kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Itaru Kitayama]

Hi,
I have been trying to test one of the recent tags in kvmarm git tree,
kvm-arm-for-4.2, 4.3, and v4.4-rc6 on Mustang, but none of them seem
to enter the linux boot process. Has anyone verified any of these work
on Mustang? If so can I have a working .config to continue testing?

Itaru

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Christoffer Dall]

On Tue, Dec 22, 2015 at 06:33:26PM +0900, Itaru Kitayama wrote:
> Hi,
> I have been trying to test one of the recent tags in kvmarm git tree,
> kvm-arm-for-4.2, 4.3, and v4.4-rc6 on Mustang, but none of them seem
> to enter the linux boot process. Has anyone verified any of these work
> on Mustang? If so can I have a working .config to continue testing?
> 
Just use mainline tags instead of the kvm-arm-specific ones.

Any recent kernel, like v4.3 or v4.4-rc6 boots just fine on my Mustang
with defconfig.

-Christoffer

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Itaru Kitayama]

Hi Christoffer,
I don't see those mainline tags you mentioned in the tree.

Itaru

On 12/22/15 11:41 PM, Christoffer Dall wrote:
> On Tue, Dec 22, 2015 at 06:33:26PM +0900, Itaru Kitayama wrote:
>> Hi,
>> I have been trying to test one of the recent tags in kvmarm git tree,
>> kvm-arm-for-4.2, 4.3, and v4.4-rc6 on Mustang, but none of them seem
>> to enter the linux boot process. Has anyone verified any of these work
>> on Mustang? If so can I have a working .config to continue testing?
>>
> Just use mainline tags instead of the kvm-arm-specific ones.
>
> Any recent kernel, like v4.3 or v4.4-rc6 boots just fine on my Mustang
> with defconfig.
>
> -Christoffer

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Itaru Kitayama]

Hi Christoffer,
After some investigations, it seems newer kernels does not boot on the
Mustang board which I have access (in the Linaro Server Lab).

I am using the Fedora 23 userland, 4.2.x Fedora kernels do boot, but
4.4.x Fedora kernels do not (they are downloaded from the Koji site or
own-built ones using fedpkg). I am not sure at this moment, the F/W
is too old or not.

Itaru

On 12/22/15 11:41 PM, Christoffer Dall wrote:
> On Tue, Dec 22, 2015 at 06:33:26PM +0900, Itaru Kitayama wrote:
>> Hi,
>> I have been trying to test one of the recent tags in kvmarm git tree,
>> kvm-arm-for-4.2, 4.3, and v4.4-rc6 on Mustang, but none of them seem
>> to enter the linux boot process. Has anyone verified any of these work
>> on Mustang? If so can I have a working .config to continue testing?
>>
> Just use mainline tags instead of the kvm-arm-specific ones.
>
> Any recent kernel, like v4.3 or v4.4-rc6 boots just fine on my Mustang
> with defconfig.
>
> -Christoffer

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Christoffer Dall]

On Fri, Dec 25, 2015 at 07:50:13PM +0900, Itaru Kitayama wrote:
> Hi Christoffer,
> After some investigations, it seems newer kernels does not boot on the
> Mustang board which I have access (in the Linaro Server Lab).
> 
> I am using the Fedora 23 userland, 4.2.x Fedora kernels do boot, but
> 4.4.x Fedora kernels do not (they are downloaded from the Koji site or
> own-built ones using fedpkg). I am not sure at this moment, the F/W
> is too old or not.
> 
I don't know anything about distro kernels, I only follow mainline and
just booted mainline just fine on my mustang.

-Christoffer

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Christoffer Dall]

On Wed, Dec 23, 2015 at 07:15:26AM +0900, Itaru Kitayama wrote:
> Hi Christoffer,
> I don't see those mainline tags you mentioned in the tree.
> 
I don't think we push mainline tags to the kvmarm tree; you can fetch
those directly from Linus' tree.

-Christoffer

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Itaru Kitayama]

Does your Mustang boot via UEFI? Mine does. Mainline v4.4-rc6ish
seems to have an issue with libstub.

On 12/27/15 11:33 PM, Christoffer Dall wrote:
> On Fri, Dec 25, 2015 at 07:50:13PM +0900, Itaru Kitayama wrote:
>> Hi Christoffer,
>> After some investigations, it seems newer kernels does not boot on the
>> Mustang board which I have access (in the Linaro Server Lab).
>>
>> I am using the Fedora 23 userland, 4.2.x Fedora kernels do boot, but
>> 4.4.x Fedora kernels do not (they are downloaded from the Koji site or
>> own-built ones using fedpkg). I am not sure at this moment, the F/W
>> is too old or not.
>>
> I don't know anything about distro kernels, I only follow mainline and
> just booted mainline just fine on my mustang.
>
> -Christoffer

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Christoffer Dall]

On Mon, Dec 28, 2015 at 07:33:01AM +0900, Itaru Kitayama wrote:
> Does your Mustang boot via UEFI? Mine does. Mainline v4.4-rc6ish
> seems to have an issue with libstub.
> 
No, I use u-boot.

Sorry I can't be of any help then.

-Christoffer

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Andrew Jones]

On Mon, Dec 28, 2015 at 07:33:01AM +0900, Itaru Kitayama wrote:
> Does your Mustang boot via UEFI? Mine does. Mainline v4.4-rc6ish
> seems to have an issue with libstub.

FWIW, 4.4.0-0.rc6.git1.1.fc24.aarch64 boots fine for me (with f23 userspace)
My firmware is a pretty old build though

TianoCore 1.1.0 UEFI 2.4.0 Apr 22 2015 11:30:25
CPU: APM ARM 64-bit Potenza Rev A3 2400MHz PCP 2400MHz
     32 KB ICACHE, 32 KB DCACHE
     SOC 2000MHz IOBAXI 400MHz AXI 250MHz AHB 200MHz GFC 125MHz
Board: X-Gene Mustang Board
Slimpro FW:
        Ver: 2.1

Thanks,
drew

> 
> On 12/27/15 11:33 PM, Christoffer Dall wrote:
> >On Fri, Dec 25, 2015 at 07:50:13PM +0900, Itaru Kitayama wrote:
> >>Hi Christoffer,
> >>After some investigations, it seems newer kernels does not boot on the
> >>Mustang board which I have access (in the Linaro Server Lab).
> >>
> >>I am using the Fedora 23 userland, 4.2.x Fedora kernels do boot, but
> >>4.4.x Fedora kernels do not (they are downloaded from the Koji site or
> >>own-built ones using fedpkg). I am not sure at this moment, the F/W
> >>is too old or not.
> >>
> >I don't know anything about distro kernels, I only follow mainline and
> >just booted mainline just fine on my mustang.
> >
> >-Christoffer
> 
> _______________________________________________
> kvmarm mailing list
> kvmarm@lists.cs.columbia.edu
> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: kvmarm tags kvm-arm-for-4.2, 4.3, and v4.4-rc6 does not boot on Mustang

[Itaru Kitayama]

Using newer F/W, I was just able to boot a 4.4.0 kernel with KVM.

[    0.669879] kvm [1]: interrupt-controller@780c0000 IRQ5
[    0.674062] kvm [1]: timer IRQ3
[    0.676033] kvm [1]: 8-bit VMID
[    0.677961] kvm [1]: Hyp mode initialized successfully

Itaru

On 12/29/15 11:53 PM, Christoffer Dall wrote:
> On Mon, Dec 28, 2015 at 07:33:01AM +0900, Itaru Kitayama wrote:
>> Does your Mustang boot via UEFI? Mine does. Mainline v4.4-rc6ish
>> seems to have an issue with libstub.
>>
> No, I use u-boot.
>
> Sorry I can't be of any help then.
>
> -Christoffer