* [PATCH] tty: serial: msm_serial: document DT alias
@ 2014-11-14 22:07 ` Frank Rowand
0 siblings, 0 replies; 6+ messages in thread
From: Frank Rowand @ 2014-11-14 22:07 UTC (permalink / raw)
To: Greg Kroah-Hartman, Stephen Boyd
Cc: Linux Kernel list, linux-arm-msm, linux-arm-kernel, linux-serial,
Olof Johansson, Arnd Bergmann, Tyler Baker, Kevin Hilman,
devicetree
From: Frank Rowand <frank.rowand@sonymobile.com>
Update devicetree binding for msm_serial to reflect msm_serial_probe()
getting line id (port number) from the serialN alias.
Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
---
Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt | 15 +++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
Index: linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -27,27 +27,52 @@ Optional properties:
- dmas: Should contain dma specifiers for transmit and receive channels
- dma-names: Should contain "tx" for transmit and "rx" for receive channels
+Note: Aliases may be defined to ensure the correct ordering of the UARTs.
+The alias serialN will result in the UART being assigned port N. If any
+serialN alias exists, then an alias must exist for each enabled UART. The
+serialN aliases should be in a .dts file instead of in a .dtsi file.
+
Examples:
-A uartdm v1.4 device with dma capabilities.
+- A uartdm v1.4 device with dma capabilities.
+
+ serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <0 108 0x0>;
+ clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+ clock-names = "core", "iface";
+ dmas = <&dma0 0>, <&dma0 1>;
+ dma-names = "tx", "rx";
+ };
+
+- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
+
+ serial@19c40000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
+ clock-names = "core", "iface";
+ };
+
+- serialN alias.
+
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartc;
+ serial2 = &uartb;
+ };
+
+ uarta: serial@12490000 {
+ status = "ok";
+ };
+
+ uartb: serial@16340000 {
+ status = "ok";
+ };
-serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
- clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
- clock-names = "core", "iface";
- dmas = <&dma0 0>, <&dma0 1>;
- dma-names = "tx", "rx";
-};
-
-A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
-
-serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
- clock-names = "core", "iface";
-};
+ uartc: serial@1a240000 {
+ status = "ok";
+ };
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] tty: serial: msm_serial: document DT alias
@ 2014-11-14 22:07 ` Frank Rowand
0 siblings, 0 replies; 6+ messages in thread
From: Frank Rowand @ 2014-11-14 22:07 UTC (permalink / raw)
To: Greg Kroah-Hartman, Stephen Boyd
Cc: Linux Kernel list, linux-arm-msm, linux-arm-kernel, linux-serial,
Olof Johansson, Arnd Bergmann, Tyler Baker, Kevin Hilman,
devicetree
From: Frank Rowand <frank.rowand@sonymobile.com>
Update devicetree binding for msm_serial to reflect msm_serial_probe()
getting line id (port number) from the serialN alias.
Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
---
Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt | 15 +++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
Index: linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -27,27 +27,52 @@ Optional properties:
- dmas: Should contain dma specifiers for transmit and receive channels
- dma-names: Should contain "tx" for transmit and "rx" for receive channels
+Note: Aliases may be defined to ensure the correct ordering of the UARTs.
+The alias serialN will result in the UART being assigned port N. If any
+serialN alias exists, then an alias must exist for each enabled UART. The
+serialN aliases should be in a .dts file instead of in a .dtsi file.
+
Examples:
-A uartdm v1.4 device with dma capabilities.
+- A uartdm v1.4 device with dma capabilities.
+
+ serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <0 108 0x0>;
+ clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+ clock-names = "core", "iface";
+ dmas = <&dma0 0>, <&dma0 1>;
+ dma-names = "tx", "rx";
+ };
+
+- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
+
+ serial@19c40000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
+ clock-names = "core", "iface";
+ };
+
+- serialN alias.
