[PATCH v2 0/7] Exynos: MFC driver: reserved memory cleanup and IOMMU support

[PATCH v2 0/7] Exynos: MFC driver: reserved memory cleanup and IOMMU support

[Marek Szyprowski]

Hello,

This patchset finally perform cleanup of custom code in s5p-mfc codec
driver. The first part is removal of custom, driver specific code for
intializing and handling of reserved memory. Instead, a generic code for
reserved memory regions is used. Then, once it is done, the proper setup
of DMA parameters (max segment size) is applied for all multimedia
devices found on Exynos SoCs to let them properly handle shared buffers
mapped into contiguous DMA address space. The last patch adds support
for IOMMU to MFC driver. Some additional code is needed because of
specific requirements of MFC device firmware (see patch 7 for more
details). When no IOMMU is available, the code fallbacks to generic
reserved memory regions.

After applying this patchset, MFC device works correctly when IOMMU is
either enabled or disabled.

Patches have been tested on top of linux-next from 20151207. I would
prefer to merge patches 1-2 via Samsung tree and patches 3-7 via media
tree (there are no compile-time dependencies between patches 1-2 and
3-7). Patches have been tested on Odroid U3 (Exynos 4412 based) and
Odroid XU3 (Exynos 5422 based) boards.

Best regards
Marek Szyprowski
Samsung R&D Institute Poland


Changelog:
v2:
- reworked of_reserved_mem_init* functions on request from Rob Herring,
  added separate index and name based selection of reserved region
- adapted for of_reserved_mem_init* related changes

v1: https://www.mail-archive.com/linux-media@vger.kernel.org/msg94100.html
- initial version of another approach for this problem, rewrote driver code
  for new reserved memory bindings, which finally have been merged some
  time ago

v0: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/189259.html
- old patchset solving the same problem, abandoned due to other tasks
  and long time of merging reserved memory bindings and support code for
  it

Patch summary:

Marek Szyprowski (7):
  ARM: Exynos: convert MFC device to generic reserved memory bindings
  ARM: dts: exynos4412-odroid*: enable MFC device
  of: reserved_mem: add support for named reserved mem nodes
  media: vb2-dma-contig: add helper for setting dma max seg size
  media: set proper max seg size for devices on Exynos SoCs
  media: s5p-mfc: replace custom reserved memory init code with generic
    one
  media: s5p-mfc: add iommu support

 .../devicetree/bindings/media/s5p-mfc.txt          |  16 +--
 arch/arm/boot/dts/exynos4210-origen.dts            |  22 ++-
 arch/arm/boot/dts/exynos4210-smdkv310.dts          |  22 ++-
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi    |  24 ++++
 arch/arm/boot/dts/exynos4412-origen.dts            |  22 ++-
 arch/arm/boot/dts/exynos4412-smdk4412.dts          |  22 ++-
 arch/arm/boot/dts/exynos5250-arndale.dts           |  22 ++-
 arch/arm/boot/dts/exynos5250-smdk5250.dts          |  22 ++-
 arch/arm/boot/dts/exynos5250-spring.dts            |  22 ++-
 arch/arm/boot/dts/exynos5420-arndale-octa.dts      |  22 ++-
 arch/arm/boot/dts/exynos5420-smdk5420.dts          |  22 ++-
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |  22 ++-
 arch/arm/mach-exynos/Makefile                      |   2 -
 arch/arm/mach-exynos/exynos.c                      |  19 ---
 arch/arm/mach-exynos/mfc.h                         |  16 ---
 arch/arm/mach-exynos/s5p-dev-mfc.c                 |  94 -------------
 drivers/media/platform/exynos-gsc/gsc-core.c       |   1 +
 drivers/media/platform/exynos4-is/fimc-core.c      |   1 +
 drivers/media/platform/exynos4-is/fimc-is.c        |   1 +
 drivers/media/platform/exynos4-is/fimc-lite.c      |   1 +
 drivers/media/platform/s5p-g2d/g2d.c               |   1 +
 drivers/media/platform/s5p-jpeg/jpeg-core.c        |   1 +
 drivers/media/platform/s5p-mfc/s5p_mfc.c           | 153 ++++++++++++---------
 drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h     |  79 +++++++++++
 drivers/media/platform/s5p-tv/mixer_video.c        |   1 +
 drivers/media/v4l2-core/videobuf2-dma-contig.c     |  15 ++
 drivers/of/of_reserved_mem.c                       | 104 +++++++++++---
 include/linux/of_reserved_mem.h                    |  31 ++++-
 include/media/videobuf2-dma-contig.h               |   1 +
 29 files changed, 533 insertions(+), 248 deletions(-)
 delete mode 100644 arch/arm/mach-exynos/mfc.h
 delete mode 100644 arch/arm/mach-exynos/s5p-dev-mfc.c
 create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h

-- 
1.9.2

[PATCH v2 1/7] ARM: Exynos: convert MFC device to generic reserved memory bindings

[Marek Szyprowski]

This patch replaces custom properties for definining reserved memory
regions with generic reserved memory bindings. All custom code for
handling MFC-specific reserved memory can be now removed from Exynos-DT
generic board code.

Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 .../devicetree/bindings/media/s5p-mfc.txt          | 16 ++--
 arch/arm/boot/dts/exynos4210-origen.dts            | 22 ++++-
 arch/arm/boot/dts/exynos4210-smdkv310.dts          | 22 ++++-
 arch/arm/boot/dts/exynos4412-origen.dts            | 22 ++++-
 arch/arm/boot/dts/exynos4412-smdk4412.dts          | 22 ++++-
 arch/arm/boot/dts/exynos5250-arndale.dts           | 22 ++++-
 arch/arm/boot/dts/exynos5250-smdk5250.dts          | 22 ++++-
 arch/arm/boot/dts/exynos5250-spring.dts            | 22 ++++-
 arch/arm/boot/dts/exynos5420-arndale-octa.dts      | 22 ++++-
 arch/arm/boot/dts/exynos5420-smdk5420.dts          | 22 ++++-
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 22 ++++-
 arch/arm/mach-exynos/Makefile                      |  2 -
 arch/arm/mach-exynos/exynos.c                      | 19 -----
 arch/arm/mach-exynos/mfc.h                         | 16 ----
 arch/arm/mach-exynos/s5p-dev-mfc.c                 | 94 ----------------------
 15 files changed, 208 insertions(+), 159 deletions(-)
 delete mode 100644 arch/arm/mach-exynos/mfc.h
 delete mode 100644 arch/arm/mach-exynos/s5p-dev-mfc.c

diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index 2d5787e..4603673 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -21,16 +21,16 @@ Required properties:
   - clock-names : from common clock binding: must contain "mfc",
 		  corresponding to entry in the clocks property.
 
-  - samsung,mfc-r : Base address of the first memory bank used by MFC
-		    for DMA contiguous memory allocation and its size.
-
-  - samsung,mfc-l : Base address of the second memory bank used by MFC
-		    for DMA contiguous memory allocation and its size.
-
 Optional properties:
   - power-domains : power-domain property defined with a phandle
 			   to respective power domain.
 
+  - memory-region : from reserved memory binding: phandles to two reserved
+	memory regions: accessed by "left" and "right" mfc memory bus
+	interfaces, used when no SYSMMU support is available
+  - memory-region-names : from reserved memory binding: must be "left"
+	and "right"
+
 Example:
 SoC specific DT entry:
 
@@ -46,6 +46,6 @@ mfc: codec@13400000 {
 Board specific DT entry:
 
 codec@13400000 {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index b8f8669..5a5ec93 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -30,6 +30,24 @@
 		       0x70000000 0x10000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 		stdout-path = &serial_2;
@@ -292,8 +310,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index bc1448b..0d204b7 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -26,6 +26,24 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 		stdout-path = &serial_1;
@@ -137,8 +155,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index c8d86af..fbeff41 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -25,6 +25,24 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs ="console=ttySAC2,115200";
 		stdout-path = &serial_2;
@@ -470,8 +488,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index c2421df..22fb698 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -23,6 +23,24 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 		stdout-path = &serial_1;
@@ -116,8 +134,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532..30ada98 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -23,6 +23,24 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "console=ttySAC2,115200";
 	};
@@ -518,8 +536,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd4..88fe16d 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -25,6 +25,24 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
@@ -346,8 +364,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index c1edd6d..607d133 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -23,6 +23,24 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "console=tty1";
 		stdout-path = "serial3:115200n8";
@@ -427,8 +445,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 4ecef69..cdaf49a 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -24,6 +24,24 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "console=ttySAC3,115200";
 	};
@@ -345,8 +363,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ac35aef..159e6d9 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -21,6 +21,24 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "console=ttySAC2,115200 init=/linuxrc";
 	};
@@ -355,8 +373,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 1af5bdc..46455ed 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -23,6 +23,24 @@
 		reg = <0x40000000 0x7EA00000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		linux,stdout-path = &serial_2;
 	};
@@ -324,8 +342,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 2f30676..bcefb54 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -23,5 +23,3 @@ AFLAGS_sleep.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_EXYNOS5420_MCPM)	+= mcpm-exynos.o
 CFLAGS_mcpm-exynos.o		+= -march=armv7-a
-
-obj-$(CONFIG_S5P_DEV_MFC)	+= s5p-dev-mfc.o
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 1c47aee..662f329e 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -30,7 +30,6 @@
 #include <mach/map.h>
 
