[PATCH 3.10 00/32] 3.10.67-stable review

[PATCH 3.10 00/32] 3.10.67-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.10.67 release.
There are 32 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Jan 30 01:26:04 UTC 2015.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.10.67-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.10.67-rc1

NeilBrown <neilb@suse.de>
    md/raid5: fetch_block must fetch all the blocks handle_stripe_dirtying wants.

Jan Kara <jack@suse.cz>
    ext4: fix warning in ext4_da_update_reserve_space()

Jan Kara <jack@suse.cz>
    quota: provide interface for readding allocated space into reserved space

Mathias Krause <minipli@googlemail.com>
    crypto: add missing crypto module aliases

Kees Cook <keescook@chromium.org>
    crypto: include crypto- module prefix in template

Kees Cook <keescook@chromium.org>
    crypto: prefix module autoloading with "crypto-"

Lars Ellenberg <lars.ellenberg@linbit.com>
    drbd: merge_bvec_fn: properly remap bvm->bi_bdev

David Vrabel <david.vrabel@citrix.com>
    Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"

Dan Carpenter <dan.carpenter@oracle.com>
    ipvs: uninitialized data with IP_VS_IPV6

Sasha Levin <sasha.levin@oracle.com>
    KEYS: close race between key lookup and freeing

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    sata_dwc_460ex: fix resource leak on error path

Andy Lutomirski <luto@amacapital.net>
    x86/asm/traps: Disable tracing and kprobes in fixup_bad_iret and sync_regs

Andy Lutomirski <luto@amacapital.net>
    x86, tls: Interpret an all-zero struct user_desc as "no segment"

Andy Lutomirski <luto@amacapital.net>
    x86, tls, ldt: Stop checking lm in LDT_empty

Nadav Amit <nadav.amit@gmail.com>
    KVM: x86: Fix of previously incomplete fix for CVE-2014-8480

Alexandre Demers <alexandre.f.demers@gmail.com>
    x86/tsc: Change Fast TSC calibration failed from error to info

K. Y. Srinivasan <kys@microsoft.com>
    x86, hyperv: Mark the Hyper-V clocksource as being continuous

Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
    clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write

Oliver Hartkopp <socketcan@hartkopp.net>
    can: dev: fix crtlmode_supported check

Andrew Lunn <andrew@lunn.ch>
    bus: mvebu-mbus: fix support of MBus window 13

Fabio Estevam <fabio.estevam@freescale.com>
    ARM: dts: imx25: Fix PWM "per" clocks

Sasha Levin <sasha.levin@oracle.com>
    time: adjtimex: Validate the ADJ_FREQUENCY values

Sasha Levin <sasha.levin@oracle.com>
    time: settimeofday: Validate the values of tv from user

Joe Thornber <ejt@redhat.com>
    dm cache: share cache-metadata object across inactive and active DM tables

Brian King <brking@linux.vnet.ibm.com>
    ipr: wait for aborted command responses

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES

Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
    scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore

Jason Lee Cragg <jcragg@gmail.com>
    ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210

David Jeffery <djeffery@redhat.com>
    libata: prevent HSM state change race between ISR and PIO

Jim Lin <jilin@nvidia.com>
    pinctrl: Fix two deadlocks

Johan Hovold <johan@kernel.org>
    gpio: sysfs: fix gpio device-attribute leak

Johan Hovold <johan@kernel.org>
    gpio: sysfs: fix gpio-chip device-attribute leak


-------------

Diffstat:

 Makefile                                   |   4 +-
 arch/arm/boot/dts/imx25.dtsi               |   8 +--
 arch/arm/crypto/aes_glue.c                 |   4 +-
 arch/arm/crypto/sha1_glue.c                |   2 +-
 arch/powerpc/crypto/sha1.c                 |   3 +-
 arch/s390/crypto/aes_s390.c                |   2 +-
 arch/s390/crypto/des_s390.c                |   4 +-
 arch/s390/crypto/ghash_s390.c              |   2 +-
 arch/s390/crypto/sha1_s390.c               |   2 +-
 arch/s390/crypto/sha256_s390.c             |   4 +-
 arch/s390/crypto/sha512_s390.c             |   4 +-
 arch/sparc/crypto/aes_glue.c               |   2 +-
 arch/sparc/crypto/camellia_glue.c          |   2 +-
 arch/sparc/crypto/crc32c_glue.c            |   2 +-
 arch/sparc/crypto/des_glue.c               |   2 +-
 arch/sparc/crypto/md5_glue.c               |   2 +-
 arch/sparc/crypto/sha1_glue.c              |   2 +-
 arch/sparc/crypto/sha256_glue.c            |   4 +-
 arch/sparc/crypto/sha512_glue.c            |   4 +-
 arch/x86/crypto/aes_glue.c                 |   4 +-
 arch/x86/crypto/aesni-intel_glue.c         |   2 +-
 arch/x86/crypto/blowfish_avx2_glue.c       |   4 +-
 arch/x86/crypto/blowfish_glue.c            |   4 +-
 arch/x86/crypto/camellia_aesni_avx2_glue.c |   4 +-
 arch/x86/crypto/camellia_aesni_avx_glue.c  |   4 +-
 arch/x86/crypto/camellia_glue.c            |   4 +-
 arch/x86/crypto/cast5_avx_glue.c           |   2 +-
 arch/x86/crypto/cast6_avx_glue.c           |   2 +-
 arch/x86/crypto/crc32-pclmul_glue.c        |   4 +-
 arch/x86/crypto/crc32c-intel_glue.c        |   4 +-
 arch/x86/crypto/fpu.c                      |   3 +
 arch/x86/crypto/ghash-clmulni-intel_glue.c |   2 +-
 arch/x86/crypto/salsa20_glue.c             |   4 +-
 arch/x86/crypto/serpent_avx2_glue.c        |   4 +-
 arch/x86/crypto/serpent_avx_glue.c         |   2 +-
 arch/x86/crypto/serpent_sse2_glue.c        |   2 +-
 arch/x86/crypto/sha1_ssse3_glue.c          |   2 +-
 arch/x86/crypto/sha256_ssse3_glue.c        |   2 +-
 arch/x86/crypto/sha512_ssse3_glue.c        |   2 +-
 arch/x86/crypto/twofish_avx2_glue.c        |   4 +-
 arch/x86/crypto/twofish_avx_glue.c         |   2 +-
 arch/x86/crypto/twofish_glue.c             |   4 +-
 arch/x86/crypto/twofish_glue_3way.c        |   4 +-
 arch/x86/include/asm/desc.h                |  20 ++++--
 arch/x86/kernel/cpu/mshyperv.c             |   1 +
 arch/x86/kernel/tls.c                      |  25 ++++++-
 arch/x86/kernel/traps.c                    |   4 +-
 arch/x86/kernel/tsc.c                      |   2 +-
 arch/x86/kvm/emulate.c                     |   4 +-
 crypto/842.c                               |   1 +
 crypto/aes_generic.c                       |   3 +-
 crypto/algapi.c                            |   4 +-
 crypto/ansi_cprng.c                        |   3 +-
 crypto/anubis.c                            |   1 +
 crypto/api.c                               |   4 +-
 crypto/arc4.c                              |   1 +
 crypto/authenc.c                           |   1 +
 crypto/authencesn.c                        |   1 +
 crypto/blowfish_generic.c                  |   3 +-
 crypto/camellia_generic.c                  |   3 +-
 crypto/cast5_generic.c                     |   3 +-
 crypto/cast6_generic.c                     |   3 +-
 crypto/cbc.c                               |   1 +
 crypto/ccm.c                               |   5 +-
 crypto/chainiv.c                           |   1 +
 crypto/cmac.c                              |   1 +
 crypto/crc32.c                             |   1 +
 crypto/cryptd.c                            |   1 +
 crypto/crypto_null.c                       |   6 +-
 crypto/ctr.c                               |   3 +-
 crypto/cts.c                               |   1 +
 crypto/deflate.c                           |   2 +-
 crypto/des_generic.c                       |   7 +-
 crypto/ecb.c                               |   1 +
 crypto/eseqiv.c                            |   1 +
 crypto/fcrypt.c                            |   1 +
 crypto/gcm.c                               |   7 +-
 crypto/ghash-generic.c                     |   3 +-
 crypto/hmac.c                              |   1 +
 crypto/khazad.c                            |   1 +
 crypto/krng.c                              |   3 +-
 crypto/lrw.c                               |   1 +
 crypto/lzo.c                               |   1 +
 crypto/md4.c                               |   2 +-
 crypto/md5.c                               |   1 +
 crypto/michael_mic.c                       |   1 +
 crypto/pcbc.c                              |   1 +
 crypto/pcrypt.c                            |   1 +
 crypto/rmd128.c                            |   1 +
 crypto/rmd160.c                            |   1 +
 crypto/rmd256.c                            |   1 +
 crypto/rmd320.c                            |   1 +
 crypto/salsa20_generic.c                   |   3 +-
 crypto/seed.c                              |   1 +
 crypto/seqiv.c                             |   1 +
 crypto/serpent_generic.c                   |   5 +-
 crypto/sha1_generic.c                      |   3 +-
 crypto/sha256_generic.c                    |   6 +-
 crypto/sha512_generic.c                    |   6 +-
 crypto/tea.c                               |   5 +-
 crypto/tgr192.c                            |   5 +-
 crypto/twofish_generic.c                   |   3 +-
 crypto/vmac.c                              |   1 +
 crypto/wp512.c                             |   5 +-
 crypto/xcbc.c                              |   1 +
 crypto/xts.c                               |   1 +
 crypto/zlib.c                              |   1 +
 drivers/ata/libata-sff.c                   |  12 ++++
 drivers/ata/sata_dwc_460ex.c               |  26 ++++----
 drivers/block/drbd/drbd_req.c              |   1 +
 drivers/bus/mvebu-mbus.c                   |  13 ++++
 drivers/clocksource/exynos_mct.c           |   4 +-
 drivers/crypto/padlock-aes.c               |   2 +-
 drivers/crypto/padlock-sha.c               |   8 +--
 drivers/crypto/ux500/cryp/cryp_core.c      |   4 +-
 drivers/crypto/ux500/hash/hash_core.c      |   8 +--
 drivers/gpio/gpiolib.c                     |  24 ++++---
 drivers/gpu/drm/i915/i915_gem.c            |   2 +-
 drivers/md/dm-cache-metadata.c             | 101 +++++++++++++++++++++++++++--
 drivers/md/raid5.c                         |   3 +-
 drivers/net/can/dev.c                      |   8 ++-
 drivers/pinctrl/core.c                     |   5 +-
 drivers/s390/crypto/ap_bus.c               |   1 +
 drivers/scsi/ipr.c                         |  92 ++++++++++++++++++++++++++
 drivers/scsi/ipr.h                         |   1 +
 drivers/xen/swiotlb-xen.c                  |   2 +-
 fs/ext4/ext4.h                             |   1 +
 fs/ext4/extents.c                          |   3 +-
 fs/ext4/mballoc.c                          |  21 ++++--
 fs/quota/dquot.c                           |  46 +++++++++++++
 fs/stat.c                                  |  11 +++-
 include/linux/crypto.h                     |  13 ++++
 include/linux/fs.h                         |   1 +
 include/linux/quotaops.h                   |  15 +++++
 include/linux/time.h                       |  13 ++++
 kernel/time.c                              |   4 ++
 kernel/time/ntp.c                          |   7 ++
 net/netfilter/ipvs/ip_vs_ftp.c             |  10 +--
 scripts/recordmcount.pl                    |   1 -
 security/keys/gc.c                         |   4 +-
 sound/usb/mixer.c                          |   1 +
 141 files changed, 613 insertions(+), 182 deletions(-)

[PATCH 3.10 01/32] gpio: sysfs: fix gpio-chip device-attribute leak

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 121b6a79955a3a3fd7bbb9b8cb88d5b9dad6283d upstream.

The gpio-chip device attributes were never destroyed when the device was
removed.

Fix by using device_create_with_groups() to create the device attributes
of the chip class device.

Note that this also fixes the attribute-creation race with userspace.

Fixes: d8f388d8dc8d ("gpio: sysfs interface")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>



---
 drivers/gpio/gpiolib.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -627,7 +627,7 @@ static ssize_t chip_ngpio_show(struct de
 }
 static DEVICE_ATTR(ngpio, 0444, chip_ngpio_show, NULL);
 
-static const struct attribute *gpiochip_attrs[] = {
+static struct attribute *gpiochip_attrs[] = {
 	&dev_attr_base.attr,
 	&dev_attr_label.attr,
 	&dev_attr_ngpio.attr,
@@ -635,7 +635,7 @@ static const struct attribute *gpiochip_
 };
 
 static const struct attribute_group gpiochip_attr_group = {
-	.attrs = (struct attribute **) gpiochip_attrs,
+	.attrs = gpiochip_attrs,
 };
 
 /*
@@ -1036,6 +1036,7 @@ static void gpiochip_unexport(struct gpi
 	mutex_lock(&sysfs_lock);
 	dev = class_find_device(&gpio_class, NULL, chip, match_export);
 	if (dev) {
+		sysfs_remove_group(&dev->kobj, &gpiochip_attr_group);
 		put_device(dev);
 		device_unregister(dev);
 		chip->exported = 0;

[PATCH 3.10 02/32] gpio: sysfs: fix gpio device-attribute leak

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 0915e6feb38de8d3601819992a5bd050201a56fa upstream.

The gpio device attributes were never destroyed when the gpio was
unexported (or on export failures).

Use device_create_with_groups() to create the default device attributes
of the gpio class device. Note that this also fixes the
attribute-creation race with userspace for these attributes.

Remove contingent attributes in export error path and on unexport.

Fixes: d8f388d8dc8d ("gpio: sysfs interface")
Cc: stable <stable@vger.kernel.org> # v2.6.27+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[johan: fix leaks without device_create_with_groups, which wasn't
introduced until 3.11 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib.c |   19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -362,7 +362,7 @@ static ssize_t gpio_value_store(struct d
 	return status;
 }
 
-static const DEVICE_ATTR(value, 0644,
+static DEVICE_ATTR(value, 0644,
 		gpio_value_show, gpio_value_store);
 
 static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
@@ -580,17 +580,17 @@ static ssize_t gpio_active_low_store(str
 	return status ? : size;
 }
 
-static const DEVICE_ATTR(active_low, 0644,
+static DEVICE_ATTR(active_low, 0644,
 		gpio_active_low_show, gpio_active_low_store);
 
-static const struct attribute *gpio_attrs[] = {
+static struct attribute *gpio_attrs[] = {
 	&dev_attr_value.attr,
 	&dev_attr_active_low.attr,
 	NULL,
 };
 
 static const struct attribute_group gpio_attr_group = {
-	.attrs = (struct attribute **) gpio_attrs,
+       .attrs = gpio_attrs,
 };
 
 /*
@@ -806,20 +806,24 @@ static int gpiod_export(struct gpio_desc
 	if (direction_may_change) {
 		status = device_create_file(dev, &dev_attr_direction);
 		if (status)
-			goto fail_unregister_device;
+			goto fail_remove_attr_group;
 	}
 
 	if (gpiod_to_irq(desc) >= 0 && (direction_may_change ||
 				       !test_bit(FLAG_IS_OUT, &desc->flags))) {
 		status = device_create_file(dev, &dev_attr_edge);
 		if (status)
-			goto fail_unregister_device;
+			goto fail_remove_attr_direction;
 	}
 
 	set_bit(FLAG_EXPORT, &desc->flags);
 	mutex_unlock(&sysfs_lock);
 	return 0;
 
+fail_remove_attr_direction:
+	device_remove_file(dev, &dev_attr_direction);
+fail_remove_attr_group:
+	sysfs_remove_group(&dev->kobj, &gpio_attr_group);
 fail_unregister_device:
 	device_unregister(dev);
 fail_unlock:
@@ -962,6 +966,9 @@ static void gpiod_unexport(struct gpio_d
 
 		dev = class_find_device(&gpio_class, NULL, desc, match_export);
 		if (dev) {
+			device_remove_file(dev, &dev_attr_edge);
+			device_remove_file(dev, &dev_attr_direction);
+			sysfs_remove_group(&dev->kobj, &gpio_attr_group);
 			gpio_setup_irq(desc, dev, 0);
 			clear_bit(FLAG_EXPORT, &desc->flags);
 		} else

[PATCH 3.10 03/32] pinctrl: Fix two deadlocks

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Lin <jilin@nvidia.com>

commit db93facfb0ef542aa5d8079e47580b3e669a4d82 upstream.

