* 4.1-rc4 display-port on radeon not working
@ 2015-05-19 22:03 Malte Schröder
2015-05-20 15:37 ` Alex Deucher
0 siblings, 1 reply; 7+ messages in thread
From: Malte Schröder @ 2015-05-19 22:03 UTC (permalink / raw)
To: dri-devel, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 6188 bytes --]
Hi,
with 4.1-rc display-port on my Tahiti XT stopped working. I used the
firmware from http://people.freedesktop.org/~agd5f/radeon_ucode/ as of
today.
Note: the display is an Asus PB278, it used to have problems with
display port negotiation, but those disappeared like a year ago.
% grep radeon /tmp/dmesg.txt
[ 2.520294] [drm] radeon kernel modesetting enabled.
[ 2.520328] fb: switching to radeondrmfb from simple
[ 2.520727] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 -
0x00000000BFFFFFFF (3072M used)
[ 2.520729] radeon 0000:01:00.0: GTT: 1024M 0x00000000C0000000 -
0x00000000FFFFFFFF
[ 2.520830] [drm] radeon: 3072M of VRAM memory ready
[ 2.520831] [drm] radeon: 1024M of GTT memory ready.
[ 2.534959] [drm] radeon: dpm initialized
[ 2.542742] radeon 0000:01:00.0: WB enabled
[ 2.542745] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x00000000c0000c00 and cpu addr 0xffff880803febc00
[ 2.542746] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr
0x00000000c0000c04 and cpu addr 0xffff880803febc04
[ 2.542747] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr
0x00000000c0000c08 and cpu addr 0xffff880803febc08
[ 2.542748] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x00000000c0000c0c and cpu addr 0xffff880803febc0c
[ 2.542749] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr
0x00000000c0000c10 and cpu addr 0xffff880803febc10
[ 2.543159] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x0000000000075a18 and cpu addr 0xffffc90000435a18
[ 2.543162] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.543178] radeon 0000:01:00.0: radeon: using MSI.
[ 2.543192] [drm] radeon: irq initialized.
[ 3.567418] fbcon: radeondrmfb (fb0) is primary device
[ 3.573492] [drm:radeon_dp_link_train [radeon]] *ERROR* displayport
link status failed
[ 3.573504] [drm:radeon_dp_link_train [radeon]] *ERROR* clock
recovery failed
[ 3.575533] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.575534] radeon 0000:01:00.0: registered panic notifier
[ 3.582468] [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0
on minor 0
lspci -vvv:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X] (prog-if 00 [VGA
controller])
Subsystem: XFX Pine Group Inc. Double D HD 7970
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at e0000000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at e0040000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1,
Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-,
LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-,
LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance-
SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+,
LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000feeff00c Data: 41c2
Capabilities: [100 v1] Vendor Specific Information: ID=0001
Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
Capabilities: [270 v1] #19
Capabilities: [2b0 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [2c0 v1] #13
Capabilities: [2d0 v1] #1b
Kernel driver in use: radeon
--
Gruß
Malte Schröder
---------------------------------------------------------------------
MalteSch@gmx.de
[-- Attachment #1.2: dmesg.txt --]
[-- Type: text/plain, Size: 72888 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.0-rc4-highlander-00006-g2788b57 (root@highlander) (gcc version 5.1.1 20150507 (Debian 5.1.1-5) ) #1 SMP PREEMPT Tue May 19 22:51:12 CEST 2015
[ 0.000000] Command line: initrd=\25670cf3ef015c3b6b55f39200000773\4.1.0-rc4-highlander-00006-g2788b57\initrd root=LABEL=ROOT ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b77e7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b77e8000-0x00000000b77eefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b77ef000-0x00000000b8409fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b840a000-0x00000000b8918fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8919000-0x00000000cce87fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cce88000-0x00000000cd08dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd08e000-0x00000000cd0cafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd0cb000-0x00000000cd176fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd177000-0x00000000cdffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xb59c2018-0xb59d2057] usable ==> usable
[ 0.000000] e820: update [mem 0xb59b5018-0xb59c1257] usable ==> usable
[ 0.000000] e820: update [mem 0xb59a4018-0xb59b4057] usable ==> usable
[ 0.000000] e820: update [mem 0xb599b018-0xb59a3057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b599b017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b599b018-0x00000000b59a3057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b59a3058-0x00000000b59a4017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b59a4018-0x00000000b59b4057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b59b4058-0x00000000b59b5017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b59b5018-0x00000000b59c1257] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b59c1258-0x00000000b59c2017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b59c2018-0x00000000b59d2057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b59d2058-0x00000000b77e7fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b77e8000-0x00000000b77eefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b77ef000-0x00000000b8409fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b840a000-0x00000000b8918fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000b8919000-0x00000000cce87fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cce88000-0x00000000cd08dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cd08e000-0x00000000cd0cafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cd0cb000-0x00000000cd176fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cd177000-0x00000000cdffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000082effffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xcd153000 ACPI 2.0=0xcd153000 SMBIOS=0xf04c0 MPS=0xfd4f0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z87 Extreme4, BIOS P3.00 07/10/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x82f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DBFFF write-protect
[ 0.000000] DC000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0820000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0828000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 082C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 082E000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 7 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 32GB, type WB
[ 0.000000] reg 1, base: 32GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 33280MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 33408MB, range: 64MB, type WB
[ 0.000000] reg 4, base: 33472MB, range: 32MB, type WB
[ 0.000000] reg 5, base: 33504MB, range: 16MB, type WB
[ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 7, base: 3328MB, range: 256MB, type UC
[ 0.000000] total RAM covered: 32752M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 9 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 16GB, type WB
[ 0.000000] reg 6, base: 32GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 33280MB, range: 256MB, type WB
[ 0.000000] reg 8, base: 33520MB, range: 16MB, type UC
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a2e000, 0x01a2efff] PGTABLE
[ 0.000000] BRK [0x01a2f000, 0x01a2ffff] PGTABLE
[ 0.000000] BRK [0x01a30000, 0x01a30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x82ee00000-0x82effffff]
[ 0.000000] [mem 0x82ee00000-0x82effffff] page 2M
[ 0.000000] BRK [0x01a31000, 0x01a31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x820000000-0x82edfffff]
[ 0.000000] [mem 0x820000000-0x82edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x800000000-0x81fffffff]
[ 0.000000] [mem 0x800000000-0x81fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb77e7fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb75fffff] page 2M
[ 0.000000] [mem 0xb7600000-0xb77e7fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb77ef000-0xb8409fff]
[ 0.000000] [mem 0xb77ef000-0xb77fffff] page 4k
[ 0.000000] [mem 0xb7800000-0xb83fffff] page 2M
[ 0.000000] [mem 0xb8400000-0xb8409fff] page 4k
[ 0.000000] BRK [0x01a32000, 0x01a32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb8919000-0xcce87fff]
[ 0.000000] [mem 0xb8919000-0xb89fffff] page 4k
[ 0.000000] [mem 0xb8a00000-0xccdfffff] page 2M
[ 0.000000] [mem 0xcce00000-0xcce87fff] page 4k
[ 0.000000] BRK [0x01a33000, 0x01a33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcd08e000-0xcd0cafff]
[ 0.000000] [mem 0xcd08e000-0xcd0cafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcdfff000-0xcdffffff]
[ 0.000000] [mem 0xcdfff000-0xcdffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7f803000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CD153000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CD153088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CD15DC00 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CD1531A8 00AA57 (v02 ALASKA A M I 00000300 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CD175080 000040
[ 0.000000] ACPI: APIC 0x00000000CD15DD10 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CD15DDA8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000CD15DDF0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000CD15DE98 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CD15E3D8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CD15EEB0 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CD15F078 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CD15F0B8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CD15F0F0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CD15F460 003493 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: AAFT 0x00000000CD1628F8 000235 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: BGRT 0x00000000CD162B30 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080e600000-ffff88082e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000082effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b77e7fff]
[ 0.000000] node 0: [mem 0x00000000b77ef000-0x00000000b8409fff]
[ 0.000000] node 0: [mem 0x00000000b8919000-0x00000000cce87fff]
[ 0.000000] node 0: [mem 0x00000000cd08e000-0x00000000cd0cafff]
