* [U-Boot] [PATCH] powerpc/t4240rdb: enable eSDHC 3.3V support
@ 2014-11-18 1:12 Xie Xiaobo
2014-12-05 16:38 ` York Sun
0 siblings, 1 reply; 2+ messages in thread
From: Xie Xiaobo @ 2014-11-18 1:12 UTC (permalink / raw)
To: u-boot
The SD supply Voltage was 3.3V on T4240RDB, so enabled 3.3V support for eSDHC.
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Wujie Qiu <B49553@freescale.com>
---
include/configs/T4240RDB.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 13f4bd3..38ea1ba 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -667,6 +667,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#endif
/* Hash command with SHA acceleration supported in hardware */
--
1.8.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] powerpc/t4240rdb: enable eSDHC 3.3V support
2014-11-18 1:12 [U-Boot] [PATCH] powerpc/t4240rdb: enable eSDHC 3.3V support Xie Xiaobo
@ 2014-12-05 16:38 ` York Sun
0 siblings, 0 replies; 2+ messages in thread
From: York Sun @ 2014-12-05 16:38 UTC (permalink / raw)
To: u-boot
On 11/17/2014 05:12 PM, Xie Xiaobo wrote:
> The SD supply Voltage was 3.3V on T4240RDB, so enabled 3.3V support for eSDHC.
>
> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
> Signed-off-by: Wujie Qiu <B49553@freescale.com>
> ---
Applied to u-boot-mpc85xx, awaiting upstream.
York
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-12-05 16:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-11-18 1:12 [U-Boot] [PATCH] powerpc/t4240rdb: enable eSDHC 3.3V support Xie Xiaobo
2014-12-05 16:38 ` York Sun
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.