* [PATCH 2/6] ESI W192M : Update eeprom structure to C99 standard
[not found] <1426300302-20542-1-git-send-email-me>
@ 2015-03-14 2:31 ` klem.dev
2015-03-14 2:31 ` [PATCH 3/6] ESI W192M : Enable midi i/o port for envy24 chip klem.dev
` (3 subsequent siblings)
4 siblings, 0 replies; 15+ messages in thread
From: klem.dev @ 2015-03-14 2:31 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
From: Clément Guedez <klem.dev@gmail.com>
Update eeprom structure to C99 standard to be compliant with change in alsa.
It's just a notation change, no configuration change.
Signed-off-by: Clément Guedez <klem.dev@gmail.com>
diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
index f65ac19..6e1026e 100644
--- a/sound/pci/ice1712/wtm.c
+++ b/sound/pci/ice1712/wtm.c
@@ -485,19 +485,19 @@ static int wtm_init(struct snd_ice1712 *ice)
static unsigned char wtm_eeprom[] = {
- 0x47, /*SYSCONF: clock 192KHz, 4ADC, 8DAC */
- 0x80, /* ACLINK : I2S */
- 0xf8, /* I2S: vol; 96k, 24bit, 192k */
- 0xc1 /*SPDIF: out-en, spidf ext out*/,
- 0x9f, /* GPIO_DIR */
- 0xff, /* GPIO_DIR1 */
- 0x7f, /* GPIO_DIR2 */
- 0x9f, /* GPIO_MASK */
- 0xff, /* GPIO_MASK1 */
- 0x7f, /* GPIO_MASK2 */
- 0x16, /* GPIO_STATE */
- 0x80, /* GPIO_STATE1 */
- 0x00, /* GPIO_STATE2 */
+ [ICE_EEP2_SYSCONF] = 0x47, /*SYSCONF: clock 192KHz, 4ADC, 8DAC */
+ [ICE_EEP2_ACLINK] = 0x80, /* ACLINK : I2S */
+ [ICE_EEP2_I2S] = 0xf8, /* I2S: vol; 96k, 24bit, 192k */
+ [ICE_EEP2_SPDIF] = 0xc1, /*SPDIF: out-en, spidf ext out*/
+ [ICE_EEP2_GPIO_DIR] = 0x9f,
+ [ICE_EEP2_GPIO_DIR1] = 0xff,
+ [ICE_EEP2_GPIO_DIR2] = 0x7f,
+ [ICE_EEP2_GPIO_MASK] = 0x9f,
+ [ICE_EEP2_GPIO_MASK1] = 0xff,
+ [ICE_EEP2_GPIO_MASK2] = 0x7f,
+ [ICE_EEP2_GPIO_STATE] = 0x16,
+ [ICE_EEP2_GPIO_STATE1] = 0x80,
+ [ICE_EEP2_GPIO_STATE2] = 0x00,
};
--
2.1.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/6] ESI W192M : Enable midi i/o port for envy24 chip
[not found] <1426300302-20542-1-git-send-email-me>
2015-03-14 2:31 ` [PATCH 2/6] ESI W192M : Update eeprom structure to C99 standard klem.dev
@ 2015-03-14 2:31 ` klem.dev
2015-03-14 2:31 ` [PATCH 4/6] ESI W192M : Add TLV support to control volume using dB scale klem.dev
` (2 subsequent siblings)
4 siblings, 0 replies; 15+ messages in thread
From: klem.dev @ 2015-03-14 2:31 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
From: Clément Guedez <klem.dev@gmail.com>
Enable midi i/o port of envy24 chip as their are available on ESI W192M soundcard.
Signed-off-by: Clément Guedez <klem.dev@gmail.com>
diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
index 6e1026e..59483b4 100644
--- a/sound/pci/ice1712/wtm.c
+++ b/sound/pci/ice1712/wtm.c
@@ -485,7 +485,8 @@ static int wtm_init(struct snd_ice1712 *ice)
static unsigned char wtm_eeprom[] = {
- [ICE_EEP2_SYSCONF] = 0x47, /*SYSCONF: clock 192KHz, 4ADC, 8DAC */
+ [ICE_EEP2_SYSCONF] = 0x67, /*SYSCONF: clock 192KHz, mpu401,
+ 4ADC, 8DAC */
[ICE_EEP2_ACLINK] = 0x80, /* ACLINK : I2S */
[ICE_EEP2_I2S] = 0xf8, /* I2S: vol; 96k, 24bit, 192k */
[ICE_EEP2_SPDIF] = 0xc1, /*SPDIF: out-en, spidf ext out*/
--
2.1.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 4/6] ESI W192M : Add TLV support to control volume using dB scale
[not found] <1426300302-20542-1-git-send-email-me>
2015-03-14 2:31 ` [PATCH 2/6] ESI W192M : Update eeprom structure to C99 standard klem.dev
2015-03-14 2:31 ` [PATCH 3/6] ESI W192M : Enable midi i/o port for envy24 chip klem.dev
@ 2015-03-14 2:31 ` klem.dev
2015-03-14 4:01 ` Clément Guedez
2015-03-14 2:31 ` [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state klem.dev
2015-03-14 2:31 ` [PATCH 6/6] ESI W192M : Add sampling rate control of the ADC/DAC klem.dev
4 siblings, 1 reply; 15+ messages in thread
From: klem.dev @ 2015-03-14 2:31 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
From: Clément Guedez <klem.dev@gmail.com>
Add TLV support to control volume using dB scale for input and ouput on ESI W192M.
