* [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.
@ 2016-09-23 22:24 ` chris.roth-/KKvz3x1pcI
0 siblings, 0 replies; 8+ messages in thread
From: chris.roth @ 2016-09-23 22:24 UTC (permalink / raw)
To: linux-usb, netdev, linux-kernel; +Cc: Chris Roth, Allan Chou
From: Chris Roth <chris.roth@usask.ca>
From: Allan Chou <allan@asix.com.tw>
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
Bridge Controller (Vendor=04b4 ProdID=3610).
Patch verified on x64 linux kernel 4.7.4 system with the
Kensington SD4600P USB-C Universal Dock with Power, which uses the
Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
A similar patch was signed-off and tested-by Allan Chou
<allan@asix.com.tw> on 2015-12-01.
Allan verified his similar patch on x86 Linux kernel 4.1.6 system
with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
Tested-by: Allan Chou <allan@asix.com.tw>
Tested-by: Chris Roth <chris.roth@usask.ca>
Signed-off-by: Allan Chou <allan@asix.com.tw>
Signed-off-by: Chris Roth <chris.roth@usask.ca>
---
drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c1..8a6675d 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
.tx_fixup = ax88179_tx_fixup,
};
+static const struct driver_info cypress_GX3_info = {
+ .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
static const struct driver_info dlink_dub1312_info = {
.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
.bind = ax88179_bind,
@@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
USB_DEVICE(0x0b95, 0x178a),
.driver_info = (unsigned long)&ax88178a_info,
}, {
+ /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
+ USB_DEVICE(0x04b4, 0x3610),
+ .driver_info = (unsigned long)&cypress_GX3_info,
+}, {
/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
USB_DEVICE(0x2001, 0x4a00),
.driver_info = (unsigned long)&dlink_dub1312_info,
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.
@ 2016-09-23 22:24 ` chris.roth-/KKvz3x1pcI
0 siblings, 0 replies; 8+ messages in thread
From: chris.roth-/KKvz3x1pcI @ 2016-09-23 22:24 UTC (permalink / raw)
To: linux-usb-u79uwXL29TY76Z2rM5mHXA, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Chris Roth, Allan Chou
From: Chris Roth <chris.roth-/KKvz3x1pcI@public.gmane.org>
From: Allan Chou <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
Bridge Controller (Vendor=04b4 ProdID=3610).
Patch verified on x64 linux kernel 4.7.4 system with the
Kensington SD4600P USB-C Universal Dock with Power, which uses the
Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
A similar patch was signed-off and tested-by Allan Chou
<allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org> on 2015-12-01.
Allan verified his similar patch on x86 Linux kernel 4.1.6 system
with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
Tested-by: Allan Chou <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>
Tested-by: Chris Roth <chris.roth-/KKvz3x1pcI@public.gmane.org>
Signed-off-by: Allan Chou <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>
Signed-off-by: Chris Roth <chris.roth-/KKvz3x1pcI@public.gmane.org>
---
drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c1..8a6675d 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
.tx_fixup = ax88179_tx_fixup,
};
+static const struct driver_info cypress_GX3_info = {
+ .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
static const struct driver_info dlink_dub1312_info = {
.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
.bind = ax88179_bind,
@@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
USB_DEVICE(0x0b95, 0x178a),
.driver_info = (unsigned long)&ax88178a_info,
}, {
+ /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
+ USB_DEVICE(0x04b4, 0x3610),
+ .driver_info = (unsigned long)&cypress_GX3_info,
+}, {
/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
USB_DEVICE(0x2001, 0x4a00),
.driver_info = (unsigned long)&dlink_dub1312_info,
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.
[not found] ` <CAPZMiRa7mTJK5SOWm2eLbhuNZ5EZ7CCPzG40dPzzxsstP78VTQ@mail.gmail.com>
@ 2016-09-24 16:59 ` Chris Roth
2016-09-24 23:57 ` David Miller
0 siblings, 1 reply; 8+ messages in thread
From: Chris Roth @ 2016-09-24 16:59 UTC (permalink / raw)
To: linux-usb, netdev, linux-kernel
Due to my lack of familiarity with the how git send-email works, I've
unintentionally had my name listed as the first 'from' whereas I
intended Allan Chou to be listed as the first 'from' in the patch. If
anyone can correct this on my behalf, I would appreciate it.
