[PATCH 0/1] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[PATCH 0/1] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[Hans de Goede]

Hi Maxime,

The driver for the chipone icn8318 touchscreen found on the Utoo P66 tablet
has been queued up by Dmitry for merging into 4.1 :

https://git.kernel.org/cgit/linux/kernel/git/dtor/input.git/commit/drivers/input?h=next&id=a93ad65d37

Can you please add this patch to your dts tree for 4.1 ?

Thanks & Regards,

Hans

[PATCH 0/1] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[Hans de Goede]

Hi Maxime,

The driver for the chipone icn8318 touchscreen found on the Utoo P66 tablet
has been queued up by Dmitry for merging into 4.1 :

https://git.kernel.org/cgit/linux/kernel/git/dtor/input.git/commit/drivers/input?h=next&id=a93ad65d37

Can you please add this patch to your dts tree for 4.1 ?

Thanks & Regards,

Hans

[PATCH] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[Hans de Goede]

Add a node for the chipone-icn8318 touchscreen found on the Utoo P66 tablet.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 0f0a411..d1d4d30 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -50,6 +50,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
@@ -93,6 +94,20 @@
 	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
+	chipone_icn8318@40 {
+		compatible = "chipone,icn8318";
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_wake_pin_p66>;
+		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+
 	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
@@ -152,6 +167,13 @@
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
+	ts_wake_pin_p66: ts_wake_pin@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb0_vbus_pin_a: usb0_vbus_pin@0 {
 		allwinner,pins = "PB4";
 		allwinner,function = "gpio_out";
-- 
2.3.4

[PATCH] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[Hans de Goede]

Add a node for the chipone-icn8318 touchscreen found on the Utoo P66 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 0f0a411..d1d4d30 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -50,6 +50,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
@@ -93,6 +94,20 @@
 	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
+	chipone_icn8318 at 40 {
+		compatible = "chipone,icn8318";
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_wake_pin_p66>;
+		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+
 	pcf8563: rtc at 51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
@@ -152,6 +167,13 @@
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
+	ts_wake_pin_p66: ts_wake_pin at 0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb0_vbus_pin_a: usb0_vbus_pin at 0 {
 		allwinner,pins = "PB4";
 		allwinner,function = "gpio_out";
-- 
2.3.4

Re: [PATCH] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1508 bytes --]

Hi Hans,

On Sun, Mar 29, 2015 at 08:13:51PM +0200, Hans de Goede wrote:
> Add a node for the chipone-icn8318 touchscreen found on the Utoo P66 tablet.
> 
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
>  arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
> index 0f0a411..d1d4d30 100644
> --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
> +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
> @@ -50,6 +50,7 @@
>  #include "sunxi-common-regulators.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>  
>  / {
> @@ -93,6 +94,20 @@
>  	pinctrl-0 = <&i2c1_pins_a>;
>  	status = "okay";
>  
> +	chipone_icn8318@40 {

The node name should be the class of the device, something like
touchscreen@40 in this case.

> +		compatible = "chipone,icn8318";
> +		reg = <0x40>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */

Shouldn't you reference this pin in the pinctrl node too?

If this patch is resent soon enough, I'll merge it and send it through
a late pull request together with the A23 SMP and A31 cpufreq patches.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[Maxime Ripard]

Hi Hans,

On Sun, Mar 29, 2015 at 08:13:51PM +0200, Hans de Goede wrote:
> Add a node for the chipone-icn8318 touchscreen found on the Utoo P66 tablet.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
> index 0f0a411..d1d4d30 100644
> --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
> +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
> @@ -50,6 +50,7 @@
>  #include "sunxi-common-regulators.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>  
>  / {
> @@ -93,6 +94,20 @@
>  	pinctrl-0 = <&i2c1_pins_a>;
>  	status = "okay";
>  
> +	chipone_icn8318 at 40 {

The node name should be the class of the device, something like
touchscreen at 40 in this case.

> +		compatible = "chipone,icn8318";
> +		reg = <0x40>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */

Shouldn't you reference this pin in the pinctrl node too?

If this patch is resent soon enough, I'll merge it and send it through
a late pull request together with the A23 SMP and A31 cpufreq patches.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150330/2466e79c/attachment.sig>

Re: Re: [PATCH] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[Hans de Goede]

Hi,

On 31-03-15 00:52, Maxime Ripard wrote:
> Hi Hans,
>
> On Sun, Mar 29, 2015 at 08:13:51PM +0200, Hans de Goede wrote:
>> Add a node for the chipone-icn8318 touchscreen found on the Utoo P66 tablet.
>>
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>>   arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 22 ++++++++++++++++++++++
>>   1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
>> index 0f0a411..d1d4d30 100644
>> --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
>> +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
>> @@ -50,6 +50,7 @@
>>   #include "sunxi-common-regulators.dtsi"
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>>   #include <dt-bindings/pinctrl/sun4i-a10.h>
>>
>>   / {
>> @@ -93,6 +94,20 @@
>>   	pinctrl-0 = <&i2c1_pins_a>;
>>   	status = "okay";
>>
>> +	chipone_icn8318@40 {
>
> The node name should be the class of the device, something like
> touchscreen@40 in this case.

Ok I'll do a v2 fixing this.

>> +		compatible = "chipone,icn8318";
>> +		reg = <0x40>;
>> +		interrupt-parent = <&pio>;
>> +		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
>
> Shouldn't you reference this pin in the pinctrl node too?

That is not necessary when specifying a gpio interrupt through the
irq chip (rather then through a gpios property), the mux is automatically
set to irq by the kernel when requesting the irq.

Also note that we must use the interrupts notation here as this is specified
by the i2c client bindings. None of the other boards using i2c + oob irq
pins specifies a pinmux for the irq pin either.

Regards,

Hans

[linux-sunxi] Re: [PATCH] ARM: dts: sun5i: Enable touchscreen on Utoo P66

[Hans de Goede]

Hi,

On 31-03-15 00:52, Maxime Ripard wrote:
> Hi Hans,
>
> On Sun, Mar 29, 2015 at 08:13:51PM +0200, Hans de Goede wrote:
>> Add a node for the chipone-icn8318 touchscreen found on the Utoo P66 tablet.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 22 ++++++++++++++++++++++
>>   1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
>> index 0f0a411..d1d4d30 100644
>> --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
>> +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
>> @@ -50,6 +50,7 @@
>>   #include "sunxi-common-regulators.dtsi"
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>>   #include <dt-bindings/pinctrl/sun4i-a10.h>
>>
>>   / {
>> @@ -93,6 +94,20 @@
>>   	pinctrl-0 = <&i2c1_pins_a>;
>>   	status = "okay";
>>
>> +	chipone_icn8318 at 40 {
>
> The node name should be the class of the device, something like
> touchscreen at 40 in this case.

Ok I'll do a v2 fixing this.

>> +		compatible = "chipone,icn8318";
>> +		reg = <0x40>;
>> +		interrupt-parent = <&pio>;
>> +		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
>
> Shouldn't you reference this pin in the pinctrl node too?

That is not necessary when specifying a gpio interrupt through the
irq chip (rather then through a gpios property), the mux is automatically
set to irq by the kernel when requesting the irq.

Also note that we must use the interrupts notation here as this is specified
by the i2c client bindings. None of the other boards using i2c + oob irq
pins specifies a pinmux for the irq pin either.

Regards,

Hans