Signed-off-by: Clément Guedez <klem.dev@gmail.com>
diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
index 59483b4..3af9daf 100644
--- a/sound/pci/ice1712/wtm.c
+++ b/sound/pci/ice1712/wtm.c
@@ -29,6 +29,7 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <sound/core.h>
+#include <sound/tlv.h>
#include "ice1712.h"
#include "envy24ht.h"
@@ -380,17 +381,25 @@ static int stac9460_mic_sw_put(struct snd_kcontrol *kcontrol,
return change;
}
+
+/*Limits value in dB for fader*/
+static const DECLARE_TLV_DB_SCALE(db_scale_dac, -19125, 75, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_adc, 0, 150, 0);
+
/*
* Control tabs
*/
static struct snd_kcontrol_new stac9640_controls[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ),
.name = "Master Playback Switch",
.info = stac9460_dac_mute_info,
.get = stac9460_dac_mute_get,
.put = stac9460_dac_mute_put,
.private_value = 1
+ .tlv = { .p = db_scale_dac }
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -419,11 +428,15 @@ static struct snd_kcontrol_new stac9640_controls[] = {
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ),
+
.name = "DAC Volume",
.count = 8,
.info = stac9460_dac_vol_info,
.get = stac9460_dac_vol_get,
.put = stac9460_dac_vol_put,
+ .tlv = { .p = db_scale_dac }
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -435,12 +448,15 @@ static struct snd_kcontrol_new stac9640_controls[] = {
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ),
+
.name = "ADC Volume",
.count = 2,
.info = stac9460_adc_vol_info,
.get = stac9460_adc_vol_get,
.put = stac9460_adc_vol_put,
-
+ .tlv = { .p = db_scale_adc }
}
};
--
2.1.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state
[not found] <1426300302-20542-1-git-send-email-me>
` (2 preceding siblings ...)
2015-03-14 2:31 ` [PATCH 4/6] ESI W192M : Add TLV support to control volume using dB scale klem.dev
@ 2015-03-14 2:31 ` klem.dev
2015-03-14 8:10 ` Takashi Iwai
2015-03-14 2:31 ` [PATCH 6/6] ESI W192M : Add sampling rate control of the ADC/DAC klem.dev
4 siblings, 1 reply; 15+ messages in thread
From: klem.dev @ 2015-03-14 2:31 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
From: Clément Guedez <klem.dev@gmail.com>
Add text Line in/Mic for selecting input gain state in mixer for ESI W192M.
Signed-off-by: Clément Guedez <klem.dev@gmail.com>
diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
index 3af9daf..497ff1a 100644
--- a/sound/pci/ice1712/wtm.c
+++ b/sound/pci/ice1712/wtm.c
@@ -339,8 +339,23 @@ static int stac9460_adc_vol_put(struct snd_kcontrol *kcontrol,
/*
* MIC / LINE switch fonction
*/
+static int stac9460_mic_sw_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *texts[2] = { "Line In", "Mic" };
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+ uinfo->value.enumerated.item = uinfo->value.enumerated.items
+ - 1;
+ strcpy(uinfo->value.enumerated.name,
+ texts[uinfo->value.enumerated.item]);
+
+ return 0;
+}
-#define stac9460_mic_sw_info snd_ctl_boolean_mono_info
static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -354,7 +369,7 @@ static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
val = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
else
val = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
- ucontrol->value.integer.value[0] = ~val>>7 & 0x1;
+ ucontrol->value.enumerated.item[0] = (val >> 7) & 0x1;
return 0;
}
@@ -370,7 +385,7 @@ static int stac9460_mic_sw_put(struct snd_kcontrol *kcontrol,
old = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
else
old = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
- new = (~ucontrol->value.integer.value[0] << 7 & 0x80) | (old & ~0x80);
+ new = (ucontrol->value.enumerated.item[0] << 7 & 0x80) | (old & ~0x80);
change = (new != old);
if (change) {
if (id == 0)
--
2.1.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 6/6] ESI W192M : Add sampling rate control of the ADC/DAC
[not found] <1426300302-20542-1-git-send-email-me>
` (3 preceding siblings ...)
2015-03-14 2:31 ` [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state klem.dev
@ 2015-03-14 2:31 ` klem.dev
2015-03-14 4:02 ` Clément Guedez
4 siblings, 1 reply; 15+ messages in thread
From: klem.dev @ 2015-03-14 2:31 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
From: Clément Guedez <klem.dev@gmail.com>
Add sampling rate control for ADC/DAC for ESI W192M.
Allow to switch between 48K/96K/192K sampling rate.
All DAC need to be mute when changing samplerate.
Signed-off-by: Clément Guedez <klem.dev@gmail.com>
diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
index 497ff1a..4140200 100644
--- a/sound/pci/ice1712/wtm.c
+++ b/sound/pci/ice1712/wtm.c
@@ -30,12 +30,18 @@
#include <linux/init.h>
#include <sound/core.h>
#include <sound/tlv.h>
+#include <linux/slab.h>
#include "ice1712.h"
#include "envy24ht.h"
#include "wtm.h"