Regards,
Chris
On Sat, Sep 24, 2016 at 10:57 AM, Chris Roth <chris.roth@usask.ca> wrote:
>
> Due to my lack of familiarity with the how git send-email works, I've unintentionally had my name listed as the first 'from' whereas I intended Allan Chou to be listed as the first 'from' in the patch. If anyone can correct this on my behalf, I would appreciate it.
>
> Regards,
> Chris
>
> On Fri, Sep 23, 2016 at 4:24 PM, <chris.roth@usask.ca> wrote:
>>
>> From: Chris Roth <chris.roth@usask.ca>
>>
>> From: Allan Chou <allan@asix.com.tw>
>>
>> Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
>> Bridge Controller (Vendor=04b4 ProdID=3610).
>>
>> Patch verified on x64 linux kernel 4.7.4 system with the
>> Kensington SD4600P USB-C Universal Dock with Power, which uses the
>> Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>>
>> A similar patch was signed-off and tested-by Allan Chou
>> <allan@asix.com.tw> on 2015-12-01.
>>
>> Allan verified his similar patch on x86 Linux kernel 4.1.6 system
>> with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>>
>> Tested-by: Allan Chou <allan@asix.com.tw>
>> Tested-by: Chris Roth <chris.roth@usask.ca>
>>
>> Signed-off-by: Allan Chou <allan@asix.com.tw>
>> Signed-off-by: Chris Roth <chris.roth@usask.ca>
>> ---
>> drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>>
>> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
>> index e6338c1..8a6675d 100644
>> --- a/drivers/net/usb/ax88179_178a.c
>> +++ b/drivers/net/usb/ax88179_178a.c
>> @@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
>> .tx_fixup = ax88179_tx_fixup,
>> };
>>
>> +static const struct driver_info cypress_GX3_info = {
>> + .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
>> + .bind = ax88179_bind,
>> + .unbind = ax88179_unbind,
>> + .status = ax88179_status,
>> + .link_reset = ax88179_link_reset,
>> + .reset = ax88179_reset,
>> + .stop = ax88179_stop,
>> + .flags = FLAG_ETHER | FLAG_FRAMING_AX,
>> + .rx_fixup = ax88179_rx_fixup,
>> + .tx_fixup = ax88179_tx_fixup,
>> +};
>> +
>> static const struct driver_info dlink_dub1312_info = {
>> .description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
>> .bind = ax88179_bind,
>> @@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
>> USB_DEVICE(0x0b95, 0x178a),
>> .driver_info = (unsigned long)&ax88178a_info,
>> }, {
>> + /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
>> + USB_DEVICE(0x04b4, 0x3610),
>> + .driver_info = (unsigned long)&cypress_GX3_info,
>> +}, {
>> /* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
>> USB_DEVICE(0x2001, 0x4a00),
>> .driver_info = (unsigned long)&dlink_dub1312_info,
>> --
>> 2.7.4
>>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.
@ 2016-09-24 23:57 ` David Miller
0 siblings, 0 replies; 8+ messages in thread
From: David Miller @ 2016-09-24 23:57 UTC (permalink / raw)
To: chris.roth; +Cc: linux-usb, netdev, linux-kernel
From: Chris Roth <chris.roth@usask.ca>
Date: Sat, 24 Sep 2016 10:59:04 -0600
> Due to my lack of familiarity with the how git send-email works, I've
> unintentionally had my name listed as the first 'from' whereas I
> intended Allan Chou to be listed as the first 'from' in the patch. If
> anyone can correct this on my behalf, I would appreciate it.
Simply just submit a 'v2' of this patch with this issue fixed.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.
@ 2016-09-24 23:57 ` David Miller
0 siblings, 0 replies; 8+ messages in thread
From: David Miller @ 2016-09-24 23:57 UTC (permalink / raw)
To: chris.roth-/KKvz3x1pcI
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
From: Chris Roth <chris.roth-/KKvz3x1pcI@public.gmane.org>
Date: Sat, 24 Sep 2016 10:59:04 -0600
> Due to my lack of familiarity with the how git send-email works, I've
> unintentionally had my name listed as the first 'from' whereas I
> intended Allan Chou to be listed as the first 'from' in the patch. If
> anyone can correct this on my behalf, I would appreciate it.
Simply just submit a 'v2' of this patch with this issue fixed.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.