This patch is to fix two deadlock cases.
Deadlock 1:
CPU #1
 pinctrl_register-> pinctrl_get ->
 create_pinctrl
 (Holding lock pinctrl_maps_mutex)
 -> get_pinctrl_dev_from_devname
 (Trying to acquire lock pinctrldev_list_mutex)
CPU #0
 pinctrl_unregister
 (Holding lock pinctrldev_list_mutex)
 -> pinctrl_put ->> pinctrl_free ->
 pinctrl_dt_free_maps -> pinctrl_unregister_map
 (Trying to acquire lock pinctrl_maps_mutex)

Simply to say
CPU#1 is holding lock A and trying to acquire lock B,
CPU#0 is holding lock B and trying to acquire lock A.

Deadlock 2:
CPU #3
 pinctrl_register-> pinctrl_get ->
 create_pinctrl
 (Holding lock pinctrl_maps_mutex)
 -> get_pinctrl_dev_from_devname
 (Trying to acquire lock pinctrldev_list_mutex)
CPU #2
 pinctrl_unregister
 (Holding lock pctldev->mutex)
 -> pinctrl_put ->> pinctrl_free ->
 pinctrl_dt_free_maps -> pinctrl_unregister_map
 (Trying to acquire lock pinctrl_maps_mutex)
CPU #0
 tegra_gpio_request
 (Holding lock pinctrldev_list_mutex)
 -> pinctrl_get_device_gpio_range
 (Trying to acquire lock pctldev->mutex)

Simply to say
CPU#3 is holding lock A and trying to acquire lock D,
CPU#2 is holding lock B and trying to acquire lock A,
CPU#0 is holding lock D and trying to acquire lock B.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/core.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1693,14 +1693,15 @@ void pinctrl_unregister(struct pinctrl_d
 	if (pctldev == NULL)
 		return;
 
-	mutex_lock(&pinctrldev_list_mutex);
 	mutex_lock(&pctldev->mutex);
-
 	pinctrl_remove_device_debugfs(pctldev);
+	mutex_unlock(&pctldev->mutex);
 
 	if (!IS_ERR(pctldev->p))
 		pinctrl_put(pctldev->p);
 
+	mutex_lock(&pinctrldev_list_mutex);
+	mutex_lock(&pctldev->mutex);
 	/* TODO: check that no pinmuxes are still active? */
 	list_del(&pctldev->node);
 	/* Destroy descriptor tree */

[PATCH 3.10 04/32] libata: prevent HSM state change race between ISR and PIO

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Jeffery <djeffery@redhat.com>

commit ce7514526742c0898b837d4395f515b79dfb5a12 upstream.

It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to
HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE
and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().

This problem is hard to reproduce making this patch hard to verify, but this
fix will prevent the race.

I have not been able to reproduce the problem, but here is a crash dump from
a 2.6.32 kernel.

On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE:

crash> struct ata_port.hsm_task_state ffff881c1121c000
  hsm_task_state = 0

Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(),
which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value.

PID: 11053  TASK: ffff8816e846cae0  CPU: 0   COMMAND: "sshd"
 #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b
 #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92
 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510
 #3 [ffff88008ba03ac0] die at ffffffff81010e0b
 #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74
 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95
 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b
    [exception RIP: ata_sff_hsm_move+317]
    RIP: ffffffff813a77ad  RSP: ffff88008ba03ca0  RFLAGS: 00010097
    RAX: 0000000000000000  RBX: ffff881c1121dc60  RCX: 0000000000000000
    RDX: ffff881c1121dd10  RSI: ffff881c1121dc60  RDI: ffff881c1121c000
    RBP: ffff88008ba03d00   R8: 0000000000000000   R9: 000000000000002e
    R10: 000000000001003f  R11: 000000000000009b  R12: ffff881c1121c000
    R13: 0000000000000000  R14: 0000000000000050  R15: ffff881c1121dd78
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd
 #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e
 #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0
---
 drivers/ata/libata-sff.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1333,7 +1333,19 @@ void ata_sff_flush_pio_task(struct ata_p
 	DPRINTK("ENTER\n");
 
 	cancel_delayed_work_sync(&ap->sff_pio_task);
+
+	/*
+	 * We wanna reset the HSM state to IDLE.  If we do so without
+	 * grabbing the port lock, critical sections protected by it which
+	 * expect the HSM state to stay stable may get surprised.  For
+	 * example, we may set IDLE in between the time
+	 * __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls
+	 * ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().
+	 */
+	spin_lock_irq(ap->lock);
 	ap->hsm_task_state = HSM_ST_IDLE;
+	spin_unlock_irq(ap->lock);
+
 	ap->sff_pio_task_link = NULL;
 
 	if (ata_msg_ctl(ap))

[PATCH 3.10 05/32] ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Lee Cragg <jcragg@gmail.com>

commit 6455931186bff407493135e74c5f32efd30860e2 upstream.

Signed-off-by: Jason Lee Cragg <jcragg@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -886,6 +886,7 @@ static void volume_control_quirks(struct
 	case USB_ID(0x046d, 0x0807): /* Logitech Webcam C500 */
 	case USB_ID(0x046d, 0x0808):
 	case USB_ID(0x046d, 0x0809):
+	case USB_ID(0x046d, 0x0819): /* Logitech Webcam C210 */
 	case USB_ID(0x046d, 0x081b): /* HD Webcam c310 */
 	case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
 	case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */

[PATCH 3.10 06/32] scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

commit 1caf6aaaa47471831d77c75f094d4e00ad1ec808 upstream.

Compiling SH with gcc-4.8 fails due to the -m32 option not being
supported.

>From http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.16.7-ckt4-1&stamp=1421425783

      CC      init/main.o
    gcc-4.8: error: unrecognized command line option '-m32'
    ld: cannot find init/.tmp_mc_main.o: No such file or directory
    objcopy: 'init/.tmp_mx_main.o': No such file
    rm: cannot remove 'init/.tmp_mx_main.o': No such file or directory
    rm: cannot remove 'init/.tmp_mc_main.o': No such file or directory

Link: http://lkml.kernel.org/r/1421537778-29001-1-git-send-email-kernel@mkarcher.dialup.fu-berlin.de
Link: http://lkml.kernel.org/r/54BCBDD4.10102@physik.fu-berlin.de

Cc: Matt Fleming <matt@console-pimps.org>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 scripts/recordmcount.pl |    1 -
 1 file changed, 1 deletion(-)

--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -262,7 +262,6 @@ if ($arch eq "x86_64") {
     # force flags for this arch
     $ld .= " -m shlelf_linux";
     $objcopy .= " -O elf32-sh-linux";
-    $cc .= " -m32";
 
 } elsif ($arch eq "powerpc") {
     $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";

[PATCH 3.10 06/32] scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

commit 1caf6aaaa47471831d77c75f094d4e00ad1ec808 upstream.

Compiling SH with gcc-4.8 fails due to the -m32 option not being
supported.

>>From http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.16.7-ckt4-1&stamp=1421425783

      CC      init/main.o
    gcc-4.8: error: unrecognized command line option '-m32'
    ld: cannot find init/.tmp_mc_main.o: No such file or directory
    objcopy: 'init/.tmp_mx_main.o': No such file
    rm: cannot remove 'init/.tmp_mx_main.o': No such file or directory
    rm: cannot remove 'init/.tmp_mc_main.o': No such file or directory

Link: http://lkml.kernel.org/r/1421537778-29001-1-git-send-email-kernel@mkarcher.dialup.fu-berlin.de
Link: http://lkml.kernel.org/r/54BCBDD4.10102@physik.fu-berlin.de

Cc: Matt Fleming <matt@console-pimps.org>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 scripts/recordmcount.pl |    1 -
 1 file changed, 1 deletion(-)

--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -262,7 +262,6 @@ if ($arch eq "x86_64") {
     # force flags for this arch
     $ld .= " -m shlelf_linux";
     $objcopy .= " -O elf32-sh-linux";
-    $cc .= " -m32";
 
 } elsif ($arch eq "powerpc") {
     $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";

[PATCH 3.10 07/32] drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 226e5ae9e5f9108beb0bde4ac69f68fe6210fed9 upstream.

If CONFIG_DEBUG_MUTEXES is set, the mutex->owner field is only cleared
if the mutex debugging is enabled which introduces a race in our
mutex_is_locked_by() - i.e. we may inspect the old owner value before it
is acquired by the new task.

This is the root cause of this error:

# diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c
# index 5cf6731..3ef3736 100644
# --- a/kernel/locking/mutex-debug.c
# +++ b/kernel/locking/mutex-debug.c
# @@ -80,13 +80,13 @@ void debug_mutex_unlock(struct mutex *lock)
# 			DEBUG_LOCKS_WARN_ON(lock->owner != current);
#
# 		DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next);
# -		mutex_clear_owner(lock);
# 	}
#
# 	/*
# 	 * __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug
# 	 * mutexes so that we can do it here after we've verified state.
# 	 */
# +	mutex_clear_owner(lock);
# 	atomic_set(&lock->count, 1);
#  }

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87955
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4449,7 +4449,7 @@ static bool mutex_is_locked_by(struct mu
 	if (!mutex_is_locked(mutex))
 		return false;
 
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_MUTEXES)
+#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES)
 	return mutex->owner == task;
 #else
 	/* Since UP may be pre-empted, we cannot assume that we own the lock */

[PATCH 3.10 08/32] ipr: wait for aborted command responses

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian King <brking@linux.vnet.ibm.com>

commit 6cdb08172bc89f0a39e1643c5e7eab362692fd1b upstream.

Fixes a race condition in abort handling that was injected
when multiple interrupt support was added. When only a single
interrupt is present, the adapter guarantees it will send
responses for aborted commands prior to the response for the
abort command itself. With multiple interrupts, these responses
generally come back on different interrupts, so we need to
ensure the abort thread waits until the aborted command is
complete so we don't perform a double completion. This race
condition was being hit frequently in environments which
were triggering command timeouts, which was resulting in
a double completion causing a kernel oops.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/ipr.c |   92 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ipr.h |    1 
 2 files changed, 93 insertions(+)

--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -645,6 +645,7 @@ static void ipr_init_ipr_cmnd(struct ipr
 	ipr_reinit_ipr_cmnd(ipr_cmd);
 	ipr_cmd->u.scratch = 0;
 	ipr_cmd->sibling = NULL;
+	ipr_cmd->eh_comp = NULL;
 	ipr_cmd->fast_done = fast_done;
 	init_timer(&ipr_cmd->timer);
 }
@@ -810,6 +811,8 @@ static void ipr_scsi_eh_done(struct ipr_
 
 	scsi_dma_unmap(ipr_cmd->scsi_cmd);
 	scsi_cmd->scsi_done(scsi_cmd);
+	if (ipr_cmd->eh_comp)
+		complete(ipr_cmd->eh_comp);
 	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 }
 
@@ -4767,6 +4770,84 @@ static int ipr_slave_alloc(struct scsi_d
 	return rc;
 }
 
+/**
+ * ipr_match_lun - Match function for specified LUN
+ * @ipr_cmd:	ipr command struct
+ * @device:		device to match (sdev)
+ *
+ * Returns:
+ *	1 if command matches sdev / 0 if command does not match sdev
+ **/
+static int ipr_match_lun(struct ipr_cmnd *ipr_cmd, void *device)
+{
+	if (ipr_cmd->scsi_cmd && ipr_cmd->scsi_cmd->device == device)
+		return 1;
+	return 0;
+}
+
+/**
+ * ipr_wait_for_ops - Wait for matching commands to complete
+ * @ipr_cmd:	ipr command struct
+ * @device:		device to match (sdev)
+ * @match:		match function to use
+ *
+ * Returns:
+ *	SUCCESS / FAILED
+ **/
+static int ipr_wait_for_ops(struct ipr_ioa_cfg *ioa_cfg, void *device,
+			    int (*match)(struct ipr_cmnd *, void *))
+{
+	struct ipr_cmnd *ipr_cmd;
+	int wait;
+	unsigned long flags;
+	struct ipr_hrr_queue *hrrq;
+	signed long timeout = IPR_ABORT_TASK_TIMEOUT;
+	DECLARE_COMPLETION_ONSTACK(comp);
+
+	ENTER;
+	do {
+		wait = 0;
+
+		for_each_hrrq(hrrq, ioa_cfg) {
+			spin_lock_irqsave(hrrq->lock, flags);
+			list_for_each_entry(ipr_cmd, &hrrq->hrrq_pending_q, queue) {
+				if (match(ipr_cmd, device)) {
+					ipr_cmd->eh_comp = &comp;
+					wait++;
+				}
+			}
+			spin_unlock_irqrestore(hrrq->lock, flags);
+		}
+
+		if (wait) {
+			timeout = wait_for_completion_timeout(&comp, timeout);
+
+			if (!timeout) {
+				wait = 0;
+
+				for_each_hrrq(hrrq, ioa_cfg) {
+					spin_lock_irqsave(hrrq->lock, flags);
+					list_for_each_entry(ipr_cmd, &hrrq->hrrq_pending_q, queue) {
+						if (match(ipr_cmd, device)) {
+							ipr_cmd->eh_comp = NULL;
+							wait++;
+						}
+					}
+					spin_unlock_irqrestore(hrrq->lock, flags);
+				}
+
+				if (wait)
+					dev_err(&ioa_cfg->pdev->dev, "Timed out waiting for aborted commands\n");
+				LEAVE;
+				return wait ? FAILED : SUCCESS;
+			}
+		}
+	} while (wait);
+
+	LEAVE;
+	return SUCCESS;
+}
+
 static int ipr_eh_host_reset(struct scsi_cmnd *cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg;
@@ -4985,11 +5066,17 @@ static int __ipr_eh_dev_reset(struct scs
 static int ipr_eh_dev_reset(struct scsi_cmnd *cmd)
 {
 	int rc;
+	struct ipr_ioa_cfg *ioa_cfg;
+
+	ioa_cfg = (struct ipr_ioa_cfg *) cmd->device->host->hostdata;
 
 	spin_lock_irq(cmd->device->host->host_lock);
 	rc = __ipr_eh_dev_reset(cmd);
 	spin_unlock_irq(cmd->device->host->host_lock);
 
+	if (rc == SUCCESS)
+		rc = ipr_wait_for_ops(ioa_cfg, cmd->device, ipr_match_lun);
+
 	return rc;
 }
 
@@ -5167,13 +5254,18 @@ static int ipr_eh_abort(struct scsi_cmnd
 {
 	unsigned long flags;
 	int rc;
+	struct ipr_ioa_cfg *ioa_cfg;
 
 	ENTER;
 
+	ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
+
 	spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags);
 	rc = ipr_cancel_op(scsi_cmd);
 	spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags);
 
+	if (rc == SUCCESS)
+		rc = ipr_wait_for_ops(ioa_cfg, scsi_cmd->device, ipr_match_lun);
 	LEAVE;
 	return rc;
 }
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1578,6 +1578,7 @@ struct ipr_cmnd {
 		struct scsi_device *sdev;
 	} u;
 
+	struct completion *eh_comp;
 	struct ipr_hrr_queue *hrrq;
 	struct ipr_ioa_cfg *ioa_cfg;
 };

[PATCH 3.10 09/32] dm cache: share cache-metadata object across inactive and active DM tables

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit 9b1cc9f251affdd27f29fe46d0989ba76c33faf6 upstream.

If a DM table is reloaded with an inactive table when the device is not
suspended (normal procedure for LVM2), then there will be two dm-bufio
objects that can diverge.  This can lead to a situation where the
inactive table uses bufio to read metadata at the same time the active
table writes metadata -- resulting in the inactive table having stale
metadata buffers once it is promoted to the active table slot.