 #include "common.h"
-#include "mfc.h"
 #include "regs-pmu.h"
 
 void __iomem *pmu_base_addr;
@@ -290,23 +289,6 @@ static char const *const exynos_dt_compat[] __initconst = {
 	NULL
 };
 
-static void __init exynos_reserve(void)
-{
-#ifdef CONFIG_S5P_DEV_MFC
-	int i;
-	char *mfc_mem[] = {
-		"samsung,mfc-v5",
-		"samsung,mfc-v6",
-		"samsung,mfc-v7",
-		"samsung,mfc-v8",
-	};
-
-	for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
-		if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
-			break;
-#endif
-}
-
 static void __init exynos_dt_fixup(void)
 {
 	/*
@@ -328,6 +310,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	.init_machine	= exynos_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.dt_compat	= exynos_dt_compat,
-	.reserve	= exynos_reserve,
 	.dt_fixup	= exynos_dt_fixup,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mfc.h b/arch/arm/mach-exynos/mfc.h
deleted file mode 100644
index dec93cd..0000000
--- a/arch/arm/mach-exynos/mfc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2013 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_MFC_H
-#define __MACH_EXYNOS_MFC_H __FILE__
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
-				int depth, void *data);
-
-#endif /* __MACH_EXYNOS_MFC_H */
diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c
deleted file mode 100644
index 0b04b6b..0000000
--- a/arch/arm/mach-exynos/s5p-dev-mfc.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <linux/of_fdt.h>
-#include <linux/of.h>
-
-static struct platform_device s5p_device_mfc_l;
-static struct platform_device s5p_device_mfc_r;
-
-struct s5p_mfc_dt_meminfo {
-	unsigned long	loff;
-	unsigned long	lsize;
-	unsigned long	roff;
-	unsigned long	rsize;
-	char		*compatible;
-};
-
-struct s5p_mfc_reserved_mem {
-	phys_addr_t	base;
-	unsigned long	size;
-	struct device	*dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-
-static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize)
-{
-	int i;
-
-	s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
-	s5p_mfc_mem[0].base = rbase;
-	s5p_mfc_mem[0].size = rsize;
-
-	s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
-	s5p_mfc_mem[1].base = lbase;
-	s5p_mfc_mem[1].size = lsize;
-
-	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
-		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
-		if (memblock_remove(area->base, area->size)) {
-			printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
-			       area->size, (unsigned long) area->base);
-			area->base = 0;
-		}
-	}
-}
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
-				int depth, void *data)
-{
-	const __be32 *prop;
-	int len;
-	struct s5p_mfc_dt_meminfo mfc_mem;
-
-	if (!data)
-		return 0;
-
-	if (!of_flat_dt_is_compatible(node, data))
-		return 0;
-
-	prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
-	if (!prop || (len != 2 * sizeof(unsigned long)))
-		return 0;
-
-	mfc_mem.loff = be32_to_cpu(prop[0]);
-	mfc_mem.lsize = be32_to_cpu(prop[1]);
-
-	prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
-	if (!prop || (len != 2 * sizeof(unsigned long)))
-		return 0;
-
-	mfc_mem.roff = be32_to_cpu(prop[0]);
-	mfc_mem.rsize = be32_to_cpu(prop[1]);
-
-	s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
-			mfc_mem.loff, mfc_mem.lsize);
-
-	return 1;
-}
-- 
1.9.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/7] ARM: Exynos: convert MFC device to generic reserved memory bindings

[Marek Szyprowski]

This patch replaces custom properties for definining reserved memory
regions with generic reserved memory bindings. All custom code for
handling MFC-specific reserved memory can be now removed from Exynos-DT
generic board code.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 .../devicetree/bindings/media/s5p-mfc.txt          | 16 ++--
 arch/arm/boot/dts/exynos4210-origen.dts            | 22 ++++-
 arch/arm/boot/dts/exynos4210-smdkv310.dts          | 22 ++++-
 arch/arm/boot/dts/exynos4412-origen.dts            | 22 ++++-
 arch/arm/boot/dts/exynos4412-smdk4412.dts          | 22 ++++-
 arch/arm/boot/dts/exynos5250-arndale.dts           | 22 ++++-
 arch/arm/boot/dts/exynos5250-smdk5250.dts          | 22 ++++-
 arch/arm/boot/dts/exynos5250-spring.dts            | 22 ++++-
 arch/arm/boot/dts/exynos5420-arndale-octa.dts      | 22 ++++-
 arch/arm/boot/dts/exynos5420-smdk5420.dts          | 22 ++++-
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 22 ++++-
 arch/arm/mach-exynos/Makefile                      |  2 -
 arch/arm/mach-exynos/exynos.c                      | 19 -----
 arch/arm/mach-exynos/mfc.h                         | 16 ----
 arch/arm/mach-exynos/s5p-dev-mfc.c                 | 94 ----------------------
 15 files changed, 208 insertions(+), 159 deletions(-)
 delete mode 100644 arch/arm/mach-exynos/mfc.h
 delete mode 100644 arch/arm/mach-exynos/s5p-dev-mfc.c

diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index 2d5787e..4603673 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -21,16 +21,16 @@ Required properties:
   - clock-names : from common clock binding: must contain "mfc",
 		  corresponding to entry in the clocks property.
 
-  - samsung,mfc-r : Base address of the first memory bank used by MFC
-		    for DMA contiguous memory allocation and its size.
-
-  - samsung,mfc-l : Base address of the second memory bank used by MFC
-		    for DMA contiguous memory allocation and its size.
-
 Optional properties:
   - power-domains : power-domain property defined with a phandle
 			   to respective power domain.
 
+  - memory-region : from reserved memory binding: phandles to two reserved
+	memory regions: accessed by "left" and "right" mfc memory bus
+	interfaces, used when no SYSMMU support is available
+  - memory-region-names : from reserved memory binding: must be "left"
+	and "right"
+
 Example:
 SoC specific DT entry:
 
@@ -46,6 +46,6 @@ mfc: codec@13400000 {
 Board specific DT entry:
 
 codec@13400000 {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index b8f8669..5a5ec93 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -30,6 +30,24 @@
 		       0x70000000 0x10000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 		stdout-path = &serial_2;
@@ -292,8 +310,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index bc1448b..0d204b7 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -26,6 +26,24 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 		stdout-path = &serial_1;
@@ -137,8 +155,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index c8d86af..fbeff41 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -25,6 +25,24 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs ="console=ttySAC2,115200";
 		stdout-path = &serial_2;
@@ -470,8 +488,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index c2421df..22fb698 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -23,6 +23,24 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 		stdout-path = &serial_1;
@@ -116,8 +134,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532..30ada98 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -23,6 +23,24 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "console=ttySAC2,115200";
 	};
@@ -518,8 +536,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd4..88fe16d 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -25,6 +25,24 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
@@ -346,8 +364,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index c1edd6d..607d133 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -23,6 +23,24 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "console=tty1";
 		stdout-path = "serial3:115200n8";
@@ -427,8 +445,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 4ecef69..cdaf49a 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -24,6 +24,24 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "console=ttySAC3,115200";
 	};
@@ -345,8 +363,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ac35aef..159e6d9 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -21,6 +21,24 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		bootargs = "console=ttySAC2,115200 init=/linuxrc";
 	};
@@ -355,8 +373,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 1af5bdc..46455ed 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -23,6 +23,24 @@
 		reg = <0x40000000 0x7EA00000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x800000>;
+		};
+
+		mfc_right: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x800000>;
+		};
+	};
+
 	chosen {
 		linux,stdout-path = &serial_2;
 	};
@@ -324,8 +342,8 @@
 };
 
 &mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
 };
 
 &mmc_0 {
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 2f30676..bcefb54 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -23,5 +23,3 @@ AFLAGS_sleep.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_EXYNOS5420_MCPM)	+= mcpm-exynos.o
 CFLAGS_mcpm-exynos.o		+= -march=armv7-a
-
-obj-$(CONFIG_S5P_DEV_MFC)	+= s5p-dev-mfc.o
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 1c47aee..662f329e 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -30,7 +30,6 @@
 #include <mach/map.h>
 
 #include "common.h"
-#include "mfc.h"
 #include "regs-pmu.h"
 
 void __iomem *pmu_base_addr;
@@ -290,23 +289,6 @@ static char const *const exynos_dt_compat[] __initconst = {
 	NULL
 };
 
