[PATCH v4 00/18] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

[PATCH v4 00/18] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

[Marek Szyprowski]

Hello Everyone,

This is yet another attempt to get Exynos SYSMMU driver with integrated
with IOMMU & DMA-mapping subsystems. The main change from previous
version is a rebase onto latest v3.19-rc4 kernel base, which includes
"automatic DMA configuration for IOMMU masters" patches developed by
Will Deacon. The other change is long avaited addition of DTS patches
for Exynos 5250 and 5420/5422/5800.

Merge plan for this patchset:

1. All iommu related patches (with 'iommu: exynos') can be merged to
iommu tree. They don't have any direct dependencies on the DTS, DRM and
power domain initialization change - without them the driver will simply
not initialize, when no exynos,sysmmu nodes are provided in device tree.
Joerg, could you merge those patches?

2. DTS and power domain patches should go to Samsung Exynos tree. Those
patches depends on my earlier DTS patches for Exynos SoCs, which make
this patchset really complete:
- 'ARM: DTS: Exynos: convert to generic power domain bindings'
  (http://www.spinics.net/lists/linux-samsung-soc/msg40584.html)
- '[PATCH v3 0/7] Enable HDMI support on Exynos platforms'
  (http://www.spinics.net/lists/arm-kernel/msg391148.html)
Kukjin, could you merge those patches?

3. Exynos DRM fix. This patch in my opinion should go Exynos DRM tree.
Inki, could you merge it?


Best regards
Marek Szyprowski
Samsung R&D Institute Poland


Changelog:
v4:
- rebased onto v3.19-rc4 and other Exynos DTS queued patches
- added DTS patch for Exynos 5250 & 5420/5422/5800


v3: http://www.spinics.net/lists/linux-samsung-soc/msg39168.html
- rebased onto "[RFC PATCH v4 0/8] Introduce automatic DMA
  configuration for IOMMU masters"
- added some minor fixes for iommu and dma-mapping frameworks

v2: http://thread.gmane.org/gmane.linux.kernel.iommu/6472/
- rebased onto "[RFC PATCH v3 0/7] Introduce automatic DMA
  configuration for IOMMU masters" patches:
  http://www.spinics.net/lists/arm-kernel/msg362076.html
- changed initialization from bus notifiers to DT related callbacks
- removed support for separate IO address spaces - this will be
  discussed separately after the basic support gets merged
- removed support for power domain notifier-based runtime power
  management - this also will be discussed separately later

v1: https://lkml.org/lkml/2014/8/5/183
- initial version, feature complete, completely rewrote integration
  approach


Patch summary:

Marek Szyprowski (18):
  drm: exynos: detach from default dma-mapping domain on init
  arm: exynos: pm_domains: add support for devices registered before
    arch_initcall
  ARM: dts: exynos4: add sysmmu nodes
  ARM: dts: exynos5250: add sysmmu nodes
  ARM: dts: exynos5420: add sysmmu nodes
  iommu: exynos: don't read version register on every tlb operation
  iommu: exynos: remove unused functions
  iommu: exynos: remove useless spinlock
  iommu: exynos: refactor function parameters to simplify code
  iommu: exynos: remove unused functions, part 2
  iommu: exynos: remove useless device_add/remove callbacks
  iommu: exynos: add support for binding more than one sysmmu to master
    device
  iommu: exynos: add support for runtime_pm
  iommu: exynos: rename variables to reflect their purpose
  iommu: exynos: document internal structures
  iommu: exynos: remove excessive includes and sort others
    alphabetically
  iommu: exynos: init from dt-specific callback instead of initcall
  iommu: exynos: add callback for initializing devices from device tree

 arch/arm/boot/dts/exynos4.dtsi            | 118 +++++++
 arch/arm/boot/dts/exynos4210.dtsi         |  23 ++
 arch/arm/boot/dts/exynos4x12.dtsi         |  82 +++++
 arch/arm/boot/dts/exynos5250.dtsi         | 250 +++++++++++++++
 arch/arm/boot/dts/exynos5420.dtsi         | 178 +++++++++++
 arch/arm/mach-exynos/pm_domains.c         |   9 +-
 drivers/gpu/drm/exynos/exynos_drm_iommu.c |   3 +
 drivers/iommu/exynos-iommu.c              | 490 ++++++++++++++----------------
 8 files changed, 884 insertions(+), 269 deletions(-)

-- 
1.9.2

[PATCH v4 00/18] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

[Marek Szyprowski]

Hello Everyone,

This is yet another attempt to get Exynos SYSMMU driver with integrated
with IOMMU & DMA-mapping subsystems. The main change from previous
version is a rebase onto latest v3.19-rc4 kernel base, which includes
"automatic DMA configuration for IOMMU masters" patches developed by
Will Deacon. The other change is long avaited addition of DTS patches
for Exynos 5250 and 5420/5422/5800.

Merge plan for this patchset:

1. All iommu related patches (with 'iommu: exynos') can be merged to
iommu tree. They don't have any direct dependencies on the DTS, DRM and
power domain initialization change - without them the driver will simply
not initialize, when no exynos,sysmmu nodes are provided in device tree.
Joerg, could you merge those patches?

2. DTS and power domain patches should go to Samsung Exynos tree. Those
patches depends on my earlier DTS patches for Exynos SoCs, which make
this patchset really complete:
- 'ARM: DTS: Exynos: convert to generic power domain bindings'
  (http://www.spinics.net/lists/linux-samsung-soc/msg40584.html)
- '[PATCH v3 0/7] Enable HDMI support on Exynos platforms'
  (http://www.spinics.net/lists/arm-kernel/msg391148.html)
Kukjin, could you merge those patches?

3. Exynos DRM fix. This patch in my opinion should go Exynos DRM tree.
Inki, could you merge it?


Best regards
Marek Szyprowski
Samsung R&D Institute Poland


Changelog:
v4:
- rebased onto v3.19-rc4 and other Exynos DTS queued patches
- added DTS patch for Exynos 5250 & 5420/5422/5800


v3: http://www.spinics.net/lists/linux-samsung-soc/msg39168.html
- rebased onto "[RFC PATCH v4 0/8] Introduce automatic DMA
  configuration for IOMMU masters"
- added some minor fixes for iommu and dma-mapping frameworks

v2: http://thread.gmane.org/gmane.linux.kernel.iommu/6472/
- rebased onto "[RFC PATCH v3 0/7] Introduce automatic DMA
  configuration for IOMMU masters" patches:
  http://www.spinics.net/lists/arm-kernel/msg362076.html
- changed initialization from bus notifiers to DT related callbacks
- removed support for separate IO address spaces - this will be
  discussed separately after the basic support gets merged
- removed support for power domain notifier-based runtime power
  management - this also will be discussed separately later

v1: https://lkml.org/lkml/2014/8/5/183
- initial version, feature complete, completely rewrote integration
  approach


Patch summary:

Marek Szyprowski (18):
  drm: exynos: detach from default dma-mapping domain on init
  arm: exynos: pm_domains: add support for devices registered before
    arch_initcall
  ARM: dts: exynos4: add sysmmu nodes
  ARM: dts: exynos5250: add sysmmu nodes
  ARM: dts: exynos5420: add sysmmu nodes
  iommu: exynos: don't read version register on every tlb operation
  iommu: exynos: remove unused functions
  iommu: exynos: remove useless spinlock
  iommu: exynos: refactor function parameters to simplify code
  iommu: exynos: remove unused functions, part 2
  iommu: exynos: remove useless device_add/remove callbacks
  iommu: exynos: add support for binding more than one sysmmu to master
    device
  iommu: exynos: add support for runtime_pm
  iommu: exynos: rename variables to reflect their purpose
  iommu: exynos: document internal structures
  iommu: exynos: remove excessive includes and sort others
    alphabetically
  iommu: exynos: init from dt-specific callback instead of initcall
  iommu: exynos: add callback for initializing devices from device tree

 arch/arm/boot/dts/exynos4.dtsi            | 118 +++++++
 arch/arm/boot/dts/exynos4210.dtsi         |  23 ++
 arch/arm/boot/dts/exynos4x12.dtsi         |  82 +++++
 arch/arm/boot/dts/exynos5250.dtsi         | 250 +++++++++++++++
 arch/arm/boot/dts/exynos5420.dtsi         | 178 +++++++++++
 arch/arm/mach-exynos/pm_domains.c         |   9 +-
 drivers/gpu/drm/exynos/exynos_drm_iommu.c |   3 +
 drivers/iommu/exynos-iommu.c              | 490 ++++++++++++++----------------
 8 files changed, 884 insertions(+), 269 deletions(-)

-- 
1.9.2

[PATCH v4 01/18] drm: exynos: detach from default dma-mapping domain on init

[Marek Szyprowski]

This patch adds code, which detach sub-device nodes from default iommu
domain if such has been configured.

Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 drivers/gpu/drm/exynos/exynos_drm_iommu.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_iommu.c b/drivers/gpu/drm/exynos/exynos_drm_iommu.c
index b32b291f88ff..323601a52a25 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_iommu.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_iommu.c
@@ -100,6 +100,9 @@ int drm_iommu_attach_device(struct drm_device *drm_dev,
 
 	dma_set_max_seg_size(subdrv_dev, 0xffffffffu);
 
+	if (subdrv_dev->archdata.mapping)
+		arm_iommu_detach_device(subdrv_dev);
+
 	ret = arm_iommu_attach_device(subdrv_dev, dev->archdata.mapping);
 	if (ret < 0) {
 		DRM_DEBUG_KMS("failed iommu attach.\n");
-- 
1.9.2

[PATCH v4 01/18] drm: exynos: detach from default dma-mapping domain on init

[Marek Szyprowski]

This patch adds code, which detach sub-device nodes from default iommu
domain if such has been configured.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_iommu.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_iommu.c b/drivers/gpu/drm/exynos/exynos_drm_iommu.c
index b32b291f88ff..323601a52a25 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_iommu.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_iommu.c
@@ -100,6 +100,9 @@ int drm_iommu_attach_device(struct drm_device *drm_dev,
 
 	dma_set_max_seg_size(subdrv_dev, 0xffffffffu);
 
+	if (subdrv_dev->archdata.mapping)
+		arm_iommu_detach_device(subdrv_dev);
+
 	ret = arm_iommu_attach_device(subdrv_dev, dev->archdata.mapping);
 	if (ret < 0) {
 		DRM_DEBUG_KMS("failed iommu attach.\n");
-- 
1.9.2

[PATCH v4 02/18] arm: exynos: pm_domains: add support for devices registered before arch_initcall

[Marek Szyprowski]

SYSMMU devices will be registered early before any other devices and
before calling arch_initcall. To add them to respective power domains,
additional scan of all platform devices is needed.

Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/mach-exynos/pm_domains.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 37266a826437..0e2bc366b5eb 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -105,6 +105,12 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain)
 	return exynos_pd_power(domain, false);
 }
 
+static __init int exynos_pd_init_platform_dev(struct device *dev, void *data)
+{
+	dev_pm_domain_attach(dev, true);
+	return 0;
+}
+
 static __init int exynos4_pm_init_power_domain(void)
 {
 	struct platform_device *pdev;
@@ -189,6 +195,7 @@ no_clk:
 		of_node_put(np);
 	}
 
-	return 0;
+	return bus_for_each_dev(&platform_bus_type, NULL, NULL,
+				exynos_pd_init_platform_dev);
 }
 arch_initcall(exynos4_pm_init_power_domain);
-- 
1.9.2

[PATCH v4 02/18] arm: exynos: pm_domains: add support for devices registered before arch_initcall

[Marek Szyprowski]

SYSMMU devices will be registered early before any other devices and
before calling arch_initcall. To add them to respective power domains,
additional scan of all platform devices is needed.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/mach-exynos/pm_domains.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 37266a826437..0e2bc366b5eb 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -105,6 +105,12 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain)
 	return exynos_pd_power(domain, false);
 }
 
+static __init int exynos_pd_init_platform_dev(struct device *dev, void *data)
+{
+	dev_pm_domain_attach(dev, true);
+	return 0;
+}
+
 static __init int exynos4_pm_init_power_domain(void)
 {
 	struct platform_device *pdev;
@@ -189,6 +195,7 @@ no_clk:
 		of_node_put(np);
 	}
 
-	return 0;
+	return bus_for_each_dev(&platform_bus_type, NULL, NULL,
+				exynos_pd_init_platform_dev);
 }
 arch_initcall(exynos4_pm_init_power_domain);
-- 
1.9.2

[PATCH v4 03/18] ARM: dts: exynos4: add sysmmu nodes

[Marek Szyprowski]

This patch adds System MMU nodes that are specific to Exynos4210/4x12 series.

Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/boot/dts/exynos4.dtsi    | 118 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos4210.dtsi |  23 ++++++++
 arch/arm/boot/dts/exynos4x12.dtsi |  82 ++++++++++++++++++++++++++
 3 files changed, 223 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index a59b3fae3680..ca219ed0378c 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -183,6 +183,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc0>;
 			status = "disabled";
 		};
 
@@ -194,6 +195,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc1>;
 			status = "disabled";
 		};
 
@@ -205,6 +207,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc2>;
 			status = "disabled";
 		};
 
@@ -216,6 +219,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc3>;
 			status = "disabled";
 		};
 
@@ -404,6 +408,8 @@
 		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
 		clock-names = "mfc", "sclk_mfc";
 		status = "disabled";
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 	};
 
 	serial_0: serial@13800000 {
@@ -669,6 +675,7 @@
 		power-domains = <&pd_lcd0>;
 		samsung,sysreg = <&sys_reg>;
 		status = "disabled";
+		iommus = <&sysmmu_fimd0>;
 	};
 
 	hdmi: hdmi@12D00000 {
@@ -691,6 +698,117 @@
 		interrupts = <0 91 0>;
 		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
 		power-domains = <&pd_tv>;
+		iommus = <&sysmmu_tv>;
 		status = "disabled";
 	};
+
+	sysmmu_mfc_l: sysmmu@13620000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13620000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		power-domains = <&pd_mfc>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu@13630000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13630000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		power-domains = <&pd_mfc>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu@12E20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12E20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+		power-domains = <&pd_tv>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc0: sysmmu@11A20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc1: sysmmu@11A30000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A30000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 3>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc2: sysmmu@11A40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc3: sysmmu@11A50000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A50000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg: sysmmu@11A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_rotator: sysmmu@12A30000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12A30000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd0: sysmmu@11E20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11E20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index fc17cdfa90e6..a2acb8b93785 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -160,6 +160,7 @@
 		interrupts = <0 89 0>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
+		iommus = <&sysmmu_g2d>;
 		status = "disabled";
 	};
 
@@ -201,4 +202,26 @@
 			<&clock CLK_VP>, <&clock CLK_MOUT_MIXER>,
 			<&clock CLK_SCLK_MIXER>;
 	};
+
+	sysmmu_g2d: sysmmu@12A20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12A20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 7>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1: sysmmu@12220000 {
+		compatible = "samsung,exynos-sysmmu";
+		interrupt-parent = <&combiner>;
+		reg = <0x12220000 0x1000>;
+		interrupts = <5 3>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+		power-domains = <&pd_lcd1>;
+		#iommu-cells = <0>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index e577bd0106b6..d175eb34de7b 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -150,6 +150,7 @@
 		interrupts = <0 89 0>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
+		iommus = <&sysmmu_g2d>;
 		status = "disabled";
 	};
 
@@ -199,6 +200,7 @@
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
+			iommus = <&sysmmu_fimc_lite0>;
 			status = "disabled";
 		};
 
@@ -209,6 +211,7 @@
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
+			iommus = <&sysmmu_fimc_lite1>;
 			status = "disabled";
 		};
 
@@ -237,6 +240,9 @@
 				      "mcuispdiv1", "uart", "aclk200",
 				      "div_aclk200", "aclk400mcuisp",
 				      "div_aclk400mcuisp";
+			iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+				 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+			iommu-names = "isp", "drc", "fd", "mcuctl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -294,4 +300,80 @@
 		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>,
 			<&clock CLK_VP>;
 	};
+
+	sysmmu_g2d: sysmmu@10A40000{
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 7>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_isp: sysmmu@12260000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12260000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 2>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_ISP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_drc: sysmmu@12270000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12270000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 3>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_DRC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_fd: sysmmu@122A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x122A0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 4>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FD>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_mcuctl: sysmmu@122B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x122B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 5>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_ISPCX>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite0: sysmmu@123B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x123B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 0>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite1: sysmmu@123C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x123C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 1>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
+		#iommu-cells = <0>;
+	};
 };
-- 
1.9.2

[PATCH v4 03/18] ARM: dts: exynos4: add sysmmu nodes

[Marek Szyprowski]

This patch adds System MMU nodes that are specific to Exynos4210/4x12 series.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi    | 118 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos4210.dtsi |  23 ++++++++
 arch/arm/boot/dts/exynos4x12.dtsi |  82 ++++++++++++++++++++++++++
 3 files changed, 223 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index a59b3fae3680..ca219ed0378c 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -183,6 +183,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc0>;
 			status = "disabled";
 		};
 
@@ -194,6 +195,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc1>;
 			status = "disabled";
 		};
 
@@ -205,6 +207,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc2>;
 			status = "disabled";
 		};
 
@@ -216,6 +219,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc3>;
 			status = "disabled";
 		};
 
@@ -404,6 +408,8 @@
 		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
 		clock-names = "mfc", "sclk_mfc";
 		status = "disabled";
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 	};
 
 	serial_0: serial at 13800000 {
@@ -669,6 +675,7 @@
 		power-domains = <&pd_lcd0>;
 		samsung,sysreg = <&sys_reg>;
 		status = "disabled";
+		iommus = <&sysmmu_fimd0>;
 	};
 
 	hdmi: hdmi at 12D00000 {
@@ -691,6 +698,117 @@
 		interrupts = <0 91 0>;
 		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
 		power-domains = <&pd_tv>;
+		iommus = <&sysmmu_tv>;
 		status = "disabled";
 	};
+
+	sysmmu_mfc_l: sysmmu at 13620000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13620000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		power-domains = <&pd_mfc>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu at 13630000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13630000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		power-domains = <&pd_mfc>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu at 12E20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12E20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+		power-domains = <&pd_tv>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc0: sysmmu at 11A20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc1: sysmmu at 11A30000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A30000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 3>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc2: sysmmu at 11A40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc3: sysmmu at 11A50000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A50000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg: sysmmu at 11A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_rotator: sysmmu at 12A30000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12A30000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd0: sysmmu at 11E20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11E20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index fc17cdfa90e6..a2acb8b93785 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -160,6 +160,7 @@
 		interrupts = <0 89 0>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
+		iommus = <&sysmmu_g2d>;
 		status = "disabled";
 	};
 
@@ -201,4 +202,26 @@
 			<&clock CLK_VP>, <&clock CLK_MOUT_MIXER>,
 			<&clock CLK_SCLK_MIXER>;
 	};
+
+	sysmmu_g2d: sysmmu at 12A20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12A20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 7>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1: sysmmu at 12220000 {
+		compatible = "samsung,exynos-sysmmu";
+		interrupt-parent = <&combiner>;
+		reg = <0x12220000 0x1000>;
+		interrupts = <5 3>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+		power-domains = <&pd_lcd1>;
+		#iommu-cells = <0>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index e577bd0106b6..d175eb34de7b 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -150,6 +150,7 @@
 		interrupts = <0 89 0>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
+		iommus = <&sysmmu_g2d>;
 		status = "disabled";
 	};
 
@@ -199,6 +200,7 @@
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
+			iommus = <&sysmmu_fimc_lite0>;
 			status = "disabled";
 		};
 
@@ -209,6 +211,7 @@
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
+			iommus = <&sysmmu_fimc_lite1>;
 			status = "disabled";
 		};
 
@@ -237,6 +240,9 @@
 				      "mcuispdiv1", "uart", "aclk200",
 				      "div_aclk200", "aclk400mcuisp",
 				      "div_aclk400mcuisp";
+			iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+				 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+			iommu-names = "isp", "drc", "fd", "mcuctl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -294,4 +300,80 @@
 		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>,
 			<&clock CLK_VP>;
 	};
+
+	sysmmu_g2d: sysmmu at 10A40000{
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 7>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_isp: sysmmu at 12260000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12260000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 2>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_ISP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_drc: sysmmu at 12270000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12270000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 3>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_DRC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_fd: sysmmu at 122A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x122A0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 4>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FD>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_mcuctl: sysmmu at 122B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x122B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 5>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_ISPCX>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite0: sysmmu at 123B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x123B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 0>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite1: sysmmu at 123C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x123C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 1>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
+		#iommu-cells = <0>;
+	};
 };
-- 
1.9.2