+
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartc;
+ serial2 = &uartb;
+ };
+
+ uarta: serial@12490000 {
+ status = "ok";
+ };
+
+ uartb: serial@16340000 {
+ status = "ok";
+ };
-serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
- clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
- clock-names = "core", "iface";
- dmas = <&dma0 0>, <&dma0 1>;
- dma-names = "tx", "rx";
-};
-
-A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
-
-serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
- clock-names = "core", "iface";
-};
+ uartc: serial@1a240000 {
+ status = "ok";
+ };
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] tty: serial: msm_serial: document DT alias
@ 2014-11-14 22:07 ` Frank Rowand
0 siblings, 0 replies; 6+ messages in thread
From: Frank Rowand @ 2014-11-14 22:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Frank Rowand <frank.rowand@sonymobile.com>
Update devicetree binding for msm_serial to reflect msm_serial_probe()
getting line id (port number) from the serialN alias.
Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
---
Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt | 15 +++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
Index: linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -27,27 +27,52 @@ Optional properties:
- dmas: Should contain dma specifiers for transmit and receive channels
- dma-names: Should contain "tx" for transmit and "rx" for receive channels
+Note: Aliases may be defined to ensure the correct ordering of the UARTs.
+The alias serialN will result in the UART being assigned port N. If any
+serialN alias exists, then an alias must exist for each enabled UART. The
+serialN aliases should be in a .dts file instead of in a .dtsi file.
+
Examples:
-A uartdm v1.4 device with dma capabilities.
+- A uartdm v1.4 device with dma capabilities.
+
+ serial at f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <0 108 0x0>;
+ clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+ clock-names = "core", "iface";
+ dmas = <&dma0 0>, <&dma0 1>;
+ dma-names = "tx", "rx";
+ };
+
+- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
+
+ serial at 19c40000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
+ clock-names = "core", "iface";
+ };
+
+- serialN alias.
+
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartc;
+ serial2 = &uartb;
+ };
+
+ uarta: serial at 12490000 {
+ status = "ok";
+ };
+
+ uartb: serial at 16340000 {
+ status = "ok";
+ };
-serial at f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
- clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
- clock-names = "core", "iface";
- dmas = <&dma0 0>, <&dma0 1>;
- dma-names = "tx", "rx";
-};
-
-A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
-
-serial at 19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
- clock-names = "core", "iface";
-};
+ uartc: serial at 1a240000 {
+ status = "ok";
+ };
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] tty: serial: msm_serial: document DT alias
2014-11-14 22:07 ` Frank Rowand
(?)
@ 2014-11-24 19:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 6+ messages in thread
From: Greg Kroah-Hartman @ 2014-11-24 19:36 UTC (permalink / raw)
To: Frank Rowand
Cc: Stephen Boyd, Linux Kernel list, linux-arm-msm, linux-arm-kernel,
linux-serial, Olof Johansson, Arnd Bergmann, Tyler Baker,
Kevin Hilman, devicetree
On Fri, Nov 14, 2014 at 02:07:15PM -0800, Frank Rowand wrote:
> From: Frank Rowand <frank.rowand@sonymobile.com>
>
> Update devicetree binding for msm_serial to reflect msm_serial_probe()
> getting line id (port number) from the serialN alias.
>
> Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
> ---
> Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt | 15 +++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> Index: linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> ===================================================================
> --- linux.orig/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> +++ linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> @@ -27,27 +27,52 @@ Optional properties:
> - dmas: Should contain dma specifiers for transmit and receive channels
> - dma-names: Should contain "tx" for transmit and "rx" for receive channels
>
> +Note: Aliases may be defined to ensure the correct ordering of the UARTs.
> +The alias serialN will result in the UART being assigned port N. If any
> +serialN alias exists, then an alias must exist for each enabled UART. The
> +serialN aliases should be in a .dts file instead of in a .dtsi file.
> +
> Examples:
>
> -A uartdm v1.4 device with dma capabilities.
> +- A uartdm v1.4 device with dma capabilities.
