* [meta-fsl-arm][PATCH v5] 3.14.38-6QP_Beta release
@ 2015-07-30 19:18 Yuqing Zhu
2015-07-30 19:18 ` [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration Yuqing Zhu
0 siblings, 1 reply; 9+ messages in thread
From: Yuqing Zhu @ 2015-07-30 19:18 UTC (permalink / raw)
To: meta-freescale
Add PulseAudio configuration
Yuqing Zhu (1):
pulseaudio: Add PulseAudio configuration
.../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
.../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
.../pulseaudio/pulseaudio_%.bbappend | 20 +++
3 files changed, 277 insertions(+)
create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/default.pa
--
1.9.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
2015-07-30 19:18 [meta-fsl-arm][PATCH v5] 3.14.38-6QP_Beta release Yuqing Zhu
@ 2015-07-30 19:18 ` Yuqing Zhu
2015-08-05 18:39 ` Carlos Rafael Giani
2015-08-05 18:46 ` Carlos Rafael Giani
0 siblings, 2 replies; 9+ messages in thread
From: Yuqing Zhu @ 2015-07-30 19:18 UTC (permalink / raw)
To: meta-freescale
Set ffmpeg as resample method
Set exit idle time as -1 to force it not to exit
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
---
.../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
.../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
.../pulseaudio/pulseaudio_%.bbappend | 20 +++
3 files changed, 277 insertions(+)
create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/default.pa
diff --git a/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
new file mode 100644
index 0000000..54854eb
--- /dev/null
+++ b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
@@ -0,0 +1,87 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out. Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+; system-instance = no
+; local-server-type = user
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+exit-idle-time = -1
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+resample-method = ffmpeg
+; enable-remixing = yes
+; enable-lfe-remixing = no
+
+flat-volumes = no
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 1000000
+
+; default-sample-format = s16le
+; default-sample-rate = 44100
+; alternate-sample-rate = 48000
+; default-sample-channels = 2
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0
diff --git a/recipes-multimedia/pulseaudio/pulseaudio/default.pa b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
new file mode 100644
index 0000000..83a6ba8
--- /dev/null
+++ b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
@@ -0,0 +1,170 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+### Load something into the sample cache
+#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
+#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Should be after module-*-restore but before module-*-detect
+load-module module-switch-on-port-available
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect tsched=0
+.else
+### Use the static hardware detection module (for systems that lack udev support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect channels=2
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-policy.so
+load-module module-bluetooth-policy
+.endif
+
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+#load-module module-zeroconf-publish
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Load DBus protocol
+.ifexists module-dbus-protocol.so
+load-module module-dbus-protocol
+.endif
+
+# X11 modules should not be started from default.pa so that one daemon
+# can be shared by multiple sessions.
+
+### Load X11 bell module
+#load-module module-x11-bell sample=bell-windowing-system
+
+### Register ourselves in the X11 session manager
+#load-module module-x11-xsmp
+
+### Publish connection data in the X11 root window
+#.ifexists module-x11-publish.so
+#.nofail
+#load-module module-x11-publish
+#.fail
+#.endif
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input
diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
index b9acb36..95b955d 100644
--- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
+++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
@@ -1,4 +1,24 @@
CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+IMX_PATCHES = " file://daemon.conf \
+ file://default.pa \
+"
+SRC_URI_append_mx6 = "${IMX_PATCHES}"
+SRC_URI_append_mx7 = "${IMX_PATCHES}"
+
+do_install_append() {
+ install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
+ install -m 0644 ${WORKDIR}/default.pa ${D}${sysconfdir}/pulse/default.pa
+
+ #Fix me: Remove the kde desktop, because there are two destop in default
+ # (pulseaudio-kde.destop, pulseaudio.destop), then the pulseaudio server
+ # will be started twice, pulseaudio will have issue to switch to default input/output.
+ if [ -e ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop ]
+ then
+ rm ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop
+ fi
+}
+
PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
2015-07-30 19:18 ` [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration Yuqing Zhu
@ 2015-08-05 18:39 ` Carlos Rafael Giani
2015-08-05 18:46 ` Carlos Rafael Giani
1 sibling, 0 replies; 9+ messages in thread
From: Carlos Rafael Giani @ 2015-08-05 18:39 UTC (permalink / raw)
To: meta-freescale
Can you describe why you prefer the ffmpeg resampler over the speex ones
(which seem to be the default in most distros)?
Am 2015-07-30 um 21:18 schrieb Yuqing Zhu:
> Set ffmpeg as resample method
>
> Set exit idle time as -1 to force it not to exit
>
> Signed-off-by: Yuqing Zhu <b54851@freescale.com>
> ---
> .../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
> .../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
> .../pulseaudio/pulseaudio_%.bbappend | 20 +++
> 3 files changed, 277 insertions(+)
> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/default.pa
>
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> new file mode 100644
> index 0000000..54854eb
> --- /dev/null
> +++ b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> @@ -0,0 +1,87 @@
> +# This file is part of PulseAudio.
> +#
> +# PulseAudio is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU Lesser General Public License as published by
> +# the Free Software Foundation; either version 2 of the License, or
> +# (at your option) any later version.
> +#
> +# PulseAudio is distributed in the hope that it will be useful, but
> +# WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> +# General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public License
> +# along with PulseAudio; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
> +# USA.
> +
> +## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
> +## more information. Default values are commented out. Use either ; or # for
> +## commenting.
> +
> +; daemonize = no
> +; fail = yes
> +; allow-module-loading = yes
> +; allow-exit = yes
> +; use-pid-file = yes
> +; system-instance = no
> +; local-server-type = user
> +; enable-shm = yes
> +; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
> +; lock-memory = no
> +; cpu-limit = no
> +
> +; high-priority = yes
> +; nice-level = -11
> +
> +; realtime-scheduling = yes
> +; realtime-priority = 5
> +
> +exit-idle-time = -1
> +; scache-idle-time = 20
> +
> +; dl-search-path = (depends on architecture)
> +
> +; load-default-script-file = yes
> +; default-script-file = /etc/pulse/default.pa
> +
> +; log-target = auto
> +; log-level = notice
> +; log-meta = no
> +; log-time = no
> +; log-backtrace = 0
> +
> +resample-method = ffmpeg
> +; enable-remixing = yes
> +; enable-lfe-remixing = no
> +
> +flat-volumes = no
> +
> +; rlimit-fsize = -1
> +; rlimit-data = -1
> +; rlimit-stack = -1
> +; rlimit-core = -1
> +; rlimit-as = -1
> +; rlimit-rss = -1
> +; rlimit-nproc = -1
> +; rlimit-nofile = 256
> +; rlimit-memlock = -1
> +; rlimit-locks = -1
> +; rlimit-sigpending = -1
> +; rlimit-msgqueue = -1
> +; rlimit-nice = 31
> +; rlimit-rtprio = 9
> +; rlimit-rttime = 1000000
> +
> +; default-sample-format = s16le
> +; default-sample-rate = 44100
> +; alternate-sample-rate = 48000
> +; default-sample-channels = 2
> +; default-channel-map = front-left,front-right
> +
> +; default-fragments = 4
> +; default-fragment-size-msec = 25
> +
> +; enable-deferred-volume = yes
> +; deferred-volume-safety-margin-usec = 8000
> +; deferred-volume-extra-delay-usec = 0
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/default.pa b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
> new file mode 100644
> index 0000000..83a6ba8
> --- /dev/null
> +++ b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
> @@ -0,0 +1,170 @@
> +#!/usr/bin/pulseaudio -nF
> +#
> +# This file is part of PulseAudio.
> +#
> +# PulseAudio is free software; you can redistribute it and/or modify it
> +# under the terms of the GNU Lesser General Public License as published by
> +# the Free Software Foundation; either version 2 of the License, or
> +# (at your option) any later version.
> +#
> +# PulseAudio is distributed in the hope that it will be useful, but
> +# WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> +# General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public License
> +# along with PulseAudio; if not, write to the Free Software Foundation,
> +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
> +
> +# This startup script is used only if PulseAudio is started per-user
> +# (i.e. not in system mode)
> +
> +.nofail
> +
> +### Load something into the sample cache
> +#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
> +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
> +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
> +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
> +
> +.fail
> +
> +### Automatically restore the volume of streams and devices
> +load-module module-device-restore
> +load-module module-stream-restore
> +load-module module-card-restore
> +
> +### Automatically augment property information from .desktop files
> +### stored in /usr/share/application
> +load-module module-augment-properties
> +
> +### Should be after module-*-restore but before module-*-detect
> +load-module module-switch-on-port-available
> +
> +### Load audio drivers statically
> +### (it's probably better to not load these drivers manually, but instead
> +### use module-udev-detect -- see below -- for doing this automatically)
> +#load-module module-alsa-sink
> +#load-module module-alsa-source device=hw:1,0
> +#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
> +#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
> +#load-module module-null-sink
> +#load-module module-pipe-sink
> +
> +### Automatically load driver modules depending on the hardware available
> +.ifexists module-udev-detect.so
> +load-module module-udev-detect tsched=0
> +.else
> +### Use the static hardware detection module (for systems that lack udev support)
> +load-module module-detect
> +.endif
> +
> +### Automatically connect sink and source if JACK server is present
> +.ifexists module-jackdbus-detect.so
> +.nofail
> +load-module module-jackdbus-detect channels=2
> +.fail
> +.endif
> +
> +### Automatically load driver modules for Bluetooth hardware
> +.ifexists module-bluetooth-policy.so
> +load-module module-bluetooth-policy
> +.endif
> +
> +.ifexists module-bluetooth-discover.so
> +load-module module-bluetooth-discover
> +.endif
> +
> +### Load several protocols
> +.ifexists module-esound-protocol-unix.so
> +load-module module-esound-protocol-unix
> +.endif
> +load-module module-native-protocol-unix
> +
> +### Network access (may be configured with paprefs, so leave this commented
> +### here if you plan to use paprefs)
> +#load-module module-esound-protocol-tcp
> +#load-module module-native-protocol-tcp
> +#load-module module-zeroconf-publish
> +
> +### Load the RTP receiver module (also configured via paprefs, see above)
> +#load-module module-rtp-recv
> +
> +### Load the RTP sender module (also configured via paprefs, see above)
> +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
> +#load-module module-rtp-send source=rtp.monitor
> +
> +### Load additional modules from GConf settings. This can be configured with the paprefs tool.
> +### Please keep in mind that the modules configured by paprefs might conflict with manually
> +### loaded modules.
> +.ifexists module-gconf.so
> +.nofail
> +load-module module-gconf
> +.fail
> +.endif
> +
> +### Automatically restore the default sink/source when changed by the user
> +### during runtime
> +### NOTE: This should be loaded as early as possible so that subsequent modules
> +### that look up the default sink/source get the right value
> +load-module module-default-device-restore
> +
> +### Automatically move streams to the default sink if the sink they are
> +### connected to dies, similar for sources
> +load-module module-rescue-streams
> +
> +### Make sure we always have a sink around, even if it is a null sink.
> +load-module module-always-sink
> +
> +### Honour intended role device property
> +load-module module-intended-roles
> +
> +### Automatically suspend sinks/sources that become idle for too long
> +load-module module-suspend-on-idle
> +
> +### If autoexit on idle is enabled we want to make sure we only quit
> +### when no local session needs us anymore.
> +.ifexists module-console-kit.so
> +load-module module-console-kit
> +.endif
> +.ifexists module-systemd-login.so
> +load-module module-systemd-login
> +.endif
> +
> +### Enable positioned event sounds
> +load-module module-position-event-sounds
> +
> +### Cork music/video streams when a phone stream is active
> +load-module module-role-cork
> +
> +### Modules to allow autoloading of filters (such as echo cancellation)
> +### on demand. module-filter-heuristics tries to determine what filters
> +### make sense, and module-filter-apply does the heavy-lifting of
> +### loading modules and rerouting streams.
> +load-module module-filter-heuristics
> +load-module module-filter-apply
> +
> +### Load DBus protocol
> +.ifexists module-dbus-protocol.so
> +load-module module-dbus-protocol
> +.endif
> +
> +# X11 modules should not be started from default.pa so that one daemon
> +# can be shared by multiple sessions.
> +
> +### Load X11 bell module
> +#load-module module-x11-bell sample=bell-windowing-system
> +
> +### Register ourselves in the X11 session manager
> +#load-module module-x11-xsmp
> +
> +### Publish connection data in the X11 root window
> +#.ifexists module-x11-publish.so
> +#.nofail
> +#load-module module-x11-publish
> +#.fail
> +#.endif
> +
> +### Make some devices default
> +#set-default-sink output
> +#set-default-source input
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> index b9acb36..95b955d 100644
> --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> @@ -1,4 +1,24 @@
>
> CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
>
> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +IMX_PATCHES = " file://daemon.conf \
> + file://default.pa \
> +"
> +SRC_URI_append_mx6 = "${IMX_PATCHES}"
> +SRC_URI_append_mx7 = "${IMX_PATCHES}"
> +
> +do_install_append() {
> + install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
> + install -m 0644 ${WORKDIR}/default.pa ${D}${sysconfdir}/pulse/default.pa
> +
> + #Fix me: Remove the kde desktop, because there are two destop in default
> + # (pulseaudio-kde.destop, pulseaudio.destop), then the pulseaudio server
> + # will be started twice, pulseaudio will have issue to switch to default input/output.
> + if [ -e ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop ]
> + then
> + rm ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop
> + fi
> +}
> +
> PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
2015-07-30 19:18 ` [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration Yuqing Zhu
2015-08-05 18:39 ` Carlos Rafael Giani
@ 2015-08-05 18:46 ` Carlos Rafael Giani
2015-08-06 6:51 ` Zhu Carol
1 sibling, 1 reply; 9+ messages in thread
From: Carlos Rafael Giani @ 2015-08-05 18:46 UTC (permalink / raw)
To: meta-freescale
Regarding the exit-idle-time change, am I right to assume that this is a
workaround for the problem that otherwise, pulseaudio will quit after an
application stops using it? One link about this:
https://bbs.archlinux.org/viewtopic.php?id=92851
Am 2015-07-30 um 21:18 schrieb Yuqing Zhu:
> Set ffmpeg as resample method
>
> Set exit idle time as -1 to force it not to exit
>
> Signed-off-by: Yuqing Zhu <b54851@freescale.com>
> ---
> .../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
> .../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
> .../pulseaudio/pulseaudio_%.bbappend | 20 +++
> 3 files changed, 277 insertions(+)
> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/default.pa
>
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> new file mode 100644
> index 0000000..54854eb
> --- /dev/null
> +++ b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> @@ -0,0 +1,87 @@
> +# This file is part of PulseAudio.
> +#
> +# PulseAudio is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU Lesser General Public License as published by
> +# the Free Software Foundation; either version 2 of the License, or
> +# (at your option) any later version.
> +#
> +# PulseAudio is distributed in the hope that it will be useful, but
> +# WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> +# General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public License
> +# along with PulseAudio; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
> +# USA.
> +
> +## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
> +## more information. Default values are commented out. Use either ; or # for
> +## commenting.
> +
> +; daemonize = no
> +; fail = yes
> +; allow-module-loading = yes
> +; allow-exit = yes
> +; use-pid-file = yes
> +; system-instance = no
> +; local-server-type = user
> +; enable-shm = yes
> +; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
> +; lock-memory = no
> +; cpu-limit = no
> +
> +; high-priority = yes
> +; nice-level = -11
> +
> +; realtime-scheduling = yes
> +; realtime-priority = 5
> +
> +exit-idle-time = -1
> +; scache-idle-time = 20
> +
> +; dl-search-path = (depends on architecture)
> +
> +; load-default-script-file = yes
> +; default-script-file = /etc/pulse/default.pa
> +
> +; log-target = auto
> +; log-level = notice
> +; log-meta = no
> +; log-time = no
> +; log-backtrace = 0
> +
> +resample-method = ffmpeg
> +; enable-remixing = yes
> +; enable-lfe-remixing = no
> +
> +flat-volumes = no
> +
> +; rlimit-fsize = -1
> +; rlimit-data = -1
> +; rlimit-stack = -1
> +; rlimit-core = -1
> +; rlimit-as = -1
> +; rlimit-rss = -1
> +; rlimit-nproc = -1
> +; rlimit-nofile = 256
> +; rlimit-memlock = -1
> +; rlimit-locks = -1
> +; rlimit-sigpending = -1
> +; rlimit-msgqueue = -1
> +; rlimit-nice = 31
> +; rlimit-rtprio = 9
> +; rlimit-rttime = 1000000
> +
> +; default-sample-format = s16le
> +; default-sample-rate = 44100
> +; alternate-sample-rate = 48000
> +; default-sample-channels = 2
> +; default-channel-map = front-left,front-right
> +
> +; default-fragments = 4
> +; default-fragment-size-msec = 25
> +
> +; enable-deferred-volume = yes
> +; deferred-volume-safety-margin-usec = 8000
> +; deferred-volume-extra-delay-usec = 0
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/default.pa b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
> new file mode 100644
> index 0000000..83a6ba8
> --- /dev/null
> +++ b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
> @@ -0,0 +1,170 @@
> +#!/usr/bin/pulseaudio -nF
> +#
> +# This file is part of PulseAudio.
> +#
> +# PulseAudio is free software; you can redistribute it and/or modify it
> +# under the terms of the GNU Lesser General Public License as published by
> +# the Free Software Foundation; either version 2 of the License, or
> +# (at your option) any later version.
> +#
> +# PulseAudio is distributed in the hope that it will be useful, but
> +# WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> +# General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public License
> +# along with PulseAudio; if not, write to the Free Software Foundation,
> +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
> +
> +# This startup script is used only if PulseAudio is started per-user
> +# (i.e. not in system mode)
> +
> +.nofail
> +
> +### Load something into the sample cache
> +#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
> +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
> +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
> +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
> +
> +.fail
> +
> +### Automatically restore the volume of streams and devices
> +load-module module-device-restore
> +load-module module-stream-restore
> +load-module module-card-restore
> +
> +### Automatically augment property information from .desktop files
> +### stored in /usr/share/application
> +load-module module-augment-properties
> +
> +### Should be after module-*-restore but before module-*-detect
> +load-module module-switch-on-port-available
> +
> +### Load audio drivers statically
> +### (it's probably better to not load these drivers manually, but instead
> +### use module-udev-detect -- see below -- for doing this automatically)
> +#load-module module-alsa-sink
> +#load-module module-alsa-source device=hw:1,0
> +#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
> +#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
> +#load-module module-null-sink
> +#load-module module-pipe-sink
> +
> +### Automatically load driver modules depending on the hardware available
> +.ifexists module-udev-detect.so
> +load-module module-udev-detect tsched=0
> +.else
> +### Use the static hardware detection module (for systems that lack udev support)
> +load-module module-detect
> +.endif
> +
> +### Automatically connect sink and source if JACK server is present
> +.ifexists module-jackdbus-detect.so
> +.nofail
> +load-module module-jackdbus-detect channels=2
> +.fail
> +.endif
> +
> +### Automatically load driver modules for Bluetooth hardware
> +.ifexists module-bluetooth-policy.so
> +load-module module-bluetooth-policy
> +.endif
> +
> +.ifexists module-bluetooth-discover.so
> +load-module module-bluetooth-discover
> +.endif
> +
> +### Load several protocols
> +.ifexists module-esound-protocol-unix.so
> +load-module module-esound-protocol-unix
> +.endif
> +load-module module-native-protocol-unix
> +
> +### Network access (may be configured with paprefs, so leave this commented
> +### here if you plan to use paprefs)
> +#load-module module-esound-protocol-tcp
> +#load-module module-native-protocol-tcp
> +#load-module module-zeroconf-publish
> +
> +### Load the RTP receiver module (also configured via paprefs, see above)
> +#load-module module-rtp-recv
> +
> +### Load the RTP sender module (also configured via paprefs, see above)
> +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
> +#load-module module-rtp-send source=rtp.monitor
> +
> +### Load additional modules from GConf settings. This can be configured with the paprefs tool.
> +### Please keep in mind that the modules configured by paprefs might conflict with manually
> +### loaded modules.
> +.ifexists module-gconf.so
> +.nofail
> +load-module module-gconf
> +.fail
> +.endif
> +
> +### Automatically restore the default sink/source when changed by the user
> +### during runtime
> +### NOTE: This should be loaded as early as possible so that subsequent modules
> +### that look up the default sink/source get the right value
> +load-module module-default-device-restore
> +
> +### Automatically move streams to the default sink if the sink they are
> +### connected to dies, similar for sources
> +load-module module-rescue-streams
> +
> +### Make sure we always have a sink around, even if it is a null sink.
> +load-module module-always-sink
> +
> +### Honour intended role device property
> +load-module module-intended-roles
> +
> +### Automatically suspend sinks/sources that become idle for too long
> +load-module module-suspend-on-idle
> +
> +### If autoexit on idle is enabled we want to make sure we only quit
> +### when no local session needs us anymore.
> +.ifexists module-console-kit.so
> +load-module module-console-kit
> +.endif
> +.ifexists module-systemd-login.so
> +load-module module-systemd-login
> +.endif
> +
> +### Enable positioned event sounds
> +load-module module-position-event-sounds
> +
> +### Cork music/video streams when a phone stream is active
> +load-module module-role-cork
> +
> +### Modules to allow autoloading of filters (such as echo cancellation)
> +### on demand. module-filter-heuristics tries to determine what filters
> +### make sense, and module-filter-apply does the heavy-lifting of
> +### loading modules and rerouting streams.
> +load-module module-filter-heuristics
> +load-module module-filter-apply
> +
> +### Load DBus protocol
> +.ifexists module-dbus-protocol.so
> +load-module module-dbus-protocol
> +.endif
> +
> +# X11 modules should not be started from default.pa so that one daemon
> +# can be shared by multiple sessions.
> +
> +### Load X11 bell module
> +#load-module module-x11-bell sample=bell-windowing-system
> +
> +### Register ourselves in the X11 session manager
> +#load-module module-x11-xsmp
> +
> +### Publish connection data in the X11 root window
> +#.ifexists module-x11-publish.so
> +#.nofail
> +#load-module module-x11-publish
> +#.fail
> +#.endif
> +
> +### Make some devices default
> +#set-default-sink output
> +#set-default-source input
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> index b9acb36..95b955d 100644
> --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> @@ -1,4 +1,24 @@
>
> CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
>
> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +IMX_PATCHES = " file://daemon.conf \
> + file://default.pa \
> +"
> +SRC_URI_append_mx6 = "${IMX_PATCHES}"
> +SRC_URI_append_mx7 = "${IMX_PATCHES}"
> +
> +do_install_append() {
> + install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
> + install -m 0644 ${WORKDIR}/default.pa ${D}${sysconfdir}/pulse/default.pa
> +
> + #Fix me: Remove the kde desktop, because there are two destop in default
> + # (pulseaudio-kde.destop, pulseaudio.destop), then the pulseaudio server
> + # will be started twice, pulseaudio will have issue to switch to default input/output.
> + if [ -e ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop ]
> + then
> + rm ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop
> + fi
> +}
> +
> PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
2015-08-05 18:46 ` Carlos Rafael Giani
@ 2015-08-06 6:51 ` Zhu Carol
2015-08-06 6:53 ` Carlos Rafael Giani
0 siblings, 1 reply; 9+ messages in thread
From: Zhu Carol @ 2015-08-06 6:51 UTC (permalink / raw)
To: Carlos Rafael Giani, meta-freescale
Hi Carlos,
Yes, it's a workaround to force pulseaudio not to exit.
B.R.
Yuqing Zhu
-----Original Message-----
From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Carlos Rafael Giani
Sent: Thursday, August 06, 2015 2:46 AM
To: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
Regarding the exit-idle-time change, am I right to assume that this is a workaround for the problem that otherwise, pulseaudio will quit after an application stops using it? One link about this:
https://bbs.archlinux.org/viewtopic.php?id=92851
Am 2015-07-30 um 21:18 schrieb Yuqing Zhu:
> Set ffmpeg as resample method
>
> Set exit idle time as -1 to force it not to exit
>
> Signed-off-by: Yuqing Zhu <b54851@freescale.com>
> ---
> .../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
> .../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
> .../pulseaudio/pulseaudio_%.bbappend | 20 +++
> 3 files changed, 277 insertions(+)
> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> create mode 100644
> recipes-multimedia/pulseaudio/pulseaudio/default.pa
>
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> new file mode 100644
> index 0000000..54854eb
> --- /dev/null
> +++ b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
> @@ -0,0 +1,87 @@
> +# This file is part of PulseAudio.
> +#
> +# PulseAudio is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU Lesser General Public License as
> +published by # the Free Software Foundation; either version 2 of the
> +License, or # (at your option) any later version.
> +#
> +# PulseAudio is distributed in the hope that it will be useful, but #
> +WITHOUT ANY WARRANTY; without even the implied warranty of #
> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
> +General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public
> +License # along with PulseAudio; if not, write to the Free Software #
> +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 #
> +USA.
> +
> +## Configuration file for the PulseAudio daemon. See
> +pulse-daemon.conf(5) for ## more information. Default values are
> +commented out. Use either ; or # for ## commenting.
> +
> +; daemonize = no
> +; fail = yes
> +; allow-module-loading = yes
> +; allow-exit = yes
> +; use-pid-file = yes
> +; system-instance = no
> +; local-server-type = user
> +; enable-shm = yes
> +; shm-size-bytes = 0 # setting this 0 will use the system-default,
> +usually 64 MiB ; lock-memory = no ; cpu-limit = no
> +
> +; high-priority = yes
> +; nice-level = -11
> +
> +; realtime-scheduling = yes
> +; realtime-priority = 5
> +
> +exit-idle-time = -1
> +; scache-idle-time = 20
> +
> +; dl-search-path = (depends on architecture)
> +
> +; load-default-script-file = yes
> +; default-script-file = /etc/pulse/default.pa
> +
> +; log-target = auto
> +; log-level = notice
> +; log-meta = no
> +; log-time = no
> +; log-backtrace = 0
> +
> +resample-method = ffmpeg
> +; enable-remixing = yes
> +; enable-lfe-remixing = no
> +
> +flat-volumes = no
> +
> +; rlimit-fsize = -1
> +; rlimit-data = -1
> +; rlimit-stack = -1
> +; rlimit-core = -1
> +; rlimit-as = -1
> +; rlimit-rss = -1
> +; rlimit-nproc = -1
> +; rlimit-nofile = 256
> +; rlimit-memlock = -1
> +; rlimit-locks = -1
> +; rlimit-sigpending = -1
> +; rlimit-msgqueue = -1
> +; rlimit-nice = 31
> +; rlimit-rtprio = 9
> +; rlimit-rttime = 1000000
> +
> +; default-sample-format = s16le
> +; default-sample-rate = 44100
> +; alternate-sample-rate = 48000
> +; default-sample-channels = 2
> +; default-channel-map = front-left,front-right
> +
> +; default-fragments = 4
> +; default-fragment-size-msec = 25
> +
> +; enable-deferred-volume = yes
> +; deferred-volume-safety-margin-usec = 8000 ;
> +deferred-volume-extra-delay-usec = 0
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/default.pa
> b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
> new file mode 100644
> index 0000000..83a6ba8
> --- /dev/null
> +++ b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
> @@ -0,0 +1,170 @@
> +#!/usr/bin/pulseaudio -nF
> +#
> +# This file is part of PulseAudio.
> +#
> +# PulseAudio is free software; you can redistribute it and/or modify
> +it # under the terms of the GNU Lesser General Public License as
> +published by # the Free Software Foundation; either version 2 of the
> +License, or # (at your option) any later version.
> +#
> +# PulseAudio is distributed in the hope that it will be useful, but #
> +WITHOUT ANY WARRANTY; without even the implied warranty of #
> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
> +General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public
> +License # along with PulseAudio; if not, write to the Free Software
> +Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
> +
> +# This startup script is used only if PulseAudio is started per-user
> +# (i.e. not in system mode)
> +
> +.nofail
> +
> +### Load something into the sample cache #load-sample-lazy x11-bell
> +/usr/share/sounds/gtk-events/activate.wav
> +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
> +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
> +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
> +
> +.fail
> +
> +### Automatically restore the volume of streams and devices
> +load-module module-device-restore load-module module-stream-restore
> +load-module module-card-restore
> +
> +### Automatically augment property information from .desktop files
> +### stored in /usr/share/application load-module
> +module-augment-properties
> +
> +### Should be after module-*-restore but before module-*-detect
> +load-module module-switch-on-port-available
> +
> +### Load audio drivers statically
> +### (it's probably better to not load these drivers manually, but
> +instead ### use module-udev-detect -- see below -- for doing this
> +automatically) #load-module module-alsa-sink #load-module
> +module-alsa-source device=hw:1,0 #load-module module-oss
> +device="/dev/dsp" sink_name=output source_name=input #load-module
> +module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
> +#load-module module-null-sink #load-module module-pipe-sink
> +
> +### Automatically load driver modules depending on the hardware
> +available .ifexists module-udev-detect.so load-module
> +module-udev-detect tsched=0 .else ### Use the static hardware
> +detection module (for systems that lack udev support) load-module
> +module-detect .endif
> +
> +### Automatically connect sink and source if JACK server is present
> +.ifexists module-jackdbus-detect.so .nofail load-module
> +module-jackdbus-detect channels=2 .fail .endif
> +
> +### Automatically load driver modules for Bluetooth hardware
> +.ifexists module-bluetooth-policy.so load-module
> +module-bluetooth-policy .endif
> +
> +.ifexists module-bluetooth-discover.so load-module
> +module-bluetooth-discover .endif
> +
> +### Load several protocols
> +.ifexists module-esound-protocol-unix.so load-module
> +module-esound-protocol-unix .endif load-module
> +module-native-protocol-unix
> +
> +### Network access (may be configured with paprefs, so leave this
> +commented ### here if you plan to use paprefs) #load-module
> +module-esound-protocol-tcp #load-module module-native-protocol-tcp
> +#load-module module-zeroconf-publish
> +
> +### Load the RTP receiver module (also configured via paprefs, see
> +above) #load-module module-rtp-recv
> +
> +### Load the RTP sender module (also configured via paprefs, see
> +above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
> +#load-module module-rtp-send source=rtp.monitor
> +
> +### Load additional modules from GConf settings. This can be configured with the paprefs tool.
> +### Please keep in mind that the modules configured by paprefs might
> +conflict with manually ### loaded modules.
> +.ifexists module-gconf.so
> +.nofail
> +load-module module-gconf
> +.fail
> +.endif
> +
> +### Automatically restore the default sink/source when changed by the
> +user ### during runtime ### NOTE: This should be loaded as early as
> +possible so that subsequent modules ### that look up the default
> +sink/source get the right value load-module
> +module-default-device-restore
> +
> +### Automatically move streams to the default sink if the sink they
> +are ### connected to dies, similar for sources load-module
> +module-rescue-streams
> +
> +### Make sure we always have a sink around, even if it is a null sink.
> +load-module module-always-sink
> +
> +### Honour intended role device property load-module
> +module-intended-roles
> +
> +### Automatically suspend sinks/sources that become idle for too long
> +load-module module-suspend-on-idle
> +
> +### If autoexit on idle is enabled we want to make sure we only quit
> +### when no local session needs us anymore.
> +.ifexists module-console-kit.so
> +load-module module-console-kit
> +.endif
> +.ifexists module-systemd-login.so
> +load-module module-systemd-login
> +.endif
> +
> +### Enable positioned event sounds
> +load-module module-position-event-sounds
> +
> +### Cork music/video streams when a phone stream is active
> +load-module module-role-cork
> +
> +### Modules to allow autoloading of filters (such as echo
> +cancellation) ### on demand. module-filter-heuristics tries to
> +determine what filters ### make sense, and module-filter-apply does
> +the heavy-lifting of ### loading modules and rerouting streams.
> +load-module module-filter-heuristics
> +load-module module-filter-apply
> +
> +### Load DBus protocol
> +.ifexists module-dbus-protocol.so
> +load-module module-dbus-protocol
> +.endif
> +
> +# X11 modules should not be started from default.pa so that one
> +daemon # can be shared by multiple sessions.
> +
> +### Load X11 bell module
> +#load-module module-x11-bell sample=bell-windowing-system
> +
> +### Register ourselves in the X11 session manager #load-module
> +module-x11-xsmp
> +
> +### Publish connection data in the X11 root window #.ifexists
> +module-x11-publish.so #.nofail #load-module module-x11-publish #.fail
> +#.endif
> +
> +### Make some devices default
> +#set-default-sink output
> +#set-default-source input
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> index b9acb36..95b955d 100644
> --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> @@ -1,4 +1,24 @@
>
> CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
>
> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +IMX_PATCHES = " file://daemon.conf \
> + file://default.pa \
> +"
> +SRC_URI_append_mx6 = "${IMX_PATCHES}"
> +SRC_URI_append_mx7 = "${IMX_PATCHES}"
> +
> +do_install_append() {
> + install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
> + install -m 0644 ${WORKDIR}/default.pa
> +${D}${sysconfdir}/pulse/default.pa
> +
> + #Fix me: Remove the kde desktop, because there are two destop in default
> + # (pulseaudio-kde.destop, pulseaudio.destop), then the pulseaudio server
> + # will be started twice, pulseaudio will have issue to switch to default input/output.
> + if [ -e ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop ]
> + then
> + rm ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop
> + fi
> +}
> +
> PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
--
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
2015-08-06 6:51 ` Zhu Carol
@ 2015-08-06 6:53 ` Carlos Rafael Giani
2015-08-06 8:43 ` Zhu Carol
0 siblings, 1 reply; 9+ messages in thread
From: Carlos Rafael Giani @ 2015-08-06 6:53 UTC (permalink / raw)
To: Zhu Carol, meta-freescale
Right, ok. Its just minor, but rephrase it please to say: "Normally,
PulseAudio exits after an application finishes using it. Set
exit-idle-time to -1 in the daemon.conf to force PulseAudio to not exit
then."
Its a lot clearer :)
Am 2015-08-06 um 08:51 schrieb Zhu Carol:
> Hi Carlos,
>
> Yes, it's a workaround to force pulseaudio not to exit.
>
> B.R.
> Yuqing Zhu
>
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Carlos Rafael Giani
> Sent: Thursday, August 06, 2015 2:46 AM
> To: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
>
> Regarding the exit-idle-time change, am I right to assume that this is a workaround for the problem that otherwise, pulseaudio will quit after an application stops using it? One link about this:
> https://bbs.archlinux.org/viewtopic.php?id=92851
>
> Am 2015-07-30 um 21:18 schrieb Yuqing Zhu:
>> Set ffmpeg as resample method
>>
>> Set exit idle time as -1 to force it not to exit
>>
>> Signed-off-by: Yuqing Zhu <b54851@freescale.com>
>> ---
>> .../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
>> .../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
>> .../pulseaudio/pulseaudio_%.bbappend | 20 +++
>> 3 files changed, 277 insertions(+)
>> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> create mode 100644
>> recipes-multimedia/pulseaudio/pulseaudio/default.pa
>>
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> new file mode 100644
>> index 0000000..54854eb
>> --- /dev/null
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> @@ -0,0 +1,87 @@
>> +# This file is part of PulseAudio.
>> +#
>> +# PulseAudio is free software; you can redistribute it and/or modify
>> +# it under the terms of the GNU Lesser General Public License as
>> +published by # the Free Software Foundation; either version 2 of the
>> +License, or # (at your option) any later version.
>> +#
>> +# PulseAudio is distributed in the hope that it will be useful, but #
>> +WITHOUT ANY WARRANTY; without even the implied warranty of #
>> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
>> +General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU Lesser General Public
>> +License # along with PulseAudio; if not, write to the Free Software #
>> +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 #
>> +USA.
>> +
>> +## Configuration file for the PulseAudio daemon. See
>> +pulse-daemon.conf(5) for ## more information. Default values are
>> +commented out. Use either ; or # for ## commenting.
>> +
>> +; daemonize = no
>> +; fail = yes
>> +; allow-module-loading = yes
>> +; allow-exit = yes
>> +; use-pid-file = yes
>> +; system-instance = no
>> +; local-server-type = user
>> +; enable-shm = yes
>> +; shm-size-bytes = 0 # setting this 0 will use the system-default,
>> +usually 64 MiB ; lock-memory = no ; cpu-limit = no
>> +
>> +; high-priority = yes
>> +; nice-level = -11
>> +
>> +; realtime-scheduling = yes
>> +; realtime-priority = 5
>> +
>> +exit-idle-time = -1
>> +; scache-idle-time = 20
>> +
>> +; dl-search-path = (depends on architecture)
>> +
>> +; load-default-script-file = yes
>> +; default-script-file = /etc/pulse/default.pa
>> +
>> +; log-target = auto
>> +; log-level = notice
>> +; log-meta = no
>> +; log-time = no
>> +; log-backtrace = 0
>> +
>> +resample-method = ffmpeg
>> +; enable-remixing = yes
>> +; enable-lfe-remixing = no
>> +
>> +flat-volumes = no
>> +
>> +; rlimit-fsize = -1
>> +; rlimit-data = -1
>> +; rlimit-stack = -1
>> +; rlimit-core = -1
>> +; rlimit-as = -1
>> +; rlimit-rss = -1
>> +; rlimit-nproc = -1
>> +; rlimit-nofile = 256
>> +; rlimit-memlock = -1
>> +; rlimit-locks = -1
>> +; rlimit-sigpending = -1
>> +; rlimit-msgqueue = -1
>> +; rlimit-nice = 31
>> +; rlimit-rtprio = 9
>> +; rlimit-rttime = 1000000
>> +
>> +; default-sample-format = s16le
>> +; default-sample-rate = 44100
>> +; alternate-sample-rate = 48000
>> +; default-sample-channels = 2
>> +; default-channel-map = front-left,front-right
>> +
>> +; default-fragments = 4
>> +; default-fragment-size-msec = 25
>> +
>> +; enable-deferred-volume = yes
>> +; deferred-volume-safety-margin-usec = 8000 ;
>> +deferred-volume-extra-delay-usec = 0
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> new file mode 100644
>> index 0000000..83a6ba8
>> --- /dev/null
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> @@ -0,0 +1,170 @@
>> +#!/usr/bin/pulseaudio -nF
>> +#
>> +# This file is part of PulseAudio.
>> +#
>> +# PulseAudio is free software; you can redistribute it and/or modify
>> +it # under the terms of the GNU Lesser General Public License as
>> +published by # the Free Software Foundation; either version 2 of the
>> +License, or # (at your option) any later version.
>> +#
>> +# PulseAudio is distributed in the hope that it will be useful, but #
>> +WITHOUT ANY WARRANTY; without even the implied warranty of #
>> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
>> +General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU Lesser General Public
>> +License # along with PulseAudio; if not, write to the Free Software
>> +Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
>> +
>> +# This startup script is used only if PulseAudio is started per-user
>> +# (i.e. not in system mode)
>> +
>> +.nofail
>> +
>> +### Load something into the sample cache #load-sample-lazy x11-bell
>> +/usr/share/sounds/gtk-events/activate.wav
>> +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
>> +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
>> +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
>> +
>> +.fail
>> +
>> +### Automatically restore the volume of streams and devices
>> +load-module module-device-restore load-module module-stream-restore
>> +load-module module-card-restore
>> +
>> +### Automatically augment property information from .desktop files
>> +### stored in /usr/share/application load-module
>> +module-augment-properties
>> +
>> +### Should be after module-*-restore but before module-*-detect
>> +load-module module-switch-on-port-available
>> +
>> +### Load audio drivers statically
>> +### (it's probably better to not load these drivers manually, but
>> +instead ### use module-udev-detect -- see below -- for doing this
>> +automatically) #load-module module-alsa-sink #load-module
>> +module-alsa-source device=hw:1,0 #load-module module-oss
>> +device="/dev/dsp" sink_name=output source_name=input #load-module
>> +module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
>> +#load-module module-null-sink #load-module module-pipe-sink
>> +
>> +### Automatically load driver modules depending on the hardware
>> +available .ifexists module-udev-detect.so load-module
>> +module-udev-detect tsched=0 .else ### Use the static hardware
>> +detection module (for systems that lack udev support) load-module
>> +module-detect .endif
>> +
>> +### Automatically connect sink and source if JACK server is present
>> +.ifexists module-jackdbus-detect.so .nofail load-module
>> +module-jackdbus-detect channels=2 .fail .endif
>> +
>> +### Automatically load driver modules for Bluetooth hardware
>> +.ifexists module-bluetooth-policy.so load-module
>> +module-bluetooth-policy .endif
>> +
>> +.ifexists module-bluetooth-discover.so load-module
>> +module-bluetooth-discover .endif
>> +
>> +### Load several protocols
>> +.ifexists module-esound-protocol-unix.so load-module
>> +module-esound-protocol-unix .endif load-module
>> +module-native-protocol-unix
>> +
>> +### Network access (may be configured with paprefs, so leave this
>> +commented ### here if you plan to use paprefs) #load-module
>> +module-esound-protocol-tcp #load-module module-native-protocol-tcp
>> +#load-module module-zeroconf-publish
>> +
>> +### Load the RTP receiver module (also configured via paprefs, see
>> +above) #load-module module-rtp-recv
>> +
>> +### Load the RTP sender module (also configured via paprefs, see
>> +above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
>> +#load-module module-rtp-send source=rtp.monitor
>> +
>> +### Load additional modules from GConf settings. This can be configured with the paprefs tool.
>> +### Please keep in mind that the modules configured by paprefs might
>> +conflict with manually ### loaded modules.
>> +.ifexists module-gconf.so
>> +.nofail
>> +load-module module-gconf
>> +.fail
>> +.endif
>> +
>> +### Automatically restore the default sink/source when changed by the
>> +user ### during runtime ### NOTE: This should be loaded as early as
>> +possible so that subsequent modules ### that look up the default
>> +sink/source get the right value load-module
>> +module-default-device-restore
>> +
>> +### Automatically move streams to the default sink if the sink they
>> +are ### connected to dies, similar for sources load-module
>> +module-rescue-streams
>> +
>> +### Make sure we always have a sink around, even if it is a null sink.
>> +load-module module-always-sink
>> +
>> +### Honour intended role device property load-module
>> +module-intended-roles
>> +
>> +### Automatically suspend sinks/sources that become idle for too long
>> +load-module module-suspend-on-idle
>> +
>> +### If autoexit on idle is enabled we want to make sure we only quit
>> +### when no local session needs us anymore.
>> +.ifexists module-console-kit.so
>> +load-module module-console-kit
>> +.endif
>> +.ifexists module-systemd-login.so
>> +load-module module-systemd-login
>> +.endif
>> +
>> +### Enable positioned event sounds
>> +load-module module-position-event-sounds
>> +
>> +### Cork music/video streams when a phone stream is active
>> +load-module module-role-cork
>> +
>> +### Modules to allow autoloading of filters (such as echo
>> +cancellation) ### on demand. module-filter-heuristics tries to
>> +determine what filters ### make sense, and module-filter-apply does
>> +the heavy-lifting of ### loading modules and rerouting streams.
>> +load-module module-filter-heuristics
>> +load-module module-filter-apply
>> +
>> +### Load DBus protocol
>> +.ifexists module-dbus-protocol.so
>> +load-module module-dbus-protocol
>> +.endif
>> +
>> +# X11 modules should not be started from default.pa so that one
>> +daemon # can be shared by multiple sessions.
>> +
>> +### Load X11 bell module
>> +#load-module module-x11-bell sample=bell-windowing-system
>> +
>> +### Register ourselves in the X11 session manager #load-module
>> +module-x11-xsmp
>> +
>> +### Publish connection data in the X11 root window #.ifexists
>> +module-x11-publish.so #.nofail #load-module module-x11-publish #.fail
>> +#.endif
>> +
>> +### Make some devices default
>> +#set-default-sink output
>> +#set-default-source input
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> index b9acb36..95b955d 100644
>> --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> @@ -1,4 +1,24 @@
>>
>> CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
>>
>> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>> +IMX_PATCHES = " file://daemon.conf \
>> + file://default.pa \
>> +"
>> +SRC_URI_append_mx6 = "${IMX_PATCHES}"
>> +SRC_URI_append_mx7 = "${IMX_PATCHES}"
>> +
>> +do_install_append() {
>> + install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
>> + install -m 0644 ${WORKDIR}/default.pa
>> +${D}${sysconfdir}/pulse/default.pa
>> +
>> + #Fix me: Remove the kde desktop, because there are two destop in default
>> + # (pulseaudio-kde.destop, pulseaudio.destop), then the pulseaudio server
>> + # will be started twice, pulseaudio will have issue to switch to default input/output.
>> + if [ -e ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop ]
>> + then
>> + rm ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop
>> + fi
>> +}
>> +
>> PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
2015-08-06 6:53 ` Carlos Rafael Giani
@ 2015-08-06 8:43 ` Zhu Carol
2015-08-06 10:01 ` Zhu Carol
0 siblings, 1 reply; 9+ messages in thread
From: Zhu Carol @ 2015-08-06 8:43 UTC (permalink / raw)
To: Carlos Rafael Giani, meta-freescale
Ok, thanks for your helpful suggestion.
B.R.
Yuqing Zhu
-----Original Message-----
From: Carlos Rafael Giani [mailto:dv@pseudoterminal.org]
Sent: Thursday, August 06, 2015 2:54 PM
To: Zhu Yuqing-B54851; meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
Right, ok. Its just minor, but rephrase it please to say: "Normally, PulseAudio exits after an application finishes using it. Set exit-idle-time to -1 in the daemon.conf to force PulseAudio to not exit then."
Its a lot clearer :)
Am 2015-08-06 um 08:51 schrieb Zhu Carol:
> Hi Carlos,
>
> Yes, it's a workaround to force pulseaudio not to exit.
>
> B.R.
> Yuqing Zhu
>
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org
> [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Carlos
> Rafael Giani
> Sent: Thursday, August 06, 2015 2:46 AM
> To: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add
> PulseAudio configuration
>
> Regarding the exit-idle-time change, am I right to assume that this is a workaround for the problem that otherwise, pulseaudio will quit after an application stops using it? One link about this:
> https://bbs.archlinux.org/viewtopic.php?id=92851
>
> Am 2015-07-30 um 21:18 schrieb Yuqing Zhu:
>> Set ffmpeg as resample method
>>
>> Set exit idle time as -1 to force it not to exit
>>
>> Signed-off-by: Yuqing Zhu <b54851@freescale.com>
>> ---
>> .../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
>> .../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
>> .../pulseaudio/pulseaudio_%.bbappend | 20 +++
>> 3 files changed, 277 insertions(+)
>> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> create mode 100644
>> recipes-multimedia/pulseaudio/pulseaudio/default.pa
>>
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> new file mode 100644
>> index 0000000..54854eb
>> --- /dev/null
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> @@ -0,0 +1,87 @@
>> +# This file is part of PulseAudio.
>> +#
>> +# PulseAudio is free software; you can redistribute it and/or modify
>> +# it under the terms of the GNU Lesser General Public License as
>> +published by # the Free Software Foundation; either version 2 of the
>> +License, or # (at your option) any later version.
>> +#
>> +# PulseAudio is distributed in the hope that it will be useful, but
>> +# WITHOUT ANY WARRANTY; without even the implied warranty of #
>> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
>> +General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU Lesser General Public
>> +License # along with PulseAudio; if not, write to the Free Software
>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>> +02111-1307 # USA.
>> +
>> +## Configuration file for the PulseAudio daemon. See
>> +pulse-daemon.conf(5) for ## more information. Default values are
>> +commented out. Use either ; or # for ## commenting.
>> +
>> +; daemonize = no
>> +; fail = yes
>> +; allow-module-loading = yes
>> +; allow-exit = yes
>> +; use-pid-file = yes
>> +; system-instance = no
>> +; local-server-type = user
>> +; enable-shm = yes
>> +; shm-size-bytes = 0 # setting this 0 will use the system-default,
>> +usually 64 MiB ; lock-memory = no ; cpu-limit = no
>> +
>> +; high-priority = yes
>> +; nice-level = -11
>> +
>> +; realtime-scheduling = yes
>> +; realtime-priority = 5
>> +
>> +exit-idle-time = -1
>> +; scache-idle-time = 20
>> +
>> +; dl-search-path = (depends on architecture)
>> +
>> +; load-default-script-file = yes
>> +; default-script-file = /etc/pulse/default.pa
>> +
>> +; log-target = auto
>> +; log-level = notice
>> +; log-meta = no
>> +; log-time = no
>> +; log-backtrace = 0
>> +
>> +resample-method = ffmpeg
>> +; enable-remixing = yes
>> +; enable-lfe-remixing = no
>> +
>> +flat-volumes = no
>> +
>> +; rlimit-fsize = -1
>> +; rlimit-data = -1
>> +; rlimit-stack = -1
>> +; rlimit-core = -1
>> +; rlimit-as = -1
>> +; rlimit-rss = -1
>> +; rlimit-nproc = -1
>> +; rlimit-nofile = 256
>> +; rlimit-memlock = -1
>> +; rlimit-locks = -1
>> +; rlimit-sigpending = -1
>> +; rlimit-msgqueue = -1
>> +; rlimit-nice = 31
>> +; rlimit-rtprio = 9
>> +; rlimit-rttime = 1000000
>> +
>> +; default-sample-format = s16le
>> +; default-sample-rate = 44100
>> +; alternate-sample-rate = 48000
>> +; default-sample-channels = 2
>> +; default-channel-map = front-left,front-right
>> +
>> +; default-fragments = 4
>> +; default-fragment-size-msec = 25
>> +
>> +; enable-deferred-volume = yes
>> +; deferred-volume-safety-margin-usec = 8000 ;
>> +deferred-volume-extra-delay-usec = 0
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> new file mode 100644
>> index 0000000..83a6ba8
>> --- /dev/null
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> @@ -0,0 +1,170 @@
>> +#!/usr/bin/pulseaudio -nF
>> +#
>> +# This file is part of PulseAudio.
>> +#
>> +# PulseAudio is free software; you can redistribute it and/or modify
>> +it # under the terms of the GNU Lesser General Public License as
>> +published by # the Free Software Foundation; either version 2 of the
>> +License, or # (at your option) any later version.
>> +#
>> +# PulseAudio is distributed in the hope that it will be useful, but
>> +# WITHOUT ANY WARRANTY; without even the implied warranty of #
>> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
>> +General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU Lesser General Public
>> +License # along with PulseAudio; if not, write to the Free Software
>> +Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
>> +
>> +# This startup script is used only if PulseAudio is started per-user
>> +# (i.e. not in system mode)
>> +
>> +.nofail
>> +
>> +### Load something into the sample cache #load-sample-lazy x11-bell
>> +/usr/share/sounds/gtk-events/activate.wav
>> +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
>> +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
>> +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
>> +
>> +.fail
>> +
>> +### Automatically restore the volume of streams and devices
>> +load-module module-device-restore load-module module-stream-restore
>> +load-module module-card-restore
>> +
>> +### Automatically augment property information from .desktop files
>> +### stored in /usr/share/application load-module
>> +module-augment-properties
>> +
>> +### Should be after module-*-restore but before module-*-detect
>> +load-module module-switch-on-port-available
>> +
>> +### Load audio drivers statically
>> +### (it's probably better to not load these drivers manually, but
>> +instead ### use module-udev-detect -- see below -- for doing this
>> +automatically) #load-module module-alsa-sink #load-module
>> +module-alsa-source device=hw:1,0 #load-module module-oss
>> +device="/dev/dsp" sink_name=output source_name=input #load-module
>> +module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
>> +#load-module module-null-sink #load-module module-pipe-sink
>> +
>> +### Automatically load driver modules depending on the hardware
>> +available .ifexists module-udev-detect.so load-module
>> +module-udev-detect tsched=0 .else ### Use the static hardware
>> +detection module (for systems that lack udev support) load-module
>> +module-detect .endif
>> +
>> +### Automatically connect sink and source if JACK server is present
>> +.ifexists module-jackdbus-detect.so .nofail load-module
>> +module-jackdbus-detect channels=2 .fail .endif
>> +
>> +### Automatically load driver modules for Bluetooth hardware
>> +.ifexists module-bluetooth-policy.so load-module
>> +module-bluetooth-policy .endif
>> +
>> +.ifexists module-bluetooth-discover.so load-module
>> +module-bluetooth-discover .endif
>> +
>> +### Load several protocols
>> +.ifexists module-esound-protocol-unix.so load-module
>> +module-esound-protocol-unix .endif load-module
>> +module-native-protocol-unix
>> +
>> +### Network access (may be configured with paprefs, so leave this
>> +commented ### here if you plan to use paprefs) #load-module
>> +module-esound-protocol-tcp #load-module module-native-protocol-tcp
>> +#load-module module-zeroconf-publish
>> +
>> +### Load the RTP receiver module (also configured via paprefs, see
>> +above) #load-module module-rtp-recv
>> +
>> +### Load the RTP sender module (also configured via paprefs, see
>> +above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
>> +#load-module module-rtp-send source=rtp.monitor
>> +
>> +### Load additional modules from GConf settings. This can be configured with the paprefs tool.