[PATCH v4 04/18] ARM: dts: exynos5250: add sysmmu nodes

[Marek Szyprowski]

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos5250.dtsi | 250 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 250 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index cf4a6ec62f71..30d29ff502a7 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -224,6 +224,7 @@
 		interrupts = <0 91 0>;
 		clocks = <&clock CLK_G2D>;
 		clock-names = "fimg2d";
+		iommus = <&sysmmu_g2d>;
 	};
 
 	mfc: codec@11000000 {
@@ -233,6 +234,8 @@
 		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 	};
 
 	rtc: rtc@101E0000 {
@@ -693,6 +696,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc1>;
 	};
 
 	gsc_1:  gsc@13e10000 {
@@ -702,6 +706,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc1>;
 	};
 
 	gsc_2:  gsc@13e20000 {
@@ -711,6 +716,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL2>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc2>;
 	};
 
 	gsc_3:  gsc@13e30000 {
@@ -720,6 +726,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL3>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc3>;
 	};
 
 	hdmi: hdmi {
@@ -742,6 +749,7 @@
 		interrupts = <0 94 0>;
 		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "sclk_hdmi";
+		iommus = <&sysmmu_tv>;
 	};
 
 	dp_phy: video-phy@10040720 {
@@ -762,6 +770,7 @@
 		power-domains = <&pd_disp1>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
+		iommus = <&sysmmu_fimd1>;
 	};
 
 	adc: adc@12D10000 {
@@ -783,4 +792,245 @@
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
 	};
+
+	sysmmu_gsc0: sysmmu@13E80000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E80000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 0>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc1: sysmmu@13E90000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E90000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc2: sysmmu@13EA0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13EA0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 4>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc3: sysmmu@13EB0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13EB0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 6>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu@11200000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11200000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <6 2>;
+		power-domains = <&pd_mfc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_l: sysmmu@11210000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11210000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <8 5>;
+		power-domains = <&pd_mfc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu@14650000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14650000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <7 4>;
+		power-domains = <&pd_disp1>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1: sysmmu@14640000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14640000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 2>;
+		power-domains = <&pd_disp1>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_g2d: sysmmu@10A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_rotator: sysmmu@11D40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11D40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_jpeg: sysmmu@11F20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_isp: sysmmu@13260000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13260000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_ISP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_drc: sysmmu@13270000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13270000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <11 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DRC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_fd: sysmmu@132A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132A0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 0>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_FD>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_scc: sysmmu@13280000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13280000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 2>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_SCC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_scp: sysmmu@13290000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13290000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_SCP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_mcuctl: sysmmu@132B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_MCU>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_odc: sysmmu@132C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <11 0>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_ODC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_dis0: sysmmu@132D0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132D0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_dis1: sysmmu@132E0000{
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132E0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <9 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_3dnr: sysmmu@132F0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132F0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite0: sysmmu@13C40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13C40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 4>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite1: sysmmu@13C50000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13C50000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 1>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+		#iommu-cells = <0>;
+	};
 };
-- 
1.9.2

[PATCH v4 04/18] ARM: dts: exynos5250: add sysmmu nodes

[Marek Szyprowski]

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos5250.dtsi | 250 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 250 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index cf4a6ec62f71..30d29ff502a7 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -224,6 +224,7 @@
 		interrupts = <0 91 0>;
 		clocks = <&clock CLK_G2D>;
 		clock-names = "fimg2d";
+		iommus = <&sysmmu_g2d>;
 	};
 
 	mfc: codec at 11000000 {
@@ -233,6 +234,8 @@
 		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 	};
 
 	rtc: rtc at 101E0000 {
@@ -693,6 +696,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc1>;
 	};
 
 	gsc_1:  gsc at 13e10000 {
@@ -702,6 +706,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc1>;
 	};
 
 	gsc_2:  gsc at 13e20000 {
@@ -711,6 +716,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL2>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc2>;
 	};
 
 	gsc_3:  gsc at 13e30000 {
@@ -720,6 +726,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL3>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc3>;
 	};
 
 	hdmi: hdmi {
@@ -742,6 +749,7 @@
 		interrupts = <0 94 0>;
 		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "sclk_hdmi";
+		iommus = <&sysmmu_tv>;
 	};
 
 	dp_phy: video-phy at 10040720 {
@@ -762,6 +770,7 @@
 		power-domains = <&pd_disp1>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
+		iommus = <&sysmmu_fimd1>;
 	};
 
 	adc: adc at 12D10000 {
@@ -783,4 +792,245 @@
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
 	};
+
+	sysmmu_gsc0: sysmmu at 13E80000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E80000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 0>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc1: sysmmu at 13E90000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E90000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc2: sysmmu at 13EA0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13EA0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 4>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc3: sysmmu at 13EB0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13EB0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 6>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu at 11200000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11200000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <6 2>;
+		power-domains = <&pd_mfc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_l: sysmmu at 11210000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11210000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <8 5>;
+		power-domains = <&pd_mfc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu at 14650000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14650000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <7 4>;
+		power-domains = <&pd_disp1>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1: sysmmu at 14640000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14640000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 2>;
+		power-domains = <&pd_disp1>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_g2d: sysmmu at 10A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_rotator: sysmmu at 11D40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11D40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_jpeg: sysmmu at 11F20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_isp: sysmmu at 13260000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13260000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_ISP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_drc: sysmmu at 13270000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13270000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <11 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DRC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_fd: sysmmu at 132A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132A0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 0>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_FD>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_scc: sysmmu at 13280000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13280000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 2>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_SCC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_scp: sysmmu at 13290000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13290000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_SCP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_mcuctl: sysmmu at 132B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_MCU>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_odc: sysmmu at 132C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <11 0>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_ODC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_dis0: sysmmu at 132D0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132D0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_dis1: sysmmu at 132E0000{
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132E0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <9 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_3dnr: sysmmu at 132F0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132F0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite0: sysmmu at 13C40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13C40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 4>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite1: sysmmu at 13C50000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13C50000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 1>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+		#iommu-cells = <0>;
+	};
 };
-- 
1.9.2

[PATCH v4 05/18] ARM: dts: exynos5420: add sysmmu nodes

[Marek Szyprowski]

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos5420.dtsi | 178 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 178 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 03ef2481c640..6d8e73bcfff8 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -179,6 +179,8 @@
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 		power-domains = <&mfc_pd>;
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 	};
 
 	mmc_0: mmc@12200000 {
@@ -541,6 +543,8 @@
 	fimd: fimd@14400000 {
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
+		iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
+		iommu-names = "m0", "m1";
 	};
 
 	adc: adc@12D10000 {
@@ -726,6 +730,7 @@
 		interrupts = <0 94 0>;
 		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "sclk_hdmi";
+		iommus = <&sysmmu_tv>;
 	};
 
 	gsc_0: video-scaler@13e00000 {
@@ -735,6 +740,7 @@
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 		power-domains = <&gsc_pd>;
+		iommus = <&sysmmu_gscl0>;
 	};
 
 	gsc_1: video-scaler@13e10000 {
@@ -744,6 +750,7 @@
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 		power-domains = <&gsc_pd>;
+		iommus = <&sysmmu_gscl1>;
 	};
 
 	pmu_system_controller: system-controller@10040000 {
@@ -907,4 +914,175 @@
 		samsung,sysreg-phandle = <&sysreg_system_controller>;
 		samsung,pmureg-phandle = <&pmu_system_controller>;
 	};
+
+	sysmmu_g2dr: sysmmu@0x10A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_g2dw: sysmmu@0x10A70000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A70000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu@0x14650000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14650000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <7 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gscl0: sysmmu@0x13E80000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E80000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+		power-domains = <&gsc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gscl1: sysmmu@0x13E90000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E90000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+		power-domains = <&gsc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler0r: sysmmu@0x12880000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12880000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler1r: sysmmu@0x12890000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12890000 0x1000>;
+		interrupts = <0 186 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler2r: sysmmu@0x128A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128A0000 0x1000>;
+		interrupts = <0 188 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler0w: sysmmu@0x128C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <27 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler1w: sysmmu@0x128D0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128D0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler2w: sysmmu@0x128E0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128E0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <19 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg: sysmmu@0x11F10000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F10000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg2: sysmmu@0x11F20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F20000 0x1000>;
+		interrupts = <0 169 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_l: sysmmu@0x11200000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11200000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <6 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		power-domains = <&mfc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu@0x11210000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11210000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <8 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		power-domains = <&mfc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1_0: sysmmu@0x14640000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14640000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1_1: sysmmu@0x14680000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14680000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+		#iommu-cells = <0>;
+	};
 };
-- 
1.9.2

[PATCH v4 05/18] ARM: dts: exynos5420: add sysmmu nodes

[Marek Szyprowski]

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos5420.dtsi | 178 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 178 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 03ef2481c640..6d8e73bcfff8 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -179,6 +179,8 @@
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 		power-domains = <&mfc_pd>;
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 	};
 
 	mmc_0: mmc at 12200000 {
@@ -541,6 +543,8 @@
 	fimd: fimd at 14400000 {
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
+		iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
+		iommu-names = "m0", "m1";
 	};
 
 	adc: adc at 12D10000 {
@@ -726,6 +730,7 @@
 		interrupts = <0 94 0>;
 		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "sclk_hdmi";
+		iommus = <&sysmmu_tv>;
 	};
 
 	gsc_0: video-scaler at 13e00000 {
@@ -735,6 +740,7 @@
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 		power-domains = <&gsc_pd>;
+		iommus = <&sysmmu_gscl0>;
 	};
 
 	gsc_1: video-scaler at 13e10000 {
@@ -744,6 +750,7 @@
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 		power-domains = <&gsc_pd>;
+		iommus = <&sysmmu_gscl1>;
 	};
 
 	pmu_system_controller: system-controller at 10040000 {
@@ -907,4 +914,175 @@
 		samsung,sysreg-phandle = <&sysreg_system_controller>;
 		samsung,pmureg-phandle = <&pmu_system_controller>;
 	};
+
+	sysmmu_g2dr: sysmmu at 0x10A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_g2dw: sysmmu at 0x10A70000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A70000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu at 0x14650000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14650000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <7 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gscl0: sysmmu at 0x13E80000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E80000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+		power-domains = <&gsc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gscl1: sysmmu at 0x13E90000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E90000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+		power-domains = <&gsc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler0r: sysmmu at 0x12880000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12880000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler1r: sysmmu at 0x12890000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12890000 0x1000>;
+		interrupts = <0 186 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler2r: sysmmu at 0x128A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128A0000 0x1000>;
+		interrupts = <0 188 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler0w: sysmmu at 0x128C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <27 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler1w: sysmmu at 0x128D0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128D0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler2w: sysmmu at 0x128E0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128E0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <19 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg: sysmmu at 0x11F10000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F10000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg2: sysmmu at 0x11F20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F20000 0x1000>;
+		interrupts = <0 169 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_l: sysmmu at 0x11200000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11200000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <6 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		power-domains = <&mfc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu at 0x11210000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11210000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <8 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		power-domains = <&mfc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1_0: sysmmu at 0x14640000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14640000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1_1: sysmmu at 0x14680000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14680000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+		#iommu-cells = <0>;
+	};
 };
-- 
1.9.2

[PATCH v4 06/18] iommu: exynos: don't read version register on every tlb operation

[Marek Szyprowski]

This patch removes reading of REG_MMU_VERSION register on every tlb
operation and caches SYSMMU version in driver's internal data.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 7ce52737c7a1..b6c86121cdcc 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -212,6 +212,7 @@ struct sysmmu_drvdata {
 	spinlock_t lock;
 	struct iommu_domain *domain;
 	phys_addr_t pgtable;
+	int version;
 };
 
 static bool set_sysmmu_active(struct sysmmu_drvdata *data)
@@ -238,11 +239,6 @@ static void sysmmu_unblock(void __iomem *sfrbase)
 	__raw_writel(CTRL_ENABLE, sfrbase + REG_MMU_CTRL);
 }
 
-static unsigned int __raw_sysmmu_version(struct sysmmu_drvdata *data)
-{
-	return MMU_RAW_VER(__raw_readl(data->sfrbase + REG_MMU_VERSION));
-}
-
 static bool sysmmu_block(void __iomem *sfrbase)
 {
 	int i = 120;
@@ -402,7 +398,7 @@ static void __sysmmu_init_config(struct sysmmu_drvdata *data)
 	unsigned int cfg = CFG_LRU | CFG_QOS(15);
 	unsigned int ver;
 
-	ver = __raw_sysmmu_version(data);
+	ver = MMU_RAW_VER(__raw_readl(data->sfrbase + REG_MMU_VERSION));
 	if (MMU_MAJ_VER(ver) == 3) {
 		if (MMU_MIN_VER(ver) >= 2) {
 			cfg |= CFG_FLPDCACHE;
@@ -416,6 +412,7 @@ static void __sysmmu_init_config(struct sysmmu_drvdata *data)
 	}
 
 	__raw_writel(cfg, data->sfrbase + REG_MMU_CFG);
+	data->version = ver;
 }
 
 static void __sysmmu_enable_nocount(struct sysmmu_drvdata *data)
@@ -525,7 +522,7 @@ static bool exynos_sysmmu_disable(struct device *dev)
 static void __sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
 					      sysmmu_iova_t iova)
 {
-	if (__raw_sysmmu_version(data) == MAKE_MMU_VER(3, 3))
+	if (data->version == MAKE_MMU_VER(3, 3))
 		__raw_writel(iova | 0x1, data->sfrbase + REG_MMU_FLUSH_ENTRY);
 }
 
@@ -574,7 +571,7 @@ static void sysmmu_tlb_invalidate_entry(struct device *dev, sysmmu_iova_t iova,
 		 * 1MB page can be cached in one of all sets.
 		 * 64KB page can be one of 16 consecutive sets.
 		 */
-		if (MMU_MAJ_VER(__raw_sysmmu_version(data)) == 2)
+		if (MMU_MAJ_VER(data->version) == 2)
 			num_inv = min_t(unsigned int, size / PAGE_SIZE, 64);
 
 		if (sysmmu_block(data->sfrbase)) {
-- 
1.9.2

[PATCH v4 06/18] iommu: exynos: don't read version register on every tlb operation

[Marek Szyprowski]

This patch removes reading of REG_MMU_VERSION register on every tlb
operation and caches SYSMMU version in driver's internal data.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 7ce52737c7a1..b6c86121cdcc 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -212,6 +212,7 @@ struct sysmmu_drvdata {
 	spinlock_t lock;
 	struct iommu_domain *domain;
 	phys_addr_t pgtable;
+	int version;
 };
 
 static bool set_sysmmu_active(struct sysmmu_drvdata *data)
@@ -238,11 +239,6 @@ static void sysmmu_unblock(void __iomem *sfrbase)
 	__raw_writel(CTRL_ENABLE, sfrbase + REG_MMU_CTRL);
 }
 
-static unsigned int __raw_sysmmu_version(struct sysmmu_drvdata *data)
-{
-	return MMU_RAW_VER(__raw_readl(data->sfrbase + REG_MMU_VERSION));
-}
-
 static bool sysmmu_block(void __iomem *sfrbase)
 {
 	int i = 120;
@@ -402,7 +398,7 @@ static void __sysmmu_init_config(struct sysmmu_drvdata *data)
 	unsigned int cfg = CFG_LRU | CFG_QOS(15);
 	unsigned int ver;
 
-	ver = __raw_sysmmu_version(data);
+	ver = MMU_RAW_VER(__raw_readl(data->sfrbase + REG_MMU_VERSION));
 	if (MMU_MAJ_VER(ver) == 3) {
 		if (MMU_MIN_VER(ver) >= 2) {
 			cfg |= CFG_FLPDCACHE;
@@ -416,6 +412,7 @@ static void __sysmmu_init_config(struct sysmmu_drvdata *data)
 	}
 
 	__raw_writel(cfg, data->sfrbase + REG_MMU_CFG);
+	data->version = ver;
 }
 
 static void __sysmmu_enable_nocount(struct sysmmu_drvdata *data)
@@ -525,7 +522,7 @@ static bool exynos_sysmmu_disable(struct device *dev)
 static void __sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
 					      sysmmu_iova_t iova)
 {
-	if (__raw_sysmmu_version(data) == MAKE_MMU_VER(3, 3))
+	if (data->version == MAKE_MMU_VER(3, 3))
 		__raw_writel(iova | 0x1, data->sfrbase + REG_MMU_FLUSH_ENTRY);
 }
 
@@ -574,7 +571,7 @@ static void sysmmu_tlb_invalidate_entry(struct device *dev, sysmmu_iova_t iova,
 		 * 1MB page can be cached in one of all sets.
 		 * 64KB page can be one of 16 consecutive sets.
 		 */
-		if (MMU_MAJ_VER(__raw_sysmmu_version(data)) == 2)
+		if (MMU_MAJ_VER(data->version) == 2)
 			num_inv = min_t(unsigned int, size / PAGE_SIZE, 64);
 
 		if (sysmmu_block(data->sfrbase)) {
-- 
1.9.2

[PATCH v4 07/18] iommu: exynos: remove unused functions

[Marek Szyprowski]

This patch removes two unneeded functions, which are not a part of
generic IOMMU API and were never used by any other driver.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 31 -------------------------------
 1 file changed, 31 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index b6c86121cdcc..3c824114771a 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -490,13 +490,6 @@ static int __exynos_sysmmu_enable(struct device *dev, phys_addr_t pgtable,
 	return ret;
 }
 
-int exynos_sysmmu_enable(struct device *dev, phys_addr_t pgtable)
-{
-	BUG_ON(!memblock_is_memory(pgtable));
-
-	return __exynos_sysmmu_enable(dev, pgtable, NULL);
-}
-
 static bool exynos_sysmmu_disable(struct device *dev)
 {
 	unsigned long flags;
@@ -588,30 +581,6 @@ static void sysmmu_tlb_invalidate_entry(struct device *dev, sysmmu_iova_t iova,
 	spin_unlock_irqrestore(&data->lock, flags);
 }
 
-void exynos_sysmmu_tlb_invalidate(struct device *dev)
-{
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	unsigned long flags;
-	struct sysmmu_drvdata *data;
-
-	data = dev_get_drvdata(owner->sysmmu);
-
-	spin_lock_irqsave(&data->lock, flags);
-	if (is_sysmmu_active(data)) {
-		if (!IS_ERR(data->clk_master))
-			clk_enable(data->clk_master);
-		if (sysmmu_block(data->sfrbase)) {
-			__sysmmu_tlb_invalidate(data->sfrbase);
-			sysmmu_unblock(data->sfrbase);
-		}
-		if (!IS_ERR(data->clk_master))
-			clk_disable(data->clk_master);
-	} else {
-		dev_dbg(dev, "disabled. Skipping TLB invalidation\n");
-	}
-	spin_unlock_irqrestore(&data->lock, flags);
-}
-
 static int __init exynos_sysmmu_probe(struct platform_device *pdev)
 {
 	int irq, ret;
-- 
1.9.2

[PATCH v4 07/18] iommu: exynos: remove unused functions

[Marek Szyprowski]

This patch removes two unneeded functions, which are not a part of
generic IOMMU API and were never used by any other driver.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 31 -------------------------------
 1 file changed, 31 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index b6c86121cdcc..3c824114771a 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -490,13 +490,6 @@ static int __exynos_sysmmu_enable(struct device *dev, phys_addr_t pgtable,
 	return ret;
 }
 
-int exynos_sysmmu_enable(struct device *dev, phys_addr_t pgtable)
-{
-	BUG_ON(!memblock_is_memory(pgtable));
-
-	return __exynos_sysmmu_enable(dev, pgtable, NULL);
-}
-
 static bool exynos_sysmmu_disable(struct device *dev)
 {
 	unsigned long flags;
@@ -588,30 +581,6 @@ static void sysmmu_tlb_invalidate_entry(struct device *dev, sysmmu_iova_t iova,
 	spin_unlock_irqrestore(&data->lock, flags);
 }
 
-void exynos_sysmmu_tlb_invalidate(struct device *dev)
-{
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	unsigned long flags;
-	struct sysmmu_drvdata *data;
-
-	data = dev_get_drvdata(owner->sysmmu);
-
-	spin_lock_irqsave(&data->lock, flags);
-	if (is_sysmmu_active(data)) {
-		if (!IS_ERR(data->clk_master))
-			clk_enable(data->clk_master);
-		if (sysmmu_block(data->sfrbase)) {
-			__sysmmu_tlb_invalidate(data->sfrbase);
-			sysmmu_unblock(data->sfrbase);
-		}
-		if (!IS_ERR(data->clk_master))
-			clk_disable(data->clk_master);
-	} else {
-		dev_dbg(dev, "disabled. Skipping TLB invalidation\n");
-	}
-	spin_unlock_irqrestore(&data->lock, flags);
-}
-
 static int __init exynos_sysmmu_probe(struct platform_device *pdev)
 {
 	int irq, ret;
-- 
1.9.2

[PATCH v4 08/18] iommu: exynos: remove useless spinlock

[Marek Szyprowski]

This patch removes useless spinlocks and other unused members from
struct exynos_iommu_owner. There is no point is protecting this
structure by spinlock because content of this structure doesn't change
and other structures have their own spinlocks.

Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 drivers/iommu/exynos-iommu.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 3c824114771a..aa8c4b0ae2a1 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -189,9 +189,6 @@ struct exynos_iommu_owner {
 	struct list_head client; /* entry of exynos_iommu_domain.clients */
 	struct device *dev;
 	struct device *sysmmu;
-	struct iommu_domain *domain;
-	void *vmm_data;         /* IO virtual memory manager's data */
-	spinlock_t lock;        /* Lock to preserve consistency of System MMU */
 };
 
 struct exynos_iommu_domain {
@@ -477,16 +474,12 @@ static int __exynos_sysmmu_enable(struct device *dev, phys_addr_t pgtable,
 
 	BUG_ON(!has_sysmmu(dev));
 
-	spin_lock_irqsave(&owner->lock, flags);
-
 	data = dev_get_drvdata(owner->sysmmu);
 
 	ret = __sysmmu_enable(data, pgtable, domain);
 	if (ret >= 0)
 		data->master = dev;
 
-	spin_unlock_irqrestore(&owner->lock, flags);
-
 	return ret;
 }
 
@@ -499,16 +492,12 @@ static bool exynos_sysmmu_disable(struct device *dev)
 
 	BUG_ON(!has_sysmmu(dev));
 
-	spin_lock_irqsave(&owner->lock, flags);
-
 	data = dev_get_drvdata(owner->sysmmu);
 
 	disabled = __sysmmu_disable(data);
 	if (disabled)
 		data->master = NULL;
 
-	spin_unlock_irqrestore(&owner->lock, flags);
-
 	return disabled;
 }
 
-- 
1.9.2

[PATCH v4 08/18] iommu: exynos: remove useless spinlock

[Marek Szyprowski]

This patch removes useless spinlocks and other unused members from
struct exynos_iommu_owner. There is no point is protecting this
structure by spinlock because content of this structure doesn't change
and other structures have their own spinlocks.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 3c824114771a..aa8c4b0ae2a1 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -189,9 +189,6 @@ struct exynos_iommu_owner {
 	struct list_head client; /* entry of exynos_iommu_domain.clients */
 	struct device *dev;
 	struct device *sysmmu;
-	struct iommu_domain *domain;
-	void *vmm_data;         /* IO virtual memory manager's data */
-	spinlock_t lock;        /* Lock to preserve consistency of System MMU */
 };
 
 struct exynos_iommu_domain {
@@ -477,16 +474,12 @@ static int __exynos_sysmmu_enable(struct device *dev, phys_addr_t pgtable,
 
 	BUG_ON(!has_sysmmu(dev));
 
-	spin_lock_irqsave(&owner->lock, flags);
-
 	data = dev_get_drvdata(owner->sysmmu);
 
 	ret = __sysmmu_enable(data, pgtable, domain);
 	if (ret >= 0)
 		data->master = dev;
 
-	spin_unlock_irqrestore(&owner->lock, flags);
-
 	return ret;
 }
 
@@ -499,16 +492,12 @@ static bool exynos_sysmmu_disable(struct device *dev)
 
 	BUG_ON(!has_sysmmu(dev));
 
-	spin_lock_irqsave(&owner->lock, flags);
-
 	data = dev_get_drvdata(owner->sysmmu);
 
 	disabled = __sysmmu_disable(data);
 	if (disabled)
 		data->master = NULL;
 
-	spin_unlock_irqrestore(&owner->lock, flags);
-
 	return disabled;
 }
 
-- 
1.9.2

[PATCH v4 09/18] iommu: exynos: refactor function parameters to simplify code

[Marek Szyprowski]

This patch simplifies the code by:
- refactoring function parameters from struct device pointer to direct pointer
  to struct sysmmu drvdata
- moving list_head enteries from struct exynos_iommu_owner directly to struct
  sysmmu_drvdata

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 93 ++++++++++++++++++++++----------------------
 1 file changed, 46 insertions(+), 47 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index aa8c4b0ae2a1..862261fe097b 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -186,8 +186,6 @@ static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
 
 /* attached to dev.archdata.iommu of the master device */
 struct exynos_iommu_owner {
-	struct list_head client; /* entry of exynos_iommu_domain.clients */
-	struct device *dev;
 	struct device *sysmmu;
 };
 
@@ -208,6 +206,7 @@ struct sysmmu_drvdata {
 	int activations;
 	spinlock_t lock;
 	struct iommu_domain *domain;
+	struct list_head domain_node;
 	phys_addr_t pgtable;
 	int version;
 };
@@ -508,12 +507,10 @@ static void __sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
 		__raw_writel(iova | 0x1, data->sfrbase + REG_MMU_FLUSH_ENTRY);
 }
 
-static void sysmmu_tlb_invalidate_flpdcache(struct device *dev,
+static void sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
 					    sysmmu_iova_t iova)
 {
 	unsigned long flags;
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	struct sysmmu_drvdata *data = dev_get_drvdata(owner->sysmmu);
 
 	if (!IS_ERR(data->clk_master))
 		clk_enable(data->clk_master);
@@ -527,14 +524,10 @@ static void sysmmu_tlb_invalidate_flpdcache(struct device *dev,
 		clk_disable(data->clk_master);
 }
 
-static void sysmmu_tlb_invalidate_entry(struct device *dev, sysmmu_iova_t iova,
-					size_t size)
+static void sysmmu_tlb_invalidate_entry(struct sysmmu_drvdata *data,
+					sysmmu_iova_t iova, size_t size)
 {
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
 	unsigned long flags;
-	struct sysmmu_drvdata *data;
-
-	data = dev_get_drvdata(owner->sysmmu);
 
 	spin_lock_irqsave(&data->lock, flags);
 	if (is_sysmmu_active(data)) {
@@ -564,8 +557,8 @@ static void sysmmu_tlb_invalidate_entry(struct device *dev, sysmmu_iova_t iova,
 		if (!IS_ERR(data->clk_master))
 			clk_disable(data->clk_master);
 	} else {
-		dev_dbg(dev, "disabled. Skipping TLB invalidation @ %#x\n",
-			iova);
+		dev_dbg(data->master,
+			"disabled. Skipping TLB invalidation @ %#x\n", iova);
 	}
 	spin_unlock_irqrestore(&data->lock, flags);
 }
@@ -703,7 +696,7 @@ err_pgtable:
 static void exynos_iommu_domain_destroy(struct iommu_domain *domain)
 {
 	struct exynos_iommu_domain *priv = domain->priv;
-	struct exynos_iommu_owner *owner;
+	struct sysmmu_drvdata *data;
 	unsigned long flags;
 	int i;
 
@@ -711,14 +704,12 @@ static void exynos_iommu_domain_destroy(struct iommu_domain *domain)
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	list_for_each_entry(owner, &priv->clients, client) {
-		while (!exynos_sysmmu_disable(owner->dev))
-			; /* until System MMU is actually disabled */
+	list_for_each_entry(data, &priv->clients, domain_node) {
+		if (__sysmmu_disable(data))
+			data->master = NULL;
+		list_del_init(&data->domain_node);
 	}
 
-	while (!list_empty(&priv->clients))
-		list_del_init(priv->clients.next);
-
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	for (i = 0; i < NUM_LV1ENTRIES; i++)
@@ -737,20 +728,26 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 {
 	struct exynos_iommu_owner *owner = dev->archdata.iommu;
 	struct exynos_iommu_domain *priv = domain->priv;
+	struct sysmmu_drvdata *data;
 	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
 	unsigned long flags;
-	int ret;
+	int ret = -ENODEV;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	if (!has_sysmmu(dev))
+		return -ENODEV;
 
-	ret = __exynos_sysmmu_enable(dev, pagetable, domain);
-	if (ret == 0) {
-		list_add_tail(&owner->client, &priv->clients);
-		owner->domain = domain;
+	data = dev_get_drvdata(owner->sysmmu);
+	if (data) {
+		ret = __sysmmu_enable(data, pagetable, domain);
+		if (ret >= 0) {
+			data->master = dev;
+
+			spin_lock_irqsave(&priv->lock, flags);
+			list_add_tail(&data->domain_node, &priv->clients);
+			spin_unlock_irqrestore(&priv->lock, flags);
+		}
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	if (ret < 0) {
 		dev_err(dev, "%s: Failed to attach IOMMU with pgtable %pa\n",
 					__func__, &pagetable);
@@ -766,26 +763,29 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 static void exynos_iommu_detach_device(struct iommu_domain *domain,
 				    struct device *dev)
 {
-	struct exynos_iommu_owner *owner;
 	struct exynos_iommu_domain *priv = domain->priv;
 	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
+	struct sysmmu_drvdata *data;
 	unsigned long flags;
+	int found = 0;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	if (!has_sysmmu(dev))
+		return;
 
-	list_for_each_entry(owner, &priv->clients, client) {
-		if (owner == dev->archdata.iommu) {
-			if (exynos_sysmmu_disable(dev)) {
-				list_del_init(&owner->client);
-				owner->domain = NULL;
+	spin_lock_irqsave(&priv->lock, flags);
+	list_for_each_entry(data, &priv->clients, domain_node) {
+		if (data->master == dev) {
+			if (__sysmmu_disable(data)) {
+				data->master = NULL;
+				list_del_init(&data->domain_node);
 			}
+			found = true;
 			break;
 		}
 	}
-
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	if (owner == dev->archdata.iommu)
+	if (found)
 		dev_dbg(dev, "%s: Detached IOMMU with pgtable %pa\n",
 					__func__, &pagetable);
 	else
@@ -832,12 +832,11 @@ static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *priv,
 		 * not currently mapped.
 		 */
 		if (need_flush_flpd_cache) {
-			struct exynos_iommu_owner *owner;
+			struct sysmmu_drvdata *data;
 
 			spin_lock(&priv->lock);
-			list_for_each_entry(owner, &priv->clients, client)
-				sysmmu_tlb_invalidate_flpdcache(
-							owner->dev, iova);
+			list_for_each_entry(data, &priv->clients, domain_node)
+				sysmmu_tlb_invalidate_flpdcache(data, iova);
 			spin_unlock(&priv->lock);
 		}
 	}
@@ -872,13 +871,13 @@ static int lv1set_section(struct exynos_iommu_domain *priv,
 
 	spin_lock(&priv->lock);
 	if (lv1ent_page_zero(sent)) {
-		struct exynos_iommu_owner *owner;
+		struct sysmmu_drvdata *data;
 		/*
 		 * Flushing FLPD cache in System MMU v3.3 that may cache a FLPD
 		 * entry by speculative prefetch of SLPD which has no mapping.
 		 */
-		list_for_each_entry(owner, &priv->clients, client)
-			sysmmu_tlb_invalidate_flpdcache(owner->dev, iova);
+		list_for_each_entry(data, &priv->clients, domain_node)
+			sysmmu_tlb_invalidate_flpdcache(data, iova);
 	}
 	spin_unlock(&priv->lock);
 
@@ -983,13 +982,13 @@ static int exynos_iommu_map(struct iommu_domain *domain, unsigned long l_iova,
 static void exynos_iommu_tlb_invalidate_entry(struct exynos_iommu_domain *priv,
 						sysmmu_iova_t iova, size_t size)
 {
-	struct exynos_iommu_owner *owner;
+	struct sysmmu_drvdata *data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	list_for_each_entry(owner, &priv->clients, client)
-		sysmmu_tlb_invalidate_entry(owner->dev, iova, size);
+	list_for_each_entry(data, &priv->clients, domain_node)
+		sysmmu_tlb_invalidate_entry(data, iova, size);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
-- 
1.9.2

[PATCH v4 09/18] iommu: exynos: refactor function parameters to simplify code

[Marek Szyprowski]

This patch simplifies the code by:
- refactoring function parameters from struct device pointer to direct pointer
  to struct sysmmu drvdata
- moving list_head enteries from struct exynos_iommu_owner directly to struct
  sysmmu_drvdata

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 93 ++++++++++++++++++++++----------------------
 1 file changed, 46 insertions(+), 47 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index aa8c4b0ae2a1..862261fe097b 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -186,8 +186,6 @@ static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
 
 /* attached to dev.archdata.iommu of the master device */
 struct exynos_iommu_owner {
-	struct list_head client; /* entry of exynos_iommu_domain.clients */
-	struct device *dev;
 	struct device *sysmmu;
 };
 
@@ -208,6 +206,7 @@ struct sysmmu_drvdata {
 	int activations;
 	spinlock_t lock;
 	struct iommu_domain *domain;
+	struct list_head domain_node;
 	phys_addr_t pgtable;
 	int version;
 };
@@ -508,12 +507,10 @@ static void __sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
 		__raw_writel(iova | 0x1, data->sfrbase + REG_MMU_FLUSH_ENTRY);
 }
 
-static void sysmmu_tlb_invalidate_flpdcache(struct device *dev,
+static void sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
 					    sysmmu_iova_t iova)
 {
 	unsigned long flags;
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	struct sysmmu_drvdata *data = dev_get_drvdata(owner->sysmmu);
 
 	if (!IS_ERR(data->clk_master))
 		clk_enable(data->clk_master);
@@ -527,14 +524,10 @@ static void sysmmu_tlb_invalidate_flpdcache(struct device *dev,
 		clk_disable(data->clk_master);
 }
 
-static void sysmmu_tlb_invalidate_entry(struct device *dev, sysmmu_iova_t iova,
-					size_t size)
+static void sysmmu_tlb_invalidate_entry(struct sysmmu_drvdata *data,
+					sysmmu_iova_t iova, size_t size)
 {
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
 	unsigned long flags;
-	struct sysmmu_drvdata *data;
-
-	data = dev_get_drvdata(owner->sysmmu);
 
 	spin_lock_irqsave(&data->lock, flags);
 	if (is_sysmmu_active(data)) {
@@ -564,8 +557,8 @@ static void sysmmu_tlb_invalidate_entry(struct device *dev, sysmmu_iova_t iova,
 		if (!IS_ERR(data->clk_master))
 			clk_disable(data->clk_master);
 	} else {
-		dev_dbg(dev, "disabled. Skipping TLB invalidation @ %#x\n",
-			iova);
+		dev_dbg(data->master,
+			"disabled. Skipping TLB invalidation @ %#x\n", iova);
 	}
 	spin_unlock_irqrestore(&data->lock, flags);
 }
@@ -703,7 +696,7 @@ err_pgtable:
 static void exynos_iommu_domain_destroy(struct iommu_domain *domain)
 {
 	struct exynos_iommu_domain *priv = domain->priv;
-	struct exynos_iommu_owner *owner;
+	struct sysmmu_drvdata *data;
 	unsigned long flags;
 	int i;
 
@@ -711,14 +704,12 @@ static void exynos_iommu_domain_destroy(struct iommu_domain *domain)
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	list_for_each_entry(owner, &priv->clients, client) {
-		while (!exynos_sysmmu_disable(owner->dev))
-			; /* until System MMU is actually disabled */
+	list_for_each_entry(data, &priv->clients, domain_node) {
+		if (__sysmmu_disable(data))
+			data->master = NULL;
+		list_del_init(&data->domain_node);
 	}
 
-	while (!list_empty(&priv->clients))
-		list_del_init(priv->clients.next);
-
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	for (i = 0; i < NUM_LV1ENTRIES; i++)
@@ -737,20 +728,26 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 {
 	struct exynos_iommu_owner *owner = dev->archdata.iommu;
 	struct exynos_iommu_domain *priv = domain->priv;
+	struct sysmmu_drvdata *data;
 	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
 	unsigned long flags;
-	int ret;
+	int ret = -ENODEV;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	if (!has_sysmmu(dev))
+		return -ENODEV;
 
-	ret = __exynos_sysmmu_enable(dev, pagetable, domain);
-	if (ret == 0) {
-		list_add_tail(&owner->client, &priv->clients);
-		owner->domain = domain;
+	data = dev_get_drvdata(owner->sysmmu);
+	if (data) {
+		ret = __sysmmu_enable(data, pagetable, domain);
+		if (ret >= 0) {
+			data->master = dev;
+
+			spin_lock_irqsave(&priv->lock, flags);
+			list_add_tail(&data->domain_node, &priv->clients);
+			spin_unlock_irqrestore(&priv->lock, flags);
+		}
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	if (ret < 0) {
 		dev_err(dev, "%s: Failed to attach IOMMU with pgtable %pa\n",
 					__func__, &pagetable);
@@ -766,26 +763,29 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 static void exynos_iommu_detach_device(struct iommu_domain *domain,
 				    struct device *dev)
 {
-	struct exynos_iommu_owner *owner;
 	struct exynos_iommu_domain *priv = domain->priv;
 	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
+	struct sysmmu_drvdata *data;
 	unsigned long flags;
+	int found = 0;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	if (!has_sysmmu(dev))
+		return;
 
-	list_for_each_entry(owner, &priv->clients, client) {
-		if (owner == dev->archdata.iommu) {
-			if (exynos_sysmmu_disable(dev)) {
-				list_del_init(&owner->client);
-				owner->domain = NULL;
+	spin_lock_irqsave(&priv->lock, flags);
+	list_for_each_entry(data, &priv->clients, domain_node) {
+		if (data->master == dev) {
+			if (__sysmmu_disable(data)) {
+				data->master = NULL;
+				list_del_init(&data->domain_node);
 			}
+			found = true;
 			break;
 		}
 	}
-
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	if (owner == dev->archdata.iommu)
+	if (found)
 		dev_dbg(dev, "%s: Detached IOMMU with pgtable %pa\n",
 					__func__, &pagetable);
 	else
@@ -832,12 +832,11 @@ static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *priv,
 		 * not currently mapped.
 		 */
 		if (need_flush_flpd_cache) {
-			struct exynos_iommu_owner *owner;
+			struct sysmmu_drvdata *data;
 
 			spin_lock(&priv->lock);
-			list_for_each_entry(owner, &priv->clients, client)
-				sysmmu_tlb_invalidate_flpdcache(
-							owner->dev, iova);
+			list_for_each_entry(data, &priv->clients, domain_node)
+				sysmmu_tlb_invalidate_flpdcache(data, iova);
 			spin_unlock(&priv->lock);
 		}
 	}
@@ -872,13 +871,13 @@ static int lv1set_section(struct exynos_iommu_domain *priv,
 
 	spin_lock(&priv->lock);
 	if (lv1ent_page_zero(sent)) {
-		struct exynos_iommu_owner *owner;
+		struct sysmmu_drvdata *data;
 		/*
 		 * Flushing FLPD cache in System MMU v3.3 that may cache a FLPD
 		 * entry by speculative prefetch of SLPD which has no mapping.
 		 */
-		list_for_each_entry(owner, &priv->clients, client)
-			sysmmu_tlb_invalidate_flpdcache(owner->dev, iova);
+		list_for_each_entry(data, &priv->clients, domain_node)
+			sysmmu_tlb_invalidate_flpdcache(data, iova);
 	}
 	spin_unlock(&priv->lock);
 
@@ -983,13 +982,13 @@ static int exynos_iommu_map(struct iommu_domain *domain, unsigned long l_iova,
 static void exynos_iommu_tlb_invalidate_entry(struct exynos_iommu_domain *priv,
 						sysmmu_iova_t iova, size_t size)
 {
-	struct exynos_iommu_owner *owner;
+	struct sysmmu_drvdata *data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	list_for_each_entry(owner, &priv->clients, client)
-		sysmmu_tlb_invalidate_entry(owner->dev, iova, size);
+	list_for_each_entry(data, &priv->clients, domain_node)
+		sysmmu_tlb_invalidate_entry(data, iova, size);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
-- 
1.9.2

[PATCH v4 10/18] iommu: exynos: remove unused functions, part 2

[Marek Szyprowski]

After refactoring functions to use pointer to struct sysmmu_drvdata
directly, some functions became useless and thus never used, so remove
them completely.

Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 drivers/iommu/exynos-iommu.c | 43 -------------------------------------------
 1 file changed, 43 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 862261fe097b..e62cb96a742c 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -457,49 +457,6 @@ static int __sysmmu_enable(struct sysmmu_drvdata *data,
 	return ret;
 }
 
-/* __exynos_sysmmu_enable: Enables System MMU
- *
- * returns -error if an error occurred and System MMU is not enabled,
- * 0 if the System MMU has been just enabled and 1 if System MMU was already
- * enabled before.
- */
-static int __exynos_sysmmu_enable(struct device *dev, phys_addr_t pgtable,
-				  struct iommu_domain *domain)
-{
-	int ret = 0;
-	unsigned long flags;
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	struct sysmmu_drvdata *data;
-
-	BUG_ON(!has_sysmmu(dev));
-
-	data = dev_get_drvdata(owner->sysmmu);
-
-	ret = __sysmmu_enable(data, pgtable, domain);
-	if (ret >= 0)
-		data->master = dev;
-
-	return ret;
-}
-
-static bool exynos_sysmmu_disable(struct device *dev)
-{
-	unsigned long flags;
-	bool disabled = true;
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	struct sysmmu_drvdata *data;
-
-	BUG_ON(!has_sysmmu(dev));
-
-	data = dev_get_drvdata(owner->sysmmu);
-
-	disabled = __sysmmu_disable(data);
-	if (disabled)
-		data->master = NULL;
-
-	return disabled;
-}
-
 static void __sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
 					      sysmmu_iova_t iova)
 {
-- 
1.9.2

[PATCH v4 10/18] iommu: exynos: remove unused functions, part 2

[Marek Szyprowski]

After refactoring functions to use pointer to struct sysmmu_drvdata
directly, some functions became useless and thus never used, so remove
them completely.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 43 -------------------------------------------
 1 file changed, 43 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 862261fe097b..e62cb96a742c 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -457,49 +457,6 @@ static int __sysmmu_enable(struct sysmmu_drvdata *data,
 	return ret;
 }
 
-/* __exynos_sysmmu_enable: Enables System MMU
- *
- * returns -error if an error occurred and System MMU is not enabled,
- * 0 if the System MMU has been just enabled and 1 if System MMU was already
- * enabled before.
- */
-static int __exynos_sysmmu_enable(struct device *dev, phys_addr_t pgtable,
-				  struct iommu_domain *domain)
-{
-	int ret = 0;
-	unsigned long flags;
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	struct sysmmu_drvdata *data;
-
-	BUG_ON(!has_sysmmu(dev));
-
-	data = dev_get_drvdata(owner->sysmmu);
-
-	ret = __sysmmu_enable(data, pgtable, domain);
-	if (ret >= 0)
-		data->master = dev;
-
-	return ret;
-}
-
-static bool exynos_sysmmu_disable(struct device *dev)
-{
-	unsigned long flags;
-	bool disabled = true;
-	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	struct sysmmu_drvdata *data;
-
-	BUG_ON(!has_sysmmu(dev));
-
-	data = dev_get_drvdata(owner->sysmmu);
-
-	disabled = __sysmmu_disable(data);
-	if (disabled)
-		data->master = NULL;
-
-	return disabled;
-}
-
 static void __sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
 					      sysmmu_iova_t iova)
 {
-- 
1.9.2

[PATCH v4 11/18] iommu: exynos: remove useless device_add/remove callbacks

[Marek Szyprowski]

The driver doesn't need to do anything important in device add/remove
callbacks, because initialization will be done from device-tree specific
callbacks added later. IOMMU groups created by current code were never
used.

Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 drivers/iommu/exynos-iommu.c | 28 ----------------------------
 1 file changed, 28 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index e62cb96a742c..e40e699423a6 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1055,32 +1055,6 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *domain,
 	return phys;
 }
 
-static int exynos_iommu_add_device(struct device *dev)
-{
-	struct iommu_group *group;
-	int ret;
-
-	group = iommu_group_get(dev);
-
-	if (!group) {
-		group = iommu_group_alloc();
-		if (IS_ERR(group)) {
-			dev_err(dev, "Failed to allocate IOMMU group\n");
-			return PTR_ERR(group);
-		}
-	}
-
-	ret = iommu_group_add_device(group, dev);
-	iommu_group_put(group);
-
-	return ret;
-}
-
-static void exynos_iommu_remove_device(struct device *dev)
-{
-	iommu_group_remove_device(dev);
-}
-
 static const struct iommu_ops exynos_iommu_ops = {
 	.domain_init = exynos_iommu_domain_init,
 	.domain_destroy = exynos_iommu_domain_destroy,
@@ -1090,8 +1064,6 @@ static const struct iommu_ops exynos_iommu_ops = {
 	.unmap = exynos_iommu_unmap,
 	.map_sg = default_iommu_map_sg,
 	.iova_to_phys = exynos_iommu_iova_to_phys,
-	.add_device = exynos_iommu_add_device,
-	.remove_device = exynos_iommu_remove_device,
 	.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
 };
 
-- 
1.9.2

[PATCH v4 11/18] iommu: exynos: remove useless device_add/remove callbacks

[Marek Szyprowski]

The driver doesn't need to do anything important in device add/remove
callbacks, because initialization will be done from device-tree specific
callbacks added later. IOMMU groups created by current code were never
used.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 28 ----------------------------
 1 file changed, 28 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index e62cb96a742c..e40e699423a6 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1055,32 +1055,6 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *domain,
 	return phys;
 }
 
-static int exynos_iommu_add_device(struct device *dev)
-{
-	struct iommu_group *group;
-	int ret;
-
-	group = iommu_group_get(dev);
-
-	if (!group) {
-		group = iommu_group_alloc();
-		if (IS_ERR(group)) {
-			dev_err(dev, "Failed to allocate IOMMU group\n");
-			return PTR_ERR(group);
-		}
-	}
-
-	ret = iommu_group_add_device(group, dev);
-	iommu_group_put(group);
-
-	return ret;
-}
-
-static void exynos_iommu_remove_device(struct device *dev)
-{
-	iommu_group_remove_device(dev);
-}
-
 static const struct iommu_ops exynos_iommu_ops = {
 	.domain_init = exynos_iommu_domain_init,
 	.domain_destroy = exynos_iommu_domain_destroy,
@@ -1090,8 +1064,6 @@ static const struct iommu_ops exynos_iommu_ops = {
 	.unmap = exynos_iommu_unmap,
 	.map_sg = default_iommu_map_sg,
 	.iova_to_phys = exynos_iommu_iova_to_phys,
-	.add_device = exynos_iommu_add_device,
-	.remove_device = exynos_iommu_remove_device,
 	.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
 };
 
-- 
1.9.2

[PATCH v4 12/18] iommu: exynos: add support for binding more than one sysmmu to master device

[Marek Szyprowski]

This patch adds support for assigning more than one SYSMMU controller to
the master device. This has been achieved simply by chaning the struct
device pointer in struct exynos_iommu_owner into the list of struct
sysmmu_drvdata of all controllers assigned to the given master device.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index e40e699423a6..c6cca44d7858 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -186,7 +186,7 @@ static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
 
 /* attached to dev.archdata.iommu of the master device */
 struct exynos_iommu_owner {
-	struct device *sysmmu;
+	struct list_head clients;
 };
 
 struct exynos_iommu_domain {
@@ -207,6 +207,7 @@ struct sysmmu_drvdata {
 	spinlock_t lock;
 	struct iommu_domain *domain;
 	struct list_head domain_node;
+	struct list_head owner_node;
 	phys_addr_t pgtable;
 	int version;
 };
@@ -693,8 +694,7 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 	if (!has_sysmmu(dev))
 		return -ENODEV;
 
-	data = dev_get_drvdata(owner->sysmmu);
-	if (data) {
+	list_for_each_entry(data, &owner->clients, owner_node) {
 		ret = __sysmmu_enable(data, pagetable, domain);
 		if (ret >= 0) {
 			data->master = dev;
@@ -722,7 +722,7 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 {
 	struct exynos_iommu_domain *priv = domain->priv;
 	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
-	struct sysmmu_drvdata *data;
+	struct sysmmu_drvdata *data, *next;
 	unsigned long flags;
 	int found = 0;
 
@@ -730,14 +730,13 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 		return;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	list_for_each_entry(data, &priv->clients, domain_node) {
+	list_for_each_entry_safe(data, next, &priv->clients, domain_node) {
 		if (data->master == dev) {
 			if (__sysmmu_disable(data)) {
 				data->master = NULL;
 				list_del_init(&data->domain_node);
 			}
 			found = true;
-			break;
 		}
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
-- 
1.9.2

[PATCH v4 12/18] iommu: exynos: add support for binding more than one sysmmu to master device

[Marek Szyprowski]

This patch adds support for assigning more than one SYSMMU controller to
the master device. This has been achieved simply by chaning the struct
device pointer in struct exynos_iommu_owner into the list of struct
sysmmu_drvdata of all controllers assigned to the given master device.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index e40e699423a6..c6cca44d7858 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -186,7 +186,7 @@ static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
 
 /* attached to dev.archdata.iommu of the master device */
 struct exynos_iommu_owner {
-	struct device *sysmmu;
+	struct list_head clients;
 };
 
 struct exynos_iommu_domain {
@@ -207,6 +207,7 @@ struct sysmmu_drvdata {
 	spinlock_t lock;
 	struct iommu_domain *domain;
 	struct list_head domain_node;
+	struct list_head owner_node;
 	phys_addr_t pgtable;
 	int version;
 };
@@ -693,8 +694,7 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 	if (!has_sysmmu(dev))
 		return -ENODEV;
 
-	data = dev_get_drvdata(owner->sysmmu);
-	if (data) {
+	list_for_each_entry(data, &owner->clients, owner_node) {
 		ret = __sysmmu_enable(data, pagetable, domain);
 		if (ret >= 0) {
 			data->master = dev;
@@ -722,7 +722,7 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 {
 	struct exynos_iommu_domain *priv = domain->priv;
 	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
-	struct sysmmu_drvdata *data;
+	struct sysmmu_drvdata *data, *next;
 	unsigned long flags;
 	int found = 0;
 
@@ -730,14 +730,13 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 		return;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	list_for_each_entry(data, &priv->clients, domain_node) {
+	list_for_each_entry_safe(data, next, &priv->clients, domain_node) {
 		if (data->master == dev) {
 			if (__sysmmu_disable(data)) {
 				data->master = NULL;
 				list_del_init(&data->domain_node);
 			}
 			found = true;
-			break;
 		}
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
-- 
1.9.2

[PATCH v4 13/18] iommu: exynos: add support for runtime_pm

[Marek Szyprowski]

This patch fixes support for runtime power management for SYSMMU
controllers, so they are enabled when master device is attached.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index c6cca44d7858..f8609f40ae59 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -695,6 +695,7 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 		return -ENODEV;
 
 	list_for_each_entry(data, &owner->clients, owner_node) {
+		pm_runtime_get_sync(data->sysmmu);
 		ret = __sysmmu_enable(data, pagetable, domain);
 		if (ret >= 0) {
 			data->master = dev;
@@ -736,6 +737,7 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 				data->master = NULL;
 				list_del_init(&data->domain_node);
 			}
+			pm_runtime_put(data->sysmmu);
 			found = true;
 		}
 	}
-- 
1.9.2

[PATCH v4 13/18] iommu: exynos: add support for runtime_pm

[Marek Szyprowski]

This patch fixes support for runtime power management for SYSMMU
controllers, so they are enabled when master device is attached.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index c6cca44d7858..f8609f40ae59 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -695,6 +695,7 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 		return -ENODEV;
 
 	list_for_each_entry(data, &owner->clients, owner_node) {
+		pm_runtime_get_sync(data->sysmmu);
 		ret = __sysmmu_enable(data, pagetable, domain);
 		if (ret >= 0) {
 			data->master = dev;
@@ -736,6 +737,7 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 				data->master = NULL;
 				list_del_init(&data->domain_node);
 			}
+			pm_runtime_put(data->sysmmu);
 			found = true;
 		}
 	}
-- 
1.9.2

[PATCH v4 14/18] iommu: exynos: rename variables to reflect their purpose

[Marek Szyprowski]

This patch renames some variables to make the code easier to understand.
'domain' is replaced by 'iommu_domain' (more generic entity) and really
meaning less 'priv' by 'domain' to reflect its purpose.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 191 ++++++++++++++++++++++---------------------
 1 file changed, 97 insertions(+), 94 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index f8609f40ae59..78a12ea78f1a 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -430,8 +430,8 @@ static void __sysmmu_enable_nocount(struct sysmmu_drvdata *data)
 		clk_disable(data->clk_master);
 }
 
-static int __sysmmu_enable(struct sysmmu_drvdata *data,
-			phys_addr_t pgtable, struct iommu_domain *domain)
+static int __sysmmu_enable(struct sysmmu_drvdata *data, phys_addr_t pgtable,
+			   struct iommu_domain *iommu_domain)
 {
 	int ret = 0;
 	unsigned long flags;
@@ -439,7 +439,7 @@ static int __sysmmu_enable(struct sysmmu_drvdata *data,
 	spin_lock_irqsave(&data->lock, flags);
 	if (set_sysmmu_active(data)) {
 		data->pgtable = pgtable;
-		data->domain = domain;
+		data->domain = iommu_domain;
 
 		__sysmmu_enable_nocount(data);
 
@@ -602,92 +602,93 @@ static inline void pgtable_flush(void *vastart, void *vaend)
 				virt_to_phys(vaend));
 }
 
-static int exynos_iommu_domain_init(struct iommu_domain *domain)
+static int exynos_iommu_domain_init(struct iommu_domain *iommu_domain)
 {
-	struct exynos_iommu_domain *priv;
+	struct exynos_iommu_domain *domain;
 	int i;
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv)
+	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
+	if (!domain)
 		return -ENOMEM;
 
-	priv->pgtable = (sysmmu_pte_t *)__get_free_pages(GFP_KERNEL, 2);
-	if (!priv->pgtable)
+	domain->pgtable = (sysmmu_pte_t *)__get_free_pages(GFP_KERNEL, 2);
+	if (!domain->pgtable)
 		goto err_pgtable;
 
-	priv->lv2entcnt = (short *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
-	if (!priv->lv2entcnt)
+	domain->lv2entcnt = (short *)
+			    __get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
+	if (!domain->lv2entcnt)
 		goto err_counter;
 
 	/* Workaround for System MMU v3.3 to prevent caching 1MiB mapping */
 	for (i = 0; i < NUM_LV1ENTRIES; i += 8) {
-		priv->pgtable[i + 0] = ZERO_LV2LINK;
-		priv->pgtable[i + 1] = ZERO_LV2LINK;
-		priv->pgtable[i + 2] = ZERO_LV2LINK;
-		priv->pgtable[i + 3] = ZERO_LV2LINK;
-		priv->pgtable[i + 4] = ZERO_LV2LINK;
-		priv->pgtable[i + 5] = ZERO_LV2LINK;
-		priv->pgtable[i + 6] = ZERO_LV2LINK;
-		priv->pgtable[i + 7] = ZERO_LV2LINK;
+		domain->pgtable[i + 0] = ZERO_LV2LINK;
+		domain->pgtable[i + 1] = ZERO_LV2LINK;
+		domain->pgtable[i + 2] = ZERO_LV2LINK;
+		domain->pgtable[i + 3] = ZERO_LV2LINK;
+		domain->pgtable[i + 4] = ZERO_LV2LINK;
+		domain->pgtable[i + 5] = ZERO_LV2LINK;
+		domain->pgtable[i + 6] = ZERO_LV2LINK;
+		domain->pgtable[i + 7] = ZERO_LV2LINK;
 	}
 
-	pgtable_flush(priv->pgtable, priv->pgtable + NUM_LV1ENTRIES);
+	pgtable_flush(domain->pgtable, domain->pgtable + NUM_LV1ENTRIES);
 
-	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->pgtablelock);
-	INIT_LIST_HEAD(&priv->clients);
+	spin_lock_init(&domain->lock);
+	spin_lock_init(&domain->pgtablelock);
+	INIT_LIST_HEAD(&domain->clients);
 
-	domain->geometry.aperture_start = 0;
-	domain->geometry.aperture_end   = ~0UL;
-	domain->geometry.force_aperture = true;
+	iommu_domain->geometry.aperture_start = 0;
+	iommu_domain->geometry.aperture_end   = ~0UL;
+	iommu_domain->geometry.force_aperture = true;
 
-	domain->priv = priv;
+	iommu_domain->priv = domain;
 	return 0;
 
 err_counter:
-	free_pages((unsigned long)priv->pgtable, 2);
+	free_pages((unsigned long)domain->pgtable, 2);
 err_pgtable:
-	kfree(priv);
+	kfree(domain);
 	return -ENOMEM;
 }
 
-static void exynos_iommu_domain_destroy(struct iommu_domain *domain)
+static void exynos_iommu_domain_destroy(struct iommu_domain *iommu_domain)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	struct sysmmu_drvdata *data;
 	unsigned long flags;
 	int i;
 
-	WARN_ON(!list_empty(&priv->clients));
+	WARN_ON(!list_empty(&domain->clients));
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&domain->lock, flags);
 
-	list_for_each_entry(data, &priv->clients, domain_node) {
+	list_for_each_entry(data, &domain->clients, domain_node) {
 		if (__sysmmu_disable(data))
 			data->master = NULL;
 		list_del_init(&data->domain_node);
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&domain->lock, flags);
 
 	for (i = 0; i < NUM_LV1ENTRIES; i++)
-		if (lv1ent_page(priv->pgtable + i))
+		if (lv1ent_page(domain->pgtable + i))
 			kmem_cache_free(lv2table_kmem_cache,
-				phys_to_virt(lv2table_base(priv->pgtable + i)));
+			      phys_to_virt(lv2table_base(domain->pgtable + i)));
 
-	free_pages((unsigned long)priv->pgtable, 2);
-	free_pages((unsigned long)priv->lv2entcnt, 1);
-	kfree(domain->priv);
-	domain->priv = NULL;
+	free_pages((unsigned long)domain->pgtable, 2);
+	free_pages((unsigned long)domain->lv2entcnt, 1);
+	kfree(iommu_domain->priv);
+	iommu_domain->priv = NULL;
 }
 
-static int exynos_iommu_attach_device(struct iommu_domain *domain,
+static int exynos_iommu_attach_device(struct iommu_domain *iommu_domain,
 				   struct device *dev)
 {
 	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	struct sysmmu_drvdata *data;
-	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
+	phys_addr_t pagetable = virt_to_phys(domain->pgtable);
 	unsigned long flags;
 	int ret = -ENODEV;
 
@@ -696,13 +697,13 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 
 	list_for_each_entry(data, &owner->clients, owner_node) {
 		pm_runtime_get_sync(data->sysmmu);
-		ret = __sysmmu_enable(data, pagetable, domain);
+		ret = __sysmmu_enable(data, pagetable, iommu_domain);
 		if (ret >= 0) {
 			data->master = dev;
 
-			spin_lock_irqsave(&priv->lock, flags);
-			list_add_tail(&data->domain_node, &priv->clients);
-			spin_unlock_irqrestore(&priv->lock, flags);
+			spin_lock_irqsave(&domain->lock, flags);
+			list_add_tail(&data->domain_node, &domain->clients);
+			spin_unlock_irqrestore(&domain->lock, flags);
 		}
 	}
 
@@ -718,11 +719,11 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 	return ret;
 }
 
-static void exynos_iommu_detach_device(struct iommu_domain *domain,
+static void exynos_iommu_detach_device(struct iommu_domain *iommu_domain,
 				    struct device *dev)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
-	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
+	phys_addr_t pagetable = virt_to_phys(domain->pgtable);
 	struct sysmmu_drvdata *data, *next;
 	unsigned long flags;
 	int found = 0;
@@ -730,8 +731,8 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 	if (!has_sysmmu(dev))
 		return;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	list_for_each_entry_safe(data, next, &priv->clients, domain_node) {
+	spin_lock_irqsave(&domain->lock, flags);
+	list_for_each_entry_safe(data, next, &domain->clients, domain_node) {
 		if (data->master == dev) {
 			if (__sysmmu_disable(data)) {
 				data->master = NULL;
@@ -741,7 +742,7 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 			found = true;
 		}
 	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&domain->lock, flags);
 
 	if (found)
 		dev_dbg(dev, "%s: Detached IOMMU with pgtable %pa\n",
@@ -750,7 +751,7 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 		dev_err(dev, "%s: No IOMMU is attached\n", __func__);
 }
 
-static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *priv,
+static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *domain,
 		sysmmu_pte_t *sent, sysmmu_iova_t iova, short *pgcounter)
 {
 	if (lv1ent_section(sent)) {
@@ -792,17 +793,17 @@ static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *priv,
 		if (need_flush_flpd_cache) {
 			struct sysmmu_drvdata *data;
 
