* [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
@ 2015-03-03 15:55 Gabriel Dobato
2015-03-04 6:37 ` Dmitry Lifshitz
0 siblings, 1 reply; 7+ messages in thread
From: Gabriel Dobato @ 2015-03-03 15:55 UTC (permalink / raw)
To: u-boot
Hello,
I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510
SoM(provided by Compulab) using the u-boot image provided by Compulab:
http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres
By default, it seems SD-Card is not enabled, so I think I have to
configure right the MPP option.
I have searched over and over in the code sources, I have change some
arrays defined in some files that are related to the MPP (pinmux) but
nothing happens:
./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:
* DB-88F6781-BP B0 */
#define DB_88AP510BP_B_MPP0_7 0x00000000
#define DB_88AP510BP_B_MPP8_15 0x00442000
#define DB_88AP510BP_B_MPP16_23 0x32334043 <---
#define DB_88AP510BP_B_MPP24_31 0x11111111
#define DB_88AP510BP_B_MPP32_39 0x11111111
#define DB_88AP510BP_B_MPP40_47 0x11111111 <---
#define DB_88AP510BP_B_MPP48_55 0x11111111
#define DB_88AP510BP_B_MPP56_63 0x00111111
#define DB_88AP510BP_B_OE_LOW
(~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))
#define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF
#define DB_88AP510BP_B_OE_VAL_LOW
((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))
#define DB_88AP510BP_B_OE_VAL_HIGH 0x0
./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:
MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] =
{{{{
DB_88AP510BP_B_MPP0_7,
DB_88AP510BP_B_MPP8_15,
DB_88AP510BP_B_MPP16_23,
DB_88AP510BP_B_MPP40_47 <-------
}}}};
Anyone has faced this problem before? I really appreciate some kind of help.
Best regards,
Gabriel
^ permalink raw reply [flat|nested] 7+ messages in thread* [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
2015-03-03 15:55 [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card Gabriel Dobato
@ 2015-03-04 6:37 ` Dmitry Lifshitz
2015-03-04 8:18 ` Gabriel Dobato
0 siblings, 1 reply; 7+ messages in thread
From: Dmitry Lifshitz @ 2015-03-04 6:37 UTC (permalink / raw)
To: u-boot
Hi Gabriel,
Try fixing CM-A510 related code:
mvBoardEnvSpec.h
...
...
/* CM-A510 */
#define CM_A510_MPP0_7 0x00000033
#define CM_A510_MPP8_15 0x00445050
#define CM_A510_MPP16_23 0x66664040
#define CM_A510_MPP24_31 0x11111111
#define CM_A510_MPP32_39 0x11111111
#define CM_A510_MPP40_47 0x11111111
#define CM_A510_MPP48_55 0x11111111
#define CM_A510_MPP56_63 0x00111111
...
board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c
...
...
MV_BOARD_MPP_INFO cm_a510InfoBoardMppConfigValue[]
...
Regards,
Dmitry
On 03/03/2015 05:55 PM, Gabriel Dobato wrote:
> Hello,
>
> I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510
> SoM(provided by Compulab) using the u-boot image provided by Compulab:
>
> http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres
>
> By default, it seems SD-Card is not enabled, so I think I have to
> configure right the MPP option.
>
> I have searched over and over in the code sources, I have change some
> arrays defined in some files that are related to the MPP (pinmux) but
> nothing happens:
>
> ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:
>
> * DB-88F6781-BP B0 */
> #define DB_88AP510BP_B_MPP0_7 0x00000000
> #define DB_88AP510BP_B_MPP8_15 0x00442000
> #define DB_88AP510BP_B_MPP16_23 0x32334043 <---
> #define DB_88AP510BP_B_MPP24_31 0x11111111
> #define DB_88AP510BP_B_MPP32_39 0x11111111
> #define DB_88AP510BP_B_MPP40_47 0x11111111 <---
> #define DB_88AP510BP_B_MPP48_55 0x11111111
> #define DB_88AP510BP_B_MPP56_63 0x00111111
> #define DB_88AP510BP_B_OE_LOW
> (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))
>
> #define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF
> #define DB_88AP510BP_B_OE_VAL_LOW
> ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))
>
> #define DB_88AP510BP_B_OE_VAL_HIGH 0x0
>
>
>
>
> ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:
> MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] =
> {{{{
> DB_88AP510BP_B_MPP0_7,
> DB_88AP510BP_B_MPP8_15,
> DB_88AP510BP_B_MPP16_23,
> DB_88AP510BP_B_MPP40_47 <-------
> }}}};
>
> Anyone has faced this problem before? I really appreciate some kind of
> help.