Fix this by using reference counting and a global list of cache metadata
objects to ensure there is only one metadata object per metadata device.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-cache-metadata.c |  101 ++++++++++++++++++++++++++++++++++++++---
 1 file changed, 95 insertions(+), 6 deletions(-)

--- a/drivers/md/dm-cache-metadata.c
+++ b/drivers/md/dm-cache-metadata.c
@@ -88,6 +88,9 @@ struct cache_disk_superblock {
 } __packed;
 
 struct dm_cache_metadata {
+	atomic_t ref_count;
+	struct list_head list;
+
 	struct block_device *bdev;
 	struct dm_block_manager *bm;
 	struct dm_space_map *metadata_sm;
@@ -634,10 +637,10 @@ static void unpack_value(__le64 value_le
 
 /*----------------------------------------------------------------*/
 
-struct dm_cache_metadata *dm_cache_metadata_open(struct block_device *bdev,
-						 sector_t data_block_size,
-						 bool may_format_device,
-						 size_t policy_hint_size)
+static struct dm_cache_metadata *metadata_open(struct block_device *bdev,
+					       sector_t data_block_size,
+					       bool may_format_device,
+					       size_t policy_hint_size)
 {
 	int r;
 	struct dm_cache_metadata *cmd;
@@ -648,6 +651,7 @@ struct dm_cache_metadata *dm_cache_metad
 		return NULL;
 	}
 
+	atomic_set(&cmd->ref_count, 1);
 	init_rwsem(&cmd->root_lock);
 	cmd->bdev = bdev;
 	cmd->data_block_size = data_block_size;
@@ -670,10 +674,95 @@ struct dm_cache_metadata *dm_cache_metad
 	return cmd;
 }
 
+/*
+ * We keep a little list of ref counted metadata objects to prevent two
+ * different target instances creating separate bufio instances.  This is
+ * an issue if a table is reloaded before the suspend.
+ */
+static DEFINE_MUTEX(table_lock);
+static LIST_HEAD(table);
+
+static struct dm_cache_metadata *lookup(struct block_device *bdev)
+{
+	struct dm_cache_metadata *cmd;
+
+	list_for_each_entry(cmd, &table, list)
+		if (cmd->bdev == bdev) {
+			atomic_inc(&cmd->ref_count);
+			return cmd;
+		}
+
+	return NULL;
+}
+
+static struct dm_cache_metadata *lookup_or_open(struct block_device *bdev,
+						sector_t data_block_size,
+						bool may_format_device,
+						size_t policy_hint_size)
+{
+	struct dm_cache_metadata *cmd, *cmd2;
+
+	mutex_lock(&table_lock);
+	cmd = lookup(bdev);
+	mutex_unlock(&table_lock);
+
+	if (cmd)
+		return cmd;
+
+	cmd = metadata_open(bdev, data_block_size, may_format_device, policy_hint_size);
+	if (cmd) {
+		mutex_lock(&table_lock);
+		cmd2 = lookup(bdev);
+		if (cmd2) {
+			mutex_unlock(&table_lock);
+			__destroy_persistent_data_objects(cmd);
+			kfree(cmd);
+			return cmd2;
+		}
+		list_add(&cmd->list, &table);
+		mutex_unlock(&table_lock);
+	}
+
+	return cmd;
+}
+
+static bool same_params(struct dm_cache_metadata *cmd, sector_t data_block_size)
+{
+	if (cmd->data_block_size != data_block_size) {
+		DMERR("data_block_size (%llu) different from that in metadata (%llu)\n",
+		      (unsigned long long) data_block_size,
+		      (unsigned long long) cmd->data_block_size);
+		return false;
+	}
+
+	return true;
+}
+
+struct dm_cache_metadata *dm_cache_metadata_open(struct block_device *bdev,
+						 sector_t data_block_size,
+						 bool may_format_device,
+						 size_t policy_hint_size)
+{
+	struct dm_cache_metadata *cmd = lookup_or_open(bdev, data_block_size,
+						       may_format_device, policy_hint_size);
+	if (cmd && !same_params(cmd, data_block_size)) {
+		dm_cache_metadata_close(cmd);
+		return NULL;
+	}
+
+	return cmd;
+}
+
 void dm_cache_metadata_close(struct dm_cache_metadata *cmd)
 {
-	__destroy_persistent_data_objects(cmd);
-	kfree(cmd);
+	if (atomic_dec_and_test(&cmd->ref_count)) {
+		mutex_lock(&table_lock);
+		list_del(&cmd->list);
+		mutex_unlock(&table_lock);
+
+		__destroy_persistent_data_objects(cmd);
+		kfree(cmd);
+	}
 }
 
 int dm_cache_resize(struct dm_cache_metadata *cmd, dm_cblock_t new_cache_size)

[PATCH 3.10 10/32] time: settimeofday: Validate the values of tv from user

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit 6ada1fc0e1c4775de0e043e1bd3ae9d065491aa5 upstream.

An unvalidated user input is multiplied by a constant, which can result in
an undefined behaviour for large values. While this is validated later,
we should avoid triggering undefined behaviour.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: include trivial milisecond->microsecond correction noticed
by Andy]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/time.h |   13 +++++++++++++
 kernel/time.c        |    4 ++++
 2 files changed, 17 insertions(+)

--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -173,6 +173,19 @@ extern void getboottime(struct timespec
 extern void monotonic_to_bootbased(struct timespec *ts);
 extern void get_monotonic_boottime(struct timespec *ts);
 
+static inline bool timeval_valid(const struct timeval *tv)
+{
+	/* Dates before 1970 are bogus */
+	if (tv->tv_sec < 0)
+		return false;
+
+	/* Can't have more microseconds then a second */
+	if (tv->tv_usec < 0 || tv->tv_usec >= USEC_PER_SEC)
+		return false;
+
+	return true;
+}
+
 extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
 extern int timekeeping_valid_for_hres(void);
 extern u64 timekeeping_max_deferment(void);
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -195,6 +195,10 @@ SYSCALL_DEFINE2(settimeofday, struct tim
 	if (tv) {
 		if (copy_from_user(&user_tv, tv, sizeof(*tv)))
 			return -EFAULT;
+
+		if (!timeval_valid(&user_tv))
+			return -EINVAL;
+
 		new_ts.tv_sec = user_tv.tv_sec;
 		new_ts.tv_nsec = user_tv.tv_usec * NSEC_PER_USEC;
 	}

[PATCH 3.10 11/32] time: adjtimex: Validate the ADJ_FREQUENCY values

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit 5e5aeb4367b450a28f447f6d5ab57d8f2ab16a5f upstream.

Verify that the frequency value from userspace is valid and makes sense.

Unverified values can cause overflows later on.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: Fix up bug for negative values and drop redunent cap check]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/ntp.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -631,6 +631,13 @@ int ntp_validate_timex(struct timex *txc
 	if ((txc->modes & ADJ_SETOFFSET) && (!capable(CAP_SYS_TIME)))
 		return -EPERM;
 
+	if (txc->modes & ADJ_FREQUENCY) {
+		if (LONG_MIN / PPM_SCALE > txc->freq)
+			return -EINVAL;
+		if (LONG_MAX / PPM_SCALE < txc->freq)
+			return -EINVAL;
+	}
+
 	return 0;
 }
 

[PATCH 3.10 12/32] ARM: dts: imx25: Fix PWM "per" clocks

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.estevam@freescale.com>

commit 7ecd0bde5bfea524a843ad8fa8cb66ccbce68779 upstream.

Currently PWM functionality is broken on mx25 due to the wrong assignment of the
PWM "per" clock.

According to Documentation/devicetree/bindings/clock/imx25-clock.txt:
	pwm_ipg_per		52

,so update the pwm "per" to use 'pwm_ipg_per' instead of 'per10' clock.

With this change PWM can work fine on mx25.

Reported-by: Carlos Soto <csotoalonso@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx25.dtsi |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -335,7 +335,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fa0000 0x4000>;
-				clocks = <&clks 106>, <&clks 36>;
+				clocks = <&clks 106>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <36>;
 			};
@@ -354,7 +354,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fa8000 0x4000>;
-				clocks = <&clks 107>, <&clks 36>;
+				clocks = <&clks 107>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <41>;
 			};
@@ -394,7 +394,7 @@
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				reg = <0x53fc8000 0x4000>;
-				clocks = <&clks 108>, <&clks 36>;
+				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <42>;
 			};
@@ -439,7 +439,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fe0000 0x4000>;
-				clocks = <&clks 105>, <&clks 36>;
+				clocks = <&clks 105>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <26>;
 			};

[PATCH 3.10 13/32] bus: mvebu-mbus: fix support of MBus window 13

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <andrew@lunn.ch>

commit 38bdf45f4aa5cb6186d50a29e6cbbd9d486a1519 upstream.

On Armada XP, 375 and 38x the MBus window 13 has the remap capability,
like windows 0 to 7. However, the mvebu-mbus driver isn't currently
taking into account this special case, which means that when window 13
is actually used, the remap registers are left to 0, making the device
using this MBus window unavailable.

As a minimal fix for stable, don't use window 13. A full fix will
follow later.

Fixes: fddddb52a6c ("bus: introduce an Marvell EBU MBus driver")
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bus/mvebu-mbus.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -209,12 +209,25 @@ static void mvebu_mbus_disable_window(st
 }
 
 /* Checks whether the given window number is available */
+
+/* On Armada XP, 375 and 38x the MBus window 13 has the remap
+ * capability, like windows 0 to 7. However, the mvebu-mbus driver
+ * isn't currently taking into account this special case, which means
+ * that when window 13 is actually used, the remap registers are left
+ * to 0, making the device using this MBus window unavailable. The
+ * quick fix for stable is to not use window 13. A follow up patch
+ * will correctly handle this window.
+*/
 static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
 				     const int win)
 {
 	void __iomem *addr = mbus->mbuswins_base +
 		mbus->soc->win_cfg_offset(win);
 	u32 ctrl = readl(addr + WIN_CTRL_OFF);
+
+	if (win == 13)
+		return false;
+
 	return !(ctrl & WIN_CTRL_ENABLE);
 }
 

[PATCH 3.10 14/32] can: dev: fix crtlmode_supported check

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 9b1087aa5e86448fe6ad40a58964e35f3ba423d5 upstream.

When changing flags in the CAN drivers ctrlmode the provided new content has to
be checked whether the bits are allowed to be changed. The bits that are to be
changed are given as a bitfield in cm->mask. Therefore checking against
cm->flags is wrong as the content can hold any kind of values.

The iproute2 tool sets the bits in cm->mask and cm->flags depending on the
detected command line options. To be robust against bogus user space
applications additionally sanitize the provided flags with the provided mask.

Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/net/can/dev.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -643,10 +643,14 @@ static int can_changelink(struct net_dev
 		if (dev->flags & IFF_UP)
 			return -EBUSY;
 		cm = nla_data(data[IFLA_CAN_CTRLMODE]);
-		if (cm->flags & ~priv->ctrlmode_supported)
+
+		/* check whether changed bits are allowed to be modified */
+		if (cm->mask & ~priv->ctrlmode_supported)
 			return -EOPNOTSUPP;
+
+		/* clear bits to be modified and copy the flag values */
 		priv->ctrlmode &= ~cm->mask;
-		priv->ctrlmode |= cm->flags;
+		priv->ctrlmode |= (cm->flags & cm->mask);
 	}
 
 	if (data[IFLA_CAN_BITTIMING]) {

[PATCH 3.10 15/32] clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>

commit 8c38d28ba8da98f7102c31d35359b4dbe9d1f329 upstream.

EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask
produces a number outside the range 0x00 to 0xff, which always results
in execution of the default switch statement.

Obviously this is wrong and git history shows that the bitmask inversion
was incorrectly set during a refactoring of the MCT code.

Fix this by putting the inversion at the correct position again.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Reported-by: GP Orcullo <kinsamanka@gmail.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clocksource/exynos_mct.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -94,8 +94,8 @@ static void exynos4_mct_write(unsigned i
 	__raw_writel(value, reg_base + offset);
 
 	if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
-		stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
-		switch (offset & EXYNOS4_MCT_L_MASK) {
+		stat_addr = (offset & EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
+		switch (offset & ~EXYNOS4_MCT_L_MASK) {
 		case MCT_L_TCON_OFFSET:
 			mask = 1 << 3;		/* L_TCON write status */
 			break;

[PATCH 3.10 16/32] x86, hyperv: Mark the Hyper-V clocksource as being continuous

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "K. Y. Srinivasan" <kys@microsoft.com>

commit 32c6590d126836a062b3140ed52d898507987017 upstream.

The Hyper-V clocksource is continuous; mark it accordingly.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: jasowang@redhat.com
Cc: gregkh@linuxfoundation.org
Cc: devel@linuxdriverproject.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Link: http://lkml.kernel.org/r/1421108762-3331-1-git-send-email-kys@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mshyperv.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -60,6 +60,7 @@ static struct clocksource hyperv_cs = {
 	.rating		= 400, /* use this when running on Hyperv*/
 	.read		= read_hv_clock,
 	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static void __init ms_hyperv_init_platform(void)

[PATCH 3.10 17/32] x86/tsc: Change Fast TSC calibration failed from error to info

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Demers <alexandre.f.demers@gmail.com>

commit 520452172e6b318f3a8bd9d4fe1e25066393de25 upstream.

Many users see this message when booting without knowning that it is
of no importance and that TSC calibration may have succeeded by
another way.

As explained by Paul Bolle in
http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein

  "Fast TSC calibration failed" should not be considered as an error
  since other calibration methods are being tried afterward. At most,
  those send a warning if they fail (not an error). So let's change
  the message from error to warning.

[ tglx: Make if pr_info. It's really not important at all ]

Fixes: c767a54ba065 x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/tsc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -380,7 +380,7 @@ static unsigned long quick_pit_calibrate
 			goto success;
 		}
 	}
-	pr_err("Fast TSC calibration failed\n");
+	pr_info("Fast TSC calibration failed\n");
 	return 0;
 
 success:

[PATCH 3.10 18/32] KVM: x86: Fix of previously incomplete fix for CVE-2014-8480

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <nadav.amit@gmail.com>

commit 63ea0a49ae0b145b91ff2b070c01b66fc75854b9 upstream.

STR and SLDT with rip-relative operand can cause a host kernel oops.
Mark them as DstMem as well.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/emulate.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3808,8 +3808,8 @@ static const struct opcode group5[] = {
 };
 
 static const struct opcode group6[] = {
-	DI(Prot,	sldt),
-	DI(Prot,	str),
+	DI(Prot | DstMem,	sldt),
+	DI(Prot | DstMem,	str),
 	II(Prot | Priv | SrcMem16, em_lldt, lldt),
 	II(Prot | Priv | SrcMem16, em_ltr, ltr),
 	N, N, N, N,

[PATCH 3.10 19/32] x86, tls, ldt: Stop checking lm in LDT_empty

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@amacapital.net>

commit e30ab185c490e9a9381385529e0fd32f0a399495 upstream.

32-bit programs don't have an lm bit in their ABI, so they can't
reliably cause LDT_empty to return true without resorting to memset.
They shouldn't need to do this.

This should fix a longstanding, if minor, issue in all 64-bit kernels
as well as a potential regression in the TLS hardening code.

Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/72a059de55e86ad5e2935c80aa91880ddf19d07c.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/desc.h |    9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -251,7 +251,8 @@ static inline void native_load_tls(struc
 		gdt[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i];
 }
 
-#define _LDT_empty(info)				\
+/* This intentionally ignores lm, since 32-bit apps don't have that field. */
+#define LDT_empty(info)					\
 	((info)->base_addr		== 0	&&	\
 	 (info)->limit			== 0	&&	\
 	 (info)->contents		== 0	&&	\
@@ -261,12 +262,6 @@ static inline void native_load_tls(struc
 	 (info)->seg_not_present	== 1	&&	\
 	 (info)->useable		== 0)
 
-#ifdef CONFIG_X86_64
-#define LDT_empty(info) (_LDT_empty(info) && ((info)->lm == 0))
-#else
-#define LDT_empty(info) (_LDT_empty(info))
-#endif
-
 static inline void clear_LDT(void)
 {
 	set_ldt(NULL, 0);

[PATCH 3.10 20/32] x86, tls: Interpret an all-zero struct user_desc as "no segment"

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@amacapital.net>

commit 3669ef9fa7d35f573ec9c0e0341b29251c2734a7 upstream.

The Witcher 2 did something like this to allocate a TLS segment index:

        struct user_desc u_info;
        bzero(&u_info, sizeof(u_info));
        u_info.entry_number = (uint32_t)-1;

        syscall(SYS_set_thread_area, &u_info);

Strictly speaking, this code was never correct.  It should have set
read_exec_only and seg_not_present to 1 to indicate that it wanted
to find a free slot without putting anything there, or it should
have put something sensible in the TLS slot if it wanted to allocate
a TLS entry for real.  The actual effect of this code was to
allocate a bogus segment that could be used to exploit espfix.

