[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Hans de Goede]

The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
the same dts for both models. Unfortunately this does not work for the otg
controller, on the M9 this is routed to a micro-usb connector on the outside,
while as on the A1000G-quad it is connected to an usb to sata bridge
(which is not populated on the M9 pcb).

This commit adds a new dts for the Mele-A1000G-quad to allow using
different otg controller settings on the 2 boards.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/Makefile                                        | 1 +
 arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
 arch/arm/boot/dts/sun6i-a31-m9.dts                                | 2 +-
 3 files changed, 4 insertions(+), 3 deletions(-)
 copy arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} (97%)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b308baf..a413d7b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -546,6 +546,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-utoo-p66.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-a1000g-quad.dtb \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
 	sun6i-a31-hummingbird.dtb \
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-a1000g-quad.dts
similarity index 97%
copy from arch/arm/boot/dts/sun6i-a31-m9.dts
copy to arch/arm/boot/dts/sun6i-a31-a1000g-quad.dts
index a5660d6..4404f37 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-a1000g-quad.dts
@@ -48,8 +48,8 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
-	model = "Mele M9 / A1000G Quad top set box";
-	compatible = "mele,m9", "allwinner,sun6i-a31";
+	model = "Mele A1000G Quad top set box";
+	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
 
 	aliases {
 		serial0 = &uart0;
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index a5660d6..6e0e5687 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -48,7 +48,7 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
-	model = "Mele M9 / A1000G Quad top set box";
+	model = "Mele M9 top set box";
 	compatible = "mele,m9", "allwinner,sun6i-a31";
 
 	aliases {
-- 
2.4.2

[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Hans de Goede]

The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
the same dts for both models. Unfortunately this does not work for the otg
controller, on the M9 this is routed to a micro-usb connector on the outside,
while as on the A1000G-quad it is connected to an usb to sata bridge
(which is not populated on the M9 pcb).

This commit adds a new dts for the Mele-A1000G-quad to allow using
different otg controller settings on the 2 boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/Makefile                                        | 1 +
 arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
 arch/arm/boot/dts/sun6i-a31-m9.dts                                | 2 +-
 3 files changed, 4 insertions(+), 3 deletions(-)
 copy arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} (97%)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b308baf..a413d7b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -546,6 +546,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-utoo-p66.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-a1000g-quad.dtb \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
 	sun6i-a31-hummingbird.dtb \
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-a1000g-quad.dts
similarity index 97%
copy from arch/arm/boot/dts/sun6i-a31-m9.dts
copy to arch/arm/boot/dts/sun6i-a31-a1000g-quad.dts
index a5660d6..4404f37 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-a1000g-quad.dts
@@ -48,8 +48,8 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
-	model = "Mele M9 / A1000G Quad top set box";
-	compatible = "mele,m9", "allwinner,sun6i-a31";
+	model = "Mele A1000G Quad top set box";
+	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
 
 	aliases {
 		serial0 = &uart0;
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index a5660d6..6e0e5687 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -48,7 +48,7 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
-	model = "Mele M9 / A1000G Quad top set box";
+	model = "Mele M9 top set box";
 	compatible = "mele,m9", "allwinner,sun6i-a31";
 
 	aliases {
-- 
2.4.2

Re: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Ian Campbell]

On Mon, 2015-06-01 at 17:02 +0200, Hans de Goede wrote:
> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> the same dts for both models. Unfortunately this does not work for the otg
> controller, on the M9 this is routed to a micro-usb connector on the outside,
> while as on the A1000G-quad it is connected to an usb to sata bridge
> (which is not populated on the M9 pcb).
> 
> This commit adds a new dts for the Mele-A1000G-quad to allow using
> different otg controller settings on the 2 boards.

But isn't intending to actually change the otg settings, right?

[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Ian Campbell]

On Mon, 2015-06-01 at 17:02 +0200, Hans de Goede wrote:
> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> the same dts for both models. Unfortunately this does not work for the otg
> controller, on the M9 this is routed to a micro-usb connector on the outside,
> while as on the A1000G-quad it is connected to an usb to sata bridge
> (which is not populated on the M9 pcb).
> 
> This commit adds a new dts for the Mele-A1000G-quad to allow using
> different otg controller settings on the 2 boards.

But isn't intending to actually change the otg settings, right?

Re: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Hans de Goede]

Hi,

On 01-06-15 20:07, Ian Campbell wrote:
> On Mon, 2015-06-01 at 17:02 +0200, Hans de Goede wrote:
>> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
>> the same dts for both models. Unfortunately this does not work for the otg
>> controller, on the M9 this is routed to a micro-usb connector on the outside,
>> while as on the A1000G-quad it is connected to an usb to sata bridge
>> (which is not populated on the M9 pcb).
>>
>> This commit adds a new dts for the Mele-A1000G-quad to allow using
>> different otg controller settings on the 2 boards.
>
> But isn't intending to actually change the otg settings, right?

Right, that comes in a separate commit as the otg kernel driver is
still in the process of being merged. For those curious the actual commit
making the changes can be found in my sunxi-wip kernel branch (hint
it is a boring change, do not bother looking).