>
> Best regards,
>
> Gabriel
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread* [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
2015-03-04 6:37 ` Dmitry Lifshitz
@ 2015-03-04 8:18 ` Gabriel Dobato
2015-03-04 8:50 ` Dmitry Lifshitz
0 siblings, 1 reply; 7+ messages in thread
From: Gabriel Dobato @ 2015-03-04 8:18 UTC (permalink / raw)
To: u-boot
HI Dmitry,
Thank you very much for your answer!
I have tried it, but I get the same:
CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit
In reference to peripherals, only is available USB and Ethernet 0 by
default. I am searching in the sources just in case there is something
else... but I am afraid I will not find something.
>> #define CM_A510_MPP0_7 0x00000033
>> #define CM_A510_MPP8_15 0x00445050
>> #define CM_A510_MPP16_23 0x66664040
By the way, how do you get that resgisters? In my case, I tried to
define them as per as Marvell 88AP510 Specification reference. Is it the
right place?
Best regards,
Gabriel
On 04/03/15 07:37, Dmitry Lifshitz wrote:
> Hi Gabriel,
>
>
> Try fixing CM-A510 related code:
>
> mvBoardEnvSpec.h
>
> ...
> ...
>
> /* CM-A510 */
> #define CM_A510_MPP0_7 0x00000033
> #define CM_A510_MPP8_15 0x00445050
> #define CM_A510_MPP16_23 0x66664040
> #define CM_A510_MPP24_31 0x11111111
> #define CM_A510_MPP32_39 0x11111111
> #define CM_A510_MPP40_47 0x11111111
> #define CM_A510_MPP48_55 0x11111111
> #define CM_A510_MPP56_63 0x00111111
>
> ...
>
>
> board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c
>
> ...
> ...
> MV_BOARD_MPP_INFO cm_a510InfoBoardMppConfigValue[]
>
> ...
>
>
> Regards,
>
> Dmitry
>
>
> On 03/03/2015 05:55 PM, Gabriel Dobato wrote:
>> Hello,
>>
>> I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510
>> SoM(provided by Compulab) using the u-boot image provided by Compulab:
>>
>> http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres
>>
>> By default, it seems SD-Card is not enabled, so I think I have to
>> configure right the MPP option.
>>
>> I have searched over and over in the code sources, I have change some
>> arrays defined in some files that are related to the MPP (pinmux) but
>> nothing happens:
>>
>> ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:
>>
>> * DB-88F6781-BP B0 */
>> #define DB_88AP510BP_B_MPP0_7 0x00000000
>> #define DB_88AP510BP_B_MPP8_15 0x00442000
>> #define DB_88AP510BP_B_MPP16_23 0x32334043 <---
>> #define DB_88AP510BP_B_MPP24_31 0x11111111
>> #define DB_88AP510BP_B_MPP32_39 0x11111111
>> #define DB_88AP510BP_B_MPP40_47 0x11111111 <---
>> #define DB_88AP510BP_B_MPP48_55 0x11111111
>> #define DB_88AP510BP_B_MPP56_63 0x00111111
>> #define DB_88AP510BP_B_OE_LOW
>> (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))
>>
>>
>> #define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF
>> #define DB_88AP510BP_B_OE_VAL_LOW
>> ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))
>>
>>
>> #define DB_88AP510BP_B_OE_VAL_HIGH 0x0
>>
>>
>>
>>
>> ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:
>> MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] =
>> {{{{
>> DB_88AP510BP_B_MPP0_7,
>> DB_88AP510BP_B_MPP8_15,
>> DB_88AP510BP_B_MPP16_23,
>> DB_88AP510BP_B_MPP40_47 <-------
>> }}}};
>>
>> Anyone has faced this problem before? I really appreciate some kind of
>> help.
>>
>> Best regards,
>>
>> Gabriel
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread* [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
2015-03-04 8:18 ` Gabriel Dobato
@ 2015-03-04 8:50 ` Dmitry Lifshitz
2015-03-05 9:48 ` Gabriel Dobato
0 siblings, 1 reply; 7+ messages in thread
From: Dmitry Lifshitz @ 2015-03-04 8:50 UTC (permalink / raw)
To: u-boot
Hi Gabriel,
On 03/04/2015 10:18 AM, Gabriel Dobato wrote:
> HI Dmitry,
>
> Thank you very much for your answer!
>
> I have tried it, but I get the same:
>
> CM-A510>> mmc init
> CM-A510>> mmcinfo 0
> Device: MV_SDHCI
> Manufacturer ID: 0
> OEM: 0
> Name: Tran Speed: 0
> Rd Block Len: 0
> MMC version 0.0
> High Capacity: No
> Capacity: 0
> Bus Width: 0-bit
>
> In reference to peripherals, only is available USB and Ethernet 0 by
> default. I am searching in the sources just in case there is something
> else... but I am afraid I will not find something.
>
>>> #define CM_A510_MPP0_7 0x00000033
>>> #define CM_A510_MPP8_15 0x00445050
>>> #define CM_A510_MPP16_23 0x66664040
>
We forked from DB88AP510-A-P dev board code. Apply the patches from the
latest CM-A510 U-Boot package
(http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
to see the changes log and build instructions.
> By the way, how do you get that resgisters? In my case, I tried to
> define them as per as Marvell 88AP510 Specification reference. Is it the
> right place?
>
> Best regards,
>
> Gabriel
Regards,
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
2015-03-04 8:50 ` Dmitry Lifshitz
@ 2015-03-05 9:48 ` Gabriel Dobato
2015-03-15 12:00 ` Dmitry Lifshitz
0 siblings, 1 reply; 7+ messages in thread
From: Gabriel Dobato @ 2015-03-05 9:48 UTC (permalink / raw)
To: u-boot
Hi Dmitry,
Finally, I got the SD Card as a bootable kernel space. However I had to
set the registers as below:
>>>> #define CM_A510_MPP0_7 0x00000033 (does not
matter)
>>>> #define CM_A510_MPP8_15 0x00445050 (does not
matter)
>>>> #define CM_A510_MPP16_23 0x33333333 <----
(SDIO0 and SDIO1)
Regards,
Gabriel
On 04/03/15 09:50, Dmitry Lifshitz wrote:
> Hi Gabriel,
>
> On 03/04/2015 10:18 AM, Gabriel Dobato wrote:
>> HI Dmitry,
>>
>> Thank you very much for your answer!
>>
>> I have tried it, but I get the same:
>>
>> CM-A510>> mmc init
>> CM-A510>> mmcinfo 0
>> Device: MV_SDHCI
>> Manufacturer ID: 0
>> OEM: 0
>> Name: Tran Speed: 0
>> Rd Block Len: 0
>> MMC version 0.0
>> High Capacity: No
>> Capacity: 0
>> Bus Width: 0-bit
>>
>> In reference to peripherals, only is available USB and Ethernet 0 by
>> default. I am searching in the sources just in case there is something
>> else... but I am afraid I will not find something.
>>
>>>> #define CM_A510_MPP0_7 0x00000033
>>>> #define CM_A510_MPP8_15 0x00445050
>>>> #define CM_A510_MPP16_23 0x66664040
>>
>
> We forked from DB88AP510-A-P dev board code. Apply the patches from the
> latest CM-A510 U-Boot package
> (http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
> to see the changes log and build instructions.
