All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Markus Pargmann <mpa@pengutronix.de>, Wim Van Sebroeck <wim@iguana.be>
Cc: Support Opensource <support.opensource@diasemi.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de
Subject: Re: [PATCH v7] watchdog: Add DA9063 PMIC watchdog driver.
Date: Sun, 28 Sep 2014 10:19:56 -0700	[thread overview]
Message-ID: <5428433C.6060901@roeck-us.net> (raw)
In-Reply-To: <1411923945-3538-1-git-send-email-mpa@pengutronix.de>

On 09/28/2014 10:05 AM, Markus Pargmann wrote:
> From: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
>
> This driver supports the watchdog device inside the DA9063 PMIC.
>
> Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Thanks for your patience,
Guenter

> ---
>
> Notes:
>      Changes in v7:
>       - Remove unnecessary range checks
>       - Realign line breaks
>       - Cleanup use of unsigned int for selector and timeouts
>
>      Changes in v6:
>       - Fix compile error
>
>      Changes in v5:
>       - Kconfig: Add note about the module name.
>       - Change selector variables to int
>       - Style fixes
>       - use unsigned int to remove gcc verbose warning
>       - Integrate _kick() and _disable() into the calling functions
>
>      Changes in v4:
>       - Fixed indentation
>       - Fixed lock without unlock
>       - Check for parent device and device driver data in probe(). If not present,
>         this is an invalid prober initialization, return -EINVAL.
>
>      Changes in v3:
>       - Cleanup error handling for timeout selection and setting
>       - Fix race condition due to late wdt drvdata setup
>       - Remove static struct watchdog_device. It is not initialized in the probe
>         function
>       - Use WATCHDOG_NOWAYOUT_INIT_STATUS for the status
>       - Remove 0 shift using DA9063_TWDSCALE_SHIFT
>
>   drivers/watchdog/Kconfig      |   9 ++
>   drivers/watchdog/Makefile     |   1 +
>   drivers/watchdog/da9063_wdt.c | 191 ++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 201 insertions(+)
>   create mode 100644 drivers/watchdog/da9063_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f57312fced80..669de63a7a48 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -87,6 +87,15 @@ config DA9055_WATCHDOG
>   	  This driver can also be built as a module.  If so, the module
>   	  will be called da9055_wdt.
>
> +config DA9063_WATCHDOG
> +	tristate "Dialog DA9063 Watchdog"
> +	depends on MFD_DA9063
> +	select WATCHDOG_CORE
> +	help
> +	  Support for the watchdog in the DA9063 PMIC.
> +
> +	  This driver can be built as a module. The module name is da9063_wdt.
> +
>   config GPIO_WATCHDOG
>   	tristate "Watchdog device controlled through GPIO-line"
>   	depends on OF_GPIO
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 468c3204c3b1..6c467a9821fe 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -173,6 +173,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
>   # Architecture Independent
>   obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
>   obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> +obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
>   obj-$(CONFIG_GPIO_WATCHDOG)	+= gpio_wdt.o
>   obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
>   obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
> new file mode 100644
> index 000000000000..2cd6b2c2dd2a
> --- /dev/null
> +++ b/drivers/watchdog/da9063_wdt.c
> @@ -0,0 +1,191 @@
> +/*
> + * Watchdog driver for DA9063 PMICs.
> + *
> + * Copyright(c) 2012 Dialog Semiconductor Ltd.
> + *
> + * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/watchdog.h>
> +#include <linux/platform_device.h>
> +#include <linux/uaccess.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/mfd/da9063/registers.h>
> +#include <linux/mfd/da9063/core.h>
> +#include <linux/regmap.h>
> +
> +/*
> + * Watchdog selector to timeout in seconds.
> + *   0: WDT disabled;
> + *   others: timeout = 2048 ms * 2^(TWDSCALE-1).