-			spin_lock(&priv->lock);
-			list_for_each_entry(data, &priv->clients, domain_node)
+			spin_lock(&domain->lock);
+			list_for_each_entry(data, &domain->clients, domain_node)
 				sysmmu_tlb_invalidate_flpdcache(data, iova);
-			spin_unlock(&priv->lock);
+			spin_unlock(&domain->lock);
 		}
 	}
 
 	return page_entry(sent, iova);
 }
 
-static int lv1set_section(struct exynos_iommu_domain *priv,
+static int lv1set_section(struct exynos_iommu_domain *domain,
 			  sysmmu_pte_t *sent, sysmmu_iova_t iova,
 			  phys_addr_t paddr, short *pgcnt)
 {
@@ -827,17 +828,17 @@ static int lv1set_section(struct exynos_iommu_domain *priv,
 
 	pgtable_flush(sent, sent + 1);
 
-	spin_lock(&priv->lock);
+	spin_lock(&domain->lock);
 	if (lv1ent_page_zero(sent)) {
 		struct sysmmu_drvdata *data;
 		/*
 		 * Flushing FLPD cache in System MMU v3.3 that may cache a FLPD
 		 * entry by speculative prefetch of SLPD which has no mapping.
 		 */
-		list_for_each_entry(data, &priv->clients, domain_node)
+		list_for_each_entry(data, &domain->clients, domain_node)
 			sysmmu_tlb_invalidate_flpdcache(data, iova);
 	}
-	spin_unlock(&priv->lock);
+	spin_unlock(&domain->lock);
 
 	return 0;
 }
@@ -897,74 +898,76 @@ static int lv2set_page(sysmmu_pte_t *pent, phys_addr_t paddr, size_t size,
  *   than or equal to 128KiB.
  * - Start address of an I/O virtual region must be aligned by 128KiB.
  */
-static int exynos_iommu_map(struct iommu_domain *domain, unsigned long l_iova,
-			 phys_addr_t paddr, size_t size, int prot)
+static int exynos_iommu_map(struct iommu_domain *iommu_domain,
+			unsigned long l_iova, phys_addr_t paddr, size_t size,
+			int prot)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	sysmmu_pte_t *entry;
 	sysmmu_iova_t iova = (sysmmu_iova_t)l_iova;
 	unsigned long flags;
 	int ret = -ENOMEM;
 
-	BUG_ON(priv->pgtable == NULL);
+	BUG_ON(domain->pgtable == NULL);
 
-	spin_lock_irqsave(&priv->pgtablelock, flags);
+	spin_lock_irqsave(&domain->pgtablelock, flags);
 
-	entry = section_entry(priv->pgtable, iova);
+	entry = section_entry(domain->pgtable, iova);
 
 	if (size == SECT_SIZE) {
-		ret = lv1set_section(priv, entry, iova, paddr,
-					&priv->lv2entcnt[lv1ent_offset(iova)]);
+		ret = lv1set_section(domain, entry, iova, paddr,
+				     &domain->lv2entcnt[lv1ent_offset(iova)]);
 	} else {
 		sysmmu_pte_t *pent;
 
-		pent = alloc_lv2entry(priv, entry, iova,
-					&priv->lv2entcnt[lv1ent_offset(iova)]);
+		pent = alloc_lv2entry(domain, entry, iova,
+				      &domain->lv2entcnt[lv1ent_offset(iova)]);
 
 		if (IS_ERR(pent))
 			ret = PTR_ERR(pent);
 		else
 			ret = lv2set_page(pent, paddr, size,
-					&priv->lv2entcnt[lv1ent_offset(iova)]);
+				       &domain->lv2entcnt[lv1ent_offset(iova)]);
 	}
 
 	if (ret)
 		pr_err("%s: Failed(%d) to map %#zx bytes @ %#x\n",
 			__func__, ret, size, iova);
 
-	spin_unlock_irqrestore(&priv->pgtablelock, flags);
+	spin_unlock_irqrestore(&domain->pgtablelock, flags);
 
 	return ret;
 }
 
-static void exynos_iommu_tlb_invalidate_entry(struct exynos_iommu_domain *priv,
-						sysmmu_iova_t iova, size_t size)
+static
+void exynos_iommu_tlb_invalidate_entry(struct exynos_iommu_domain *domain,
+					sysmmu_iova_t iova, size_t size)
 {
 	struct sysmmu_drvdata *data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&domain->lock, flags);
 
-	list_for_each_entry(data, &priv->clients, domain_node)
+	list_for_each_entry(data, &domain->clients, domain_node)
 		sysmmu_tlb_invalidate_entry(data, iova, size);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
-static size_t exynos_iommu_unmap(struct iommu_domain *domain,
+static size_t exynos_iommu_unmap(struct iommu_domain *iommu_domain,
 					unsigned long l_iova, size_t size)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	sysmmu_iova_t iova = (sysmmu_iova_t)l_iova;
 	sysmmu_pte_t *ent;
 	size_t err_pgsize;
 	unsigned long flags;
 
-	BUG_ON(priv->pgtable == NULL);
+	BUG_ON(domain->pgtable == NULL);
 
-	spin_lock_irqsave(&priv->pgtablelock, flags);
+	spin_lock_irqsave(&domain->pgtablelock, flags);
 
-	ent = section_entry(priv->pgtable, iova);
+	ent = section_entry(domain->pgtable, iova);
 
 	if (lv1ent_section(ent)) {
 		if (WARN_ON(size < SECT_SIZE)) {
@@ -998,7 +1001,7 @@ static size_t exynos_iommu_unmap(struct iommu_domain *domain,
 		*ent = 0;
 		size = SPAGE_SIZE;
 		pgtable_flush(ent, ent + 1);
-		priv->lv2entcnt[lv1ent_offset(iova)] += 1;
+		domain->lv2entcnt[lv1ent_offset(iova)] += 1;
 		goto done;
 	}
 
@@ -1012,15 +1015,15 @@ static size_t exynos_iommu_unmap(struct iommu_domain *domain,
 	pgtable_flush(ent, ent + SPAGES_PER_LPAGE);
 
 	size = LPAGE_SIZE;
-	priv->lv2entcnt[lv1ent_offset(iova)] += SPAGES_PER_LPAGE;
+	domain->lv2entcnt[lv1ent_offset(iova)] += SPAGES_PER_LPAGE;
 done:
-	spin_unlock_irqrestore(&priv->pgtablelock, flags);
+	spin_unlock_irqrestore(&domain->pgtablelock, flags);
 
-	exynos_iommu_tlb_invalidate_entry(priv, iova, size);
+	exynos_iommu_tlb_invalidate_entry(domain, iova, size);
 
 	return size;
 err:
-	spin_unlock_irqrestore(&priv->pgtablelock, flags);
+	spin_unlock_irqrestore(&domain->pgtablelock, flags);
 
 	pr_err("%s: Failed: size(%#zx) @ %#x is smaller than page size %#zx\n",
 		__func__, size, iova, err_pgsize);
@@ -1028,17 +1031,17 @@ err:
 	return 0;
 }
 
-static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *domain,
+static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
 					  dma_addr_t iova)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	sysmmu_pte_t *entry;
 	unsigned long flags;
 	phys_addr_t phys = 0;
 
-	spin_lock_irqsave(&priv->pgtablelock, flags);
+	spin_lock_irqsave(&domain->pgtablelock, flags);
 
-	entry = section_entry(priv->pgtable, iova);
+	entry = section_entry(domain->pgtable, iova);
 
 	if (lv1ent_section(entry)) {
 		phys = section_phys(entry) + section_offs(iova);
@@ -1051,7 +1054,7 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *domain,
 			phys = spage_phys(entry) + spage_offs(iova);
 	}
 
-	spin_unlock_irqrestore(&priv->pgtablelock, flags);
+	spin_unlock_irqrestore(&domain->pgtablelock, flags);
 
 	return phys;
 }
-- 
1.9.2

[PATCH v4 14/18] iommu: exynos: rename variables to reflect their purpose

[Marek Szyprowski]

This patch renames some variables to make the code easier to understand.
'domain' is replaced by 'iommu_domain' (more generic entity) and really
meaning less 'priv' by 'domain' to reflect its purpose.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 191 ++++++++++++++++++++++---------------------
 1 file changed, 97 insertions(+), 94 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index f8609f40ae59..78a12ea78f1a 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -430,8 +430,8 @@ static void __sysmmu_enable_nocount(struct sysmmu_drvdata *data)
 		clk_disable(data->clk_master);
 }
 
-static int __sysmmu_enable(struct sysmmu_drvdata *data,
-			phys_addr_t pgtable, struct iommu_domain *domain)
+static int __sysmmu_enable(struct sysmmu_drvdata *data, phys_addr_t pgtable,
+			   struct iommu_domain *iommu_domain)
 {
 	int ret = 0;
 	unsigned long flags;
@@ -439,7 +439,7 @@ static int __sysmmu_enable(struct sysmmu_drvdata *data,
 	spin_lock_irqsave(&data->lock, flags);
 	if (set_sysmmu_active(data)) {
 		data->pgtable = pgtable;
-		data->domain = domain;
+		data->domain = iommu_domain;
 
 		__sysmmu_enable_nocount(data);
 
@@ -602,92 +602,93 @@ static inline void pgtable_flush(void *vastart, void *vaend)
 				virt_to_phys(vaend));
 }
 
-static int exynos_iommu_domain_init(struct iommu_domain *domain)
+static int exynos_iommu_domain_init(struct iommu_domain *iommu_domain)
 {
-	struct exynos_iommu_domain *priv;
+	struct exynos_iommu_domain *domain;
 	int i;
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv)
+	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
+	if (!domain)
 		return -ENOMEM;
 
-	priv->pgtable = (sysmmu_pte_t *)__get_free_pages(GFP_KERNEL, 2);
-	if (!priv->pgtable)
+	domain->pgtable = (sysmmu_pte_t *)__get_free_pages(GFP_KERNEL, 2);
+	if (!domain->pgtable)
 		goto err_pgtable;
 
-	priv->lv2entcnt = (short *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
-	if (!priv->lv2entcnt)
+	domain->lv2entcnt = (short *)
+			    __get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
+	if (!domain->lv2entcnt)
 		goto err_counter;
 
 	/* Workaround for System MMU v3.3 to prevent caching 1MiB mapping */
 	for (i = 0; i < NUM_LV1ENTRIES; i += 8) {
-		priv->pgtable[i + 0] = ZERO_LV2LINK;
-		priv->pgtable[i + 1] = ZERO_LV2LINK;
-		priv->pgtable[i + 2] = ZERO_LV2LINK;
-		priv->pgtable[i + 3] = ZERO_LV2LINK;
-		priv->pgtable[i + 4] = ZERO_LV2LINK;
-		priv->pgtable[i + 5] = ZERO_LV2LINK;
-		priv->pgtable[i + 6] = ZERO_LV2LINK;
-		priv->pgtable[i + 7] = ZERO_LV2LINK;
+		domain->pgtable[i + 0] = ZERO_LV2LINK;
+		domain->pgtable[i + 1] = ZERO_LV2LINK;
+		domain->pgtable[i + 2] = ZERO_LV2LINK;
+		domain->pgtable[i + 3] = ZERO_LV2LINK;
+		domain->pgtable[i + 4] = ZERO_LV2LINK;
+		domain->pgtable[i + 5] = ZERO_LV2LINK;
+		domain->pgtable[i + 6] = ZERO_LV2LINK;
+		domain->pgtable[i + 7] = ZERO_LV2LINK;
 	}
 
-	pgtable_flush(priv->pgtable, priv->pgtable + NUM_LV1ENTRIES);
+	pgtable_flush(domain->pgtable, domain->pgtable + NUM_LV1ENTRIES);
 
-	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->pgtablelock);
-	INIT_LIST_HEAD(&priv->clients);
+	spin_lock_init(&domain->lock);
+	spin_lock_init(&domain->pgtablelock);
+	INIT_LIST_HEAD(&domain->clients);
 
-	domain->geometry.aperture_start = 0;
-	domain->geometry.aperture_end   = ~0UL;
-	domain->geometry.force_aperture = true;
+	iommu_domain->geometry.aperture_start = 0;
+	iommu_domain->geometry.aperture_end   = ~0UL;
+	iommu_domain->geometry.force_aperture = true;
 
-	domain->priv = priv;
+	iommu_domain->priv = domain;
 	return 0;
 
 err_counter:
-	free_pages((unsigned long)priv->pgtable, 2);
+	free_pages((unsigned long)domain->pgtable, 2);
 err_pgtable:
-	kfree(priv);
+	kfree(domain);
 	return -ENOMEM;
 }
 
-static void exynos_iommu_domain_destroy(struct iommu_domain *domain)
+static void exynos_iommu_domain_destroy(struct iommu_domain *iommu_domain)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	struct sysmmu_drvdata *data;
 	unsigned long flags;
 	int i;
 
-	WARN_ON(!list_empty(&priv->clients));
+	WARN_ON(!list_empty(&domain->clients));
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&domain->lock, flags);
 
-	list_for_each_entry(data, &priv->clients, domain_node) {
+	list_for_each_entry(data, &domain->clients, domain_node) {
 		if (__sysmmu_disable(data))
 			data->master = NULL;
 		list_del_init(&data->domain_node);
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&domain->lock, flags);
 
 	for (i = 0; i < NUM_LV1ENTRIES; i++)
-		if (lv1ent_page(priv->pgtable + i))
+		if (lv1ent_page(domain->pgtable + i))
 			kmem_cache_free(lv2table_kmem_cache,
-				phys_to_virt(lv2table_base(priv->pgtable + i)));
+			      phys_to_virt(lv2table_base(domain->pgtable + i)));
 
-	free_pages((unsigned long)priv->pgtable, 2);
-	free_pages((unsigned long)priv->lv2entcnt, 1);
-	kfree(domain->priv);
-	domain->priv = NULL;
+	free_pages((unsigned long)domain->pgtable, 2);
+	free_pages((unsigned long)domain->lv2entcnt, 1);
+	kfree(iommu_domain->priv);
+	iommu_domain->priv = NULL;
 }
 
-static int exynos_iommu_attach_device(struct iommu_domain *domain,
+static int exynos_iommu_attach_device(struct iommu_domain *iommu_domain,
 				   struct device *dev)
 {
 	struct exynos_iommu_owner *owner = dev->archdata.iommu;
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	struct sysmmu_drvdata *data;
-	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
+	phys_addr_t pagetable = virt_to_phys(domain->pgtable);
 	unsigned long flags;
 	int ret = -ENODEV;
 
@@ -696,13 +697,13 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 
 	list_for_each_entry(data, &owner->clients, owner_node) {
 		pm_runtime_get_sync(data->sysmmu);
-		ret = __sysmmu_enable(data, pagetable, domain);
+		ret = __sysmmu_enable(data, pagetable, iommu_domain);
 		if (ret >= 0) {
 			data->master = dev;
 
-			spin_lock_irqsave(&priv->lock, flags);
-			list_add_tail(&data->domain_node, &priv->clients);
-			spin_unlock_irqrestore(&priv->lock, flags);
+			spin_lock_irqsave(&domain->lock, flags);
+			list_add_tail(&data->domain_node, &domain->clients);
+			spin_unlock_irqrestore(&domain->lock, flags);
 		}
 	}
 
@@ -718,11 +719,11 @@ static int exynos_iommu_attach_device(struct iommu_domain *domain,
 	return ret;
 }
 
-static void exynos_iommu_detach_device(struct iommu_domain *domain,
+static void exynos_iommu_detach_device(struct iommu_domain *iommu_domain,
 				    struct device *dev)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
-	phys_addr_t pagetable = virt_to_phys(priv->pgtable);
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
+	phys_addr_t pagetable = virt_to_phys(domain->pgtable);
 	struct sysmmu_drvdata *data, *next;
 	unsigned long flags;
 	int found = 0;
@@ -730,8 +731,8 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 	if (!has_sysmmu(dev))
 		return;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	list_for_each_entry_safe(data, next, &priv->clients, domain_node) {
+	spin_lock_irqsave(&domain->lock, flags);
+	list_for_each_entry_safe(data, next, &domain->clients, domain_node) {
 		if (data->master == dev) {
 			if (__sysmmu_disable(data)) {
 				data->master = NULL;
@@ -741,7 +742,7 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 			found = true;
 		}
 	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&domain->lock, flags);
 
 	if (found)
 		dev_dbg(dev, "%s: Detached IOMMU with pgtable %pa\n",
@@ -750,7 +751,7 @@ static void exynos_iommu_detach_device(struct iommu_domain *domain,
 		dev_err(dev, "%s: No IOMMU is attached\n", __func__);
 }
 
-static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *priv,
+static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *domain,
 		sysmmu_pte_t *sent, sysmmu_iova_t iova, short *pgcounter)
 {
 	if (lv1ent_section(sent)) {
@@ -792,17 +793,17 @@ static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *priv,
 		if (need_flush_flpd_cache) {
 			struct sysmmu_drvdata *data;
 
-			spin_lock(&priv->lock);
-			list_for_each_entry(data, &priv->clients, domain_node)
+			spin_lock(&domain->lock);
+			list_for_each_entry(data, &domain->clients, domain_node)
 				sysmmu_tlb_invalidate_flpdcache(data, iova);
-			spin_unlock(&priv->lock);
+			spin_unlock(&domain->lock);
 		}
 	}
 
 	return page_entry(sent, iova);
 }
 
-static int lv1set_section(struct exynos_iommu_domain *priv,
+static int lv1set_section(struct exynos_iommu_domain *domain,
 			  sysmmu_pte_t *sent, sysmmu_iova_t iova,
 			  phys_addr_t paddr, short *pgcnt)
 {
@@ -827,17 +828,17 @@ static int lv1set_section(struct exynos_iommu_domain *priv,
 
 	pgtable_flush(sent, sent + 1);
 
-	spin_lock(&priv->lock);
+	spin_lock(&domain->lock);
 	if (lv1ent_page_zero(sent)) {
 		struct sysmmu_drvdata *data;
 		/*
 		 * Flushing FLPD cache in System MMU v3.3 that may cache a FLPD
 		 * entry by speculative prefetch of SLPD which has no mapping.
 		 */
-		list_for_each_entry(data, &priv->clients, domain_node)
+		list_for_each_entry(data, &domain->clients, domain_node)
 			sysmmu_tlb_invalidate_flpdcache(data, iova);
 	}
-	spin_unlock(&priv->lock);
+	spin_unlock(&domain->lock);
 
 	return 0;
 }
@@ -897,74 +898,76 @@ static int lv2set_page(sysmmu_pte_t *pent, phys_addr_t paddr, size_t size,
  *   than or equal to 128KiB.
  * - Start address of an I/O virtual region must be aligned by 128KiB.
  */
-static int exynos_iommu_map(struct iommu_domain *domain, unsigned long l_iova,
-			 phys_addr_t paddr, size_t size, int prot)
+static int exynos_iommu_map(struct iommu_domain *iommu_domain,
+			unsigned long l_iova, phys_addr_t paddr, size_t size,
+			int prot)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	sysmmu_pte_t *entry;
 	sysmmu_iova_t iova = (sysmmu_iova_t)l_iova;
 	unsigned long flags;
 	int ret = -ENOMEM;
 
-	BUG_ON(priv->pgtable == NULL);
+	BUG_ON(domain->pgtable == NULL);
 
-	spin_lock_irqsave(&priv->pgtablelock, flags);
+	spin_lock_irqsave(&domain->pgtablelock, flags);
 
-	entry = section_entry(priv->pgtable, iova);
+	entry = section_entry(domain->pgtable, iova);
 
 	if (size == SECT_SIZE) {
-		ret = lv1set_section(priv, entry, iova, paddr,
-					&priv->lv2entcnt[lv1ent_offset(iova)]);
+		ret = lv1set_section(domain, entry, iova, paddr,
+				     &domain->lv2entcnt[lv1ent_offset(iova)]);
 	} else {
 		sysmmu_pte_t *pent;
 
-		pent = alloc_lv2entry(priv, entry, iova,
-					&priv->lv2entcnt[lv1ent_offset(iova)]);
+		pent = alloc_lv2entry(domain, entry, iova,
+				      &domain->lv2entcnt[lv1ent_offset(iova)]);
 
 		if (IS_ERR(pent))
 			ret = PTR_ERR(pent);
 		else
 			ret = lv2set_page(pent, paddr, size,
-					&priv->lv2entcnt[lv1ent_offset(iova)]);
+				       &domain->lv2entcnt[lv1ent_offset(iova)]);
 	}
 
 	if (ret)
 		pr_err("%s: Failed(%d) to map %#zx bytes @ %#x\n",
 			__func__, ret, size, iova);
 
