* [PATCH v2] iio: gyro: bmg160: only set power state if PM_RUNTIME is defined
@ 2014-09-08 14:05 Irina Tirdea
2014-09-09 22:14 ` Hartmut Knaack
0 siblings, 1 reply; 3+ messages in thread
From: Irina Tirdea @ 2014-09-08 14:05 UTC (permalink / raw)
To: Jonathan Cameron, linux-iio
Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald,
Srinivas Pandruvada, linux-kernel, Irina Tirdea
When CONFIG_PM_RUNTIME is not defined and bmg160 tries to power
off the device, bmg160_set_power_state will call pm_runtime_put_autosuspend,
which is not implemented (wil return -ENOSYS).
Only call bmg160_set_power_state when CONFIG_PM_RUNTIME is defined.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
---
Changes in v2:
- moved ifdef CONFIG_PM_RUNTIME inside bmg160_set_power_state as
Hartmut Knaack suggested
drivers/iio/gyro/bmg160.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
index 7524698..1f967e0d 100644
--- a/drivers/iio/gyro/bmg160.c
+++ b/drivers/iio/gyro/bmg160.c
@@ -237,6 +237,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
static int bmg160_set_power_state(struct bmg160_data *data, bool on)
{
+#ifdef CONFIG_PM_RUNTIME
int ret;
if (on)
@@ -251,6 +252,7 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on)
"Failed: bmg160_set_power_state for %d\n", on);
return ret;
}
+#endif
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] iio: gyro: bmg160: only set power state if PM_RUNTIME is defined
2014-09-08 14:05 [PATCH v2] iio: gyro: bmg160: only set power state if PM_RUNTIME is defined Irina Tirdea
@ 2014-09-09 22:14 ` Hartmut Knaack
2014-09-14 17:30 ` Jonathan Cameron
0 siblings, 1 reply; 3+ messages in thread
From: Hartmut Knaack @ 2014-09-09 22:14 UTC (permalink / raw)
To: Irina Tirdea, Jonathan Cameron, linux-iio
Cc: Lars-Peter Clausen, Peter Meerwald, Srinivas Pandruvada, linux-kernel
Irina Tirdea schrieb, Am 08.09.2014 16:05:
> When CONFIG_PM_RUNTIME is not defined and bmg160 tries to power
> off the device, bmg160_set_power_state will call pm_runtime_put_autosuspend,
> which is not implemented (wil return -ENOSYS).
>
> Only call bmg160_set_power_state when CONFIG_PM_RUNTIME is defined.
>
> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
> ---
>
> Changes in v2:
> - moved ifdef CONFIG_PM_RUNTIME inside bmg160_set_power_state as
> Hartmut Knaack suggested
>
> drivers/iio/gyro/bmg160.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
> index 7524698..1f967e0d 100644
> --- a/drivers/iio/gyro/bmg160.c
> +++ b/drivers/iio/gyro/bmg160.c
> @@ -237,6 +237,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
>
> static int bmg160_set_power_state(struct bmg160_data *data, bool on)
> {
> +#ifdef CONFIG_PM_RUNTIME
> int ret;
>
> if (on)
> @@ -251,6 +252,7 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on)
> "Failed: bmg160_set_power_state for %d\n", on);
> return ret;
> }
> +#endif
>
> return 0;
> }
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] iio: gyro: bmg160: only set power state if PM_RUNTIME is defined
2014-09-09 22:14 ` Hartmut Knaack
@ 2014-09-14 17:30 ` Jonathan Cameron
0 siblings, 0 replies; 3+ messages in thread
From: Jonathan Cameron @ 2014-09-14 17:30 UTC (permalink / raw)
To: Hartmut Knaack, Irina Tirdea, linux-iio
Cc: Lars-Peter Clausen, Peter Meerwald, Srinivas Pandruvada, linux-kernel
On 09/09/14 23:14, Hartmut Knaack wrote:
> Irina Tirdea schrieb, Am 08.09.2014 16:05:
>> When CONFIG_PM_RUNTIME is not defined and bmg160 tries to power
>> off the device, bmg160_set_power_state will call pm_runtime_put_autosuspend,
>> which is not implemented (wil return -ENOSYS).
>>
>> Only call bmg160_set_power_state when CONFIG_PM_RUNTIME is defined.
>>
>> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
> Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Applied to the togreg branch of iio.git. Initially pushed out as testing
for the autobuilders to play.
Thanks,
Jonathan
>> ---
>>
>> Changes in v2:
>> - moved ifdef CONFIG_PM_RUNTIME inside bmg160_set_power_state as
>> Hartmut Knaack suggested
>>
>> drivers/iio/gyro/bmg160.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
>> index 7524698..1f967e0d 100644
>> --- a/drivers/iio/gyro/bmg160.c
>> +++ b/drivers/iio/gyro/bmg160.c
>> @@ -237,6 +237,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
>>
>> static int bmg160_set_power_state(struct bmg160_data *data, bool on)
>> {
>> +#ifdef CONFIG_PM_RUNTIME
>> int ret;
>>
>> if (on)
>> @@ -251,6 +252,7 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on)
>> "Failed: bmg160_set_power_state for %d\n", on);
>> return ret;
>> }
>> +#endif
>>
>> return 0;
>> }
>>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-09-14 17:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-08 14:05 [PATCH v2] iio: gyro: bmg160: only set power state if PM_RUNTIME is defined Irina Tirdea
2014-09-09 22:14 ` Hartmut Knaack
2014-09-14 17:30 ` Jonathan Cameron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.