> + */
> +static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
> +#define DA9063_TWDSCALE_DISABLE		0
> +#define DA9063_TWDSCALE_MIN		1
> +#define DA9063_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
> +#define DA9063_WDT_MIN_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MIN]
> +#define DA9063_WDT_MAX_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MAX]
> +#define DA9063_WDG_TIMEOUT		wdt_timeout[3]
> +
> +struct da9063_watchdog {
> +	struct da9063 *da9063;
> +	struct watchdog_device wdtdev;
> +};
> +
> +static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs)
> +{
> +	unsigned int i;
> +
> +	for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) {
> +		if (wdt_timeout[i] >= secs)
> +			return i;
> +	}
> +
> +	return DA9063_TWDSCALE_MAX;
> +}
> +
> +static int _da9063_wdt_set_timeout(struct da9063 *da9063, unsigned int regval)
> +{
> +	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
> +				  DA9063_TWDSCALE_MASK, regval);
> +}
> +
> +static int da9063_wdt_start(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	unsigned int selector;
> +	int ret;
> +
> +	selector = da9063_wdt_timeout_to_sel(wdt->wdtdev.timeout);
> +	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
> +	if (ret)
> +		dev_err(wdt->da9063->dev, "Watchdog failed to start (err = %d)\n",
> +			ret);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	int ret;
> +
> +	ret = regmap_update_bits(wdt->da9063->regmap, DA9063_REG_CONTROL_D,
> +				 DA9063_TWDSCALE_MASK, DA9063_TWDSCALE_DISABLE);
> +	if (ret)
> +		dev_alert(wdt->da9063->dev, "Watchdog failed to stop (err = %d)\n",
> +			  ret);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_ping(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	int ret;
> +
> +	ret = regmap_write(wdt->da9063->regmap, DA9063_REG_CONTROL_F,
> +			   DA9063_WATCHDOG);
> +	if (ret)
> +		dev_alert(wdt->da9063->dev, "Failed to ping the watchdog (err = %d)\n",
> +			  ret);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
> +				  unsigned int timeout)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	unsigned int selector;
> +	int ret;
> +
> +	selector = da9063_wdt_timeout_to_sel(timeout);
> +	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
> +	if (ret)
> +		dev_err(wdt->da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
> +			ret);
> +	else
> +		wdd->timeout = wdt_timeout[selector];
> +
> +	return ret;
> +}
> +
> +static const struct watchdog_info da9063_watchdog_info = {
> +	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> +	.identity = "DA9063 Watchdog",
> +};
> +
> +static const struct watchdog_ops da9063_watchdog_ops = {
> +	.owner = THIS_MODULE,
> +	.start = da9063_wdt_start,
> +	.stop = da9063_wdt_stop,
> +	.ping = da9063_wdt_ping,
> +	.set_timeout = da9063_wdt_set_timeout,
> +};
> +
> +static int da9063_wdt_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct da9063 *da9063;
> +	struct da9063_watchdog *wdt;
> +
> +	if (!pdev->dev.parent)
> +		return -EINVAL;
> +
> +	da9063 = dev_get_drvdata(pdev->dev.parent);
> +	if (!da9063)
> +		return -EINVAL;
> +
> +	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> +	if (!wdt)
> +		return -ENOMEM;
> +
> +	wdt->da9063 = da9063;
> +
> +	wdt->wdtdev.info = &da9063_watchdog_info;
> +	wdt->wdtdev.ops = &da9063_watchdog_ops;
> +	wdt->wdtdev.min_timeout = DA9063_WDT_MIN_TIMEOUT;
> +	wdt->wdtdev.max_timeout = DA9063_WDT_MAX_TIMEOUT;
> +	wdt->wdtdev.timeout = DA9063_WDG_TIMEOUT;
> +
> +	wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
> +
> +	watchdog_set_drvdata(&wdt->wdtdev, wdt);
> +	dev_set_drvdata(&pdev->dev, wdt);
> +
> +	ret = watchdog_register_device(&wdt->wdtdev);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_remove(struct platform_device *pdev)
> +{
> +	struct da9063_watchdog *wdt = dev_get_drvdata(&pdev->dev);
> +
> +	watchdog_unregister_device(&wdt->wdtdev);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver da9063_wdt_driver = {
> +	.probe = da9063_wdt_probe,
> +	.remove = da9063_wdt_remove,
> +	.driver = {
> +		.name = DA9063_DRVNAME_WATCHDOG,
> +	},
> +};
> +module_platform_driver(da9063_wdt_driver);
> +
> +MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>");
> +MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG);
>


WARNING: multiple messages have this Message-ID (diff)
From: linux@roeck-us.net (Guenter Roeck)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7] watchdog: Add DA9063 PMIC watchdog driver.
Date: Sun, 28 Sep 2014 10:19:56 -0700	[thread overview]
Message-ID: <5428433C.6060901@roeck-us.net> (raw)
In-Reply-To: <1411923945-3538-1-git-send-email-mpa@pengutronix.de>

On 09/28/2014 10:05 AM, Markus Pargmann wrote:
> From: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
>
> This driver supports the watchdog device inside the DA9063 PMIC.