[ 0.000000] node 0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000082effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000082effffff]
[ 0.000000] On node 0 totalpages: 8370509
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 40 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13031 pages used for memmap
[ 0.000000] DMA32 zone: 833968 pages, LIFO batch:31
[ 0.000000] Normal zone: 117696 pages used for memmap
[ 0.000000] Normal zone: 7532544 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb599b000-0xb599bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb59a3000-0xb59a3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb59a4000-0xb59a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb59b4000-0xb59b4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb59b5000-0xb59b5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb59c1000-0xb59c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb59c2000-0xb59c2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb59d2000-0xb59d2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb77e8000-0xb77eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb840a000-0xb8918fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcce88000-0xcd08dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd0cb000-0xcd176fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd177000-0xcdffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xce000000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88082ec00000 s88408 r8192 d30376 u262144
[ 0.000000] pcpu-alloc: s88408 r8192 d30376 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8239678
[ 0.000000] Kernel command line: initrd=\25670cf3ef015c3b6b55f39200000773\4.1.0-rc4-highlander-00006-g2788b57\initrd root=LABEL=ROOT ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 32604924K/33482036K available (5819K kernel code, 503K rwdata, 1884K rodata, 856K init, 836K bss, 877112K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3500.224 MHz processor
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.44 BogoMIPS (lpj=3500224)
[ 0.000017] pid_max: default: 32768 minimum: 301
[ 0.000020] ACPI: Core revision 20150410
[ 0.005629] ACPI: All ACPI Tables successfully acquired
[ 0.028826] Security Framework initialized
[ 0.028829] AppArmor: AppArmor disabled by boot time parameter
[ 0.028835] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.028836] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.029019] Initializing cgroup subsys blkio
[ 0.029021] Initializing cgroup subsys devices
[ 0.029022] Initializing cgroup subsys freezer
[ 0.029023] Initializing cgroup subsys net_cls
[ 0.029024] Initializing cgroup subsys bfqio
[ 0.029025] Initializing cgroup subsys perf_event
[ 0.029027] Initializing cgroup subsys net_prio
[ 0.029041] CPU: Physical Processor ID: 0
[ 0.029042] CPU: Processor Core ID: 0
[ 0.029764] mce: CPU supports 9 MCE banks
[ 0.029773] CPU0: Thermal monitoring enabled (TM1)
[ 0.029786] process: using mwait in idle threads
[ 0.029788] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.029789] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.029876] Freeing SMP alternatives memory: 24K (ffffffff81955000 - ffffffff8195b000)
[ 0.033590] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.034019] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.044038] TSC deadline timer enabled
[ 0.044040] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
[ 0.044050] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.044063] ... version: 3
[ 0.044063] ... bit width: 48
[ 0.044064] ... generic registers: 4
[ 0.044064] ... value mask: 0000ffffffffffff
[ 0.044065] ... max period: 0000ffffffffffff
[ 0.044065] ... fixed-purpose events: 3
[ 0.044066] ... event mask: 000000070000000f
[ 0.050118] x86: Booting SMP configuration:
[ 0.050119] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.159859] x86: Booted up 1 node, 8 CPUs
[ 0.159861] smpboot: Total of 8 processors activated (56003.58 BogoMIPS)
[ 0.165501] devtmpfs: initialized
[ 0.165604] PM: Registering ACPI NVS region [mem 0xb77e8000-0xb77eefff] (28672 bytes)
[ 0.165605] PM: Registering ACPI NVS region [mem 0xcd0cb000-0xcd176fff] (704512 bytes)
[ 0.165659] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.165697] xor: automatically using best checksumming function:
[ 0.175431] avx : 49520.000 MB/sec
[ 0.175509] NET: Registered protocol family 16
[ 0.193516] cpuidle: using governor ladder
[ 0.212588] cpuidle: using governor menu
[ 0.212628] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.212629] ACPI: bus type PCI registered
[ 0.212662] dca service started, version 1.12.1
[ 0.212678] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.212680] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.212712] PCI: Using configuration type 1 for base access
[ 0.212820] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.241676] raid6: sse2x1 gen() 11371 MB/s
[ 0.258712] raid6: sse2x1 xor() 8513 MB/s
[ 0.275752] raid6: sse2x2 gen() 14207 MB/s
[ 0.292788] raid6: sse2x2 xor() 9580 MB/s
[ 0.309825] raid6: sse2x4 gen() 16644 MB/s
[ 0.326864] raid6: sse2x4 xor() 10484 MB/s
[ 0.343902] raid6: avx2x1 gen() 22089 MB/s
[ 0.360940] raid6: avx2x2 gen() 25675 MB/s
[ 0.377980] raid6: avx2x4 gen() 30035 MB/s
[ 0.377981] raid6: using algorithm avx2x4 gen() 30035 MB/s
[ 0.377981] raid6: using avx2x2 recovery algorithm
[ 0.378005] ACPI: Added _OSI(Module Device)
[ 0.378006] ACPI: Added _OSI(Processor Device)
[ 0.378006] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.378007] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.380121] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.381381] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.381635] ACPI: Dynamic OEM Table Load:
[ 0.381639] ACPI: SSDT 0xFFFF88080A021000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.381998] ACPI: Dynamic OEM Table Load:
[ 0.382001] ACPI: SSDT 0xFFFF88080A41B000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.382381] ACPI: Dynamic OEM Table Load:
[ 0.382383] ACPI: SSDT 0xFFFF88080A030A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.383272] ACPI: Interpreter enabled
[ 0.383276] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[ 0.383280] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.383290] ACPI: (supports S0 S3 S4 S5)
[ 0.383291] ACPI: Using IOAPIC for interrupt routing
[ 0.383323] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388185] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.388189] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.388302] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.388373] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.388374] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.388540] PCI host bridge to bus 0000:00
[ 0.388542] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.388543] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.388544] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.388545] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.388546] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.388547] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
[ 0.388552] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
[ 0.388617] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.388639] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.388687] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[ 0.388707] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.388753] pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400
[ 0.388773] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.388835] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.388849] pci 0000:00:14.0: reg 0x10: [mem 0xe0120000-0xe012ffff 64bit]
[ 0.388896] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.388924] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.388948] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.388962] pci 0000:00:16.0: reg 0x10: [mem 0xe013b000-0xe013b00f 64bit]
[ 0.389011] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.389072] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.389084] pci 0000:00:19.0: reg 0x10: [mem 0xe0100000-0xe011ffff]
[ 0.389090] pci 0000:00:19.0: reg 0x14: [mem 0xe0139000-0xe0139fff]
[ 0.389096] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.389140] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.389168] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.389191] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.389205] pci 0000:00:1a.0: reg 0x10: [mem 0xe0138000-0xe01383ff]
[ 0.389269] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.389306] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.389329] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.389340] pci 0000:00:1b.0: reg 0x10: [mem 0xe0130000-0xe0133fff 64bit]
[ 0.389384] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.389413] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.389435] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.389482] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.389529] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.389551] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.389599] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.389643] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.389670] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.389684] pci 0000:00:1d.0: reg 0x10: [mem 0xe0137000-0xe01373ff]
[ 0.389748] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.389783] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.389807] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.389932] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.389942] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.389948] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.389953] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.389959] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.389964] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.389970] pci 0000:00:1f.2: reg 0x24: [mem 0xe0136000-0xe01367ff]
[ 0.389994] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.390046] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.390057] pci 0000:00:1f.3: reg 0x10: [mem 0xe0135000-0xe01350ff 64bit]
[ 0.390074] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.390154] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
[ 0.390162] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.390167] pci 0000:01:00.0: reg 0x18: [mem 0xe0000000-0xe003ffff 64bit]
[ 0.390171] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.390178] pci 0000:01:00.0: reg 0x30: [mem 0xe0040000-0xe005ffff pref]
