* [Buildroot] cmake is not building anymore
@ 2017-03-13 14:56 Andy Shevchenko
2017-03-13 15:54 ` Andy Shevchenko
0 siblings, 1 reply; 12+ messages in thread
From: Andy Shevchenko @ 2017-03-13 14:56 UTC (permalink / raw)
To: buildroot
Hi!
After update to 2017.02 followed by origin/2017.02.x cmake fails to
compile.
output/build/host-cmake-
3.6.3/Utilities/cmlibarchive/libarchive/archive_hmac.c: In function
?__hmac_sha1_cleanup?:
output/build/host-cmake-
3.6.3/Utilities/cmlibarchive/libarchive/archive_hmac.c:203:24: error:
dereferencing pointer to incomplete type ?archive_hmac_sha1_ctx {aka
struct hmac_ctx_st}?
? memset(ctx, 0, sizeof(*ctx));
????????????????????????^~~~
Is it known issue?
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-13 14:56 [Buildroot] cmake is not building anymore Andy Shevchenko
@ 2017-03-13 15:54 ` Andy Shevchenko
2017-03-15 1:02 ` Carlos Santos
0 siblings, 1 reply; 12+ messages in thread
From: Andy Shevchenko @ 2017-03-13 15:54 UTC (permalink / raw)
To: buildroot
On Mon, 2017-03-13 at 16:56 +0200, Andy Shevchenko wrote:
> Hi!
>
> After update to 2017.02 followed by origin/2017.02.x cmake fails to
> compile.
>
> output/build/host-cmake-
> 3.6.3/Utilities/cmlibarchive/libarchive/archive_hmac.c: In function
> ?__hmac_sha1_cleanup?:
> output/build/host-cmake-
> 3.6.3/Utilities/cmlibarchive/libarchive/archive_hmac.c:203:24: error:
> dereferencing pointer to incomplete type ?archive_hmac_sha1_ctx {aka
> struct hmac_ctx_st}?
> ? memset(ctx, 0, sizeof(*ctx));
> ????????????????????????^~~~
>
> Is it known issue?
Just did a clean build. Issue still stays.
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-13 15:54 ` Andy Shevchenko
@ 2017-03-15 1:02 ` Carlos Santos
2017-03-15 15:10 ` Andy Shevchenko
0 siblings, 1 reply; 12+ messages in thread
From: Carlos Santos @ 2017-03-15 1:02 UTC (permalink / raw)
To: buildroot
> From: "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
> To: "buildroot" <buildroot@busybox.net>
> Sent: Monday, March 13, 2017 12:54:44 PM
> Subject: Re: [Buildroot] cmake is not building anymore
> On Mon, 2017-03-13 at 16:56 +0200, Andy Shevchenko wrote:
>> Hi!
>>
>> After update to 2017.02 followed by origin/2017.02.x cmake fails to
>> compile.
>>
>> output/build/host-cmake-
>> 3.6.3/Utilities/cmlibarchive/libarchive/archive_hmac.c: In function
>> ?__hmac_sha1_cleanup?:
>> output/build/host-cmake-
>> 3.6.3/Utilities/cmlibarchive/libarchive/archive_hmac.c:203:24: error:
>> dereferencing pointer to incomplete type ?archive_hmac_sha1_ctx {aka
>> struct hmac_ctx_st}?
>> ? memset(ctx, 0, sizeof(*ctx));
>> ????????????????????????^~~~
>>
>> Is it known issue?
>
> Just did a clean build. Issue still stays.
I attempted to reproduce your problem but cmake build flawlessly:
$ git checkout -b 2017.02.x origin/2017.02.x
$ git --no-pager log -n 1 --pretty=oneline
3bf15bfc84f646efbdeead006378265fa56855a9 libiio: explicitly disable matlab bindings
[...]