>
> Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Thanks for your patience,
Guenter

> ---
>
> Notes:
>      Changes in v7:
>       - Remove unnecessary range checks
>       - Realign line breaks
>       - Cleanup use of unsigned int for selector and timeouts
>
>      Changes in v6:
>       - Fix compile error
>
>      Changes in v5:
>       - Kconfig: Add note about the module name.
>       - Change selector variables to int
>       - Style fixes
>       - use unsigned int to remove gcc verbose warning
>       - Integrate _kick() and _disable() into the calling functions
>
>      Changes in v4:
>       - Fixed indentation
>       - Fixed lock without unlock
>       - Check for parent device and device driver data in probe(). If not present,
>         this is an invalid prober initialization, return -EINVAL.
>
>      Changes in v3:
>       - Cleanup error handling for timeout selection and setting
>       - Fix race condition due to late wdt drvdata setup
>       - Remove static struct watchdog_device. It is not initialized in the probe
>         function
>       - Use WATCHDOG_NOWAYOUT_INIT_STATUS for the status
>       - Remove 0 shift using DA9063_TWDSCALE_SHIFT
>
>   drivers/watchdog/Kconfig      |   9 ++
>   drivers/watchdog/Makefile     |   1 +
>   drivers/watchdog/da9063_wdt.c | 191 ++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 201 insertions(+)
>   create mode 100644 drivers/watchdog/da9063_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f57312fced80..669de63a7a48 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -87,6 +87,15 @@ config DA9055_WATCHDOG
>   	  This driver can also be built as a module.  If so, the module
>   	  will be called da9055_wdt.
>
> +config DA9063_WATCHDOG
> +	tristate "Dialog DA9063 Watchdog"
> +	depends on MFD_DA9063
> +	select WATCHDOG_CORE
> +	help
> +	  Support for the watchdog in the DA9063 PMIC.
> +
> +	  This driver can be built as a module. The module name is da9063_wdt.
> +
>   config GPIO_WATCHDOG
>   	tristate "Watchdog device controlled through GPIO-line"
>   	depends on OF_GPIO
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 468c3204c3b1..6c467a9821fe 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -173,6 +173,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
>   # Architecture Independent
>   obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
>   obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> +obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
>   obj-$(CONFIG_GPIO_WATCHDOG)	+= gpio_wdt.o
>   obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
>   obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
> new file mode 100644
> index 000000000000..2cd6b2c2dd2a
> --- /dev/null
> +++ b/drivers/watchdog/da9063_wdt.c
> @@ -0,0 +1,191 @@
> +/*
> + * Watchdog driver for DA9063 PMICs.
> + *
> + * Copyright(c) 2012 Dialog Semiconductor Ltd.
> + *
> + * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/watchdog.h>
> +#include <linux/platform_device.h>
> +#include <linux/uaccess.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/mfd/da9063/registers.h>
> +#include <linux/mfd/da9063/core.h>
> +#include <linux/regmap.h>
> +
> +/*
> + * Watchdog selector to timeout in seconds.
> + *   0: WDT disabled;
> + *   others: timeout = 2048 ms * 2^(TWDSCALE-1).
