* ARMADA 370 - Kernel panic during boot
@ 2014-09-29 10:09 post at twien.net
2014-09-29 10:47 ` Gregory CLEMENT
0 siblings, 1 reply; 8+ messages in thread
From: post at twien.net @ 2014-09-29 10:09 UTC (permalink / raw)
To: linux-arm-kernel
I'm trying to run the linux 3.16.3 kernel on a custom board based on the
ARMADA 370 (88F6W11).
The bootloader (U-boot) is the latest from Marvell. A custom .dts file
is created for the board.
The Kernel panics during initialization. See screen dump.
The error occurs when trying to read the interrupt control register (on
this line:)
control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
=> Unhandled fault: external abort on non-linefetch (0x1008) at
0xf0000a00
Any hint in which direction to look is welcome. The MMU?
Thanks, Tormod
Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.16.3 (tormod at TW-Dell) (gcc version 4.6.4
(Linaro GCC branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K
MAXPAGESIZE ALIGN) ) #13 SMP Wed Sep 24 14:45:08 CEST 2014
[ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
cache
[ 0.000000] Machine model: Marvell Armada 370 Ethernet Prototype
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Truncating RAM at 0x00000000-0x40000000 to -0x2f800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] PERCPU: Embedded 7 pages/cpu @ef137000 s5952 r8192 d14528
u32768
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs
rw nfsroot=193.71.72.30:/srv/nfs4/fs ip=dhcp earlyprintk
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04ba004 (4809 kB)
[ 0.000000] .init : 0xc04bb000 - 0xc04e9740 ( 186 kB)
[ 0.000000] .data : 0xc04ea000 - 0xc050f880 ( 151 kB)
[ 0.000000] .bss : 0xc050f888 - 0xc0544afc ( 213 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Unhandled fault: external abort on non-linefetch (0x1008)
at 0xf0000a00
[ 0.000000] Internal error: : 1008 [#1] SMP ARM
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.3 #13
[ 0.000000] task: c04f4c60 ti: c04ea000 task.ti: c04ea000
[ 0.000000] PC is at armada_370_xp_mpic_of_init+0xf8/0x1dc
[ 0.000000] LR is at ioremap_page_range+0xf4/0x19c
[ 0.000000] pc : [<c04ccda8>] lr : [<c01f06d4>] psr: a00001d3
[ 0.000000] sp : c04ebee0 ip : c04ebe78 fp : c04ebf44
[ 0.000000] r10: 00100100 r9 : 00200200 r8 : c04e6f00
[ 0.000000] r7 : 00000000 r6 : c0538cc0 r5 : 00000000 r4 :
ef144300
[ 0.000000] r3 : f0000a00 r2 : 00000000 r1 : d0021e13 r0 :
f0002870
[ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM
Segment kernel
[ 0.000000] Control: 10c5387d Table: 00004019 DAC: 00000015
[ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc04ea248)
[ 0.000000] Stack: (0xc04ebee0 to 0xc04ec000)
[ 0.000000] bee0: 00000000 ef144300 d0020a00 d0020bcf ef144358
00000200 00000000 00000000
[ 0.000000] bf00: 00000000 d0021870 d00218c7 ef144358 00000200
00000000 00000000 00000000
[ 0.000000] bf20: c02b3260 eec023c0 c04ebf48 c04ebf48 00000000
c04e6f00 c04ebf84 c04ebf48
[ 0.000000] bf40: c04d1dc8 c04cccbc c04ebf48 c04ebf48 c04ebf50
c04ebf50 ef7fcd00 c04e375c
[ 0.000000] bf60: c050f8c0 c04e376c ef7fcd00 00004059 561f5811
00000000 c04ebf94 c04ebf88
[ 0.000000] bf80: c04ccca4 c04d1c6c c04ebfa4 c04ebf98 c04c1528
c04ccc9c c04ebfbc c04ebfa8
[ 0.000000] bfa0: c04bc68c c04c1524 c04f27dc ffffffff c04ebff4
c04ebfc0 c04bbabc c04bc66c
[ 0.000000] bfc0: ffffffff ffffffff c04bb668 00000000 00000000
c04e376c c050fb54 c04f23fc
[ 0.000000] bfe0: c04e3768 c04f5c10 00000000 c04ebff8 00008074
c04bb8d4 00000000 00000000
[ 0.000000] Backtrace:
[ 0.000000] [<c04cccb0>] (armada_370_xp_mpic_of_init) from
[<c04d1dc8>] (of_irq_init+0x168/0x2a4)
[ 0.000000] r8:c04e6f00 r7:00000000 r6:c04ebf48 r5:c04ebf48
r4:eec023c0
[ 0.000000] [<c04d1c60>] (of_irq_init) from [<c04ccca4>]
(irqchip_init+0x14/0x20)
[ 0.000000] r10:00000000 r9:561f5811 r8:00004059 r7:ef7fcd00
r6:c04e376c r5:c050f8c0
[ 0.000000] r4:c04e375c
[ 0.000000] [<c04ccc90>] (irqchip_init) from [<c04c1528>]
(mvebu_init_irq+0x10/0x5c)
[ 0.000000] [<c04c1518>] (mvebu_init_irq) from [<c04bc68c>]
(init_IRQ+0x2c/0x84)
[ 0.000000] [<c04bc660>] (init_IRQ) from [<c04bbabc>]
(start_kernel+0x1f4/0x318)
[ 0.000000] r4:ffffffff r3:c04f27dc
[ 0.000000] [<c04bb8c8>] (start_kernel) from [<00008074>] (0x8074)
[ 0.000000] r7:c04f5c10 r6:c04e3768 r5:c04f23fc r4:c050fb54
[ 0.000000] Code: e3500000 1a000000 e7f001f2 e5963000 (e5937000)
[ 0.000000] ---[ end trace 3406ff24bd97382e ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle
task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill
the idle task!
