All of lore.kernel.org
 help / color / mirror / Atom feed
From: Scott Branden <sbranden@broadcom.com>
To: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>, Corneliu Doban <cdoban@broadcom.com>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] mtd: add reboot notifier to mtdcore and register nand_shutdown with notifier
Date: Thu, 4 Dec 2014 16:13:01 -0800	[thread overview]
Message-ID: <5480F88D.4090707@broadcom.com> (raw)
In-Reply-To: <1417732658-4563-1-git-send-email-sbranden@broadcom.com>

Apologies:  patch fails checkpatch due to spaces instead of tabs during 
cut and paste.

But, please comment on this patch before I create a new version.

On 14-12-04 02:37 PM, Scott Branden wrote:
> add (optional) reboot notifier field to struct mtd_info, and use it to
> register a system reboot notifier on behalf of the lower layers.
>
> Add nand_shutdown to wait for current nand operations to finish and prevent
> further operations by changing the nand flash state to FL_SHUTDOWN.
> Register the nand_shutdown with the reboot notifier in nand_base.c
>
> This is addressing a problem observed during reboot tests using UBIFS
> root file system: NAND erase operations that are in progress during
> system reboot/shutdown are causing partial erased blocks. Although UBI should
> be able to detect and recover from this error, this change will avoid
> the creation of partial erased blocks on reboot in the middle of a NAND erase
> operation.
>
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
> Signed-off-by: Corneliu Doban <cdoban@broadcom.com>
> Signed-off-by: Scott Branden <sbranden@broadcom.com>
> ---
>   drivers/mtd/mtdcore.c        | 20 ++++++++++++++++++++
>   drivers/mtd/nand/nand_base.c | 11 +++++++++++
>   include/linux/mtd/mtd.h      |  1 +
>   3 files changed, 32 insertions(+)
>
> diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
> index 4c61187..b80d44f 100644
> --- a/drivers/mtd/mtdcore.c
> +++ b/drivers/mtd/mtdcore.c
> @@ -37,6 +37,7 @@
>   #include <linux/backing-dev.h>
>   #include <linux/gfp.h>
>   #include <linux/slab.h>
> +#include <linux/reboot.h>
>
>   #include <linux/mtd/mtd.h>
>   #include <linux/mtd/partitions.h>
> @@ -365,6 +366,17 @@ static struct device_type mtd_devtype = {
>   	.release	= mtd_release,
>   };
>
> +static int mtd_reboot_notifier(struct notifier_block *n, unsigned long state,
> +			       void *cmd)
> +{
> +       struct mtd_info *mtd;
> +
> +       mtd = container_of(n, struct mtd_info, reboot_notifier);
> +       mtd->_reboot(mtd);
> +
> +       return NOTIFY_DONE;
> +}
> +
>   /**
>    *	add_mtd_device - register an MTD device
>    *	@mtd: pointer to new MTD device info structure
> @@ -565,6 +577,11 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
>   			err = -ENODEV;
>   	}
>
> +	if (mtd->_reboot) {
> +		mtd->reboot_notifier.notifier_call = mtd_reboot_notifier;
> +		register_reboot_notifier(&mtd->reboot_notifier);
> +	}
> +
>   	return err;
>   }
>   EXPORT_SYMBOL_GPL(mtd_device_parse_register);
> @@ -579,6 +596,9 @@ int mtd_device_unregister(struct mtd_info *master)
>   {
>   	int err;
>
> +	if (master->_reboot)
> +		unregister_reboot_notifier(&master->reboot_notifier);
> +
>   	err = del_mtd_partitions(master);
>   	if (err)
>   		return err;
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 5b5c627..e18165b 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -2944,6 +2944,16 @@ static void nand_resume(struct mtd_info *mtd)
>   			__func__);
>   }
>
> +/**
> + * nand_shutdown - [MTD Interface] Finish the current NAND operation and
> + *                 prevent further operations
> + * @mtd: MTD device structure
> + */
> +static void nand_shutdown(struct mtd_info *mtd)
> +{
> +	nand_get_device(mtd, FL_SHUTDOWN);
> +}
> +
>   /* Set default functions */
>   static void nand_set_defaults(struct nand_chip *chip, int busw)
>   {
> @@ -4146,6 +4156,7 @@ int nand_scan_tail(struct mtd_info *mtd)
>   	mtd->_unlock = NULL;
>   	mtd->_suspend = nand_suspend;
>   	mtd->_resume = nand_resume;
> +	mtd->_reboot = nand_shutdown;
>   	mtd->_block_isreserved = nand_block_isreserved;
>   	mtd->_block_isbad = nand_block_isbad;
>   	mtd->_block_markbad = nand_block_markbad;
> diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
> index 031ff3a..c06f537 100644
> --- a/include/linux/mtd/mtd.h
> +++ b/include/linux/mtd/mtd.h
> @@ -227,6 +227,7 @@ struct mtd_info {
>   	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
>   	int (*_suspend) (struct mtd_info *mtd);
>   	void (*_resume) (struct mtd_info *mtd);
> +	void (*_reboot) (struct mtd_info *mtd);
>   	/*
>   	 * If the driver is something smart, like UBI, it may need to maintain
>   	 * its own reference counting. The below functions are only for driver.
>


WARNING: multiple messages have this Message-ID (diff)
From: Scott Branden <sbranden@broadcom.com>
To: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>
Cc: Corneliu Doban <cdoban@broadcom.com>, Ray Jui <rjui@broadcom.com>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mtd: add reboot notifier to mtdcore and register nand_shutdown with notifier
Date: Thu, 4 Dec 2014 16:13:01 -0800	[thread overview]
Message-ID: <5480F88D.4090707@broadcom.com> (raw)
In-Reply-To: <1417732658-4563-1-git-send-email-sbranden@broadcom.com>

Apologies:  patch fails checkpatch due to spaces instead of tabs during 
cut and paste.

But, please comment on this patch before I create a new version.

On 14-12-04 02:37 PM, Scott Branden wrote:
> add (optional) reboot notifier field to struct mtd_info, and use it to
> register a system reboot notifier on behalf of the lower layers.
>
> Add nand_shutdown to wait for current nand operations to finish and prevent
> further operations by changing the nand flash state to FL_SHUTDOWN.
> Register the nand_shutdown with the reboot notifier in nand_base.c
>
> This is addressing a problem observed during reboot tests using UBIFS
> root file system: NAND erase operations that are in progress during
> system reboot/shutdown are causing partial erased blocks. Although UBI should
> be able to detect and recover from this error, this change will avoid
> the creation of partial erased blocks on reboot in the middle of a NAND erase
> operation.
>
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
> Signed-off-by: Corneliu Doban <cdoban@broadcom.com>
> Signed-off-by: Scott Branden <sbranden@broadcom.com>
> ---
>   drivers/mtd/mtdcore.c        | 20 ++++++++++++++++++++
>   drivers/mtd/nand/nand_base.c | 11 +++++++++++
>   include/linux/mtd/mtd.h      |  1 +
>   3 files changed, 32 insertions(+)
>
> diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
> index 4c61187..b80d44f 100644
> --- a/drivers/mtd/mtdcore.c
> +++ b/drivers/mtd/mtdcore.c
> @@ -37,6 +37,7 @@
>   #include <linux/backing-dev.h>
>   #include <linux/gfp.h>
>   #include <linux/slab.h>
> +#include <linux/reboot.h>
>
>   #include <linux/mtd/mtd.h>
>   #include <linux/mtd/partitions.h>
> @@ -365,6 +366,17 @@ static struct device_type mtd_devtype = {
>   	.release	= mtd_release,
>   };
>
> +static int mtd_reboot_notifier(struct notifier_block *n, unsigned long state,
> +			       void *cmd)
> +{
> +       struct mtd_info *mtd;
> +
> +       mtd = container_of(n, struct mtd_info, reboot_notifier);
> +       mtd->_reboot(mtd);
> +
> +       return NOTIFY_DONE;
> +}
> +
>   /**
>    *	add_mtd_device - register an MTD device
>    *	@mtd: pointer to new MTD device info structure
> @@ -565,6 +577,11 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
>   			err = -ENODEV;
>   	}
>
> +	if (mtd->_reboot) {
> +		mtd->reboot_notifier.notifier_call = mtd_reboot_notifier;
> +		register_reboot_notifier(&mtd->reboot_notifier);
> +	}
> +
>   	return err;
>   }
>   EXPORT_SYMBOL_GPL(mtd_device_parse_register);
> @@ -579,6 +596,9 @@ int mtd_device_unregister(struct mtd_info *master)
>   {
>   	int err;
>
> +	if (master->_reboot)
> +		unregister_reboot_notifier(&master->reboot_notifier);
> +
>   	err = del_mtd_partitions(master);
>   	if (err)
>   		return err;
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 5b5c627..e18165b 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -2944,6 +2944,16 @@ static void nand_resume(struct mtd_info *mtd)
>   			__func__);
>   }
>
> +/**
> + * nand_shutdown - [MTD Interface] Finish the current NAND operation and
> + *                 prevent further operations
> + * @mtd: MTD device structure
> + */
> +static void nand_shutdown(struct mtd_info *mtd)
> +{
> +	nand_get_device(mtd, FL_SHUTDOWN);
> +}
> +
>   /* Set default functions */
>   static void nand_set_defaults(struct nand_chip *chip, int busw)
>   {
> @@ -4146,6 +4156,7 @@ int nand_scan_tail(struct mtd_info *mtd)
>   	mtd->_unlock = NULL;
>   	mtd->_suspend = nand_suspend;
>   	mtd->_resume = nand_resume;
> +	mtd->_reboot = nand_shutdown;
>   	mtd->_block_isreserved = nand_block_isreserved;
>   	mtd->_block_isbad = nand_block_isbad;
>   	mtd->_block_markbad = nand_block_markbad;
> diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
> index 031ff3a..c06f537 100644
> --- a/include/linux/mtd/mtd.h
> +++ b/include/linux/mtd/mtd.h
> @@ -227,6 +227,7 @@ struct mtd_info {
>   	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
>   	int (*_suspend) (struct mtd_info *mtd);
>   	void (*_resume) (struct mtd_info *mtd);
> +	void (*_reboot) (struct mtd_info *mtd);
>   	/*
>   	 * If the driver is something smart, like UBI, it may need to maintain
>   	 * its own reference counting. The below functions are only for driver.
>

  reply	other threads:[~2014-12-05  0:13 UTC|newest]

Thread overview: 659+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Scott Branden <sbranden@broadcom.com>
2014-10-08  5:26 ` [PATCH V3 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-08  5:26   ` Scott Branden
2014-10-08  5:26   ` Scott Branden
2014-10-08  5:27   ` [PATCH 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  7:54     ` Arnd Bergmann
2014-10-08  7:54       ` Arnd Bergmann
2014-10-08  7:54       ` Arnd Bergmann
2014-10-08 12:27       ` Scott Branden
2014-10-08 12:27         ` Scott Branden
2014-10-08 12:27         ` Scott Branden
2014-10-08 13:28         ` Arnd Bergmann
2014-10-08 13:28           ` Arnd Bergmann
2014-10-08 16:27           ` Scott Branden
2014-10-08 16:27             ` Scott Branden
2014-10-08 16:27             ` Scott Branden
2014-10-08 18:12             ` Arnd Bergmann
2014-10-08 18:12               ` Arnd Bergmann
2014-10-08 18:12               ` Arnd Bergmann
2014-10-08 18:45               ` Scott Branden
2014-10-08 18:45                 ` Scott Branden
2014-10-08 18:45                 ` Scott Branden
2014-10-08 22:16               ` Scott Branden
2014-10-08 22:16                 ` Scott Branden
2014-10-08 22:16                 ` Scott Branden
2014-10-09  7:32                 ` Arnd Bergmann
2014-10-09  7:32                   ` Arnd Bergmann
2014-10-09  7:32                   ` Arnd Bergmann
2014-10-08  8:11     ` Russell King - ARM Linux
2014-10-08  8:11       ` Russell King - ARM Linux
2014-10-08 11:17       ` Scott Branden
2014-10-08 11:17         ` Scott Branden
2014-10-08 11:17         ` Scott Branden
2014-10-08 11:41         ` Russell King - ARM Linux
2014-10-08 11:41           ` Russell King - ARM Linux
2014-10-08 13:10     ` Rob Herring
2014-10-08 13:10       ` Rob Herring
2014-10-08 13:10       ` Rob Herring
2014-10-08 16:34       ` Scott Branden
2014-10-08 16:34         ` Scott Branden
2014-10-08 16:34         ` Scott Branden
2014-10-08  5:27   ` [PATCH 2/6] clk: Clock driver " Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  5:27   ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  7:57     ` Arnd Bergmann
2014-10-08  7:57       ` Arnd Bergmann
2014-10-08  7:57       ` Arnd Bergmann
2014-10-08 10:58       ` Scott Branden
2014-10-08 10:58         ` Scott Branden
2014-10-08 10:58         ` Scott Branden
2014-10-08 13:35         ` Arnd Bergmann
2014-10-08 13:35           ` Arnd Bergmann
2014-10-08 13:35           ` Arnd Bergmann
2014-10-08  5:27   ` [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  7:58     ` Arnd Bergmann
2014-10-08  7:58       ` Arnd Bergmann
2014-10-08  7:58       ` Arnd Bergmann
2014-10-08 11:01       ` Scott Branden
2014-10-08 11:01         ` Scott Branden
2014-10-08 11:01         ` Scott Branden
2014-10-08  5:27   ` [PATCH 5/6] ARM: dts: Enable " Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  5:27   ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-08  5:27     ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44   ` Scott Branden
2014-10-09 22:44   ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-10  9:50     ` Arnd Bergmann
2014-10-10  9:50       ` Arnd Bergmann
2014-10-10  9:50       ` Arnd Bergmann
2014-10-10 19:08       ` Scott Branden
2014-10-10 19:08         ` Scott Branden
2014-10-10 19:08         ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 2/7] clk: Clock driver " Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 3/7] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 4/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 5/7] ARM: dts: Enable " Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-10 10:08     ` Arnd Bergmann
2014-10-10 10:08       ` Arnd Bergmann
2014-10-10 19:11       ` Scott Branden
2014-10-10 19:11         ` Scott Branden
2014-10-10 19:11         ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 23:00     ` Joe Perches
2014-10-09 23:00       ` Joe Perches
2014-10-09 23:18       ` Scott Branden
2014-10-09 23:18         ` Scott Branden
2014-10-09 23:18         ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-09 22:44     ` Scott Branden
2014-10-10  9:59     ` Arnd Bergmann
2014-10-10  9:59       ` Arnd Bergmann
2014-10-10  9:59       ` Arnd Bergmann
2014-10-10 19:12       ` Scott Branden
2014-10-10 19:12         ` Scott Branden
2014-10-10 19:12         ` Scott Branden
2014-10-15  2:01 ` [PATCH 0/1] sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-15  2:01   ` Scott Branden
2014-10-15  2:01   ` [PATCH 1/1] mmc: " Scott Branden
2014-10-15  2:01     ` Scott Branden
2014-10-17  2:50     ` Stephen Warren
2014-10-15  2:58 ` [PATCH v5 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-15  2:58   ` Scott Branden
2014-10-15  2:58   ` Scott Branden
2014-10-15  2:58   ` [PATCH v5 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-20 19:55     ` Arnd Bergmann
2014-10-20 19:55       ` Arnd Bergmann
2014-10-20 19:55       ` Arnd Bergmann
2014-10-20 22:59       ` Scott Branden
2014-10-20 22:59         ` Scott Branden
2014-10-20 22:59         ` Scott Branden
2014-10-21  5:48         ` Arnd Bergmann
2014-10-21  5:48           ` Arnd Bergmann
2014-10-21  5:48           ` Arnd Bergmann
2014-10-22  0:11           ` Scott Branden
2014-10-22  0:11             ` Scott Branden
2014-10-22  0:11             ` Scott Branden
2014-10-22  8:22             ` Arnd Bergmann
2014-10-22  8:22               ` Arnd Bergmann
2014-10-22 17:12               ` Scott Branden
2014-10-22 17:12                 ` Scott Branden
2014-10-22 17:12                 ` Scott Branden
2014-10-15  2:58   ` [PATCH v5 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58   ` [PATCH v5 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58   ` [PATCH v5 4/6] ARM: dts: Enable " Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58   ` [PATCH v5 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58   ` [PATCH v5 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15  2:58     ` Scott Branden
2014-10-15 15:54 ` [PATCH 1/1] MAINTAINERS: corrected bcm2835 search Scott Branden
2014-10-15 18:12   ` Stephen Warren
2014-10-15 16:43 ` [PATCH 1/1] mmc: sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-15 16:43   ` Scott Branden
2014-10-18  2:37   ` Stephen Warren
2014-10-18  6:40     ` Scott Branden
2014-10-18  6:40       ` Scott Branden
2014-10-22  2:09 ` [PATCH v6 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22  2:09   ` Scott Branden
2014-10-22  2:09   ` Scott Branden
2014-10-22  2:09   ` [PATCH v6 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09   ` [PATCH v6 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09   ` [PATCH v6 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09   ` [PATCH v6 4/6] ARM: dts: Enable " Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09   ` [PATCH v6 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09   ` [PATCH v6 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22  2:09     ` Scott Branden
2014-10-22 20:57 ` [PATCH v7 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57   ` Scott Branden
2014-10-22 20:57   ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 2/7] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 3/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 4/7] ARM: dts: Enable " Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-28 16:10     ` Arnd Bergmann
2014-10-28 16:10       ` Arnd Bergmann
2014-10-28 19:41       ` Scott Branden
2014-10-28 19:41         ` Scott Branden
2014-10-28 19:41         ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 5/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 6/7] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 7/7] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-22 20:57     ` Scott Branden
2014-10-28 19:53 ` [PATCH v8 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53   ` Scott Branden
2014-10-28 19:53   ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 4/8] ARM: dts: Enable " Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-11-09  0:22     ` Olof Johansson
2014-11-09  0:22       ` Olof Johansson
2014-11-09  0:22       ` Olof Johansson
2014-11-09  6:13       ` Scott Branden
2014-11-09  6:13         ` Scott Branden
2014-11-09  6:13         ` Scott Branden
2014-11-09  6:49         ` Olof Johansson
2014-11-09  6:49           ` Olof Johansson
2014-11-09  6:49           ` Olof Johansson
2014-11-09 17:23           ` Greg Kroah-Hartman
2014-11-09 17:23             ` Greg Kroah-Hartman
2014-11-09 17:23             ` Greg Kroah-Hartman
2014-11-09 20:38             ` Arnd Bergmann
2014-11-09 20:38               ` Arnd Bergmann
2014-11-09 20:38               ` Arnd Bergmann
2014-11-10  5:17               ` Scott Branden
2014-11-10  5:17                 ` Scott Branden
2014-11-10  5:17                 ` Scott Branden
2014-11-10  8:11                 ` Arnd Bergmann
2014-11-10  8:11                   ` Arnd Bergmann
2014-11-10  8:11                   ` Arnd Bergmann
2014-11-10 18:28                   ` Scott Branden
2014-11-10 18:28                     ` Scott Branden
2014-11-10 18:28                     ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 19:53     ` Scott Branden
2014-10-28 20:01     ` Arnd Bergmann
2014-10-28 20:01       ` Arnd Bergmann
2014-10-28 20:06       ` Scott Branden
2014-10-28 20:06         ` Scott Branden
2014-10-28 20:06         ` Scott Branden
2014-10-28 20:13         ` Arnd Bergmann
2014-10-28 20:13           ` Arnd Bergmann
2014-10-28 23:15 ` [PATCH v9 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15   ` Scott Branden
2014-10-28 23:15   ` Scott Branden
2014-10-28 23:15   ` [PATCH v9 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15   ` [PATCH v9 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-11-20  1:05     ` Mike Turquette
2014-11-20  1:05       ` Mike Turquette
2014-11-20  1:05       ` Mike Turquette
2014-10-28 23:15   ` [PATCH v9 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15   ` [PATCH v9 4/8] ARM: dts: Enable " Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-11-10 10:50     ` Paul Bolle
2014-11-10 10:50       ` Paul Bolle
2014-11-10 18:35       ` Olof Johansson
2014-11-10 18:35         ` Olof Johansson
2014-11-10 18:35         ` Olof Johansson
2014-11-10 19:23         ` Paul Bolle
2014-11-10 19:23           ` Paul Bolle
2014-11-10 19:23           ` Paul Bolle
2014-10-28 23:15   ` [PATCH v9 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15   ` [PATCH v9 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15   ` [PATCH v9 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15   ` [PATCH v9 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-28 23:15     ` Scott Branden
2014-10-30  6:36 ` [PATCHv2 0/5] sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-30  6:36   ` Scott Branden
2014-10-30  6:36   ` [PATCHv2 1/5] mmc: sdhci-bcm2835: group read and write functions to improve readability Scott Branden
2014-10-30  6:36     ` Scott Branden
2014-10-30  6:36   ` [PATCHv2 2/5] mmc: sdhci-bcm2835: make shift calculations consistent Scott Branden
2014-10-30  6:36     ` Scott Branden
2014-11-05  4:48     ` Stephen Warren
2014-11-05  5:19       ` Scott Branden
2014-11-05  5:19         ` Scott Branden
2014-10-30  6:36   ` [PATCHv2 3/5] mmc: shdci-bcm2835: add efficient back-to-back write workaround Scott Branden
2014-10-30  6:36     ` Scott Branden
2014-11-05  4:57     ` Stephen Warren
2014-11-05  6:55       ` Scott Branden
2014-11-05  6:55         ` Scott Branden
2014-11-06  4:48         ` Stephen Warren
2014-11-07 18:29           ` Scott Branden
2014-11-07 18:29             ` Scott Branden
2014-10-30  6:36   ` [PATCHv2 4/5] mmc: shdci-bcm2835: add verify for 32-bit back-to-back workaround Scott Branden
2014-10-30  6:36     ` Scott Branden
2014-11-05  4:44     ` Stephen Warren
2014-11-05  5:26       ` Scott Branden
2014-11-05  5:26         ` Scott Branden
2014-11-05  4:59     ` Stephen Warren
2014-11-05  7:00       ` Scott Branden
2014-11-05  7:00         ` Scott Branden
2014-11-06  5:01         ` Stephen Warren
2014-11-07 18:31           ` Scott Branden
2014-11-07 18:31             ` Scott Branden
2015-12-22 15:55             ` Stefan Wahren
2015-12-22 19:23               ` Scott Branden
2015-12-22 19:23                 ` Scott Branden
2015-12-22 20:13                 ` Stefan Wahren
2014-10-30  6:36   ` [PATCHv2 5/5] mmc: sdhci-bcm2835: add sdhci quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 Scott Branden
2014-10-30  6:36     ` Scott Branden
2014-11-05  5:00     ` Stephen Warren
2014-11-05  7:02       ` Scott Branden
2014-11-05  7:02         ` Scott Branden
2014-11-06  4:50         ` Stephen Warren
2014-11-07 18:30           ` Scott Branden
2014-11-07 18:30             ` Scott Branden
2014-11-10  5:55 ` [PATCH 1/2] ARM: multi_v7_defconfig: remove one level of menu from Kconfig Scott Branden
2014-11-10  5:55   ` Scott Branden
2014-11-10  5:55   ` [PATCH 2/2] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-11-10  5:55     ` Scott Branden
2014-11-14 18:29 ` [PATCH 0/4] pwm: kona: Drivers fixes Scott Branden
2014-11-14 18:29   ` Scott Branden
2014-11-14 18:29   ` [PATCH 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
2014-11-14 18:29     ` Scott Branden
2014-11-14 18:29   ` [PATCH 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
2014-11-14 18:29     ` Scott Branden
2014-11-14 18:29   ` [PATCH 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
2014-11-14 18:29     ` Scott Branden
2014-11-14 18:30   ` [PATCH 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
2014-11-14 18:30     ` Scott Branden
2014-11-17 12:52     ` Thierry Reding
2014-11-17 17:33       ` Scott Branden
2014-11-17 17:33         ` Scott Branden
2014-11-17 12:41   ` [PATCH 0/4] pwm: kona: Drivers fixes Thierry Reding
2014-11-20 19:18 ` [PATCH] mtd: nand: added nand_shutdown Scott Branden
2014-11-20 19:18   ` Scott Branden
2014-11-26  9:10   ` Brian Norris
2014-11-26  9:10     ` Brian Norris
2014-11-27 18:28     ` Scott Branden
2014-11-27 18:28       ` Scott Branden
2014-11-28  0:30     ` Scott Branden
2014-11-28  0:30       ` Scott Branden
2014-12-04 22:38     ` Scott Branden
2014-12-04 22:38       ` Scott Branden
2014-11-25 19:40 ` [PATCH v2 0/4] pwm: kona: Drivers fixes Scott Branden
2014-11-25 19:40   ` Scott Branden
2014-11-25 19:40   ` [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
2014-11-25 19:40     ` Scott Branden
2014-11-26  5:51     ` Tim Kryger
2014-11-28 23:47       ` Arun Ramamurthy
2014-11-28 23:47         ` Arun Ramamurthy
2014-11-29  1:08         ` Tim Kryger
2014-11-29  1:19           ` Arun Ramamurthy
2014-11-29  1:19             ` Arun Ramamurthy
2014-11-29  3:19             ` Tim Kryger
2014-12-01 19:37               ` Arun Ramamurthy
2014-12-01 19:37                 ` Arun Ramamurthy
2014-12-04 20:22               ` Jonathan Richardson
2014-12-04 20:22                 ` Jonathan Richardson
2014-12-06 23:13                 ` Tim Kryger
2014-12-10 19:57                   ` Jonathan Richardson
2014-12-10 19:57                     ` Jonathan Richardson
2014-11-25 19:40   ` [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
2014-11-25 19:40     ` Scott Branden
2014-11-26  6:22     ` Tim Kryger
2014-11-28 23:48       ` Arun Ramamurthy
2014-11-28 23:48         ` Arun Ramamurthy
2014-11-29  2:02         ` Tim Kryger
2014-12-04 20:33           ` Jonathan Richardson
2014-12-04 20:33             ` Jonathan Richardson
2014-11-25 19:40   ` [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
2014-11-25 19:40     ` Scott Branden
2014-11-26  7:29     ` Tim Kryger
2014-11-27 23:30       ` Scott Branden
2014-11-27 23:30         ` Scott Branden
2014-11-28 23:49       ` Arun Ramamurthy
2014-11-28 23:49         ` Arun Ramamurthy
2014-11-29  2:30         ` Tim Kryger
2014-12-01 19:37           ` Arun Ramamurthy
2014-12-01 19:37             ` Arun Ramamurthy
2014-12-02  4:29             ` Tim Kryger
2014-12-04 20:26       ` Jonathan Richardson
2014-12-04 20:26         ` Jonathan Richardson
2014-11-25 19:40   ` [PATCH v2 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
2014-11-25 19:40     ` Scott Branden
2014-12-04 22:37 ` [PATCH] mtd: add reboot notifier to mtdcore and register nand_shutdown with notifier Scott Branden
2014-12-04 22:37   ` Scott Branden
2014-12-05  0:13   ` Scott Branden [this message]
2014-12-05  0:13     ` Scott Branden
2014-12-05  2:31     ` Brian Norris
2014-12-05  2:31       ` Brian Norris
2014-12-05  0:11 ` [PATCH] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2014-12-05  0:11   ` Scott Branden
2014-12-05  0:16 ` [PATCH v2] " Scott Branden
2014-12-05  0:16   ` Scott Branden
2014-12-17 18:36   ` Scott Branden
2014-12-17 18:36     ` Scott Branden
2014-12-17 19:48   ` Chris Ball
2014-12-17 19:48     ` Chris Ball
2014-12-17 20:42     ` Scott Branden
2014-12-17 20:42       ` Scott Branden
2015-02-10  0:06 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10  0:06   ` Scott Branden
2015-02-10  0:06   ` Scott Branden
2015-02-10  0:06   ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-02-10  0:06     ` Scott Branden
2015-02-10  0:06     ` Scott Branden
2015-02-10  0:06   ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-02-10  0:06     ` Scott Branden
2015-02-10  0:06     ` Scott Branden
2015-02-10  0:06   ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-02-10  0:06     ` Scott Branden
2015-02-10  0:06     ` Scott Branden
2015-02-10  0:06   ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-02-10  0:06     ` Scott Branden
2015-02-10  0:06     ` Scott Branden
2015-03-02 23:50     ` Florian Fainelli
2015-03-02 23:50       ` Florian Fainelli
2015-03-04 23:14       ` Scott Branden
2015-03-04 23:14         ` Scott Branden
2015-03-04 23:14         ` Scott Branden
2015-02-26 17:28   ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-26 17:28     ` Scott Branden
2015-02-26 17:28     ` Scott Branden
2015-02-10  0:07 ` [PATCH 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-10  0:07   ` Scott Branden
2015-02-10  0:07   ` Scott Branden
2015-02-10  0:07   ` [PATCH 1/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-10  0:07     ` Scott Branden
2015-02-10  0:07     ` Scott Branden
2015-02-10  0:27     ` Joe Perches
2015-02-10  0:27       ` Joe Perches
2015-02-10  0:27       ` Joe Perches
2015-02-14 16:36       ` Scott Branden
2015-02-14 16:36         ` Scott Branden
2015-02-14 16:36         ` Scott Branden
2015-02-14 17:02         ` Scott Branden
2015-02-14 17:02           ` Scott Branden
2015-02-14 17:02           ` Scott Branden
2015-02-10  0:07   ` [PATCH 2/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-02-10  0:07     ` Scott Branden
2015-02-10  0:07     ` Scott Branden
2015-02-10  0:07 ` [PATCH 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-10  0:07   ` Scott Branden
2015-02-10  0:07   ` Scott Branden
2015-02-10  0:07   ` [PATCH 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-10  0:07     ` Scott Branden
2015-02-10  0:07     ` Scott Branden
2015-02-10  0:51     ` Dmitry Torokhov
2015-02-10  0:51       ` Dmitry Torokhov
2015-02-10  0:51       ` Dmitry Torokhov
2015-02-14 16:49       ` Scott Branden
2015-02-14 16:49         ` Scott Branden
2015-02-14 16:49         ` Scott Branden
2015-02-16  5:17         ` Dmitry Torokhov
2015-02-16  5:17           ` Dmitry Torokhov
2015-02-16  5:17           ` Dmitry Torokhov
2015-02-23 17:49           ` Dmitry Torokhov
2015-02-23 17:49             ` Dmitry Torokhov
2015-02-23 17:49             ` Dmitry Torokhov
2015-02-26 16:13             ` Scott Branden
2015-02-26 16:13               ` Scott Branden
2015-02-26 16:13               ` Scott Branden
2015-02-10  0:07   ` [PATCH 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-10  0:07     ` Scott Branden
2015-02-10  0:07     ` Scott Branden
2015-02-10  1:02     ` Dmitry Torokhov
2015-02-10  1:02       ` Dmitry Torokhov
2015-02-14 17:12       ` Scott Branden
2015-02-14 17:12         ` Scott Branden
2015-02-14 17:12         ` Scott Branden
2015-02-25 18:16 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-25 18:16   ` Scott Branden
2015-02-25 18:16   ` Scott Branden
2015-02-25 18:16   ` [PATCH v2 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-02-25 18:16     ` Scott Branden
2015-02-25 18:16     ` Scott Branden
2015-03-02 23:47     ` Florian Fainelli
2015-03-02 23:47       ` Florian Fainelli
2015-02-25 18:16   ` [PATCH v2 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-25 18:16     ` Scott Branden
2015-02-25 18:16     ` Scott Branden
2015-02-25 18:43     ` Dmitry Torokhov
2015-02-25 18:43       ` Dmitry Torokhov
2015-03-03  0:50       ` Scott Branden
2015-03-03  0:50         ` Scott Branden
2015-03-03  0:50         ` Scott Branden
2015-02-25 19:17     ` Arnd Bergmann
2015-02-25 19:17       ` Arnd Bergmann
2015-02-25 19:17       ` Arnd Bergmann
2015-02-26 19:37       ` Scott Branden
2015-02-26 19:37         ` Scott Branden
2015-02-26 19:37         ` Scott Branden
2015-02-26 20:15         ` Arnd Bergmann
2015-02-26 20:15           ` Arnd Bergmann
2015-02-26 22:26           ` Scott Branden
2015-02-26 22:26             ` Scott Branden
2015-02-26 22:26             ` Scott Branden
2015-02-27  9:14             ` Arnd Bergmann
2015-02-27  9:14               ` Arnd Bergmann
2015-02-27  9:14               ` Arnd Bergmann
2015-02-28 16:01               ` Scott Branden
2015-02-28 16:01                 ` Scott Branden
2015-02-28 16:01                 ` Scott Branden
2015-02-28 19:31                 ` Arnd Bergmann
2015-02-28 19:31                   ` Arnd Bergmann
2015-03-02 19:41                   ` Scott Branden
2015-03-02 19:41                     ` Scott Branden
2015-03-02 19:41                     ` Scott Branden
2015-03-02 10:23   ` [PATCH v2 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-03-02 10:23     ` Herbert Xu
2015-03-02 10:23     ` Herbert Xu
2015-02-26 16:08 ` [PATCH v2 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-26 16:08   ` Scott Branden
2015-02-26 16:08   ` Scott Branden
2015-02-26 16:08   ` [PATCH v2 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-26 16:08     ` Scott Branden
2015-02-26 16:08     ` Scott Branden
2015-02-27 23:39     ` Dmitry Torokhov
2015-02-27 23:39       ` Dmitry Torokhov
2015-02-27 23:39       ` Dmitry Torokhov
2015-02-28 15:41       ` Scott Branden
2015-02-28 15:41         ` Scott Branden
2015-02-28 15:41         ` Scott Branden
2015-02-26 16:08   ` [PATCH v2 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-26 16:08     ` Scott Branden
2015-02-26 16:08     ` Scott Branden
2015-02-27 23:44     ` Dmitry Torokhov
2015-02-27 23:44       ` Dmitry Torokhov
2015-02-27 23:44       ` Dmitry Torokhov
2015-02-28 15:52       ` Scott Branden
2015-02-28 15:52         ` Scott Branden
2015-02-28 15:52         ` Scott Branden
2015-02-28 14:16     ` Paul Bolle
2015-02-28 14:16       ` Paul Bolle
2015-02-28 15:36       ` Scott Branden
2015-02-28 15:36         ` Scott Branden
2015-02-28 15:36         ` Scott Branden
2015-02-28 16:03 ` [PATCH v3 0/2] Add support for " Scott Branden
2015-02-28 16:03   ` Scott Branden
2015-02-28 16:03   ` Scott Branden
2015-02-28 16:03   ` [PATCH v3 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-28 16:03     ` Scott Branden
2015-02-28 16:03     ` Scott Branden
2015-02-28 16:03   ` [PATCH v3 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 16:03     ` Scott Branden
2015-02-28 16:03     ` Scott Branden
2015-02-28 16:35 ` [PATCH v4 0/2] Add support for " Scott Branden
2015-02-28 16:35   ` Scott Branden
2015-02-28 16:35   ` Scott Branden
2015-02-28 16:35   ` [PATCH v4 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-28 16:35     ` Scott Branden
2015-02-28 16:35     ` Scott Branden
2015-03-03  0:04     ` Dmitry Torokhov
2015-03-03  0:04       ` Dmitry Torokhov
2015-03-03  0:04       ` Dmitry Torokhov
2015-02-28 16:35   ` [PATCH v4 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 16:35     ` Scott Branden
2015-02-28 16:35     ` Scott Branden
2015-02-28 22:10     ` Dmitry Torokhov
2015-02-28 22:10       ` Dmitry Torokhov
2015-02-28 22:10       ` Dmitry Torokhov
2015-02-28 22:15       ` Dmitry Torokhov
2015-02-28 22:15         ` Dmitry Torokhov
2015-02-28 22:15         ` Dmitry Torokhov
2015-03-02 19:37         ` Scott Branden
2015-03-02 19:37           ` Scott Branden
2015-03-02 19:37           ` Scott Branden
2015-03-02 20:23           ` Dmitry Torokhov
2015-03-02 20:23             ` Dmitry Torokhov
2015-03-02 21:59             ` Scott Branden
2015-03-02 21:59               ` Scott Branden
2015-03-02 21:59               ` Scott Branden
2015-03-02 19:38         ` Scott Branden
2015-03-02 19:38           ` Scott Branden
2015-03-02 19:38           ` Scott Branden
2015-03-04 20:42 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Scott Branden
2015-03-04 20:42   ` Scott Branden
2015-03-04 20:42   ` Scott Branden
2015-03-04 20:42   ` [PATCH v3 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-04 20:42     ` Scott Branden
2015-03-04 20:42     ` Scott Branden
2015-03-04 20:42   ` [PATCH v3 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-03-04 20:42     ` Scott Branden
2015-03-04 20:42     ` Scott Branden
2015-03-06 11:53   ` [PATCH v3 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-03-06 11:53     ` Herbert Xu
2015-03-05 15:59 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-03-05 15:59   ` Scott Branden
2015-03-05 15:59   ` Scott Branden
2015-03-05 15:59   ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-03-05 15:59     ` Scott Branden
2015-03-05 15:59     ` Scott Branden
2015-03-05 15:59   ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-03-05 15:59     ` Scott Branden
2015-03-05 15:59     ` Scott Branden
2015-03-05 15:59   ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-03-05 15:59     ` Scott Branden
2015-03-05 15:59     ` Scott Branden
2015-03-05 15:59   ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-05 15:59     ` Scott Branden
2015-03-05 15:59     ` Scott Branden
2015-03-05 16:16   ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Ulf Hansson
2015-03-05 16:16     ` Ulf Hansson
2015-03-05 16:16     ` Ulf Hansson
2015-03-05 19:57     ` Florian Fainelli
2015-03-05 19:57       ` Florian Fainelli
2015-03-05 19:57       ` Florian Fainelli
2015-03-10 18:35 ` [PATCH] mmc: sdhci: fix card presence logic in sdhci_request function Scott Branden
2015-03-10 18:35   ` Scott Branden
2015-03-13 10:14   ` Ulf Hansson
2015-03-16 17:59 ` [PATCH] wireless: rt2x00: add new rt2800usb device DWA 130 Scott Branden
2015-03-20  6:45   ` Kalle Valo
2015-03-16 18:19 ` [PATCH] ARM: amba: Increase number of IRQs Scott Branden
2015-03-16 18:19   ` Scott Branden
2015-03-16 21:08   ` Russell King - ARM Linux
2015-03-16 21:08     ` Russell King - ARM Linux
2015-03-16 21:18     ` Scott Branden
2015-03-16 21:18       ` Scott Branden
2015-03-16 21:16 ` [PATCH v2 1/1] " Scott Branden
2015-03-16 21:16   ` Scott Branden

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5480F88D.4090707@broadcom.com \
    --to=sbranden@broadcom.com \
    --cc=cdoban@broadcom.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=rjui@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.