The set_thread_area hardening patches changed the behavior, causing
set_thread_area to return -EINVAL and crashing the game.

This changes set_thread_area to interpret this as a request to find
a free slot and to leave it empty, which isn't *quite* what the game
expects but should be close enough to keep it working.  In
particular, using the code above to allocate two segments will
allocate the same segment both times.

According to FrostbittenKing on Github, this fixes The Witcher 2.

If this somehow still causes problems, we could instead allocate
a limit==0 32-bit data segment, but that seems rather ugly to me.

Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/0cb251abe1ff0958b8e468a9a9a905b80ae3a746.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/desc.h |   13 +++++++++++++
 arch/x86/kernel/tls.c       |   25 +++++++++++++++++++++++--
 2 files changed, 36 insertions(+), 2 deletions(-)

--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -262,6 +262,19 @@ static inline void native_load_tls(struc
 	 (info)->seg_not_present	== 1	&&	\
 	 (info)->useable		== 0)
 
+/* Lots of programs expect an all-zero user_desc to mean "no segment at all". */
+static inline bool LDT_zero(const struct user_desc *info)
+{
+	return (info->base_addr		== 0 &&
+		info->limit		== 0 &&
+		info->contents		== 0 &&
+		info->read_exec_only	== 0 &&
+		info->seg_32bit		== 0 &&
+		info->limit_in_pages	== 0 &&
+		info->seg_not_present	== 0 &&
+		info->useable		== 0);
+}
+
 static inline void clear_LDT(void)
 {
 	set_ldt(NULL, 0);
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -29,7 +29,28 @@ static int get_free_idx(void)
 
 static bool tls_desc_okay(const struct user_desc *info)
 {
-	if (LDT_empty(info))
+	/*
+	 * For historical reasons (i.e. no one ever documented how any
+	 * of the segmentation APIs work), user programs can and do
+	 * assume that a struct user_desc that's all zeros except for
+	 * entry_number means "no segment at all".  This never actually
+	 * worked.  In fact, up to Linux 3.19, a struct user_desc like
+	 * this would create a 16-bit read-write segment with base and
+	 * limit both equal to zero.
+	 *
+	 * That was close enough to "no segment at all" until we
+	 * hardened this function to disallow 16-bit TLS segments.  Fix
+	 * it up by interpreting these zeroed segments the way that they
+	 * were almost certainly intended to be interpreted.
+	 *
+	 * The correct way to ask for "no segment at all" is to specify
+	 * a user_desc that satisfies LDT_empty.  To keep everything
+	 * working, we accept both.
+	 *
+	 * Note that there's a similar kludge in modify_ldt -- look at
+	 * the distinction between modes 1 and 0x11.
+	 */
+	if (LDT_empty(info) || LDT_zero(info))
 		return true;
 
 	/*
@@ -71,7 +92,7 @@ static void set_tls_desc(struct task_str
 	cpu = get_cpu();
 
 	while (n-- > 0) {
-		if (LDT_empty(info))
+		if (LDT_empty(info) || LDT_zero(info))
 			desc->a = desc->b = 0;
 		else
 			fill_ldt(desc, info);

[PATCH 3.10 21/32] x86/asm/traps: Disable tracing and kprobes in fixup_bad_iret and sync_regs

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@amacapital.net>

commit 7ddc6a2199f1da405a2fb68c40db8899b1a8cd87 upstream.

These functions can be executed on the int3 stack, so kprobes
are dangerous. Tracing is probably a bad idea, too.

Fixes: b645af2d5905 ("x86_64, traps: Rework bad_iret")
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/50e33d26adca60816f3ba968875801652507d0c4.1416870125.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.10:
 - Use __kprobes instead of NOKPROBE_SYMBOL()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/traps.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -362,7 +362,7 @@ exit:
  * for scheduling or signal handling. The actual stack switch is done in
  * entry.S
  */
-asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
+asmlinkage notrace __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
 {
 	struct pt_regs *regs = eregs;
 	/* Did already sync */
@@ -387,7 +387,7 @@ struct bad_iret_stack {
 	struct pt_regs regs;
 };
 
-asmlinkage __visible
+asmlinkage __visible notrace __kprobes
 struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
 {
 	/*

[PATCH 3.10 22/32] sata_dwc_460ex: fix resource leak on error path

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit 4aaa71873ddb9faf4b0c4826579e2f6d18ff9ab4 upstream.

DMA mapped IO should be unmapped on the error path in probe() and
unconditionally on remove().

Fixes: 62936009f35a ([libata] Add 460EX on-chip SATA driver, sata_dwc_460ex)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/sata_dwc_460ex.c |   26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -797,7 +797,7 @@ static int dma_dwc_init(struct sata_dwc_
 	if (err) {
 		dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
 			" %d\n", __func__, err);
-		goto error_out;
+		return err;
 	}
 
 	/* Enabe DMA */
@@ -808,11 +808,6 @@ static int dma_dwc_init(struct sata_dwc_
 		sata_dma_regs);
 
 	return 0;
-
-error_out:
-	dma_dwc_exit(hsdev);
-
-	return err;
 }
 
 static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
@@ -1662,7 +1657,7 @@ static int sata_dwc_probe(struct platfor
 	char *ver = (char *)&versionr;
 	u8 *base = NULL;
 	int err = 0;
-	int irq, rc;
+	int irq;
 	struct ata_host *host;
 	struct ata_port_info pi = sata_dwc_port_info[0];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
@@ -1725,7 +1720,7 @@ static int sata_dwc_probe(struct platfor
 	if (irq == NO_IRQ) {
 		dev_err(&ofdev->dev, "no SATA DMA irq\n");
 		err = -ENODEV;
-		goto error_out;
+		goto error_iomap;
 	}
 
 	/* Get physical SATA DMA register base address */
@@ -1734,14 +1729,16 @@ static int sata_dwc_probe(struct platfor
 		dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
 			" address\n");
 		err = -ENODEV;
-		goto error_out;
+		goto error_iomap;
 	}
 
 	/* Save dev for later use in dev_xxx() routines */
 	host_pvt.dwc_dev = &ofdev->dev;
 
 	/* Initialize AHB DMAC */
-	dma_dwc_init(hsdev, irq);
+	err = dma_dwc_init(hsdev, irq);
+	if (err)
+		goto error_dma_iomap;
 
 	/* Enable SATA Interrupts */
 	sata_dwc_enable_interrupts(hsdev);
@@ -1759,9 +1756,8 @@ static int sata_dwc_probe(struct platfor
 	 * device discovery process, invoking our port_start() handler &
 	 * error_handler() to execute a dummy Softreset EH session
 	 */
-	rc = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
-
-	if (rc != 0)
+	err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+	if (err)
 		dev_err(&ofdev->dev, "failed to activate host");
 
 	dev_set_drvdata(&ofdev->dev, host);
@@ -1770,7 +1766,8 @@ static int sata_dwc_probe(struct platfor
 error_out:
 	/* Free SATA DMA resources */
 	dma_dwc_exit(hsdev);
-
+error_dma_iomap:
+	iounmap((void __iomem *)host_pvt.sata_dma_regs);
 error_iomap:
 	iounmap(base);
 error_kmalloc:
@@ -1791,6 +1788,7 @@ static int sata_dwc_remove(struct platfo
 	/* Free SATA DMA resources */
 	dma_dwc_exit(hsdev);
 
+	iounmap((void __iomem *)host_pvt.sata_dma_regs);
 	iounmap(hsdev->reg_base);
 	kfree(hsdev);
 	kfree(host);

[PATCH 3.10 23/32] KEYS: close race between key lookup and freeing

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit a3a8784454692dd72e5d5d34dcdab17b4420e74c upstream.

When a key is being garbage collected, it's key->user would get put before
the ->destroy() callback is called, where the key is removed from it's
respective tracking structures.

This leaves a key hanging in a semi-invalid state which leaves a window open
for a different task to try an access key->user. An example is
find_keyring_by_name() which would dereference key->user for a key that is
in the process of being garbage collected (where key->user was freed but
->destroy() wasn't called yet - so it's still present in the linked list).

This would cause either a panic, or corrupt memory.

Fixes CVE-2014-9529.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/keys/gc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/security/keys/gc.c
+++ b/security/keys/gc.c
@@ -201,12 +201,12 @@ static noinline void key_gc_unused_keys(
 		if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
 			atomic_dec(&key->user->nikeys);
 
-		key_user_put(key->user);
-
 		/* now throw away the key memory */
 		if (key->type->destroy)
 			key->type->destroy(key);
 
+		key_user_put(key->user);
+
 		kfree(key->description);
 
 #ifdef KEY_DEBUGGING

[PATCH 3.10 24/32] ipvs: uninitialized data with IP_VS_IPV6

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 3b05ac3824ed9648c0d9c02d51d9b54e4e7e874f upstream.

The app_tcp_pkt_out() function expects "*diff" to be set and ends up
using uninitialized data if CONFIG_IP_VS_IPV6 is turned on.

The same issue is there in app_tcp_pkt_in().  Thanks to Julian Anastasov
for noticing that.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipvs/ip_vs_ftp.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -183,6 +183,8 @@ static int ip_vs_ftp_out(struct ip_vs_ap
 	struct nf_conn *ct;
 	struct net *net;
 
+	*diff = 0;
+
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
 	 * so turn this into a no-op for IPv6 packets
@@ -191,8 +193,6 @@ static int ip_vs_ftp_out(struct ip_vs_ap
 		return 1;
 #endif
 
-	*diff = 0;
-
 	/* Only useful for established sessions */
 	if (cp->state != IP_VS_TCP_S_ESTABLISHED)
 		return 1;
@@ -321,6 +321,9 @@ static int ip_vs_ftp_in(struct ip_vs_app
 	struct ip_vs_conn *n_cp;
 	struct net *net;
 
+	/* no diff required for incoming packets */
+	*diff = 0;
+
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
 	 * so turn this into a no-op for IPv6 packets
@@ -329,9 +332,6 @@ static int ip_vs_ftp_in(struct ip_vs_app
 		return 1;
 #endif
 
-	/* no diff required for incoming packets */
-	*diff = 0;
-
 	/* Only useful for established sessions */
 	if (cp->state != IP_VS_TCP_S_ESTABLISHED)
 		return 1;

[PATCH 3.10 25/32] Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Vrabel <david.vrabel@citrix.com>

commit dbdd74763f1faf799fbb9ed30423182e92919378 upstream.

This reverts commit 2c3fc8d26dd09b9d7069687eead849ee81c78e46.

This commit broke on x86 PV because entries in the generic SWIOTLB are
indexed using (pseudo-)physical address not DMA address and these are
not the same in a x86 PV guest.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/swiotlb-xen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -390,7 +390,7 @@ static void xen_unmap_single(struct devi
 
 	/* NOTE: We use dev_addr here, not paddr! */
 	if (is_xen_swiotlb_buffer(dev_addr)) {
-		swiotlb_tbl_unmap_single(hwdev, dev_addr, size, dir);
+		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir);
 		return;
 	}
 

[PATCH 3.10 26/32] drbd: merge_bvec_fn: properly remap bvm->bi_bdev

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars Ellenberg <lars.ellenberg@linbit.com>

commit 3b9d35d744bb5139f9fed57f38c019bb8c7d351c upstream.

This was not noticed for many years. Affects operation if
md raid is used a backing device for DRBD.

CC: stable@kernel.org # v3.2+
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/drbd/drbd_req.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -1309,6 +1309,7 @@ int drbd_merge_bvec(struct request_queue
 		struct request_queue * const b =
 			mdev->ldev->backing_bdev->bd_disk->queue;
 		if (b->merge_bvec_fn) {
+			bvm->bi_bdev = mdev->ldev->backing_bdev;
 			backing_limit = b->merge_bvec_fn(b, bvm, bvec);
 			limit = min(limit, backing_limit);
 		}

[PATCH 3.10 27/32] crypto: prefix module autoloading with "crypto-"

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 5d26a105b5a73e5635eae0629b42fa0a90e07b7b upstream.

This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:

https://lkml.org/lkml/2013/3/4/70

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/crypto/aes_glue.c                 |    4 ++--
 arch/arm/crypto/sha1_glue.c                |    2 +-
 arch/powerpc/crypto/sha1.c                 |    2 +-
 arch/s390/crypto/aes_s390.c                |    2 +-
 arch/s390/crypto/des_s390.c                |    4 ++--
 arch/s390/crypto/ghash_s390.c              |    2 +-
 arch/s390/crypto/sha1_s390.c               |    2 +-
 arch/s390/crypto/sha256_s390.c             |    4 ++--
 arch/s390/crypto/sha512_s390.c             |    4 ++--
 arch/sparc/crypto/aes_glue.c               |    2 +-
 arch/sparc/crypto/camellia_glue.c          |    2 +-
 arch/sparc/crypto/crc32c_glue.c            |    2 +-
 arch/sparc/crypto/des_glue.c               |    2 +-
 arch/sparc/crypto/md5_glue.c               |    2 +-
 arch/sparc/crypto/sha1_glue.c              |    2 +-
 arch/sparc/crypto/sha256_glue.c            |    4 ++--
 arch/sparc/crypto/sha512_glue.c            |    4 ++--
 arch/x86/crypto/aes_glue.c                 |    4 ++--
 arch/x86/crypto/aesni-intel_glue.c         |    2 +-
 arch/x86/crypto/blowfish_avx2_glue.c       |    4 ++--
 arch/x86/crypto/blowfish_glue.c            |    4 ++--
 arch/x86/crypto/camellia_aesni_avx2_glue.c |    4 ++--
 arch/x86/crypto/camellia_aesni_avx_glue.c  |    4 ++--
 arch/x86/crypto/camellia_glue.c            |    4 ++--
 arch/x86/crypto/cast5_avx_glue.c           |    2 +-
 arch/x86/crypto/cast6_avx_glue.c           |    2 +-
 arch/x86/crypto/crc32-pclmul_glue.c        |    4 ++--
 arch/x86/crypto/crc32c-intel_glue.c        |    4 ++--
 arch/x86/crypto/ghash-clmulni-intel_glue.c |    2 +-
 arch/x86/crypto/salsa20_glue.c             |    4 ++--
 arch/x86/crypto/serpent_avx2_glue.c        |    4 ++--
 arch/x86/crypto/serpent_avx_glue.c         |    2 +-
 arch/x86/crypto/serpent_sse2_glue.c        |    2 +-
 arch/x86/crypto/sha1_ssse3_glue.c          |    2 +-
 arch/x86/crypto/sha256_ssse3_glue.c        |    2 +-
 arch/x86/crypto/sha512_ssse3_glue.c        |    2 +-
 arch/x86/crypto/twofish_avx2_glue.c        |    4 ++--
 arch/x86/crypto/twofish_avx_glue.c         |    2 +-
 arch/x86/crypto/twofish_glue.c             |    4 ++--
 arch/x86/crypto/twofish_glue_3way.c        |    4 ++--
 crypto/842.c                               |    1 +
 crypto/aes_generic.c                       |    2 +-
 crypto/ansi_cprng.c                        |    2 +-
 crypto/anubis.c                            |    1 +
 crypto/api.c                               |    4 ++--
 crypto/arc4.c                              |    1 +
 crypto/blowfish_generic.c                  |    2 +-
 crypto/camellia_generic.c                  |    2 +-
 crypto/cast5_generic.c                     |    2 +-
 crypto/cast6_generic.c                     |    2 +-
 crypto/ccm.c                               |    4 ++--
 crypto/crc32.c                             |    1 +
 crypto/crypto_null.c                       |    6 +++---
 crypto/ctr.c                               |    2 +-
 crypto/deflate.c                           |    2 +-
 crypto/des_generic.c                       |    4 ++--
 crypto/fcrypt.c                            |    1 +
 crypto/gcm.c                               |    6 +++---
 crypto/ghash-generic.c                     |    2 +-
 crypto/khazad.c                            |    1 +
 crypto/krng.c                              |    2 +-
 crypto/lzo.c                               |    1 +
 crypto/md4.c                               |    2 +-
 crypto/md5.c                               |    1 +
 crypto/michael_mic.c                       |    1 +
 crypto/rmd128.c                            |    1 +
 crypto/rmd160.c                            |    1 +
 crypto/rmd256.c                            |    1 +
 crypto/rmd320.c                            |    1 +
 crypto/salsa20_generic.c                   |    2 +-
 crypto/seed.c                              |    1 +
 crypto/serpent_generic.c                   |    4 ++--
 crypto/sha1_generic.c                      |    2 +-
 crypto/sha256_generic.c                    |    4 ++--
 crypto/sha512_generic.c                    |    4 ++--
 crypto/tea.c                               |    4 ++--
 crypto/tgr192.c                            |    4 ++--
 crypto/twofish_generic.c                   |    2 +-
 crypto/wp512.c                             |    4 ++--
 crypto/zlib.c                              |    1 +
 drivers/crypto/padlock-aes.c               |    2 +-
 drivers/crypto/padlock-sha.c               |    8 ++++----
 drivers/crypto/ux500/cryp/cryp_core.c      |    4 ++--
 drivers/crypto/ux500/hash/hash_core.c      |    8 ++++----
 drivers/s390/crypto/ap_bus.c               |    1 +
 include/linux/crypto.h                     |   13 +++++++++++++
 86 files changed, 137 insertions(+), 108 deletions(-)

