* Re: kernel BUG at mm/slab.c:610
@ 2007-03-14 13:55 Chris Rankin
0 siblings, 0 replies; 6+ messages in thread
From: Chris Rankin @ 2007-03-14 13:55 UTC (permalink / raw)
To: linux-kernel; +Cc: pupilla, penberg
Marco Berizzi wrote:
> Here is:
>
> Mar 14 03:42:25 Mimosa kernel: ------------[ cut here ]------------
> Mar 14 03:42:25 Mimosa kernel: kernel BUG at mm/slab.c:610!
> Mar 14 03:42:25 Mimosa kernel: invalid opcode: 0000 [#1]
> Mar 14 03:42:25 Mimosa kernel: Modules linked in: sch_sfq sch_htb
cls_fw
> nf_nat_pptp nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre
> nf_nat_ftp nf_conntrack_ftp 3c59x mii
> Mar 14 03:42:25 Mimosa kernel: CPU: 0
> Mar 14 03:42:25 Mimosa kernel: EIP: 0060:[<c014ca99>] Not
tainted
> VLI
> Mar 14 03:42:25 Mimosa kernel: EFLAGS: 00010046 (2.6.20 #1)
> Mar 14 03:42:25 Mimosa kernel: EIP is at free_block+0xd9/0xf0
> Mar 14 03:42:25 Mimosa kernel: eax: 00080000 ebx: c1000000 ecx:
> c0e7d4e0 edx: c101cfa0
> Mar 14 03:42:25 Mimosa kernel: esi: c1210000 edi: c1176560 ebp:
> 00000000 esp: c119bef0
> Mar 14 03:42:25 Mimosa kernel: ds: 007b es: 007b ss: 0068
> Mar 14 03:42:25 Mimosa kernel: Process events/0 (pid: 3, ti=c119a000
> task=c118f030 task.ti=c119a000)
> Mar 14 03:42:25 Mimosa kernel: Stack: c1213a10 161c9ed5 c1210010
> c1210010 c1210000 161c9ed5 c1176560 c014d201
> Mar 14 03:42:25 Mimosa kernel: 00000000 c1180420 c1176560
> c1180d60 c014d220 c014d26b 00000000 00000000
> Mar 14 03:42:25 Mimosa kernel: c03b7ae0 c03b7ae0 00000282
> c0123d37 00000000 c118f13c 0000007b 0000508b
> Mar 14 03:42:25 Mimosa kernel: Call Trace:
> Mar 14 03:42:25 Mimosa kernel: [<c014d201>] drain_array+0x91/0xb0
> Mar 14 03:42:25 Mimosa kernel: [<c014d220>] cache_reap+0x0/0xf0
> Mar 14 03:42:25 Mimosa kernel: [<c014d26b>] cache_reap+0x4b/0xf0
> Mar 14 03:42:25 Mimosa kernel: [<c0123d37>] run_workqueue+0x67/0x130
> Mar 14 03:42:25 Mimosa kernel: [<c0123f3a>] worker_thread+0x13a/0x170
> Mar 14 03:42:25 Mimosa kernel: [<c01123e0>]
> default_wake_function+0x0/0x10
> Mar 14 03:42:25 Mimosa kernel: [<c0112427>]
__wake_up_common+0x37/0x70
> Mar 14 03:42:25 Mimosa kernel: [<c01123e0>]
> default_wake_function+0x0/0x10
> Mar 14 03:42:25 Mimosa kernel: [<c0123e00>] worker_thread+0x0/0x170
> Mar 14 03:42:25 Mimosa kernel: [<c01271a6>] kthread+0xb6/0xc0
> Mar 14 03:42:25 Mimosa kernel: [<c01270f0>] kthread+0x0/0xc0
> Mar 14 03:42:25 Mimosa kernel: [<c01036a3>]
> kernel_thread_helper+0x7/0x14
> Mar 14 03:42:25 Mimosa kernel: =======================
> Mar 14 03:42:25 Mimosa kernel: Code: ff 83 c4 0c 5b 5e 5f 5d c3 8b 57
20
> 29 d0 89 da 89 46 18 89 f8 e8 78 f1 ff ff eb da 89 33 8b 46 04 89 5e
04
> 89 18 89 43 04 eb cb <0f> 0b 90 8d 74 26 00 eb fe 8b 52 0c e9 57 ff ff
> ff 8d b6 00 00
> Mar 14 03:42:25 Mimosa kernel: EIP: [<c014ca99>] free_block+0xd9/0xf0
> SS:ESP 0068:c119bef0
> Only to tell you, that on the console linux was printing
> this message:
> atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying
> access hardware directly.
