
[    0.247542] VFS: Disk quotas dquot_6.6.0
[    0.247553] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.247606] pnp: PnP ACPI init
[    0.247715] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.247719] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.247892] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.247894] system 00:01: [io  0xffff] has been reserved
[    0.247895] system 00:01: [io  0xffff] has been reserved
[    0.247896] system 00:01: [io  0xffff] has been reserved
[    0.247897] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.247898] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.247899] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.247900] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.247902] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.247903] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.247905] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.247923] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.247962] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.247965] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.248041] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.248043] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248083] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.248086] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248493] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.248494] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.248495] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.248497] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.248498] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.248499] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.248500] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.248501] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.248503] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.248504] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.248505] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.248506] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.248509] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248733] pnp: PnP ACPI: found 7 devices
[    0.254086] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.254110] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.254112] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.254114] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.254116] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.254119] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.254127] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.254130] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.254136] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.254139] pci 0000:00:1c.4:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.254145] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.254146] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.254147] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.254148] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.254149] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.254150] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.254151] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.254152] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.254153] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.254154] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.254155] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.254156] pci_bus 0000:00: resource 15 [mem 0xdf200000-0xfeafffff window]
[    0.254158] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.254159] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.254160] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.254161] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.254162] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.254255] NET: Registered protocol family 2
[    0.254347] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.254388] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.254514] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.254611] TCP: Hash tables configured (established 131072 bind 65536)
[    0.254636] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.254668] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.254716] NET: Registered protocol family 1
[    0.254719] NET: Registered protocol family 44
[    0.254726] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.273415] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c6 took 18091 usecs
[    0.293411] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c6 took 19516 usecs
[    0.293545] PCI: CLS 64 bytes, default 64
[    0.293569] Unpacking initramfs...
[    0.403600] Freeing initrd memory: 11520K
[    0.403606] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.403608] software IO TLB [mem 0xcfb5e000-0xd3b5e000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.403709] Scanning for low memory corruption every 60 seconds
[    0.404085] Initialise system trusted keyrings
[    0.404093] Key type blacklist registered
[    0.404125] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.404935] zbud: loaded
[    0.405132] pstore: using lz4hc compression
[    0.405833] Key type asymmetric registered
[    0.405834] Asymmetric key parser 'x509' registered
[    0.405853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.405872] io scheduler noop registered
[    0.405873] io scheduler deadline registered
[    0.405898] io scheduler cfq registered (default)
[    0.405899] io scheduler mq-deadline registered
[    0.405900] io scheduler kyber registered
[    0.405914] io scheduler bfq registered
[    0.406318] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.406360] efifb: probing for efifb
[    0.406368] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.406368] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.406369] efifb: scrolling: redraw
[    0.406370] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.407745] Console: switching to colour frame buffer device 128x48
[    0.409057] fb0: EFI VGA frame buffer device
[    0.409063] intel_idle: MWAIT substates: 0x42120
[    0.409064] intel_idle: v0.4.1 model 0x3C
[    0.409168] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.409212] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.409218] ACPI: Power Button [PWRB]
[    0.409244] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.409251] ACPI: Power Button [PWRF]
[    0.409907] thermal LNXTHERM:00: registered as thermal_zone0
[    0.409908] ACPI: Thermal Zone [TZ00] (28 C)
[    0.410125] thermal LNXTHERM:01: registered as thermal_zone1
[    0.410126] ACPI: Thermal Zone [TZ01] (30 C)
[    0.410230] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.411021] rtc_cmos 00:02: RTC can wake from S4
[    0.411138] rtc_cmos 00:02: registered as rtc0
[    0.411149] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.411181] intel_pstate: Intel P-state driver initializing
[    0.411443] ledtrig-cpu: registered to indicate activity on CPUs
[    0.412118] NET: Registered protocol family 10
[    0.421520] Segment Routing with IPv6
[    0.421572] NET: Registered protocol family 17
[    0.422290] RAS: Correctable Errors collector initialized.
[    0.422371] microcode: sig=0x306c3, pf=0x2, revision=0x25
[    0.422603] microcode: Microcode Update Driver: v2.2.