^ permalink raw reply [flat|nested] 8+ messages in thread
* ARMADA 370 - Kernel panic during boot
2014-09-29 10:09 ARMADA 370 - Kernel panic during boot post at twien.net
@ 2014-09-29 10:47 ` Gregory CLEMENT
2014-09-29 11:25 ` post at twien.net
0 siblings, 1 reply; 8+ messages in thread
From: Gregory CLEMENT @ 2014-09-29 10:47 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tormod,
On 29/09/2014 12:09, post at twien.net wrote:
> I'm trying to run the linux 3.16.3 kernel on a custom board based on the
> ARMADA 370 (88F6W11).
> The bootloader (U-boot) is the latest from Marvell. A custom .dts file
> is created for the board.
Could you send your dts file and your .config ? it will help us to understand
what happens. Maybe you have a wrong address in your dts.
> The Kernel panics during initialization. See screen dump.
> The error occurs when trying to read the interrupt control register (on
> this line:)
>
> control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
> => Unhandled fault: external abort on non-linefetch (0x1008) at
> 0xf0000a00
It is not the first access on this register so it's surprising that it
crashes here.
>
> Any hint in which direction to look is welcome. The MMU?
I put the other mvebu maintainer in copy and also the main developer on
this SoC to see if it something familiar to them.
Gregory
>
> Thanks, Tormod
>
>
> Booting Linux on physical CPU 0x0
> [ 0.000000] Linux version 3.16.3 (tormod at TW-Dell) (gcc version 4.6.4
> (Linaro GCC branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K
> MAXPAGESIZE ALIGN) ) #13 SMP Wed Sep 24 14:45:08 CEST 2014
> [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7),
> cr=10c5387d
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
> cache
> [ 0.000000] Machine model: Marvell Armada 370 Ethernet Prototype
> [ 0.000000] bootconsole [earlycon0] enabled
> [ 0.000000] Truncating RAM at 0x00000000-0x40000000 to -0x2f800000
> [ 0.000000] Memory policy: Data cache writeback
> [ 0.000000] CPU: All CPU(s) started in SVC mode.
> [ 0.000000] PERCPU: Embedded 7 pages/cpu @ef137000 s5952 r8192 d14528
> u32768
> [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs
> rw nfsroot=193.71.72.30:/srv/nfs4/fs ip=dhcp earlyprintk
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
> [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
> [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc04ba004 (4809 kB)
> [ 0.000000] .init : 0xc04bb000 - 0xc04e9740 ( 186 kB)
> [ 0.000000] .data : 0xc04ea000 - 0xc050f880 ( 151 kB)
> [ 0.000000] .bss : 0xc050f888 - 0xc0544afc ( 213 kB)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
> Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
> nr_cpu_ids=1
> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
> [ 0.000000] Unhandled fault: external abort on non-linefetch (0x1008)
> at 0xf0000a00
> [ 0.000000] Internal error: : 1008 [#1] SMP ARM
> [ 0.000000] Modules linked in:
> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.3 #13
> [ 0.000000] task: c04f4c60 ti: c04ea000 task.ti: c04ea000
> [ 0.000000] PC is at armada_370_xp_mpic_of_init+0xf8/0x1dc
> [ 0.000000] LR is at ioremap_page_range+0xf4/0x19c
> [ 0.000000] pc : [<c04ccda8>] lr : [<c01f06d4>] psr: a00001d3
> [ 0.000000] sp : c04ebee0 ip : c04ebe78 fp : c04ebf44
> [ 0.000000] r10: 00100100 r9 : 00200200 r8 : c04e6f00
> [ 0.000000] r7 : 00000000 r6 : c0538cc0 r5 : 00000000 r4 :
> ef144300
> [ 0.000000] r3 : f0000a00 r2 : 00000000 r1 : d0021e13 r0 :
> f0002870
> [ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM
> Segment kernel
> [ 0.000000] Control: 10c5387d Table: 00004019 DAC: 00000015
> [ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc04ea248)
> [ 0.000000] Stack: (0xc04ebee0 to 0xc04ec000)
> [ 0.000000] bee0: 00000000 ef144300 d0020a00 d0020bcf ef144358
> 00000200 00000000 00000000
> [ 0.000000] bf00: 00000000 d0021870 d00218c7 ef144358 00000200
> 00000000 00000000 00000000
> [ 0.000000] bf20: c02b3260 eec023c0 c04ebf48 c04ebf48 00000000
> c04e6f00 c04ebf84 c04ebf48
> [ 0.000000] bf40: c04d1dc8 c04cccbc c04ebf48 c04ebf48 c04ebf50
> c04ebf50 ef7fcd00 c04e375c
> [ 0.000000] bf60: c050f8c0 c04e376c ef7fcd00 00004059 561f5811
> 00000000 c04ebf94 c04ebf88
> [ 0.000000] bf80: c04ccca4 c04d1c6c c04ebfa4 c04ebf98 c04c1528
> c04ccc9c c04ebfbc c04ebfa8
> [ 0.000000] bfa0: c04bc68c c04c1524 c04f27dc ffffffff c04ebff4
> c04ebfc0 c04bbabc c04bc66c
> [ 0.000000] bfc0: ffffffff ffffffff c04bb668 00000000 00000000
> c04e376c c050fb54 c04f23fc
> [ 0.000000] bfe0: c04e3768 c04f5c10 00000000 c04ebff8 00008074
> c04bb8d4 00000000 00000000
> [ 0.000000] Backtrace:
> [ 0.000000] [<c04cccb0>] (armada_370_xp_mpic_of_init) from
> [<c04d1dc8>] (of_irq_init+0x168/0x2a4)
> [ 0.000000] r8:c04e6f00 r7:00000000 r6:c04ebf48 r5:c04ebf48
> r4:eec023c0
> [ 0.000000] [<c04d1c60>] (of_irq_init) from [<c04ccca4>]
> (irqchip_init+0x14/0x20)
> [ 0.000000] r10:00000000 r9:561f5811 r8:00004059 r7:ef7fcd00
> r6:c04e376c r5:c050f8c0
> [ 0.000000] r4:c04e375c
> [ 0.000000] [<c04ccc90>] (irqchip_init) from [<c04c1528>]
> (mvebu_init_irq+0x10/0x5c)
> [ 0.000000] [<c04c1518>] (mvebu_init_irq) from [<c04bc68c>]
> (init_IRQ+0x2c/0x84)
> [ 0.000000] [<c04bc660>] (init_IRQ) from [<c04bbabc>]
> (start_kernel+0x1f4/0x318)
> [ 0.000000] r4:ffffffff r3:c04f27dc
> [ 0.000000] [<c04bb8c8>] (start_kernel) from [<00008074>] (0x8074)
> [ 0.000000] r7:c04f5c10 r6:c04e3768 r5:c04f23fc r4:c050fb54
> [ 0.000000] Code: e3500000 1a000000 e7f001f2 e5963000 (e5937000)
> [ 0.000000] ---[ end trace 3406ff24bd97382e ]---
> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle
> task!
> [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill
> the idle task!
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* ARMADA 370 - Kernel panic during boot
