From: "Li, Aubrey" <aubrey.li@linux.intel.com>
To: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>,
LKML <linux-kernel@vger.kernel.org>, LKP ML <lkp@01.org>
Subject: Re: [LKP] [x86/platform, acpi] 7486341a98f: genirq: Flags mismatch irq 8. 00000080 (mmc0) vs. 00000000 (rtc0)
Date: Tue, 24 Mar 2015 10:16:25 +0800 [thread overview]
Message-ID: <5510C8F9.5090503@linux.intel.com> (raw)
In-Reply-To: <1427158405.17170.3.camel@intel.com>
On 2015/3/24 8:53, Huang Ying wrote:
> On Mon, 2015-03-23 at 14:18 +0800, Li, Aubrey wrote:
>> On 2015/3/20 16:38, Huang Ying wrote:
>>> FYI, we noticed the below changes on
>>>
>>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>>> commit 7486341a98f26857f383aec88ffa10950087c3a1 ("x86/platform, acpi: Bypass legacy PIC and PIT in ACPI hardware reduced mode")
>>>
>>>
>>> +-----------------+------------+------------+
>>> | | 394838c960 | 7486341a98 |
>>> +-----------------+------------+------------+
>>> | boot_successes | 10 | 10 |
>>> | early-boot-hang | 1 | 1 |
>>> +-----------------+------------+------------+
>>>
>>>
>>> [ 28.682462] microcode: CPU3 sig=0x30673, pf=0x2, revision=0x31e
>>> [ 28.692739] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>>> [ 28.739947] mmc0: Reset 0x1 never completed.
>>> [ 28.745155] genirq: Flags mismatch irq 8. 00000080 (mmc0) vs. 00000000 (rtc0)
>>
>> mmc driver requests IRQ 8?
>> From surface it looks like either a firmware issue or ACPI get the wrong
>> IRQ resource.
>> I failed to replicate this issue with the attached config file on my
>> side, which platform is the test running?
>
> Sorry for late. The test was running on an ASUS T100TA.
I'm running on ASUS T100TA as well, is this replicable every time on
your side? can you please send out the acpi table on your machine?
Thanks,
-Aubrey
>
> Best Regards,
> Huang, Ying
>
>> Thanks,
>> -Aubrey
>>> [ 28.753151] CPU: 1 PID: 138 Comm: systemd-udevd Not tainted 4.0.0-rc4-wl-03426-gdba586f #1
>>> [ 28.753156] ffff880076683480 ffff8800764ffa78 ffffffff818b2eb3 0000000000000007
>>> [ 28.753159] ffff88006d006800 ffff8800764ffad8 ffffffff810d37af ffff8800764ffad8
>>> [ 28.753162] 0000000000000246 ffffffff810d394a ffff880053bdc400 0000000000000000
>>> [ 28.753163] Call Trace:
>>> [ 28.753174] [<ffffffff818b2eb3>] dump_stack+0x4c/0x65
>>> [ 28.753180] [<ffffffff810d37af>] __setup_irq+0x57f/0x5d0
>>> [ 28.753183] [<ffffffff810d394a>] ? request_threaded_irq+0xaa/0x1b0
>>> [ 28.753191] [<ffffffffa006ddc0>] ? sdhci_request+0x200/0x200 [sdhci]
>>> [ 28.753194] [<ffffffff810d3994>] request_threaded_irq+0xf4/0x1b0
>>> [ 28.753199] [<ffffffffa006b790>] sdhci_add_host+0x800/0xf90 [sdhci]
>>> [ 28.753205] [<ffffffffa00295a8>] sdhci_acpi_probe+0x348/0x440 [sdhci_acpi]
>>> [ 28.753210] [<ffffffff81558ab4>] platform_drv_probe+0x34/0xa0
>>> [ 28.753215] [<ffffffff815567f0>] driver_probe_device+0x90/0x3e0
>>> [ 28.753218] [<ffffffff81556c1b>] __driver_attach+0x9b/0xa0
>>> [ 28.753221] [<ffffffff81556b80>] ? __device_attach+0x40/0x40
>>> [ 28.753231] [<ffffffff815545cb>] bus_for_each_dev+0x6b/0xb0