$ make host-cmake
Please provide some context information:
$ make BR2_DEFCONFIG=$PWD/my_defconfig savedefconfig; cat my_defconfig
$ uname -a
$ cat /etc/lsb-release
$ gcc --version
--
Carlos Santos (Casantos) - DATACOM, P&D
?The greatest triumph that modern PR can offer is the transcendent
success of having your words and actions judged by your reputation,
rather than the other way about.? ? Christopher Hitchens
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 1:02 ` Carlos Santos
@ 2017-03-15 15:10 ` Andy Shevchenko
2017-03-15 16:05 ` Carlos Santos
0 siblings, 1 reply; 12+ messages in thread
From: Andy Shevchenko @ 2017-03-15 15:10 UTC (permalink / raw)
To: buildroot
On Tue, 2017-03-14 at 22:02 -0300, Carlos Santos wrote:
> > From: "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
> > To: "buildroot" <buildroot@busybox.net>
> > Sent: Monday, March 13, 2017 12:54:44 PM
> > Subject: Re: [Buildroot] cmake is not building anymore
> > On Mon, 2017-03-13 at 16:56 +0200, Andy Shevchenko wrote:
> > > Hi!
> > >
> > > After update to 2017.02 followed by origin/2017.02.x cmake fails
> > > to
> > > compile.
> > >
> > > output/build/host-cmake-
> > > 3.6.3/Utilities/cmlibarchive/libarchive/archive_hmac.c: In
> > > function
> > > ?__hmac_sha1_cleanup?:
> > > output/build/host-cmake-
> > > 3.6.3/Utilities/cmlibarchive/libarchive/archive_hmac.c:203:24:
> > > error:
> > > dereferencing pointer to incomplete type ?archive_hmac_sha1_ctx
> > > {aka
> > > struct hmac_ctx_st}?
> > > ? memset(ctx, 0, sizeof(*ctx));
> > > ????????????????????????^~~~
> > >
> > > Is it known issue?
> >
> > Just did a clean build. Issue still stays.
>
> I attempted to reproduce your problem but cmake build flawlessly:
>
> ????$ git checkout -b 2017.02.x origin/2017.02.x
> ????$ git --no-pager log -n 1 --pretty=oneline
> ????3bf15bfc84f646efbdeead006378265fa56855a9 libiio: explicitly
> disable matlab bindings
> ????[...]
> ????$ make host-cmake
>
> Please provide some context information:
>
> ????$ make BR2_DEFCONFIG=$PWD/my_defconfig savedefconfig; cat
> my_defconfig
> ????$ uname -a
> ????$ cat /etc/lsb-release?
> ????$ gcc --version
>
Below you may find the information you asked for
What I did (2017.02):
$ git clean -xdf
# I suppose you agree this is more stronger than make clean
$ make defconfig
$ make
--- 8< --- 8< ---
[ 65%] Linking C static library libcmcurl.a
In file included from .../output/build/host-cmake-
3.6.3/Utilities/cmlibarchive/libarchive/archive_write_set_format_zip.c:5
2:0:
.../output/build/host-cmake-
3.6.3/Utilities/cmlibarchive/libarchive/archive_cryptor_private.h:107:17
: error: field ?ctx? has incomplete type
??EVP_CIPHER_CTX ctx;
?????????????????^~~
--- 8< --- 8< ---
100% reproducible
$ uname -a
Linux XXX 4.9.0-1-amd64 #1 SMP Debian 4.9.6-3 (2017-01-28) x86_64
GNU/Linux
$ cat /etc/lsb-release
There is no such file, it's Debian testing system.
