From: Graeme Russ <gruss@tss-engineering.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/5] Enable booting of mx28 without battery
Date: Fri, 23 Jan 2015 19:11:08 +1100 [thread overview]
Message-ID: <54C2021C.9010604@tss-engineering.com> (raw)
In-Reply-To: <DB3PR05MB252F1D6A1521E87599A5991CB360@DB3PR05MB252.eurprd05.prod.outlook.com>
Hi Damien,
On 23/01/15 19:03, Damien GOTFROI wrote:
> Hi,
>
> I confirm, my first patch for spl_power_init.c generated DDR errors.
>
> And my new (small) patch for spl_power_init.c fixes these errors, it is not my DDR patch.
An I can confirm that your smaller patch allows me to boot the G2C1
board. I'll just implement the smaller patch - we can tackle the rest later
Thanks for your very helpful experimentation
Regards,
Graeme
>
> Many thanks and best regards,
>
>
> Damien Gotfroi
> Electronics Engineer
> GreenWatch S.A.
> Avenue Lavoisier, 18A
> B-1300 Wavre
> Tel. + 32 (0) 10 471 367
> dgotfroi at greenwatch.be
> www.greenwatch.be
> BCE: 0820 144 205
>
> Retrouvez l?actu des th?matiques ?nerg?tiques sur notre blog
>
>
> ? Please consider the environment before printing this mail note.
> ? Ce message ?lectronique et ses ?ventuels fichiers attach?s est(sont) destin?(s) ? l?usage exclusif de la (les) personne(s) mentionn?e(s) comme destinataire. Si vous recevez ce message ?lectronique par erreur, vous n??tes pas autoris? ? utiliser ; d?voiler ; distribuer ; imprimer ou copier tout ou partie de ce message si vous n?en ?tes pas le destinataire. GreenWatch d?cline toute responsabilit? pour tout dommage direct ou indirect li? ? l?utilisation inappropri?e ou frauduleuse de ce message ?lectronique par des personnes non autoris?es. En outre, les informations contenues dans ce message ?lectronique sont ? caract?re exclusivement informatif et GreenWatch ne saurait en garantir l?exactitude ou l? exhaustivit? .Les pr?judices occasionn?s par l?utilisation d?une information erron?e ou incompl?te n?entra?nent en aucun cas la responsabilit? de GreenWatch ?
>
> -----Original Message-----
> From: Graeme Russ [mailto:gruss at tss-engineering.com]
> Sent: vendredi 23 janvier 2015 05:15
> To: Fabio Estevam
> Cc: U-Boot-Denx; Fabio Estevam; M?rten Wikman; Damien GOTFROI; Stefano Babic; Marek Va?ut
> Subject: Re: [U-Boot] [PATCH 2/5] Enable booting of mx28 without battery
>
> Hi Fabio,
>
> On 23/01/15 14:49, Fabio Estevam wrote:
>> On Fri, Jan 23, 2015 at 1:27 AM, Graeme Russ <gruss@tss-engineering.com> wrote:
>>
>>> I thought the DDR errors were fixed with Damien's DDR patch. Damien,
>>> can you please confirm?
>>
>> His response in the forum was:
>>
>> "About the patch posted on January, 6th, you can simply delete it,
>> and empty your recycle bin . It generate DDR errors (I searched a long
>> time in spl_mem_init to find why my DDR was not stable, but it was not
>> a DDR configuration mistake, but a power mistake caused by my patch)."
>
> Ah - I missed that - my bad.
>
> I'll check if his newer patch works. If it does, I'll implement it instead. Best to make these kind of changes one small step at a time :)
>
> Regards,
>
>
> Graeme
>
next prev parent reply other threads:[~2015-01-23 8:11 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 11:55 [U-Boot] [PATCH 0/5] Add support for G2C1 mx28 board (which has no battery) Graeme Russ
2015-01-21 11:55 ` [U-Boot] [PATCH 1/5] Add debug output to mx29 SPL source files Graeme Russ
2015-01-21 20:49 ` Fabio Estevam
2015-01-21 23:24 ` Marek Vasut
2015-01-22 4:24 ` Graeme Russ
2015-01-21 11:55 ` [U-Boot] [PATCH 2/5] Enable booting of mx28 without battery Graeme Russ
2015-01-21 12:03 ` Graeme Russ
2015-01-21 21:08 ` Fabio Estevam
2015-01-21 23:27 ` Marek Vasut
2015-01-23 0:58 ` Graeme Russ
2015-01-22 12:42 ` Fabio Estevam
2015-01-22 13:51 ` Marek Vasut
2015-01-23 2:58 ` Graeme Russ
2015-01-23 3:01 ` Fabio Estevam
2015-01-23 3:27 ` Graeme Russ
2015-01-23 3:49 ` Fabio Estevam
2015-01-23 4:14 ` Graeme Russ
[not found] ` <DB3PR05MB252F1D6A1521E87599A5991CB360@DB3PR05MB252.eurprd05.prod.outlook.com>
2015-01-23 8:11 ` Graeme Russ [this message]
2015-01-23 13:01 ` Stefano Babic
2015-01-21 11:55 ` [U-Boot] [PATCH 3/5] Add 'Wait for JTAG user' if booted in JTAG mode Graeme Russ
2015-01-21 15:35 ` Stefan Roese
2015-01-21 11:55 ` [U-Boot] [PATCH 4/5] Move PLL power-up from power init to memory init Graeme Russ
2015-01-21 23:33 ` Marek Vasut
2015-01-21 11:55 ` [U-Boot] [PATCH 5/5] Add support for ReachTech G2C1 board Graeme Russ
2015-01-21 20:53 ` Fabio Estevam
2015-01-21 23:03 ` Marek Vasut
2015-01-22 4:21 ` Graeme Russ
2015-01-21 23:36 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54C2021C.9010604@tss-engineering.com \
--to=gruss@tss-engineering.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.