--- a/arch/arm/crypto/aes_glue.c
+++ b/arch/arm/crypto/aes_glue.c
@@ -103,6 +103,6 @@ module_exit(aes_fini);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm (ASM)");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("aes");
-MODULE_ALIAS("aes-asm");
+MODULE_ALIAS_CRYPTO("aes");
+MODULE_ALIAS_CRYPTO("aes-asm");
 MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
--- a/arch/arm/crypto/sha1_glue.c
+++ b/arch/arm/crypto/sha1_glue.c
@@ -175,5 +175,5 @@ module_exit(sha1_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (ARM)");
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
 MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
--- a/arch/powerpc/crypto/sha1.c
+++ b/arch/powerpc/crypto/sha1.c
@@ -154,4 +154,4 @@ module_exit(sha1_powerpc_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
-MODULE_ALIAS("sha1-powerpc");
+MODULE_ALIAS_CRYPTO("sha1-powerpc");
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -970,7 +970,7 @@ static void __exit aes_s390_fini(void)
 module_init(aes_s390_init);
 module_exit(aes_s390_fini);
 
-MODULE_ALIAS("aes-all");
+MODULE_ALIAS_CRYPTO("aes-all");
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
 MODULE_LICENSE("GPL");
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -619,8 +619,8 @@ static void __exit des_s390_exit(void)
 module_init(des_s390_init);
 module_exit(des_s390_exit);
 
-MODULE_ALIAS("des");
-MODULE_ALIAS("des3_ede");
+MODULE_ALIAS_CRYPTO("des");
+MODULE_ALIAS_CRYPTO("des3_ede");
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
--- a/arch/s390/crypto/ghash_s390.c
+++ b/arch/s390/crypto/ghash_s390.c
@@ -160,7 +160,7 @@ static void __exit ghash_mod_exit(void)
 module_init(ghash_mod_init);
 module_exit(ghash_mod_exit);
 
-MODULE_ALIAS("ghash");
+MODULE_ALIAS_CRYPTO("ghash");
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("GHASH Message Digest Algorithm, s390 implementation");
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -103,6 +103,6 @@ static void __exit sha1_s390_fini(void)
 module_init(sha1_s390_init);
 module_exit(sha1_s390_fini);
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -143,7 +143,7 @@ static void __exit sha256_s390_fini(void
 module_init(sha256_s390_init);
 module_exit(sha256_s390_fini);
 
-MODULE_ALIAS("sha256");
-MODULE_ALIAS("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
+MODULE_ALIAS_CRYPTO("sha224");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA256 and SHA224 Secure Hash Algorithm");
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -86,7 +86,7 @@ static struct shash_alg sha512_alg = {
 	}
 };
 
-MODULE_ALIAS("sha512");
+MODULE_ALIAS_CRYPTO("sha512");
 
 static int sha384_init(struct shash_desc *desc)
 {
@@ -126,7 +126,7 @@ static struct shash_alg sha384_alg = {
 	}
 };
 
-MODULE_ALIAS("sha384");
+MODULE_ALIAS_CRYPTO("sha384");
 
 static int __init init(void)
 {
--- a/arch/sparc/crypto/aes_glue.c
+++ b/arch/sparc/crypto/aes_glue.c
@@ -499,6 +499,6 @@ module_exit(aes_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("AES Secure Hash Algorithm, sparc64 aes opcode accelerated");
 
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/camellia_glue.c
+++ b/arch/sparc/crypto/camellia_glue.c
@@ -322,6 +322,6 @@ module_exit(camellia_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, sparc64 camellia opcode accelerated");
 
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/crc32c_glue.c
+++ b/arch/sparc/crypto/crc32c_glue.c
@@ -176,6 +176,6 @@ module_exit(crc32c_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CRC32c (Castagnoli), sparc64 crc32c opcode accelerated");
 
-MODULE_ALIAS("crc32c");
+MODULE_ALIAS_CRYPTO("crc32c");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/des_glue.c
+++ b/arch/sparc/crypto/des_glue.c
@@ -532,6 +532,6 @@ module_exit(des_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms, sparc64 des opcode accelerated");
 
-MODULE_ALIAS("des");
+MODULE_ALIAS_CRYPTO("des");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/md5_glue.c
+++ b/arch/sparc/crypto/md5_glue.c
@@ -185,6 +185,6 @@ module_exit(md5_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MD5 Secure Hash Algorithm, sparc64 md5 opcode accelerated");
 
-MODULE_ALIAS("md5");
+MODULE_ALIAS_CRYPTO("md5");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/sha1_glue.c
+++ b/arch/sparc/crypto/sha1_glue.c
@@ -180,6 +180,6 @@ module_exit(sha1_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, sparc64 sha1 opcode accelerated");
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/sha256_glue.c
+++ b/arch/sparc/crypto/sha256_glue.c
@@ -237,7 +237,7 @@ module_exit(sha256_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm, sparc64 sha256 opcode accelerated");
 
-MODULE_ALIAS("sha224");
-MODULE_ALIAS("sha256");
+MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/sha512_glue.c
+++ b/arch/sparc/crypto/sha512_glue.c
@@ -222,7 +222,7 @@ module_exit(sha512_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-384 and SHA-512 Secure Hash Algorithm, sparc64 sha512 opcode accelerated");
 
-MODULE_ALIAS("sha384");
-MODULE_ALIAS("sha512");
+MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
 
 #include "crop_devid.c"
--- a/arch/x86/crypto/aes_glue.c
+++ b/arch/x86/crypto/aes_glue.c
@@ -66,5 +66,5 @@ module_exit(aes_fini);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, asm optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("aes");
-MODULE_ALIAS("aes-asm");
+MODULE_ALIAS_CRYPTO("aes");
+MODULE_ALIAS_CRYPTO("aes-asm");
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -1373,4 +1373,4 @@ module_exit(aesni_exit);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, Intel AES-NI instructions optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
--- a/arch/x86/crypto/blowfish_avx2_glue.c
+++ b/arch/x86/crypto/blowfish_avx2_glue.c
@@ -581,5 +581,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Blowfish Cipher Algorithm, AVX2 optimized");
-MODULE_ALIAS("blowfish");
-MODULE_ALIAS("blowfish-asm");
+MODULE_ALIAS_CRYPTO("blowfish");
+MODULE_ALIAS_CRYPTO("blowfish-asm");
--- a/arch/x86/crypto/blowfish_glue.c
+++ b/arch/x86/crypto/blowfish_glue.c
@@ -465,5 +465,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Blowfish Cipher Algorithm, asm optimized");
-MODULE_ALIAS("blowfish");
-MODULE_ALIAS("blowfish-asm");
+MODULE_ALIAS_CRYPTO("blowfish");
+MODULE_ALIAS_CRYPTO("blowfish-asm");
--- a/arch/x86/crypto/camellia_aesni_avx2_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx2_glue.c
@@ -582,5 +582,5 @@ module_exit(camellia_aesni_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, AES-NI/AVX2 optimized");
-MODULE_ALIAS("camellia");
-MODULE_ALIAS("camellia-asm");
+MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-asm");
--- a/arch/x86/crypto/camellia_aesni_avx_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx_glue.c
@@ -574,5 +574,5 @@ module_exit(camellia_aesni_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, AES-NI/AVX optimized");
-MODULE_ALIAS("camellia");
-MODULE_ALIAS("camellia-asm");
+MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-asm");
--- a/arch/x86/crypto/camellia_glue.c
+++ b/arch/x86/crypto/camellia_glue.c
@@ -1725,5 +1725,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, asm optimized");
-MODULE_ALIAS("camellia");
-MODULE_ALIAS("camellia-asm");
+MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-asm");
--- a/arch/x86/crypto/cast5_avx_glue.c
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -494,4 +494,4 @@ module_exit(cast5_exit);
 
 MODULE_DESCRIPTION("Cast5 Cipher Algorithm, AVX optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("cast5");
+MODULE_ALIAS_CRYPTO("cast5");
--- a/arch/x86/crypto/cast6_avx_glue.c
+++ b/arch/x86/crypto/cast6_avx_glue.c
@@ -611,4 +611,4 @@ module_exit(cast6_exit);
 
 MODULE_DESCRIPTION("Cast6 Cipher Algorithm, AVX optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("cast6");
+MODULE_ALIAS_CRYPTO("cast6");
--- a/arch/x86/crypto/crc32-pclmul_glue.c
+++ b/arch/x86/crypto/crc32-pclmul_glue.c
@@ -197,5 +197,5 @@ module_exit(crc32_pclmul_mod_fini);
 MODULE_AUTHOR("Alexander Boyko <alexander_boyko@xyratex.com>");
 MODULE_LICENSE("GPL");
 
-MODULE_ALIAS("crc32");
-MODULE_ALIAS("crc32-pclmul");
+MODULE_ALIAS_CRYPTO("crc32");
+MODULE_ALIAS_CRYPTO("crc32-pclmul");
--- a/arch/x86/crypto/crc32c-intel_glue.c
+++ b/arch/x86/crypto/crc32c-intel_glue.c
@@ -280,5 +280,5 @@ MODULE_AUTHOR("Austin Zhang <austin.zhan
 MODULE_DESCRIPTION("CRC32c (Castagnoli) optimization using Intel Hardware.");
 MODULE_LICENSE("GPL");
 
-MODULE_ALIAS("crc32c");
-MODULE_ALIAS("crc32c-intel");
+MODULE_ALIAS_CRYPTO("crc32c");
+MODULE_ALIAS_CRYPTO("crc32c-intel");
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -341,4 +341,4 @@ module_exit(ghash_pclmulqdqni_mod_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("GHASH Message Digest Algorithm, "
 		   "acclerated by PCLMULQDQ-NI");
-MODULE_ALIAS("ghash");
+MODULE_ALIAS_CRYPTO("ghash");
--- a/arch/x86/crypto/salsa20_glue.c
+++ b/arch/x86/crypto/salsa20_glue.c
@@ -119,5 +119,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm (optimized assembly version)");
-MODULE_ALIAS("salsa20");
-MODULE_ALIAS("salsa20-asm");
+MODULE_ALIAS_CRYPTO("salsa20");
+MODULE_ALIAS_CRYPTO("salsa20-asm");
--- a/arch/x86/crypto/serpent_avx2_glue.c
+++ b/arch/x86/crypto/serpent_avx2_glue.c
@@ -558,5 +558,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Serpent Cipher Algorithm, AVX2 optimized");
-MODULE_ALIAS("serpent");
-MODULE_ALIAS("serpent-asm");
+MODULE_ALIAS_CRYPTO("serpent");
+MODULE_ALIAS_CRYPTO("serpent-asm");
--- a/arch/x86/crypto/serpent_avx_glue.c
+++ b/arch/x86/crypto/serpent_avx_glue.c
@@ -617,4 +617,4 @@ module_exit(serpent_exit);
 
 MODULE_DESCRIPTION("Serpent Cipher Algorithm, AVX optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("serpent");
+MODULE_ALIAS_CRYPTO("serpent");
--- a/arch/x86/crypto/serpent_sse2_glue.c
+++ b/arch/x86/crypto/serpent_sse2_glue.c
@@ -618,4 +618,4 @@ module_exit(serpent_sse2_exit);
 
 MODULE_DESCRIPTION("Serpent Cipher Algorithm, SSE2 optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("serpent");
+MODULE_ALIAS_CRYPTO("serpent");
--- a/arch/x86/crypto/sha1_ssse3_glue.c
+++ b/arch/x86/crypto/sha1_ssse3_glue.c
@@ -237,4 +237,4 @@ module_exit(sha1_ssse3_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, Supplemental SSE3 accelerated");
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
--- a/arch/x86/crypto/sha256_ssse3_glue.c
+++ b/arch/x86/crypto/sha256_ssse3_glue.c
@@ -272,4 +272,4 @@ module_exit(sha256_ssse3_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated");
 
-MODULE_ALIAS("sha256");
+MODULE_ALIAS_CRYPTO("sha256");
--- a/arch/x86/crypto/sha512_ssse3_glue.c
+++ b/arch/x86/crypto/sha512_ssse3_glue.c
@@ -279,4 +279,4 @@ module_exit(sha512_ssse3_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA512 Secure Hash Algorithm, Supplemental SSE3 accelerated");
 
-MODULE_ALIAS("sha512");
+MODULE_ALIAS_CRYPTO("sha512");
--- a/arch/x86/crypto/twofish_avx2_glue.c
+++ b/arch/x86/crypto/twofish_avx2_glue.c
@@ -580,5 +580,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Twofish Cipher Algorithm, AVX2 optimized");
-MODULE_ALIAS("twofish");
-MODULE_ALIAS("twofish-asm");
+MODULE_ALIAS_CRYPTO("twofish");
+MODULE_ALIAS_CRYPTO("twofish-asm");
--- a/arch/x86/crypto/twofish_avx_glue.c
+++ b/arch/x86/crypto/twofish_avx_glue.c
@@ -589,4 +589,4 @@ module_exit(twofish_exit);
 
 MODULE_DESCRIPTION("Twofish Cipher Algorithm, AVX optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("twofish");
+MODULE_ALIAS_CRYPTO("twofish");
--- a/arch/x86/crypto/twofish_glue.c
+++ b/arch/x86/crypto/twofish_glue.c
@@ -96,5 +96,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Twofish Cipher Algorithm, asm optimized");
-MODULE_ALIAS("twofish");
-MODULE_ALIAS("twofish-asm");
+MODULE_ALIAS_CRYPTO("twofish");
+MODULE_ALIAS_CRYPTO("twofish-asm");
--- a/arch/x86/crypto/twofish_glue_3way.c
+++ b/arch/x86/crypto/twofish_glue_3way.c
@@ -495,5 +495,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Twofish Cipher Algorithm, 3-way parallel asm optimized");
-MODULE_ALIAS("twofish");
-MODULE_ALIAS("twofish-asm");
+MODULE_ALIAS_CRYPTO("twofish");
+MODULE_ALIAS_CRYPTO("twofish-asm");
--- a/crypto/842.c
+++ b/crypto/842.c
@@ -180,3 +180,4 @@ module_exit(nx842_mod_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("842 Compression Algorithm");
+MODULE_ALIAS_CRYPTO("842");
--- a/crypto/aes_generic.c
+++ b/crypto/aes_generic.c
@@ -1474,4 +1474,4 @@ module_exit(aes_fini);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
--- a/crypto/ansi_cprng.c
+++ b/crypto/ansi_cprng.c
@@ -476,4 +476,4 @@ module_param(dbg, int, 0);
 MODULE_PARM_DESC(dbg, "Boolean to enable debugging (0/1 == off/on)");
 module_init(prng_mod_init);
 module_exit(prng_mod_fini);
-MODULE_ALIAS("stdrng");
+MODULE_ALIAS_CRYPTO("stdrng");
--- a/crypto/anubis.c
+++ b/crypto/anubis.c
@@ -704,3 +704,4 @@ module_exit(anubis_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Anubis Cryptographic Algorithm");
+MODULE_ALIAS_CRYPTO("anubis");
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -216,11 +216,11 @@ struct crypto_alg *crypto_larval_lookup(
 
 	alg = crypto_alg_lookup(name, type, mask);
 	if (!alg) {
-		request_module("%s", name);
+		request_module("crypto-%s", name);
 
 		if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask &
 		      CRYPTO_ALG_NEED_FALLBACK))
-			request_module("%s-all", name);
+			request_module("crypto-%s-all", name);
 
 		alg = crypto_alg_lookup(name, type, mask);
 	}
--- a/crypto/arc4.c
+++ b/crypto/arc4.c
@@ -166,3 +166,4 @@ module_exit(arc4_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("ARC4 Cipher Algorithm");
 MODULE_AUTHOR("Jon Oberheide <jon@oberheide.org>");
+MODULE_ALIAS_CRYPTO("arc4");
--- a/crypto/blowfish_generic.c
+++ b/crypto/blowfish_generic.c
@@ -138,4 +138,4 @@ module_exit(blowfish_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Blowfish Cipher Algorithm");
-MODULE_ALIAS("blowfish");
+MODULE_ALIAS_CRYPTO("blowfish");
--- a/crypto/camellia_generic.c
+++ b/crypto/camellia_generic.c
@@ -1098,4 +1098,4 @@ module_exit(camellia_fini);
 