-	spin_unlock_irqrestore(&priv->pgtablelock, flags);
+	spin_unlock_irqrestore(&domain->pgtablelock, flags);
 
 	return ret;
 }
 
-static void exynos_iommu_tlb_invalidate_entry(struct exynos_iommu_domain *priv,
-						sysmmu_iova_t iova, size_t size)
+static
+void exynos_iommu_tlb_invalidate_entry(struct exynos_iommu_domain *domain,
+					sysmmu_iova_t iova, size_t size)
 {
 	struct sysmmu_drvdata *data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&domain->lock, flags);
 
-	list_for_each_entry(data, &priv->clients, domain_node)
+	list_for_each_entry(data, &domain->clients, domain_node)
 		sysmmu_tlb_invalidate_entry(data, iova, size);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
-static size_t exynos_iommu_unmap(struct iommu_domain *domain,
+static size_t exynos_iommu_unmap(struct iommu_domain *iommu_domain,
 					unsigned long l_iova, size_t size)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	sysmmu_iova_t iova = (sysmmu_iova_t)l_iova;
 	sysmmu_pte_t *ent;
 	size_t err_pgsize;
 	unsigned long flags;
 
-	BUG_ON(priv->pgtable == NULL);
+	BUG_ON(domain->pgtable == NULL);
 
-	spin_lock_irqsave(&priv->pgtablelock, flags);
+	spin_lock_irqsave(&domain->pgtablelock, flags);
 
-	ent = section_entry(priv->pgtable, iova);
+	ent = section_entry(domain->pgtable, iova);
 
 	if (lv1ent_section(ent)) {
 		if (WARN_ON(size < SECT_SIZE)) {
@@ -998,7 +1001,7 @@ static size_t exynos_iommu_unmap(struct iommu_domain *domain,
 		*ent = 0;
 		size = SPAGE_SIZE;
 		pgtable_flush(ent, ent + 1);
-		priv->lv2entcnt[lv1ent_offset(iova)] += 1;
+		domain->lv2entcnt[lv1ent_offset(iova)] += 1;
 		goto done;
 	}
 
@@ -1012,15 +1015,15 @@ static size_t exynos_iommu_unmap(struct iommu_domain *domain,
 	pgtable_flush(ent, ent + SPAGES_PER_LPAGE);
 
 	size = LPAGE_SIZE;
-	priv->lv2entcnt[lv1ent_offset(iova)] += SPAGES_PER_LPAGE;
+	domain->lv2entcnt[lv1ent_offset(iova)] += SPAGES_PER_LPAGE;
 done:
-	spin_unlock_irqrestore(&priv->pgtablelock, flags);
+	spin_unlock_irqrestore(&domain->pgtablelock, flags);
 
-	exynos_iommu_tlb_invalidate_entry(priv, iova, size);
+	exynos_iommu_tlb_invalidate_entry(domain, iova, size);
 
 	return size;
 err:
-	spin_unlock_irqrestore(&priv->pgtablelock, flags);
+	spin_unlock_irqrestore(&domain->pgtablelock, flags);
 
 	pr_err("%s: Failed: size(%#zx) @ %#x is smaller than page size %#zx\n",
 		__func__, size, iova, err_pgsize);
@@ -1028,17 +1031,17 @@ err:
 	return 0;
 }
 
-static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *domain,
+static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
 					  dma_addr_t iova)
 {
-	struct exynos_iommu_domain *priv = domain->priv;
+	struct exynos_iommu_domain *domain = iommu_domain->priv;
 	sysmmu_pte_t *entry;
 	unsigned long flags;
 	phys_addr_t phys = 0;
 
-	spin_lock_irqsave(&priv->pgtablelock, flags);
+	spin_lock_irqsave(&domain->pgtablelock, flags);
 
-	entry = section_entry(priv->pgtable, iova);
+	entry = section_entry(domain->pgtable, iova);
 
 	if (lv1ent_section(entry)) {
 		phys = section_phys(entry) + section_offs(iova);
@@ -1051,7 +1054,7 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *domain,
 			phys = spage_phys(entry) + spage_offs(iova);
 	}
 
-	spin_unlock_irqrestore(&priv->pgtablelock, flags);
+	spin_unlock_irqrestore(&domain->pgtablelock, flags);
 
 	return phys;
 }
-- 
1.9.2

[PATCH v4 15/18] iommu: exynos: document internal structures

[Marek Szyprowski]

Add a few words of comment to all internal structures used by the driver.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 49 +++++++++++++++++++++++++++++---------------
 1 file changed, 33 insertions(+), 16 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 78a12ea78f1a..ef7172551a39 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -184,32 +184,49 @@ static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
 	"UNKNOWN FAULT"
 };
 
-/* attached to dev.archdata.iommu of the master device */
+/*
+ * This structure is attached to dev.archdata.iommu of the master device
+ * on device add, contains a list of SYSMMU controllers defined by device tree,
+ * which are bound to given master device. It is usually referenced by 'owner'
+ * pointer.
+ */
 struct exynos_iommu_owner {
-	struct list_head clients;
+	struct list_head clients; /* list of sysmmu_drvdata.owner_node */
 };
 
+/*
+ * This structure is stored in ->priv field of generic struct iommu_domain,
+ * contains list of SYSMMU controllers from all master devices, which has been
+ * attached to this domain and page tables of IO address space defined by this
+ * domain. It is usually referenced by 'domain' pointer.
+ */
 struct exynos_iommu_domain {
-	struct list_head clients; /* list of sysmmu_drvdata.node */
+	struct list_head clients; /* list of sysmmu_drvdata.domain_node */
 	sysmmu_pte_t *pgtable; /* lv1 page table, 16KB */
 	short *lv2entcnt; /* free lv2 entry counter for each section */
-	spinlock_t lock; /* lock for this structure */
+	spinlock_t lock; /* lock for modyfying list of clients */
 	spinlock_t pgtablelock; /* lock for modifying page table @ pgtable */
 };
 
+/*
+ * This structure hold all data of a single SYSMMU controller, this includes
+ * hw resources like registers and clocks, pointers and list nodes to connect
+ * it to all other structures, internal state and parameters read from device
+ * tree. It is usually referenced by 'data' pointer.
+ */
 struct sysmmu_drvdata {
-	struct device *sysmmu;	/* System MMU's device descriptor */
-	struct device *master;	/* Owner of system MMU */
-	void __iomem *sfrbase;
-	struct clk *clk;
-	struct clk *clk_master;
-	int activations;
-	spinlock_t lock;
-	struct iommu_domain *domain;
-	struct list_head domain_node;
-	struct list_head owner_node;
-	phys_addr_t pgtable;
-	int version;
+	struct device *sysmmu; /* SYSMMU controller device */
+	struct device *master; /* master device (owner of given SYSMMU) */
+	void __iomem *sfrbase; /* our registers */
+	struct clk *clk; /* SYSMMU's clock */
+	struct clk *clk_master; /* master's device clock */
+	int activations; /* number of calls to sysmmu_enable */
+	spinlock_t lock; /* lock for modyfying enable/disable state */
+	struct iommu_domain *domain; /* domain we belong to */
+	struct list_head domain_node; /* node for domain clients list */
+	struct list_head owner_node; /* node for owner clients list */
+	phys_addr_t pgtable; /* assigned page table structure */
+	int version; /* our version */
 };
 
 static bool set_sysmmu_active(struct sysmmu_drvdata *data)
-- 
1.9.2

[PATCH v4 15/18] iommu: exynos: document internal structures

[Marek Szyprowski]

Add a few words of comment to all internal structures used by the driver.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 49 +++++++++++++++++++++++++++++---------------
 1 file changed, 33 insertions(+), 16 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 78a12ea78f1a..ef7172551a39 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -184,32 +184,49 @@ static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
 	"UNKNOWN FAULT"
 };
 
-/* attached to dev.archdata.iommu of the master device */
+/*
+ * This structure is attached to dev.archdata.iommu of the master device
+ * on device add, contains a list of SYSMMU controllers defined by device tree,
+ * which are bound to given master device. It is usually referenced by 'owner'
+ * pointer.
+ */
 struct exynos_iommu_owner {
-	struct list_head clients;
+	struct list_head clients; /* list of sysmmu_drvdata.owner_node */
 };
 
+/*
+ * This structure is stored in ->priv field of generic struct iommu_domain,
+ * contains list of SYSMMU controllers from all master devices, which has been
+ * attached to this domain and page tables of IO address space defined by this
+ * domain. It is usually referenced by 'domain' pointer.
+ */
 struct exynos_iommu_domain {
-	struct list_head clients; /* list of sysmmu_drvdata.node */
+	struct list_head clients; /* list of sysmmu_drvdata.domain_node */
 	sysmmu_pte_t *pgtable; /* lv1 page table, 16KB */
 	short *lv2entcnt; /* free lv2 entry counter for each section */
-	spinlock_t lock; /* lock for this structure */
+	spinlock_t lock; /* lock for modyfying list of clients */
 	spinlock_t pgtablelock; /* lock for modifying page table @ pgtable */
 };
 
+/*
+ * This structure hold all data of a single SYSMMU controller, this includes
+ * hw resources like registers and clocks, pointers and list nodes to connect
+ * it to all other structures, internal state and parameters read from device
+ * tree. It is usually referenced by 'data' pointer.
+ */
 struct sysmmu_drvdata {
-	struct device *sysmmu;	/* System MMU's device descriptor */
-	struct device *master;	/* Owner of system MMU */
-	void __iomem *sfrbase;
-	struct clk *clk;
-	struct clk *clk_master;
-	int activations;
-	spinlock_t lock;
-	struct iommu_domain *domain;
-	struct list_head domain_node;
-	struct list_head owner_node;
-	phys_addr_t pgtable;
-	int version;
+	struct device *sysmmu; /* SYSMMU controller device */
+	struct device *master; /* master device (owner of given SYSMMU) */
+	void __iomem *sfrbase; /* our registers */
+	struct clk *clk; /* SYSMMU's clock */
+	struct clk *clk_master; /* master's device clock */
+	int activations; /* number of calls to sysmmu_enable */
+	spinlock_t lock; /* lock for modyfying enable/disable state */
+	struct iommu_domain *domain; /* domain we belong to */
+	struct list_head domain_node; /* node for domain clients list */
+	struct list_head owner_node; /* node for owner clients list */
+	phys_addr_t pgtable; /* assigned page table structure */
+	int version; /* our version */
 };
 
 static bool set_sysmmu_active(struct sysmmu_drvdata *data)
-- 
1.9.2

[PATCH v4 16/18] iommu: exynos: remove excessive includes and sort others alphabetically

[Marek Szyprowski]

Removed following unused includes: <linux/mm.h>, <linux/errno.h>,
<linux/memblock.h> and <linux/export.h>.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index ef7172551a39..c53cc8f61176 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -12,19 +12,15 @@
 #define DEBUG
 #endif
 
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/mm.h>
+#include <linux/io.h>
 #include <linux/iommu.h>
-#include <linux/errno.h>
+#include <linux/interrupt.h>
 #include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
 
 #include <asm/cacheflush.h>
 #include <asm/pgtable.h>
-- 
1.9.2

[PATCH v4 16/18] iommu: exynos: remove excessive includes and sort others alphabetically

[Marek Szyprowski]

Removed following unused includes: <linux/mm.h>, <linux/errno.h>,
<linux/memblock.h> and <linux/export.h>.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index ef7172551a39..c53cc8f61176 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -12,19 +12,15 @@
 #define DEBUG
 #endif
 
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/mm.h>
+#include <linux/io.h>
 #include <linux/iommu.h>
-#include <linux/errno.h>
+#include <linux/interrupt.h>
 #include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
 
 #include <asm/cacheflush.h>
 #include <asm/pgtable.h>
-- 
1.9.2

[PATCH v4 17/18] iommu: exynos: init from dt-specific callback instead of initcall

[Marek Szyprowski]

This patch introduces IOMMU_OF_DECLARE-based initialization to the
driver, which replaces subsys_initcall-based procedure.
exynos_iommu_of_setup ensures that each sysmmu controller is probed
before its master device.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index c53cc8f61176..ea2659159e63 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -13,16 +13,21 @@
 #endif
 
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/iommu.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/of.h>
+#include <linux/of_iommu.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
 #include <asm/cacheflush.h>
+#include <asm/dma-iommu.h>
 #include <asm/pgtable.h>
 
 typedef u32 sysmmu_iova_t;
@@ -1084,6 +1089,8 @@ static const struct iommu_ops exynos_iommu_ops = {
 	.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
 };
 
+static int init_done;
+
 static int __init exynos_iommu_init(void)
 {
 	int ret;
@@ -1116,6 +1123,8 @@ static int __init exynos_iommu_init(void)
 		goto err_set_iommu;
 	}
 
+	init_done = true;
+
 	return 0;
 err_set_iommu:
 	kmem_cache_free(lv2table_kmem_cache, zero_lv2_table);
@@ -1125,4 +1134,21 @@ err_reg_driver:
 	kmem_cache_destroy(lv2table_kmem_cache);
 	return ret;
 }
-subsys_initcall(exynos_iommu_init);
+
+static int __init exynos_iommu_of_setup(struct device_node *np)
+{
+	struct platform_device *pdev;
+
+	if (!init_done)
+		exynos_iommu_init();
+
+	pdev = of_platform_device_create(np, NULL, platform_bus_type.dev_root);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	of_iommu_set_ops(np, &exynos_iommu_ops);
+	return 0;
+}
+
+IOMMU_OF_DECLARE(exynos_iommu_of, "samsung,exynos-sysmmu",
+		 exynos_iommu_of_setup);
-- 
1.9.2

[PATCH v4 17/18] iommu: exynos: init from dt-specific callback instead of initcall

[Marek Szyprowski]

This patch introduces IOMMU_OF_DECLARE-based initialization to the
driver, which replaces subsys_initcall-based procedure.
exynos_iommu_of_setup ensures that each sysmmu controller is probed
before its master device.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index c53cc8f61176..ea2659159e63 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -13,16 +13,21 @@
 #endif
 
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/iommu.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/of.h>
+#include <linux/of_iommu.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
 #include <asm/cacheflush.h>
+#include <asm/dma-iommu.h>
 #include <asm/pgtable.h>
 
 typedef u32 sysmmu_iova_t;
@@ -1084,6 +1089,8 @@ static const struct iommu_ops exynos_iommu_ops = {
 	.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
 };
 
+static int init_done;
+
 static int __init exynos_iommu_init(void)
 {
 	int ret;
@@ -1116,6 +1123,8 @@ static int __init exynos_iommu_init(void)
 		goto err_set_iommu;
 	}
 
+	init_done = true;
+
 	return 0;
 err_set_iommu:
 	kmem_cache_free(lv2table_kmem_cache, zero_lv2_table);
@@ -1125,4 +1134,21 @@ err_reg_driver:
 	kmem_cache_destroy(lv2table_kmem_cache);
 	return ret;
 }
-subsys_initcall(exynos_iommu_init);
+
+static int __init exynos_iommu_of_setup(struct device_node *np)
+{
+	struct platform_device *pdev;
+
+	if (!init_done)
+		exynos_iommu_init();
+
+	pdev = of_platform_device_create(np, NULL, platform_bus_type.dev_root);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	of_iommu_set_ops(np, &exynos_iommu_ops);
+	return 0;
+}
+
+IOMMU_OF_DECLARE(exynos_iommu_of, "samsung,exynos-sysmmu",
+		 exynos_iommu_of_setup);
-- 
1.9.2

[PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Marek Szyprowski]

This patch adds implementation of of_xlate callback, which prepares
masters device for attaching to IOMMU. This callback is called during
creating devices from device tree.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index ea2659159e63..5432b443abfc 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1077,6 +1077,33 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
 	return phys;
 }
 
+static int exynos_iommu_of_xlate(struct device *dev,
+				 struct of_phandle_args *spec)
+{
+	struct exynos_iommu_owner *owner = dev->archdata.iommu;
+	struct platform_device *sysmmu = of_find_device_by_node(spec->np);
+	struct sysmmu_drvdata *data;
+
+	if (!sysmmu)
+		return -ENODEV;
+
+	data = platform_get_drvdata(sysmmu);
+	if (!data)
+		return -ENODEV;
+
+	if (!owner) {
+		owner = kzalloc(sizeof(*owner), GFP_KERNEL);
+		if (!owner)
+			return -ENOMEM;
+
+		INIT_LIST_HEAD(&owner->clients);
+		dev->archdata.iommu = owner;
+	}
+
+	list_add_tail(&data->owner_node, &owner->clients);
+	return 0;
+}
+
 static const struct iommu_ops exynos_iommu_ops = {
 	.domain_init = exynos_iommu_domain_init,
 	.domain_destroy = exynos_iommu_domain_destroy,
@@ -1087,6 +1114,7 @@ static const struct iommu_ops exynos_iommu_ops = {
 	.map_sg = default_iommu_map_sg,
 	.iova_to_phys = exynos_iommu_iova_to_phys,
 	.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
+	.of_xlate = exynos_iommu_of_xlate,
 };
 
 static int init_done;
-- 
1.9.2

[PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Marek Szyprowski]

This patch adds implementation of of_xlate callback, which prepares
masters device for attaching to IOMMU. This callback is called during
creating devices from device tree.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/iommu/exynos-iommu.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index ea2659159e63..5432b443abfc 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1077,6 +1077,33 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
 	return phys;
 }
 
+static int exynos_iommu_of_xlate(struct device *dev,
+				 struct of_phandle_args *spec)
+{
+	struct exynos_iommu_owner *owner = dev->archdata.iommu;
+	struct platform_device *sysmmu = of_find_device_by_node(spec->np);
+	struct sysmmu_drvdata *data;
+
+	if (!sysmmu)
+		return -ENODEV;
+
+	data = platform_get_drvdata(sysmmu);
+	if (!data)
+		return -ENODEV;
+
+	if (!owner) {
+		owner = kzalloc(sizeof(*owner), GFP_KERNEL);
+		if (!owner)
+			return -ENOMEM;
+
+		INIT_LIST_HEAD(&owner->clients);
+		dev->archdata.iommu = owner;
+	}
+
+	list_add_tail(&data->owner_node, &owner->clients);
+	return 0;
+}
+
 static const struct iommu_ops exynos_iommu_ops = {
 	.domain_init = exynos_iommu_domain_init,
 	.domain_destroy = exynos_iommu_domain_destroy,
@@ -1087,6 +1114,7 @@ static const struct iommu_ops exynos_iommu_ops = {
 	.map_sg = default_iommu_map_sg,
 	.iova_to_phys = exynos_iommu_iova_to_phys,
 	.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
+	.of_xlate = exynos_iommu_of_xlate,
 };
 
 static int init_done;
-- 
1.9.2

Re: [PATCH v4 17/18] iommu: exynos: init from dt-specific callback instead of initcall

[Laurent Pinchart]

Hi Marek,

Thank you for the patch.

On Friday 16 January 2015 10:13:11 Marek Szyprowski wrote:
> This patch introduces IOMMU_OF_DECLARE-based initialization to the
> driver, which replaces subsys_initcall-based procedure.
> exynos_iommu_of_setup ensures that each sysmmu controller is probed
> before its master device.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/iommu/exynos-iommu.c | 28 +++++++++++++++++++++++++++-
>  1 file changed, 27 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
> index c53cc8f61176..ea2659159e63 100644
> --- a/drivers/iommu/exynos-iommu.c
> +++ b/drivers/iommu/exynos-iommu.c
> @@ -13,16 +13,21 @@
>  #endif
> 
>  #include <linux/clk.h>
> +#include <linux/dma-mapping.h>
>  #include <linux/err.h>
>  #include <linux/io.h>
>  #include <linux/iommu.h>
>  #include <linux/interrupt.h>
>  #include <linux/list.h>
> +#include <linux/of.h>
> +#include <linux/of_iommu.h>
> +#include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/slab.h>
> 
>  #include <asm/cacheflush.h>
> +#include <asm/dma-iommu.h>
>  #include <asm/pgtable.h>
> 
>  typedef u32 sysmmu_iova_t;
> @@ -1084,6 +1089,8 @@ static const struct iommu_ops exynos_iommu_ops = {
>  	.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
>  };
> 
> +static int init_done;
> +
>  static int __init exynos_iommu_init(void)
>  {
>  	int ret;
> @@ -1116,6 +1123,8 @@ static int __init exynos_iommu_init(void)
>  		goto err_set_iommu;
>  	}
> 
> +	init_done = true;
> +
>  	return 0;
>  err_set_iommu:
>  	kmem_cache_free(lv2table_kmem_cache, zero_lv2_table);
> @@ -1125,4 +1134,21 @@ err_reg_driver:
>  	kmem_cache_destroy(lv2table_kmem_cache);
>  	return ret;
>  }
> -subsys_initcall(exynos_iommu_init);
> +
> +static int __init exynos_iommu_of_setup(struct device_node *np)
> +{
> +	struct platform_device *pdev;
> +
> +	if (!init_done)
> +		exynos_iommu_init();
> +
> +	pdev = of_platform_device_create(np, NULL, platform_bus_type.dev_root);
> +	if (IS_ERR(pdev))
> +		return PTR_ERR(pdev);

This feels like a hack to me. What happens here is that you're using the 
IOMMU_OF_DECLARE mechanism to make sure that the iommu platform device will be 
created and registered before the normal OF bus populate mechanism kicks in, 
thus ensuring that the iommu gets probed before other devices. In practice 
this is pretty similar to using different init levels, which is what Will's 
patch set was trying to avoid in the first place. Creating a new kind of init 
levels mechanism doesn't sound very good to me.