[    0.422631] sched_clock: Marking stable (422580800, 0)->(405893053, 16687747)
[    0.423264] registered taskstats version 1
[    0.423280] Loading compiled-in X.509 certificates
[    0.425817] Loaded X.509 cert 'Build time autogenerated kernel key: 383ffa8379c82d154075bba04ee7c064ed536b2d'
[    0.425838] zswap: loaded using pool lzo/zbud
[    0.429158] Key type big_key registered
[    0.429766]   Magic number: 6:323:97
[    0.429861] rtc_cmos 00:02: setting system clock to 2018-10-06 22:04:21 UTC (1538863461)
[    0.431286] Freeing unused kernel image memory: 1504K
[    0.440066] Write protecting the kernel read-only data: 16384k
[    0.440741] Freeing unused kernel image memory: 2008K
[    0.440932] Freeing unused kernel image memory: 488K
[    0.441221] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.441222] x86/mm: Checking user space page tables
[    0.441249] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.466552] Linux agpgart interface v0.103
[    0.519390] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    0.519391] fb: switching to inteldrmfb from EFI VGA
[    0.519405] Console: switching to colour dummy device 80x25
[    0.519465] [drm] Replacing VGA console driver
[    0.526724] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.526725] [drm] Driver supports precise vblank timestamp query.
[    0.530060] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.533237] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    0.534569] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.534787] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    0.706065] fbcon: inteldrmfb (fb0) is primary device
[    0.743662] Console: switching to colour frame buffer device 240x67
[    0.771434] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    0.839024] SCSI subsystem initialized
[    0.840781] ACPI: bus type USB registered
[    0.840794] usbcore: registered new interface driver usbfs
[    0.840798] usbcore: registered new interface driver hub
[    0.840817] usbcore: registered new device driver usb
[    0.844442] libata version 3.00 loaded.
[    0.845021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.847640] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.847644] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.848693] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.848696] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.849218] ehci-pci: EHCI PCI platform driver
[    0.850242] ahci 0000:00:1f.2: version 3.0
[    0.850353] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    0.850355] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.850402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.850403] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.850404] usb usb1: Product: xHCI Host Controller
[    0.850405] usb usb1: Manufacturer: Linux 4.18.9-arch1-1-ARCH xhci-hcd
[    0.850406] usb usb1: SerialNumber: 0000:00:14.0
[    0.850483] hub 1-0:1.0: USB hub found
[    0.850497] hub 1-0:1.0: 14 ports detected
[    0.852609] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.852613] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    0.852621] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.852623] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.852624] ehci-pci 0000:00:1a.0: debug port 2
[    0.852625] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.852656] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.852657] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.852658] usb usb3: Product: xHCI Host Controller
[    0.852659] usb usb3: Manufacturer: Linux 4.18.9-arch1-1-ARCH xhci-hcd
[    0.852659] usb usb3: SerialNumber: 0000:00:14.0
[    0.852721] hub 3-0:1.0: USB hub found
[    0.852733] hub 3-0:1.0: 6 ports detected
[    0.856517] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.856526] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f1c000
[    0.866719] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.866755] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.866756] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.866757] usb usb2: Product: EHCI Host Controller
[    0.866758] usb usb2: Manufacturer: Linux 4.18.9-arch1-1-ARCH ehci_hcd
[    0.866759] usb usb2: SerialNumber: 0000:00:1a.0
[    0.866913] hub 2-0:1.0: USB hub found
[    0.866917] hub 2-0:1.0: 2 ports detected
[    0.867041] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.867046] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.874013] scsi host0: ahci
[    0.874168] scsi host1: ahci
[    0.874324] scsi host2: ahci
[    0.877085] scsi host3: ahci
[    0.877159] scsi host4: ahci
[    0.883375] scsi host5: ahci
[    0.883412] ata1: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a100 irq 26
[    0.883414] ata2: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a180 irq 26
[    0.883416] ata3: SATA max UDMA/133 abar m2048@0xf7f1a000 port 0xf7f1a200 irq 26
[    0.883416] ata4: DUMMY
[    0.883417] ata5: DUMMY
[    0.883417] ata6: DUMMY
[    0.927442] xhci_hcd 0000:04:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[    0.927590] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.927592] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.927592] usb usb4: Product: xHCI Host Controller
[    0.927593] usb usb4: Manufacturer: Linux 4.18.9-arch1-1-ARCH xhci-hcd
[    0.927594] usb usb4: SerialNumber: 0000:04:00.0
[    0.927753] hub 4-0:1.0: USB hub found
[    0.927760] hub 4-0:1.0: 2 ports detected
[    0.927843] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.927847] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.927849] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.927851] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[    0.927853] xhci_hcd 0000:04:00.0: Host supports USB 3.0  SuperSpeed
[    0.927859] ehci-pci 0000:00:1d.0: debug port 2
[    0.927888] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.927910] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.927911] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.927912] usb usb6: Product: xHCI Host Controller
[    0.927913] usb usb6: Manufacturer: Linux 4.18.9-arch1-1-ARCH xhci-hcd
[    0.927914] usb usb6: SerialNumber: 0000:04:00.0
[    0.928045] hub 6-0:1.0: USB hub found
[    0.928053] hub 6-0:1.0: 2 ports detected
[    0.931741] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.931748] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f1b000