 MODULE_DESCRIPTION("Camellia Cipher Algorithm");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("camellia");
+MODULE_ALIAS_CRYPTO("camellia");
--- a/crypto/cast5_generic.c
+++ b/crypto/cast5_generic.c
@@ -549,4 +549,4 @@ module_exit(cast5_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cast5 Cipher Algorithm");
-MODULE_ALIAS("cast5");
+MODULE_ALIAS_CRYPTO("cast5");
--- a/crypto/cast6_generic.c
+++ b/crypto/cast6_generic.c
@@ -291,4 +291,4 @@ module_exit(cast6_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cast6 Cipher Algorithm");
-MODULE_ALIAS("cast6");
+MODULE_ALIAS_CRYPTO("cast6");
--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -879,5 +879,5 @@ module_exit(crypto_ccm_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Counter with CBC MAC");
-MODULE_ALIAS("ccm_base");
-MODULE_ALIAS("rfc4309");
+MODULE_ALIAS_CRYPTO("ccm_base");
+MODULE_ALIAS_CRYPTO("rfc4309");
--- a/crypto/crc32.c
+++ b/crypto/crc32.c
@@ -156,3 +156,4 @@ module_exit(crc32_mod_fini);
 MODULE_AUTHOR("Alexander Boyko <alexander_boyko@xyratex.com>");
 MODULE_DESCRIPTION("CRC32 calculations wrapper for lib/crc32");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS_CRYPTO("crc32");
--- a/crypto/crypto_null.c
+++ b/crypto/crypto_null.c
@@ -149,9 +149,9 @@ static struct crypto_alg null_algs[3] =
 	.coa_decompress		=	null_compress } }
 } };
 
-MODULE_ALIAS("compress_null");
-MODULE_ALIAS("digest_null");
-MODULE_ALIAS("cipher_null");
+MODULE_ALIAS_CRYPTO("compress_null");
+MODULE_ALIAS_CRYPTO("digest_null");
+MODULE_ALIAS_CRYPTO("cipher_null");
 
 static int __init crypto_null_mod_init(void)
 {
--- a/crypto/ctr.c
+++ b/crypto/ctr.c
@@ -466,4 +466,4 @@ module_exit(crypto_ctr_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CTR Counter block mode");
-MODULE_ALIAS("rfc3686");
+MODULE_ALIAS_CRYPTO("rfc3686");
--- a/crypto/deflate.c
+++ b/crypto/deflate.c
@@ -222,4 +222,4 @@ module_exit(deflate_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Deflate Compression Algorithm for IPCOMP");
 MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
-
+MODULE_ALIAS_CRYPTO("deflate");
--- a/crypto/des_generic.c
+++ b/crypto/des_generic.c
@@ -971,7 +971,7 @@ static struct crypto_alg des_algs[2] = {
 	.cia_decrypt		=	des3_ede_decrypt } }
 } };
 
-MODULE_ALIAS("des3_ede");
+MODULE_ALIAS_CRYPTO("des3_ede");
 
 static int __init des_generic_mod_init(void)
 {
@@ -989,4 +989,4 @@ module_exit(des_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
 MODULE_AUTHOR("Dag Arne Osvik <da@osvik.no>");
-MODULE_ALIAS("des");
+MODULE_ALIAS_CRYPTO("des");
--- a/crypto/fcrypt.c
+++ b/crypto/fcrypt.c
@@ -420,3 +420,4 @@ module_exit(fcrypt_mod_fini);
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("FCrypt Cipher Algorithm");
 MODULE_AUTHOR("David Howells <dhowells@redhat.com>");
+MODULE_ALIAS_CRYPTO("fcrypt");
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -1441,6 +1441,6 @@ module_exit(crypto_gcm_module_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Galois/Counter Mode");
 MODULE_AUTHOR("Mikko Herranen <mh1@iki.fi>");
-MODULE_ALIAS("gcm_base");
-MODULE_ALIAS("rfc4106");
-MODULE_ALIAS("rfc4543");
+MODULE_ALIAS_CRYPTO("gcm_base");
+MODULE_ALIAS_CRYPTO("rfc4106");
+MODULE_ALIAS_CRYPTO("rfc4543");
--- a/crypto/ghash-generic.c
+++ b/crypto/ghash-generic.c
@@ -172,4 +172,4 @@ module_exit(ghash_mod_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("GHASH Message Digest Algorithm");
-MODULE_ALIAS("ghash");
+MODULE_ALIAS_CRYPTO("ghash");
--- a/crypto/khazad.c
+++ b/crypto/khazad.c
@@ -880,3 +880,4 @@ module_exit(khazad_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Khazad Cryptographic Algorithm");
+MODULE_ALIAS_CRYPTO("khazad");
--- a/crypto/krng.c
+++ b/crypto/krng.c
@@ -62,4 +62,4 @@ module_exit(krng_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Kernel Random Number Generator");
-MODULE_ALIAS("stdrng");
+MODULE_ALIAS_CRYPTO("stdrng");
--- a/crypto/lzo.c
+++ b/crypto/lzo.c
@@ -103,3 +103,4 @@ module_exit(lzo_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("LZO Compression Algorithm");
+MODULE_ALIAS_CRYPTO("lzo");
--- a/crypto/md4.c
+++ b/crypto/md4.c
@@ -255,4 +255,4 @@ module_exit(md4_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MD4 Message Digest Algorithm");
-
+MODULE_ALIAS_CRYPTO("md4");
--- a/crypto/md5.c
+++ b/crypto/md5.c
@@ -168,3 +168,4 @@ module_exit(md5_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MD5 Message Digest Algorithm");
+MODULE_ALIAS_CRYPTO("md5");
--- a/crypto/michael_mic.c
+++ b/crypto/michael_mic.c
@@ -184,3 +184,4 @@ module_exit(michael_mic_exit);
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Michael MIC");
 MODULE_AUTHOR("Jouni Malinen <j@w1.fi>");
+MODULE_ALIAS_CRYPTO("michael_mic");
--- a/crypto/rmd128.c
+++ b/crypto/rmd128.c
@@ -327,3 +327,4 @@ module_exit(rmd128_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Adrian-Ken Rueegsegger <ken@codelabs.ch>");
 MODULE_DESCRIPTION("RIPEMD-128 Message Digest");
+MODULE_ALIAS_CRYPTO("rmd128");
--- a/crypto/rmd160.c
+++ b/crypto/rmd160.c
@@ -371,3 +371,4 @@ module_exit(rmd160_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Adrian-Ken Rueegsegger <ken@codelabs.ch>");
 MODULE_DESCRIPTION("RIPEMD-160 Message Digest");
+MODULE_ALIAS_CRYPTO("rmd160");
--- a/crypto/rmd256.c
+++ b/crypto/rmd256.c
@@ -346,3 +346,4 @@ module_exit(rmd256_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Adrian-Ken Rueegsegger <ken@codelabs.ch>");
 MODULE_DESCRIPTION("RIPEMD-256 Message Digest");
+MODULE_ALIAS_CRYPTO("rmd256");
--- a/crypto/rmd320.c
+++ b/crypto/rmd320.c
@@ -395,3 +395,4 @@ module_exit(rmd320_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Adrian-Ken Rueegsegger <ken@codelabs.ch>");
 MODULE_DESCRIPTION("RIPEMD-320 Message Digest");
+MODULE_ALIAS_CRYPTO("rmd320");
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -248,4 +248,4 @@ module_exit(salsa20_generic_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm");
-MODULE_ALIAS("salsa20");
+MODULE_ALIAS_CRYPTO("salsa20");
--- a/crypto/seed.c
+++ b/crypto/seed.c
@@ -476,3 +476,4 @@ module_exit(seed_fini);
 MODULE_DESCRIPTION("SEED Cipher Algorithm");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Hye-Shik Chang <perky@FreeBSD.org>, Kim Hyun <hkim@kisa.or.kr>");
+MODULE_ALIAS_CRYPTO("seed");
--- a/crypto/serpent_generic.c
+++ b/crypto/serpent_generic.c
@@ -665,5 +665,5 @@ module_exit(serpent_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Serpent and tnepres (kerneli compatible serpent reversed) Cipher Algorithm");
 MODULE_AUTHOR("Dag Arne Osvik <osvik@ii.uib.no>");
-MODULE_ALIAS("tnepres");
-MODULE_ALIAS("serpent");
+MODULE_ALIAS_CRYPTO("tnepres");
+MODULE_ALIAS_CRYPTO("serpent");
--- a/crypto/sha1_generic.c
+++ b/crypto/sha1_generic.c
@@ -153,4 +153,4 @@ module_exit(sha1_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
--- a/crypto/sha256_generic.c
+++ b/crypto/sha256_generic.c
@@ -384,5 +384,5 @@ module_exit(sha256_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm");
 
-MODULE_ALIAS("sha224");
-MODULE_ALIAS("sha256");
+MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -285,5 +285,5 @@ module_exit(sha512_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-512 and SHA-384 Secure Hash Algorithms");
 
-MODULE_ALIAS("sha384");
-MODULE_ALIAS("sha512");
+MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
--- a/crypto/tea.c
+++ b/crypto/tea.c
@@ -270,8 +270,8 @@ static void __exit tea_mod_fini(void)
 	crypto_unregister_algs(tea_algs, ARRAY_SIZE(tea_algs));
 }
 
-MODULE_ALIAS("xtea");
-MODULE_ALIAS("xeta");
+MODULE_ALIAS_CRYPTO("xtea");
+MODULE_ALIAS_CRYPTO("xeta");
 
 module_init(tea_mod_init);
 module_exit(tea_mod_fini);
--- a/crypto/tgr192.c
+++ b/crypto/tgr192.c
@@ -676,8 +676,8 @@ static void __exit tgr192_mod_fini(void)
 	crypto_unregister_shashes(tgr_algs, ARRAY_SIZE(tgr_algs));
 }
 
-MODULE_ALIAS("tgr160");
-MODULE_ALIAS("tgr128");
+MODULE_ALIAS_CRYPTO("tgr160");
+MODULE_ALIAS_CRYPTO("tgr128");
 
 module_init(tgr192_mod_init);
 module_exit(tgr192_mod_fini);
--- a/crypto/twofish_generic.c
+++ b/crypto/twofish_generic.c
@@ -211,4 +211,4 @@ module_exit(twofish_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Twofish Cipher Algorithm");
-MODULE_ALIAS("twofish");
+MODULE_ALIAS_CRYPTO("twofish");
--- a/crypto/wp512.c
+++ b/crypto/wp512.c
@@ -1167,8 +1167,8 @@ static void __exit wp512_mod_fini(void)
 	crypto_unregister_shashes(wp_algs, ARRAY_SIZE(wp_algs));
 }
 
-MODULE_ALIAS("wp384");
-MODULE_ALIAS("wp256");
+MODULE_ALIAS_CRYPTO("wp384");
+MODULE_ALIAS_CRYPTO("wp256");
 
 module_init(wp512_mod_init);
 module_exit(wp512_mod_fini);
--- a/crypto/zlib.c
+++ b/crypto/zlib.c
@@ -378,3 +378,4 @@ module_exit(zlib_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Zlib Compression Algorithm");
 MODULE_AUTHOR("Sony Corporation");
+MODULE_ALIAS_CRYPTO("zlib");
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -563,4 +563,4 @@ MODULE_DESCRIPTION("VIA PadLock AES algo
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michal Ludvig");
 
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -593,7 +593,7 @@ MODULE_DESCRIPTION("VIA PadLock SHA1/SHA
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michal Ludvig");
 
-MODULE_ALIAS("sha1-all");
-MODULE_ALIAS("sha256-all");
-MODULE_ALIAS("sha1-padlock");
-MODULE_ALIAS("sha256-padlock");
+MODULE_ALIAS_CRYPTO("sha1-all");
+MODULE_ALIAS_CRYPTO("sha256-all");
+MODULE_ALIAS_CRYPTO("sha1-padlock");
+MODULE_ALIAS_CRYPTO("sha256-padlock");
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -1775,7 +1775,7 @@ module_exit(ux500_cryp_mod_fini);
 module_param(cryp_mode, int, 0);
 
 MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 CRYP crypto engine.");
-MODULE_ALIAS("aes-all");
-MODULE_ALIAS("des-all");
+MODULE_ALIAS_CRYPTO("aes-all");
+MODULE_ALIAS_CRYPTO("des-all");
 
 MODULE_LICENSE("GPL");
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -1998,7 +1998,7 @@ module_exit(ux500_hash_mod_fini);
 MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 HASH engine.");
 MODULE_LICENSE("GPL");
 
-MODULE_ALIAS("sha1-all");
-MODULE_ALIAS("sha256-all");
-MODULE_ALIAS("hmac-sha1-all");
-MODULE_ALIAS("hmac-sha256-all");
+MODULE_ALIAS_CRYPTO("sha1-all");
+MODULE_ALIAS_CRYPTO("sha256-all");
+MODULE_ALIAS_CRYPTO("hmac-sha1-all");
+MODULE_ALIAS_CRYPTO("hmac-sha256-all");
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -44,6 +44,7 @@
 #include <linux/hrtimer.h>
 #include <linux/ktime.h>
 #include <asm/facility.h>
+#include <linux/crypto.h>
 
 #include "ap_bus.h"
 
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -26,6 +26,19 @@
 #include <linux/uaccess.h>
 
 /*
+ * Autoloaded crypto modules should only use a prefixed name to avoid allowing
+ * arbitrary modules to be loaded. Loading from userspace may still need the
+ * unprefixed names, so retains those aliases as well.
+ * This uses __MODULE_INFO directly instead of MODULE_ALIAS because pre-4.3
+ * gcc (e.g. avr32 toolchain) uses __LINE__ for uniqueness, and this macro
+ * expands twice on the same line. Instead, use a separate base name for the
+ * alias.
+ */
+#define MODULE_ALIAS_CRYPTO(name)	\
+		__MODULE_INFO(alias, alias_userspace, name);	\
+		__MODULE_INFO(alias, alias_crypto, "crypto-" name)
+
+/*
  * Algorithm masks and types.
  */
 #define CRYPTO_ALG_TYPE_MASK		0x0000000f

[PATCH 3.10 28/32] crypto: include crypto- module prefix in template

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 4943ba16bbc2db05115707b3ff7b4874e9e3c560 upstream.

This adds the module loading prefix "crypto-" to the template lookup
as well.