[ 0.390199] pci 0000:01:00.0: supports D1 D2
[ 0.390200] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.390232] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
[ 0.390239] pci 0000:01:00.1: reg 0x10: [mem 0xe0060000-0xe0063fff 64bit]
[ 0.390271] pci 0000:01:00.1: supports D1 D2
[ 0.392031] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.392033] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.392035] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe00fffff]
[ 0.392063] pci 0000:02:00.0: [1102:000b] type 00 class 0x040300
[ 0.392078] pci 0000:02:00.0: reg 0x10: [mem 0xe8200000-0xe820ffff 64bit]
[ 0.392089] pci 0000:02:00.0: reg 0x18: [mem 0xe8000000-0xe81fffff 64bit]
[ 0.392099] pci 0000:02:00.0: reg 0x20: [mem 0xe4000000-0xe7ffffff 64bit]
[ 0.394038] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.394040] pci 0000:00:01.1: bridge window [mem 0xe4000000-0xe82fffff]
[ 0.394062] pci 0000:03:00.0: [1c28:0122] type 00 class 0x010601
[ 0.394070] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.394074] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.394079] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.394084] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.394088] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.394093] pci 0000:03:00.0: reg 0x24: [mem 0xe8520000-0xe85201ff]
[ 0.394098] pci 0000:03:00.0: reg 0x30: [mem 0xe8500000-0xe851ffff pref]
[ 0.394119] pci 0000:03:00.0: PME# supported from D3hot
[ 0.396041] pci 0000:00:01.2: PCI bridge to [bus 03]
[ 0.396042] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff]
[ 0.396044] pci 0000:00:01.2: bridge window [mem 0xe8500000-0xe85fffff]
[ 0.396072] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.397450] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601
[ 0.399015] pci 0000:05:00.0: reg 0x10: [io 0xc050-0xc057]
[ 0.399725] pci 0000:05:00.0: reg 0x14: [io 0xc040-0xc043]
[ 0.400804] pci 0000:05:00.0: reg 0x18: [io 0xc030-0xc037]
[ 0.401548] pci 0000:05:00.0: reg 0x1c: [io 0xc020-0xc023]
[ 0.402540] pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc01f]
[ 0.403406] pci 0000:05:00.0: reg 0x24: [mem 0xe8400000-0xe84001ff]
[ 0.423397] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.423399] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.423402] pci 0000:00:1c.2: bridge window [mem 0xe8400000-0xe84fffff]
[ 0.423476] pci_bus 0000:00: on NUMA node 0
[ 0.423928] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.423961] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.423986] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.424009] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.424033] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.424062] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.424085] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.424108] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.424213] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.424256] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.424257] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.424258] vgaarb: loaded
[ 0.424259] vgaarb: bridge control possible 0000:01:00.0
[ 0.424291] SCSI subsystem initialized
[ 0.424300] libata version 3.00 loaded.
[ 0.424315] pps_core: LinuxPPS API ver. 1 registered
[ 0.424316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.424318] PTP clock support registered
[ 0.424376] wmi: Mapper loaded
[ 0.424381] PCI: Using ACPI for IRQ routing
[ 0.425531] PCI: pci_cache_line_size set to 64 bytes
[ 0.425715] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.425716] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.425717] e820: reserve RAM buffer [mem 0xb599b018-0xb7ffffff]
[ 0.425718] e820: reserve RAM buffer [mem 0xb59a4018-0xb7ffffff]
[ 0.425718] e820: reserve RAM buffer [mem 0xb59b5018-0xb7ffffff]
[ 0.425719] e820: reserve RAM buffer [mem 0xb59c2018-0xb7ffffff]
[ 0.425720] e820: reserve RAM buffer [mem 0xb77e8000-0xb7ffffff]
[ 0.425721] e820: reserve RAM buffer [mem 0xb840a000-0xbbffffff]
[ 0.425721] e820: reserve RAM buffer [mem 0xcce88000-0xcfffffff]
[ 0.425722] e820: reserve RAM buffer [mem 0xcd0cb000-0xcfffffff]
[ 0.425723] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.425724] e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff]
[ 0.425804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.425807] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.427830] Switched to clocksource hpet
[ 0.427895] pnp: PnP ACPI init
[ 0.427931] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.427932] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.428014] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.428015] system 00:01: [io 0xffff] has been reserved
[ 0.428016] system 00:01: [io 0xffff] has been reserved
[ 0.428017] system 00:01: [io 0xffff] has been reserved
[ 0.428018] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.428019] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.428020] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.428021] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.428022] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.428022] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.428024] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.428037] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.428062] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.428064] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.428104] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.428105] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.428214] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.428215] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.428454] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.428455] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.428456] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.428457] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.428458] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.428459] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.428460] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.428461] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.428462] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.428463] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.428464] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.428465] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.428466] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.428596] pnp: PnP ACPI: found 7 devices
[ 0.434135] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.434156] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.434157] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.434160] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe00fffff]
[ 0.434163] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.434164] pci 0000:00:01.1: bridge window [mem 0xe4000000-0xe82fffff]
[ 0.434167] pci 0000:00:01.2: PCI bridge to [bus 03]
[ 0.434168] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff]
[ 0.434170] pci 0000:00:01.2: bridge window [mem 0xe8500000-0xe85fffff]
[ 0.434173] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.434181] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.434182] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.434186] pci 0000:00:1c.2: bridge window [mem 0xe8400000-0xe84fffff]
[ 0.434191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.434192] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.434193] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.434194] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
[ 0.434195] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfeafffff window]
[ 0.434196] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.434197] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe00fffff]
[ 0.434198] pci_bus 0000:02: resource 1 [mem 0xe4000000-0xe82fffff]
[ 0.434199] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.434200] pci_bus 0000:03: resource 1 [mem 0xe8500000-0xe85fffff]
[ 0.434200] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.434201] pci_bus 0000:05: resource 1 [mem 0xe8400000-0xe84fffff]
[ 0.434217] NET: Registered protocol family 2
[ 0.434304] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.434486] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.434574] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.434585] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.434633] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.434703] NET: Registered protocol family 1
[ 0.464951] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.464987] PCI: CLS 64 bytes, default 64
[ 0.465009] Unpacking initramfs...
[ 0.559724] Freeing initrd memory: 8180K (ffff88007f803000 - ffff880080000000)
[ 0.559731] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.559732] software IO TLB [mem 0xbb5f4000-0xbf5f4000] (64MB) mapped at [ffff8800bb5f4000-ffff8800bf5f3fff]
[ 0.559769] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.559770] hw unit of domain pp0-core 2^-14 Joules
[ 0.559770] hw unit of domain package 2^-14 Joules
[ 0.559771] hw unit of domain dram 2^-14 Joules
[ 0.559771] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.559864] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes, mapped to 0xffffc90000400000
[ 0.559865] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
[ 0.560937] Console: switching to colour frame buffer device 128x48
[ 0.561935] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.562094] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.562111] Initialise system trusted keyring
[ 0.562126] audit: initializing netlink subsys (disabled)
[ 0.562134] audit: type=2000 audit(1432078238.519:1): initialized
[ 0.562235] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.562235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.563074] zpool: loaded
[ 0.563076] zbud: loaded
[ 0.563395] Key type big_key registered
[ 0.563808] alg: No test for stdrng (krng)
[ 0.563814] Key type asymmetric registered
[ 0.563816] Asymmetric key parser 'x509' registered
[ 0.563837] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.563864] io scheduler noop registered
[ 0.563880] io scheduler cfq registered
[ 0.563895] io scheduler bfq registered (default)
[ 0.563896] BFQ I/O-scheduler version: v7r7-dbg2
[ 0.564288] intel_idle: MWAIT substates: 0x42120
[ 0.564289] intel_idle: v0.4 model 0x3C
[ 0.564290] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.564475] ipmi message handler version 39.2
[ 0.564478] ipmi device interface
[ 0.564488] IPMI System Interface driver.