>> +### Please keep in mind that the modules configured by paprefs might
>> +conflict with manually ### loaded modules.
>> +.ifexists module-gconf.so
>> +.nofail
>> +load-module module-gconf
>> +.fail
>> +.endif
>> +
>> +### Automatically restore the default sink/source when changed by
>> +the user ### during runtime ### NOTE: This should be loaded as early
>> +as possible so that subsequent modules ### that look up the default
>> +sink/source get the right value load-module
>> +module-default-device-restore
>> +
>> +### Automatically move streams to the default sink if the sink they
>> +are ### connected to dies, similar for sources load-module
>> +module-rescue-streams
>> +
>> +### Make sure we always have a sink around, even if it is a null sink.
>> +load-module module-always-sink
>> +
>> +### Honour intended role device property load-module
>> +module-intended-roles
>> +
>> +### Automatically suspend sinks/sources that become idle for too
>> +long load-module module-suspend-on-idle
>> +
>> +### If autoexit on idle is enabled we want to make sure we only quit
>> +### when no local session needs us anymore.
>> +.ifexists module-console-kit.so
>> +load-module module-console-kit
>> +.endif
>> +.ifexists module-systemd-login.so
>> +load-module module-systemd-login
>> +.endif
>> +
>> +### Enable positioned event sounds
>> +load-module module-position-event-sounds
>> +
>> +### Cork music/video streams when a phone stream is active
>> +load-module module-role-cork
>> +
>> +### Modules to allow autoloading of filters (such as echo
>> +cancellation) ### on demand. module-filter-heuristics tries to
>> +determine what filters ### make sense, and module-filter-apply does
>> +the heavy-lifting of ### loading modules and rerouting streams.
>> +load-module module-filter-heuristics load-module module-filter-apply
>> +
>> +### Load DBus protocol
>> +.ifexists module-dbus-protocol.so
>> +load-module module-dbus-protocol
>> +.endif
>> +
>> +# X11 modules should not be started from default.pa so that one
>> +daemon # can be shared by multiple sessions.
>> +
>> +### Load X11 bell module
>> +#load-module module-x11-bell sample=bell-windowing-system
>> +
>> +### Register ourselves in the X11 session manager #load-module
>> +module-x11-xsmp
>> +
>> +### Publish connection data in the X11 root window #.ifexists
>> +module-x11-publish.so #.nofail #load-module module-x11-publish
>> +#.fail #.endif
>> +
>> +### Make some devices default
>> +#set-default-sink output
>> +#set-default-source input
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> index b9acb36..95b955d 100644
>> --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> @@ -1,4 +1,24 @@
>>
>> CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
>>
>> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>> +IMX_PATCHES = " file://daemon.conf \
>> + file://default.pa \
>> +"
>> +SRC_URI_append_mx6 = "${IMX_PATCHES}"
>> +SRC_URI_append_mx7 = "${IMX_PATCHES}"
>> +
>> +do_install_append() {
>> + install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
>> + install -m 0644 ${WORKDIR}/default.pa
>> +${D}${sysconfdir}/pulse/default.pa
>> +
>> + #Fix me: Remove the kde desktop, because there are two destop in default
>> + # (pulseaudio-kde.destop, pulseaudio.destop), then the pulseaudio server
>> + # will be started twice, pulseaudio will have issue to switch to default input/output.
>> + if [ -e ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop ]
>> + then
>> + rm ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop
>> + fi
>> +}
>> +
>> PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
2015-08-06 8:43 ` Zhu Carol
@ 2015-08-06 10:01 ` Zhu Carol
2015-08-06 11:38 ` Carlos Rafael Giani
0 siblings, 1 reply; 9+ messages in thread
From: Zhu Carol @ 2015-08-06 10:01 UTC (permalink / raw)
To: Carlos Rafael Giani; +Cc: meta-freescale
And the reason why using ffmpeg resampler over the speex ones is that we need better quality audio.
B.R.
Yuqing
-----Original Message-----
From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Zhu Carol
Sent: Thursday, August 06, 2015 4:43 PM
To: Carlos Rafael Giani; meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
Ok, thanks for your helpful suggestion.
B.R.
Yuqing Zhu
-----Original Message-----
From: Carlos Rafael Giani [mailto:dv@pseudoterminal.org]
Sent: Thursday, August 06, 2015 2:54 PM
To: Zhu Yuqing-B54851; meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
Right, ok. Its just minor, but rephrase it please to say: "Normally, PulseAudio exits after an application finishes using it. Set exit-idle-time to -1 in the daemon.conf to force PulseAudio to not exit then."
Its a lot clearer :)
Am 2015-08-06 um 08:51 schrieb Zhu Carol:
> Hi Carlos,
>
> Yes, it's a workaround to force pulseaudio not to exit.
>
> B.R.
> Yuqing Zhu
>
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org
> [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Carlos
> Rafael Giani
> Sent: Thursday, August 06, 2015 2:46 AM
> To: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add
> PulseAudio configuration
>
> Regarding the exit-idle-time change, am I right to assume that this is a workaround for the problem that otherwise, pulseaudio will quit after an application stops using it? One link about this:
> https://bbs.archlinux.org/viewtopic.php?id=92851
>
> Am 2015-07-30 um 21:18 schrieb Yuqing Zhu:
>> Set ffmpeg as resample method
>>
>> Set exit idle time as -1 to force it not to exit
>>
>> Signed-off-by: Yuqing Zhu <b54851@freescale.com>
>> ---
>> .../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
>> .../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
>> .../pulseaudio/pulseaudio_%.bbappend | 20 +++
>> 3 files changed, 277 insertions(+)
>> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> create mode 100644
>> recipes-multimedia/pulseaudio/pulseaudio/default.pa
>>
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> new file mode 100644
>> index 0000000..54854eb
>> --- /dev/null
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>> @@ -0,0 +1,87 @@
>> +# This file is part of PulseAudio.
>> +#
>> +# PulseAudio is free software; you can redistribute it and/or modify
>> +# it under the terms of the GNU Lesser General Public License as
>> +published by # the Free Software Foundation; either version 2 of the
>> +License, or # (at your option) any later version.
>> +#
>> +# PulseAudio is distributed in the hope that it will be useful, but
>> +# WITHOUT ANY WARRANTY; without even the implied warranty of #
>> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
>> +General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU Lesser General Public
>> +License # along with PulseAudio; if not, write to the Free Software
>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>> +02111-1307 # USA.
>> +
>> +## Configuration file for the PulseAudio daemon. See
>> +pulse-daemon.conf(5) for ## more information. Default values are
>> +commented out. Use either ; or # for ## commenting.
>> +
>> +; daemonize = no
>> +; fail = yes
>> +; allow-module-loading = yes
>> +; allow-exit = yes
>> +; use-pid-file = yes
>> +; system-instance = no
>> +; local-server-type = user
>> +; enable-shm = yes
>> +; shm-size-bytes = 0 # setting this 0 will use the system-default,
>> +usually 64 MiB ; lock-memory = no ; cpu-limit = no
>> +
>> +; high-priority = yes
>> +; nice-level = -11
>> +
>> +; realtime-scheduling = yes
>> +; realtime-priority = 5
>> +
>> +exit-idle-time = -1
>> +; scache-idle-time = 20
>> +
>> +; dl-search-path = (depends on architecture)
>> +
>> +; load-default-script-file = yes
>> +; default-script-file = /etc/pulse/default.pa
>> +
>> +; log-target = auto
>> +; log-level = notice
>> +; log-meta = no
>> +; log-time = no
>> +; log-backtrace = 0
>> +
>> +resample-method = ffmpeg
>> +; enable-remixing = yes
>> +; enable-lfe-remixing = no
>> +
>> +flat-volumes = no
>> +
>> +; rlimit-fsize = -1
>> +; rlimit-data = -1
>> +; rlimit-stack = -1
>> +; rlimit-core = -1
>> +; rlimit-as = -1
>> +; rlimit-rss = -1
>> +; rlimit-nproc = -1
>> +; rlimit-nofile = 256
>> +; rlimit-memlock = -1
>> +; rlimit-locks = -1
>> +; rlimit-sigpending = -1
>> +; rlimit-msgqueue = -1
>> +; rlimit-nice = 31
>> +; rlimit-rtprio = 9
>> +; rlimit-rttime = 1000000
>> +
>> +; default-sample-format = s16le
>> +; default-sample-rate = 44100
>> +; alternate-sample-rate = 48000
>> +; default-sample-channels = 2
>> +; default-channel-map = front-left,front-right
>> +
>> +; default-fragments = 4
>> +; default-fragment-size-msec = 25
>> +
>> +; enable-deferred-volume = yes
>> +; deferred-volume-safety-margin-usec = 8000 ;
>> +deferred-volume-extra-delay-usec = 0
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> new file mode 100644
>> index 0000000..83a6ba8
>> --- /dev/null
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>> @@ -0,0 +1,170 @@
>> +#!/usr/bin/pulseaudio -nF
>> +#
>> +# This file is part of PulseAudio.
>> +#
>> +# PulseAudio is free software; you can redistribute it and/or modify
>> +it # under the terms of the GNU Lesser General Public License as
>> +published by # the Free Software Foundation; either version 2 of the
>> +License, or # (at your option) any later version.