For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly
includes the "crypto-" prefix at every level, correctly rejecting "vfat":

	net-pf-38
	algif-hash
	crypto-vfat(blowfish)
	crypto-vfat(blowfish)-all
	crypto-vfat

Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/fpu.c |    3 +++
 crypto/algapi.c       |    4 ++--
 crypto/authenc.c      |    1 +
 crypto/authencesn.c   |    1 +
 crypto/cbc.c          |    1 +
 crypto/ccm.c          |    1 +
 crypto/chainiv.c      |    1 +
 crypto/cmac.c         |    1 +
 crypto/cryptd.c       |    1 +
 crypto/ctr.c          |    1 +
 crypto/cts.c          |    1 +
 crypto/ecb.c          |    1 +
 crypto/eseqiv.c       |    1 +
 crypto/gcm.c          |    1 +
 crypto/hmac.c         |    1 +
 crypto/lrw.c          |    1 +
 crypto/pcbc.c         |    1 +
 crypto/pcrypt.c       |    1 +
 crypto/seqiv.c        |    1 +
 crypto/vmac.c         |    1 +
 crypto/xcbc.c         |    1 +
 crypto/xts.c          |    1 +
 22 files changed, 25 insertions(+), 2 deletions(-)

--- a/arch/x86/crypto/fpu.c
+++ b/arch/x86/crypto/fpu.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/crypto.h>
 #include <asm/i387.h>
 
 struct crypto_fpu_ctx {
@@ -159,3 +160,5 @@ void __exit crypto_fpu_exit(void)
 {
 	crypto_unregister_template(&crypto_fpu_tmpl);
 }
+
+MODULE_ALIAS_CRYPTO("fpu");
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -495,8 +495,8 @@ static struct crypto_template *__crypto_
 
 struct crypto_template *crypto_lookup_template(const char *name)
 {
-	return try_then_request_module(__crypto_lookup_template(name), "%s",
-				       name);
+	return try_then_request_module(__crypto_lookup_template(name),
+				       "crypto-%s", name);
 }
 EXPORT_SYMBOL_GPL(crypto_lookup_template);
 
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -709,3 +709,4 @@ module_exit(crypto_authenc_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Simple AEAD wrapper for IPsec");
+MODULE_ALIAS_CRYPTO("authenc");
--- a/crypto/authencesn.c
+++ b/crypto/authencesn.c
@@ -832,3 +832,4 @@ module_exit(crypto_authenc_esn_module_ex
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Steffen Klassert <steffen.klassert@secunet.com>");
 MODULE_DESCRIPTION("AEAD wrapper for IPsec with extended sequence numbers");
+MODULE_ALIAS_CRYPTO("authencesn");
--- a/crypto/cbc.c
+++ b/crypto/cbc.c
@@ -289,3 +289,4 @@ module_exit(crypto_cbc_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CBC block cipher algorithm");
+MODULE_ALIAS_CRYPTO("cbc");
--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -881,3 +881,4 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Counter with CBC MAC");
 MODULE_ALIAS_CRYPTO("ccm_base");
 MODULE_ALIAS_CRYPTO("rfc4309");
+MODULE_ALIAS_CRYPTO("ccm");
--- a/crypto/chainiv.c
+++ b/crypto/chainiv.c
@@ -359,3 +359,4 @@ module_exit(chainiv_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Chain IV Generator");
+MODULE_ALIAS_CRYPTO("chainiv");
--- a/crypto/cmac.c
+++ b/crypto/cmac.c
@@ -313,3 +313,4 @@ module_exit(crypto_cmac_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CMAC keyed hash algorithm");
+MODULE_ALIAS_CRYPTO("cmac");
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -955,3 +955,4 @@ module_exit(cryptd_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Software async crypto daemon");
+MODULE_ALIAS_CRYPTO("cryptd");
--- a/crypto/ctr.c
+++ b/crypto/ctr.c
@@ -467,3 +467,4 @@ module_exit(crypto_ctr_module_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CTR Counter block mode");
 MODULE_ALIAS_CRYPTO("rfc3686");
+MODULE_ALIAS_CRYPTO("ctr");
--- a/crypto/cts.c
+++ b/crypto/cts.c
@@ -350,3 +350,4 @@ module_exit(crypto_cts_module_exit);
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("CTS-CBC CipherText Stealing for CBC");
+MODULE_ALIAS_CRYPTO("cts");
--- a/crypto/ecb.c
+++ b/crypto/ecb.c
@@ -185,3 +185,4 @@ module_exit(crypto_ecb_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("ECB block cipher algorithm");
+MODULE_ALIAS_CRYPTO("ecb");
--- a/crypto/eseqiv.c
+++ b/crypto/eseqiv.c
@@ -267,3 +267,4 @@ module_exit(eseqiv_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Encrypted Sequence Number IV Generator");
+MODULE_ALIAS_CRYPTO("eseqiv");
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -1444,3 +1444,4 @@ MODULE_AUTHOR("Mikko Herranen <mh1@iki.f
 MODULE_ALIAS_CRYPTO("gcm_base");
 MODULE_ALIAS_CRYPTO("rfc4106");
 MODULE_ALIAS_CRYPTO("rfc4543");
+MODULE_ALIAS_CRYPTO("gcm");
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -271,3 +271,4 @@ module_exit(hmac_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("HMAC hash algorithm");
+MODULE_ALIAS_CRYPTO("hmac");
--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -400,3 +400,4 @@ module_exit(crypto_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("LRW block cipher mode");
+MODULE_ALIAS_CRYPTO("lrw");
--- a/crypto/pcbc.c
+++ b/crypto/pcbc.c
@@ -295,3 +295,4 @@ module_exit(crypto_pcbc_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("PCBC block cipher algorithm");
+MODULE_ALIAS_CRYPTO("pcbc");
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -565,3 +565,4 @@ module_exit(pcrypt_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Steffen Klassert <steffen.klassert@secunet.com>");
 MODULE_DESCRIPTION("Parallel crypto wrapper");
+MODULE_ALIAS_CRYPTO("pcrypt");
--- a/crypto/seqiv.c
+++ b/crypto/seqiv.c
@@ -362,3 +362,4 @@ module_exit(seqiv_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Sequence Number IV Generator");
+MODULE_ALIAS_CRYPTO("seqiv");
--- a/crypto/vmac.c
+++ b/crypto/vmac.c
@@ -713,3 +713,4 @@ module_exit(vmac_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("VMAC hash algorithm");
+MODULE_ALIAS_CRYPTO("vmac");
--- a/crypto/xcbc.c
+++ b/crypto/xcbc.c
@@ -286,3 +286,4 @@ module_exit(crypto_xcbc_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("XCBC keyed hash algorithm");
+MODULE_ALIAS_CRYPTO("xcbc");
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -362,3 +362,4 @@ module_exit(crypto_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("XTS block cipher mode");
+MODULE_ALIAS_CRYPTO("xts");

[PATCH 3.10 29/32] crypto: add missing crypto module aliases

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit 3e14dcf7cb80b34a1f38b55bc96f02d23fdaaaaf upstream.

Commit 5d26a105b5a7 ("crypto: prefix module autoloading with "crypto-"")
changed the automatic module loading when requesting crypto algorithms
to prefix all module requests with "crypto-". This requires all crypto
modules to have a crypto specific module alias even if their file name
would otherwise match the requested crypto algorithm.

Even though commit 5d26a105b5a7 added those aliases for a vast amount of
modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO
annotations to those files to make them get loaded automatically, again.
This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work
with kernels v3.18 and below.

Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former
won't work for crypto modules any more.

Fixes: 5d26a105b5a7 ("crypto: prefix module autoloading with "crypto-"")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/crypto/sha1.c |    1 +
 crypto/aes_generic.c       |    1 +
 crypto/ansi_cprng.c        |    1 +
 crypto/blowfish_generic.c  |    1 +
 crypto/camellia_generic.c  |    1 +
 crypto/cast5_generic.c     |    1 +
 crypto/cast6_generic.c     |    1 +
 crypto/des_generic.c       |    5 +++--
 crypto/ghash-generic.c     |    1 +
 crypto/krng.c              |    1 +
 crypto/salsa20_generic.c   |    1 +
 crypto/serpent_generic.c   |    1 +
 crypto/sha1_generic.c      |    1 +
 crypto/sha256_generic.c    |    2 ++
 crypto/sha512_generic.c    |    2 ++
 crypto/tea.c               |    1 +
 crypto/tgr192.c            |    1 +
 crypto/twofish_generic.c   |    1 +
 crypto/wp512.c             |    1 +
 19 files changed, 23 insertions(+), 2 deletions(-)

--- a/arch/powerpc/crypto/sha1.c
+++ b/arch/powerpc/crypto/sha1.c
@@ -154,4 +154,5 @@ module_exit(sha1_powerpc_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
+MODULE_ALIAS_CRYPTO("sha1");
 MODULE_ALIAS_CRYPTO("sha1-powerpc");
--- a/crypto/aes_generic.c
+++ b/crypto/aes_generic.c
@@ -1475,3 +1475,4 @@ module_exit(aes_fini);
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS_CRYPTO("aes");
+MODULE_ALIAS_CRYPTO("aes-generic");
--- a/crypto/ansi_cprng.c
+++ b/crypto/ansi_cprng.c
@@ -477,3 +477,4 @@ MODULE_PARM_DESC(dbg, "Boolean to enable
 module_init(prng_mod_init);
 module_exit(prng_mod_fini);
 MODULE_ALIAS_CRYPTO("stdrng");
+MODULE_ALIAS_CRYPTO("ansi_cprng");
--- a/crypto/blowfish_generic.c
+++ b/crypto/blowfish_generic.c
@@ -139,3 +139,4 @@ module_exit(blowfish_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Blowfish Cipher Algorithm");
 MODULE_ALIAS_CRYPTO("blowfish");
+MODULE_ALIAS_CRYPTO("blowfish-generic");
--- a/crypto/camellia_generic.c
+++ b/crypto/camellia_generic.c
@@ -1099,3 +1099,4 @@ module_exit(camellia_fini);
 MODULE_DESCRIPTION("Camellia Cipher Algorithm");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-generic");
--- a/crypto/cast5_generic.c
+++ b/crypto/cast5_generic.c
@@ -550,3 +550,4 @@ module_exit(cast5_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cast5 Cipher Algorithm");
 MODULE_ALIAS_CRYPTO("cast5");
+MODULE_ALIAS_CRYPTO("cast5-generic");
--- a/crypto/cast6_generic.c
+++ b/crypto/cast6_generic.c
@@ -292,3 +292,4 @@ module_exit(cast6_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cast6 Cipher Algorithm");
 MODULE_ALIAS_CRYPTO("cast6");
+MODULE_ALIAS_CRYPTO("cast6-generic");
--- a/crypto/des_generic.c
+++ b/crypto/des_generic.c
@@ -971,8 +971,6 @@ static struct crypto_alg des_algs[2] = {
 	.cia_decrypt		=	des3_ede_decrypt } }
 } };
 
-MODULE_ALIAS_CRYPTO("des3_ede");
-
 static int __init des_generic_mod_init(void)
 {
 	return crypto_register_algs(des_algs, ARRAY_SIZE(des_algs));
@@ -990,3 +988,6 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
 MODULE_AUTHOR("Dag Arne Osvik <da@osvik.no>");
 MODULE_ALIAS_CRYPTO("des");
+MODULE_ALIAS_CRYPTO("des-generic");
+MODULE_ALIAS_CRYPTO("des3_ede");
+MODULE_ALIAS_CRYPTO("des3_ede-generic");
--- a/crypto/ghash-generic.c
+++ b/crypto/ghash-generic.c
@@ -173,3 +173,4 @@ module_exit(ghash_mod_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("GHASH Message Digest Algorithm");
 MODULE_ALIAS_CRYPTO("ghash");
+MODULE_ALIAS_CRYPTO("ghash-generic");
--- a/crypto/krng.c
+++ b/crypto/krng.c
@@ -63,3 +63,4 @@ module_exit(krng_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Kernel Random Number Generator");
 MODULE_ALIAS_CRYPTO("stdrng");
+MODULE_ALIAS_CRYPTO("krng");
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -249,3 +249,4 @@ module_exit(salsa20_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm");
 MODULE_ALIAS_CRYPTO("salsa20");
+MODULE_ALIAS_CRYPTO("salsa20-generic");
--- a/crypto/serpent_generic.c
+++ b/crypto/serpent_generic.c
@@ -667,3 +667,4 @@ MODULE_DESCRIPTION("Serpent and tnepres
 MODULE_AUTHOR("Dag Arne Osvik <osvik@ii.uib.no>");
 MODULE_ALIAS_CRYPTO("tnepres");
 MODULE_ALIAS_CRYPTO("serpent");
+MODULE_ALIAS_CRYPTO("serpent-generic");
--- a/crypto/sha1_generic.c
+++ b/crypto/sha1_generic.c
@@ -154,3 +154,4 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
 MODULE_ALIAS_CRYPTO("sha1");
+MODULE_ALIAS_CRYPTO("sha1-generic");
--- a/crypto/sha256_generic.c
+++ b/crypto/sha256_generic.c
@@ -385,4 +385,6 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm");
 
 MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha224-generic");
 MODULE_ALIAS_CRYPTO("sha256");
+MODULE_ALIAS_CRYPTO("sha256-generic");
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -286,4 +286,6 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-512 and SHA-384 Secure Hash Algorithms");
 
 MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha384-generic");
 MODULE_ALIAS_CRYPTO("sha512");
+MODULE_ALIAS_CRYPTO("sha512-generic");
--- a/crypto/tea.c
+++ b/crypto/tea.c
@@ -270,6 +270,7 @@ static void __exit tea_mod_fini(void)
 	crypto_unregister_algs(tea_algs, ARRAY_SIZE(tea_algs));
 }
 
+MODULE_ALIAS_CRYPTO("tea");
 MODULE_ALIAS_CRYPTO("xtea");
 MODULE_ALIAS_CRYPTO("xeta");
 
--- a/crypto/tgr192.c
+++ b/crypto/tgr192.c
@@ -676,6 +676,7 @@ static void __exit tgr192_mod_fini(void)
 	crypto_unregister_shashes(tgr_algs, ARRAY_SIZE(tgr_algs));
 }
 
+MODULE_ALIAS_CRYPTO("tgr192");
 MODULE_ALIAS_CRYPTO("tgr160");
 MODULE_ALIAS_CRYPTO("tgr128");
 
--- a/crypto/twofish_generic.c
+++ b/crypto/twofish_generic.c
@@ -212,3 +212,4 @@ module_exit(twofish_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Twofish Cipher Algorithm");
 MODULE_ALIAS_CRYPTO("twofish");
+MODULE_ALIAS_CRYPTO("twofish-generic");
--- a/crypto/wp512.c
+++ b/crypto/wp512.c
@@ -1167,6 +1167,7 @@ static void __exit wp512_mod_fini(void)
 	crypto_unregister_shashes(wp_algs, ARRAY_SIZE(wp_algs));
 }
 
+MODULE_ALIAS_CRYPTO("wp512");
 MODULE_ALIAS_CRYPTO("wp384");
 MODULE_ALIAS_CRYPTO("wp256");
 

[PATCH 3.10 30/32] quota: provide interface for readding allocated space into reserved space

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 1c8924eb106c1ac755d5d35ce9b3ff42e89e2511 upstream.

ext4 needs to convert allocated (metadata) blocks back into blocks
reserved for delayed allocation. Add functions into quota code for
supporting such operation.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Josh Hunt <johunt@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/quota/dquot.c         |   46 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/stat.c                |   11 +++++++++--
 include/linux/fs.h       |    1 +
 include/linux/quotaops.h |   15 +++++++++++++++
 4 files changed, 71 insertions(+), 2 deletions(-)

--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1102,6 +1102,14 @@ static void dquot_claim_reserved_space(s
 	dquot->dq_dqb.dqb_rsvspace -= number;
 }
 
+static void dquot_reclaim_reserved_space(struct dquot *dquot, qsize_t number)
+{
+	if (WARN_ON_ONCE(dquot->dq_dqb.dqb_curspace < number))
+		number = dquot->dq_dqb.dqb_curspace;
+	dquot->dq_dqb.dqb_rsvspace += number;
+	dquot->dq_dqb.dqb_curspace -= number;
+}
+
 static inline
 void dquot_free_reserved_space(struct dquot *dquot, qsize_t number)
 {
@@ -1536,6 +1544,15 @@ void inode_claim_rsv_space(struct inode
 }
 EXPORT_SYMBOL(inode_claim_rsv_space);
 
+void inode_reclaim_rsv_space(struct inode *inode, qsize_t number)
+{
+	spin_lock(&inode->i_lock);
+	*inode_reserved_space(inode) += number;
+	__inode_sub_bytes(inode, number);
+	spin_unlock(&inode->i_lock);
+}
+EXPORT_SYMBOL(inode_reclaim_rsv_space);
+
 void inode_sub_rsv_space(struct inode *inode, qsize_t number)
 {
 	spin_lock(&inode->i_lock);
@@ -1710,6 +1727,35 @@ int dquot_claim_space_nodirty(struct ino
 EXPORT_SYMBOL(dquot_claim_space_nodirty);
 