-static void __init exynos_reserve(void)
-{
-#ifdef CONFIG_S5P_DEV_MFC
-	int i;
-	char *mfc_mem[] = {
-		"samsung,mfc-v5",
-		"samsung,mfc-v6",
-		"samsung,mfc-v7",
-		"samsung,mfc-v8",
-	};
-
-	for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
-		if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
-			break;
-#endif
-}
-
 static void __init exynos_dt_fixup(void)
 {
 	/*
@@ -328,6 +310,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	.init_machine	= exynos_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.dt_compat	= exynos_dt_compat,
-	.reserve	= exynos_reserve,
 	.dt_fixup	= exynos_dt_fixup,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mfc.h b/arch/arm/mach-exynos/mfc.h
deleted file mode 100644
index dec93cd..0000000
--- a/arch/arm/mach-exynos/mfc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2013 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_MFC_H
-#define __MACH_EXYNOS_MFC_H __FILE__
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
-				int depth, void *data);
-
-#endif /* __MACH_EXYNOS_MFC_H */
diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c
deleted file mode 100644
index 0b04b6b..0000000
--- a/arch/arm/mach-exynos/s5p-dev-mfc.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <linux/of_fdt.h>
-#include <linux/of.h>
-
-static struct platform_device s5p_device_mfc_l;
-static struct platform_device s5p_device_mfc_r;
-
-struct s5p_mfc_dt_meminfo {
-	unsigned long	loff;
-	unsigned long	lsize;
-	unsigned long	roff;
-	unsigned long	rsize;
-	char		*compatible;
-};
-
-struct s5p_mfc_reserved_mem {
-	phys_addr_t	base;
-	unsigned long	size;
-	struct device	*dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-
-static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize)
-{
-	int i;
-
-	s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
-	s5p_mfc_mem[0].base = rbase;
-	s5p_mfc_mem[0].size = rsize;
-
-	s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
-	s5p_mfc_mem[1].base = lbase;
-	s5p_mfc_mem[1].size = lsize;
-
-	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
-		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
-		if (memblock_remove(area->base, area->size)) {
-			printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
-			       area->size, (unsigned long) area->base);
-			area->base = 0;
-		}
-	}
-}
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
-				int depth, void *data)
-{
-	const __be32 *prop;
-	int len;
-	struct s5p_mfc_dt_meminfo mfc_mem;
-
-	if (!data)
-		return 0;
-
-	if (!of_flat_dt_is_compatible(node, data))
-		return 0;
-
-	prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
-	if (!prop || (len != 2 * sizeof(unsigned long)))
-		return 0;
-
-	mfc_mem.loff = be32_to_cpu(prop[0]);
-	mfc_mem.lsize = be32_to_cpu(prop[1]);
-
-	prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
-	if (!prop || (len != 2 * sizeof(unsigned long)))
-		return 0;
-
-	mfc_mem.roff = be32_to_cpu(prop[0]);
-	mfc_mem.rsize = be32_to_cpu(prop[1]);
-
-	s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
-			mfc_mem.loff, mfc_mem.lsize);
-
-	return 1;
-}
-- 
1.9.2

[PATCH v2 2/7] ARM: dts: exynos4412-odroid*: enable MFC device

[Marek Szyprowski]

Enable support for Multimedia Codec (MFC) device for all Exynos4412-based
Odroid boards.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index edf0fc8..5825abf 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -18,6 +18,24 @@
 		stdout-path = &serial_1;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@77000000 {
+			compatible = "shared-dma-pool";
+			reusable;
+			reg = <0x77000000 0x1000000>;
+		};
+
+		mfc_right: region@78000000 {
+			compatible = "shared-dma-pool";
+			reusable;
+			reg = <0x78000000 0x1000000>;
+		};
+	};
+
 	firmware@0204F000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x0204F000 0x1000>;
@@ -451,6 +469,12 @@
 	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
 };
 
+&mfc {
+	memory-region = <&mfc_left>, <&mfc_right>;
+	memory-region-names = "left", "right";
+	status = "okay";
+};
+
 &mixer {
 	status = "okay";
 };
-- 
1.9.2

[PATCH v2 3/7] of: reserved_mem: add support for named reserved mem nodes

[Marek Szyprowski]

This patch allows device drivers to initialize more than one reserved
memory region assigned to given device. When driver needs to use more
than one reserved memory region, it should allocate child devices and
initialize regions by index or name for each of its child devices.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/of/of_reserved_mem.c    | 104 ++++++++++++++++++++++++++++++++--------
 include/linux/of_reserved_mem.h |  31 ++++++++++--
 2 files changed, 112 insertions(+), 23 deletions(-)

diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index be77e75..a583480 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -21,6 +21,7 @@
 #include <linux/sizes.h>
 #include <linux/of_reserved_mem.h>
 #include <linux/sort.h>
+#include <linux/slab.h>
 
 #define MAX_RESERVED_REGIONS	16
 static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
@@ -281,53 +282,116 @@ static inline struct reserved_mem *__find_rmem(struct device_node *node)
 	return NULL;
 }
 
+struct rmem_assigned_device {
+	struct device *dev;
+	struct reserved_mem *rmem;
+	struct list_head list;
+};
+
+static LIST_HEAD(of_rmem_assigned_device_list);
+static DEFINE_MUTEX(of_rmem_assigned_device_mutex);
+
 /**
  * of_reserved_mem_device_init() - assign reserved memory region to given device
+ * @dev:	Pointer to the device to configure
+ * @np:		Pointer to the device_node with 'reserved-memory' property
+ * @idx:	Index of selected region
+ *
+ * This function assigns respective DMA-mapping operations based on reserved
+ * memory region specified by 'memory-region' property in @np node to the @dev
+ * device. When driver needs to use more than one reserved memory region, it
+ * should allocate child devices and initialize regions by name for each of
+ * child device.
  *
- * This function assign memory region pointed by "memory-region" device tree
- * property to the given device.
+ * Returns error code or zero on success.
  */
-int of_reserved_mem_device_init(struct device *dev)
+int of_reserved_mem_init(struct device *dev, struct device_node *np, int idx)
 {
+	struct rmem_assigned_device *rd;
+	struct device_node *target;
 	struct reserved_mem *rmem;
-	struct device_node *np;
 	int ret;
 
-	np = of_parse_phandle(dev->of_node, "memory-region", 0);
-	if (!np)
-		return -ENODEV;
+	if (!np || !dev)
+		return -EINVAL;
+
+	target = of_parse_phandle(np, "memory-region", idx);
+	if (!target)
+		return -EINVAL;
 
-	rmem = __find_rmem(np);
-	of_node_put(np);
+	rmem = __find_rmem(target);
+	of_node_put(target);
 
 	if (!rmem || !rmem->ops || !rmem->ops->device_init)
 		return -EINVAL;
 
+	rd = kmalloc(sizeof(struct rmem_assigned_device), GFP_KERNEL);
+	if (!rd)
+		return -ENOMEM;
+
 	ret = rmem->ops->device_init(rmem, dev);
-	if (ret == 0)
+	if (ret == 0) {
+		rd->dev = dev;
+		rd->rmem = rmem;
+
+		mutex_lock(&of_rmem_assigned_device_mutex);
+		list_add(&rd->list, &of_rmem_assigned_device_list);
+		mutex_unlock(&of_rmem_assigned_device_mutex);
+
 		dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
+	} else {
+		kfree(rd);
+	}
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_reserved_mem_device_init);
+EXPORT_SYMBOL_GPL(of_reserved_mem_init);
+
+/**
+ * of_reserved_mem_device_init() - assign reserved memory region to given device
+ * @dev:	Pointer to the device to configure
+ * @np:		Pointer to the device_node with 'reserved-memory' property
+ * @name:	Name of the selected region
+ *
+ * This function assigns respective DMA-mapping operations based on reserved
+ * memory region specified by 'memory-region' property in @np node, named @name
+ * to the @dev device.
+ *
+ * Returns error code or zero on success.
+ */
+int of_reserved_mem_init_by_name(struct device *dev, struct device_node *np,
+					   const char *name)
+{
+	int idx = of_property_match_string(np, "memory-region-names", name);
+
+	if (idx < 0)
+		return -EINVAL;
+	return of_reserved_mem_init(dev, np, idx);
+}
+EXPORT_SYMBOL_GPL(of_reserved_mem_init_by_name);
 
 /**
  * of_reserved_mem_device_release() - release reserved memory device structures
+ * @dev:	Pointer to the device to deconfigure
  *
  * This function releases structures allocated for memory region handling for
  * the given device.
  */
 void of_reserved_mem_device_release(struct device *dev)
 {
-	struct reserved_mem *rmem;
-	struct device_node *np;
-
-	np = of_parse_phandle(dev->of_node, "memory-region", 0);
-	if (!np)
-		return;
-
-	rmem = __find_rmem(np);
-	of_node_put(np);
+	struct rmem_assigned_device *rd;
+	struct reserved_mem *rmem = NULL;
+
+	mutex_lock(&of_rmem_assigned_device_mutex);
+	list_for_each_entry(rd, &of_rmem_assigned_device_list, list) {
+		if (rd->dev == dev) {
+			rmem = rd->rmem;
+			list_del(&rd->list);
+			kfree(rd);
+			break;
+		}
+	}
+	mutex_unlock(&of_rmem_assigned_device_mutex);
 
 	if (!rmem || !rmem->ops || !rmem->ops->device_release)
 		return;
diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h
index ad2f670..0b928ad 100644
--- a/include/linux/of_reserved_mem.h
+++ b/include/linux/of_reserved_mem.h
@@ -1,7 +1,8 @@
 #ifndef __OF_RESERVED_MEM_H
 #define __OF_RESERVED_MEM_H
 
-struct device;
+#include <linux/device.h>
+
 struct of_phandle_args;
 struct reserved_mem_ops;
 
@@ -28,14 +29,23 @@ typedef int (*reservedmem_of_init_fn)(struct reserved_mem *rmem);
 	_OF_DECLARE(reservedmem, name, compat, init, reservedmem_of_init_fn)
 