That sounds familiar... I had similar trouble with 2.6.20.1 (running UP on a 200 MHz Pentium MMX
machine) when I unloaded the nf_conntrack_h323 kernel module. The messages continued until I
rebooted, although I never saw an oops. I am currently avoiding the problem by *not* unloading any
netfilter modules.
Cheers,
Chris
___________________________________________________________
All new Yahoo! Mail "The new Interface is stunning in its simplicity and ease of use." - PC Magazine
http://uk.docs.yahoo.com/nowyoucan.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel BUG at mm/slab.c:610
2007-03-14 11:54 Marco Berizzi
@ 2007-03-14 12:05 ` Pekka Enberg
0 siblings, 0 replies; 6+ messages in thread
From: Pekka Enberg @ 2007-03-14 12:05 UTC (permalink / raw)
To: Marco Berizzi; +Cc: linux-kernel
On 3/14/07, Marco Berizzi <pupilla@hotmail.com> wrote:
> Only to tell you, that on the console linux was printing
> this message:
>
> atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying
> access hardware directly.
Probably unrelated. CONFIG_SLAB_DEBUG should tell us what's corrupting the slab.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel BUG at mm/slab.c:610
@ 2007-03-14 11:54 Marco Berizzi
2007-03-14 12:05 ` Pekka Enberg
0 siblings, 1 reply; 6+ messages in thread
From: Marco Berizzi @ 2007-03-14 11:54 UTC (permalink / raw)
To: Pekka Enberg; +Cc: linux-kernel
Marco Berizzi wrote:
> Pekka Enberg wrote:
>
> Hi Pekka,
>
> > So, can you please repost the original oops?
>
> Here is:
>
> Mar 14 03:42:25 Mimosa kernel: ------------[ cut here ]------------
> Mar 14 03:42:25 Mimosa kernel: kernel BUG at mm/slab.c:610!
> Mar 14 03:42:25 Mimosa kernel: invalid opcode: 0000 [#1]
> Mar 14 03:42:25 Mimosa kernel: Modules linked in: sch_sfq sch_htb
cls_fw
> nf_nat_pptp nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre
> nf_nat_ftp nf_conntrack_ftp 3c59x mii
> Mar 14 03:42:25 Mimosa kernel: CPU: 0
> Mar 14 03:42:25 Mimosa kernel: EIP: 0060:[<c014ca99>] Not
tainted
> VLI
> Mar 14 03:42:25 Mimosa kernel: EFLAGS: 00010046 (2.6.20 #1)
> Mar 14 03:42:25 Mimosa kernel: EIP is at free_block+0xd9/0xf0
> Mar 14 03:42:25 Mimosa kernel: eax: 00080000 ebx: c1000000 ecx:
> c0e7d4e0 edx: c101cfa0
> Mar 14 03:42:25 Mimosa kernel: esi: c1210000 edi: c1176560 ebp:
> 00000000 esp: c119bef0
> Mar 14 03:42:25 Mimosa kernel: ds: 007b es: 007b ss: 0068
> Mar 14 03:42:25 Mimosa kernel: Process events/0 (pid: 3, ti=c119a000
> task=c118f030 task.ti=c119a000)
> Mar 14 03:42:25 Mimosa kernel: Stack: c1213a10 161c9ed5 c1210010
> c1210010 c1210000 161c9ed5 c1176560 c014d201
> Mar 14 03:42:25 Mimosa kernel: 00000000 c1180420 c1176560
> c1180d60 c014d220 c014d26b 00000000 00000000
> Mar 14 03:42:25 Mimosa kernel: c03b7ae0 c03b7ae0 00000282
> c0123d37 00000000 c118f13c 0000007b 0000508b
> Mar 14 03:42:25 Mimosa kernel: Call Trace:
> Mar 14 03:42:25 Mimosa kernel: [<c014d201>] drain_array+0x91/0xb0
> Mar 14 03:42:25 Mimosa kernel: [<c014d220>] cache_reap+0x0/0xf0
> Mar 14 03:42:25 Mimosa kernel: [<c014d26b>] cache_reap+0x4b/0xf0