[ 0.564513] ipmi_si: Unable to find any System Interface(s)
[ 0.564516] IPMI Watchdog: driver initialized
[ 0.564517] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 0.564556] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.564559] ACPI: Power Button [PWRB]
[ 0.564580] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.564581] ACPI: Power Button [PWRF]
[ 0.564749] GHES: HEST is not enabled!
[ 0.564752] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 0.565816] loop: module loaded
[ 0.565820] mtip32xx Version 1.3.1
[ 0.565860] ahci 0000:00:1f.2: version 3.0
[ 0.565954] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.565956] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.567366] scsi host0: ahci
[ 0.567427] scsi host1: ahci
[ 0.567485] scsi host2: ahci
[ 0.567541] scsi host3: ahci
[ 0.567596] scsi host4: ahci
[ 0.567652] scsi host5: ahci
[ 0.567672] ata1: SATA max UDMA/133 abar m2048@0xe0136000 port 0xe0136100 irq 27
[ 0.567674] ata2: SATA max UDMA/133 abar m2048@0xe0136000 port 0xe0136180 irq 27
[ 0.567674] ata3: DUMMY
[ 0.567675] ata4: DUMMY
[ 0.567676] ata5: DUMMY
[ 0.567676] ata6: DUMMY
[ 0.578068] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.578071] ahci 0000:03:00.0: flags: 64bit ncq sntf led pio slum part
[ 0.578188] scsi host6: ahci
[ 0.578211] ata7: SATA max UDMA/133 abar m512@0xe8520000 port 0xe8520100 irq 28
[ 0.581149] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled
[ 0.583086] ahci 0000:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.583088] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 0.584882] scsi host7: ahci
[ 0.584944] scsi host8: ahci
[ 0.585000] ata8: SATA max UDMA/133 abar m512@0xe8400000 port 0xe8400100 irq 29
[ 0.585113] ata9: SATA max UDMA/133 abar m512@0xe8400000 port 0xe8400180 irq 29
[ 0.585127] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.585127] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 0.585631] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.756201] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.756204] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) bc:5f:f4:b0:91:0c
[ 0.756205] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.756243] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 0.756284] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.759165] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.759187] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.759234] mousedev: PS/2 mouse device common for all mice
[ 0.759266] rtc_cmos 00:02: RTC can wake from S4
[ 0.759426] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.759450] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.759458] Intel P-state driver initializing.
[ 0.759979] EFI Variables Facility v0.08 2004-May-17
[ 0.780277] pstore: Registered efi as persistent store backend
[ 0.781084] NET: Registered protocol family 10
[ 0.781435] NET: Registered protocol family 17
[ 0.781450] Key type dns_resolver registered
[ 0.781939] Loading compiled-in X.509 certificates
[ 0.783096] Loaded X.509 cert 'Build time autogenerated kernel key: af297f413024c053f944024f4c628d451afbe676'
[ 0.783107] registered taskstats version 1
[ 0.783653] Btrfs loaded
[ 0.786742] Key type encrypted registered
[ 0.787853] rtc_cmos 00:02: setting system clock to 2015-05-19 23:30:39 UTC (1432078239)
[ 0.787859] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.787860] EDD information not available.
[ 0.787956] PM: Hibernation image not present or could not be loaded.
[ 0.872581] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.872599] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.873990] ata1.00: ATA-8: WDC WD1000DHTZ-04N21V0, 04.06A00, max UDMA/133
[ 0.873993] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.874696] ata1.00: configured for UDMA/133
[ 0.874865] scsi 0:0:0:0: Direct-Access ATA WDC WD1000DHTZ-0 6A00 PQ: 0 ANSI: 5
[ 0.875130] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.875133] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.875143] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.875217] sd 0:0:0:0: [sda] Write Protect is off
[ 0.875220] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.875272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.875622] ata2.00: ATAPI: HL-DT-ST DVDRAM GH24NS50, XP01, max UDMA/100
[ 0.879463] ata2.00: configured for UDMA/100
[ 0.883556] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.885531] ata7.00: ATA-8: PLEXTOR PX-AG512M6e, 1.03, max UDMA/133
[ 0.885533] ata7.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.885805] ata7.00: configured for UDMA/133
[ 0.888048] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS50 XP01 PQ: 0 ANSI: 5
[ 0.891795] ata8: SATA link down (SStatus 0 SControl 300)
[ 0.898141] sda: sda1 sda2 sda3
[ 0.898544] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.918409] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.918411] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.918567] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.918723] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.919082] scsi 6:0:0:0: Direct-Access ATA PLEXTOR PX-AG512 1.03 PQ: 0 ANSI: 5
[ 0.919368] sd 6:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 0.919379] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 0.919967] sd 6:0:0:0: [sdb] Write Protect is off
[ 0.919968] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.919990] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.921174] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[ 0.921622] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 1.226350] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.227245] Freeing unused kernel memory: 856K (ffffffff8187f000 - ffffffff81955000)
[ 1.227246] Write protecting the kernel read-only data: 8192k
[ 1.227511] Freeing unused kernel memory: 312K (ffff8800015b2000 - ffff880001600000)
[ 1.227590] Freeing unused kernel memory: 164K (ffff8800017d7000 - ffff880001800000)
[ 1.257359] random: systemd urandom read with 15 bits of entropy available
[ 1.257656] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 1.257760] systemd[1]: Detected architecture x86-64.
[ 1.257761] systemd[1]: Running in initial RAM disk.
[ 1.257769] systemd[1]: Set hostname to <highlander>.
[ 1.272660] systemd[1]: Cannot add dependency job for unit systemd-journald-audit.socket, ignoring: Unit systemd-journald-audit.socket failed to load: No such file or directory.
[ 1.272681] systemd[1]: Cannot add dependency job for unit systemd-fsckd.socket, ignoring: Unit systemd-fsckd.socket failed to load: No such file or directory.
[ 1.272812] systemd[1]: Reached target Timers.
[ 1.272817] systemd[1]: Starting Timers.
[ 1.272825] systemd[1]: Reached target Local File Systems.
[ 1.272828] systemd[1]: Starting Local File Systems.
[ 1.272842] systemd[1]: Created slice -.slice.
[ 1.272845] systemd[1]: Starting -.slice.
[ 1.272864] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.272867] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.272881] systemd[1]: Listening on Journal Socket.
[ 1.272885] systemd[1]: Starting Journal Socket.
[ 1.272907] systemd[1]: Created slice System Slice.
[ 1.272911] systemd[1]: Starting System Slice.
[ 1.273128] systemd[1]: Starting Load Kernel Modules...
[ 1.273150] systemd[1]: Reached target Slices.
[ 1.273154] systemd[1]: Starting Slices.
[ 1.273170] systemd[1]: Started dracut ask for additional cmdline parameters.
[ 1.273199] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.273203] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.273383] systemd[1]: Starting Journal Service...
[ 1.273399] systemd[1]: Reached target Swap.
[ 1.273404] systemd[1]: Starting Swap.
[ 1.273426] systemd[1]: Listening on udev Control Socket.
[ 1.273430] systemd[1]: Starting udev Control Socket.