>>> [ 28.753234] [<ffffffff8155626e>] driver_attach+0x1e/0x20
>>> [ 28.753237] [<ffffffff81555e30>] bus_add_driver+0x180/0x250
>>> [ 28.753240] [<ffffffffa002e000>] ? 0xffffffffa002e000
>>> [ 28.753243] [<ffffffff81557424>] driver_register+0x64/0xf0
>>> [ 28.753246] [<ffffffff815589fa>] __platform_driver_register+0x4a/0x50
>>> [ 28.753250] [<ffffffffa002e017>] sdhci_acpi_driver_init+0x17/0x1000 [sdhci_acpi]
>>> [ 28.753254] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
>>> [ 28.753259] [<ffffffff811cb86c>] ? kmem_cache_alloc_trace+0x1cc/0x240
>>> [ 28.753262] [<ffffffff818afb3c>] ? do_init_module+0x28/0x1dd
>>> [ 28.753266] [<ffffffff818afb75>] do_init_module+0x61/0x1dd
>>> [ 28.753270] [<ffffffff810fe9af>] load_module+0x189f/0x1be0
>>> [ 28.753274] [<ffffffff810f9e50>] ? store_uevent+0x40/0x40
>>> [ 28.753279] [<ffffffff810fee96>] SyS_finit_module+0x86/0xb0
>>> [ 28.753283] [<ffffffff818bb109>] system_call_fastpath+0x12/0x17
>>> [ 28.753700] mmc0: Failed to request IRQ 8: -16
>>> [ 28.975382] IOAPIC[0]: Set routing entry (8-16 -> 0x32 -> IRQ 13 Mode:1 Active:1 Dest:15)
>>> [ 28.975934] sdhci-acpi: probe of INT33BB:00 failed with error -16
>>>
>>>
>>> Thanks,
>>> Ying Huang
>>>
>>>
>>>
>>> _______________________________________________
>>> LKP mailing list
>>> LKP@linux.intel.com
>>>
>>
>
>
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Li, Aubrey <aubrey.li@linux.intel.com>
To: lkp@lists.01.org
Subject: Re: [x86/platform, acpi] 7486341a98f: genirq: Flags mismatch irq 8. 00000080 (mmc0) vs. 00000000 (rtc0)
Date: Tue, 24 Mar 2015 10:16:25 +0800 [thread overview]
Message-ID: <5510C8F9.5090503@linux.intel.com> (raw)
In-Reply-To: <1427158405.17170.3.camel@intel.com>
[-- Attachment #1: Type: text/plain, Size: 4249 bytes --]
On 2015/3/24 8:53, Huang Ying wrote:
> On Mon, 2015-03-23 at 14:18 +0800, Li, Aubrey wrote:
>> On 2015/3/20 16:38, Huang Ying wrote:
>>> FYI, we noticed the below changes on
>>>
>>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>>> commit 7486341a98f26857f383aec88ffa10950087c3a1 ("x86/platform, acpi: Bypass legacy PIC and PIT in ACPI hardware reduced mode")
>>>
>>>
>>> +-----------------+------------+------------+
>>> | | 394838c960 | 7486341a98 |
>>> +-----------------+------------+------------+
>>> | boot_successes | 10 | 10 |
>>> | early-boot-hang | 1 | 1 |
>>> +-----------------+------------+------------+
>>>
>>>
>>> [ 28.682462] microcode: CPU3 sig=0x30673, pf=0x2, revision=0x31e
>>> [ 28.692739] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>>> [ 28.739947] mmc0: Reset 0x1 never completed.
>>> [ 28.745155] genirq: Flags mismatch irq 8. 00000080 (mmc0) vs. 00000000 (rtc0)
>>
>> mmc driver requests IRQ 8?
>> From surface it looks like either a firmware issue or ACPI get the wrong
>> IRQ resource.
>> I failed to replicate this issue with the attached config file on my
>> side, which platform is the test running?
>
> Sorry for late. The test was running on an ASUS T100TA.
I'm running on ASUS T100TA as well, is this replicable every time on
your side? can you please send out the acpi table on your machine?