> +
> + serial@f991e000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0xf991e000 0x1000>;
> + interrupts = <0 108 0x0>;
> + clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
> + clock-names = "core", "iface";
> + dmas = <&dma0 0>, <&dma0 1>;
> + dma-names = "tx", "rx";
> + };
> +
> +- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
> +
> + serial@19c40000 {
> + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> + reg = <0x19c40000 0x1000>,
> + <0x19c00000 0x1000>;
> + interrupts = <0 195 0x0>;
> + clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
> + clock-names = "core", "iface";
> + };
> +
> +- serialN alias.
> +
> + aliases {
> + serial0 = &uarta;
> + serial1 = &uartc;
> + serial2 = &uartb;
> + };
> +
> + uarta: serial@12490000 {
> + status = "ok";
> + };
> +
> + uartb: serial@16340000 {
> + status = "ok";
> + };
>
> -serial@f991e000 {
> - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> - reg = <0xf991e000 0x1000>;
> - interrupts = <0 108 0x0>;
> - clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
> - clock-names = "core", "iface";
> - dmas = <&dma0 0>, <&dma0 1>;
> - dma-names = "tx", "rx";
> -};
> -
> -A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
> -
> -serial@19c40000 {
> - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> - reg = <0x19c40000 0x1000>,
> - <0x19c00000 0x1000>;
> - interrupts = <0 195 0x0>;
> - clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
> - clock-names = "core", "iface";
> -};
> + uartc: serial@1a240000 {
> + status = "ok";
> + };
Git complained about a whitespace issue in this patch, which I fixed up
by hand. Please be more careful...
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] tty: serial: msm_serial: document DT alias
@ 2014-11-24 19:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 6+ messages in thread
From: Greg Kroah-Hartman @ 2014-11-24 19:36 UTC (permalink / raw)
To: Frank Rowand
Cc: Stephen Boyd, Linux Kernel list, linux-arm-msm, linux-arm-kernel,
linux-serial, Olof Johansson, Arnd Bergmann, Tyler Baker,
Kevin Hilman, devicetree
On Fri, Nov 14, 2014 at 02:07:15PM -0800, Frank Rowand wrote:
> From: Frank Rowand <frank.rowand@sonymobile.com>
>
> Update devicetree binding for msm_serial to reflect msm_serial_probe()
> getting line id (port number) from the serialN alias.
>
> Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
> ---
> Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt | 15 +++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> Index: linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> ===================================================================
> --- linux.orig/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> +++ linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> @@ -27,27 +27,52 @@ Optional properties:
> - dmas: Should contain dma specifiers for transmit and receive channels
> - dma-names: Should contain "tx" for transmit and "rx" for receive channels
>
> +Note: Aliases may be defined to ensure the correct ordering of the UARTs.
> +The alias serialN will result in the UART being assigned port N. If any
> +serialN alias exists, then an alias must exist for each enabled UART. The
> +serialN aliases should be in a .dts file instead of in a .dtsi file.
> +
> Examples:
>
> -A uartdm v1.4 device with dma capabilities.
> +- A uartdm v1.4 device with dma capabilities.
> +
> + serial@f991e000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0xf991e000 0x1000>;
> + interrupts = <0 108 0x0>;
> + clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
> + clock-names = "core", "iface";
> + dmas = <&dma0 0>, <&dma0 1>;
> + dma-names = "tx", "rx";
> + };
> +
> +- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
> +
> + serial@19c40000 {
> + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> + reg = <0x19c40000 0x1000>,
> + <0x19c00000 0x1000>;
> + interrupts = <0 195 0x0>;
> + clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
> + clock-names = "core", "iface";
> + };
> +
> +- serialN alias.
> +
> + aliases {
> + serial0 = &uarta;
> + serial1 = &uartc;
> + serial2 = &uartb;
> + };
> +
> + uarta: serial@12490000 {
> + status = "ok";
> + };
> +
> + uartb: serial@16340000 {
> + status = "ok";
> + };
>
> -serial@f991e000 {
> - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> - reg = <0xf991e000 0x1000>;
> - interrupts = <0 108 0x0>;
> - clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
> - clock-names = "core", "iface";
> - dmas = <&dma0 0>, <&dma0 1>;
> - dma-names = "tx", "rx";
> -};
> -
> -A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
> -
> -serial@19c40000 {
> - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> - reg = <0x19c40000 0x1000>,
> - <0x19c00000 0x1000>;
> - interrupts = <0 195 0x0>;
> - clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
> - clock-names = "core", "iface";
> -};
> + uartc: serial@1a240000 {
> + status = "ok";
> + };
Git complained about a whitespace issue in this patch, which I fixed up
by hand. Please be more careful...
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] tty: serial: msm_serial: document DT alias
@ 2014-11-24 19:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 6+ messages in thread
From: Greg Kroah-Hartman @ 2014-11-24 19:36 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Nov 14, 2014 at 02:07:15PM -0800, Frank Rowand wrote:
> From: Frank Rowand <frank.rowand@sonymobile.com>
>
> Update devicetree binding for msm_serial to reflect msm_serial_probe()
> getting line id (port number) from the serialN alias.
>
> Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com>
> ---
> Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt | 15 +++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> Index: linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> ===================================================================
> --- linux.orig/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> +++ linux/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
> @@ -27,27 +27,52 @@ Optional properties:
> - dmas: Should contain dma specifiers for transmit and receive channels
> - dma-names: Should contain "tx" for transmit and "rx" for receive channels
>
> +Note: Aliases may be defined to ensure the correct ordering of the UARTs.
> +The alias serialN will result in the UART being assigned port N. If any
> +serialN alias exists, then an alias must exist for each enabled UART. The
> +serialN aliases should be in a .dts file instead of in a .dtsi file.
> +
> Examples:
>
> -A uartdm v1.4 device with dma capabilities.
> +- A uartdm v1.4 device with dma capabilities.
> +
> + serial at f991e000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0xf991e000 0x1000>;
> + interrupts = <0 108 0x0>;
> + clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
> + clock-names = "core", "iface";
> + dmas = <&dma0 0>, <&dma0 1>;
> + dma-names = "tx", "rx";
> + };
> +
> +- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
> +
> + serial at 19c40000 {
> + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> + reg = <0x19c40000 0x1000>,
> + <0x19c00000 0x1000>;
> + interrupts = <0 195 0x0>;
> + clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
> + clock-names = "core", "iface";
> + };
> +
> +- serialN alias.
> +
> + aliases {
> + serial0 = &uarta;
> + serial1 = &uartc;
> + serial2 = &uartb;
> + };
> +
> + uarta: serial at 12490000 {
> + status = "ok";
> + };
> +
> + uartb: serial at 16340000 {
> + status = "ok";
> + };
>
> -serial at f991e000 {
> - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> - reg = <0xf991e000 0x1000>;
> - interrupts = <0 108 0x0>;
> - clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
> - clock-names = "core", "iface";
> - dmas = <&dma0 0>, <&dma0 1>;
> - dma-names = "tx", "rx";
> -};
> -
> -A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
> -
> -serial at 19c40000 {
> - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> - reg = <0x19c40000 0x1000>,
> - <0x19c00000 0x1000>;
> - interrupts = <0 195 0x0>;
> - clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
> - clock-names = "core", "iface";
> -};
> + uartc: serial at 1a240000 {
> + status = "ok";
> + };
Git complained about a whitespace issue in this patch, which I fixed up
by hand. Please be more careful...
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-11-24 19:36 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-11-14 22:07 [PATCH] tty: serial: msm_serial: document DT alias Frank Rowand
2014-11-14 22:07 ` Frank Rowand
2014-11-14 22:07 ` Frank Rowand
2014-11-24 19:36 ` Greg Kroah-Hartman
2014-11-24 19:36 ` Greg Kroah-Hartman
2014-11-24 19:36 ` Greg Kroah-Hartman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.