$ gcc --version
gcc (Debian 6.2.0-6) 6.2.0 20161010
Here is defconfig I'm using:
# Architecture
BR2_i386=y
BR2_x86_i586=y
# Misc
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
# Root FS
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_CPIO=y
BR2_TARGET_ROOTFS_CPIO_BZIP2=y
# Root FS hooks
BR2_ROOTFS_POST_BUILD_SCRIPT="board/intel/common/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/intel/common/post-image.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS=""
# Common
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# Host tools
BR2_PACKAGE_HOST_ACPICA=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_PACKAGE_HOST_PARTED=y
# Packages
BR2_PACKAGE_EFIBOOTMGR=y
BR2_PACKAGE_KEXEC=y
BR2_PACKAGE_KEXEC_ZLIB=y
BR2_PACKAGE_LRZSZ=y
BR2_PACKAGE_SCREEN=y
BR2_PACKAGE_PCIUTILS=y
BR2_PACKAGE_MTD=y
BR2_PACKAGE_MTD_MKFSUBIFS=y
BR2_PACKAGE_MTD_MTDPART=y
BR2_PACKAGE_MMC_UTILS=y
BR2_PACKAGE_DMIDECODE=y
BR2_PACKAGE_ARGP_STANDALONE=y
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_INTEL_SST_DSP=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_SPEAKER_TEST=y
BR2_PACKAGE_LIBIIO=y
BR2_PACKAGE_LIBIIO_TESTS=y
BR2_PACKAGE_ACPID=y
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_RFKILL=y
BR2_PACKAGE_BLUEZ5_UTILS_EXPERIMENTAL=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_FB_TEST_APP=y
BR2_PACKAGE_FBV=y
BR2_PACKAGE_MSR_TOOLS=y
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 15:10 ` Andy Shevchenko
@ 2017-03-15 16:05 ` Carlos Santos
2017-03-15 17:23 ` Andy Shevchenko
0 siblings, 1 reply; 12+ messages in thread
From: Carlos Santos @ 2017-03-15 16:05 UTC (permalink / raw)
To: buildroot
> From: "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
> To: "Carlos Santos" <casantos@datacom.ind.br>
> Cc: "buildroot" <buildroot@busybox.net>
> Sent: Wednesday, March 15, 2017 12:10:57 PM
> Subject: Re: [Buildroot] cmake is not building anymore
> On Tue, 2017-03-14 at 22:02 -0300, Carlos Santos wrote:
> $ git clean -xdf
> # I suppose you agree this is more stronger than make clean
>
> $ make defconfig
> $ make
>
> --- 8< --- 8< ---
>
> [ 65%] Linking C static library libcmcurl.a
>
> In file included from .../output/build/host-cmake-
> 3.6.3/Utilities/cmlibarchive/libarchive/archive_write_set_format_zip.c:5
> 2:0:
> .../output/build/host-cmake-
> 3.6.3/Utilities/cmlibarchive/libarchive/archive_cryptor_private.h:107:17
> : error: field ?ctx? has incomplete type
>??EVP_CIPHER_CTX ctx;
>?????????????????^~~
> --- 8< --- 8< ---
>
> 100% reproducible
If you use "make BR2_JLEVEL=1" the compilation will stop at the first error and it will be easier to identify the cause. I guess you don't have the openssl-dev package installed on the host machine neither built host-openssl in buildroot, since EVP_CIPHER_CTX is defined in openssl/ossl_typ.h.
--
Carlos Santos (Casantos) - DATACOM, P&D
?The greatest triumph that modern PR can offer is the transcendent
success of having your words and actions judged by your reputation,
rather than the other way about.? ? Christopher Hitchens
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 16:05 ` Carlos Santos
@ 2017-03-15 17:23 ` Andy Shevchenko
2017-03-15 18:55 ` Carlos Santos
0 siblings, 1 reply; 12+ messages in thread
From: Andy Shevchenko @ 2017-03-15 17:23 UTC (permalink / raw)
To: buildroot
On Wed, 2017-03-15 at 13:05 -0300, Carlos Santos wrote:
> > From: "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
> > To: "Carlos Santos" <casantos@datacom.ind.br>
> > Cc: "buildroot" <buildroot@busybox.net>
> > Sent: Wednesday, March 15, 2017 12:10:57 PM
> > Subject: Re: [Buildroot] cmake is not building anymore
> > On Tue, 2017-03-14 at 22:02 -0300, Carlos Santos wrote:
> > $ git clean -xdf
> > # I suppose you agree this is more stronger than make clean
> >
> > $ make defconfig
> > $ make
> >
> > --- 8< --- 8< ---
> >
> > [ 65%] Linking C static library libcmcurl.a
> >
> > In file included from .../output/build/host-cmake-
> > 3.6.3/Utilities/cmlibarchive/libarchive/archive_write_set_format_zip
> > .c:5
> > 2:0:
> > .../output/build/host-cmake-
> > 3.6.3/Utilities/cmlibarchive/libarchive/archive_cryptor_private.h:10
> > 7:17
> > : error: field ?ctx? has incomplete type
> > ??EVP_CIPHER_CTX ctx;
> > ?????????????????^~~
> > --- 8< --- 8< ---
> >
> > 100% reproducible
>
> If you use "make BR2_JLEVEL=1" the compilation will stop at the first
> error and it will be easier to identify the cause.