[ 1.273468] systemd[1]: Started dracut cmdline hook.
[ 1.273499] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.273503] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.273510] systemd[1]: Reached target Paths.
[ 1.273513] systemd[1]: Starting Paths.
[ 1.273565] systemd[1]: Started dracut pre-udev hook.
[ 1.273588] systemd[1]: Listening on udev Kernel Socket.
[ 1.273591] systemd[1]: Starting udev Kernel Socket.
[ 1.273598] systemd[1]: Reached target Sockets.
[ 1.273601] systemd[1]: Starting Sockets.
[ 1.273763] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.273997] systemd[1]: Started Load Kernel Modules.
[ 1.274392] systemd[1]: Starting Apply Kernel Variables...
[ 1.274513] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.275344] systemd[1]: Started Apply Kernel Variables.
[ 1.275447] systemd-journald[1219]: File /var/log/journal/25670cf3ef015c3b6b55f39200000773/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1.277363] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.278034] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.278264] systemd[1]: Starting udev Kernel Device Manager...
[ 1.279746] systemd[1]: Started udev Kernel Device Manager.
[ 1.279811] systemd[1]: Started dracut pre-trigger hook.
[ 1.279960] systemd[1]: Starting udev Coldplug all Devices...
[ 1.292339] systemd[1]: Started udev Coldplug all Devices.
[ 1.292684] systemd[1]: Starting dracut initqueue hook...
[ 1.294723] systemd[1]: Started Journal Service.
[ 1.299023] ACPI: bus type USB registered
[ 1.299047] usbcore: registered new interface driver usbfs
[ 1.299059] usbcore: registered new interface driver hub
[ 1.299078] usbcore: registered new device driver usb
[ 1.300212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.301146] ehci-pci: EHCI PCI platform driver
[ 1.301253] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.301259] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.301270] ehci-pci 0000:00:1a.0: debug port 2
[ 1.305165] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.305176] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0138000
[ 1.311162] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.311338] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.311339] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.311340] usb usb1: Product: EHCI Host Controller
[ 1.311341] usb usb1: Manufacturer: Linux 4.1.0-rc4-highlander-00006-g2788b57 ehci_hcd
[ 1.311342] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.311474] hub 1-0:1.0: USB hub found
[ 1.311483] hub 1-0:1.0: 2 ports detected
[ 1.311709] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.311712] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.311720] ehci-pci 0000:00:1d.0: debug port 2
[ 1.315609] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.315619] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0137000
[ 1.321177] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.321372] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.321374] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.321375] usb usb2: Product: EHCI Host Controller
[ 1.321386] usb usb2: Manufacturer: Linux 4.1.0-rc4-highlander-00006-g2788b57 ehci_hcd
[ 1.321387] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.321511] hub 2-0:1.0: USB hub found
[ 1.321520] hub 2-0:1.0: 2 ports detected
[ 1.421509] BTRFS: device label ROOT devid 1 transid 185379 /dev/sdb7
[ 1.562495] tsc: Refined TSC clocksource calibration: 3500.017 MHz
[ 1.562497] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x32736103187, max_idle_ns: 440795271008 ns
[ 1.613595] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.623604] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.626798] BTRFS: device label HOME devid 1 transid 140022 /dev/sda1
[ 1.728095] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.728097] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.728261] hub 1-1:1.0: USB hub found
[ 1.728350] hub 1-1:1.0: 6 ports detected
[ 1.738109] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.738110] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.738319] hub 2-1:1.0: USB hub found
[ 1.738483] hub 2-1:1.0: 8 ports detected
[ 1.843658] BTRFS info (device sdb7): disk space caching is enabled
[ 1.852389] BTRFS: detected SSD devices, enabling SSD mode
[ 1.889028] systemd-journald[1219]: Received SIGTERM from PID 1 (systemd).
[ 1.919705] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 2.002149] random: nonblocking pool is initialized
[ 2.149568] fuse init (API version 7.23)
[ 2.380988] BTRFS info (device sdb7): turning on discard
[ 2.380990] BTRFS info (device sdb7): disk space caching is enabled
[ 2.404754] systemd-journald[1971]: Received request to flush runtime journal from PID 1
[ 2.468549] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[ 2.468554] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.473892] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 2.473959] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.473965] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.474052] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 2.474057] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.474141] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.474143] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.474144] usb usb3: Product: xHCI Host Controller
[ 2.474145] usb usb3: Manufacturer: Linux 4.1.0-rc4-highlander-00006-g2788b57 xhci-hcd
[ 2.474146] usb usb3: SerialNumber: 0000:00:14.0
[ 2.474232] hub 3-0:1.0: USB hub found
[ 2.474281] hub 3-0:1.0: 14 ports detected
[ 2.476722] Linux agpgart interface v0.103
[ 2.478310] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.478410] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.478414] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.478462] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.478464] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.478465] usb usb4: Product: xHCI Host Controller
[ 2.478467] usb usb4: Manufacturer: Linux 4.1.0-rc4-highlander-00006-g2788b57 xhci-hcd
[ 2.478468] usb usb4: SerialNumber: 0000:00:14.0
[ 2.478637] hub 4-0:1.0: USB hub found
[ 2.478650] hub 4-0:1.0: 6 ports detected
[ 2.481355] snd_ctxfi 0000:02:00.0: chip 20K2 model SB0880 (1102:0043) is found
[ 2.481362] snd_ctxfi 0000:02:00.0: enabling device (0000 -> 0002)
[ 2.483897] [drm] Initialized drm 1.1.0 20060810
[ 2.485691] AVX2 version of gcm_enc/dec engaged.
[ 2.485692] AES CTR mode by8 optimization enabled
[ 2.487006] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 2.487122] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 2.489955] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.496611] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input6
[ 2.496663] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input7
[ 2.496710] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input8
[ 2.496751] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input9
[ 2.496793] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input10
[ 2.496841] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3/input11
[ 2.501648] alg: No test for crc32 (crc32-pclmul)
[ 2.507606] snd_hda_codec_realtek hdaudioC2D0: ALC1150: SKU not ready 0x00000000
[ 2.507978] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.507980] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.507981] snd_hda_codec_realtek hdaudioC2D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.507982] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 2.507984] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
[ 2.507985] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 2.507986] snd_hda_codec_realtek hdaudioC2D0: Mic=0x18
[ 2.507988] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[ 2.520294] [drm] radeon kernel modesetting enabled.
[ 2.520326] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 2.520328] fb: switching to radeondrmfb from simple
[ 2.520357] Console: switching to colour dummy device 80x25
[ 2.520611] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x1682:0x3214).
[ 2.520621] [drm] register mmio base: 0xE0000000
[ 2.520622] [drm] register mmio size: 262144
[ 2.520675] ATOM BIOS: Tahiti
[ 2.520716] [drm] Changing default dispclk from 500Mhz to 600Mhz
[ 2.520727] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
[ 2.520729] radeon 0000:01:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF
[ 2.520730] [drm] Detected VRAM RAM=3072M, BAR=256M
[ 2.520732] [drm] RAM width 384bits DDR
[ 2.520812] [TTM] Zone kernel: Available graphics memory: 16415974 kiB
[ 2.520813] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.520814] [TTM] Initializing pool allocator
[ 2.520818] [TTM] Initializing DMA pool allocator
[ 2.520830] [drm] radeon: 3072M of VRAM memory ready
[ 2.520831] [drm] radeon: 1024M of GTT memory ready.
[ 2.520838] [drm] Loading tahiti Microcode
[ 2.527580] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input12
[ 2.527629] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input13
[ 2.527672] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
[ 2.527717] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
[ 2.527750] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
[ 2.529860] [drm] Internal thermal controller with fan control
[ 2.529942] [drm] probing gen 2 caps for device 8086:c01 = 261ac83/e
[ 2.534959] [drm] radeon: dpm initialized
[ 2.538310] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.538724] [drm] probing gen 2 caps for device 8086:c01 = 261ac83/e
[ 2.538726] [drm] PCIE gen 3 link speeds already enabled
[ 2.542649] [drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
[ 2.542742] radeon 0000:01:00.0: WB enabled
[ 2.542745] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff880803febc00
[ 2.542746] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff880803febc04
[ 2.542747] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff880803febc08
[ 2.542748] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff880803febc0c
[ 2.542749] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff880803febc10
[ 2.543159] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90000435a18
[ 2.543161] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.543161] [drm] Driver supports precise vblank timestamp query.
[ 2.543162] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.543178] radeon 0000:01:00.0: radeon: using MSI.
[ 2.543192] [drm] radeon: irq initialized.
[ 2.564001] Switched to clocksource tsc
[ 2.568066] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: discard
[ 2.688704] [drm] ring test on 0 succeeded in 1 usecs
[ 2.688709] [drm] ring test on 1 succeeded in 1 usecs
[ 2.688712] [drm] ring test on 2 succeeded in 1 usecs
[ 2.688717] [drm] ring test on 3 succeeded in 3 usecs
[ 2.688721] [drm] ring test on 4 succeeded in 2 usecs
[ 2.782402] usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.795478] usb 4-5: New USB device found, idVendor=174c, idProduct=3074
[ 2.795480] usb 4-5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.795481] usb 4-5: Product: ASM107x
[ 2.795482] usb 4-5: Manufacturer: Asmedia
[ 2.795483] usb 4-5: SerialNumber: 00000000A006
[ 2.795841] hub 4-5:1.0: USB hub found
[ 2.795974] hub 4-5:1.0: 4 ports detected
[ 2.799580] snd_ctxfi 0000:02:00.0: Use xfi-native timer
[ 2.831375] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 2.876110] [drm] ring test on 5 succeeded in 2 usecs
[ 2.876113] [drm] UVD initialized successfully.
[ 2.876247] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.876266] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.876285] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.876299] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.876312] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.996901] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608
[ 2.996913] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.996914] usb 3-2: Product: USB2.0 Hub
[ 2.997494] hub 3-2:1.0: USB hub found
[ 2.997834] hub 3-2:1.0: 4 ports detected
[ 3.080104] usb 4-5.2: new SuperSpeed USB device number 3 using xhci_hcd
[ 3.151864] usb 3-9: new high-speed USB device number 3 using xhci_hcd
[ 3.189317] usb 4-5.2: New USB device found, idVendor=0bda, idProduct=0301
[ 3.189319] usb 4-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.189320] usb 4-5.2: Product: USB3.0 Card Reader
[ 3.189321] usb 4-5.2: Manufacturer: Realtek
[ 3.189322] usb 4-5.2: SerialNumber: 201006010301
[ 3.211813] usb-storage 4-5.2:1.0: USB Mass Storage device detected
[ 3.211843] scsi host9: usb-storage 4-5.2:1.0
[ 3.211882] usbcore: registered new interface driver usb-storage
[ 3.212989] usbcore: registered new interface driver uas
[ 3.317955] usb 3-9: New USB device found, idVendor=174c, idProduct=2074
[ 3.317957] usb 3-9: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.317958] usb 3-9: Product: ASM107x
[ 3.317959] usb 3-9: Manufacturer: Asmedia
[ 3.317960] usb 3-9: SerialNumber: 00000000A006
[ 3.318500] hub 3-9:1.0: USB hub found
[ 3.318679] hub 3-9:1.0: 4 ports detected
[ 3.335303] BTRFS info (device sda1): enabling auto defrag
[ 3.335305] BTRFS info (device sda1): disk space caching is enabled
[ 3.351910] BTRFS: bdev /dev/sda1 errs: wr 0, rd 29, flush 0, corrupt 0, gen 0
[ 3.390454] usb 3-2.1: new full-speed USB device number 4 using xhci_hcd
[ 3.477330] usb 3-2.1: New USB device found, idVendor=046d, idProduct=c52b
[ 3.477332] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.477343] usb 3-2.1: Product: USB Receiver
[ 3.477344] usb 3-2.1: Manufacturer: Logitech
[ 3.548441] [drm] ib test on ring 5 succeeded
[ 3.548843] [drm] Radeon Display Connectors
[ 3.548844] [drm] Connector 0:
[ 3.548845] [drm] DP-1
[ 3.548846] [drm] HPD5
[ 3.548847] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 3.548847] [drm] Encoders:
[ 3.548848] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.548848] [drm] Connector 1:
[ 3.548849] [drm] DP-2
[ 3.548849] [drm] HPD4
[ 3.548850] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 3.548850] [drm] Encoders:
[ 3.548851] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.548851] [drm] Connector 2:
[ 3.548852] [drm] HDMI-A-1
[ 3.548852] [drm] HPD6
[ 3.548853] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 3.548853] [drm] Encoders:
[ 3.548854] [drm] DFP3: INTERNAL_UNIPHY1
[ 3.548854] [drm] Connector 3:
[ 3.548855] [drm] DVI-I-1
[ 3.548855] [drm] HPD3
[ 3.548856] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 3.548856] [drm] Encoders:
[ 3.548857] [drm] DFP4: INTERNAL_UNIPHY
[ 3.548857] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.548858] [drm] Connector 4:
[ 3.548858] [drm] DVI-D-1
[ 3.548859] [drm] HPD1
[ 3.548859] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 3.548860] [drm] Encoders:
[ 3.548860] [drm] DFP5: INTERNAL_UNIPHY1
[ 3.567370] [drm] fb mappable at 0xD0479000
[ 3.567371] [drm] vram apper at 0xD0000000
[ 3.567371] [drm] size 3145728
[ 3.567372] [drm] fb depth is 24
[ 3.567372] [drm] pitch is 4096
[ 3.567418] fbcon: radeondrmfb (fb0) is primary device
[ 3.573492] [drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed
[ 3.573504] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
[ 3.574524] Console: switching to colour frame buffer device 128x48
[ 3.575533] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.575534] radeon 0000:01:00.0: registered panic notifier
[ 3.582468] [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[ 3.627562] usb 3-11: new high-speed USB device number 5 using xhci_hcd
[ 3.793559] usb 3-11: New USB device found, idVendor=058f, idProduct=6362
[ 3.793572] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.793573] usb 3-11: Product: Mass Storage Device
[ 3.793574] usb 3-11: Manufacturer: Generic
[ 3.793574] usb 3-11: SerialNumber: 058F312D81B1
[ 3.794171] usb-storage 3-11:1.0: USB Mass Storage device detected
[ 3.794249] scsi host10: usb-storage 3-11:1.0
[ 3.865185] usb 3-2.2: new full-speed USB device number 6 using xhci_hcd
[ 3.941495] usb 3-2.2: New USB device found, idVendor=0665, idProduct=6000
[ 3.941508] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.941509] usb 3-2.2: Product: Gaming keyboard
[ 3.941510] usb 3-2.2: Manufacturer: EST
[ 4.092282] usb 3-13: new high-speed USB device number 7 using xhci_hcd
[ 4.229436] scsi 9:0:0:0: Direct-Access Generic- USB3.0 CRW-CF/MD 1.00 PQ: 0 ANSI: 4