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Hans de Goede]

Hi,

On 01-06-15 20:07, Ian Campbell wrote:
> On Mon, 2015-06-01 at 17:02 +0200, Hans de Goede wrote:
>> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
>> the same dts for both models. Unfortunately this does not work for the otg
>> controller, on the M9 this is routed to a micro-usb connector on the outside,
>> while as on the A1000G-quad it is connected to an usb to sata bridge
>> (which is not populated on the M9 pcb).
>>
>> This commit adds a new dts for the Mele-A1000G-quad to allow using
>> different otg controller settings on the 2 boards.
>
> But isn't intending to actually change the otg settings, right?

Right, that comes in a separate commit as the otg kernel driver is
still in the process of being merged. For those curious the actual commit
making the changes can be found in my sunxi-wip kernel branch (hint
it is a boring change, do not bother looking).

Regards,

Hans

Re: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1048 bytes --]

On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> the same dts for both models. Unfortunately this does not work for the otg
> controller, on the M9 this is routed to a micro-usb connector on the outside,
> while as on the A1000G-quad it is connected to an usb to sata bridge
> (which is not populated on the M9 pcb).
> 
> This commit adds a new dts for the Mele-A1000G-quad to allow using
> different otg controller settings on the 2 boards.
> 
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
>  arch/arm/boot/dts/Makefile                                        | 1 +
>  arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--

Didn't we say that we were trying to set the vendor name in the DTs
now, at least for the new ones?

I can fix this and apply it if it's ok for you.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Maxime Ripard]

On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> the same dts for both models. Unfortunately this does not work for the otg
> controller, on the M9 this is routed to a micro-usb connector on the outside,
> while as on the A1000G-quad it is connected to an usb to sata bridge
> (which is not populated on the M9 pcb).
> 
> This commit adds a new dts for the Mele-A1000G-quad to allow using
> different otg controller settings on the 2 boards.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  arch/arm/boot/dts/Makefile                                        | 1 +
>  arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--

Didn't we say that we were trying to set the vendor name in the DTs
now, at least for the new ones?

I can fix this and apply it if it's ok for you.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150602/0c6d6879/attachment.sig>

Re: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Hans de Goede]

Hi,

On 06/02/2015 05:58 PM, Maxime Ripard wrote:
> On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
>> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
>> the same dts for both models. Unfortunately this does not work for the otg
>> controller, on the M9 this is routed to a micro-usb connector on the outside,
>> while as on the A1000G-quad it is connected to an usb to sata bridge
>> (which is not populated on the M9 pcb).
>>
>> This commit adds a new dts for the Mele-A1000G-quad to allow using
>> different otg controller settings on the 2 boards.
>>
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>>   arch/arm/boot/dts/Makefile                                        | 1 +
>>   arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
>
> Didn't we say that we were trying to set the vendor name in the DTs
> now, at least for the new ones?

I think we said that Paul would write a proposal to standardize
naming for future boards, but that never materialized.

> I can fix this and apply it if it's ok for you.

I'm fine with throwing -mele- in there, or not, what ever you
prefer.

Regards,

Hans

>
> Maxime
>

[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Hans de Goede]

Hi,

On 06/02/2015 05:58 PM, Maxime Ripard wrote:
> On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
>> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
>> the same dts for both models. Unfortunately this does not work for the otg
>> controller, on the M9 this is routed to a micro-usb connector on the outside,
>> while as on the A1000G-quad it is connected to an usb to sata bridge
>> (which is not populated on the M9 pcb).
>>
>> This commit adds a new dts for the Mele-A1000G-quad to allow using
>> different otg controller settings on the 2 boards.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   arch/arm/boot/dts/Makefile                                        | 1 +
>>   arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
>
> Didn't we say that we were trying to set the vendor name in the DTs
> now, at least for the new ones?

I think we said that Paul would write a proposal to standardize
naming for future boards, but that never materialized.

> I can fix this and apply it if it's ok for you.

I'm fine with throwing -mele- in there, or not, what ever you
prefer.

Regards,

Hans

>
> Maxime
>

Re: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1609 bytes --]

On Tue, Jun 02, 2015 at 08:32:59PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 06/02/2015 05:58 PM, Maxime Ripard wrote:
> >On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
> >>The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> >>the same dts for both models. Unfortunately this does not work for the otg
> >>controller, on the M9 this is routed to a micro-usb connector on the outside,
> >>while as on the A1000G-quad it is connected to an usb to sata bridge
> >>(which is not populated on the M9 pcb).
> >>
> >>This commit adds a new dts for the Mele-A1000G-quad to allow using
> >>different otg controller settings on the 2 boards.
> >>
> >>Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> >>---
> >>  arch/arm/boot/dts/Makefile                                        | 1 +
> >>  arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
> >
> >Didn't we say that we were trying to set the vendor name in the DTs
> >now, at least for the new ones?
> 
> I think we said that Paul would write a proposal to standardize
> naming for future boards, but that never materialized.
> 
> >I can fix this and apply it if it's ok for you.
> 
> I'm fine with throwing -mele- in there, or not, what ever you
> prefer.