2014-09-29 10:47 ` Gregory CLEMENT
@ 2014-09-29 11:25 ` post at twien.net
2014-09-29 12:46 ` Gregory CLEMENT
2014-09-29 13:57 ` Thomas Petazzoni
0 siblings, 2 replies; 8+ messages in thread
From: post at twien.net @ 2014-09-29 11:25 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Thanks for your reply.
Here are my .config and .dts files.
BR,
Tormod
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.16.3 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
#
# Multiple platform selection
#
#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_MVEBU_V7=y
CONFIG_MACH_ARMADA_370=y
# CONFIG_MACH_ARMADA_375 is not set
# CONFIG_MACH_ARMADA_38X is not set
# CONFIG_MACH_ARMADA_XP is not set
# CONFIG_MACH_DOVE is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HI3xxx is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MXC is not set
#
# TI OMAP/AM/DM/DRA Family
#
# CONFIG_ARCH_OMAP3 is not set
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set
CONFIG_PLAT_ORION=y
#
# Processor Type
#
CONFIG_CPU_PJ4B=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_CACHE_FEROCEON_L2=y
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
CONFIG_CACHE_PL310=y
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_IWMMXT=y
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_PJ4B_ERRATA_4742=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_643719 is not set
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_764369 is not set
# CONFIG_ARM_ERRATA_775420 is not set
# CONFIG_ARM_ERRATA_798181 is not set
# CONFIG_ARM_ERRATA_773022 is not set
#
# Bus support
#
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
#
# PCI host controller drivers
#
CONFIG_PCI_MVEBU=y
# CONFIG_PCI_HOST_GENERIC is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not set
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
# CONFIG_MCPM is not set
# CONFIG_BIG_LITTLE is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=4
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_SCHED_HRTICK is not set
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_XEN is not set
#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
CONFIG_CMDLINE=""
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
# CONFIG_NEON is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
#
# Power management options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_PN533 is not set
# CONFIG_NFC_SIM is not set
CONFIG_NFC_PN544=y
# CONFIG_NFC_MICROREAD is not set
# CONFIG_NFC_ST21NFCA is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
# CONFIG_DMA_SHARED_BUFFER is not set
#
# Bus devices
#
# CONFIG_BRCMSTB_GISB_ARB is not set
CONFIG_MVEBU_MBUS=y
# CONFIG_ARM_CCI is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_OF_SELFTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
# CONFIG_ECHO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MV643XX_ETH is not set
CONFIG_MVMDIO=y
CONFIG_MVNETA=y
CONFIG_SKGE=y
# CONFIG_SKGE_GENESIS is not set
# CONFIG_SKY2 is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_SH_ETH is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_AMD_XGBE_PHY is not set
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_ORION is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional
clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_IPQ8064 is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_370=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_ZEVIO is not set
CONFIG_GPIO_MVEBU=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_GRGPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_BCM_KONA is not set
#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_ORION_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_MEN_A21_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
#
# Direct Rendering Manager
#
# CONFIG_DRM is not set
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_VGASTATE is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_ORION=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
CONFIG_USB_GPIO_VBUS=y
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_ULPI is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_CLKGATE=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_MVSDIO=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_MV_XOR=y
# CONFIG_FSL_EDMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
#
# SOC (System On Chip) specific Drivers
#
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_QCOM is not set
CONFIG_MVEBU_CLK_COMMON=y
CONFIG_MVEBU_CLK_CPU=y
CONFIG_MVEBU_CLK_COREDIV=y
CONFIG_ARMADA_370_CLK=y
#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ARMADA_370_XP_TIMER=y
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=7
# CONFIG_BOOT_PRINTK_DELAY is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_MODULE is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_MVEBU_UART is not set
CONFIG_DEBUG_MVEBU_UART_ALTERNATE=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
# CONFIG_DEBUG_LL_UART_8250 is not set
# CONFIG_DEBUG_LL_UART_PL01X is not set
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
# CONFIG_DEBUG_UART_PL01X is not set
CONFIG_DEBUG_UART_8250=y
CONFIG_DEBUG_UART_PHYS=0xf1012000
CONFIG_DEBUG_UART_VIRT=0xf1012000
CONFIG_DEBUG_UART_8250_SHIFT=2
# CONFIG_DEBUG_UART_8250_WORD is not set
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_DEBUG_UNCOMPRESS=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_EARLY_PRINTK=y
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_MV_CESA is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
# CONFIG_VIRTUALIZATION is not set
/*
* Device Tree file for Marvell Armada 370 Ethernet Prototype board
* ()
*
* Copied from arch/arm/boot/dts/armada-370-rd.dts
*
* Copyright (C) 2014 ...