 #ifdef CONFIG_OF_RESERVED_MEM
-int of_reserved_mem_device_init(struct device *dev);
+
+int of_reserved_mem_init(struct device *dev, struct device_node *np, int idx);
+int of_reserved_mem_init_by_name(struct device *dev, struct device_node *np,
+				const char *name);
 void of_reserved_mem_device_release(struct device *dev);
 
 void fdt_init_reserved_mem(void);
 void fdt_reserved_mem_save_node(unsigned long node, const char *uname,
 			       phys_addr_t base, phys_addr_t size);
 #else
-static inline int of_reserved_mem_device_init(struct device *dev)
+static inline int of_reserved_mem_init(struct device *dev,
+				struct device_node *np, int idx)
+{
+	return -ENOSYS;
+}
+static inline int of_reserved_mem_init_by_name(struct device *dev,
+				struct device_node *np, const char *name)
 {
 	return -ENOSYS;
 }
@@ -46,4 +56,19 @@ static inline void fdt_reserved_mem_save_node(unsigned long node,
 		const char *uname, phys_addr_t base, phys_addr_t size) { }
 #endif
 
+/**
+ * of_reserved_mem_device_init() - assign reserved memory region to given device
+ * @dev:	Pointer to the device to configure
+ *
+ * This function assigns respective DMA-mapping operations based on the first
+ * reserved memory region specified by 'memory-region' property in device tree
+ * node of the given device.
+ *
+ * Returns error code or zero on success.
+ */
+static inline int of_reserved_mem_device_init(struct device *dev)
+{
+	return of_reserved_mem_init(dev, dev->of_node, 0);
+}
+
 #endif /* __OF_RESERVED_MEM_H */
-- 
1.9.2

[PATCH v2 4/7] media: vb2-dma-contig: add helper for setting dma max seg size

[Marek Szyprowski]

Add a helper function for device drivers to set DMA's max_seg_size.
Setting it to largest possible value lets DMA-mapping API always create
contiguous mappings in DMA address space. This is essential for all
devices, which use dma-contig videobuf2 memory allocator and shared
buffers.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/media/v4l2-core/videobuf2-dma-contig.c | 15 +++++++++++++++
 include/media/videobuf2-dma-contig.h           |  1 +
 2 files changed, 16 insertions(+)

diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c
index c331272..628518d 100644
--- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
+++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
@@ -742,6 +742,21 @@ void vb2_dma_contig_cleanup_ctx(void *alloc_ctx)
 }
 EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx);
 
+int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size)
+{
+	if (!dev->dma_parms) {
+		dev->dma_parms = devm_kzalloc(dev, sizeof(dev->dma_parms),
+					      GFP_KERNEL);
+		if (!dev->dma_parms)
+			return -ENOMEM;
+	}
+	if (dma_get_max_seg_size(dev) < size)
+		return dma_set_max_seg_size(dev, size);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size);
+
 MODULE_DESCRIPTION("DMA-contig memory handling routines for videobuf2");
 MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>");
 MODULE_LICENSE("GPL");
diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h
index c33dfa6..0e6ba64 100644
--- a/include/media/videobuf2-dma-contig.h
+++ b/include/media/videobuf2-dma-contig.h
@@ -26,6 +26,7 @@ vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no)
 
 void *vb2_dma_contig_init_ctx(struct device *dev);
 void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
+int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size);
 
 extern const struct vb2_mem_ops vb2_dma_contig_memops;
 
-- 
1.9.2

[PATCH v2 5/7] media: set proper max seg size for devices on Exynos SoCs

[Marek Szyprowski]

All multimedia devices found on Exynos SoCs support only contiguous
buffers, so set DMA max segment size to DMA_BIT_MASK(32) to let memory
allocator to correctly create contiguous memory mappings.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/media/platform/exynos-gsc/gsc-core.c  | 1 +
 drivers/media/platform/exynos4-is/fimc-core.c | 1 +
 drivers/media/platform/exynos4-is/fimc-is.c   | 1 +
 drivers/media/platform/exynos4-is/fimc-lite.c | 1 +
 drivers/media/platform/s5p-g2d/g2d.c          | 1 +
 drivers/media/platform/s5p-jpeg/jpeg-core.c   | 1 +
 drivers/media/platform/s5p-mfc/s5p_mfc.c      | 2 ++
 drivers/media/platform/s5p-tv/mixer_video.c   | 1 +
 8 files changed, 9 insertions(+)

diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
index 9b9e423..4f90be4 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.c
+++ b/drivers/media/platform/exynos-gsc/gsc-core.c
@@ -1140,6 +1140,7 @@ static int gsc_probe(struct platform_device *pdev)
 		goto err_m2m;
 
 	/* Initialize continious memory allocator */
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 	gsc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(gsc->alloc_ctx)) {
 		ret = PTR_ERR(gsc->alloc_ctx);
diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c
index cef2a7f..368e19b 100644
--- a/drivers/media/platform/exynos4-is/fimc-core.c
+++ b/drivers/media/platform/exynos4-is/fimc-core.c
@@ -1019,6 +1019,7 @@ static int fimc_probe(struct platform_device *pdev)
 	}
 
 	/* Initialize contiguous memory allocator */
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 	fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(fimc->alloc_ctx)) {
 		ret = PTR_ERR(fimc->alloc_ctx);
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 49658ca..123772f 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -841,6 +841,7 @@ static int fimc_is_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_pm;
 
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 	is->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(is->alloc_ctx)) {
 		ret = PTR_ERR(is->alloc_ctx);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index 60660c3..a7e47c7 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -1564,6 +1564,7 @@ static int fimc_lite_probe(struct platform_device *pdev)
 			goto err_sd;
 	}
 
+	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 	fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(fimc->alloc_ctx)) {
 		ret = PTR_ERR(fimc->alloc_ctx);
diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c
index e1936d9..31f6c23 100644
--- a/drivers/media/platform/s5p-g2d/g2d.c
+++ b/drivers/media/platform/s5p-g2d/g2d.c
@@ -681,6 +681,7 @@ static int g2d_probe(struct platform_device *pdev)
 		goto put_clk_gate;
 	}
 
+	vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
 	dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
 	if (IS_ERR(dev->alloc_ctx)) {
 		ret = PTR_ERR(dev->alloc_ctx);
diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 4a608cb..6bd92f0 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -2839,6 +2839,7 @@ static int s5p_jpeg_probe(struct platform_device *pdev)
 		goto device_register_rollback;
 	}
 
+	vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
 	jpeg->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
 	if (IS_ERR(jpeg->alloc_ctx)) {
 		v4l2_err(&jpeg->v4l2_dev, "Failed to init memory allocator\n");
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 3ffe2ec..3e9cdaf 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1143,11 +1143,13 @@ static int s5p_mfc_probe(struct platform_device *pdev)
 		}
 	}
 
+	vb2_dma_contig_set_max_seg_size(dev->mem_dev_l, DMA_BIT_MASK(32));
 	dev->alloc_ctx[0] = vb2_dma_contig_init_ctx(dev->mem_dev_l);
 	if (IS_ERR(dev->alloc_ctx[0])) {
 		ret = PTR_ERR(dev->alloc_ctx[0]);
 		goto err_res;
 	}
+	vb2_dma_contig_set_max_seg_size(dev->mem_dev_r, DMA_BIT_MASK(32));
 	dev->alloc_ctx[1] = vb2_dma_contig_init_ctx(dev->mem_dev_r);
 	if (IS_ERR(dev->alloc_ctx[1])) {
 		ret = PTR_ERR(dev->alloc_ctx[1]);
diff --git a/drivers/media/platform/s5p-tv/mixer_video.c b/drivers/media/platform/s5p-tv/mixer_video.c
index dc1c679..1d9c2d5 100644
--- a/drivers/media/platform/s5p-tv/mixer_video.c
+++ b/drivers/media/platform/s5p-tv/mixer_video.c
@@ -80,6 +80,7 @@ int mxr_acquire_video(struct mxr_device *mdev,
 		goto fail;
 	}
 
+	vb2_dma_contig_set_max_seg_size(mdev->dev, DMA_BIT_MASK(32));
 	mdev->alloc_ctx = vb2_dma_contig_init_ctx(mdev->dev);
 	if (IS_ERR(mdev->alloc_ctx)) {
 		mxr_err(mdev, "could not acquire vb2 allocator\n");
-- 
1.9.2

[PATCH v2 6/7] media: s5p-mfc: replace custom reserved memory init code with generic one

[Marek Szyprowski]

This patch removes custom code for initialization and handling of
reserved memory regions in s5p-mfc driver and replaces it with generic
named reserved memory regions specified in device tree.

s5p-mfc driver now handles two reserved memory regions: "left" and
"right", defined by generic reserved memory bindings. Support for non-dt
platform has been removed, because all supported platforms have been
converted to device tree.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c | 129 +++++++++++++++----------------
 1 file changed, 62 insertions(+), 67 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 3e9cdaf..3063449 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -22,6 +22,7 @@
 #include <media/v4l2-event.h>
 #include <linux/workqueue.h>
 #include <linux/of.h>
+#include <linux/of_reserved_mem.h>
 #include <media/videobuf2-v4l2.h>
 #include "s5p_mfc_common.h"
 #include "s5p_mfc_ctrl.h"
@@ -1022,55 +1023,67 @@ static const struct v4l2_file_operations s5p_mfc_fops = {
 	.mmap = s5p_mfc_mmap,
 };
 
-static int match_child(struct device *dev, void *data)
+/* DMA memory related helper functions */
+static void s5p_mfc_memdev_release(struct device *dev)
 {
-	if (!dev_name(dev))
-		return 0;
-	return !strcmp(dev_name(dev), (char *)data);
+	of_reserved_mem_device_release(dev);
 }
 