#include "stac946x.h"
+struct wtm_spec {
+ /* rate change needs atomic mute/unmute of all dacs*/
+ struct mutex mute_mutex;
+};
+
/*
* 2*ADC 6*DAC no1 ringbuffer r/w on i2c bus
@@ -69,15 +75,68 @@ static inline unsigned char stac9460_2_get(struct snd_ice1712 *ice, int reg)
/*
* DAC mute control
*/
+static void stac9460_dac_mute_all(struct snd_ice1712 *ice, unsigned char mute,
+ unsigned short int *change_mask)
+{
+ unsigned char new, old;
+ int id, idx, change;
+
+ /*stac9460 1*/
+ for (id = 0; id < 7; id++) {
+ if (*change_mask & (0x01 << id)) {
+ if(id == 0){
+ idx = STAC946X_MASTER_VOLUME;
+ }else{
+ idx = STAC946X_LF_VOLUME - 1 + id;
+ }
+ old = stac9460_get(ice, idx);
+ new = (~mute << 7 & 0x80) | (old & ~0x80);
+ change = (new != old);
+ if (change){
+ stac9460_put(ice, idx, new);
+ *change_mask = *change_mask | (0x01 << id);
+ }else{
+ *change_mask = *change_mask & ~(0x01 << id);
+ }
+ }
+ }
+
+ /*stac9460 2*/
+ for (id = 0; id < 3; id++) {
+ if (*change_mask & (0x01 << (idx + 7))) {
+ if(id == 0){
+ idx = STAC946X_MASTER_VOLUME;
+ }else{
+ idx = STAC946X_LF_VOLUME - 1 + id;
+ }
+
+ old = stac9460_2_get(ice, idx);
+ new = (~mute << 7 & 0x80) | (old & ~0x80);
+ change = (new != old);
+ if (change){
+ stac9460_2_put(ice, idx, new);
+ *change_mask = *change_mask | (0x01 << id);
+ }else{
+ *change_mask = *change_mask & ~(0x01 << id);
+ }
+ }
+ }
+}
+
+
+
#define stac9460_dac_mute_info snd_ctl_boolean_mono_info
static int stac9460_dac_mute_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ struct wtm_spec *spec = ice->spec;
unsigned char val;
int idx, id;
+ mutex_lock(&spec->mute_mutex);
+
if (kcontrol->private_value) {
idx = STAC946X_MASTER_VOLUME;
id = 0;
@@ -90,6 +149,8 @@ static int stac9460_dac_mute_get(struct snd_kcontrol *kcontrol,
else
val = stac9460_2_get(ice, idx - 6);
ucontrol->value.integer.value[0] = (~val >> 7) & 0x1;
+
+ mutex_unlock(&spec->mute_mutex);
return 0;
}
@@ -397,6 +458,44 @@ static int stac9460_mic_sw_put(struct snd_kcontrol *kcontrol,
}
+/*
+ * Handler for setting correct codec rate - called when rate change is detected
+ */
+static void stac9460_set_rate_val(struct snd_ice1712 *ice, unsigned int rate)
+{
+ unsigned char old, new;
+ unsigned short int changed;
+ struct wtm_spec *spec = ice->spec;
+
+ if (rate == 0) /* no hint - S/PDIF input is master, simply return */
+ return;
+ else if (rate <= 48000)
+ new = 0x08; /* 256x, base rate mode */
+ else if (rate <= 96000)
+ new = 0x11; /* 256x, mid rate mode */
+ else
+ new = 0x12; /* 128x, high rate mode */
+
+ old = stac9460_get(ice, STAC946X_MASTER_CLOCKING);
+ if (old == new)
+ return;
+ /* change detected, setting master clock, muting first */
+ /* due to possible conflicts with mute controls - mutexing */
+ mutex_lock(&spec->mute_mutex);
+ /* we have to remember current mute status for each DAC */
+ changed = 0xFFFF;
+ stac9460_dac_mute_all(ice, 0, &changed);
+ /*printk(KERN_DEBUG "Rate change: %d, new MC: 0x%02x\n", rate, new);*/
+ stac9460_put(ice, STAC946X_MASTER_CLOCKING, new);
+ stac9460_2_put(ice, STAC946X_MASTER_CLOCKING, new);
+ udelay(10);
+ /* unmuting - only originally unmuted dacs -
+ * i.e. those changed when muting */
+ stac9460_dac_mute_all(ice, 1, &changed);
+ mutex_unlock(&spec->mute_mutex);
+}
+
+
/*Limits value in dB for fader*/
static const DECLARE_TLV_DB_SCALE(db_scale_dac, -19125, 75, 0);
static const DECLARE_TLV_DB_SCALE(db_scale_adc, 0, 150, 0);
@@ -496,21 +595,32 @@ static int wtm_init(struct snd_ice1712 *ice)
{
static unsigned short stac_inits_wtm[] = {
STAC946X_RESET, 0,
+ STAC946X_MASTER_CLOCKING, 0x11,
(unsigned short)-1
};
unsigned short *p;
+ struct wtm_spec *spec;
/*WTM 192M*/
ice->num_total_dacs = 8;
ice->num_total_adcs = 4;
ice->force_rdma1 = 1;
+ /*init mutex for dac mute conflict*/
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ ice->spec = spec;
+ mutex_init(&spec->mute_mutex);
+
+
/*initialize codec*/
p = stac_inits_wtm;
for (; *p != (unsigned short)-1; p += 2) {
stac9460_put(ice, p[0], p[1]);
stac9460_2_put(ice, p[0], p[1]);
}
+ ice->gpio.set_pro_rate = stac9460_set_rate_val;
return 0;
}
--
2.1.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 4/6] ESI W192M : Add TLV support to control volume using dB scale
2015-03-14 2:31 ` [PATCH 4/6] ESI W192M : Add TLV support to control volume using dB scale klem.dev
@ 2015-03-14 4:01 ` Clément Guedez
2015-03-14 8:11 ` Takashi Iwai
0 siblings, 1 reply; 15+ messages in thread
From: Clément Guedez @ 2015-03-14 4:01 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
Hi,
sorry there is an error on this patch, please ignore it.
I will send the correct one.
Thanks
2015-03-14 3:31 GMT+01:00 <klem.dev@gmail.com>:
> From: Clément Guedez <klem.dev@gmail.com>
>
> Add TLV support to control volume using dB scale for input and ouput on
> ESI W192M.