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
model = "Marvell Armada 370 Ethernet Prototype";
compatible = "marvell,armada370", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 root=/dev/nfs rw
nfsroot=193.71.72.30:/srv/nfs4/fs ip=dhcp earlyprintk";
};
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
pcie at 1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Internal mini-PCIe connector */
pcie at 2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
internal-regs {
serial at 12000 {
status = "okay";
};
mdio {
phy0: ethernet-phy at 0 {
reg = <0>;
};
};
ethernet at 70000 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
mvsdio at d4000 {
pinctrl-0 = <&sdio_pins1>;
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
broken-cd;
};
usb at 50000 {
status = "okay";
};
i2c at 11000 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
clock-frequency = <100000>;
status = "okay";
};
nand at d0000 {
status = "okay";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
partition at 0 {
label = "U-Boot";
reg = <0 0x800000>;
};
partition at 800000 {
label = "Linux";
reg = <0x800000 0x800000>;
};
partition at 1000000 {
label = "Filesystem";
reg = <0x1000000 0x3f000000>;
};
};
};
};
};
On 2014-09-29 12:47, Gregory CLEMENT wrote:
> Hi Tormod,
>
> On 29/09/2014 12:09, post at twien.net wrote:
>> I'm trying to run the linux 3.16.3 kernel on a custom board based on
>> the
>> ARMADA 370 (88F6W11).
>> The bootloader (U-boot) is the latest from Marvell. A custom .dts file
>> is created for the board.
>
> Could you send your dts file and your .config ? it will help us to
> understand
> what happens. Maybe you have a wrong address in your dts.
>
>> The Kernel panics during initialization. See screen dump.
>> The error occurs when trying to read the interrupt control register
>> (on
>> this line:)
>>
>> control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
>> => Unhandled fault: external abort on non-linefetch (0x1008) at
>> 0xf0000a00
>
> It is not the first access on this register so it's surprising that it
> crashes here.
>
>>
>> Any hint in which direction to look is welcome. The MMU?
>
> I put the other mvebu maintainer in copy and also the main developer on
> this SoC to see if it something familiar to them.
>
> Gregory
>>
>> Thanks, Tormod
>>
>>
>> Booting Linux on physical CPU 0x0
>> [ 0.000000] Linux version 3.16.3 (tormod at TW-Dell) (gcc version
>> 4.6.4
>> (Linaro GCC branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K
>> MAXPAGESIZE ALIGN) ) #13 SMP Wed Sep 24 14:45:08 CEST 2014
>> [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7),
>> cr=10c5387d
>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT
>> instruction
>> cache
>> [ 0.000000] Machine model: Marvell Armada 370 Ethernet Prototype
>> [ 0.000000] bootconsole [earlycon0] enabled
>> [ 0.000000] Truncating RAM at 0x00000000-0x40000000 to -0x2f800000
>> [ 0.000000] Memory policy: Data cache writeback
>> [ 0.000000] CPU: All CPU(s) started in SVC mode.