-static void *mfc_get_drv_data(struct platform_device *pdev);
-
-static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
+static struct device *s5p_mfc_alloc_memdev(struct device *dev, const char *name)
 {
-	unsigned int mem_info[2] = { };
+	struct device *child;
+	int ret;
 
-	dev->mem_dev_l = devm_kzalloc(&dev->plat_dev->dev,
-			sizeof(struct device), GFP_KERNEL);
-	if (!dev->mem_dev_l) {
-		mfc_err("Not enough memory\n");
-		return -ENOMEM;
-	}
-	device_initialize(dev->mem_dev_l);
-	of_property_read_u32_array(dev->plat_dev->dev.of_node,
-			"samsung,mfc-l", mem_info, 2);
-	if (dma_declare_coherent_memory(dev->mem_dev_l, mem_info[0],
-				mem_info[0], mem_info[1],
-				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) {
-		mfc_err("Failed to declare coherent memory for\n"
-		"MFC device\n");
-		return -ENOMEM;
+	child = devm_kzalloc(dev, sizeof(struct device), GFP_KERNEL);
+	if (!child)
+		return NULL;
+
+	device_initialize(child);
+	dev_set_name(child, "%s:%s", dev_name(dev), name);
+	child->parent = dev;
+	child->bus = dev->bus;
+	child->coherent_dma_mask = dev->coherent_dma_mask;
+	child->dma_mask = dev->dma_mask;
+	child->release = s5p_mfc_memdev_release;
+
+	if (device_add(child) == 0) {
+		ret = of_reserved_mem_init_by_name(child, dev->of_node, name);
+		if (ret == 0)
+			return child;
 	}
 
-	dev->mem_dev_r = devm_kzalloc(&dev->plat_dev->dev,
-			sizeof(struct device), GFP_KERNEL);
-	if (!dev->mem_dev_r) {
-		mfc_err("Not enough memory\n");
-		return -ENOMEM;
-	}
-	device_initialize(dev->mem_dev_r);
-	of_property_read_u32_array(dev->plat_dev->dev.of_node,
-			"samsung,mfc-r", mem_info, 2);
-	if (dma_declare_coherent_memory(dev->mem_dev_r, mem_info[0],
-				mem_info[0], mem_info[1],
-				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) {
-		pr_err("Failed to declare coherent memory for\n"
-		"MFC device\n");
-		return -ENOMEM;
+	put_device(child);
+	return NULL;
+}
+
+static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
+{
+	struct device *dev = &mfc_dev->plat_dev->dev;
+
+	/*
+	 * Create and initialize virtual devices for accessing
+	 * reserved memory regions.
+	 */
+	mfc_dev->mem_dev_l = s5p_mfc_alloc_memdev(dev, "left");
+	if (!mfc_dev->mem_dev_l)
+		return -ENODEV;
+	mfc_dev->mem_dev_r = s5p_mfc_alloc_memdev(dev, "right");
+	if (!mfc_dev->mem_dev_r) {
+		device_unregister(mfc_dev->mem_dev_l);
+		return -ENODEV;
 	}
+
 	return 0;
 }
 
+static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev)
+{
+	device_unregister(mfc_dev->mem_dev_l);
+	device_unregister(mfc_dev->mem_dev_r);
+}
+
+static void *mfc_get_drv_data(struct platform_device *pdev);
+
 /* MFC probe function */
 static int s5p_mfc_probe(struct platform_device *pdev)
 {
@@ -1096,12 +1109,6 @@ static int s5p_mfc_probe(struct platform_device *pdev)
 
 	dev->variant = mfc_get_drv_data(pdev);
 
-	ret = s5p_mfc_init_pm(dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to get mfc clock source\n");
-		return ret;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	dev->regs_base = devm_ioremap_resource(&pdev->dev, res);
@@ -1122,25 +1129,16 @@ static int s5p_mfc_probe(struct platform_device *pdev)
 		goto err_res;
 	}
 
-	if (pdev->dev.of_node) {
-		ret = s5p_mfc_alloc_memdevs(dev);
-		if (ret < 0)
-			goto err_res;
-	} else {
-		dev->mem_dev_l = device_find_child(&dev->plat_dev->dev,
-				"s5p-mfc-l", match_child);
-		if (!dev->mem_dev_l) {
-			mfc_err("Mem child (L) device get failed\n");
-			ret = -ENODEV;
-			goto err_res;
-		}
-		dev->mem_dev_r = device_find_child(&dev->plat_dev->dev,
-				"s5p-mfc-r", match_child);
-		if (!dev->mem_dev_r) {
-			mfc_err("Mem child (R) device get failed\n");
-			ret = -ENODEV;
-			goto err_res;
-		}
+	ret = s5p_mfc_configure_dma_memory(dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to configure DMA memory\n");
+		return ret;
+	}
+
+	ret = s5p_mfc_init_pm(dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get mfc clock source\n");
+		return ret;
 	}
 
 	vb2_dma_contig_set_max_seg_size(dev->mem_dev_l, DMA_BIT_MASK(32));
@@ -1274,10 +1272,7 @@ static int s5p_mfc_remove(struct platform_device *pdev)
 	s5p_mfc_release_firmware(dev);
 	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]);
 	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]);
-	if (pdev->dev.of_node) {
-		put_device(dev->mem_dev_l);
-		put_device(dev->mem_dev_r);
-	}
+	s5p_mfc_unconfigure_dma_memory(dev);
 
 	s5p_mfc_final_pm(dev);
 	return 0;
-- 
1.9.2

[PATCH v2 7/7] media: s5p-mfc: add iommu support

[Marek Szyprowski]

This patch adds support for IOMMU to s5p-mfc device driver. MFC firmware
is limited and it cannot use the default configuration. If IOMMU is
available, the patch disables the default DMA address space
configuration and creates a new address space of size limited to 256M
and base address set to 0x20000000.

For now the same address space is shared by both 'left' and 'right'
memory channels, because the DMA/IOMMU frameworks do not support
configuring them separately. This is not optimal, but besides limiting
total address space available has no other drawbacks (MFC firmware
supports 256M of address space per each channel).

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c       | 24 ++++++++
 drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h | 79 ++++++++++++++++++++++++++
 2 files changed, 103 insertions(+)
 create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 3063449..bae7c0f 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -30,6 +30,7 @@
 #include "s5p_mfc_dec.h"
 #include "s5p_mfc_enc.h"
 #include "s5p_mfc_intr.h"
+#include "s5p_mfc_iommu.h"
 #include "s5p_mfc_opr.h"
 #include "s5p_mfc_cmd.h"
 #include "s5p_mfc_pm.h"
@@ -1061,6 +1062,22 @@ static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
 	struct device *dev = &mfc_dev->plat_dev->dev;
 
 	/*
+	 * When IOMMU is available, we cannot use the default configuration,
+	 * because of MFC firmware requirements: address space limited to
+	 * 256M and non-zero default start address.
+	 * This is still simplified, not optimal configuration, but for now
+	 * IOMMU core doesn't allow to configure device's IOMMUs channel
+	 * separately.
+	 */
+	if (exynos_is_iommu_available(dev)) {
+		int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE,
+						 S5P_MFC_IOMMU_DMA_SIZE);
+		if (ret == 0)
+			mfc_dev->mem_dev_l = mfc_dev->mem_dev_r = dev;
+		return ret;
+	}
+
+	/*
 	 * Create and initialize virtual devices for accessing
 	 * reserved memory regions.
 	 */
@@ -1078,6 +1095,13 @@ static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
 
 static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev)
 {
+	struct device *dev = &mfc_dev->plat_dev->dev;
+
+	if (exynos_is_iommu_available(dev)) {
+		exynos_unconfigure_iommu(dev);
+		return;
+	}
+
 	device_unregister(mfc_dev->mem_dev_l);
 	device_unregister(mfc_dev->mem_dev_r);
 }
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h b/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h
new file mode 100644
index 0000000..5d1d1c2
--- /dev/null
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics Co.Ltd
+ * Authors: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef S5P_MFC_IOMMU_H_
+#define S5P_MFC_IOMMU_H_
+
+#define S5P_MFC_IOMMU_DMA_BASE	0x20000000lu
+#define S5P_MFC_IOMMU_DMA_SIZE	SZ_256M
+
+#ifdef CONFIG_EXYNOS_IOMMU
+
+#include <asm/dma-iommu.h>
+
+static inline bool exynos_is_iommu_available(struct device *dev)
+{
+	return dev->archdata.iommu != NULL;
+}
+
+static inline void exynos_unconfigure_iommu(struct device *dev)
+{
+	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
+
+	arm_iommu_detach_device(dev);
+	arm_iommu_release_mapping(mapping);
+}
+
+static inline int exynos_configure_iommu(struct device *dev,
+					 unsigned int base, unsigned int size)
+{
+	struct dma_iommu_mapping *mapping = NULL;
+	int ret;
+
+	/* Disable the default mapping created by device core */
+	if (to_dma_iommu_mapping(dev))
+		exynos_unconfigure_iommu(dev);
+
+	mapping = arm_iommu_create_mapping(dev->bus, base, size);
+	if (IS_ERR(mapping)) {
+		pr_warn("Failed to create IOMMU mapping for device %s\n",
+			dev_name(dev));
+		return PTR_ERR(mapping);
+	}
+
+	ret = arm_iommu_attach_device(dev, mapping);
+	if (ret) {
+		pr_warn("Failed to attached device %s to IOMMU_mapping\n",
+				dev_name(dev));
+		arm_iommu_release_mapping(mapping);
+		return ret;
+	}
+
+	return 0;
+}
+
+#else
+
+static inline bool exynos_is_iommu_available(struct device *dev)
+{
+	return false;
+}
+
+static inline int exynos_configure_iommu(struct device *dev,
+					 unsigned int base, unsigned int size)
+{
+	return -ENOSYS;
+}
+
+static inline void exynos_unconfigure_iommu(struct device *dev) { }
+
+#endif
+
+#endif /* S5P_MFC_IOMMU_H_ */
-- 
1.9.2

Re: [PATCH v2 2/7] ARM: dts: exynos4412-odroid*: enable MFC device

[Krzysztof Kozlowski]

On 09.12.2015 22:58, Marek Szyprowski wrote:
> Enable support for Multimedia Codec (MFC) device for all Exynos4412-based
> Odroid boards.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index edf0fc8..5825abf 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -18,6 +18,24 @@
>  		stdout-path = &serial_1;
>  	};
>  
> +	reserved-memory {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		mfc_left: region@77000000 {
> +			compatible = "shared-dma-pool";
> +			reusable;
> +			reg = <0x77000000 0x1000000>;

Doesn't this exceed the memory of Odroid X?