>
>
> Signed-off-by: Clément Guedez <klem.dev@gmail.com>
>
> diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
> index 59483b4..3af9daf 100644
> --- a/sound/pci/ice1712/wtm.c
> +++ b/sound/pci/ice1712/wtm.c
> @@ -29,6 +29,7 @@
> #include <linux/interrupt.h>
> #include <linux/init.h>
> #include <sound/core.h>
> +#include <sound/tlv.h>
>
> #include "ice1712.h"
> #include "envy24ht.h"
> @@ -380,17 +381,25 @@ static int stac9460_mic_sw_put(struct snd_kcontrol
> *kcontrol,
> return change;
> }
>
> +
> +/*Limits value in dB for fader*/
> +static const DECLARE_TLV_DB_SCALE(db_scale_dac, -19125, 75, 0);
> +static const DECLARE_TLV_DB_SCALE(db_scale_adc, 0, 150, 0);
> +
> /*
> * Control tabs
> */
> static struct snd_kcontrol_new stac9640_controls[] = {
> {
> .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
> + SNDRV_CTL_ELEM_ACCESS_TLV_READ),
> .name = "Master Playback Switch",
> .info = stac9460_dac_mute_info,
> .get = stac9460_dac_mute_get,
> .put = stac9460_dac_mute_put,
> .private_value = 1
> + .tlv = { .p = db_scale_dac }
> },
> {
> .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> @@ -419,11 +428,15 @@ static struct snd_kcontrol_new stac9640_controls[] =
> {
> },
> {
> .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
> + SNDRV_CTL_ELEM_ACCESS_TLV_READ),
> +
> .name = "DAC Volume",
> .count = 8,
> .info = stac9460_dac_vol_info,
> .get = stac9460_dac_vol_get,
> .put = stac9460_dac_vol_put,
> + .tlv = { .p = db_scale_dac }
> },
> {
> .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> @@ -435,12 +448,15 @@ static struct snd_kcontrol_new stac9640_controls[] =
> {
> },
> {
> .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
> + SNDRV_CTL_ELEM_ACCESS_TLV_READ),
> +
> .name = "ADC Volume",
> .count = 2,
> .info = stac9460_adc_vol_info,
> .get = stac9460_adc_vol_get,
> .put = stac9460_adc_vol_put,
> -
> + .tlv = { .p = db_scale_adc }
> }
> };
>
> --
> 2.1.4
>
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 6/6] ESI W192M : Add sampling rate control of the ADC/DAC
2015-03-14 2:31 ` [PATCH 6/6] ESI W192M : Add sampling rate control of the ADC/DAC klem.dev
@ 2015-03-14 4:02 ` Clément Guedez
0 siblings, 0 replies; 15+ messages in thread
From: Clément Guedez @ 2015-03-14 4:02 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
Hi,
sorry there is an error on this patch, please ignore it.
I will send the correct one.
Thanks
2015-03-14 3:31 GMT+01:00 <klem.dev@gmail.com>:
> From: Clément Guedez <klem.dev@gmail.com>
>
> Add sampling rate control for ADC/DAC for ESI W192M.
> Allow to switch between 48K/96K/192K sampling rate.
> All DAC need to be mute when changing samplerate.
>
> Signed-off-by: Clément Guedez <klem.dev@gmail.com>
>
> diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
> index 497ff1a..4140200 100644
> --- a/sound/pci/ice1712/wtm.c
> +++ b/sound/pci/ice1712/wtm.c
> @@ -30,12 +30,18 @@
> #include <linux/init.h>
> #include <sound/core.h>
> #include <sound/tlv.h>
> +#include <linux/slab.h>
>
> #include "ice1712.h"
> #include "envy24ht.h"
> #include "wtm.h"
> #include "stac946x.h"
>
> +struct wtm_spec {
> + /* rate change needs atomic mute/unmute of all dacs*/
> + struct mutex mute_mutex;
> +};
> +
>
> /*
> * 2*ADC 6*DAC no1 ringbuffer r/w on i2c bus
> @@ -69,15 +75,68 @@ static inline unsigned char stac9460_2_get(struct
> snd_ice1712 *ice, int reg)
> /*
> * DAC mute control
> */
> +static void stac9460_dac_mute_all(struct snd_ice1712 *ice, unsigned char
> mute,
> + unsigned short int *change_mask)
> +{
> + unsigned char new, old;
> + int id, idx, change;
> +
> + /*stac9460 1*/
> + for (id = 0; id < 7; id++) {
> + if (*change_mask & (0x01 << id)) {
> + if(id == 0){
> + idx = STAC946X_MASTER_VOLUME;
> + }else{
> + idx = STAC946X_LF_VOLUME - 1 + id;
> + }
> + old = stac9460_get(ice, idx);
> + new = (~mute << 7 & 0x80) | (old & ~0x80);
> + change = (new != old);
> + if (change){
> + stac9460_put(ice, idx, new);
> + *change_mask = *change_mask | (0x01 << id);
> + }else{
> + *change_mask = *change_mask & ~(0x01 <<
> id);
> + }
> + }
> + }
> +
> + /*stac9460 2*/
> + for (id = 0; id < 3; id++) {
> + if (*change_mask & (0x01 << (idx + 7))) {
> + if(id == 0){
> + idx = STAC946X_MASTER_VOLUME;
> + }else{
> + idx = STAC946X_LF_VOLUME - 1 + id;
> + }
> +
> + old = stac9460_2_get(ice, idx);
> + new = (~mute << 7 & 0x80) | (old & ~0x80);
> + change = (new != old);
> + if (change){
> + stac9460_2_put(ice, idx, new);
> + *change_mask = *change_mask | (0x01 << id);
> + }else{
> + *change_mask = *change_mask & ~(0x01 <<
> id);
> + }
> + }
> + }
> +}
> +
> +
> +
> #define stac9460_dac_mute_info snd_ctl_boolean_mono_info
>
> static int stac9460_dac_mute_get(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol)
> {
> struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
> + struct wtm_spec *spec = ice->spec;
> unsigned char val;
> int idx, id;
>
> + mutex_lock(&spec->mute_mutex);
> +
> if (kcontrol->private_value) {
> idx = STAC946X_MASTER_VOLUME;
> id = 0;
> @@ -90,6 +149,8 @@ static int stac9460_dac_mute_get(struct snd_kcontrol
> *kcontrol,
> else
> val = stac9460_2_get(ice, idx - 6);
> ucontrol->value.integer.value[0] = (~val >> 7) & 0x1;
> +
> + mutex_unlock(&spec->mute_mutex);
> return 0;
> }
>
> @@ -397,6 +458,44 @@ static int stac9460_mic_sw_put(struct snd_kcontrol
> *kcontrol,
> }
>
>
> +/*
> + * Handler for setting correct codec rate - called when rate change is