@ 2016-09-23 19:00 ` Greg KH
0 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2016-09-23 19:00 UTC (permalink / raw)
To: chris.roth; +Cc: linux-usb, netdev, linux-kernel
On Fri, Sep 23, 2016 at 12:24:50PM -0600, chris.roth@usask.ca wrote:
> From: Chris Roth <chris.roth@usask.ca>
>
> Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
> Bridge Controller (Vendor=04b4 ProdID=3610).
>
> Patch verified on x64 linux kernel 4.7.4 system with the
> Kensington SD4600P USB-C Universal Dock with Power, which uses the
> Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>
> A similar patch was signed-off and tested-by Allan Chou
> <allan@asix.com.tw> on 2015-12-01.
Then you should put a "From: " line at the top of this patch that looks
like:
From: Allan Chou <allan@asix.com.tw>
at the top of the patch and then a blank line, and put the signed-off-by
back in the patch as well, with yours below it. The file
Documentation/SubmittingPatches should show you how to do this.
Can you try again?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.
@ 2016-09-23 19:00 ` Greg KH
0 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2016-09-23 19:00 UTC (permalink / raw)
To: chris.roth-/KKvz3x1pcI
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On Fri, Sep 23, 2016 at 12:24:50PM -0600, chris.roth-/KKvz3x1pcI@public.gmane.org wrote:
> From: Chris Roth <chris.roth-/KKvz3x1pcI@public.gmane.org>
>
> Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
> Bridge Controller (Vendor=04b4 ProdID=3610).
>
> Patch verified on x64 linux kernel 4.7.4 system with the
> Kensington SD4600P USB-C Universal Dock with Power, which uses the
> Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>
> A similar patch was signed-off and tested-by Allan Chou
> <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org> on 2015-12-01.
Then you should put a "From: " line at the top of this patch that looks
like:
From: Allan Chou <allan-knRN6Y/kmf1NUHwG+Fw1Kw@public.gmane.org>
at the top of the patch and then a blank line, and put the signed-off-by
back in the patch as well, with yours below it. The file
Documentation/SubmittingPatches should show you how to do this.
Can you try again?
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.
@ 2016-09-23 18:24 chris.roth
2016-09-23 19:00 ` Greg KH
0 siblings, 1 reply; 8+ messages in thread
From: chris.roth @ 2016-09-23 18:24 UTC (permalink / raw)
To: linux-usb, netdev, linux-kernel; +Cc: Chris Roth
From: Chris Roth <chris.roth@usask.ca>
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
Bridge Controller (Vendor=04b4 ProdID=3610).
Patch verified on x64 linux kernel 4.7.4 system with the
Kensington SD4600P USB-C Universal Dock with Power, which uses the
Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
A similar patch was signed-off and tested-by Allan Chou
<allan@asix.com.tw> on 2015-12-01.
Allan verified his similar patch on x86 Linux kernel 4.1.6 system
with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
Signed-off-by: Chris Roth <chris.roth@usask.ca>
---
drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c1..8a6675d 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
.tx_fixup = ax88179_tx_fixup,
};
+static const struct driver_info cypress_GX3_info = {
+ .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
static const struct driver_info dlink_dub1312_info = {
.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
.bind = ax88179_bind,
@@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
USB_DEVICE(0x0b95, 0x178a),
.driver_info = (unsigned long)&ax88178a_info,
}, {
+ /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
+ USB_DEVICE(0x04b4, 0x3610),
+ .driver_info = (unsigned long)&cypress_GX3_info,
+}, {
/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
USB_DEVICE(0x2001, 0x4a00),
.driver_info = (unsigned long)&dlink_dub1312_info,
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-09-24 23:57 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-23 22:24 [PATCH] Net Driver: Add Cypress GX3 VID=04b4 PID=3610 chris.roth
2016-09-23 22:24 ` chris.roth-/KKvz3x1pcI
[not found] ` <CAPZMiRa7mTJK5SOWm2eLbhuNZ5EZ7CCPzG40dPzzxsstP78VTQ@mail.gmail.com>
2016-09-24 16:59 ` Chris Roth
2016-09-24 23:57 ` David Miller
2016-09-24 23:57 ` David Miller
-- strict thread matches above, loose matches on Subject: below --
2016-09-23 18:24 chris.roth
2016-09-23 19:00 ` Greg KH
2016-09-23 19:00 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.