>
>> By the way, how do you get that resgisters? In my case, I tried to
>> define them as per as Marvell 88AP510 Specification reference. Is it the
>> right place?
>>
>> Best regards,
>>
>> Gabriel
>
>
> Regards,
>
> Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
2015-03-05 9:48 ` Gabriel Dobato
@ 2015-03-15 12:00 ` Dmitry Lifshitz
0 siblings, 0 replies; 7+ messages in thread
From: Dmitry Lifshitz @ 2015-03-15 12:00 UTC (permalink / raw)
To: u-boot
Hi Gabriel,
Sorry for the late reply.
I see you made a progress with that issue.
Thank you for sharing the results.
Best regards,
Dmitry
On 03/05/2015 11:48 AM, Gabriel Dobato wrote:
> Hi Dmitry,
>
> Finally, I got the SD Card as a bootable kernel space. However I had to
> set the registers as below:
>
> >>>> #define CM_A510_MPP0_7 0x00000033 (does not
> matter)
> >>>> #define CM_A510_MPP8_15 0x00445050 (does not
> matter)
> >>>> #define CM_A510_MPP16_23 0x33333333 <----
> (SDIO0 and SDIO1)
>
>
> Regards,
>
> Gabriel
>
>
>
> On 04/03/15 09:50, Dmitry Lifshitz wrote:
>> Hi Gabriel,
>>
>> On 03/04/2015 10:18 AM, Gabriel Dobato wrote:
>>> HI Dmitry,
>>>
>>> Thank you very much for your answer!
>>>
>>> I have tried it, but I get the same:
>>>
>>> CM-A510>> mmc init
>>> CM-A510>> mmcinfo 0
>>> Device: MV_SDHCI
>>> Manufacturer ID: 0
>>> OEM: 0
>>> Name: Tran Speed: 0
>>> Rd Block Len: 0
>>> MMC version 0.0
>>> High Capacity: No
>>> Capacity: 0
>>> Bus Width: 0-bit
>>>
>>> In reference to peripherals, only is available USB and Ethernet 0 by
>>> default. I am searching in the sources just in case there is something
>>> else... but I am afraid I will not find something.
>>>
>>>>> #define CM_A510_MPP0_7 0x00000033
>>>>> #define CM_A510_MPP8_15 0x00445050
>>>>> #define CM_A510_MPP16_23 0x66664040
>>>
>>
>> We forked from DB88AP510-A-P dev board code. Apply the patches from the
>> latest CM-A510 U-Boot package
>> (http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
>> to see the changes log and build instructions.
>>
>>> By the way, how do you get that resgisters? In my case, I tried to
>>> define them as per as Marvell 88AP510 Specification reference. Is it the
>>> right place?
>>>
>>> Best regards,
>>>
>>> Gabriel
>>
>>
>> Regards,
>>
>> Dmitry
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
@ 2015-06-16 16:23 Gandha Naringrekar
0 siblings, 0 replies; 7+ messages in thread
From: Gandha Naringrekar @ 2015-06-16 16:23 UTC (permalink / raw)
To: u-boot
WHAT IS MINIMUM BATCH SIZE USING COMPULAB 48" COATING PAN WITH BD OF TABLETS IS 0.69
Gandha Naringrekar
Sr. Manager, R&D
Aurobindo Pharma USA
6 Wheeling Road
Dayton, NJ 08810
Phone: 732-230-8229
Cell :732-310-5515
gnaringrekar at aurobindousa.com<mailto:gnaringrekar@aurobindousa.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-06-16 16:23 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-03 15:55 [U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card Gabriel Dobato
2015-03-04 6:37 ` Dmitry Lifshitz
2015-03-04 8:18 ` Gabriel Dobato
2015-03-04 8:50 ` Dmitry Lifshitz
2015-03-05 9:48 ` Gabriel Dobato
2015-03-15 12:00 ` Dmitry Lifshitz
2015-06-16 16:23 Gandha Naringrekar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.