The existing exynos-iommu driver is based on classic instantiation of a 
platform device from DT, using the normal device probing mechanism. As such it 
relies on the availability of a struct device for various helper functions. I 
thus understand why you want a struct device being registered for the iommu, 
instead of initializing the device right from the exynos_iommu_of_setup() 
function without a corresponding struct device being registered.

This leads me to question whether we should really introduce IOMMU_OF_DECLARE. 
Using regular deferred probing seems more and more like a better solution to 
me.

> +	of_iommu_set_ops(np, &exynos_iommu_ops);
> +	return 0;
> +}
> +
> +IOMMU_OF_DECLARE(exynos_iommu_of, "samsung,exynos-sysmmu",
> +		 exynos_iommu_of_setup);

-- 
Regards,

Laurent Pinchart

[PATCH v4 17/18] iommu: exynos: init from dt-specific callback instead of initcall

[Laurent Pinchart]

Hi Marek,

Thank you for the patch.

On Friday 16 January 2015 10:13:11 Marek Szyprowski wrote:
> This patch introduces IOMMU_OF_DECLARE-based initialization to the
> driver, which replaces subsys_initcall-based procedure.
> exynos_iommu_of_setup ensures that each sysmmu controller is probed
> before its master device.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/iommu/exynos-iommu.c | 28 +++++++++++++++++++++++++++-
>  1 file changed, 27 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
> index c53cc8f61176..ea2659159e63 100644
> --- a/drivers/iommu/exynos-iommu.c
> +++ b/drivers/iommu/exynos-iommu.c
> @@ -13,16 +13,21 @@
>  #endif
> 
>  #include <linux/clk.h>
> +#include <linux/dma-mapping.h>
>  #include <linux/err.h>
>  #include <linux/io.h>
>  #include <linux/iommu.h>
>  #include <linux/interrupt.h>
>  #include <linux/list.h>
> +#include <linux/of.h>
> +#include <linux/of_iommu.h>
> +#include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/slab.h>
> 
>  #include <asm/cacheflush.h>
> +#include <asm/dma-iommu.h>
>  #include <asm/pgtable.h>
> 
>  typedef u32 sysmmu_iova_t;
> @@ -1084,6 +1089,8 @@ static const struct iommu_ops exynos_iommu_ops = {
>  	.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
>  };
> 
> +static int init_done;
> +
>  static int __init exynos_iommu_init(void)
>  {
>  	int ret;
> @@ -1116,6 +1123,8 @@ static int __init exynos_iommu_init(void)
>  		goto err_set_iommu;
>  	}
> 
> +	init_done = true;
> +
>  	return 0;
>  err_set_iommu:
>  	kmem_cache_free(lv2table_kmem_cache, zero_lv2_table);
> @@ -1125,4 +1134,21 @@ err_reg_driver:
>  	kmem_cache_destroy(lv2table_kmem_cache);
>  	return ret;
>  }
> -subsys_initcall(exynos_iommu_init);
> +
> +static int __init exynos_iommu_of_setup(struct device_node *np)
> +{
> +	struct platform_device *pdev;
> +
> +	if (!init_done)
> +		exynos_iommu_init();
> +
> +	pdev = of_platform_device_create(np, NULL, platform_bus_type.dev_root);
> +	if (IS_ERR(pdev))
> +		return PTR_ERR(pdev);

This feels like a hack to me. What happens here is that you're using the 
IOMMU_OF_DECLARE mechanism to make sure that the iommu platform device will be 
created and registered before the normal OF bus populate mechanism kicks in, 
thus ensuring that the iommu gets probed before other devices. In practice 
this is pretty similar to using different init levels, which is what Will's 
patch set was trying to avoid in the first place. Creating a new kind of init 
levels mechanism doesn't sound very good to me.

The existing exynos-iommu driver is based on classic instantiation of a 
platform device from DT, using the normal device probing mechanism. As such it 
relies on the availability of a struct device for various helper functions. I 
thus understand why you want a struct device being registered for the iommu, 
instead of initializing the device right from the exynos_iommu_of_setup() 
function without a corresponding struct device being registered.

This leads me to question whether we should really introduce IOMMU_OF_DECLARE. 
Using regular deferred probing seems more and more like a better solution to 
me.

> +	of_iommu_set_ops(np, &exynos_iommu_ops);
> +	return 0;
> +}
> +
> +IOMMU_OF_DECLARE(exynos_iommu_of, "samsung,exynos-sysmmu",
> +		 exynos_iommu_of_setup);

-- 
Regards,

Laurent Pinchart

Re: [PATCH v4 17/18] iommu: exynos: init from dt-specific callback instead of initcall

[Will Deacon]

On Mon, Jan 19, 2015 at 01:11:07AM +0000, Laurent Pinchart wrote:
> On Friday 16 January 2015 10:13:11 Marek Szyprowski wrote:
> > This patch introduces IOMMU_OF_DECLARE-based initialization to the
> > driver, which replaces subsys_initcall-based procedure.
> > exynos_iommu_of_setup ensures that each sysmmu controller is probed
> > before its master device.

[...]

> > +static int __init exynos_iommu_of_setup(struct device_node *np)
> > +{
> > +	struct platform_device *pdev;
> > +
> > +	if (!init_done)
> > +		exynos_iommu_init();
> > +
> > +	pdev = of_platform_device_create(np, NULL, platform_bus_type.dev_root);
> > +	if (IS_ERR(pdev))
> > +		return PTR_ERR(pdev);
> 
> This feels like a hack to me. What happens here is that you're using the 
> IOMMU_OF_DECLARE mechanism to make sure that the iommu platform device will be 
> created and registered before the normal OF bus populate mechanism kicks in, 
> thus ensuring that the iommu gets probed before other devices. In practice 
> this is pretty similar to using different init levels, which is what Will's 
> patch set was trying to avoid in the first place. Creating a new kind of init 
> levels mechanism doesn't sound very good to me.
> 
> The existing exynos-iommu driver is based on classic instantiation of a 
> platform device from DT, using the normal device probing mechanism. As such it 
> relies on the availability of a struct device for various helper functions. I 
> thus understand why you want a struct device being registered for the iommu, 
> instead of initializing the device right from the exynos_iommu_of_setup() 
> function without a corresponding struct device being registered.
> 
> This leads me to question whether we should really introduce IOMMU_OF_DECLARE. 
> Using regular deferred probing seems more and more like a better solution to 
> me.

We seem to be going round and round on this argument. I said before that
I'm not against changing this [1], but somebody would need to propose
patches, which hasn't happened in recent history.

Arnd also makes some good arguments against using probing [2], which would
need further discussion.

Basically, it looks like there are two sides to this argument and I don't
see anything changing without patch proposals. The only thing that the
current discussions seem to be achieving is blocking people like Marek,
who are trying to make use of what we have in mainline today!

Will

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310783.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310992.html

[PATCH v4 17/18] iommu: exynos: init from dt-specific callback instead of initcall

[Will Deacon]

On Mon, Jan 19, 2015 at 01:11:07AM +0000, Laurent Pinchart wrote:
> On Friday 16 January 2015 10:13:11 Marek Szyprowski wrote:
> > This patch introduces IOMMU_OF_DECLARE-based initialization to the
> > driver, which replaces subsys_initcall-based procedure.
> > exynos_iommu_of_setup ensures that each sysmmu controller is probed
> > before its master device.

[...]

> > +static int __init exynos_iommu_of_setup(struct device_node *np)
> > +{
> > +	struct platform_device *pdev;
> > +
> > +	if (!init_done)
> > +		exynos_iommu_init();
> > +
> > +	pdev = of_platform_device_create(np, NULL, platform_bus_type.dev_root);
> > +	if (IS_ERR(pdev))
> > +		return PTR_ERR(pdev);
> 
> This feels like a hack to me. What happens here is that you're using the 
> IOMMU_OF_DECLARE mechanism to make sure that the iommu platform device will be 
> created and registered before the normal OF bus populate mechanism kicks in, 
> thus ensuring that the iommu gets probed before other devices. In practice 
> this is pretty similar to using different init levels, which is what Will's 
> patch set was trying to avoid in the first place. Creating a new kind of init 
> levels mechanism doesn't sound very good to me.
> 
> The existing exynos-iommu driver is based on classic instantiation of a 
> platform device from DT, using the normal device probing mechanism. As such it 
> relies on the availability of a struct device for various helper functions. I 
> thus understand why you want a struct device being registered for the iommu, 
> instead of initializing the device right from the exynos_iommu_of_setup() 
> function without a corresponding struct device being registered.
> 
> This leads me to question whether we should really introduce IOMMU_OF_DECLARE. 
> Using regular deferred probing seems more and more like a better solution to 
> me.

We seem to be going round and round on this argument. I said before that
I'm not against changing this [1], but somebody would need to propose
patches, which hasn't happened in recent history.

Arnd also makes some good arguments against using probing [2], which would
need further discussion.

Basically, it looks like there are two sides to this argument and I don't
see anything changing without patch proposals. The only thing that the
current discussions seem to be achieving is blocking people like Marek,
who are trying to make use of what we have in mainline today!

Will

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310783.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310992.html

Re: [PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Javier Martinez Canillas]

Hello Marek,

I wanted to test your IOMMU series on an Exynos5420 Peach Pit but the
kernel hangs with your series + dependencies on top of 3.19-rc5.

Bisecting I found that $subject is the offending commit. I've pushed
my test branch [0] in case I missed something.

On Fri, Jan 16, 2015 at 10:13 AM, Marek Szyprowski
<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
> This patch adds implementation of of_xlate callback, which prepares
> masters device for attaching to IOMMU. This callback is called during
> creating devices from device tree.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
>  drivers/iommu/exynos-iommu.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
>
> diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
> index ea2659159e63..5432b443abfc 100644
> --- a/drivers/iommu/exynos-iommu.c
> +++ b/drivers/iommu/exynos-iommu.c
> @@ -1077,6 +1077,33 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
>         return phys;
>  }
>
> +static int exynos_iommu_of_xlate(struct device *dev,
> +                                struct of_phandle_args *spec)
> +{
> +       struct exynos_iommu_owner *owner = dev->archdata.iommu;
> +       struct platform_device *sysmmu = of_find_device_by_node(spec->np);
> +       struct sysmmu_drvdata *data;
> +
> +       if (!sysmmu)
> +               return -ENODEV;
> +
> +       data = platform_get_drvdata(sysmmu);
> +       if (!data)
> +               return -ENODEV;
> +
> +       if (!owner) {
> +               owner = kzalloc(sizeof(*owner), GFP_KERNEL);
> +               if (!owner)
> +                       return -ENOMEM;
> +
> +               INIT_LIST_HEAD(&owner->clients);
> +               dev->archdata.iommu = owner;
> +       }
> +
> +       list_add_tail(&data->owner_node, &owner->clients);

This is the line that causes the kernel to hang, if I comment the
list_add_tail() call then the kernel boots.

I checked that neither data nor owner are NULL and that the
owner->clients list_head is initialized. Do you have any ideas what
could be happening?

Thanks a lot and best regards,
Javier

[0]: git://git.collabora.co.uk/git/user/javier/linux.git exynos-sysmmu-3.19-rc5

[PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Javier Martinez Canillas]

Hello Marek,

I wanted to test your IOMMU series on an Exynos5420 Peach Pit but the
kernel hangs with your series + dependencies on top of 3.19-rc5.

Bisecting I found that $subject is the offending commit. I've pushed
my test branch [0] in case I missed something.

On Fri, Jan 16, 2015 at 10:13 AM, Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
> This patch adds implementation of of_xlate callback, which prepares
> masters device for attaching to IOMMU. This callback is called during
> creating devices from device tree.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/iommu/exynos-iommu.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
>
> diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
> index ea2659159e63..5432b443abfc 100644
> --- a/drivers/iommu/exynos-iommu.c
> +++ b/drivers/iommu/exynos-iommu.c
> @@ -1077,6 +1077,33 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
>         return phys;
>  }
>
> +static int exynos_iommu_of_xlate(struct device *dev,
> +                                struct of_phandle_args *spec)
> +{
> +       struct exynos_iommu_owner *owner = dev->archdata.iommu;
> +       struct platform_device *sysmmu = of_find_device_by_node(spec->np);
> +       struct sysmmu_drvdata *data;
> +
> +       if (!sysmmu)
> +               return -ENODEV;
> +
> +       data = platform_get_drvdata(sysmmu);
> +       if (!data)
> +               return -ENODEV;
> +
> +       if (!owner) {
> +               owner = kzalloc(sizeof(*owner), GFP_KERNEL);
> +               if (!owner)
> +                       return -ENOMEM;
> +
> +               INIT_LIST_HEAD(&owner->clients);
> +               dev->archdata.iommu = owner;
> +       }
> +
> +       list_add_tail(&data->owner_node, &owner->clients);

This is the line that causes the kernel to hang, if I comment the
list_add_tail() call then the kernel boots.

I checked that neither data nor owner are NULL and that the
owner->clients list_head is initialized. Do you have any ideas what
could be happening?

Thanks a lot and best regards,
Javier

[0]: git://git.collabora.co.uk/git/user/javier/linux.git exynos-sysmmu-3.19-rc5

Re: [PATCH v4 17/18] iommu: exynos: init from dt-specific callback instead of initcall

[Laurent Pinchart]

Hi Will,

On Monday 19 January 2015 11:33:31 Will Deacon wrote:
> On Mon, Jan 19, 2015 at 01:11:07AM +0000, Laurent Pinchart wrote:
> > On Friday 16 January 2015 10:13:11 Marek Szyprowski wrote:
> >> This patch introduces IOMMU_OF_DECLARE-based initialization to the
> >> driver, which replaces subsys_initcall-based procedure.
> >> exynos_iommu_of_setup ensures that each sysmmu controller is probed
> >> before its master device.
> 
> [...]
> 
> >> +static int __init exynos_iommu_of_setup(struct device_node *np)
> >> +{
> >> +	struct platform_device *pdev;
> >> +
> >> +	if (!init_done)
> >> +		exynos_iommu_init();
> >> +
> >> +	pdev = of_platform_device_create(np, NULL,
> >> platform_bus_type.dev_root);
> >> +	if (IS_ERR(pdev))
> >> +		return PTR_ERR(pdev);
> > 
> > This feels like a hack to me. What happens here is that you're using the
> > IOMMU_OF_DECLARE mechanism to make sure that the iommu platform device
> > will be created and registered before the normal OF bus populate
> > mechanism kicks in, thus ensuring that the iommu gets probed before other
> > devices. In practice this is pretty similar to using different init
> > levels, which is what Will's patch set was trying to avoid in the first
> > place. Creating a new kind of init levels mechanism doesn't sound very
> > good to me.
> > 
> > The existing exynos-iommu driver is based on classic instantiation of a
> > platform device from DT, using the normal device probing mechanism. As
> > such it relies on the availability of a struct device for various helper
> > functions. I thus understand why you want a struct device being
> > registered for the iommu, instead of initializing the device right from
> > the exynos_iommu_of_setup() function without a corresponding struct
> > device being registered.
> > 
> > This leads me to question whether we should really introduce
> > IOMMU_OF_DECLARE. Using regular deferred probing seems more and more like
> > a better solution to me.
> 
> We seem to be going round and round on this argument. I said before that
> I'm not against changing this [1], but somebody would need to propose
> patches, which hasn't happened in recent history.
> 
> Arnd also makes some good arguments against using probing [2], which would
> need further discussion.
> 
> Basically, it looks like there are two sides to this argument and I don't
> see anything changing without patch proposals. The only thing that the
> current discussions seem to be achieving is blocking people like Marek,
> who are trying to make use of what we have in mainline today!

To be perfectly clear, I won't block patches here without submitting a 
counterproposal (unless there's something fundamentally wrong of course). I 
still believe the deferred probe approach should be given at least a try, but 
as I don't have time to implement that myself now, I won't try to block 
anything.

> [1]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310783.
> html
> [2]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310992.
> html

-- 
Regards,

Laurent Pinchart

[PATCH v4 17/18] iommu: exynos: init from dt-specific callback instead of initcall

[Laurent Pinchart]

Hi Will,

On Monday 19 January 2015 11:33:31 Will Deacon wrote:
> On Mon, Jan 19, 2015 at 01:11:07AM +0000, Laurent Pinchart wrote:
> > On Friday 16 January 2015 10:13:11 Marek Szyprowski wrote:
> >> This patch introduces IOMMU_OF_DECLARE-based initialization to the
> >> driver, which replaces subsys_initcall-based procedure.
> >> exynos_iommu_of_setup ensures that each sysmmu controller is probed
> >> before its master device.
> 
> [...]
> 
> >> +static int __init exynos_iommu_of_setup(struct device_node *np)
> >> +{
> >> +	struct platform_device *pdev;
> >> +
> >> +	if (!init_done)
> >> +		exynos_iommu_init();
> >> +
> >> +	pdev = of_platform_device_create(np, NULL,
> >> platform_bus_type.dev_root);
> >> +	if (IS_ERR(pdev))
> >> +		return PTR_ERR(pdev);
> > 
> > This feels like a hack to me. What happens here is that you're using the
> > IOMMU_OF_DECLARE mechanism to make sure that the iommu platform device
> > will be created and registered before the normal OF bus populate
> > mechanism kicks in, thus ensuring that the iommu gets probed before other
> > devices. In practice this is pretty similar to using different init
> > levels, which is what Will's patch set was trying to avoid in the first
> > place. Creating a new kind of init levels mechanism doesn't sound very
> > good to me.
> > 
> > The existing exynos-iommu driver is based on classic instantiation of a
> > platform device from DT, using the normal device probing mechanism. As
> > such it relies on the availability of a struct device for various helper
> > functions. I thus understand why you want a struct device being
> > registered for the iommu, instead of initializing the device right from
> > the exynos_iommu_of_setup() function without a corresponding struct
> > device being registered.
> > 
> > This leads me to question whether we should really introduce
> > IOMMU_OF_DECLARE. Using regular deferred probing seems more and more like
> > a better solution to me.
> 
> We seem to be going round and round on this argument. I said before that
> I'm not against changing this [1], but somebody would need to propose
> patches, which hasn't happened in recent history.
> 
> Arnd also makes some good arguments against using probing [2], which would
> need further discussion.
> 
> Basically, it looks like there are two sides to this argument and I don't
> see anything changing without patch proposals. The only thing that the
> current discussions seem to be achieving is blocking people like Marek,
> who are trying to make use of what we have in mainline today!

To be perfectly clear, I won't block patches here without submitting a 
counterproposal (unless there's something fundamentally wrong of course). I 
still believe the deferred probe approach should be given at least a try, but 
as I don't have time to implement that myself now, I won't try to block 
anything.

> [1]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310783.
> html
> [2]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2014-December/310992.
> html

-- 
Regards,

Laurent Pinchart

Re: [PATCH v4 00/18] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

[Tobias Jakobi]

Hello,

just some warnings I encountered when compiling this today:
drivers/iommu/exynos-iommu.c: In function ‘exynos_iommu_of_setup’:
drivers/iommu/exynos-iommu.c:1177:2: warning: passing argument 2 of
‘of_iommu_set_ops’ discards ‘const’ qualifier from pointer target type
[enabled by default]
  of_iommu_set_ops(np, &exynos_iommu_ops);
  ^
In file included from drivers/iommu/exynos-iommu.c:23:0:
include/linux/of_iommu.h:34:6: note: expected ‘struct iommu_ops *’ but
argument is of type ‘const struct iommu_ops *’
 void of_iommu_set_ops(struct device_node *np, struct iommu_ops *ops);
      ^


I guess the 'const' should be dropped from exynos_iommu_ops, even though
I wonder why of_iommu_set_ops wants a non-const pointer (can/does it
modify the struct later on?).