This is *first* error.
> I guess you don't have the openssl-dev package installed on the host
> machine neither built host-openssl in buildroot, since EVP_CIPHER_CTX
> is defined in openssl/ossl_typ.h.
It is installed.
$ dpkg -l \*ssl-dev
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-
aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name???????????????????Version??????????Architecture?????Description
+++-======================-================-================-
==================================================
...
ii??libcurl4-openssl-dev:a 7.52.1-3?????????amd64????????????development
files and documentation for libcurl (O
...
ii??libssl-dev:amd64???????1.1.0e-1?????????amd64????????????Secure
Sockets Layer toolkit - development files
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 17:23 ` Andy Shevchenko
@ 2017-03-15 18:55 ` Carlos Santos
2017-03-15 19:44 ` Andy Shevchenko
0 siblings, 1 reply; 12+ messages in thread
From: Carlos Santos @ 2017-03-15 18:55 UTC (permalink / raw)
To: buildroot
> From: "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
> To: "Carlos Santos" <casantos@datacom.ind.br>
> Cc: "buildroot" <buildroot@busybox.net>
> Sent: Wednesday, March 15, 2017 2:23:33 PM
> Subject: Re: [Buildroot] cmake is not building anymore
> On Wed, 2017-03-15 at 13:05 -0300, Carlos Santos wrote:
>> > From: "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
>> > To: "Carlos Santos" <casantos@datacom.ind.br>
>> > Cc: "buildroot" <buildroot@busybox.net>
>> > Sent: Wednesday, March 15, 2017 12:10:57 PM
>> > Subject: Re: [Buildroot] cmake is not building anymore
>> > On Tue, 2017-03-14 at 22:02 -0300, Carlos Santos wrote:
>> > $ git clean -xdf
>> > # I suppose you agree this is more stronger than make clean
>> >
>> > $ make defconfig
>> > $ make
>> >
>> > --- 8< --- 8< ---
>> >
>> > [ 65%] Linking C static library libcmcurl.a
>> >
>> > In file included from .../output/build/host-cmake-
>> > 3.6.3/Utilities/cmlibarchive/libarchive/archive_write_set_format_zip
>> > .c:5
>> > 2:0:
>> > .../output/build/host-cmake-
>> > 3.6.3/Utilities/cmlibarchive/libarchive/archive_cryptor_private.h:10
>> > 7:17
>> > : error: field ?ctx? has incomplete type
>> > ??EVP_CIPHER_CTX ctx;
>> > ?????????????????^~~
>> > --- 8< --- 8< ---
>> >
>> > 100% reproducible
>>
>> If you use "make BR2_JLEVEL=1" the compilation will stop at the first
>> error and it will be easier to identify the cause.
>
> This is *first* error.
>
>> I guess you don't have the openssl-dev package installed on the host
>> machine neither built host-openssl in buildroot, since EVP_CIPHER_CTX
>> is defined in openssl/ossl_typ.h.
>
> It is installed.
>
> $ dpkg -l \*ssl-dev
> Desired=Unknown/Install/Remove/Purge/Hold
>| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-
> aWait/Trig-pend
>|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
>||/ Name???????????????????Version??????????Architecture?????Description
> +++-======================-================-================-
> ==================================================
> ...
