From: Daniel Thompson <daniel.thompson@linaro.org>
To: Stephen Boyd <sboyd@codeaurora.org>
Cc: Mike Turquette <mturquette@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Kamil Lulko <rev13@wp.pl>, Andreas Farber <afaerber@suse.de>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, patches@linaro.org,
linaro-kernel@lists.linaro.org
Subject: Re: [PATCH v3 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices
Date: Tue, 23 Jun 2015 09:22:01 +0100 [thread overview]
Message-ID: <55891729.7070809@linaro.org> (raw)
In-Reply-To: <20150622224832.GI22132@codeaurora.org>
On 22/06/15 23:48, Stephen Boyd wrote:
> On 06/10, Daniel Thompson wrote:
>> This patchset implements a clock driver for STM32F42xxx and STM32F43xxx
>> series devices. It supports decoding the state configured by the
>> bootloader (PLL, clock select, bus dividers) and all the gates clocks.
>> It does not currently support the I2S and SAI PLLs.
>>
>> Relies on "Add support to STMicroeletronics STM32 family" v9 by Maxime
>> Coquelin: http://thread.gmane.org/gmane.linux.kernel/1961049 .
>>
>
> I applied 1 and 2. Looks like #3 should go through arm-soc at
> some later time?
Agreed (that is also the patch that must be correctly ordered w.r.t.
Maxime's patches).
Thanks.
Daniel.
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Thompson <daniel.thompson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Maxime Coquelin
<mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Kamil Lulko <rev13-5tc4TXWwyLM@public.gmane.org>,
Andreas Farber <afaerber-l3A5Bk7waGM@public.gmane.org>,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org
Subject: Re: [PATCH v3 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices
Date: Tue, 23 Jun 2015 09:22:01 +0100 [thread overview]
Message-ID: <55891729.7070809@linaro.org> (raw)
In-Reply-To: <20150622224832.GI22132-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
On 22/06/15 23:48, Stephen Boyd wrote:
> On 06/10, Daniel Thompson wrote:
>> This patchset implements a clock driver for STM32F42xxx and STM32F43xxx
>> series devices. It supports decoding the state configured by the
>> bootloader (PLL, clock select, bus dividers) and all the gates clocks.
>> It does not currently support the I2S and SAI PLLs.
>>
>> Relies on "Add support to STMicroeletronics STM32 family" v9 by Maxime
>> Coquelin: http://thread.gmane.org/gmane.linux.kernel/1961049 .
>>
>
> I applied 1 and 2. Looks like #3 should go through arm-soc at
> some later time?
Agreed (that is also the patch that must be correctly ordered w.r.t.
Maxime's patches).
Thanks.
Daniel.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: daniel.thompson@linaro.org (Daniel Thompson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices
Date: Tue, 23 Jun 2015 09:22:01 +0100 [thread overview]
Message-ID: <55891729.7070809@linaro.org> (raw)
In-Reply-To: <20150622224832.GI22132@codeaurora.org>
On 22/06/15 23:48, Stephen Boyd wrote:
> On 06/10, Daniel Thompson wrote:
>> This patchset implements a clock driver for STM32F42xxx and STM32F43xxx
>> series devices. It supports decoding the state configured by the
>> bootloader (PLL, clock select, bus dividers) and all the gates clocks.
>> It does not currently support the I2S and SAI PLLs.
>>
>> Relies on "Add support to STMicroeletronics STM32 family" v9 by Maxime
>> Coquelin: http://thread.gmane.org/gmane.linux.kernel/1961049 .
>>
>
> I applied 1 and 2. Looks like #3 should go through arm-soc at
> some later time?
Agreed (that is also the patch that must be correctly ordered w.r.t.
Maxime's patches).
Thanks.
Daniel.