For other Exynos4412 boards the length is 0x800000. I am curious: any
particular reason for the difference?

Best regards,
Krzysztof

Re: [PATCH v2 2/7] ARM: dts: exynos4412-odroid*: enable MFC device

[Krzysztof Kozlowski]

On 10.12.2015 16:44, Krzysztof Kozlowski wrote:
> On 09.12.2015 22:58, Marek Szyprowski wrote:
>> Enable support for Multimedia Codec (MFC) device for all Exynos4412-based

... and one more finding: I think the abbreviation is Multi Format Codec.

BR,
Krzysztof

>> Odroid boards.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>>  arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 24 ++++++++++++++++++++++++
>>  1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> index edf0fc8..5825abf 100644
>> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> @@ -18,6 +18,24 @@
>>  		stdout-path = &serial_1;
>>  	};
>>  
>> +	reserved-memory {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		mfc_left: region@77000000 {
>> +			compatible = "shared-dma-pool";
>> +			reusable;
>> +			reg = <0x77000000 0x1000000>;
> 
> Doesn't this exceed the memory of Odroid X?
> 
> For other Exynos4412 boards the length is 0x800000. I am curious: any
> particular reason for the difference?
> 
> Best regards,
> Krzysztof
> 
> 

Re: [PATCH v2 0/7] Exynos: MFC driver: reserved memory cleanup and IOMMU support

[Laurent Pinchart]

Hi Marek,

Thank you for the patches.

On Wednesday 09 December 2015 14:58:15 Marek Szyprowski wrote:
> Hello,
> 
> This patchset finally perform cleanup of custom code in s5p-mfc codec
> driver. The first part is removal of custom, driver specific code for
> intializing and handling of reserved memory. Instead, a generic code for
> reserved memory regions is used.

Should you update the reserved memory bindings documentation 
(Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to 
document usage of the memory-region-names property ?

> Then, once it is done, the proper setup
> of DMA parameters (max segment size) is applied for all multimedia
> devices found on Exynos SoCs to let them properly handle shared buffers
> mapped into contiguous DMA address space. The last patch adds support
> for IOMMU to MFC driver. Some additional code is needed because of
> specific requirements of MFC device firmware (see patch 7 for more
> details). When no IOMMU is available, the code fallbacks to generic
> reserved memory regions.
> 
> After applying this patchset, MFC device works correctly when IOMMU is
> either enabled or disabled.
> 
> Patches have been tested on top of linux-next from 20151207. I would
> prefer to merge patches 1-2 via Samsung tree and patches 3-7 via media
> tree (there are no compile-time dependencies between patches 1-2 and
> 3-7). Patches have been tested on Odroid U3 (Exynos 4412 based) and
> Odroid XU3 (Exynos 5422 based) boards.
> 
> Best regards
> Marek Szyprowski
> Samsung R&D Institute Poland
> 
> 
> Changelog:
> v2:
> - reworked of_reserved_mem_init* functions on request from Rob Herring,
>   added separate index and name based selection of reserved region
> - adapted for of_reserved_mem_init* related changes
> 
> v1: https://www.mail-archive.com/linux-media@vger.kernel.org/msg94100.html
> - initial version of another approach for this problem, rewrote driver code
>   for new reserved memory bindings, which finally have been merged some
>   time ago
> 
> v0:
> http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/189259.ht
> ml - old patchset solving the same problem, abandoned due to other tasks and
> long time of merging reserved memory bindings and support code for it
> 
> Patch summary:
> 
> Marek Szyprowski (7):
>   ARM: Exynos: convert MFC device to generic reserved memory bindings
>   ARM: dts: exynos4412-odroid*: enable MFC device
>   of: reserved_mem: add support for named reserved mem nodes
>   media: vb2-dma-contig: add helper for setting dma max seg size
>   media: set proper max seg size for devices on Exynos SoCs
>   media: s5p-mfc: replace custom reserved memory init code with generic
>     one
>   media: s5p-mfc: add iommu support
> 
>  .../devicetree/bindings/media/s5p-mfc.txt          |  16 +--
>  arch/arm/boot/dts/exynos4210-origen.dts            |  22 ++-
>  arch/arm/boot/dts/exynos4210-smdkv310.dts          |  22 ++-
>  arch/arm/boot/dts/exynos4412-odroid-common.dtsi    |  24 ++++
>  arch/arm/boot/dts/exynos4412-origen.dts            |  22 ++-
>  arch/arm/boot/dts/exynos4412-smdk4412.dts          |  22 ++-
>  arch/arm/boot/dts/exynos5250-arndale.dts           |  22 ++-
>  arch/arm/boot/dts/exynos5250-smdk5250.dts          |  22 ++-
>  arch/arm/boot/dts/exynos5250-spring.dts            |  22 ++-
>  arch/arm/boot/dts/exynos5420-arndale-octa.dts      |  22 ++-
>  arch/arm/boot/dts/exynos5420-smdk5420.dts          |  22 ++-
>  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |  22 ++-
>  arch/arm/mach-exynos/Makefile                      |   2 -
>  arch/arm/mach-exynos/exynos.c                      |  19 ---
>  arch/arm/mach-exynos/mfc.h                         |  16 ---
>  arch/arm/mach-exynos/s5p-dev-mfc.c                 |  94 -------------
>  drivers/media/platform/exynos-gsc/gsc-core.c       |   1 +
>  drivers/media/platform/exynos4-is/fimc-core.c      |   1 +
>  drivers/media/platform/exynos4-is/fimc-is.c        |   1 +
>  drivers/media/platform/exynos4-is/fimc-lite.c      |   1 +
>  drivers/media/platform/s5p-g2d/g2d.c               |   1 +
>  drivers/media/platform/s5p-jpeg/jpeg-core.c        |   1 +
>  drivers/media/platform/s5p-mfc/s5p_mfc.c           | 153 ++++++++++--------
>  drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h     |  79 +++++++++++
>  drivers/media/platform/s5p-tv/mixer_video.c        |   1 +
>  drivers/media/v4l2-core/videobuf2-dma-contig.c     |  15 ++
>  drivers/of/of_reserved_mem.c                       | 104 +++++++++++---
>  include/linux/of_reserved_mem.h                    |  31 ++++-
>  include/media/videobuf2-dma-contig.h               |   1 +
>  29 files changed, 533 insertions(+), 248 deletions(-)
>  delete mode 100644 arch/arm/mach-exynos/mfc.h
>  delete mode 100644 arch/arm/mach-exynos/s5p-dev-mfc.c
>  create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h

-- 
Regards,

Laurent Pinchart

Re: [PATCH v2 4/7] media: vb2-dma-contig: add helper for setting dma max seg size

[Laurent Pinchart]

Hi Marek,

Thank you for the patch.

On Wednesday 09 December 2015 14:58:19 Marek Szyprowski wrote:
> Add a helper function for device drivers to set DMA's max_seg_size.
> Setting it to largest possible value lets DMA-mapping API always create
> contiguous mappings in DMA address space. This is essential for all
> devices, which use dma-contig videobuf2 memory allocator and shared
> buffers.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/media/v4l2-core/videobuf2-dma-contig.c | 15 +++++++++++++++
>  include/media/videobuf2-dma-contig.h           |  1 +
>  2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c
> b/drivers/media/v4l2-core/videobuf2-dma-contig.c index c331272..628518d
> 100644
> --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
> +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
> @@ -742,6 +742,21 @@ void vb2_dma_contig_cleanup_ctx(void *alloc_ctx)
>  }
>  EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx);
> 
> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size)
> +{
> +	if (!dev->dma_parms) {

When can this function be called with dev->dma_parms not NULL ?