> ii??libcurl4-openssl-dev:a 7.52.1-3?????????amd64????????????development
> files and documentation for libcurl (O
> ...
> ii??libssl-dev:amd64???????1.1.0e-1?????????amd64????????????Secure
> Sockets Layer toolkit - development files
>
> --
> Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Intel Finland Oy
Ouch! Does it build using host-openssl, instead?
--
Carlos Santos (Casantos) - DATACOM, P&D
?The greatest triumph that modern PR can offer is the transcendent
success of having your words and actions judged by your reputation,
rather than the other way about.? ? Christopher Hitchens
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 18:55 ` Carlos Santos
@ 2017-03-15 19:44 ` Andy Shevchenko
2017-03-15 19:49 ` Baruch Siach
0 siblings, 1 reply; 12+ messages in thread
From: Andy Shevchenko @ 2017-03-15 19:44 UTC (permalink / raw)
To: buildroot
On Wed, 2017-03-15 at 15:55 -0300, Carlos Santos wrote:
> > From: "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
> > To: "Carlos Santos" <casantos@datacom.ind.br>
> > Cc: "buildroot" <buildroot@busybox.net>
> > Sent: Wednesday, March 15, 2017 2:23:33 PM
> > Subject: Re: [Buildroot] cmake is not building anymore
> > On Wed, 2017-03-15 at 13:05 -0300, Carlos Santos wrote:
> > > > $ git clean -xdf
> > > > # I suppose you agree this is more stronger than make clean
> > > >
> > > > $ make defconfig
> > > > $ make
> > > >
> > > > --- 8< --- 8< ---
> > > >
> > > > [ 65%] Linking C static library libcmcurl.a
> > > >
> > > > In file included from .../output/build/host-cmake-
> > > > 3.6.3/Utilities/cmlibarchive/libarchive/archive_write_set_format
> > > > _zip
> > > > .c:5
> > > > 2:0:
> > > > .../output/build/host-cmake-
> > > > 3.6.3/Utilities/cmlibarchive/libarchive/archive_cryptor_private.
> > > > h:10
> > > > 7:17
> > > > : error: field ?ctx? has incomplete type
> > > > ??EVP_CIPHER_CTX ctx;
> > > > ?????????????????^~~
> > > > --- 8< --- 8< ---
> > > >
> > > > 100% reproducible
> > >
> > > If you use "make BR2_JLEVEL=1" the compilation will stop at the
> > > first
> > > error and it will be easier to identify the cause.
> >
> > This is *first* error.
> >
> > > ?I guess you don't have the openssl-dev package installed on the
> > > host
> > > machine neither built host-openssl in buildroot, since
> > > EVP_CIPHER_CTX
> > > is defined in openssl/ossl_typ.h.
> >
> > It is installed.
> >
> > $ dpkg -l \*ssl-dev
> > ii??libssl-dev:amd64???????1.1.0e-1?????????amd64????????????Secure
> > Sockets Layer toolkit - development files
> Ouch! Does it build using host-openssl, instead?
At least I don't see any folder like that in output/.
$ ls -1d output/build/*ssl*
ls: cannot access 'output/build/*ssl*': No such file or directory
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 19:44 ` Andy Shevchenko
@ 2017-03-15 19:49 ` Baruch Siach
2017-03-15 20:04 ` Andy Shevchenko
0 siblings, 1 reply; 12+ messages in thread
From: Baruch Siach @ 2017-03-15 19:49 UTC (permalink / raw)
To: buildroot
Hi Andy,
On Wed, Mar 15, 2017 at 09:44:00PM +0200, Andy Shevchenko wrote:
> On Wed, 2017-03-15 at 15:55 -0300, Carlos Santos wrote:
> > Ouch! Does it build using host-openssl, instead?
>
> At least I don't see any folder like that in output/.