> detected
> + */
> +static void stac9460_set_rate_val(struct snd_ice1712 *ice, unsigned int
> rate)
> +{
> + unsigned char old, new;
> + unsigned short int changed;
> + struct wtm_spec *spec = ice->spec;
> +
> + if (rate == 0) /* no hint - S/PDIF input is master, simply return
> */
> + return;
> + else if (rate <= 48000)
> + new = 0x08; /* 256x, base rate mode */
> + else if (rate <= 96000)
> + new = 0x11; /* 256x, mid rate mode */
> + else
> + new = 0x12; /* 128x, high rate mode */
> +
> + old = stac9460_get(ice, STAC946X_MASTER_CLOCKING);
> + if (old == new)
> + return;
> + /* change detected, setting master clock, muting first */
> + /* due to possible conflicts with mute controls - mutexing */
> + mutex_lock(&spec->mute_mutex);
> + /* we have to remember current mute status for each DAC */
> + changed = 0xFFFF;
> + stac9460_dac_mute_all(ice, 0, &changed);
> + /*printk(KERN_DEBUG "Rate change: %d, new MC: 0x%02x\n", rate,
> new);*/
> + stac9460_put(ice, STAC946X_MASTER_CLOCKING, new);
> + stac9460_2_put(ice, STAC946X_MASTER_CLOCKING, new);
> + udelay(10);
> + /* unmuting - only originally unmuted dacs -
> + * i.e. those changed when muting */
> + stac9460_dac_mute_all(ice, 1, &changed);
> + mutex_unlock(&spec->mute_mutex);
> +}
> +
> +
> /*Limits value in dB for fader*/
> static const DECLARE_TLV_DB_SCALE(db_scale_dac, -19125, 75, 0);
> static const DECLARE_TLV_DB_SCALE(db_scale_adc, 0, 150, 0);
> @@ -496,21 +595,32 @@ static int wtm_init(struct snd_ice1712 *ice)
> {
> static unsigned short stac_inits_wtm[] = {
> STAC946X_RESET, 0,
> + STAC946X_MASTER_CLOCKING, 0x11,
> (unsigned short)-1
> };
> unsigned short *p;
> + struct wtm_spec *spec;
>
> /*WTM 192M*/
> ice->num_total_dacs = 8;
> ice->num_total_adcs = 4;
> ice->force_rdma1 = 1;
>
> + /*init mutex for dac mute conflict*/
> + spec = kzalloc(sizeof(*spec), GFP_KERNEL);
> + if (!spec)
> + return -ENOMEM;
> + ice->spec = spec;
> + mutex_init(&spec->mute_mutex);
> +
> +
> /*initialize codec*/
> p = stac_inits_wtm;
> for (; *p != (unsigned short)-1; p += 2) {
> stac9460_put(ice, p[0], p[1]);
> stac9460_2_put(ice, p[0], p[1]);
> }
> + ice->gpio.set_pro_rate = stac9460_set_rate_val;
> return 0;
> }
>
> --
> 2.1.4
>
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state
2015-03-14 2:31 ` [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state klem.dev
@ 2015-03-14 8:10 ` Takashi Iwai
2015-03-14 13:45 ` Clément Guedez
0 siblings, 1 reply; 15+ messages in thread
From: Takashi Iwai @ 2015-03-14 8:10 UTC (permalink / raw)
To: klem.dev; +Cc: alsa-devel
At Sat, 14 Mar 2015 03:31:41 +0100,
klem.dev@gmail.com wrote:
>
> From: Clément Guedez <klem.dev@gmail.com>
>
> Add text Line in/Mic for selecting input gain state in mixer for ESI W192M.
>
> Signed-off-by: Clément Guedez <klem.dev@gmail.com>
>
> diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
> index 3af9daf..497ff1a 100644
> --- a/sound/pci/ice1712/wtm.c
> +++ b/sound/pci/ice1712/wtm.c
> @@ -339,8 +339,23 @@ static int stac9460_adc_vol_put(struct snd_kcontrol *kcontrol,
> /*
> * MIC / LINE switch fonction
> */
> +static int stac9460_mic_sw_info(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + static char *texts[2] = { "Line In", "Mic" };
> +
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
> + uinfo->count = 1;
> + uinfo->value.enumerated.items = 2;
> + if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
> + uinfo->value.enumerated.item = uinfo->value.enumerated.items
> + - 1;
> + strcpy(uinfo->value.enumerated.name,
> + texts[uinfo->value.enumerated.item]);
> +
> + return 0;
You can use snd_ctl_enum_info() helper.
Also, if you change from a switch to an enum, fix the control name
suffix, too.
Takashi
> +}
>
> -#define stac9460_mic_sw_info snd_ctl_boolean_mono_info
>
> static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol)
> @@ -354,7 +369,7 @@ static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
> val = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
> else
> val = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
> - ucontrol->value.integer.value[0] = ~val>>7 & 0x1;
> + ucontrol->value.enumerated.item[0] = (val >> 7) & 0x1;
> return 0;
> }
>
> @@ -370,7 +385,7 @@ static int stac9460_mic_sw_put(struct snd_kcontrol *kcontrol,
> old = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
> else
> old = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
> - new = (~ucontrol->value.integer.value[0] << 7 & 0x80) | (old & ~0x80);
> + new = (ucontrol->value.enumerated.item[0] << 7 & 0x80) | (old & ~0x80);
> change = (new != old);
> if (change) {
> if (id == 0)
> --
> 2.1.4
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 4/6] ESI W192M : Add TLV support to control volume using dB scale
2015-03-14 4:01 ` Clément Guedez
@ 2015-03-14 8:11 ` Takashi Iwai
0 siblings, 0 replies; 15+ messages in thread
From: Takashi Iwai @ 2015-03-14 8:11 UTC (permalink / raw)
To: Clément Guedez; +Cc: alsa-devel
At Sat, 14 Mar 2015 05:01:50 +0100,
Clément Guedez wrote:
>
> Hi,
>
> sorry there is an error on this patch, please ignore it.
> I will send the correct one.
Could you resend rather a full patchset after the whole corrections?
thanks,
Takashi
>
> Thanks
>
> 2015-03-14 3:31 GMT+01:00 <klem.dev@gmail.com>:
>
> > From: Clément Guedez <klem.dev@gmail.com>
> >
> > Add TLV support to control volume using dB scale for input and ouput on
> > ESI W192M.
> >
> >
> > Signed-off-by: Clément Guedez <klem.dev@gmail.com>
> >
> > diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
> > index 59483b4..3af9daf 100644
> > --- a/sound/pci/ice1712/wtm.c
> > +++ b/sound/pci/ice1712/wtm.c
> > @@ -29,6 +29,7 @@
> > #include <linux/interrupt.h>
> > #include <linux/init.h>
> > #include <sound/core.h>
> > +#include <sound/tlv.h>
> >
> > #include "ice1712.h"
> > #include "envy24ht.h"
> > @@ -380,17 +381,25 @@ static int stac9460_mic_sw_put(struct snd_kcontrol
> > *kcontrol,
> > return change;
> > }
> >
> > +
> > +/*Limits value in dB for fader*/
> > +static const DECLARE_TLV_DB_SCALE(db_scale_dac, -19125, 75, 0);
> > +static const DECLARE_TLV_DB_SCALE(db_scale_adc, 0, 150, 0);
> > +
> > /*
> > * Control tabs
> > */
> > static struct snd_kcontrol_new stac9640_controls[] = {
> > {
> > .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> > + .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
> > + SNDRV_CTL_ELEM_ACCESS_TLV_READ),
> > .name = "Master Playback Switch",
> > .info = stac9460_dac_mute_info,
> > .get = stac9460_dac_mute_get,
> > .put = stac9460_dac_mute_put,
> > .private_value = 1
> > + .tlv = { .p = db_scale_dac }
> > },
> > {
> > .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> > @@ -419,11 +428,15 @@ static struct snd_kcontrol_new stac9640_controls[] =
> > {
> > },
> > {
> > .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> > + .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
> > + SNDRV_CTL_ELEM_ACCESS_TLV_READ),
> > +
> > .name = "DAC Volume",
> > .count = 8,
> > .info = stac9460_dac_vol_info,
> > .get = stac9460_dac_vol_get,
> > .put = stac9460_dac_vol_put,
> > + .tlv = { .p = db_scale_dac }
> > },
> > {
> > .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> > @@ -435,12 +448,15 @@ static struct snd_kcontrol_new stac9640_controls[] =
> > {
> > },
> > {
> > .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> > + .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
> > + SNDRV_CTL_ELEM_ACCESS_TLV_READ),
> > +
> > .name = "ADC Volume",
> > .count = 2,
> > .info = stac9460_adc_vol_info,
> > .get = stac9460_adc_vol_get,
> > .put = stac9460_adc_vol_put,
> > -
> > + .tlv = { .p = db_scale_adc }
> > }
> > };
> >
> > --
> > 2.1.4
> >
> >
> [2 <text/html; UTF-8 (quoted-printable)>]
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state
2015-03-14 8:10 ` Takashi Iwai
@ 2015-03-14 13:45 ` Clément Guedez
0 siblings, 0 replies; 15+ messages in thread
From: Clément Guedez @ 2015-03-14 13:45 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Hi,
I had a look on the snd_ctl_enum_info function, it will be better with it
for sure.
Excuse me, but what do you mean by the control name suffix ?
After correcting those, I will send the whole patchset.
Thanks
2015-03-14 9:10 GMT+01:00 Takashi Iwai <tiwai@suse.de>:
> At Sat, 14 Mar 2015 03:31:41 +0100,
> klem.dev@gmail.com wrote:
> >
> > From: Clément Guedez <klem.dev@gmail.com>
> >
> > Add text Line in/Mic for selecting input gain state in mixer for ESI
> W192M.
> >
> > Signed-off-by: Clément Guedez <klem.dev@gmail.com>
> >
> > diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
> > index 3af9daf..497ff1a 100644
> > --- a/sound/pci/ice1712/wtm.c
> > +++ b/sound/pci/ice1712/wtm.c
> > @@ -339,8 +339,23 @@ static int stac9460_adc_vol_put(struct snd_kcontrol
> *kcontrol,
> > /*
> > * MIC / LINE switch fonction
> > */
> > +static int stac9460_mic_sw_info(struct snd_kcontrol *kcontrol,
> > + struct snd_ctl_elem_info *uinfo)
> > +{
> > + static char *texts[2] = { "Line In", "Mic" };
> > +
> > + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
> > + uinfo->count = 1;
> > + uinfo->value.enumerated.items = 2;
> > + if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
> > + uinfo->value.enumerated.item =
> uinfo->value.enumerated.items
> > + - 1;
> > + strcpy(uinfo->value.enumerated.name,
> > + texts[uinfo->value.enumerated.item]);
> > +
> > + return 0;
>
> You can use snd_ctl_enum_info() helper.
>
> Also, if you change from a switch to an enum, fix the control name
> suffix, too.
>
>
> Takashi
>
>
> > +}
> >
> > -#define stac9460_mic_sw_info snd_ctl_boolean_mono_info
> >
> > static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
> > struct snd_ctl_elem_value *ucontrol)
> > @@ -354,7 +369,7 @@ static int stac9460_mic_sw_get(struct snd_kcontrol
> *kcontrol,
> > val = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
> > else
> > val = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
> > - ucontrol->value.integer.value[0] = ~val>>7 & 0x1;
> > + ucontrol->value.enumerated.item[0] = (val >> 7) & 0x1;
> > return 0;
> > }
> >
> > @@ -370,7 +385,7 @@ static int stac9460_mic_sw_put(struct snd_kcontrol
> *kcontrol,
> > old = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
> > else
> > old = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
> > - new = (~ucontrol->value.integer.value[0] << 7 & 0x80) | (old &
> ~0x80);
> > + new = (ucontrol->value.enumerated.item[0] << 7 & 0x80) | (old &
> ~0x80);
> > change = (new != old);
> > if (change) {
> > if (id == 0)
> > --
> > 2.1.4
> >
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state
[not found] <1426641991-3694-1-git-send-email-me>
@ 2015-03-18 1:26 ` klem.dev
0 siblings, 0 replies; 15+ messages in thread
From: klem.dev @ 2015-03-18 1:26 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
From: Clément Guedez <klem.dev@gmail.com>
Add text Line in/Mic for selecting input gain state in mixer for ESI W192M.