>> [ 0.000000] PERCPU: Embedded 7 pages/cpu @ef137000 s5952 r8192
>> d14528
>> u32768
>> [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs
>> rw nfsroot=193.71.72.30:/srv/nfs4/fs ip=dhcp earlyprintk
>> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
>> 524288
>> bytes)
>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
>> bytes)
>> [ 0.000000] Virtual kernel memory layout:
>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
>> [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
>> [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
>> [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
>> [ 0.000000] .text : 0xc0008000 - 0xc04ba004 (4809 kB)
>> [ 0.000000] .init : 0xc04bb000 - 0xc04e9740 ( 186 kB)
>> [ 0.000000] .data : 0xc04ea000 - 0xc050f880 ( 151 kB)
>> [ 0.000000] .bss : 0xc050f888 - 0xc0544afc ( 213 kB)
>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
>> Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
>> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
>> nr_cpu_ids=1
>> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>> [ 0.000000] Unhandled fault: external abort on non-linefetch
>> (0x1008)
>> at 0xf0000a00
>> [ 0.000000] Internal error: : 1008 [#1] SMP ARM
>> [ 0.000000] Modules linked in:
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.3 #13
>> [ 0.000000] task: c04f4c60 ti: c04ea000 task.ti: c04ea000
>> [ 0.000000] PC is at armada_370_xp_mpic_of_init+0xf8/0x1dc
>> [ 0.000000] LR is at ioremap_page_range+0xf4/0x19c
>> [ 0.000000] pc : [<c04ccda8>] lr : [<c01f06d4>] psr: a00001d3
>> [ 0.000000] sp : c04ebee0 ip : c04ebe78 fp : c04ebf44
>> [ 0.000000] r10: 00100100 r9 : 00200200 r8 : c04e6f00
>> [ 0.000000] r7 : 00000000 r6 : c0538cc0 r5 : 00000000 r4 :
>> ef144300
>> [ 0.000000] r3 : f0000a00 r2 : 00000000 r1 : d0021e13 r0 :
>> f0002870
>> [ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM
>> Segment kernel
>> [ 0.000000] Control: 10c5387d Table: 00004019 DAC: 00000015
>> [ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc04ea248)
>> [ 0.000000] Stack: (0xc04ebee0 to 0xc04ec000)
>> [ 0.000000] bee0: 00000000 ef144300 d0020a00 d0020bcf ef144358
>> 00000200 00000000 00000000
>> [ 0.000000] bf00: 00000000 d0021870 d00218c7 ef144358 00000200
>> 00000000 00000000 00000000
>> [ 0.000000] bf20: c02b3260 eec023c0 c04ebf48 c04ebf48 00000000
>> c04e6f00 c04ebf84 c04ebf48
>> [ 0.000000] bf40: c04d1dc8 c04cccbc c04ebf48 c04ebf48 c04ebf50
>> c04ebf50 ef7fcd00 c04e375c
>> [ 0.000000] bf60: c050f8c0 c04e376c ef7fcd00 00004059 561f5811
>> 00000000 c04ebf94 c04ebf88
>> [ 0.000000] bf80: c04ccca4 c04d1c6c c04ebfa4 c04ebf98 c04c1528
>> c04ccc9c c04ebfbc c04ebfa8
>> [ 0.000000] bfa0: c04bc68c c04c1524 c04f27dc ffffffff c04ebff4
>> c04ebfc0 c04bbabc c04bc66c
>> [ 0.000000] bfc0: ffffffff ffffffff c04bb668 00000000 00000000
>> c04e376c c050fb54 c04f23fc
>> [ 0.000000] bfe0: c04e3768 c04f5c10 00000000 c04ebff8 00008074
>> c04bb8d4 00000000 00000000
>> [ 0.000000] Backtrace:
>> [ 0.000000] [<c04cccb0>] (armada_370_xp_mpic_of_init) from
>> [<c04d1dc8>] (of_irq_init+0x168/0x2a4)
>> [ 0.000000] r8:c04e6f00 r7:00000000 r6:c04ebf48 r5:c04ebf48
>> r4:eec023c0
>> [ 0.000000] [<c04d1c60>] (of_irq_init) from [<c04ccca4>]
>> (irqchip_init+0x14/0x20)
>> [ 0.000000] r10:00000000 r9:561f5811 r8:00004059 r7:ef7fcd00
>> r6:c04e376c r5:c050f8c0
>> [ 0.000000] r4:c04e375c
>> [ 0.000000] [<c04ccc90>] (irqchip_init) from [<c04c1528>]
>> (mvebu_init_irq+0x10/0x5c)
>> [ 0.000000] [<c04c1518>] (mvebu_init_irq) from [<c04bc68c>]
>> (init_IRQ+0x2c/0x84)
>> [ 0.000000] [<c04bc660>] (init_IRQ) from [<c04bbabc>]
>> (start_kernel+0x1f4/0x318)
>> [ 0.000000] r4:ffffffff r3:c04f27dc
>> [ 0.000000] [<c04bb8c8>] (start_kernel) from [<00008074>] (0x8074)
>> [ 0.000000] r7:c04f5c10 r6:c04e3768 r5:c04f23fc r4:c050fb54
>> [ 0.000000] Code: e3500000 1a000000 e7f001f2 e5963000 (e5937000)
>> [ 0.000000] ---[ end trace 3406ff24bd97382e ]---
>> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle
>> task!
>> [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill
>> the idle task!
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
^ permalink raw reply [flat|nested] 8+ messages in thread
* ARMADA 370 - Kernel panic during boot
2014-09-29 11:25 ` post at twien.net
@ 2014-09-29 12:46 ` Gregory CLEMENT
2014-09-29 13:57 ` Thomas Petazzoni
1 sibling, 0 replies; 8+ messages in thread
From: Gregory CLEMENT @ 2014-09-29 12:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On 29/09/2014 13:25, post at twien.net wrote:
> Hi,
> Thanks for your reply.
> Here are my .config and .dts files.
I built a kernel with your .config and then also your dts on an other
Armada 370 based board and I didn't get any issue during the initialization
of the MPIC.
I think that your issue could come either from your bootloader or from
your hardware itself.
Gregory
> BR,
> Tormod
>> On 29/09/2014 12:09, post at twien.net wrote:
>>> I'm trying to run the linux 3.16.3 kernel on a custom board based on
>>> the
>>> ARMADA 370 (88F6W11).