> Mar 14 03:42:25 Mimosa kernel: [<c0123d37>] run_workqueue+0x67/0x130
> Mar 14 03:42:25 Mimosa kernel: [<c0123f3a>] worker_thread+0x13a/0x170
> Mar 14 03:42:25 Mimosa kernel: [<c01123e0>]
> default_wake_function+0x0/0x10
> Mar 14 03:42:25 Mimosa kernel: [<c0112427>]
__wake_up_common+0x37/0x70
> Mar 14 03:42:25 Mimosa kernel: [<c01123e0>]
> default_wake_function+0x0/0x10
> Mar 14 03:42:25 Mimosa kernel: [<c0123e00>] worker_thread+0x0/0x170
> Mar 14 03:42:25 Mimosa kernel: [<c01271a6>] kthread+0xb6/0xc0
> Mar 14 03:42:25 Mimosa kernel: [<c01270f0>] kthread+0x0/0xc0
> Mar 14 03:42:25 Mimosa kernel: [<c01036a3>]
> kernel_thread_helper+0x7/0x14
> Mar 14 03:42:25 Mimosa kernel: =======================
> Mar 14 03:42:25 Mimosa kernel: Code: ff 83 c4 0c 5b 5e 5f 5d c3 8b 57
20
> 29 d0 89 da 89 46 18 89 f8 e8 78 f1 ff ff eb da 89 33 8b 46 04 89 5e
04
> 89 18 89 43 04 eb cb <0f> 0b 90 8d 74 26 00 eb fe 8b 52 0c e9 57 ff ff
> ff 8d b6 00 00
> Mar 14 03:42:25 Mimosa kernel: EIP: [<c014ca99>] free_block+0xd9/0xf0
> SS:ESP 0068:c119bef0
Only to tell you, that on the console linux was printing
this message:
atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying
access hardware directly.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel BUG at mm/slab.c:610
2007-03-14 10:41 ` Pekka Enberg
@ 2007-03-14 11:21 ` Marco Berizzi
0 siblings, 0 replies; 6+ messages in thread
From: Marco Berizzi @ 2007-03-14 11:21 UTC (permalink / raw)
To: Pekka Enberg; +Cc: linux-kernel
Pekka Enberg wrote:
Hi Pekka,
> So, can you please repost the original oops?
Here is:
Mar 14 03:42:25 Mimosa kernel: ------------[ cut here ]------------
Mar 14 03:42:25 Mimosa kernel: kernel BUG at mm/slab.c:610!
Mar 14 03:42:25 Mimosa kernel: invalid opcode: 0000 [#1]
Mar 14 03:42:25 Mimosa kernel: Modules linked in: sch_sfq sch_htb cls_fw
nf_nat_pptp nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre
nf_nat_ftp nf_conntrack_ftp 3c59x mii
Mar 14 03:42:25 Mimosa kernel: CPU: 0
Mar 14 03:42:25 Mimosa kernel: EIP: 0060:[<c014ca99>] Not tainted
VLI
Mar 14 03:42:25 Mimosa kernel: EFLAGS: 00010046 (2.6.20 #1)
Mar 14 03:42:25 Mimosa kernel: EIP is at free_block+0xd9/0xf0
Mar 14 03:42:25 Mimosa kernel: eax: 00080000 ebx: c1000000 ecx:
c0e7d4e0 edx: c101cfa0
Mar 14 03:42:25 Mimosa kernel: esi: c1210000 edi: c1176560 ebp:
00000000 esp: c119bef0
Mar 14 03:42:25 Mimosa kernel: ds: 007b es: 007b ss: 0068
Mar 14 03:42:25 Mimosa kernel: Process events/0 (pid: 3, ti=c119a000
task=c118f030 task.ti=c119a000)
Mar 14 03:42:25 Mimosa kernel: Stack: c1213a10 161c9ed5 c1210010
c1210010 c1210000 161c9ed5 c1176560 c014d201
Mar 14 03:42:25 Mimosa kernel: 00000000 c1180420 c1176560
c1180d60 c014d220 c014d26b 00000000 00000000
Mar 14 03:42:25 Mimosa kernel: c03b7ae0 c03b7ae0 00000282
c0123d37 00000000 c118f13c 0000007b 0000508b
Mar 14 03:42:25 Mimosa kernel: Call Trace:
Mar 14 03:42:25 Mimosa kernel: [<c014d201>] drain_array+0x91/0xb0
Mar 14 03:42:25 Mimosa kernel: [<c014d220>] cache_reap+0x0/0xf0
Mar 14 03:42:25 Mimosa kernel: [<c014d26b>] cache_reap+0x4b/0xf0
Mar 14 03:42:25 Mimosa kernel: [<c0123d37>] run_workqueue+0x67/0x130