> +		dev->dma_parms = devm_kzalloc(dev, sizeof(dev->dma_parms),
> +					      GFP_KERNEL);
> +		if (!dev->dma_parms)
> +			return -ENOMEM;
> +	}
> +	if (dma_get_max_seg_size(dev) < size)
> +		return dma_set_max_seg_size(dev, size);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size);
> +
>  MODULE_DESCRIPTION("DMA-contig memory handling routines for videobuf2");
>  MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>");
>  MODULE_LICENSE("GPL");
> diff --git a/include/media/videobuf2-dma-contig.h
> b/include/media/videobuf2-dma-contig.h index c33dfa6..0e6ba64 100644
> --- a/include/media/videobuf2-dma-contig.h
> +++ b/include/media/videobuf2-dma-contig.h
> @@ -26,6 +26,7 @@ vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb,
> unsigned int plane_no)
> 
>  void *vb2_dma_contig_init_ctx(struct device *dev);
>  void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size);
> 
>  extern const struct vb2_mem_ops vb2_dma_contig_memops;

-- 
Regards,

Laurent Pinchart

Re: [PATCH v2 4/7] media: vb2-dma-contig: add helper for setting dma max seg size

[Marek Szyprowski]

Hello,

On 2015-12-13 20:57, Laurent Pinchart wrote:
> Hi Marek,
>
> Thank you for the patch.
>
> On Wednesday 09 December 2015 14:58:19 Marek Szyprowski wrote:
>> Add a helper function for device drivers to set DMA's max_seg_size.
>> Setting it to largest possible value lets DMA-mapping API always create
>> contiguous mappings in DMA address space. This is essential for all
>> devices, which use dma-contig videobuf2 memory allocator and shared
>> buffers.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>>   drivers/media/v4l2-core/videobuf2-dma-contig.c | 15 +++++++++++++++
>>   include/media/videobuf2-dma-contig.h           |  1 +
>>   2 files changed, 16 insertions(+)
>>
>> diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c
>> b/drivers/media/v4l2-core/videobuf2-dma-contig.c index c331272..628518d
>> 100644
>> --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
>> +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
>> @@ -742,6 +742,21 @@ void vb2_dma_contig_cleanup_ctx(void *alloc_ctx)
>>   }
>>   EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx);
>>
>> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size)
>> +{
>> +	if (!dev->dma_parms) {
> When can this function be called with dev->dma_parms not NULL ?

When one loads a module with multimedia driver (which calls this 
function), then
unloads and loads it again. It is rather safe to have this check.

>> +		dev->dma_parms = devm_kzalloc(dev, sizeof(dev->dma_parms),
>> +					      GFP_KERNEL);
>> +		if (!dev->dma_parms)
>> +			return -ENOMEM;
>> +	}
>> +	if (dma_get_max_seg_size(dev) < size)
>> +		return dma_set_max_seg_size(dev, size);
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size);
>> +
>>   MODULE_DESCRIPTION("DMA-contig memory handling routines for videobuf2");
>>   MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>");
>>   MODULE_LICENSE("GPL");
>> diff --git a/include/media/videobuf2-dma-contig.h
>> b/include/media/videobuf2-dma-contig.h index c33dfa6..0e6ba64 100644
>> --- a/include/media/videobuf2-dma-contig.h
>> +++ b/include/media/videobuf2-dma-contig.h
>> @@ -26,6 +26,7 @@ vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb,
>> unsigned int plane_no)
>>
>>   void *vb2_dma_contig_init_ctx(struct device *dev);
>>   void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
>> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size);
>>
>>   extern const struct vb2_mem_ops vb2_dma_contig_memops;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v2 0/7] Exynos: MFC driver: reserved memory cleanup and IOMMU support

[Marek Szyprowski]

Hello,

On 2015-12-13 20:52, Laurent Pinchart wrote:
> Hi Marek,
>
> Thank you for the patches.
>
> On Wednesday 09 December 2015 14:58:15 Marek Szyprowski wrote:
>> Hello,
>>
>> This patchset finally perform cleanup of custom code in s5p-mfc codec
>> driver. The first part is removal of custom, driver specific code for
>> intializing and handling of reserved memory. Instead, a generic code for
>> reserved memory regions is used.
> Should you update the reserved memory bindings documentation
> (Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to
> document usage of the memory-region-names property ?

Okay, I will update documentation as well.

>> Then, once it is done, the proper setup
>> of DMA parameters (max segment size) is applied for all multimedia
>> devices found on Exynos SoCs to let them properly handle shared buffers
>> mapped into contiguous DMA address space. The last patch adds support
>> for IOMMU to MFC driver. Some additional code is needed because of
>> specific requirements of MFC device firmware (see patch 7 for more
>> details). When no IOMMU is available, the code fallbacks to generic
>> reserved memory regions.
>>
>> After applying this patchset, MFC device works correctly when IOMMU is
>> either enabled or disabled.
>>
>> Patches have been tested on top of linux-next from 20151207. I would
>> prefer to merge patches 1-2 via Samsung tree and patches 3-7 via media
>> tree (there are no compile-time dependencies between patches 1-2 and
>> 3-7). Patches have been tested on Odroid U3 (Exynos 4412 based) and
>> Odroid XU3 (Exynos 5422 based) boards.
>>
>> Best regards
>> Marek Szyprowski
>> Samsung R&D Institute Poland
>>
>>
>> Changelog:
>> v2:
>> - reworked of_reserved_mem_init* functions on request from Rob Herring,
>>    added separate index and name based selection of reserved region
>> - adapted for of_reserved_mem_init* related changes
>>
>> v1: https://www.mail-archive.com/linux-media@vger.kernel.org/msg94100.html
>> - initial version of another approach for this problem, rewrote driver code
>>    for new reserved memory bindings, which finally have been merged some
>>    time ago
>>
>> v0:
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/189259.ht
>> ml - old patchset solving the same problem, abandoned due to other tasks and
>> long time of merging reserved memory bindings and support code for it
>>
>> Patch summary:
>>
>> Marek Szyprowski (7):
>>    ARM: Exynos: convert MFC device to generic reserved memory bindings
>>    ARM: dts: exynos4412-odroid*: enable MFC device
>>    of: reserved_mem: add support for named reserved mem nodes
>>    media: vb2-dma-contig: add helper for setting dma max seg size
>>    media: set proper max seg size for devices on Exynos SoCs
>>    media: s5p-mfc: replace custom reserved memory init code with generic
>>      one
>>    media: s5p-mfc: add iommu support
>>
>>   .../devicetree/bindings/media/s5p-mfc.txt          |  16 +--
>>   arch/arm/boot/dts/exynos4210-origen.dts            |  22 ++-
>>   arch/arm/boot/dts/exynos4210-smdkv310.dts          |  22 ++-
>>   arch/arm/boot/dts/exynos4412-odroid-common.dtsi    |  24 ++++
>>   arch/arm/boot/dts/exynos4412-origen.dts            |  22 ++-
>>   arch/arm/boot/dts/exynos4412-smdk4412.dts          |  22 ++-
>>   arch/arm/boot/dts/exynos5250-arndale.dts           |  22 ++-
>>   arch/arm/boot/dts/exynos5250-smdk5250.dts          |  22 ++-
>>   arch/arm/boot/dts/exynos5250-spring.dts            |  22 ++-
>>   arch/arm/boot/dts/exynos5420-arndale-octa.dts      |  22 ++-
>>   arch/arm/boot/dts/exynos5420-smdk5420.dts          |  22 ++-
>>   arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |  22 ++-
>>   arch/arm/mach-exynos/Makefile                      |   2 -
>>   arch/arm/mach-exynos/exynos.c                      |  19 ---
>>   arch/arm/mach-exynos/mfc.h                         |  16 ---
>>   arch/arm/mach-exynos/s5p-dev-mfc.c                 |  94 -------------
>>   drivers/media/platform/exynos-gsc/gsc-core.c       |   1 +
>>   drivers/media/platform/exynos4-is/fimc-core.c      |   1 +
>>   drivers/media/platform/exynos4-is/fimc-is.c        |   1 +
>>   drivers/media/platform/exynos4-is/fimc-lite.c      |   1 +
>>   drivers/media/platform/s5p-g2d/g2d.c               |   1 +
>>   drivers/media/platform/s5p-jpeg/jpeg-core.c        |   1 +
>>   drivers/media/platform/s5p-mfc/s5p_mfc.c           | 153 ++++++++++--------
>>   drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h     |  79 +++++++++++
>>   drivers/media/platform/s5p-tv/mixer_video.c        |   1 +
>>   drivers/media/v4l2-core/videobuf2-dma-contig.c     |  15 ++
>>   drivers/of/of_reserved_mem.c                       | 104 +++++++++++---
>>   include/linux/of_reserved_mem.h                    |  31 ++++-
>>   include/media/videobuf2-dma-contig.h               |   1 +
>>   29 files changed, 533 insertions(+), 248 deletions(-)
>>   delete mode 100644 arch/arm/mach-exynos/mfc.h
>>   delete mode 100644 arch/arm/mach-exynos/s5p-dev-mfc.c
>>   create mode 100644 drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Re: [PATCH v2 4/7] media: vb2-dma-contig: add helper for setting dma max seg size

[Laurent Pinchart]

Hi Marek,

On Monday 14 December 2015 10:20:22 Marek Szyprowski wrote:
> On 2015-12-13 20:57, Laurent Pinchart wrote:
> > On Wednesday 09 December 2015 14:58:19 Marek Szyprowski wrote:
> >> Add a helper function for device drivers to set DMA's max_seg_size.
> >> Setting it to largest possible value lets DMA-mapping API always create
> >> contiguous mappings in DMA address space. This is essential for all
> >> devices, which use dma-contig videobuf2 memory allocator and shared
> >> buffers.
> >> 
> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> >> ---
> >> 
> >>   drivers/media/v4l2-core/videobuf2-dma-contig.c | 15 +++++++++++++++
> >>   include/media/videobuf2-dma-contig.h           |  1 +
> >>   2 files changed, 16 insertions(+)
> >> 
> >> diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c
> >> b/drivers/media/v4l2-core/videobuf2-dma-contig.c index c331272..628518d
> >> 100644
> >> --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
> >> +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
> >> @@ -742,6 +742,21 @@ void vb2_dma_contig_cleanup_ctx(void *alloc_ctx)
> >> 
> >>   }
> >>   EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx);
> >> 
> >> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int
> >> size)
> >> +{
> >> +	if (!dev->dma_parms) {
> > 
> > When can this function be called with dev->dma_parms not NULL ?
> 
> When one loads a module with multimedia driver (which calls this
> function), then unloads and loads it again. It is rather safe to have this
> check.