> + */
> +static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
> +#define DA9063_TWDSCALE_DISABLE		0
> +#define DA9063_TWDSCALE_MIN		1
> +#define DA9063_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
> +#define DA9063_WDT_MIN_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MIN]
> +#define DA9063_WDT_MAX_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MAX]
> +#define DA9063_WDG_TIMEOUT		wdt_timeout[3]
> +
> +struct da9063_watchdog {
> +	struct da9063 *da9063;
> +	struct watchdog_device wdtdev;
> +};
> +
> +static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs)
> +{
> +	unsigned int i;
> +
> +	for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) {
> +		if (wdt_timeout[i] >= secs)
> +			return i;
> +	}
> +
> +	return DA9063_TWDSCALE_MAX;
> +}
> +
> +static int _da9063_wdt_set_timeout(struct da9063 *da9063, unsigned int regval)
> +{
> +	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
> +				  DA9063_TWDSCALE_MASK, regval);
> +}
> +
> +static int da9063_wdt_start(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	unsigned int selector;
> +	int ret;
> +
> +	selector = da9063_wdt_timeout_to_sel(wdt->wdtdev.timeout);
> +	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
> +	if (ret)
> +		dev_err(wdt->da9063->dev, "Watchdog failed to start (err = %d)\n",
> +			ret);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	int ret;
> +
> +	ret = regmap_update_bits(wdt->da9063->regmap, DA9063_REG_CONTROL_D,
> +				 DA9063_TWDSCALE_MASK, DA9063_TWDSCALE_DISABLE);
> +	if (ret)
> +		dev_alert(wdt->da9063->dev, "Watchdog failed to stop (err = %d)\n",
> +			  ret);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_ping(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	int ret;
> +
> +	ret = regmap_write(wdt->da9063->regmap, DA9063_REG_CONTROL_F,
> +			   DA9063_WATCHDOG);
> +	if (ret)
> +		dev_alert(wdt->da9063->dev, "Failed to ping the watchdog (err = %d)\n",
> +			  ret);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
> +				  unsigned int timeout)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	unsigned int selector;
> +	int ret;
> +
> +	selector = da9063_wdt_timeout_to_sel(timeout);
> +	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
> +	if (ret)
> +		dev_err(wdt->da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
> +			ret);
> +	else
> +		wdd->timeout = wdt_timeout[selector];
> +
> +	return ret;
> +}
> +
> +static const struct watchdog_info da9063_watchdog_info = {
> +	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> +	.identity = "DA9063 Watchdog",
> +};
> +
> +static const struct watchdog_ops da9063_watchdog_ops = {
> +	.owner = THIS_MODULE,
> +	.start = da9063_wdt_start,
> +	.stop = da9063_wdt_stop,
> +	.ping = da9063_wdt_ping,
> +	.set_timeout = da9063_wdt_set_timeout,
> +};
> +
> +static int da9063_wdt_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct da9063 *da9063;
> +	struct da9063_watchdog *wdt;
> +
> +	if (!pdev->dev.parent)
> +		return -EINVAL;
> +
> +	da9063 = dev_get_drvdata(pdev->dev.parent);
> +	if (!da9063)
> +		return -EINVAL;
> +
> +	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> +	if (!wdt)
> +		return -ENOMEM;
> +
> +	wdt->da9063 = da9063;
> +
> +	wdt->wdtdev.info = &da9063_watchdog_info;
> +	wdt->wdtdev.ops = &da9063_watchdog_ops;
> +	wdt->wdtdev.min_timeout = DA9063_WDT_MIN_TIMEOUT;
> +	wdt->wdtdev.max_timeout = DA9063_WDT_MAX_TIMEOUT;
> +	wdt->wdtdev.timeout = DA9063_WDG_TIMEOUT;
> +
> +	wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
> +
> +	watchdog_set_drvdata(&wdt->wdtdev, wdt);
> +	dev_set_drvdata(&pdev->dev, wdt);
> +
> +	ret = watchdog_register_device(&wdt->wdtdev);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_remove(struct platform_device *pdev)
> +{
> +	struct da9063_watchdog *wdt = dev_get_drvdata(&pdev->dev);
> +
> +	watchdog_unregister_device(&wdt->wdtdev);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver da9063_wdt_driver = {
> +	.probe = da9063_wdt_probe,
> +	.remove = da9063_wdt_remove,
> +	.driver = {
> +		.name = DA9063_DRVNAME_WATCHDOG,
> +	},
> +};
> +module_platform_driver(da9063_wdt_driver);
> +
> +MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>");
> +MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG);
>

  reply	other threads:[~2014-09-28 17:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-28 17:05 [PATCH v7] watchdog: Add DA9063 PMIC watchdog driver Markus Pargmann
2014-09-28 17:05 ` Markus Pargmann
2014-09-28 17:19 ` Guenter Roeck [this message]
2014-09-28 17:19   ` Guenter Roeck
2014-09-28 17:27   ` Markus Pargmann
2014-09-28 17:27     ` Markus Pargmann
2014-09-29  7:55 ` Opensource [Steve Twiss]
2014-09-29  7:55   ` Opensource [Steve Twiss]
2014-09-29 13:39 ` Opensource [Steve Twiss]
2014-09-29 13:39   ` Opensource [Steve Twiss]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5428433C.6060901@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=mpa@pengutronix.de \
    --cc=p.zabel@pengutronix.de \
    --cc=support.opensource@diasemi.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.