Mar 14 03:42:25 Mimosa kernel: [<c0123f3a>] worker_thread+0x13a/0x170
Mar 14 03:42:25 Mimosa kernel: [<c01123e0>]
default_wake_function+0x0/0x10
Mar 14 03:42:25 Mimosa kernel: [<c0112427>] __wake_up_common+0x37/0x70
Mar 14 03:42:25 Mimosa kernel: [<c01123e0>]
default_wake_function+0x0/0x10
Mar 14 03:42:25 Mimosa kernel: [<c0123e00>] worker_thread+0x0/0x170
Mar 14 03:42:25 Mimosa kernel: [<c01271a6>] kthread+0xb6/0xc0
Mar 14 03:42:25 Mimosa kernel: [<c01270f0>] kthread+0x0/0xc0
Mar 14 03:42:25 Mimosa kernel: [<c01036a3>]
kernel_thread_helper+0x7/0x14
Mar 14 03:42:25 Mimosa kernel: =======================
Mar 14 03:42:25 Mimosa kernel: Code: ff 83 c4 0c 5b 5e 5f 5d c3 8b 57 20
29 d0 89 da 89 46 18 89 f8 e8 78 f1 ff ff eb da 89 33 8b 46 04 89 5e 04
89 18 89 43 04 eb cb <0f> 0b 90 8d 74 26 00 eb fe 8b 52 0c e9 57 ff ff
ff 8d b6 00 00
Mar 14 03:42:25 Mimosa kernel: EIP: [<c014ca99>] free_block+0xd9/0xf0
SS:ESP 0068:c119bef0
Here is from another machine:
Mar 14 08:53:47 Gemini kernel: ------------[ cut here ]------------
Mar 14 08:53:47 Gemini kernel: kernel BUG at mm/slab.c:610!
Mar 14 08:53:47 Gemini kernel: invalid opcode: 0000 [#1]
Mar 14 08:53:47 Gemini kernel: Modules linked in: nf_nat_pptp
nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre nf_nat_ftp
nf_conntrack_ftp 3c59x mii
Mar 14 08:53:47 Gemini kernel: CPU: 0
Mar 14 08:53:47 Gemini kernel: EIP: 0060:[<c014ce86>] Not tainted
VLI
Mar 14 08:53:47 Gemini kernel: EFLAGS: 00010046 (2.6.20 #1)
Mar 14 08:53:47 Gemini kernel: EIP is at free_block+0xd6/0xf0
Mar 14 08:53:47 Gemini kernel: eax: 80000000 ebx: c1000000 ecx:
c9ae64e0 edx: c1135cc0
Mar 14 08:53:47 Gemini kernel: esi: c1210000 edi: c1176560 ebp:
00000000 esp: c119bef0
Mar 14 08:53:47 Gemini kernel: ds: 007b es: 007b ss: 0068
Mar 14 08:53:47 Gemini kernel: Process events/0 (pid: 3, ti=c119a000
task=c118f030 task.ti=c119a000)
Mar 14 08:53:47 Gemini kernel: Stack: c1179a10 110b04c7 c1210010
c1210010 c1210000 110b04c7 c1176560 c014d5f1
Mar 14 08:53:47 Gemini kernel: 00000000 c1180420 c1176560
c1180d60 c014d610 c014d65b 00000000 00000000
Mar 14 08:53:47 Gemini kernel: c03b7a60 c03b7a60 00000282
c0124157 00000000 c118f13c 00000076 00005e32
Mar 14 08:53:47 Gemini kernel: Call Trace:
Mar 14 08:53:47 Gemini kernel: [<c014d5f1>] drain_array+0x91/0xb0
Mar 14 08:53:47 Gemini kernel: [<c014d610>] cache_reap+0x0/0xf0
Mar 14 08:53:47 Gemini kernel: [<c014d65b>] cache_reap+0x4b/0xf0
Mar 14 08:53:47 Gemini kernel: [<c0124157>] run_workqueue+0x67/0x130
Mar 14 08:53:47 Gemini kernel: [<c012435a>] worker_thread+0x13a/0x170
Mar 14 08:53:47 Gemini kernel: [<c0112810>]
default_wake_function+0x0/0x10
Mar 14 08:53:47 Gemini kernel: [<c0112857>] __wake_up_common+0x37/0x70
Mar 14 08:53:47 Gemini kernel: [<c0112810>]
default_wake_function+0x0/0x10
Mar 14 08:53:47 Gemini kernel: [<c0124220>] worker_thread+0x0/0x170
Mar 14 08:53:47 Gemini kernel: [<c01275c6>] kthread+0xb6/0xc0
Mar 14 08:53:47 Gemini kernel: [<c0127510>] kthread+0x0/0xc0
Mar 14 08:53:47 Gemini kernel: [<c01036c7>]
kernel_thread_helper+0x7/0x10
Mar 14 08:53:47 Gemini kernel: =======================
Mar 14 08:53:47 Gemini kernel: Code: ff 83 c4 0c 5b 5e 5f 5d c3 8b 57 20
29 d0 89 da 89 46 18 89 f8 e8 7b f1 ff ff eb da 89 33 8b 46 04 89 5e 04
89 18 89 43 04 eb cb <0f> 0b 90 8d b4 26 00 00 00 00 eb fe 8b 52 0c e9
57 ff ff ff 8d
Mar 14 08:53:47 Gemini kernel: EIP: [<c014ce86>] free_block+0xd6/0xf0
SS:ESP 0068:c119bef0
> Also, please enable
> CONFIG_DEBUG_SLAB and try to reproduce. Thanks.
I'm rebuilding all kernel with this option (2.6.20.3)
Thanks for the feedback.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: kernel BUG at mm/slab.c:610
2007-03-14 9:11 Marco Berizzi
@ 2007-03-14 10:41 ` Pekka Enberg
2007-03-14 11:21 ` Marco Berizzi
0 siblings, 1 reply; 6+ messages in thread
From: Pekka Enberg @ 2007-03-14 10:41 UTC (permalink / raw)
To: Marco Berizzi; +Cc: linux-kernel
Hi Marco,
On 3/14/07, Marco Berizzi <pupilla@hotmail.com> wrote:
> Hello everybody. Sorry for posting to this list, but I'm pretty lost.
Don't worry, this is the proper mailing list for bug reports.
On 3/14/07, Marco Berizzi <pupilla@hotmail.com> wrote:
> I don't think this is related to buggy hardware because it is happening
> on 3 different boxes with the same hardware config.
No, looks like someone is feeding a bad pointer to slab. The debug
check is relatively new and in previous kernels the problem would
might have gone unnoticed causing silent corruption of the slab.
On 3/14/07, Marco Berizzi <pupilla@hotmail.com> wrote:
> ksymoops 2.4.10 on i686 2.6.20. Options used
>From Documentation/oops-tracing.txt:
"NOTE: ksymoops is useless on 2.6. Please use the Oops in its original format
(from dmesg, etc). Ignore any references in this or other docs to "decoding
the Oops" or "running it through ksymoops". If you post an Oops from 2.6 that
has been run through ksymoops, people will just tell you to repost it."
So, can you please repost the original oops? Also, please enable
CONFIG_DEBUG_SLAB and try to reproduce. Thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
* kernel BUG at mm/slab.c:610
@ 2007-03-14 9:11 Marco Berizzi
2007-03-14 10:41 ` Pekka Enberg
0 siblings, 1 reply; 6+ messages in thread
From: Marco Berizzi @ 2007-03-14 9:11 UTC (permalink / raw)
To: linux-kernel
Hello everybody. Sorry for posting to this list,
but I'm pretty lost.
I'm experimenting this kernel panic on 3 different
slackware linux boxes. The harware is the same, and
also the .config with vanilla 2.6.20
I don't think this is related to buggy hardware
because it is happening on 3 different boxes with
the same hardware config.
Unfortunately the bug isn't reproducible but it is
happening at least once a week.
May anoybody point me the step to try to spot this
bug?
TIA
ksymoops 2.4.10 on i686 2.6.20. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.20/ (default)
-m /usr/src/linux/System.map (default)
Warning: You did not tell me where to find symbol
information. I will
assume that the log matches the kernel and modules that are
running
right now and I'll use the default options above for symbol
resolution.
If the current kernel and/or modules do not match the log,
you can get
more accurate output by telling me the kernel version and
where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
ksymoops: No such file or directory
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Mar 14 03:42:25 Mimosa kernel: kernel BUG at mm/slab.c:610!
Mar 14 03:42:25 Mimosa kernel: CPU: 0
Mar 14 03:42:25 Mimosa kernel: EIP: 0060:[<c014ca99>]
Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
Mar 14 03:42:25 Mimosa kernel: EFLAGS: 00010046 (2.6.20 #1)
Mar 14 03:42:25 Mimosa kernel: eax: 00080000 ebx: c1000000
ecx: c0e7d4e0 edx: c101cfa0
Mar 14 03:42:25 Mimosa kernel: esi: c1210000 edi: c1176560
ebp: 00000000 esp: c119bef0
Mar 14 03:42:25 Mimosa kernel: ds: 007b es: 007b ss: 0068
Mar 14 03:42:25 Mimosa kernel: Stack: c1213a10 161c9ed5
c1210010 c1210010 c1210000 161c9ed5 c1176560 c014d201
Mar 14 03:42:25 Mimosa kernel: 00000000 c1180420
c1176560 c1180d60 c014d220 c014d26b 00000000 00000000
Mar 14 03:42:25 Mimosa kernel: c03b7ae0 c03b7ae0
00000282 c0123d37 00000000 c118f13c 0000007b 0000508b
Mar 14 03:42:25 Mimosa kernel: Call Trace:
Mar 14 03:42:25 Mimosa kernel: [<c014d201>]
drain_array+0x91/0xb0
Mar 14 03:42:25 Mimosa kernel: [<c014d220>] cache_reap+0x0/0xf0
Mar 14 03:42:25 Mimosa kernel: [<c014d26b>]
cache_reap+0x4b/0xf0
Mar 14 03:42:25 Mimosa kernel: [<c0123d37>]
run_workqueue+0x67/0x130
Mar 14 03:42:25 Mimosa kernel: [<c0123f3a>]
worker_thread+0x13a/0x170
Mar 14 03:42:25 Mimosa kernel: [<c01123e0>]
default_wake_function+0x0/0x10
Mar 14 03:42:25 Mimosa kernel: [<c0112427>]
__wake_up_common+0x37/0x70
Mar 14 03:42:25 Mimosa kernel: [<c01123e0>]
default_wake_function+0x0/0x10
Mar 14 03:42:25 Mimosa kernel: [<c0123e00>]
worker_thread+0x0/0x170
Mar 14 03:42:25 Mimosa kernel: [<c01271a6>] kthread+0xb6/0xc0
Mar 14 03:42:25 Mimosa kernel: [<c01270f0>] kthread+0x0/0xc0
Mar 14 03:42:25 Mimosa kernel: [<c01036a3>]
kernel_thread_helper+0x7/0x14
Mar 14 03:42:25 Mimosa kernel: Code: ff 83 c4 0c 5b 5e 5f 5d
c3 8b 57 20 29 d0 89 da 89 46 18 89 f8 e8 78 f1 ff ff eb da
89 33 8b 46 04 89 5e 04 89 18 89 43 04 eb cb <0f> 0b 90 8d
74 26 00 eb fe 8b 52 0c e9 57 ff ff ff 8d b6 00 00
>>EIP; c014ca99 <free_block+d9/f0> <=====
>>ebx; c1000000 <pg0+c3b000/3fc39400>
>>ecx; c0e7d4e0 <pg0+ab84e0/3fc39400>
>>edx; c101cfa0 <pg0+c57fa0/3fc39400>
>>esi; c1210000 <pg0+e4b000/3fc39400>
>>edi; c1176560 <pg0+db1560/3fc39400>
>>esp; c119bef0 <pg0+dd6ef0/3fc39400>
Trace; c014d201 <drain_array+91/b0>
Trace; c014d220 <cache_reap+0/f0>
Trace; c014d26b <cache_reap+4b/f0>
Trace; c0123d37 <run_workqueue+67/130>
Trace; c0123f3a <worker_thread+13a/170>
Trace; c01123e0 <default_wake_function+0/10>
Trace; c0112427 <__wake_up_common+37/70>
Trace; c01123e0 <default_wake_function+0/10>
Trace; c0123e00 <worker_thread+0/170>
Trace; c01271a6 <kthread+b6/c0>
Trace; c01270f0 <kthread+0/c0>
Trace; c01036a3 <kernel_thread_helper+7/14>
This architecture has variable length instructions, decoding
before eip
is unreliable, take these instructions with a pinch of salt.
Code; c014ca6e <free_block+ae/f0>
00000000 <_EIP>:
Code; c014ca6e <free_block+ae/f0>
0: ff 83 c4 0c 5b 5e incl 0x5e5b0cc4(%ebx)
Code; c014ca74 <free_block+b4/f0>
6: 5f pop %edi
Code; c014ca75 <free_block+b5/f0>
7: 5d pop %ebp
Code; c014ca76 <free_block+b6/f0>
8: c3 ret
Code; c014ca77 <free_block+b7/f0>
9: 8b 57 20 mov 0x20(%edi),%edx
Code; c014ca7a <free_block+ba/f0>
c: 29 d0 sub %edx,%eax
Code; c014ca7c <free_block+bc/f0>
e: 89 da mov %ebx,%edx
Code; c014ca7e <free_block+be/f0>
10: 89 46 18 mov %eax,0x18(%esi)
Code; c014ca81 <free_block+c1/f0>
13: 89 f8 mov %edi,%eax
Code; c014ca83 <free_block+c3/f0>
15: e8 78 f1 ff ff call fffff192
<_EIP+0xfffff192>
Code; c014ca88 <free_block+c8/f0>
1a: eb da jmp fffffff6
<_EIP+0xfffffff6>
Code; c014ca8a <free_block+ca/f0>
1c: 89 33 mov %esi,(%ebx)
Code; c014ca8c <free_block+cc/f0>
1e: 8b 46 04 mov 0x4(%esi),%eax
Code; c014ca8f <free_block+cf/f0>
21: 89 5e 04 mov %ebx,0x4(%esi)
Code; c014ca92 <free_block+d2/f0>
24: 89 18 mov %ebx,(%eax)
Code; c014ca94 <free_block+d4/f0>
26: 89 43 04 mov %eax,0x4(%ebx)
Code; c014ca97 <free_block+d7/f0>
29: eb cb jmp fffffff6
<_EIP+0xfffffff6>
This decode from eip onwards should be reliable
Code; c014ca99 <free_block+d9/f0>
00000000 <_EIP>:
Code; c014ca99 <free_block+d9/f0> <=====
0: 0f 0b ud2a <=====
Code; c014ca9b <free_block+db/f0>
2: 90 nop
Code; c014ca9c <free_block+dc/f0>
3: 8d 74 26 00 lea 0x0(%esi),%esi
Code; c014caa0 <free_block+e0/f0>
7: eb fe jmp 7 <_EIP+0x7>
Code; c014caa2 <free_block+e2/f0>
9: 8b 52 0c mov 0xc(%edx),%edx
Code; c014caa5 <free_block+e5/f0>
c: e9 57 ff ff ff jmp ffffff68
<_EIP+0xffffff68>
Code; c014caaa <free_block+ea/f0>
11: 8d .byte 0x8d
Code; c014caab <free_block+eb/f0>
12: b6 00 mov $0x0,%dh
Mar 14 03:42:25 Mimosa kernel: EIP: [<c014ca99>]
free_block+0xd9/0xf0 SS:ESP 0068:c119bef0
Warning (Oops_read): Code line not seen, dumping what data
is available
>>EIP; c014ca99 <free_block+d9/f0> <=====
2 warnings and 1 error issued. Results may not be reliable.
dmesg output:
Linux version 2.6.20 (root@Mimosa) (gcc version 3.3.5) #1
Mon Feb 5 18:21:36 CET 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size:
000000000009f800 end: 000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size:
0000000000000800 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000dc000 size:
0000000000004000 end: 00000000000e0000 type: 2
copy_e820_map() start: 00000000000f0000 size:
0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size:
0000000009f00000 end: 000000000a000000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 00000000ffff0000 size:
0000000000010000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000a000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
160MB LOWMEM available.
Entering add_active_range(0, 0, 40960) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 40960
early_node_map[1] active PFN ranges
0: 0 -> 40960
On node 0 totalpages: 40960
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 288 pages used for memmap
Normal zone: 36576 pages, LIFO batch:7
DMI 2.1 present.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 10000000 (gap:
0a000000:f5ff0000)
Detected 267.295 MHz processor.