[    0.943380] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.943424] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.943426] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.943427] usb usb5: Product: EHCI Host Controller
[    0.943429] usb usb5: Manufacturer: Linux 4.18.9-arch1-1-ARCH ehci_hcd
[    0.943430] usb usb5: SerialNumber: 0000:00:1d.0
[    0.943638] hub 5-0:1.0: USB hub found
[    0.943644] hub 5-0:1.0: 2 ports detected
[    1.183406] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.196738] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.200546] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.200574] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.200602] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.201745] ata3.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[    1.201751] ata3.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.201900] ata2.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[    1.201906] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.202987] ata3.00: configured for UDMA/133
[    1.203092] ata2.00: configured for UDMA/133
[    1.212605] ata1.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
[    1.212610] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.222477] ata1.00: configured for UDMA/133
[    1.222872] scsi 0:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.15 PQ: 0 ANSI: 5
[    1.223839] scsi 1:0:0:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 5
[    1.224676] scsi 2:0:0:0: Direct-Access     ATA      WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 5
[    1.234152] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.234171] sd 0:0:0:0: [sda] Write Protect is off
[    1.234173] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.234187] sd 2:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[    1.234188] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    1.234189] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[    1.234189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.234190] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.234193] sd 2:0:0:0: [sdc] Write Protect is off
[    1.234194] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.234196] sd 1:0:0:0: [sdb] Write Protect is off
[    1.234197] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.234203] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.234206] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.235081]  sda: sda1 sda2 sda3
[    1.235316] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.239851] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.240171] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.273365] usb 5-1: new high-speed USB device number 2 using ehci-pci
[    1.316432] random: fast init done
[    1.328081] usb 1-5: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33
[    1.328084] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.328086] usb 1-5: Product: Microsoft® 2.4GHz Transceiver v7.0
[    1.328087] usb 1-5: Manufacturer: Microsoft
[    1.332409] hidraw: raw HID events driver (C) Jiri Kosina
[    1.343733] usb 2-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[    1.343735] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.343971] hub 2-1:1.0: USB hub found
[    1.344052] hub 2-1:1.0: 6 ports detected
[    1.345565] usbcore: registered new interface driver usbhid
[    1.345566] usbhid: USB HID core driver
[    1.347275] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:045E:0745.0001/input/input3
[    1.403513] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-5/input0
[    1.403857] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:045E:0745.0002/input/input4
[    1.403909] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:045E:0745.0002/input/input5
[    1.413381] tsc: Refined TSC clocksource calibration: 3198.146 MHz
[    1.413386] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1972a5b8e, max_idle_ns: 440795217436 ns
[    1.413415] clocksource: Switched to clocksource tsc
[    1.420465] usb 5-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[    1.420468] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.420723] hub 5-1:1.0: USB hub found
[    1.420825] hub 5-1:1.0: 8 ports detected
[    1.450036] usb 1-11: new full-speed USB device number 3 using xhci_hcd
[    1.460211] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-5/input1
[    1.460777] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:045E:0745.0003/input/input6
[    1.516826] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:045E:0745.0003/input/input8
[    1.517125] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-5/input2
[    1.591383] usb 1-11: string descriptor 0 read error: -22
[    1.591389] usb 1-11: New USB device found, idVendor=0b05, idProduct=17d0, bcdDevice= 0.02
[    1.591390] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.614805] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.736737] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.753584] systemd[1]: Detected architecture x86-64.
[    1.756972] systemd[1]: Set hostname to <z87i-pro>.
[    1.858914] random: systemd: uninitialized urandom read (16 bytes read)
[    1.858998] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.859173] random: systemd: uninitialized urandom read (16 bytes read)
[    1.862986] systemd[1]: Listening on RPCbind Server Activation Socket.
[    1.863127] random: systemd: uninitialized urandom read (16 bytes read)
[    1.863138] systemd[1]: Reached target Remote File Systems.
[    1.863558] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.863848] systemd[1]: Created slice User and Session Slice.
[    1.863960] systemd[1]: Reached target Slices.
[    1.864069] systemd[1]: Reached target Login Prompts.
[    1.882988] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    1.887766] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.887801] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.887839] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.888048] audit: type=1130 audit(1538863462.953:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.889532] audit: type=1130 audit(1538863462.953:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.901332] audit: type=1130 audit(1538863462.966:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.904614] vboxdrv: loading out-of-tree module taints kernel.
[    1.904725] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    1.905804] audit: type=1130 audit(1538863462.970:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.908765] vboxdrv: Found 4 processor cores
[    1.912408] audit: type=1130 audit(1538863462.976:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.920124] audit: type=1130 audit(1538863462.986:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.922740] audit: type=1130 audit(1538863462.986:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.929713] RPC: Registered named UNIX socket transport module.
[    1.929714] RPC: Registered udp transport module.
[    1.929714] RPC: Registered tcp transport module.
[    1.929715] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.930141] vboxdrv: TSC mode is Invariant, tentative frequency 3198132636 Hz
[    1.930142] vboxdrv: Successfully loaded version 5.2.18 (interface 0x00290001)
[    1.931485] audit: type=1130 audit(1538863462.996:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.932530] VBoxPciLinuxInit
[    1.932534] vboxpci: IOMMU not found (not registered)
[    1.933406] VBoxNetAdp: Successfully started.
[    1.935395] VBoxNetFlt: Successfully started.
[    1.936189] audit: type=1130 audit(1538863463.000:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.966570] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.037246] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.037252] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.037256] r8169 0000:01:00.0: enabling device (0000 -> 0003)
[    2.037570] r8169 0000:01:00.0 eth0: RTL8168e/8111e, 18:d6:c7:04:fe:b9, XID 2c200000, IRQ 33
[    2.037571] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.039118] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.073132] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.080311] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    2.088530] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.091104] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.091106] cfg80211: failed to load regulatory.db
[    2.093176] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    2.093177] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.093178] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.093178] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.093179] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.110576] cryptd: max_cpu_qlen set to 1000
[    2.111526] Adding 8253436k swap on /dev/sda3.  Priority:-2 extents:1 across:8253436k SSFS
[    2.122136] AVX2 version of gcm_enc/dec engaged.
[    2.122137] AES CTR mode by8 optimization enabled
[    2.135959] mousedev: PS/2 mouse device common for all mice
[    2.165008] systemd-journald[275]: Received request to flush runtime journal from PID 1
[    2.205359] Bluetooth: Core ver 2.22
[    2.205371] NET: Registered protocol family 31
[    2.205371] Bluetooth: HCI device and connection manager initialized
[    2.205374] Bluetooth: HCI socket layer initialized
[    2.205375] Bluetooth: L2CAP socket layer initialized
[    2.205379] Bluetooth: SCO socket layer initialized
[    2.213684] usbcore: registered new interface driver btusb
[    2.215297] usbcore: registered new interface driver ath3k
[    2.260381] kvm: disabled by bios
[    2.266677] nct6775: Enabling hardware monitor logical device mappings.
[    2.266686] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
[    2.306513] ath9k 0000:03:00.0: enabling device (0000 -> 0002)
[    2.315065] intel_rapl: Found RAPL domain package
[    2.315067] intel_rapl: Found RAPL domain core
[    2.315068] intel_rapl: Found RAPL domain uncore
[    2.315068] intel_rapl: Found RAPL domain dram
[    2.316007] ath: EEPROM regdomain: 0x60
[    2.316007] ath: EEPROM indicates we should expect a direct regpair map
[    2.316009] ath: Country alpha2 being used: 00
[    2.316009] ath: Regpair used: 0x60
[    2.333802] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.334066] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffadae42300000, irq=19
[    2.337723] asus_wmi: ASUS WMI generic driver loaded
[    2.338028] iTCO_vendor_support: vendor-support=0
[    2.339081] asus_wmi: Initialization: 0x0
[    2.339107] asus_wmi: BIOS WMI version: 0.9
[    2.339149] asus_wmi: SFUN value: 0x0
[    2.339542] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[    2.339653] asus_wmi: Number of fans: 1
[    2.339963] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.339993] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    2.340193] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.342807] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    2.348932] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    2.356883] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[    2.361547] Creating 1 MTD partitions on "intel-spi":
[    2.361550] 0x000000000000-0x000000800000 : "BIOS"
[    2.380753] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[    2.567643] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    2.735936] r8169 0000:01:00.0 enp1s0: link down
[    2.735992] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    2.744639] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    2.754107] random: crng init done
[    2.754108] random: 7 urandom warning(s) missed due to ratelimiting
[    2.755964] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    2.769423] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    2.815577] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    4.863703] fuse init (API version 7.27)
[    6.650424] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.384634] kauditd_printk_skb: 32 callbacks suppressed
[    7.384637] audit: type=1131 audit(1538863468.450:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.487777] wlp3s0: authenticate with 00:14:d1:cf:5b:98
[   10.500350] wlp3s0: send auth to 00:14:d1:cf:5b:98 (try 1/3)
[   10.502256] wlp3s0: authenticated
[   10.503323] wlp3s0: associate with 00:14:d1:cf:5b:98 (try 1/3)
[   10.507325] wlp3s0: RX AssocResp from 00:14:d1:cf:5b:98 (capab=0x411 status=0 aid=3)
[   10.507448] wlp3s0: associated
[   11.491780] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   11.547315] audit: type=1130 audit(1538863472.610:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.565971] audit: type=1130 audit(1538863472.630:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpcbind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.574319] audit: type=1130 audit(1538863472.640:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpc-statd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.577626] audit: type=1130 audit(1538863472.643:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-mountd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.588866] NFSD: starting 90-second grace period (net f0000098)
[   11.590230] audit: type=1130 audit(1538863472.656:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-server comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.593838] audit: type=1130 audit(1538863472.660:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpc-statd-notify comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.596042] audit: type=1130 audit(1538863472.660:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=teamviewerd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.004238] audit: type=1131 audit(1538863474.070:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.484125] wlp3s0: deauthenticated from 00:14:d1:cf:5b:98 (Reason: 3=DEAUTH_LEAVING)