>
> $ ls -1d output/build/*ssl*
> ls: cannot access 'output/build/*ssl*': No such file or directory
What Carlos suggests is to build host-openssl manually
make host-openssl
and then rerun the cmake build
rm -r output/build/host-cmake*
make host-cmake
Does that work?
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 19:49 ` Baruch Siach
@ 2017-03-15 20:04 ` Andy Shevchenko
2017-03-15 20:56 ` Peter Korsgaard
0 siblings, 1 reply; 12+ messages in thread
From: Andy Shevchenko @ 2017-03-15 20:04 UTC (permalink / raw)
To: buildroot
On Wed, 2017-03-15 at 21:49 +0200, Baruch Siach wrote:
> Hi Andy,
>
> On Wed, Mar 15, 2017 at 09:44:00PM +0200, Andy Shevchenko wrote:
> > On Wed, 2017-03-15 at 15:55 -0300, Carlos Santos wrote:
> > > Ouch! Does it build using host-openssl, instead?
> >
> > At least I don't see any folder like that in output/.
> >
> > $ ls -1d output/build/*ssl*
> > ls: cannot access 'output/build/*ssl*': No such file or directory
>
> What Carlos suggests is to build host-openssl manually
>
> ? make host-openssl
>
> and then rerun the cmake build
>
> ? rm -r output/build/host-cmake*
> ? make host-cmake
>
> Does that work?
Yes, it does with `rm -rf` (I tried before with make host-cmake-clean-
for-reconfigutre, that didn't help)
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 20:04 ` Andy Shevchenko
@ 2017-03-15 20:56 ` Peter Korsgaard
2017-03-20 12:47 ` Andy Shevchenko
0 siblings, 1 reply; 12+ messages in thread
From: Peter Korsgaard @ 2017-03-15 20:56 UTC (permalink / raw)
To: buildroot
>>>>> "Andy" == Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:
Hi,
>> ? rm -r output/build/host-cmake*
>> ? make host-cmake
>>
>> Does that work?
> Yes, it does with `rm -rf` (I tried before with make host-cmake-clean-
> for-reconfigutre, that didn't help)
Ok, that is good at least. So I guess the solution is to convince cmake
to build its embedded libarchive copy without openssl support, or to
move to system libraries and add host-libarchive to the dependencies.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] cmake is not building anymore
2017-03-15 20:56 ` Peter Korsgaard
@ 2017-03-20 12:47 ` Andy Shevchenko
0 siblings, 0 replies; 12+ messages in thread
From: Andy Shevchenko @ 2017-03-20 12:47 UTC (permalink / raw)
To: buildroot
On Wed, 2017-03-15 at 21:56 +0100, Peter Korsgaard wrote:
> > > > > > "Andy" == Andy Shevchenko <andriy.shevchenko@linux.intel.com
> > > > > > > writes:
>
> Hi,
>
> ?>> ? rm -r output/build/host-cmake*
> ?>> ? make host-cmake
> ?>>?
> ?>> Does that work?
>
> ?> Yes, it does with `rm -rf` (I tried before with make host-cmake-
> clean-
> ?> for-reconfigutre, that didn't help)
>
> Ok, that is good at least. So I guess the solution is to convince
> cmake
> to build its embedded libarchive copy without openssl support, or to
> move to system libraries and add host-libarchive to the dependencies.
So, is anyone going to fix it?
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-03-20 12:47 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-13 14:56 [Buildroot] cmake is not building anymore Andy Shevchenko
2017-03-13 15:54 ` Andy Shevchenko
2017-03-15 1:02 ` Carlos Santos
2017-03-15 15:10 ` Andy Shevchenko
2017-03-15 16:05 ` Carlos Santos
2017-03-15 17:23 ` Andy Shevchenko
2017-03-15 18:55 ` Carlos Santos
2017-03-15 19:44 ` Andy Shevchenko
2017-03-15 19:49 ` Baruch Siach
2017-03-15 20:04 ` Andy Shevchenko
2017-03-15 20:56 ` Peter Korsgaard
2017-03-20 12:47 ` Andy Shevchenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.