Signed-off-by: Clément Guedez <klem.dev@gmail.com>
diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
index c7ffafa..6d3412f 100644
--- a/sound/pci/ice1712/wtm.c
+++ b/sound/pci/ice1712/wtm.c
@@ -339,8 +339,14 @@ static int stac9460_adc_vol_put(struct snd_kcontrol *kcontrol,
/*
* MIC / LINE switch fonction
*/
+static int stac9460_mic_sw_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char * const texts[2] = { "Line In", "Mic" };
+
+ return snd_ctl_enum_info(uinfo, 1, 2, texts);
+}
-#define stac9460_mic_sw_info snd_ctl_boolean_mono_info
static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -354,7 +360,7 @@ static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
val = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
else
val = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
- ucontrol->value.integer.value[0] = ~val>>7 & 0x1;
+ ucontrol->value.enumerated.item[0] = (val >> 7) & 0x1;
return 0;
}
@@ -370,7 +376,7 @@ static int stac9460_mic_sw_put(struct snd_kcontrol *kcontrol,
old = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
else
old = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
- new = (~ucontrol->value.integer.value[0] << 7 & 0x80) | (old & ~0x80);
+ new = (ucontrol->value.enumerated.item[0] << 7 & 0x80) | (old & ~0x80);
change = (new != old);
if (change) {
if (id == 0)
@@ -411,7 +417,7 @@ static struct snd_kcontrol_new stac9640_controls[] = {
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "MIC/Line switch",
+ .name = "MIC/Line Input Enum",
.count = 2,
.info = stac9460_mic_sw_info,
.get = stac9460_mic_sw_get,
--
2.1.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state
2015-03-16 14:54 ` Clément Guedez
@ 2015-03-16 14:55 ` Takashi Iwai
0 siblings, 0 replies; 15+ messages in thread
From: Takashi Iwai @ 2015-03-16 14:55 UTC (permalink / raw)
To: Clément Guedez; +Cc: alsa-devel
At Mon, 16 Mar 2015 15:54:43 +0100,
Clément Guedez wrote:
>
> Ok, I was not aware of this mechanism.
>
> In fact this is a boolean control to activate the input gain amplifier for
> microphone signal or to deactivate it for standard line signal.
> I use the enum to have choice value more explicit than on/off or
> true/false, for the end user.
> Also there will never be more value than those two.
>
> So I chould change the control name to "Mic/Line Input Enum" and keep the
> enum for values, more than name it "Input Gain Switch" and use boolean ?
Right.
Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state
2015-03-16 7:51 ` Takashi Iwai
@ 2015-03-16 14:54 ` Clément Guedez
2015-03-16 14:55 ` Takashi Iwai
0 siblings, 1 reply; 15+ messages in thread
From: Clément Guedez @ 2015-03-16 14:54 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
Ok, I was not aware of this mechanism.
In fact this is a boolean control to activate the input gain amplifier for
microphone signal or to deactivate it for standard line signal.
I use the enum to have choice value more explicit than on/off or
true/false, for the end user.
Also there will never be more value than those two.
So I chould change the control name to "Mic/Line Input Enum" and keep the
enum for values, more than name it "Input Gain Switch" and use boolean ?
Thanks
2015-03-16 8:51 GMT+01:00 Takashi Iwai <tiwai@suse.de>:
> At Mon, 16 Mar 2015 01:20:54 +0100,
> klem.dev@gmail.com wrote:
> >
> > From: Clément Guedez <klem.dev@gmail.com>
> >
> > Add text Line in/Mic for selecting input gain state in mixer for ESI
> W192M.
>
> What I meant is to change control name "Line Switch" to a different
> suffix (oh, anyway there is a typo in the original code, it's written
> as "switch", not "Switch"...)
>
> The type of control element is identified by a string name rule in
> some levels. When a control is named as "XXX Switch", it's taken as a
> boolean control. For enum control, we usually take "Enum" suffix so
> that alsa-lib simple mixer interface can recognize it as an enumerated
> control.
>
> (Hm, it's not mentioned in Documentation/sound/alsa/ControlNames.txt.
> An update is needed...)
>
>
> Takashi
>
> >
> > Signed-off-by: Clément Guedez <klem.dev@gmail.com>
> >
> > diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
> > index c7ffafa..a6e7afa 100644
> > --- a/sound/pci/ice1712/wtm.c
> > +++ b/sound/pci/ice1712/wtm.c
> > @@ -339,8 +339,14 @@ static int stac9460_adc_vol_put(struct snd_kcontrol
> *kcontrol,
> > /*
> > * MIC / LINE switch fonction
> > */
> > +static int stac9460_mic_sw_info(struct snd_kcontrol *kcontrol,
> > + struct snd_ctl_elem_info *uinfo)
> > +{
> > + static const char * const texts[2] = { "Line In", "Mic" };
> > +
> > + return snd_ctl_enum_info(uinfo, 1, 2, texts);
> > +}
> >
> > -#define stac9460_mic_sw_info snd_ctl_boolean_mono_info
> >
> > static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
> > struct snd_ctl_elem_value *ucontrol)
> > @@ -354,7 +360,7 @@ static int stac9460_mic_sw_get(struct snd_kcontrol
> *kcontrol,
> > val = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
> > else
> > val = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
> > - ucontrol->value.integer.value[0] = ~val>>7 & 0x1;
> > + ucontrol->value.enumerated.item[0] = (val >> 7) & 0x1;
> > return 0;
> > }
> >
> > @@ -370,7 +376,7 @@ static int stac9460_mic_sw_put(struct snd_kcontrol
> *kcontrol,
> > old = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
> > else
> > old = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
> > - new = (~ucontrol->value.integer.value[0] << 7 & 0x80) | (old &
> ~0x80);
> > + new = (ucontrol->value.enumerated.item[0] << 7 & 0x80) | (old &
> ~0x80);
> > change = (new != old);
> > if (change) {
> > if (id == 0)
> > --
> > 2.1.4
> >
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state
2015-03-16 0:20 ` [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state klem.dev
@ 2015-03-16 7:51 ` Takashi Iwai
2015-03-16 14:54 ` Clément Guedez
0 siblings, 1 reply; 15+ messages in thread
From: Takashi Iwai @ 2015-03-16 7:51 UTC (permalink / raw)
To: klem.dev; +Cc: alsa-devel
At Mon, 16 Mar 2015 01:20:54 +0100,
klem.dev@gmail.com wrote:
>
> From: Clément Guedez <klem.dev@gmail.com>
>
> Add text Line in/Mic for selecting input gain state in mixer for ESI W192M.