Built 1 zonelists. Total pages: 40640
Kernel command line: auto BOOT_IMAGE=Linux ro root=301
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01141000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 159064k/163840k available (1915k kernel code, 4348k
reserved, 595k data, 160k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
vmalloc : 0xca800000 - 0xfffb5000 ( 855 MB)
lowmem : 0xc0000000 - 0xca000000 ( 160 MB)
.init : 0xc0376000 - 0xc039e000 ( 160 kB)
.data : 0xc02ded64 - 0xc0373af4 ( 595 kB)
.text : 0xc0100000 - 0xc02ded64 (1915 kB)
Checking if this processor honours the WP bit even in
supervisor mode... Ok.
Calibrating delay using timer specific routine.. 535.18
BogoMIPS (lpj=1070374)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000
00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: After all inits, caps: 0183f9ff 00000000 00000000
00000040 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel Celeron (Covington) stepping 00
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfda61, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
* Found PM-Timer Bug on the chipset. Due to workarounds for
a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region 6100-613f claimed by PIIX4 ACPI
PCI quirk: region 5f00-5f0f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI: Bridge: 0000:00:01.0
IO window: b000-bfff
MEM window: efe00000-efefffff
PREFETCH window: e5c00000-e7cfffff
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
SGI XFS with no debug enabled
io scheduler noop registered
io scheduler deadline registered (default)
Limiting direct PCI/PCI transfers.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA,
hdd:pio
Probing IDE interface ide0...
hda: QUANTUM FIREBALL EX3.2A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CRD-8160B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 6306048 sectors (3228 MB) w/418KiB Cache,
CHS=6256/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
nf_conntrack version 0.5.0 (1280 buckets, 10240 max)
input: AT Translated Set 2 keyboard as /class/input/input0
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Filesystem "hda1": Disabling barriers, not supported by the
underlying device
XFS mounting filesystem hda1
Starting XFS recovery on filesystem: hda1 (logdev: internal)
Ending XFS recovery on filesystem: hda1 (logdev: internal)
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 160k freed
Adding 330584k swap on /dev/hda9. Priority:-1 extents:1
across:330584k
Filesystem "hda1": Disabling barriers, not supported by the
underlying device
Filesystem "hda1": Disabling barriers, not supported by the
underlying device
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:09.0
3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
0000:00:09.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001dc00.
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:0a.0
0000:00:0a.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001da00.
PCI: setting IRQ 9 as level-triggered
PCI: Found IRQ 9 for device 0000:00:0b.0
PCI: Sharing IRQ 9 with 0000:00:07.2
0000:00:0b.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001d800.
Filesystem "hda5": Disabling barriers, not supported by the
underlying device
XFS mounting filesystem hda5
Starting XFS recovery on filesystem: hda5 (logdev: internal)
Ending XFS recovery on filesystem: hda5 (logdev: internal)
Filesystem "hda6": Disabling barriers, not supported by the
underlying device
XFS mounting filesystem hda6
Starting XFS recovery on filesystem: hda6 (logdev: internal)
Ending XFS recovery on filesystem: hda6 (logdev: internal)
Filesystem "hda7": Disabling barriers, not supported by the
underlying device
XFS mounting filesystem hda7
Starting XFS recovery on filesystem: hda7 (logdev: internal)
Ending XFS recovery on filesystem: hda7 (logdev: internal)
Filesystem "hda8": Disabling barriers, not supported by the
underlying device
XFS mounting filesystem hda8
Starting XFS recovery on filesystem: hda8 (logdev: internal)
Ending XFS recovery on filesystem: hda8 (logdev: internal)
eth0: setting full-duplex.
eth1: setting full-duplex.
eth2: setting full-duplex.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20
# Mon Feb 5 16:33:07 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
CONFIG_MPENTIUMII=y
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_COMPAT_VDSO=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_HT_IRQ is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=y
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#
# CONFIG_HID is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Virtualization
#
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_AES is not set
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-03-14 13:55 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-14 13:55 kernel BUG at mm/slab.c:610 Chris Rankin
-- strict thread matches above, loose matches on Subject: below --
2007-03-14 11:54 Marco Berizzi
2007-03-14 12:05 ` Pekka Enberg
2007-03-14 9:11 Marco Berizzi
2007-03-14 10:41 ` Pekka Enberg
2007-03-14 11:21 ` Marco Berizzi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.