 /*
+ * Convert allocated space back to in-memory reserved quotas
+ */
+void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
+{
+	int cnt;
+
+	if (!dquot_active(inode)) {
+		inode_reclaim_rsv_space(inode, number);
+		return;
+	}
+
+	down_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
+	spin_lock(&dq_data_lock);
+	/* Claim reserved quotas to allocated quotas */
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+		if (inode->i_dquot[cnt])
+			dquot_reclaim_reserved_space(inode->i_dquot[cnt],
+						     number);
+	}
+	/* Update inode bytes */
+	inode_reclaim_rsv_space(inode, number);
+	spin_unlock(&dq_data_lock);
+	mark_all_dquot_dirty(inode->i_dquot);
+	up_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
+	return;
+}
+EXPORT_SYMBOL(dquot_reclaim_space_nodirty);
+
+/*
  * This operation can block, but only after everything is updated
  */
 void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -447,9 +447,8 @@ void inode_add_bytes(struct inode *inode
 
 EXPORT_SYMBOL(inode_add_bytes);
 
-void inode_sub_bytes(struct inode *inode, loff_t bytes)
+void __inode_sub_bytes(struct inode *inode, loff_t bytes)
 {
-	spin_lock(&inode->i_lock);
 	inode->i_blocks -= bytes >> 9;
 	bytes &= 511;
 	if (inode->i_bytes < bytes) {
@@ -457,6 +456,14 @@ void inode_sub_bytes(struct inode *inode
 		inode->i_bytes += 512;
 	}
 	inode->i_bytes -= bytes;
+}
+
+EXPORT_SYMBOL(__inode_sub_bytes);
+
+void inode_sub_bytes(struct inode *inode, loff_t bytes)
+{
+	spin_lock(&inode->i_lock);
+	__inode_sub_bytes(inode, bytes);
 	spin_unlock(&inode->i_lock);
 }
 
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2489,6 +2489,7 @@ extern void generic_fillattr(struct inod
 extern int vfs_getattr(struct path *, struct kstat *);
 void __inode_add_bytes(struct inode *inode, loff_t bytes);
 void inode_add_bytes(struct inode *inode, loff_t bytes);
+void __inode_sub_bytes(struct inode *inode, loff_t bytes);
 void inode_sub_bytes(struct inode *inode, loff_t bytes);
 loff_t inode_get_bytes(struct inode *inode);
 void inode_set_bytes(struct inode *inode, loff_t bytes);
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -41,6 +41,7 @@ void __quota_error(struct super_block *s
 void inode_add_rsv_space(struct inode *inode, qsize_t number);
 void inode_claim_rsv_space(struct inode *inode, qsize_t number);
 void inode_sub_rsv_space(struct inode *inode, qsize_t number);
+void inode_reclaim_rsv_space(struct inode *inode, qsize_t number);
 
 void dquot_initialize(struct inode *inode);
 void dquot_drop(struct inode *inode);
@@ -59,6 +60,7 @@ int dquot_alloc_inode(const struct inode
 
 int dquot_claim_space_nodirty(struct inode *inode, qsize_t number);
 void dquot_free_inode(const struct inode *inode);
+void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number);
 
 int dquot_disable(struct super_block *sb, int type, unsigned int flags);
 /* Suspend quotas on remount RO */
@@ -238,6 +240,13 @@ static inline int dquot_claim_space_nodi
 	return 0;
 }
 
+static inline int dquot_reclaim_space_nodirty(struct inode *inode,
+					      qsize_t number)
+{
+	inode_sub_bytes(inode, number);
+	return 0;
+}
+
 static inline int dquot_disable(struct super_block *sb, int type,
 		unsigned int flags)
 {
@@ -336,6 +345,12 @@ static inline int dquot_claim_block(stru
 	return ret;
 }
 
+static inline void dquot_reclaim_block(struct inode *inode, qsize_t nr)
+{
+	dquot_reclaim_space_nodirty(inode, nr << inode->i_blkbits);
+	mark_inode_dirty_sync(inode);
+}
+
 static inline void dquot_free_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	__dquot_free_space(inode, nr, 0);

[PATCH 3.10 31/32] ext4: fix warning in ext4_da_update_reserve_space()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 7d7345322d60edb0fa49a64a89b31360f01d09cb upstream.

reaim workfile.dbase test easily triggers warning in
ext4_da_update_reserve_space():

EXT4-fs warning (device ram0): ext4_da_update_reserve_space:365:
ino 12, allocated 1 with only 0 reserved metadata blocks (releasing 1
blocks with reserved 9 data blocks)

The problem is that (one of) tests creates file and then randomly writes
to it with O_SYNC. That results in writing back pages of the file in
random order so we create extents for written blocks say 0, 2, 4, 6, 8
- this last allocation also allocates new block for extents. Then we
writeout block 1 so we have extents 0-2, 4, 6, 8 and we release
indirect extent block because extents fit in the inode again. Then we
writeout block 10 and we need to allocate indirect extent block again
which triggers the warning because we don't have the reservation
anymore.

Fix the problem by giving back freed metadata blocks resulting from
extent merging into inode's reservation pool.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Josh Hunt <johunt@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ext4.h    |    1 +
 fs/ext4/extents.c |    3 ++-
 fs/ext4/mballoc.c |   21 +++++++++++++++++----
 3 files changed, 20 insertions(+), 5 deletions(-)

--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -589,6 +589,7 @@ enum {
 #define EXT4_FREE_BLOCKS_NO_QUOT_UPDATE	0x0008
 #define EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER	0x0010
 #define EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER	0x0020
+#define EXT4_FREE_BLOCKS_RESERVE		0x0040
 
 /*
  * Flags used by ext4_discard_partial_page_buffers
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1722,7 +1722,8 @@ static void ext4_ext_try_to_merge_up(han
 
 	brelse(path[1].p_bh);
 	ext4_free_blocks(handle, inode, NULL, blk, 1,
-			 EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET);
+			 EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET |
+			 EXT4_FREE_BLOCKS_RESERVE);
 }
 
 /*
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4610,6 +4610,7 @@ void ext4_free_blocks(handle_t *handle,
 	struct buffer_head *gd_bh;
 	ext4_group_t block_group;
 	struct ext4_sb_info *sbi;
+	struct ext4_inode_info *ei = EXT4_I(inode);
 	struct ext4_buddy e4b;
 	unsigned int count_clusters;
 	int err = 0;
@@ -4808,7 +4809,6 @@ do_more:
 	ext4_block_bitmap_csum_set(sb, block_group, gdp, bitmap_bh);
 	ext4_group_desc_csum_set(sb, block_group, gdp);
 	ext4_unlock_group(sb, block_group);
-	percpu_counter_add(&sbi->s_freeclusters_counter, count_clusters);
 
 	if (sbi->s_log_groups_per_flex) {
 		ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
@@ -4816,10 +4816,23 @@ do_more:
 			     &sbi->s_flex_groups[flex_group].free_clusters);
 	}
 
-	ext4_mb_unload_buddy(&e4b);
-
-	if (!(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
+	if (flags & EXT4_FREE_BLOCKS_RESERVE && ei->i_reserved_data_blocks) {
+		percpu_counter_add(&sbi->s_dirtyclusters_counter,
+				   count_clusters);
+		spin_lock(&ei->i_block_reservation_lock);
+		if (flags & EXT4_FREE_BLOCKS_METADATA)
+			ei->i_reserved_meta_blocks += count_clusters;
+		else
+			ei->i_reserved_data_blocks += count_clusters;
+		spin_unlock(&ei->i_block_reservation_lock);
+		if (!(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
+			dquot_reclaim_block(inode,
+					EXT4_C2B(sbi, count_clusters));
+	} else if (!(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
 		dquot_free_block(inode, EXT4_C2B(sbi, count_clusters));
+	percpu_counter_add(&sbi->s_freeclusters_counter, count_clusters);
+
+	ext4_mb_unload_buddy(&e4b);
 
 	/* We dirtied the bitmap block */
 	BUFFER_TRACE(bitmap_bh, "dirtied bitmap block");

[PATCH 3.10 32/32] md/raid5: fetch_block must fetch all the blocks handle_stripe_dirtying wants.

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.de>

commit 108cef3aa41669610e1836fe638812dd067d72de upstream.

It is critical that fetch_block() and handle_stripe_dirtying()
are consistent in their analysis of what needs to be loaded.
Otherwise raid5 can wait forever for a block that won't be loaded.

Currently when writing to a RAID5 that is resyncing, to a location
beyond the resync offset, handle_stripe_dirtying chooses a
reconstruct-write cycle, but fetch_block() assumes a
read-modify-write, and a lockup can happen.

So treat that case just like RAID6, just as we do in
handle_stripe_dirtying.  RAID6 always does reconstruct-write.

This bug was introduced when the behaviour of handle_stripe_dirtying
was changed in 3.7, so the patch is suitable for any kernel since,
though it will need careful merging for some versions.

Cc: stable@vger.kernel.org (v3.7+)
Fixes: a7854487cd7128a30a7f4f5259de9f67d5efb95f
Reported-by: Henry Cai <henryplusplus@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/raid5.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2678,7 +2678,8 @@ static int fetch_block(struct stripe_hea
 	     (s->failed >= 2 && fdev[1]->toread) ||
 	     (sh->raid_conf->level <= 5 && s->failed && fdev[0]->towrite &&
 	      !test_bit(R5_OVERWRITE, &fdev[0]->flags)) ||
-	     (sh->raid_conf->level == 6 && s->failed && s->to_write))) {
+	     ((sh->raid_conf->level == 6 || sh->sector >= sh->raid_conf->mddev->recovery_cp)
+	      && s->failed && s->to_write))) {
 		/* we would like to get this block, possibly by computing it,
 		 * otherwise read it if the backing disk is insync
 		 */

Re: [PATCH 3.10 06/32] scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore

[John Paul Adrian Glaubitz]

On 01/28/2015 02:26 AM, Greg Kroah-Hartman wrote:
> 3.10-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
> 
> commit 1caf6aaaa47471831d77c75f094d4e00ad1ec808 upstream.
> 
> Compiling SH with gcc-4.8 fails due to the -m32 option not being
> supported.

JFTR, I didn't test with earlier kernels than 3.18 yet but I assume
earlier versions will just compile fine as well.

Here's the log of a successful build of 3.18 with the patch applied:

>
http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.18.3-1~exp1&stamp=1422284071

Thanks for merging.

Cheers,
Adrian

-- 
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - glaubitz@debian.org
`. `'   Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913

Re: [PATCH 3.10 06/32] scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore

[Steven Rostedt]

On Wed, 28 Jan 2015 02:32:17 +0100
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> wrote:

> On 01/28/2015 02:26 AM, Greg Kroah-Hartman wrote:
> > 3.10-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
> > 
> > commit 1caf6aaaa47471831d77c75f094d4e00ad1ec808 upstream.
> > 
> > Compiling SH with gcc-4.8 fails due to the -m32 option not being
> > supported.
> 
> JFTR, I didn't test with earlier kernels than 3.18 yet but I assume
> earlier versions will just compile fine as well.
> 
> Here's the log of a successful build of 3.18 with the patch applied:
> 
> >
> http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.18.3-1~exp1&stamp=1422284071

I doubt it would have an issue with earlier kernels. Earlier compilers
are another story.

-- Steve

Re: [PATCH 3.10 00/32] 3.10.67-stable review

[Guenter Roeck]

On 01/27/2015 05:26 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.10.67 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Jan 30 01:26:04 UTC 2015.
> Anything received after that time might be too late.
>

Build results:
	total: 137 pass: 137 fail: 0
Qemu tests:
	total: 27 pass: 27 fail: 0

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

[PATCH v2] gpio: sysfs: fix gpio device-attribute leak

[Johan Hovold]

commit 0915e6feb38de8d3601819992a5bd050201a56fa upstream.

The gpio device attributes were never destroyed when the gpio was
unexported (or on export failures).

Use device_create_with_groups() to create the default device attributes
of the gpio class device. Note that this also fixes the
attribute-creation race with userspace for these attributes.

Remove contingent attributes in export error path and on unexport.

Fixes: d8f388d8dc8d ("gpio: sysfs interface")
Cc: stable <stable@vger.kernel.org> # v2.6.27+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---

Backport to v3.10 (and earlier) which lacks device_create_with_groups().

Changes since v1
 - fix mistake in backport, which removed the attributes while holding
   the mutex in gpiod_unexport (reported by Luis Henriques)


 drivers/gpio/gpiolib.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index bc3d59efe80b..4ff40cf14910 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -362,7 +362,7 @@ static ssize_t gpio_value_store(struct device *dev,
 	return status;
 }
 
-static const DEVICE_ATTR(value, 0644,
+static DEVICE_ATTR(value, 0644,
 		gpio_value_show, gpio_value_store);
 
 static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
@@ -580,17 +580,17 @@ static ssize_t gpio_active_low_store(struct device *dev,
 	return status ? : size;
 }
 
-static const DEVICE_ATTR(active_low, 0644,
+static DEVICE_ATTR(active_low, 0644,
 		gpio_active_low_show, gpio_active_low_store);
 
-static const struct attribute *gpio_attrs[] = {
+static struct attribute *gpio_attrs[] = {
 	&dev_attr_value.attr,
 	&dev_attr_active_low.attr,
 	NULL,
 };
 
 static const struct attribute_group gpio_attr_group = {
-	.attrs = (struct attribute **) gpio_attrs,
+	.attrs = gpio_attrs,
 };
 
 /*
@@ -806,20 +806,24 @@ static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 	if (direction_may_change) {
 		status = device_create_file(dev, &dev_attr_direction);
 		if (status)
-			goto fail_unregister_device;
+			goto fail_remove_attr_group;
 	}
 
 	if (gpiod_to_irq(desc) >= 0 && (direction_may_change ||
 				       !test_bit(FLAG_IS_OUT, &desc->flags))) {
 		status = device_create_file(dev, &dev_attr_edge);
 		if (status)
-			goto fail_unregister_device;
+			goto fail_remove_attr_direction;
 	}
 
 	set_bit(FLAG_EXPORT, &desc->flags);
 	mutex_unlock(&sysfs_lock);
 	return 0;
 
+fail_remove_attr_direction:
+	device_remove_file(dev, &dev_attr_direction);
+fail_remove_attr_group:
+	sysfs_remove_group(&dev->kobj, &gpio_attr_group);
 fail_unregister_device:
 	device_unregister(dev);
 fail_unlock:
@@ -971,6 +975,9 @@ static void gpiod_unexport(struct gpio_desc *desc)
 	mutex_unlock(&sysfs_lock);
 
 	if (dev) {
+		device_remove_file(dev, &dev_attr_edge);
+		device_remove_file(dev, &dev_attr_direction);
+		sysfs_remove_group(&dev->kobj, &gpio_attr_group);
 		device_unregister(dev);
 		put_device(dev);
 	}
-- 
2.0.5

Re: [PATCH 3.10 00/32] 3.10.67-stable review

[Shuah Khan]

On 01/27/2015 06:26 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.10.67 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Jan 30 01:26:04 UTC 2015.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.10.67-rc1.gz
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah



-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

Re: [PATCH v2] gpio: sysfs: fix gpio device-attribute leak

[Greg Kroah-Hartman]

On Wed, Jan 28, 2015 at 05:05:05PM +0100, Johan Hovold wrote:
> commit 0915e6feb38de8d3601819992a5bd050201a56fa upstream.
> 
> The gpio device attributes were never destroyed when the gpio was
> unexported (or on export failures).
> 
> Use device_create_with_groups() to create the default device attributes
> of the gpio class device. Note that this also fixes the
> attribute-creation race with userspace for these attributes.
> 
> Remove contingent attributes in export error path and on unexport.
> 
> Fixes: d8f388d8dc8d ("gpio: sysfs interface")
> Cc: stable <stable@vger.kernel.org> # v2.6.27+
> Signed-off-by: Johan Hovold <johan@kernel.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> 
> Backport to v3.10 (and earlier) which lacks device_create_with_groups().
> 
> Changes since v1
>  - fix mistake in backport, which removed the attributes while holding
>    the mutex in gpiod_unexport (reported by Luis Henriques)

Thanks for the updated patch, now replaced the old one with this one.

greg k-h