[ 4.242708] scsi 9:0:0:1: Direct-Access Generic- USB3.0 CRW-SM/xD 1.00 PQ: 0 ANSI: 4
[ 4.255825] scsi 9:0:0:2: Direct-Access Generic- USB3.0 CRW-SD 1.00 PQ: 0 ANSI: 4
[ 4.256682] usb 3-13: New USB device found, idVendor=2001, idProduct=f103
[ 4.256684] usb 3-13: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.257288] hub 3-13:1.0: USB hub found
[ 4.257341] hub 3-13:1.0: 7 ports detected
[ 4.268879] scsi 9:0:0:3: Direct-Access Generic- USB3.0 CRW-MS 1.00 PQ: 0 ANSI: 4
[ 4.282132] scsi 9:0:0:4: Direct-Access Generic- USB3.0 CRW-SD/MS 1.00 PQ: 0 ANSI: 4
[ 4.286754] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 4.286905] sd 9:0:0:1: Attached scsi generic sg4 type 0
[ 4.287010] sd 9:0:0:2: Attached scsi generic sg5 type 0
[ 4.287151] sd 9:0:0:3: Attached scsi generic sg6 type 0
[ 4.287374] sd 9:0:0:4: Attached scsi generic sg7 type 0
[ 4.329853] usb 3-2.3: new full-speed USB device number 8 using xhci_hcd
[ 4.386704] sd 9:0:0:3: [sdf] Attached SCSI removable disk
[ 4.390062] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 4.391750] sd 9:0:0:1: [sdd] Attached SCSI removable disk
[ 4.393839] sd 9:0:0:2: [sde] Attached SCSI removable disk
[ 4.395523] sd 9:0:0:4: [sdg] Attached SCSI removable disk
[ 4.415579] usb 3-2.3: New USB device found, idVendor=1e7d, idProduct=2ced
[ 4.415581] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.415582] usb 3-2.3: Product: ROCCAT Kone
[ 4.415583] usb 3-2.3: Manufacturer: ROCCAT
[ 4.415584] usb 3-2.3: SerialNumber: Kone 1.1000
[ 4.429531] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.437107] usbcore: registered new interface driver usbhid
[ 4.437108] usbhid: USB HID core driver
[ 4.439497] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:0665:6000.0004/input/input17
[ 4.440019] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.1/input2
[ 4.440678] input: ROCCAT ROCCAT Kone as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.0/0003:1E7D:2CED.0007/input/input18
[ 4.489956] hid-generic 0003:0665:6000.0004: input,hidraw1: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:14.0-2.2/input0
[ 4.490057] kone 0003:1E7D:2CED.0007: input,hidraw2: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone] on usb-0000:00:14.0-2.3/input0
[ 4.490324] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:0665:6000.0005/input/input19
[ 4.500313] input: ROCCAT ROCCAT Kone as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.1/0003:1E7D:2CED.0008/input/input20
[ 4.541144] hid-generic 0003:0665:6000.0005: input,hidraw3: USB HID v1.11 Device [EST Gaming keyboard] on usb-0000:00:14.0-2.2/input1
[ 4.541372] input: EST Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.2/0003:0665:6000.0006/input/input21
[ 4.599774] input: Logitech M570 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0009/input/input22
[ 4.643171] kone 0003:1E7D:2CED.0008: input,hidraw4: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone] on usb-0000:00:14.0-2.3/input1
[ 4.694258] hid-generic 0003:0665:6000.0006: input,hidraw5: USB HID v1.11 Keyboard [EST Gaming keyboard] on usb-0000:00:14.0-2.2/input2
[ 4.694357] logitech-hidpp-device 0003:046D:1028.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:14.0-2.1:1
[ 4.797856] scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 4.798289] scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 4.798694] scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 4.799066] scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 4.805478] sd 10:0:0:0: Attached scsi generic sg8 type 0
[ 4.805677] sd 10:0:0:1: Attached scsi generic sg9 type 0
[ 4.805834] sd 10:0:0:2: Attached scsi generic sg10 type 0
[ 4.806079] sd 10:0:0:3: Attached scsi generic sg11 type 0
[ 4.810915] sd 10:0:0:2: [sdj] Attached SCSI removable disk
[ 4.823269] sd 10:0:0:0: [sdh] Attached SCSI removable disk
[ 4.823989] sd 10:0:0:3: [sdk] Attached SCSI removable disk
[ 4.824310] sd 10:0:0:1: [sdi] Attached SCSI removable disk
[ 5.284113] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.618821] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.618873] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.367134] RPC: Registered named UNIX socket transport module.
[ 10.367136] RPC: Registered udp transport module.
[ 10.367137] RPC: Registered tcp transport module.
[ 10.367138] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.369355] FS-Cache: Loaded
[ 10.375184] FS-Cache: Netfs 'nfs' registered for caching
[ 10.381856] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.646100] Bluetooth: Core ver 2.20
[ 10.646113] NET: Registered protocol family 31
[ 10.646114] Bluetooth: HCI device and connection manager initialized
[ 10.646117] Bluetooth: HCI socket layer initialized
[ 10.646119] Bluetooth: L2CAP socket layer initialized
[ 10.646122] Bluetooth: SCO socket layer initialized
[ 10.652164] Netfilter messages via NETLINK v0.30.
[ 10.666868] device eth0 entered promiscuous mode
[ 21.832973] net_ratelimit: 1 callbacks suppressed
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 4.1-rc4 display-port on radeon not working
2015-05-19 22:03 4.1-rc4 display-port on radeon not working Malte Schröder
@ 2015-05-20 15:37 ` Alex Deucher
0 siblings, 0 replies; 7+ messages in thread
From: Alex Deucher @ 2015-05-20 15:37 UTC (permalink / raw)
To: Malte Schröder; +Cc: Maling list - DRI developers, LKML
On Tue, May 19, 2015 at 6:03 PM, Malte Schröder <malte@tnxip.de> wrote:
> Hi,
> with 4.1-rc display-port on my Tahiti XT stopped working. I used the
> firmware from http://people.freedesktop.org/~agd5f/radeon_ucode/ as of
> today.
> Note: the display is an Asus PB278, it used to have problems with
> display port negotiation, but those disappeared like a year ago.
>
Does booting with radeon.auxch=0 on the kernel command line in grub
help? Can you bisect?
Alex
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 4.1-rc4 display-port on radeon not working
@ 2015-05-20 15:37 ` Alex Deucher
0 siblings, 0 replies; 7+ messages in thread
From: Alex Deucher @ 2015-05-20 15:37 UTC (permalink / raw)
To: Malte Schröder; +Cc: LKML, Maling list - DRI developers
On Tue, May 19, 2015 at 6:03 PM, Malte Schröder <malte@tnxip.de> wrote:
> Hi,
> with 4.1-rc display-port on my Tahiti XT stopped working. I used the
> firmware from http://people.freedesktop.org/~agd5f/radeon_ucode/ as of
> today.
> Note: the display is an Asus PB278, it used to have problems with
> display port negotiation, but those disappeared like a year ago.
>
Does booting with radeon.auxch=0 on the kernel command line in grub
help? Can you bisect?
Alex
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 4.1-rc4 display-port on radeon not working
2015-05-20 15:37 ` Alex Deucher
(?)
@ 2015-05-20 16:57 ` Malte Schröder
2015-05-20 22:04 ` Alex Deucher
-1 siblings, 1 reply; 7+ messages in thread
From: Malte Schröder @ 2015-05-20 16:57 UTC (permalink / raw)
To: Alex Deucher; +Cc: Maling list - DRI developers, LKML
[-- Attachment #1: Type: text/plain, Size: 772 bytes --]
On 05/20/15 17:37, Alex Deucher wrote:
> On Tue, May 19, 2015 at 6:03 PM, Malte Schröder <malte@tnxip.de> wrote:
>> Hi,
>> with 4.1-rc display-port on my Tahiti XT stopped working. I used the
>> firmware from http://people.freedesktop.org/~agd5f/radeon_ucode/ as of
>> today.
>> Note: the display is an Asus PB278, it used to have problems with
>> display port negotiation, but those disappeared like a year ago.
>>
>
> Does booting with radeon.auxch=0 on the kernel command line in grub
> help? Can you bisect?
>
> Alex
>
Yes, radeon.auxch=0 helps. As for bisecting, I can try, but I won't have
time for that until next week.
--
Gruß
Malte Schröder
---------------------------------------------------------------------
MalteSch@gmx.de
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 4.1-rc4 display-port on radeon not working
2015-05-20 16:57 ` Malte Schröder
@ 2015-05-20 22:04 ` Alex Deucher
0 siblings, 0 replies; 7+ messages in thread
From: Alex Deucher @ 2015-05-20 22:04 UTC (permalink / raw)
To: Malte Schröder; +Cc: Maling list - DRI developers, LKML
[-- Attachment #1: Type: text/plain, Size: 989 bytes --]
On Wed, May 20, 2015 at 12:57 PM, Malte Schröder <malte@tnxip.de> wrote:
> On 05/20/15 17:37, Alex Deucher wrote:
>> On Tue, May 19, 2015 at 6:03 PM, Malte Schröder <malte@tnxip.de> wrote:
>>> Hi,
>>> with 4.1-rc display-port on my Tahiti XT stopped working. I used the
>>> firmware from http://people.freedesktop.org/~agd5f/radeon_ucode/ as of
>>> today.
>>> Note: the display is an Asus PB278, it used to have problems with
>>> display port negotiation, but those disappeared like a year ago.
>>>
>>
>> Does booting with radeon.auxch=0 on the kernel command line in grub
>> help? Can you bisect?
>>
>> Alex
>>
>
> Yes, radeon.auxch=0 helps. As for bisecting, I can try, but I won't have
> time for that until next week.
No need to bisect. if auxch=0 helps, I know what commit broke it.
Does the attached patch help?
Alex
>
> --
> Gruß
> Malte Schröder
> ---------------------------------------------------------------------
> MalteSch@gmx.de
>
[-- Attachment #2: 0001-drm-radeon-fix-error-flag-checking-in-native-aux-pat.patch --]
[-- Type: text/x-patch, Size: 1055 bytes --]
From e3e5efb1e3f9d3f16a6521c56cde7a7b1c83a2e8 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Wed, 20 May 2015 17:58:49 -0400
Subject: [PATCH] drm/radeon: fix error flag checking in native aux path
That atom table does not check these bits. Fixes aux
regressions on some boards.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
---
drivers/gpu/drm/radeon/radeon_dp_auxch.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c
index bf1fecc..fcbd60b 100644
--- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c
+++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c
@@ -30,8 +30,6 @@
AUX_SW_RX_HPD_DISCON | \
AUX_SW_RX_PARTIAL_BYTE | \
AUX_SW_NON_AUX_MODE | \
- AUX_SW_RX_MIN_COUNT_VIOL | \
- AUX_SW_RX_INVALID_STOP | \
AUX_SW_RX_SYNC_INVALID_L | \
AUX_SW_RX_SYNC_INVALID_H | \
AUX_SW_RX_INVALID_START | \
--
1.8.3.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: 4.1-rc4 display-port on radeon not working
@ 2015-05-20 22:04 ` Alex Deucher
0 siblings, 0 replies; 7+ messages in thread
From: Alex Deucher @ 2015-05-20 22:04 UTC (permalink / raw)
To: Malte Schröder; +Cc: LKML, Maling list - DRI developers
[-- Attachment #1: Type: text/plain, Size: 989 bytes --]
On Wed, May 20, 2015 at 12:57 PM, Malte Schröder <malte@tnxip.de> wrote:
> On 05/20/15 17:37, Alex Deucher wrote:
>> On Tue, May 19, 2015 at 6:03 PM, Malte Schröder <malte@tnxip.de> wrote:
>>> Hi,
>>> with 4.1-rc display-port on my Tahiti XT stopped working. I used the
>>> firmware from http://people.freedesktop.org/~agd5f/radeon_ucode/ as of
>>> today.
>>> Note: the display is an Asus PB278, it used to have problems with
>>> display port negotiation, but those disappeared like a year ago.
>>>
>>
>> Does booting with radeon.auxch=0 on the kernel command line in grub
>> help? Can you bisect?
>>
>> Alex
>>
>
> Yes, radeon.auxch=0 helps. As for bisecting, I can try, but I won't have
> time for that until next week.
No need to bisect. if auxch=0 helps, I know what commit broke it.
Does the attached patch help?
Alex
>
> --
> Gruß
> Malte Schröder
> ---------------------------------------------------------------------
> MalteSch@gmx.de
>
[-- Attachment #2: 0001-drm-radeon-fix-error-flag-checking-in-native-aux-pat.patch --]
[-- Type: text/x-patch, Size: 1055 bytes --]
From e3e5efb1e3f9d3f16a6521c56cde7a7b1c83a2e8 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Wed, 20 May 2015 17:58:49 -0400
Subject: [PATCH] drm/radeon: fix error flag checking in native aux path
That atom table does not check these bits. Fixes aux
regressions on some boards.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
---
drivers/gpu/drm/radeon/radeon_dp_auxch.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c
index bf1fecc..fcbd60b 100644
--- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c
+++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c
@@ -30,8 +30,6 @@
AUX_SW_RX_HPD_DISCON | \
AUX_SW_RX_PARTIAL_BYTE | \
AUX_SW_NON_AUX_MODE | \
- AUX_SW_RX_MIN_COUNT_VIOL | \
- AUX_SW_RX_INVALID_STOP | \
AUX_SW_RX_SYNC_INVALID_L | \
AUX_SW_RX_SYNC_INVALID_H | \
AUX_SW_RX_INVALID_START | \
--
1.8.3.1
[-- Attachment #3: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: 4.1-rc4 display-port on radeon not working
2015-05-20 22:04 ` Alex Deucher
(?)
@ 2015-05-21 7:50 ` Malte Schröder
-1 siblings, 0 replies; 7+ messages in thread
From: Malte Schröder @ 2015-05-21 7:50 UTC (permalink / raw)
To: Alex Deucher; +Cc: Maling list - DRI developers, LKML
[-- Attachment #1: Type: text/plain, Size: 1094 bytes --]
On 05/21/15 00:04, Alex Deucher wrote:
> On Wed, May 20, 2015 at 12:57 PM, Malte Schröder <malte@tnxip.de> wrote:
>> On 05/20/15 17:37, Alex Deucher wrote:
>>> On Tue, May 19, 2015 at 6:03 PM, Malte Schröder <malte@tnxip.de> wrote:
>>>> Hi,
>>>> with 4.1-rc display-port on my Tahiti XT stopped working. I used the
>>>> firmware from http://people.freedesktop.org/~agd5f/radeon_ucode/ as of
>>>> today.
>>>> Note: the display is an Asus PB278, it used to have problems with
>>>> display port negotiation, but those disappeared like a year ago.
>>>>
>>>
>>> Does booting with radeon.auxch=0 on the kernel command line in grub
>>> help? Can you bisect?
>>>
>>> Alex
>>>
>>
>> Yes, radeon.auxch=0 helps. As for bisecting, I can try, but I won't have
>> time for that until next week.
>
> No need to bisect. if auxch=0 helps, I know what commit broke it.
> Does the attached patch help?
Yes, this patch does fix the problem for me :)
>
> Alex
--
Gruß
Malte Schröder
---------------------------------------------------------------------
MalteSch@gmx.de
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-05-21 7:50 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-19 22:03 4.1-rc4 display-port on radeon not working Malte Schröder
2015-05-20 15:37 ` Alex Deucher
2015-05-20 15:37 ` Alex Deucher
2015-05-20 16:57 ` Malte Schröder
2015-05-20 22:04 ` Alex Deucher
2015-05-20 22:04 ` Alex Deucher
2015-05-21 7:50 ` Malte Schröder
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.