[   17.487508] wlp3s0: authenticate with 00:14:d1:cf:5b:98
[   17.505199] wlp3s0: send auth to 00:14:d1:cf:5b:98 (try 1/3)
[   17.507122] wlp3s0: authenticated
[   17.509946] wlp3s0: associate with 00:14:d1:cf:5b:98 (try 1/3)
[   17.514033] wlp3s0: RX AssocResp from 00:14:d1:cf:5b:98 (capab=0x411 status=0 aid=3)
[   17.514200] wlp3s0: associated
[   26.643598] audit: type=1130 audit(1538863487.710:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   32.508257] audit: type=1131 audit(1538863493.573:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.012516] audit: type=1131 audit(1538863498.080:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  127.670275] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  168.627619] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  199.653803] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  229.658681] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  262.526726] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  311.883743] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  358.373598] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  361.547989] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  397.490721] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  432.719098] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  489.753570] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  520.780990] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  543.721277] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  597.888591] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  631.066442] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  689.639550] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  739.611096] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  743.092697] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  757.532382] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  796.340930] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  849.589309] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  879.592693] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  920.860163] ICMPv6: RA: ndisc_router_discovery failed to add default route
[  920.887103] audit: type=1130 audit(1538864382.311:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  920.887107] audit: type=1131 audit(1538864382.311:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  961.720329] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1001.551808] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1059.715258] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1109.994051] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1162.013677] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1204.821093] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1246.186744] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1305.681506] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1326.778704] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1362.206737] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1394.874915] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1427.231054] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1465.221661] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1501.983470] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1539.359720] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1561.788165] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1597.728178] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1630.807155] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1662.650022] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1698.902345] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1739.450469] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1766.897578] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1818.708597] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1864.893713] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1896.533074] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1933.911607] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 1987.567185] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2001.905823] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2036.924267] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2070.002116] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2126.319979] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2169.023619] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2203.124614] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2238.041636] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2278.999308] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2311.974818] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2362.865494] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2394.507179] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2441.918699] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2472.946126] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2506.431050] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2543.397661] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2546.674537] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2596.543555] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2617.026187] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2666.790504] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2685.122707] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2732.941251] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2761.103827] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2820.084177] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2850.089979] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2889.716591] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2920.132145] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2927.810750] ICMPv6: RA: ndisc_router_discovery failed to add default route
[ 2964.059388] ICMPv6: RA: ndisc_router_discovery failed to add default route

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2018-10-07 12:27 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-06 23:23 Two partitionless BTRFS drives no longer seen as containing BTRFS filesystem evan d
2018-10-07  0:32 ` Remi Gauvin
2018-10-07  6:08   ` evan d
2018-10-07  0:41 ` Qu Wenruo
2018-10-07  6:10   ` evan d
2018-10-07  6:26     ` Qu Wenruo
2018-10-07  6:47       ` evan d
2018-10-07  7:39         ` Qu Wenruo
2018-10-07  8:09           ` evan d
2018-10-07  8:19             ` Qu Wenruo
2018-10-07  8:28               ` evan d
2018-10-07  9:47                 ` Qu Wenruo
2018-10-07 10:39                   ` evan d
2018-10-07 10:51                     ` Qu Wenruo
2018-10-07 12:25                       ` evan d
2018-10-07 12:26                         ` evan d

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.