>> +#
>> +# PulseAudio is distributed in the hope that it will be useful, but
>> +# WITHOUT ANY WARRANTY; without even the implied warranty of #
>> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
>> +General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU Lesser General Public
>> +License # along with PulseAudio; if not, write to the Free Software
>> +Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
>> +
>> +# This startup script is used only if PulseAudio is started per-user
>> +# (i.e. not in system mode)
>> +
>> +.nofail
>> +
>> +### Load something into the sample cache #load-sample-lazy x11-bell
>> +/usr/share/sounds/gtk-events/activate.wav
>> +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
>> +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
>> +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
>> +
>> +.fail
>> +
>> +### Automatically restore the volume of streams and devices
>> +load-module module-device-restore load-module module-stream-restore
>> +load-module module-card-restore
>> +
>> +### Automatically augment property information from .desktop files
>> +### stored in /usr/share/application load-module
>> +module-augment-properties
>> +
>> +### Should be after module-*-restore but before module-*-detect
>> +load-module module-switch-on-port-available
>> +
>> +### Load audio drivers statically
>> +### (it's probably better to not load these drivers manually, but
>> +instead ### use module-udev-detect -- see below -- for doing this
>> +automatically) #load-module module-alsa-sink #load-module
>> +module-alsa-source device=hw:1,0 #load-module module-oss
>> +device="/dev/dsp" sink_name=output source_name=input #load-module
>> +module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
>> +#load-module module-null-sink #load-module module-pipe-sink
>> +
>> +### Automatically load driver modules depending on the hardware
>> +available .ifexists module-udev-detect.so load-module
>> +module-udev-detect tsched=0 .else ### Use the static hardware
>> +detection module (for systems that lack udev support) load-module
>> +module-detect .endif
>> +
>> +### Automatically connect sink and source if JACK server is present
>> +.ifexists module-jackdbus-detect.so .nofail load-module
>> +module-jackdbus-detect channels=2 .fail .endif
>> +
>> +### Automatically load driver modules for Bluetooth hardware
>> +.ifexists module-bluetooth-policy.so load-module
>> +module-bluetooth-policy .endif
>> +
>> +.ifexists module-bluetooth-discover.so load-module
>> +module-bluetooth-discover .endif
>> +
>> +### Load several protocols
>> +.ifexists module-esound-protocol-unix.so load-module
>> +module-esound-protocol-unix .endif load-module
>> +module-native-protocol-unix
>> +
>> +### Network access (may be configured with paprefs, so leave this
>> +commented ### here if you plan to use paprefs) #load-module
>> +module-esound-protocol-tcp #load-module module-native-protocol-tcp
>> +#load-module module-zeroconf-publish
>> +
>> +### Load the RTP receiver module (also configured via paprefs, see
>> +above) #load-module module-rtp-recv
>> +
>> +### Load the RTP sender module (also configured via paprefs, see
>> +above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
>> +#load-module module-rtp-send source=rtp.monitor
>> +
>> +### Load additional modules from GConf settings. This can be configured with the paprefs tool.
>> +### Please keep in mind that the modules configured by paprefs might
>> +conflict with manually ### loaded modules.
>> +.ifexists module-gconf.so
>> +.nofail
>> +load-module module-gconf
>> +.fail
>> +.endif
>> +
>> +### Automatically restore the default sink/source when changed by
>> +the user ### during runtime ### NOTE: This should be loaded as early
>> +as possible so that subsequent modules ### that look up the default
>> +sink/source get the right value load-module
>> +module-default-device-restore
>> +
>> +### Automatically move streams to the default sink if the sink they
>> +are ### connected to dies, similar for sources load-module
>> +module-rescue-streams
>> +
>> +### Make sure we always have a sink around, even if it is a null sink.
>> +load-module module-always-sink
>> +
>> +### Honour intended role device property load-module
>> +module-intended-roles
>> +
>> +### Automatically suspend sinks/sources that become idle for too
>> +long load-module module-suspend-on-idle
>> +
>> +### If autoexit on idle is enabled we want to make sure we only quit
>> +### when no local session needs us anymore.
>> +.ifexists module-console-kit.so
>> +load-module module-console-kit
>> +.endif
>> +.ifexists module-systemd-login.so
>> +load-module module-systemd-login
>> +.endif
>> +
>> +### Enable positioned event sounds
>> +load-module module-position-event-sounds
>> +
>> +### Cork music/video streams when a phone stream is active
>> +load-module module-role-cork
>> +
>> +### Modules to allow autoloading of filters (such as echo
>> +cancellation) ### on demand. module-filter-heuristics tries to
>> +determine what filters ### make sense, and module-filter-apply does
>> +the heavy-lifting of ### loading modules and rerouting streams.
>> +load-module module-filter-heuristics load-module module-filter-apply
>> +
>> +### Load DBus protocol
>> +.ifexists module-dbus-protocol.so
>> +load-module module-dbus-protocol
>> +.endif
>> +
>> +# X11 modules should not be started from default.pa so that one
>> +daemon # can be shared by multiple sessions.
>> +
>> +### Load X11 bell module
>> +#load-module module-x11-bell sample=bell-windowing-system
>> +
>> +### Register ourselves in the X11 session manager #load-module
>> +module-x11-xsmp
>> +
>> +### Publish connection data in the X11 root window #.ifexists
>> +module-x11-publish.so #.nofail #load-module module-x11-publish
>> +#.fail #.endif
>> +
>> +### Make some devices default
>> +#set-default-sink output
>> +#set-default-source input
>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> index b9acb36..95b955d 100644
>> --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>> @@ -1,4 +1,24 @@
>>
>> CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
>>
>> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>> +IMX_PATCHES = " file://daemon.conf \
>> + file://default.pa \
>> +"
>> +SRC_URI_append_mx6 = "${IMX_PATCHES}"
>> +SRC_URI_append_mx7 = "${IMX_PATCHES}"
>> +
>> +do_install_append() {
>> + install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
>> + install -m 0644 ${WORKDIR}/default.pa
>> +${D}${sysconfdir}/pulse/default.pa
>> +
>> + #Fix me: Remove the kde desktop, because there are two destop in default
>> + # (pulseaudio-kde.destop, pulseaudio.destop), then the pulseaudio server
>> + # will be started twice, pulseaudio will have issue to switch to default input/output.
>> + if [ -e ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop ]
>> + then
>> + rm ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop
>> + fi
>> +}
>> +
>> PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
--
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
2015-08-06 10:01 ` Zhu Carol
@ 2015-08-06 11:38 ` Carlos Rafael Giani
0 siblings, 0 replies; 9+ messages in thread
From: Carlos Rafael Giani @ 2015-08-06 11:38 UTC (permalink / raw)
To: Zhu Carol; +Cc: meta-freescale
That is interesting. I assumed the Speex one is a pretty good quality
resampler, at least unless you use a really low quality value (4 or
lower). I can imagine though that the most recent ffmpeg resampler (IIRC
they were writing new ones) is faster and has a better quality, given
that Speex is pretty much dead. Nice to know.
Rephrase it to "use the ffmpeg resample instead of the speex one, since
the ffmpeg resampler gives better quality".
On 08/06/2015 12:01 PM, Zhu Carol wrote:
> And the reason why using ffmpeg resampler over the speex ones is that we need better quality audio.
>
> B.R.
> Yuqing
>
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Zhu Carol
> Sent: Thursday, August 06, 2015 4:43 PM
> To: Carlos Rafael Giani; meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
>
> Ok, thanks for your helpful suggestion.
>
> B.R.
> Yuqing Zhu
>
> -----Original Message-----
> From: Carlos Rafael Giani [mailto:dv@pseudoterminal.org]
> Sent: Thursday, August 06, 2015 2:54 PM
> To: Zhu Yuqing-B54851; meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration
>
> Right, ok. Its just minor, but rephrase it please to say: "Normally, PulseAudio exits after an application finishes using it. Set exit-idle-time to -1 in the daemon.conf to force PulseAudio to not exit then."
> Its a lot clearer :)
>
> Am 2015-08-06 um 08:51 schrieb Zhu Carol:
>> Hi Carlos,
>>
>> Yes, it's a workaround to force pulseaudio not to exit.
>>
>> B.R.
>> Yuqing Zhu
>>
>> -----Original Message-----
>> From: meta-freescale-bounces@yoctoproject.org
>> [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Carlos
>> Rafael Giani
>> Sent: Thursday, August 06, 2015 2:46 AM
>> To: meta-freescale@yoctoproject.org
>> Subject: Re: [meta-freescale] [meta-fsl-arm][PATCH v5] pulseaudio: Add
>> PulseAudio configuration
>>
>> Regarding the exit-idle-time change, am I right to assume that this is a workaround for the problem that otherwise, pulseaudio will quit after an application stops using it? One link about this:
>> https://bbs.archlinux.org/viewtopic.php?id=92851
>>
>> Am 2015-07-30 um 21:18 schrieb Yuqing Zhu:
>>> Set ffmpeg as resample method
>>>
>>> Set exit idle time as -1 to force it not to exit
>>>
>>> Signed-off-by: Yuqing Zhu <b54851@freescale.com>
>>> ---
>>> .../pulseaudio/pulseaudio/daemon.conf | 87 +++++++++++
>>> .../pulseaudio/pulseaudio/default.pa | 170 +++++++++++++++++++++
>>> .../pulseaudio/pulseaudio_%.bbappend | 20 +++
>>> 3 files changed, 277 insertions(+)
>>> create mode 100644 recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>>> create mode 100644
>>> recipes-multimedia/pulseaudio/pulseaudio/default.pa
>>>
>>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>>> b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>>> new file mode 100644
>>> index 0000000..54854eb
>>> --- /dev/null
>>> +++ b/recipes-multimedia/pulseaudio/pulseaudio/daemon.conf
>>> @@ -0,0 +1,87 @@
>>> +# This file is part of PulseAudio.
>>> +#
>>> +# PulseAudio is free software; you can redistribute it and/or modify
>>> +# it under the terms of the GNU Lesser General Public License as
>>> +published by # the Free Software Foundation; either version 2 of the
>>> +License, or # (at your option) any later version.
>>> +#
>>> +# PulseAudio is distributed in the hope that it will be useful, but
>>> +# WITHOUT ANY WARRANTY; without even the implied warranty of #
>>> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
>>> +General Public License for more details.
>>> +#
>>> +# You should have received a copy of the GNU Lesser General Public
>>> +License # along with PulseAudio; if not, write to the Free Software
>>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
>>> +02111-1307 # USA.
>>> +
>>> +## Configuration file for the PulseAudio daemon. See
>>> +pulse-daemon.conf(5) for ## more information. Default values are
>>> +commented out. Use either ; or # for ## commenting.