>>> The bootloader (U-boot) is the latest from Marvell. A custom .dts file
>>> is created for the board.
[...]
>>> The Kernel panics during initialization. See screen dump.
>>> The error occurs when trying to read the interrupt control register
>>> (on
>>> this line:)
>>>
>>> control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
>>> => Unhandled fault: external abort on non-linefetch (0x1008) at
>>> 0xf0000a00
>>
>> It is not the first access on this register so it's surprising that it
>> crashes here.
>>
>>>
>>> Any hint in which direction to look is welcome. The MMU?
>>
>> I put the other mvebu maintainer in copy and also the main developer on
>> this SoC to see if it something familiar to them.
>>
>> Gregory
>>>
>>> Thanks, Tormod
>>>
>>>
>>> Booting Linux on physical CPU 0x0
>>> [ 0.000000] Linux version 3.16.3 (tormod at TW-Dell) (gcc version
>>> 4.6.4
>>> (Linaro GCC branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K
>>> MAXPAGESIZE ALIGN) ) #13 SMP Wed Sep 24 14:45:08 CEST 2014
>>> [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7),
>>> cr=10c5387d
>>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT
>>> instruction
>>> cache
>>> [ 0.000000] Machine model: Marvell Armada 370 Ethernet Prototype
>>> [ 0.000000] bootconsole [earlycon0] enabled
>>> [ 0.000000] Truncating RAM at 0x00000000-0x40000000 to -0x2f800000
>>> [ 0.000000] Memory policy: Data cache writeback
>>> [ 0.000000] CPU: All CPU(s) started in SVC mode.
>>> [ 0.000000] PERCPU: Embedded 7 pages/cpu @ef137000 s5952 r8192
>>> d14528
>>> u32768
>>> [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nfs
>>> rw nfsroot=193.71.72.30:/srv/nfs4/fs ip=dhcp earlyprintk
>>> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
>>> 524288
>>> bytes)
>>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
>>> bytes)
>>> [ 0.000000] Virtual kernel memory layout:
>>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>>> [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
>>> [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
>>> [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
>>> [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
>>> [ 0.000000] .text : 0xc0008000 - 0xc04ba004 (4809 kB)
>>> [ 0.000000] .init : 0xc04bb000 - 0xc04e9740 ( 186 kB)
>>> [ 0.000000] .data : 0xc04ea000 - 0xc050f880 ( 151 kB)
>>> [ 0.000000] .bss : 0xc050f888 - 0xc0544afc ( 213 kB)
>>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
>>> Nodes=1
>>> [ 0.000000] Hierarchical RCU implementation.
>>> [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
>>> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
>>> nr_cpu_ids=1
>>> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>>> [ 0.000000] Unhandled fault: external abort on non-linefetch
>>> (0x1008)
>>> at 0xf0000a00
>>> [ 0.000000] Internal error: : 1008 [#1] SMP ARM
>>> [ 0.000000] Modules linked in:
>>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.3 #13
>>> [ 0.000000] task: c04f4c60 ti: c04ea000 task.ti: c04ea000
>>> [ 0.000000] PC is at armada_370_xp_mpic_of_init+0xf8/0x1dc
>>> [ 0.000000] LR is at ioremap_page_range+0xf4/0x19c
>>> [ 0.000000] pc : [<c04ccda8>] lr : [<c01f06d4>] psr: a00001d3
>>> [ 0.000000] sp : c04ebee0 ip : c04ebe78 fp : c04ebf44
>>> [ 0.000000] r10: 00100100 r9 : 00200200 r8 : c04e6f00
>>> [ 0.000000] r7 : 00000000 r6 : c0538cc0 r5 : 00000000 r4 :
>>> ef144300
>>> [ 0.000000] r3 : f0000a00 r2 : 00000000 r1 : d0021e13 r0 :
>>> f0002870
>>> [ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM
>>> Segment kernel
>>> [ 0.000000] Control: 10c5387d Table: 00004019 DAC: 00000015
>>> [ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc04ea248)
>>> [ 0.000000] Stack: (0xc04ebee0 to 0xc04ec000)
>>> [ 0.000000] bee0: 00000000 ef144300 d0020a00 d0020bcf ef144358
>>> 00000200 00000000 00000000
>>> [ 0.000000] bf00: 00000000 d0021870 d00218c7 ef144358 00000200
>>> 00000000 00000000 00000000
>>> [ 0.000000] bf20: c02b3260 eec023c0 c04ebf48 c04ebf48 00000000
>>> c04e6f00 c04ebf84 c04ebf48
>>> [ 0.000000] bf40: c04d1dc8 c04cccbc c04ebf48 c04ebf48 c04ebf50
>>> c04ebf50 ef7fcd00 c04e375c
>>> [ 0.000000] bf60: c050f8c0 c04e376c ef7fcd00 00004059 561f5811
>>> 00000000 c04ebf94 c04ebf88
>>> [ 0.000000] bf80: c04ccca4 c04d1c6c c04ebfa4 c04ebf98 c04c1528
>>> c04ccc9c c04ebfbc c04ebfa8
>>> [ 0.000000] bfa0: c04bc68c c04c1524 c04f27dc ffffffff c04ebff4
>>> c04ebfc0 c04bbabc c04bc66c
>>> [ 0.000000] bfc0: ffffffff ffffffff c04bb668 00000000 00000000
>>> c04e376c c050fb54 c04f23fc
>>> [ 0.000000] bfe0: c04e3768 c04f5c10 00000000 c04ebff8 00008074
>>> c04bb8d4 00000000 00000000
>>> [ 0.000000] Backtrace:
>>> [ 0.000000] [<c04cccb0>] (armada_370_xp_mpic_of_init) from
>>> [<c04d1dc8>] (of_irq_init+0x168/0x2a4)
>>> [ 0.000000] r8:c04e6f00 r7:00000000 r6:c04ebf48 r5:c04ebf48
>>> r4:eec023c0
>>> [ 0.000000] [<c04d1c60>] (of_irq_init) from [<c04ccca4>]
>>> (irqchip_init+0x14/0x20)
>>> [ 0.000000] r10:00000000 r9:561f5811 r8:00004059 r7:ef7fcd00
>>> r6:c04e376c r5:c050f8c0
>>> [ 0.000000] r4:c04e375c
>>> [ 0.000000] [<c04ccc90>] (irqchip_init) from [<c04c1528>]
>>> (mvebu_init_irq+0x10/0x5c)
>>> [ 0.000000] [<c04c1518>] (mvebu_init_irq) from [<c04bc68c>]
>>> (init_IRQ+0x2c/0x84)
>>> [ 0.000000] [<c04bc660>] (init_IRQ) from [<c04bbabc>]
>>> (start_kernel+0x1f4/0x318)
>>> [ 0.000000] r4:ffffffff r3:c04f27dc
>>> [ 0.000000] [<c04bb8c8>] (start_kernel) from [<00008074>] (0x8074)
>>> [ 0.000000] r7:c04f5c10 r6:c04e3768 r5:c04f23fc r4:c050fb54
>>> [ 0.000000] Code: e3500000 1a000000 e7f001f2 e5963000 (e5937000)
>>> [ 0.000000] ---[ end trace 3406ff24bd97382e ]---
>>> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle
>>> task!
>>> [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill
>>> the idle task!
>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* ARMADA 370 - Kernel panic during boot
2014-09-29 11:25 ` post at twien.net
2014-09-29 12:46 ` Gregory CLEMENT
@ 2014-09-29 13:57 ` Thomas Petazzoni
2014-09-29 15:23 ` post at twien.net
1 sibling, 1 reply; 8+ messages in thread
From: Thomas Petazzoni @ 2014-09-29 13:57 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On Mon, 29 Sep 2014 13:25:03 +0200, post at twien.net wrote:
> soc {
> ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
Are you really sure about the 0xd0000000 value here? Your earlyprintk
works using CONFIG_DEBUG_MVEBU_UART_ALTERNATE=y according to
your .config, which indicates that your internal registers are mapped at
0xf1000000 and not@0xd0000000 as your Device Tree indicates.
Can you change this line to:
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
And try again?
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* ARMADA 370 - Kernel panic during boot
2014-09-29 13:57 ` Thomas Petazzoni
@ 2014-09-29 15:23 ` post at twien.net
2014-09-29 15:48 ` Gregory CLEMENT
2014-09-29 16:46 ` Thomas Petazzoni
0 siblings, 2 replies; 8+ messages in thread
From: post at twien.net @ 2014-09-29 15:23 UTC (permalink / raw)
To: linux-arm-kernel
Thanks, that made it!
Actually to change the Physical base address of the debug UART was
actually a shot in the dark, because I got nothing out, and I just
decided to give it a try.
To me this is somewhat confusing: I thought the physical address of
those register were 0xd0000000 (according to the hardware specification)
and that the U-boot remapped those to the virtual address 0xf1000000.
Well, since it worked on another board with 0xd0000000 (ref. mail from
Gregory), I assume this is not so simple, and that this may vary
depending on how U-boot remaps the registers, or? I'm using the U-boot
provided by Marvell.
I have to debug further though, because it stopped with the message
bootconsole [...] disabled. I guess the problem is that the switch chip
(88E6532) is not detected (in the U-boot OK though, as egiga0), and this
is my only way out.... (SGMII->PHY)
So thanks for the help. I'll keep on with the debugging.
Tormod
On 2014-09-29 15:57, Thomas Petazzoni wrote:
> Hello,
>
> On Mon, 29 Sep 2014 13:25:03 +0200, post at twien.net wrote:
>
>> soc {
>> ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
>
> Are you really sure about the 0xd0000000 value here? Your earlyprintk
> works using CONFIG_DEBUG_MVEBU_UART_ALTERNATE=y according to
> your .config, which indicates that your internal registers are mapped
> at
> 0xf1000000 and not at 0xd0000000 as your Device Tree indicates.
>
> Can you change this line to:
>
> ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
>
> And try again?
>
> Thanks,
>
> Thomas
^ permalink raw reply [flat|nested] 8+ messages in thread
* ARMADA 370 - Kernel panic during boot
2014-09-29 15:23 ` post at twien.net
@ 2014-09-29 15:48 ` Gregory CLEMENT
2014-09-29 16:46 ` Thomas Petazzoni
1 sibling, 0 replies; 8+ messages in thread
From: Gregory CLEMENT @ 2014-09-29 15:48 UTC (permalink / raw)
To: linux-arm-kernel
On 29/09/2014 17:23, post at twien.net wrote:
> Thanks, that made it!
>
> Actually to change the Physical base address of the debug UART was
> actually a shot in the dark, because I got nothing out, and I just
> decided to give it a try.
> To me this is somewhat confusing: I thought the physical address of
> those register were 0xd0000000 (according to the hardware specification)
> and that the U-boot remapped those to the virtual address 0xf1000000.
> Well, since it worked on another board with 0xd0000000 (ref. mail from
> Gregory),
Actually I modified your config by using CONFIG_DEBUG_MVEBU_UART instead of
CONFIG_DEBUG_MVEBU_UART_ALTERNATE. Indeed my bootloader is an old one which
didn't modify the physical address of the internal register. I didn't mentioned
it because for me to have the traces you showed, this addressed must have been
properly set. I was wrong, the kernel was more tolerant then I thought!
> I assume this is not so simple, and that this may vary
> depending on how U-boot remaps the registers, or? I'm using the U-boot
> provided by Marvell.
Yes the change of this physical address was usually done by U-Boot. This
"feature" is very specific to Marvell. The earlier versions of U-Boot use
0xd0000000, and later they switched to 0xf1000000 because it allows to
have a bigger space address for the RAM.
>
> I have to debug further though, because it stopped with the message
> bootconsole [...] disabled. I guess the problem is that the switch chip
this message means that you switched to the "real" serial driver, and if you
don't see anything after it is that this driver was misconfigured. Either you
use the wrong value for console= or you have another mistake in your dts.
Gregory
> (88E6532) is not detected (in the U-boot OK though, as egiga0), and this
> is my only way out.... (SGMII->PHY)
>
> So thanks for the help. I'll keep on with the debugging.
> Tormod
>
>
>
> On 2014-09-29 15:57, Thomas Petazzoni wrote:
>> Hello,
>>
>> On Mon, 29 Sep 2014 13:25:03 +0200, post at twien.net wrote:
>>
>>> soc {
>>> ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
>>
>> Are you really sure about the 0xd0000000 value here? Your earlyprintk
>> works using CONFIG_DEBUG_MVEBU_UART_ALTERNATE=y according to
>> your .config, which indicates that your internal registers are mapped
>> at
>> 0xf1000000 and not at 0xd0000000 as your Device Tree indicates.
>>
>> Can you change this line to:
>>
>> ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
>>
>> And try again?
>>
>> Thanks,
>>
>> Thomas
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* ARMADA 370 - Kernel panic during boot
2014-09-29 15:23 ` post at twien.net
2014-09-29 15:48 ` Gregory CLEMENT
@ 2014-09-29 16:46 ` Thomas Petazzoni
1 sibling, 0 replies; 8+ messages in thread
From: Thomas Petazzoni @ 2014-09-29 16:46 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On Mon, 29 Sep 2014 17:23:59 +0200, post at twien.net wrote:
> Thanks, that made it!
You're welcome.
> Actually to change the Physical base address of the debug UART was
> actually a shot in the dark, because I got nothing out, and I just
> decided to give it a try.
> To me this is somewhat confusing: I thought the physical address of
> those register were 0xd0000000 (according to the hardware specification)
> and that the U-boot remapped those to the virtual address 0xf1000000.
0xf1000000 is not a virtual address, it's a physical address. The SoC
has the capability of defining where its internal registers are located
in terms of physical address. Out of reset, they are mapped at
0xd0000000, but by using one register, you can remap them to some other
location. The tradition for most Marvell EBU bootloaders is to remap
them at 0xf1000000. This way, there is less space in the 0x0 ->
0xffffffff space used for registers, and therefore more RAM of the
first 4 GB is actually usable.
> Well, since it worked on another board with 0xd0000000 (ref. mail from
> Gregory), I assume this is not so simple, and that this may vary
> depending on how U-boot remaps the registers, or? I'm using the U-boot
> provided by Marvell.
As said earlier, for most Marvell EBU platforms, the registers are
remapped by the bootloader at 0xf1000000. Except that there was a small
issue in early revisions of the Armada 370 and XP that broke some
features if another value than 0xd0000000 was used. For this
reason, some early Armada 370/XP platforms use old Marvell U-Boot
versions that keep registers at 0xd0000000. But more recent Marvell
U-Boot versions properly do the remapping at 0xf1000000 since the
hardware issue was fixed in the production silicon.
Bottom line is: depending on which bootloader version you're using, it
may be 0xd0000000 or 0xf1000000. From your bootloader, you can do:
md 0xd0020080
md 0xf1020080
If one crashes, then it's the other one that will work, and that will
tell you the location of the internal registers.
The trick is that as you can see, the register that configures the
address of the internal registers is itself part of the internal
registers :-)
> I have to debug further though, because it stopped with the message
> bootconsole [...] disabled. I guess the problem is that the switch chip
> (88E6532) is not detected (in the U-boot OK though, as egiga0), and this
> is my only way out.... (SGMII->PHY)
Seems weird. If you have an UART plugged in, a switch chip should
definitely not cause the kernel to hang in its boot process. Do you
have the correct console=ttySx,115200 parameter passed in the kernel
command line? It seems like after switching from the early console to
the real console, you stop having messages, which might indicate a
wrong console= value.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-09-29 16:46 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-29 10:09 ARMADA 370 - Kernel panic during boot post at twien.net
2014-09-29 10:47 ` Gregory CLEMENT
2014-09-29 11:25 ` post at twien.net
2014-09-29 12:46 ` Gregory CLEMENT
2014-09-29 13:57 ` Thomas Petazzoni
2014-09-29 15:23 ` post at twien.net
2014-09-29 15:48 ` Gregory CLEMENT
2014-09-29 16:46 ` Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.