next prev parent reply other threads:[~2015-06-23 8:22 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 20:41 [RFC PATCH 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Daniel Thompson
2015-05-22 20:41 ` Daniel Thompson
2015-05-22 20:41 ` [RFC PATCH 1/3] dt-bindings: Document the STM32F4 clock bindings Daniel Thompson
2015-05-22 20:41 ` Daniel Thompson
2015-05-22 20:41 ` Daniel Thompson
2015-05-22 20:41 ` [RFC PATCH 2/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Daniel Thompson
2015-05-22 20:41 ` Daniel Thompson
2015-06-04 22:07 ` Stephen Boyd
2015-06-04 22:07 ` Stephen Boyd
2015-06-05 9:36 ` Daniel Thompson
2015-06-05 9:36 ` Daniel Thompson
2015-06-06 0:10 ` Stephen Boyd
2015-06-06 0:10 ` Stephen Boyd
2015-05-22 20:41 ` [RFC PATCH 3/3] ARM: dts: stm32f429: Adopt STM32F4 clock driver Daniel Thompson
2015-05-22 20:41 ` Daniel Thompson
2015-05-26 16:41 ` [RFC PATCH 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Maxime Coquelin
2015-05-26 16:41 ` Maxime Coquelin
2015-05-26 16:41 ` Maxime Coquelin
2015-05-27 8:36 ` Daniel Thompson
2015-05-27 8:36 ` Daniel Thompson
2015-05-27 8:36 ` Daniel Thompson
2015-05-27 8:36 ` Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 0/4] " Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 1/4] ARM: stm32: Enable clock source Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 2/4] dt-bindings: Document the STM32F4 clock bindings Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 9:21 ` Maxime Coquelin
2015-05-30 9:21 ` Maxime Coquelin
2015-05-30 9:21 ` Maxime Coquelin
2015-06-01 7:46 ` Daniel Thompson
2015-06-01 7:46 ` Daniel Thompson
2015-06-01 7:46 ` Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 3/4] clk: stm32: Add clock driver for STM32F4[23]xxx devices Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 9:15 ` Maxime Coquelin
2015-05-30 9:15 ` Maxime Coquelin
2015-06-01 7:18 ` Daniel Thompson
2015-06-01 7:18 ` Daniel Thompson
2015-06-01 7:18 ` Daniel Thompson
2015-05-30 7:54 ` [PATCH v2 4/4] ARM: dts: stm32f429: Adopt STM32F4 clock driver Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 7:54 ` Daniel Thompson
2015-05-30 9:38 ` Maxime Coquelin
2015-05-30 9:38 ` Maxime Coquelin
2015-05-30 8:40 ` [PATCH v2 0/4] clk: stm32: Add clock driver for STM32F4[23]xxx devices Maxime Coquelin
2015-05-30 8:40 ` Maxime Coquelin
2015-06-10 20:09 ` [PATCH v3 0/3] " Daniel Thompson
2015-06-10 20:09 ` Daniel Thompson
2015-06-10 20:09 ` Daniel Thompson
2015-06-10 20:09 ` [PATCH v3 1/3] dt-bindings: Document the STM32F4 clock bindings Daniel Thompson
2015-06-10 20:09 ` Daniel Thompson
2015-06-10 20:09 ` Daniel Thompson
2015-06-12 7:25 ` Maxime Coquelin
2015-06-12 7:25 ` Maxime Coquelin
2015-06-12 7:25 ` Maxime Coquelin
2015-06-22 22:47 ` Stephen Boyd
2015-06-22 22:47 ` Stephen Boyd
2015-06-22 22:47 ` Stephen Boyd
2015-06-10 20:09 ` [PATCH v3 2/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Daniel Thompson
2015-06-10 20:09 ` Daniel Thompson
2015-06-10 20:09 ` Daniel Thompson
2015-06-22 22:48 ` Stephen Boyd
2015-06-22 22:48 ` Stephen Boyd
2015-06-22 22:48 ` Stephen Boyd
2015-06-22 22:48 ` Stephen Boyd
2015-06-22 23:21 ` Stephen Boyd
2015-06-22 23:21 ` Stephen Boyd
2015-06-22 23:21 ` Stephen Boyd
2015-06-23 8:25 ` Daniel Thompson
2015-06-23 8:25 ` Daniel Thompson
2015-06-23 8:25 ` Daniel Thompson
2015-06-10 20:09 ` [PATCH v3 3/3] ARM: dts: stm32f429: Adopt STM32F4 clock driver Daniel Thompson
2015-06-10 20:09 ` Daniel Thompson
2015-07-07 9:38 ` Maxime Coquelin
2015-07-07 9:38 ` Maxime Coquelin
2015-07-07 9:38 ` Maxime Coquelin
2015-06-22 22:48 ` [PATCH v3 0/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices Stephen Boyd
2015-06-22 22:48 ` Stephen Boyd
2015-06-22 22:48 ` Stephen Boyd
2015-06-22 22:48 ` Stephen Boyd
2015-06-23 8:22 ` Daniel Thompson [this message]
2015-06-23 8:22 ` Daniel Thompson
2015-06-23 8:22 ` Daniel Thompson
2015-06-23 9:24 ` Maxime Coquelin
2015-06-23 9:24 ` Maxime Coquelin
2015-06-23 9:24 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55891729.7070809@linaro.org \
--to=daniel.thompson@linaro.org \
--cc=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@linaro.org \
--cc=patches@linaro.org \
--cc=pawel.moll@arm.com \
--cc=rev13@wp.pl \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.