What I meant is to change control name "Line Switch" to a different
suffix (oh, anyway there is a typo in the original code, it's written
as "switch", not "Switch"...)
The type of control element is identified by a string name rule in
some levels. When a control is named as "XXX Switch", it's taken as a
boolean control. For enum control, we usually take "Enum" suffix so
that alsa-lib simple mixer interface can recognize it as an enumerated
control.
(Hm, it's not mentioned in Documentation/sound/alsa/ControlNames.txt.
An update is needed...)
Takashi
>
> Signed-off-by: Clément Guedez <klem.dev@gmail.com>
>
> diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
> index c7ffafa..a6e7afa 100644
> --- a/sound/pci/ice1712/wtm.c
> +++ b/sound/pci/ice1712/wtm.c
> @@ -339,8 +339,14 @@ static int stac9460_adc_vol_put(struct snd_kcontrol *kcontrol,
> /*
> * MIC / LINE switch fonction
> */
> +static int stac9460_mic_sw_info(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + static const char * const texts[2] = { "Line In", "Mic" };
> +
> + return snd_ctl_enum_info(uinfo, 1, 2, texts);
> +}
>
> -#define stac9460_mic_sw_info snd_ctl_boolean_mono_info
>
> static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol)
> @@ -354,7 +360,7 @@ static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
> val = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
> else
> val = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
> - ucontrol->value.integer.value[0] = ~val>>7 & 0x1;
> + ucontrol->value.enumerated.item[0] = (val >> 7) & 0x1;
> return 0;
> }
>
> @@ -370,7 +376,7 @@ static int stac9460_mic_sw_put(struct snd_kcontrol *kcontrol,
> old = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
> else
> old = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
> - new = (~ucontrol->value.integer.value[0] << 7 & 0x80) | (old & ~0x80);
> + new = (ucontrol->value.enumerated.item[0] << 7 & 0x80) | (old & ~0x80);
> change = (new != old);
> if (change) {
> if (id == 0)
> --
> 2.1.4
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state
[not found] <1426465255-19005-1-git-send-email-me>
@ 2015-03-16 0:20 ` klem.dev
2015-03-16 7:51 ` Takashi Iwai
0 siblings, 1 reply; 15+ messages in thread
From: klem.dev @ 2015-03-16 0:20 UTC (permalink / raw)
To: patch; +Cc: Clément Guedez, alsa-devel
From: Clément Guedez <klem.dev@gmail.com>
Add text Line in/Mic for selecting input gain state in mixer for ESI W192M.
Signed-off-by: Clément Guedez <klem.dev@gmail.com>
diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
index c7ffafa..a6e7afa 100644
--- a/sound/pci/ice1712/wtm.c
+++ b/sound/pci/ice1712/wtm.c
@@ -339,8 +339,14 @@ static int stac9460_adc_vol_put(struct snd_kcontrol *kcontrol,
/*
* MIC / LINE switch fonction
*/
+static int stac9460_mic_sw_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char * const texts[2] = { "Line In", "Mic" };
+
+ return snd_ctl_enum_info(uinfo, 1, 2, texts);
+}
-#define stac9460_mic_sw_info snd_ctl_boolean_mono_info
static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -354,7 +360,7 @@ static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
val = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
else
val = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
- ucontrol->value.integer.value[0] = ~val>>7 & 0x1;
+ ucontrol->value.enumerated.item[0] = (val >> 7) & 0x1;
return 0;
}
@@ -370,7 +376,7 @@ static int stac9460_mic_sw_put(struct snd_kcontrol *kcontrol,
old = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
else
old = stac9460_2_get(ice, STAC946X_GENERAL_PURPOSE);
- new = (~ucontrol->value.integer.value[0] << 7 & 0x80) | (old & ~0x80);
+ new = (ucontrol->value.enumerated.item[0] << 7 & 0x80) | (old & ~0x80);
change = (new != old);
if (change) {
if (id == 0)
--
2.1.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 15+ messages in thread
end of thread, other threads:[~2015-03-18 1:26 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1426300302-20542-1-git-send-email-me>
2015-03-14 2:31 ` [PATCH 2/6] ESI W192M : Update eeprom structure to C99 standard klem.dev
2015-03-14 2:31 ` [PATCH 3/6] ESI W192M : Enable midi i/o port for envy24 chip klem.dev
2015-03-14 2:31 ` [PATCH 4/6] ESI W192M : Add TLV support to control volume using dB scale klem.dev
2015-03-14 4:01 ` Clément Guedez
2015-03-14 8:11 ` Takashi Iwai
2015-03-14 2:31 ` [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state klem.dev
2015-03-14 8:10 ` Takashi Iwai
2015-03-14 13:45 ` Clément Guedez
2015-03-14 2:31 ` [PATCH 6/6] ESI W192M : Add sampling rate control of the ADC/DAC klem.dev
2015-03-14 4:02 ` Clément Guedez
[not found] <1426465255-19005-1-git-send-email-me>
2015-03-16 0:20 ` [PATCH 5/6] ESI W192M : Add text Line in/Mic for selecting input gain state klem.dev
2015-03-16 7:51 ` Takashi Iwai
2015-03-16 14:54 ` Clément Guedez
2015-03-16 14:55 ` Takashi Iwai
[not found] <1426641991-3694-1-git-send-email-me>
2015-03-18 1:26 ` klem.dev
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.