Ok, applied and fixed the name.

This is probably going to be the last patch pulled for 4.2, unless
something important shows up in the next few days.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Maxime Ripard]

On Tue, Jun 02, 2015 at 08:32:59PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 06/02/2015 05:58 PM, Maxime Ripard wrote:
> >On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
> >>The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> >>the same dts for both models. Unfortunately this does not work for the otg
> >>controller, on the M9 this is routed to a micro-usb connector on the outside,
> >>while as on the A1000G-quad it is connected to an usb to sata bridge
> >>(which is not populated on the M9 pcb).
> >>
> >>This commit adds a new dts for the Mele-A1000G-quad to allow using
> >>different otg controller settings on the 2 boards.
> >>
> >>Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> >>---
> >>  arch/arm/boot/dts/Makefile                                        | 1 +
> >>  arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
> >
> >Didn't we say that we were trying to set the vendor name in the DTs
> >now, at least for the new ones?
> 
> I think we said that Paul would write a proposal to standardize
> naming for future boards, but that never materialized.
> 
> >I can fix this and apply it if it's ok for you.
> 
> I'm fine with throwing -mele- in there, or not, what ever you
> prefer.

Ok, applied and fixed the name.

This is probably going to be the last patch pulled for 4.2, unless
something important shows up in the next few days.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150602/8cf8a62b/attachment.sig>

Re: [linux-sunxi] Re: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Hans de Goede]

Hi,

On 02-06-15 23:49, Maxime Ripard wrote:
> On Tue, Jun 02, 2015 at 08:32:59PM +0200, Hans de Goede wrote:
>> Hi,
>>
>> On 06/02/2015 05:58 PM, Maxime Ripard wrote:
>>> On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
>>>> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
>>>> the same dts for both models. Unfortunately this does not work for the otg
>>>> controller, on the M9 this is routed to a micro-usb connector on the outside,
>>>> while as on the A1000G-quad it is connected to an usb to sata bridge
>>>> (which is not populated on the M9 pcb).
>>>>
>>>> This commit adds a new dts for the Mele-A1000G-quad to allow using
>>>> different otg controller settings on the 2 boards.
>>>>
>>>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>>>> ---
>>>>   arch/arm/boot/dts/Makefile                                        | 1 +
>>>>   arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
>>>
>>> Didn't we say that we were trying to set the vendor name in the DTs
>>> now, at least for the new ones?
>>
>> I think we said that Paul would write a proposal to standardize
>> naming for future boards, but that never materialized.
>>
>>> I can fix this and apply it if it's ok for you.
>>
>> I'm fine with throwing -mele- in there, or not, what ever you
>> prefer.
>
> Ok, applied and fixed the name.
>
> This is probably going to be the last patch pulled for 4.2, unless
> something important shows up in the next few days.

That is fine with me, the only thing which I've pending on the dts
side is a hole lot of musb related patches which belong in 4.3 anyways.

What about the "ARM: dts: sun8i: Add Ippo-q8h v1.2 with A33 and 1024x600 lcd support"
commit? You had a remark on doing that differently to which I replied,
so that one is still in limbo a bit...

Regards,

Hans

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[linux-sunxi] Re: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

[Hans de Goede]

Hi,

On 02-06-15 23:49, Maxime Ripard wrote:
> On Tue, Jun 02, 2015 at 08:32:59PM +0200, Hans de Goede wrote:
>> Hi,
>>
>> On 06/02/2015 05:58 PM, Maxime Ripard wrote:
>>> On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
>>>> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
>>>> the same dts for both models. Unfortunately this does not work for the otg
>>>> controller, on the M9 this is routed to a micro-usb connector on the outside,
>>>> while as on the A1000G-quad it is connected to an usb to sata bridge
>>>> (which is not populated on the M9 pcb).
>>>>
>>>> This commit adds a new dts for the Mele-A1000G-quad to allow using
>>>> different otg controller settings on the 2 boards.
>>>>
>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>> ---
>>>>   arch/arm/boot/dts/Makefile                                        | 1 +
>>>>   arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--
>>>
>>> Didn't we say that we were trying to set the vendor name in the DTs
>>> now, at least for the new ones?
>>
>> I think we said that Paul would write a proposal to standardize
>> naming for future boards, but that never materialized.
>>
>>> I can fix this and apply it if it's ok for you.
>>
>> I'm fine with throwing -mele- in there, or not, what ever you
>> prefer.
>
> Ok, applied and fixed the name.
>
> This is probably going to be the last patch pulled for 4.2, unless
> something important shows up in the next few days.

That is fine with me, the only thing which I've pending on the dts
side is a hole lot of musb related patches which belong in 4.3 anyways.

What about the "ARM: dts: sun8i: Add Ippo-q8h v1.2 with A33 and 1024x600 lcd support"
commit? You had a remark on doing that differently to which I replied,
so that one is still in limbo a bit...

Regards,

Hans