>>> +
>>> +; daemonize = no
>>> +; fail = yes
>>> +; allow-module-loading = yes
>>> +; allow-exit = yes
>>> +; use-pid-file = yes
>>> +; system-instance = no
>>> +; local-server-type = user
>>> +; enable-shm = yes
>>> +; shm-size-bytes = 0 # setting this 0 will use the system-default,
>>> +usually 64 MiB ; lock-memory = no ; cpu-limit = no
>>> +
>>> +; high-priority = yes
>>> +; nice-level = -11
>>> +
>>> +; realtime-scheduling = yes
>>> +; realtime-priority = 5
>>> +
>>> +exit-idle-time = -1
>>> +; scache-idle-time = 20
>>> +
>>> +; dl-search-path = (depends on architecture)
>>> +
>>> +; load-default-script-file = yes
>>> +; default-script-file = /etc/pulse/default.pa
>>> +
>>> +; log-target = auto
>>> +; log-level = notice
>>> +; log-meta = no
>>> +; log-time = no
>>> +; log-backtrace = 0
>>> +
>>> +resample-method = ffmpeg
>>> +; enable-remixing = yes
>>> +; enable-lfe-remixing = no
>>> +
>>> +flat-volumes = no
>>> +
>>> +; rlimit-fsize = -1
>>> +; rlimit-data = -1
>>> +; rlimit-stack = -1
>>> +; rlimit-core = -1
>>> +; rlimit-as = -1
>>> +; rlimit-rss = -1
>>> +; rlimit-nproc = -1
>>> +; rlimit-nofile = 256
>>> +; rlimit-memlock = -1
>>> +; rlimit-locks = -1
>>> +; rlimit-sigpending = -1
>>> +; rlimit-msgqueue = -1
>>> +; rlimit-nice = 31
>>> +; rlimit-rtprio = 9
>>> +; rlimit-rttime = 1000000
>>> +
>>> +; default-sample-format = s16le
>>> +; default-sample-rate = 44100
>>> +; alternate-sample-rate = 48000
>>> +; default-sample-channels = 2
>>> +; default-channel-map = front-left,front-right
>>> +
>>> +; default-fragments = 4
>>> +; default-fragment-size-msec = 25
>>> +
>>> +; enable-deferred-volume = yes
>>> +; deferred-volume-safety-margin-usec = 8000 ;
>>> +deferred-volume-extra-delay-usec = 0
>>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>>> b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>>> new file mode 100644
>>> index 0000000..83a6ba8
>>> --- /dev/null
>>> +++ b/recipes-multimedia/pulseaudio/pulseaudio/default.pa
>>> @@ -0,0 +1,170 @@
>>> +#!/usr/bin/pulseaudio -nF
>>> +#
>>> +# This file is part of PulseAudio.
>>> +#
>>> +# PulseAudio is free software; you can redistribute it and/or modify
>>> +it # under the terms of the GNU Lesser General Public License as
>>> +published by # the Free Software Foundation; either version 2 of the
>>> +License, or # (at your option) any later version.
>>> +#
>>> +# PulseAudio is distributed in the hope that it will be useful, but
>>> +# WITHOUT ANY WARRANTY; without even the implied warranty of #
>>> +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
>>> +General Public License for more details.
>>> +#
>>> +# You should have received a copy of the GNU Lesser General Public
>>> +License # along with PulseAudio; if not, write to the Free Software
>>> +Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
>>> +
>>> +# This startup script is used only if PulseAudio is started per-user
>>> +# (i.e. not in system mode)
>>> +
>>> +.nofail
>>> +
>>> +### Load something into the sample cache #load-sample-lazy x11-bell
>>> +/usr/share/sounds/gtk-events/activate.wav
>>> +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
>>> +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
>>> +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
>>> +
>>> +.fail
>>> +
>>> +### Automatically restore the volume of streams and devices
>>> +load-module module-device-restore load-module module-stream-restore
>>> +load-module module-card-restore
>>> +
>>> +### Automatically augment property information from .desktop files
>>> +### stored in /usr/share/application load-module
>>> +module-augment-properties
>>> +
>>> +### Should be after module-*-restore but before module-*-detect
>>> +load-module module-switch-on-port-available
>>> +
>>> +### Load audio drivers statically
>>> +### (it's probably better to not load these drivers manually, but
>>> +instead ### use module-udev-detect -- see below -- for doing this
>>> +automatically) #load-module module-alsa-sink #load-module
>>> +module-alsa-source device=hw:1,0 #load-module module-oss
>>> +device="/dev/dsp" sink_name=output source_name=input #load-module
>>> +module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
>>> +#load-module module-null-sink #load-module module-pipe-sink
>>> +
>>> +### Automatically load driver modules depending on the hardware
>>> +available .ifexists module-udev-detect.so load-module
>>> +module-udev-detect tsched=0 .else ### Use the static hardware
>>> +detection module (for systems that lack udev support) load-module
>>> +module-detect .endif
>>> +
>>> +### Automatically connect sink and source if JACK server is present
>>> +.ifexists module-jackdbus-detect.so .nofail load-module
>>> +module-jackdbus-detect channels=2 .fail .endif
>>> +
>>> +### Automatically load driver modules for Bluetooth hardware
>>> +.ifexists module-bluetooth-policy.so load-module
>>> +module-bluetooth-policy .endif
>>> +
>>> +.ifexists module-bluetooth-discover.so load-module
>>> +module-bluetooth-discover .endif
>>> +
>>> +### Load several protocols
>>> +.ifexists module-esound-protocol-unix.so load-module
>>> +module-esound-protocol-unix .endif load-module
>>> +module-native-protocol-unix
>>> +
>>> +### Network access (may be configured with paprefs, so leave this
>>> +commented ### here if you plan to use paprefs) #load-module
>>> +module-esound-protocol-tcp #load-module module-native-protocol-tcp
>>> +#load-module module-zeroconf-publish
>>> +
>>> +### Load the RTP receiver module (also configured via paprefs, see
>>> +above) #load-module module-rtp-recv
>>> +
>>> +### Load the RTP sender module (also configured via paprefs, see
>>> +above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
>>> +#load-module module-rtp-send source=rtp.monitor
>>> +
>>> +### Load additional modules from GConf settings. This can be configured with the paprefs tool.
>>> +### Please keep in mind that the modules configured by paprefs might
>>> +conflict with manually ### loaded modules.
>>> +.ifexists module-gconf.so
>>> +.nofail
>>> +load-module module-gconf
>>> +.fail
>>> +.endif
>>> +
>>> +### Automatically restore the default sink/source when changed by
>>> +the user ### during runtime ### NOTE: This should be loaded as early
>>> +as possible so that subsequent modules ### that look up the default
>>> +sink/source get the right value load-module
>>> +module-default-device-restore
>>> +
>>> +### Automatically move streams to the default sink if the sink they
>>> +are ### connected to dies, similar for sources load-module
>>> +module-rescue-streams
>>> +
>>> +### Make sure we always have a sink around, even if it is a null sink.
>>> +load-module module-always-sink
>>> +
>>> +### Honour intended role device property load-module
>>> +module-intended-roles
>>> +
>>> +### Automatically suspend sinks/sources that become idle for too
>>> +long load-module module-suspend-on-idle
>>> +
>>> +### If autoexit on idle is enabled we want to make sure we only quit
>>> +### when no local session needs us anymore.
>>> +.ifexists module-console-kit.so
>>> +load-module module-console-kit
>>> +.endif
>>> +.ifexists module-systemd-login.so
>>> +load-module module-systemd-login
>>> +.endif
>>> +
>>> +### Enable positioned event sounds
>>> +load-module module-position-event-sounds
>>> +
>>> +### Cork music/video streams when a phone stream is active
>>> +load-module module-role-cork
>>> +
>>> +### Modules to allow autoloading of filters (such as echo
>>> +cancellation) ### on demand. module-filter-heuristics tries to
>>> +determine what filters ### make sense, and module-filter-apply does
>>> +the heavy-lifting of ### loading modules and rerouting streams.
>>> +load-module module-filter-heuristics load-module module-filter-apply
>>> +
>>> +### Load DBus protocol
>>> +.ifexists module-dbus-protocol.so
>>> +load-module module-dbus-protocol
>>> +.endif
>>> +
>>> +# X11 modules should not be started from default.pa so that one
>>> +daemon # can be shared by multiple sessions.
>>> +
>>> +### Load X11 bell module
>>> +#load-module module-x11-bell sample=bell-windowing-system
>>> +
>>> +### Register ourselves in the X11 session manager #load-module
>>> +module-x11-xsmp
>>> +
>>> +### Publish connection data in the X11 root window #.ifexists
>>> +module-x11-publish.so #.nofail #load-module module-x11-publish
>>> +#.fail #.endif
>>> +
>>> +### Make some devices default
>>> +#set-default-sink output
>>> +#set-default-source input
>>> diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>>> b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>>> index b9acb36..95b955d 100644
>>> --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>>> +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
>>> @@ -1,4 +1,24 @@
>>>
>>> CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
>>>
>>> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> +IMX_PATCHES = " file://daemon.conf \
>>> + file://default.pa \
>>> +"
>>> +SRC_URI_append_mx6 = "${IMX_PATCHES}"
>>> +SRC_URI_append_mx7 = "${IMX_PATCHES}"
>>> +
>>> +do_install_append() {
>>> + install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
>>> + install -m 0644 ${WORKDIR}/default.pa
>>> +${D}${sysconfdir}/pulse/default.pa
>>> +
>>> + #Fix me: Remove the kde desktop, because there are two destop in default
>>> + # (pulseaudio-kde.destop, pulseaudio.destop), then the pulseaudio server
>>> + # will be started twice, pulseaudio will have issue to switch to default input/output.
>>> + if [ -e ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop ]
>>> + then
>>> + rm ${D}${sysconfdir}/xdg/autostart/pulseaudio-kde.desktop
>>> + fi
>>> +}
>>> +
>>> PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
>> --
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-08-06 11:38 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-30 19:18 [meta-fsl-arm][PATCH v5] 3.14.38-6QP_Beta release Yuqing Zhu
2015-07-30 19:18 ` [meta-fsl-arm][PATCH v5] pulseaudio: Add PulseAudio configuration Yuqing Zhu
2015-08-05 18:39 ` Carlos Rafael Giani
2015-08-05 18:46 ` Carlos Rafael Giani
2015-08-06 6:51 ` Zhu Carol
2015-08-06 6:53 ` Carlos Rafael Giani
2015-08-06 8:43 ` Zhu Carol
2015-08-06 10:01 ` Zhu Carol
2015-08-06 11:38 ` Carlos Rafael Giani
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.