With best wishes,
Tobias

[PATCH v4 00/18] Exynos SYSMMU (IOMMU) integration with DT and DMA-mapping subsystem

[Tobias Jakobi]

Hello,

just some warnings I encountered when compiling this today:
drivers/iommu/exynos-iommu.c: In function ?exynos_iommu_of_setup?:
drivers/iommu/exynos-iommu.c:1177:2: warning: passing argument 2 of
?of_iommu_set_ops? discards ?const? qualifier from pointer target type
[enabled by default]
  of_iommu_set_ops(np, &exynos_iommu_ops);
  ^
In file included from drivers/iommu/exynos-iommu.c:23:0:
include/linux/of_iommu.h:34:6: note: expected ?struct iommu_ops *? but
argument is of type ?const struct iommu_ops *?
 void of_iommu_set_ops(struct device_node *np, struct iommu_ops *ops);
      ^


I guess the 'const' should be dropped from exynos_iommu_ops, even though
I wonder why of_iommu_set_ops wants a non-const pointer (can/does it
modify the struct later on?).

With best wishes,
Tobias

Re: [PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Marek Szyprowski]

Hello,

On 2015-01-19 16:27, Javier Martinez Canillas wrote:
> I wanted to test your IOMMU series on an Exynos5420 Peach Pit but the
> kernel hangs with your series + dependencies on top of 3.19-rc5.
>
> Bisecting I found that $subject is the offending commit. I've pushed
> my test branch [0] in case I missed something.
>
> On Fri, Jan 16, 2015 at 10:13 AM, Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> This patch adds implementation of of_xlate callback, which prepares
>> masters device for attaching to IOMMU. This callback is called during
>> creating devices from device tree.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>>   drivers/iommu/exynos-iommu.c | 28 ++++++++++++++++++++++++++++
>>   1 file changed, 28 insertions(+)
>>
>> diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
>> index ea2659159e63..5432b443abfc 100644
>> --- a/drivers/iommu/exynos-iommu.c
>> +++ b/drivers/iommu/exynos-iommu.c
>> @@ -1077,6 +1077,33 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
>>          return phys;
>>   }
>>
>> +static int exynos_iommu_of_xlate(struct device *dev,
>> +                                struct of_phandle_args *spec)
>> +{
>> +       struct exynos_iommu_owner *owner = dev->archdata.iommu;
>> +       struct platform_device *sysmmu = of_find_device_by_node(spec->np);
>> +       struct sysmmu_drvdata *data;
>> +
>> +       if (!sysmmu)
>> +               return -ENODEV;
>> +
>> +       data = platform_get_drvdata(sysmmu);
>> +       if (!data)
>> +               return -ENODEV;
>> +
>> +       if (!owner) {
>> +               owner = kzalloc(sizeof(*owner), GFP_KERNEL);
>> +               if (!owner)
>> +                       return -ENOMEM;
>> +
>> +               INIT_LIST_HEAD(&owner->clients);
>> +               dev->archdata.iommu = owner;
>> +       }
>> +
>> +       list_add_tail(&data->owner_node, &owner->clients);
> This is the line that causes the kernel to hang, if I comment the
> list_add_tail() call then the kernel boots.
>
> I checked that neither data nor owner are NULL and that the
> owner->clients list_head is initialized. Do you have any ideas what
> could be happening?

This is really strange. However the hang is definitely not caused by
adding the controller to the list, but rather the fact that it is later
being initialized, probably in exynos_iommu_attach_device().

Just a quick question - does bootloader on Exynos5420 Peach Pit sets
any image on the display?

If so then we will get IOMMU page fault on init (DMA engine of FIMD is
left enabled from bootloader) and such case is not yet handled.
Besides that I have no idea for any other reason for such failure.

To check if this is caused by io page fault, please temporarily add the
following hack:
--->8---
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 7864797609b3..5e70cf7eb31b 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -2011,6 +2011,9 @@ static bool arm_setup_iommu_dma_ops(struct device 
*dev, u64 dma_base, u64 size,
          return false;
      }

+    iommu_map(mapping->domain, 0x40000000, 0x40000000, 0x80000000,
+          IOMMU_READ | IOMMU_WRITE);
+
      if (arm_iommu_attach_device(dev, mapping)) {
          pr_warn("Failed to attached device %s to IOMMU_mapping\n",
                  dev_name(dev));

--->8---

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

[PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Marek Szyprowski]

Hello,

On 2015-01-19 16:27, Javier Martinez Canillas wrote:
> I wanted to test your IOMMU series on an Exynos5420 Peach Pit but the
> kernel hangs with your series + dependencies on top of 3.19-rc5.
>
> Bisecting I found that $subject is the offending commit. I've pushed
> my test branch [0] in case I missed something.
>
> On Fri, Jan 16, 2015 at 10:13 AM, Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> This patch adds implementation of of_xlate callback, which prepares
>> masters device for attaching to IOMMU. This callback is called during
>> creating devices from device tree.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>>   drivers/iommu/exynos-iommu.c | 28 ++++++++++++++++++++++++++++
>>   1 file changed, 28 insertions(+)
>>
>> diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
>> index ea2659159e63..5432b443abfc 100644
>> --- a/drivers/iommu/exynos-iommu.c
>> +++ b/drivers/iommu/exynos-iommu.c
>> @@ -1077,6 +1077,33 @@ static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
>>          return phys;
>>   }
>>
>> +static int exynos_iommu_of_xlate(struct device *dev,
>> +                                struct of_phandle_args *spec)
>> +{
>> +       struct exynos_iommu_owner *owner = dev->archdata.iommu;
>> +       struct platform_device *sysmmu = of_find_device_by_node(spec->np);
>> +       struct sysmmu_drvdata *data;
>> +
>> +       if (!sysmmu)
>> +               return -ENODEV;
>> +
>> +       data = platform_get_drvdata(sysmmu);
>> +       if (!data)
>> +               return -ENODEV;
>> +
>> +       if (!owner) {
>> +               owner = kzalloc(sizeof(*owner), GFP_KERNEL);
>> +               if (!owner)
>> +                       return -ENOMEM;
>> +
>> +               INIT_LIST_HEAD(&owner->clients);
>> +               dev->archdata.iommu = owner;
>> +       }
>> +
>> +       list_add_tail(&data->owner_node, &owner->clients);
> This is the line that causes the kernel to hang, if I comment the
> list_add_tail() call then the kernel boots.
>
> I checked that neither data nor owner are NULL and that the
> owner->clients list_head is initialized. Do you have any ideas what
> could be happening?

This is really strange. However the hang is definitely not caused by
adding the controller to the list, but rather the fact that it is later
being initialized, probably in exynos_iommu_attach_device().

Just a quick question - does bootloader on Exynos5420 Peach Pit sets
any image on the display?

If so then we will get IOMMU page fault on init (DMA engine of FIMD is
left enabled from bootloader) and such case is not yet handled.
Besides that I have no idea for any other reason for such failure.

To check if this is caused by io page fault, please temporarily add the
following hack:
--->8---
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 7864797609b3..5e70cf7eb31b 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -2011,6 +2011,9 @@ static bool arm_setup_iommu_dma_ops(struct device 
*dev, u64 dma_base, u64 size,
          return false;
      }

+    iommu_map(mapping->domain, 0x40000000, 0x40000000, 0x80000000,
+          IOMMU_READ | IOMMU_WRITE);
+
      if (arm_iommu_attach_device(dev, mapping)) {
          pr_warn("Failed to attached device %s to IOMMU_mapping\n",
                  dev_name(dev));

--->8---

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Javier Martinez Canillas]

Hello Marek,

On Fri, Jan 23, 2015 at 1:40 PM, Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>>> +
>>> +       list_add_tail(&data->owner_node, &owner->clients);
>>
>> This is the line that causes the kernel to hang, if I comment the
>> list_add_tail() call then the kernel boots.
>>
>> I checked that neither data nor owner are NULL and that the
>> owner->clients list_head is initialized. Do you have any ideas what
>> could be happening?
>
>
> This is really strange. However the hang is definitely not caused by
> adding the controller to the list, but rather the fact that it is later
> being initialized, probably in exynos_iommu_attach_device().
>

Yes, I knew adding to the list was not the issue but a side effect of
being in the list. I'm not familiar with Exynos sysmmu/iommu to figure
out though.

> Just a quick question - does bootloader on Exynos5420 Peach Pit sets
> any image on the display?
>

Yes u-boot does initialize the display, I see the boot messages and
have an u-boot prompt.

> If so then we will get IOMMU page fault on init (DMA engine of FIMD is
> left enabled from bootloader) and such case is not yet handled.
> Besides that I have no idea for any other reason for such failure.
>

I see, that's a reasonable explanation and in fact your patch makes at
least the kernel to start booting.

> To check if this is caused by io page fault, please temporarily add the
> following hack:
> --->8---
> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
> index 7864797609b3..5e70cf7eb31b 100644
> --- a/arch/arm/mm/dma-mapping.c
> +++ b/arch/arm/mm/dma-mapping.c
> @@ -2011,6 +2011,9 @@ static bool arm_setup_iommu_dma_ops(struct device
> *dev, u64 dma_base, u64 size,
>          return false;
>      }
>
> +    iommu_map(mapping->domain, 0x40000000, 0x40000000, 0x80000000,
> +          IOMMU_READ | IOMMU_WRITE);
> +
>      if (arm_iommu_attach_device(dev, mapping)) {

The kernel still hangs but the boot does indeed go further. Here is my
boot log [0] although I couldn't find an evident cause.

Best regards,
Javier

[0]: http://paste.debian.net/plain/141968

[PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Javier Martinez Canillas]

Hello Marek,

On Fri, Jan 23, 2015 at 1:40 PM, Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>>> +
>>> +       list_add_tail(&data->owner_node, &owner->clients);
>>
>> This is the line that causes the kernel to hang, if I comment the
>> list_add_tail() call then the kernel boots.
>>
>> I checked that neither data nor owner are NULL and that the
>> owner->clients list_head is initialized. Do you have any ideas what
>> could be happening?
>
>
> This is really strange. However the hang is definitely not caused by
> adding the controller to the list, but rather the fact that it is later
> being initialized, probably in exynos_iommu_attach_device().
>

Yes, I knew adding to the list was not the issue but a side effect of
being in the list. I'm not familiar with Exynos sysmmu/iommu to figure
out though.

> Just a quick question - does bootloader on Exynos5420 Peach Pit sets
> any image on the display?
>

Yes u-boot does initialize the display, I see the boot messages and
have an u-boot prompt.

> If so then we will get IOMMU page fault on init (DMA engine of FIMD is
> left enabled from bootloader) and such case is not yet handled.
> Besides that I have no idea for any other reason for such failure.
>

I see, that's a reasonable explanation and in fact your patch makes at
least the kernel to start booting.

> To check if this is caused by io page fault, please temporarily add the
> following hack:
> --->8---
> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
> index 7864797609b3..5e70cf7eb31b 100644
> --- a/arch/arm/mm/dma-mapping.c
> +++ b/arch/arm/mm/dma-mapping.c
> @@ -2011,6 +2011,9 @@ static bool arm_setup_iommu_dma_ops(struct device
> *dev, u64 dma_base, u64 size,
>          return false;
>      }
>
> +    iommu_map(mapping->domain, 0x40000000, 0x40000000, 0x80000000,
> +          IOMMU_READ | IOMMU_WRITE);
> +
>      if (arm_iommu_attach_device(dev, mapping)) {

The kernel still hangs but the boot does indeed go further. Here is my
boot log [0] although I couldn't find an evident cause.

Best regards,
Javier

[0]: http://paste.debian.net/plain/141968

Re: [PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Marek Szyprowski]

Hello Javier,

On 2015-01-23 14:48, Javier Martinez Canillas wrote:
> On Fri, Jan 23, 2015 at 1:40 PM, Marek Szyprowski
> <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
>>>> +
>>>> +       list_add_tail(&data->owner_node, &owner->clients);
>>> This is the line that causes the kernel to hang, if I comment the
>>> list_add_tail() call then the kernel boots.
>>>
>>> I checked that neither data nor owner are NULL and that the
>>> owner->clients list_head is initialized. Do you have any ideas what
>>> could be happening?
>>
>> This is really strange. However the hang is definitely not caused by
>> adding the controller to the list, but rather the fact that it is later
>> being initialized, probably in exynos_iommu_attach_device().
>>
> Yes, I knew adding to the list was not the issue but a side effect of
> being in the list. I'm not familiar with Exynos sysmmu/iommu to figure
> out though.
>
>> Just a quick question - does bootloader on Exynos5420 Peach Pit sets
>> any image on the display?
>>
> Yes u-boot does initialize the display, I see the boot messages and
> have an u-boot prompt.
>
>> If so then we will get IOMMU page fault on init (DMA engine of FIMD is
>> left enabled from bootloader) and such case is not yet handled.
>> Besides that I have no idea for any other reason for such failure.
>>
> I see, that's a reasonable explanation and in fact your patch makes at
> least the kernel to start booting.
>
>> To check if this is caused by io page fault, please temporarily add the
>> following hack:
>> --->8---
>> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
>> index 7864797609b3..5e70cf7eb31b 100644
>> --- a/arch/arm/mm/dma-mapping.c
>> +++ b/arch/arm/mm/dma-mapping.c
>> @@ -2011,6 +2011,9 @@ static bool arm_setup_iommu_dma_ops(struct device
>> *dev, u64 dma_base, u64 size,
>>           return false;
>>       }
>>
>> +    iommu_map(mapping->domain, 0x40000000, 0x40000000, 0x80000000,
>> +          IOMMU_READ | IOMMU_WRITE);
>> +
>>       if (arm_iommu_attach_device(dev, mapping)) {
> The kernel still hangs but the boot does indeed go further. Here is my
> boot log [0] although I couldn't find an evident cause.

Frankly, this freeze looks really strange, because there is no error message
or any other failure indicator.

Thanks for testing the above hack. It confirmed that the previous boot 
failure
was caused by display left enabled in bootloader. Such configuration is 
not yet
supported, although I will do my best so find how to add support for it. 
For the
time being - please don't enable IOMMU support on Exynos5420 Peach Pit. It
shouldn't be a big issue, because IOMMU support was already non-functional
all the time on Exynos platform.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

[PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Marek Szyprowski]

Hello Javier,

On 2015-01-23 14:48, Javier Martinez Canillas wrote:
> On Fri, Jan 23, 2015 at 1:40 PM, Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>>>> +
>>>> +       list_add_tail(&data->owner_node, &owner->clients);
>>> This is the line that causes the kernel to hang, if I comment the
>>> list_add_tail() call then the kernel boots.
>>>
>>> I checked that neither data nor owner are NULL and that the
>>> owner->clients list_head is initialized. Do you have any ideas what
>>> could be happening?
>>
>> This is really strange. However the hang is definitely not caused by
>> adding the controller to the list, but rather the fact that it is later
>> being initialized, probably in exynos_iommu_attach_device().
>>
> Yes, I knew adding to the list was not the issue but a side effect of
> being in the list. I'm not familiar with Exynos sysmmu/iommu to figure
> out though.
>
>> Just a quick question - does bootloader on Exynos5420 Peach Pit sets
>> any image on the display?
>>
> Yes u-boot does initialize the display, I see the boot messages and
> have an u-boot prompt.
>
>> If so then we will get IOMMU page fault on init (DMA engine of FIMD is
>> left enabled from bootloader) and such case is not yet handled.
>> Besides that I have no idea for any other reason for such failure.
>>
> I see, that's a reasonable explanation and in fact your patch makes at
> least the kernel to start booting.
>
>> To check if this is caused by io page fault, please temporarily add the
>> following hack:
>> --->8---
>> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
>> index 7864797609b3..5e70cf7eb31b 100644
>> --- a/arch/arm/mm/dma-mapping.c
>> +++ b/arch/arm/mm/dma-mapping.c
>> @@ -2011,6 +2011,9 @@ static bool arm_setup_iommu_dma_ops(struct device
>> *dev, u64 dma_base, u64 size,
>>           return false;
>>       }
>>
>> +    iommu_map(mapping->domain, 0x40000000, 0x40000000, 0x80000000,
>> +          IOMMU_READ | IOMMU_WRITE);
>> +
>>       if (arm_iommu_attach_device(dev, mapping)) {
> The kernel still hangs but the boot does indeed go further. Here is my
> boot log [0] although I couldn't find an evident cause.

Frankly, this freeze looks really strange, because there is no error message
or any other failure indicator.

Thanks for testing the above hack. It confirmed that the previous boot 
failure
was caused by display left enabled in bootloader. Such configuration is 
not yet
supported, although I will do my best so find how to add support for it. 
For the
time being - please don't enable IOMMU support on Exynos5420 Peach Pit. It
shouldn't be a big issue, because IOMMU support was already non-functional
all the time on Exynos platform.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Javier Martinez Canillas]

Hello Marek,

On Fri, Jan 23, 2015 at 5:15 PM, Marek Szyprowski
<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
>>
>>> To check if this is caused by io page fault, please temporarily add the
>>> following hack:
>>> --->8---
>>> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
>>> index 7864797609b3..5e70cf7eb31b 100644
>>> --- a/arch/arm/mm/dma-mapping.c
>>> +++ b/arch/arm/mm/dma-mapping.c
>>> @@ -2011,6 +2011,9 @@ static bool arm_setup_iommu_dma_ops(struct device
>>> *dev, u64 dma_base, u64 size,
>>>           return false;
>>>       }
>>>
>>> +    iommu_map(mapping->domain, 0x40000000, 0x40000000, 0x80000000,
>>> +          IOMMU_READ | IOMMU_WRITE);
>>> +
>>>       if (arm_iommu_attach_device(dev, mapping)) {
>>
>> The kernel still hangs but the boot does indeed go further. Here is my
>> boot log [0] although I couldn't find an evident cause.
>
>
> Frankly, this freeze looks really strange, because there is no error message
> or any other failure indicator.
>
> Thanks for testing the above hack. It confirmed that the previous boot

You are welcome

> failure
> was caused by display left enabled in bootloader. Such configuration is not
> yet
> supported, although I will do my best so find how to add support for it. For
> the

Great, thanks a lot.

> time being - please don't enable IOMMU support on Exynos5420 Peach Pit. It
> shouldn't be a big issue, because IOMMU support was already non-functional
> all the time on Exynos platform.
>

Agreed but keep in mind that CONFIG_EXYNOS_IOMMU is currently enabled
in arch/arm/configs/exynos_defconfig so you should include in your
series a patch to disable that config option to prevent the boot hang.
Or at least add a of_machine_is_compatible("google,peach") check
although I don't know if there are other Exynos machines that have the
same issue.

Best regards,
Javier

[PATCH v4 18/18] iommu: exynos: add callback for initializing devices from device tree

[Javier Martinez Canillas]

Hello Marek,

On Fri, Jan 23, 2015 at 5:15 PM, Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>>
>>> To check if this is caused by io page fault, please temporarily add the
>>> following hack:
>>> --->8---
>>> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
>>> index 7864797609b3..5e70cf7eb31b 100644
>>> --- a/arch/arm/mm/dma-mapping.c
>>> +++ b/arch/arm/mm/dma-mapping.c
>>> @@ -2011,6 +2011,9 @@ static bool arm_setup_iommu_dma_ops(struct device
>>> *dev, u64 dma_base, u64 size,
>>>           return false;
>>>       }
>>>
>>> +    iommu_map(mapping->domain, 0x40000000, 0x40000000, 0x80000000,
>>> +          IOMMU_READ | IOMMU_WRITE);
>>> +
>>>       if (arm_iommu_attach_device(dev, mapping)) {
>>
>> The kernel still hangs but the boot does indeed go further. Here is my
>> boot log [0] although I couldn't find an evident cause.
>
>
> Frankly, this freeze looks really strange, because there is no error message
> or any other failure indicator.
>
> Thanks for testing the above hack. It confirmed that the previous boot

You are welcome

> failure
> was caused by display left enabled in bootloader. Such configuration is not
> yet
> supported, although I will do my best so find how to add support for it. For
> the

Great, thanks a lot.

> time being - please don't enable IOMMU support on Exynos5420 Peach Pit. It
> shouldn't be a big issue, because IOMMU support was already non-functional
> all the time on Exynos platform.
>

Agreed but keep in mind that CONFIG_EXYNOS_IOMMU is currently enabled
in arch/arm/configs/exynos_defconfig so you should include in your
series a patch to disable that config option to prevent the boot hang.
Or at least add a of_machine_is_compatible("google,peach") check
although I don't know if there are other Exynos machines that have the
same issue.

Best regards,
Javier