Thanks,
-Aubrey
>
> Best Regards,
> Huang, Ying
>
>> Thanks,
>> -Aubrey
>>> [ 28.753151] CPU: 1 PID: 138 Comm: systemd-udevd Not tainted 4.0.0-rc4-wl-03426-gdba586f #1
>>> [ 28.753156] ffff880076683480 ffff8800764ffa78 ffffffff818b2eb3 0000000000000007
>>> [ 28.753159] ffff88006d006800 ffff8800764ffad8 ffffffff810d37af ffff8800764ffad8
>>> [ 28.753162] 0000000000000246 ffffffff810d394a ffff880053bdc400 0000000000000000
>>> [ 28.753163] Call Trace:
>>> [ 28.753174] [<ffffffff818b2eb3>] dump_stack+0x4c/0x65
>>> [ 28.753180] [<ffffffff810d37af>] __setup_irq+0x57f/0x5d0
>>> [ 28.753183] [<ffffffff810d394a>] ? request_threaded_irq+0xaa/0x1b0
>>> [ 28.753191] [<ffffffffa006ddc0>] ? sdhci_request+0x200/0x200 [sdhci]
>>> [ 28.753194] [<ffffffff810d3994>] request_threaded_irq+0xf4/0x1b0
>>> [ 28.753199] [<ffffffffa006b790>] sdhci_add_host+0x800/0xf90 [sdhci]
>>> [ 28.753205] [<ffffffffa00295a8>] sdhci_acpi_probe+0x348/0x440 [sdhci_acpi]
>>> [ 28.753210] [<ffffffff81558ab4>] platform_drv_probe+0x34/0xa0
>>> [ 28.753215] [<ffffffff815567f0>] driver_probe_device+0x90/0x3e0
>>> [ 28.753218] [<ffffffff81556c1b>] __driver_attach+0x9b/0xa0
>>> [ 28.753221] [<ffffffff81556b80>] ? __device_attach+0x40/0x40
>>> [ 28.753231] [<ffffffff815545cb>] bus_for_each_dev+0x6b/0xb0
>>> [ 28.753234] [<ffffffff8155626e>] driver_attach+0x1e/0x20
>>> [ 28.753237] [<ffffffff81555e30>] bus_add_driver+0x180/0x250
>>> [ 28.753240] [<ffffffffa002e000>] ? 0xffffffffa002e000
>>> [ 28.753243] [<ffffffff81557424>] driver_register+0x64/0xf0
>>> [ 28.753246] [<ffffffff815589fa>] __platform_driver_register+0x4a/0x50
>>> [ 28.753250] [<ffffffffa002e017>] sdhci_acpi_driver_init+0x17/0x1000 [sdhci_acpi]
>>> [ 28.753254] [<ffffffff81002130>] do_one_initcall+0xc0/0x1f0
>>> [ 28.753259] [<ffffffff811cb86c>] ? kmem_cache_alloc_trace+0x1cc/0x240
>>> [ 28.753262] [<ffffffff818afb3c>] ? do_init_module+0x28/0x1dd
>>> [ 28.753266] [<ffffffff818afb75>] do_init_module+0x61/0x1dd
>>> [ 28.753270] [<ffffffff810fe9af>] load_module+0x189f/0x1be0
>>> [ 28.753274] [<ffffffff810f9e50>] ? store_uevent+0x40/0x40
>>> [ 28.753279] [<ffffffff810fee96>] SyS_finit_module+0x86/0xb0
>>> [ 28.753283] [<ffffffff818bb109>] system_call_fastpath+0x12/0x17
>>> [ 28.753700] mmc0: Failed to request IRQ 8: -16
>>> [ 28.975382] IOAPIC[0]: Set routing entry (8-16 -> 0x32 -> IRQ 13 Mode:1 Active:1 Dest:15)
>>> [ 28.975934] sdhci-acpi: probe of INT33BB:00 failed with error -16
>>>
>>>
>>> Thanks,
>>> Ying Huang
>>>
>>>
>>>
>>> _______________________________________________
>>> LKP mailing list
>>> LKP(a)linux.intel.com
>>>
>>
>
>
>
>
next prev parent reply other threads:[~2015-03-24 2:16 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-20 8:38 [LKP] [x86/platform, acpi] 7486341a98f: genirq: Flags mismatch irq 8. 00000080 (mmc0) vs. 00000000 (rtc0) Huang Ying
2015-03-20 8:38 ` Huang Ying
2015-03-23 6:18 ` [LKP] " Li, Aubrey
2015-03-23 6:18 ` Li, Aubrey
2015-03-24 0:53 ` [LKP] " Huang Ying
2015-03-24 0:53 ` Huang Ying
2015-03-24 2:16 ` Li, Aubrey [this message]
2015-03-24 2:16 ` Li, Aubrey
2015-03-24 5:34 ` [LKP] " Li, Aubrey
2015-03-24 5:34 ` Li, Aubrey
2015-03-25 7:22 ` [LKP] " Huang Ying
2015-03-25 7:22 ` Huang Ying
2015-03-26 12:13 ` [LKP] " Li, Aubrey
2015-03-26 12:13 ` Li, Aubrey
2015-03-30 8:28 ` [LKP] " Li, Aubrey
2015-03-30 8:28 ` Li, Aubrey
2015-03-30 8:37 ` [LKP] " Jiang Liu
2015-03-30 8:37 ` Jiang Liu
2015-03-30 12:19 ` [LKP] " Li, Aubrey
2015-03-30 12:19 ` Li, Aubrey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5510C8F9.5090503@linux.intel.com \
--to=aubrey.li@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lkp@01.org \
--cc=mingo@kernel.org \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.