Don't you have a much bigger problem in that case ? When you unload the module 
the device will be unbound from the driver, causing the memory allocated by 
devm_kzalloc to be freed. dev->dma_parms will then point to freed memory, 
which will get reused by all subsequent calls to dma_get_max_seg_size(), 
dma_get_max_seg_size() & co (including the ones in this function).

> >> +		dev->dma_parms = devm_kzalloc(dev, sizeof(dev->dma_parms),
> >> +					      GFP_KERNEL);
> >> +		if (!dev->dma_parms)
> >> +			return -ENOMEM;
> >> +	}
> >> +	if (dma_get_max_seg_size(dev) < size)
> >> +		return dma_set_max_seg_size(dev, size);
> >> +
> >> +	return 0;
> >> +}
> >> +EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size);
> >> +
> >>   MODULE_DESCRIPTION("DMA-contig memory handling routines for
> >>   videobuf2");
> >>   MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>");
> >>   MODULE_LICENSE("GPL");
> >> diff --git a/include/media/videobuf2-dma-contig.h
> >> b/include/media/videobuf2-dma-contig.h index c33dfa6..0e6ba64 100644
> >> --- a/include/media/videobuf2-dma-contig.h
> >> +++ b/include/media/videobuf2-dma-contig.h
> >> @@ -26,6 +26,7 @@ vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb,
> >> unsigned int plane_no)
> >>  void *vb2_dma_contig_init_ctx(struct device *dev);
> >>  void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
> >> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int
> >> size);
> >>  extern const struct vb2_mem_ops vb2_dma_contig_memops;

-- 
Regards,

Laurent Pinchart

Re: [PATCH v2 4/7] media: vb2-dma-contig: add helper for setting dma max seg size

[Marek Szyprowski]

Hi Laurent,

On 2015-12-14 16:50, Laurent Pinchart wrote:
> Hi Marek,
>
> On Monday 14 December 2015 10:20:22 Marek Szyprowski wrote:
>> On 2015-12-13 20:57, Laurent Pinchart wrote:
>>> On Wednesday 09 December 2015 14:58:19 Marek Szyprowski wrote:
>>>> Add a helper function for device drivers to set DMA's max_seg_size.
>>>> Setting it to largest possible value lets DMA-mapping API always create
>>>> contiguous mappings in DMA address space. This is essential for all
>>>> devices, which use dma-contig videobuf2 memory allocator and shared
>>>> buffers.
>>>>
>>>> Signed-off-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>>>> ---
>>>>
>>>>    drivers/media/v4l2-core/videobuf2-dma-contig.c | 15 +++++++++++++++
>>>>    include/media/videobuf2-dma-contig.h           |  1 +
>>>>    2 files changed, 16 insertions(+)
>>>>
>>>> diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c
>>>> b/drivers/media/v4l2-core/videobuf2-dma-contig.c index c331272..628518d
>>>> 100644
>>>> --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
>>>> +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
>>>> @@ -742,6 +742,21 @@ void vb2_dma_contig_cleanup_ctx(void *alloc_ctx)
>>>>
>>>>    }
>>>>    EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx);
>>>>
>>>> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int
>>>> size)
>>>> +{
>>>> +	if (!dev->dma_parms) {
>>> When can this function be called with dev->dma_parms not NULL ?
>> When one loads a module with multimedia driver (which calls this
>> function), then unloads and loads it again. It is rather safe to have this
>> check.
> Don't you have a much bigger problem in that case ? When you unload the module
> the device will be unbound from the driver, causing the memory allocated by
> devm_kzalloc to be freed. dev->dma_parms will then point to freed memory,
> which will get reused by all subsequent calls to dma_get_max_seg_size(),
> dma_get_max_seg_size() & co (including the ones in this function).

You are right. I've thought that devm resources are freed on device 
release not
driver remove. Then probably the safest fix is to change devm_kzalloc 
back to
kzalloc.

>>>> +		dev->dma_parms = devm_kzalloc(dev, sizeof(dev->dma_parms),
>>>> +					      GFP_KERNEL);
>>>> +		if (!dev->dma_parms)
>>>> +			return -ENOMEM;
>>>> +	}
>>>> +	if (dma_get_max_seg_size(dev) < size)
>>>> +		return dma_set_max_seg_size(dev, size);
>>>> +
>>>> +	return 0;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size);
>>>> +
>>>>    MODULE_DESCRIPTION("DMA-contig memory handling routines for
>>>>    videobuf2");
>>>>    MODULE_AUTHOR("Pawel Osciak <pawel-FA/gS7QP4orQT0dZR+AlfA@public.gmane.org>");
>>>>    MODULE_LICENSE("GPL");
>>>> diff --git a/include/media/videobuf2-dma-contig.h
>>>> b/include/media/videobuf2-dma-contig.h index c33dfa6..0e6ba64 100644
>>>> --- a/include/media/videobuf2-dma-contig.h
>>>> +++ b/include/media/videobuf2-dma-contig.h
>>>> @@ -26,6 +26,7 @@ vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb,
>>>> unsigned int plane_no)
>>>>   void *vb2_dma_contig_init_ctx(struct device *dev);
>>>>   void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
>>>> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int
>>>> size);
>>>>   extern const struct vb2_mem_ops vb2_dma_contig_memops;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/7] media: vb2-dma-contig: add helper for setting dma max seg size

[Marek Szyprowski]

Hi Laurent,

On 2015-12-14 16:50, Laurent Pinchart wrote:
> Hi Marek,
>
> On Monday 14 December 2015 10:20:22 Marek Szyprowski wrote:
>> On 2015-12-13 20:57, Laurent Pinchart wrote:
>>> On Wednesday 09 December 2015 14:58:19 Marek Szyprowski wrote:
>>>> Add a helper function for device drivers to set DMA's max_seg_size.
>>>> Setting it to largest possible value lets DMA-mapping API always create
>>>> contiguous mappings in DMA address space. This is essential for all
>>>> devices, which use dma-contig videobuf2 memory allocator and shared
>>>> buffers.
>>>>
>>>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>>>> ---
>>>>
>>>>    drivers/media/v4l2-core/videobuf2-dma-contig.c | 15 +++++++++++++++
>>>>    include/media/videobuf2-dma-contig.h           |  1 +
>>>>    2 files changed, 16 insertions(+)
>>>>
>>>> diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c
>>>> b/drivers/media/v4l2-core/videobuf2-dma-contig.c index c331272..628518d
>>>> 100644
>>>> --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
>>>> +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
>>>> @@ -742,6 +742,21 @@ void vb2_dma_contig_cleanup_ctx(void *alloc_ctx)
>>>>
>>>>    }
>>>>    EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx);
>>>>
>>>> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int
>>>> size)
>>>> +{
>>>> +	if (!dev->dma_parms) {
>>> When can this function be called with dev->dma_parms not NULL ?
>> When one loads a module with multimedia driver (which calls this
>> function), then unloads and loads it again. It is rather safe to have this
>> check.
> Don't you have a much bigger problem in that case ? When you unload the module
> the device will be unbound from the driver, causing the memory allocated by
> devm_kzalloc to be freed. dev->dma_parms will then point to freed memory,
> which will get reused by all subsequent calls to dma_get_max_seg_size(),
> dma_get_max_seg_size() & co (including the ones in this function).

You are right. I've thought that devm resources are freed on device 
release not
driver remove. Then probably the safest fix is to change devm_kzalloc 
back to
kzalloc.

>>>> +		dev->dma_parms = devm_kzalloc(dev, sizeof(dev->dma_parms),
>>>> +					      GFP_KERNEL);
>>>> +		if (!dev->dma_parms)
>>>> +			return -ENOMEM;
>>>> +	}
>>>> +	if (dma_get_max_seg_size(dev) < size)
>>>> +		return dma_set_max_seg_size(dev, size);
>>>> +
>>>> +	return 0;
>>>> +}
>>>> +EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size);
>>>> +
>>>>    MODULE_DESCRIPTION("DMA-contig memory handling routines for
>>>>    videobuf2");
>>>>    MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>");
>>>>    MODULE_LICENSE("GPL");
>>>> diff --git a/include/media/videobuf2-dma-contig.h
>>>> b/include/media/videobuf2-dma-contig.h index c33dfa6..0e6ba64 100644
>>>> --- a/include/media/videobuf2-dma-contig.h
>>>> +++ b/include/media/videobuf2-dma-contig.h
>>>> @@ -26,6 +26,7 @@ vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb,
>>>> unsigned int plane_no)
>>>>   void *vb2_dma_contig_init_ctx(struct device *dev);
>>>>   void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
>>>> +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int
>>>> size);
>>>>   extern const struct vb2_mem_ops vb2_dma_contig_memops;

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland