* Qualcomm Atheros Device 0042 (rev 30) @ 2016-01-06 19:43 vagner 2016-01-07 5:39 ` Hsu, Ryan 0 siblings, 1 reply; 10+ messages in thread From: vagner @ 2016-01-06 19:43 UTC (permalink / raw) To: ath10k I Have a new laptop: Lenovo ideapad 300-15 Intel i5 6th generation Running Debian Stretch/Testing. And my wireless card does not work. I have tried all sort of solutions. Including compiling with backports. But, my kernel is new, using the same backports new version. How can I make this nightmare card work in my machine? Please, help. uname -a 4.3.0-1-amd64 #1 SMP Debian 4.3.3-2 (2015-12-17) x86_64 GNU/Linux lspci > 02:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30) lshw -C network > *-network UNCLAIMED > description: Network controller > product: Qualcomm Atheros > vendor: Qualcomm Atheros > physical id: 0 > bus info: pci@0000:02:00.0 > version: 30 > width: 64 bits > clock: 33MHz > capabilities: pm msi pciexpress bus_master cap_list > configuration: latency=0 > resources: memory:a1000000-a11fffff Thx _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: Qualcomm Atheros Device 0042 (rev 30) 2016-01-06 19:43 Qualcomm Atheros Device 0042 (rev 30) vagner @ 2016-01-07 5:39 ` Hsu, Ryan 2016-01-07 10:20 ` vagner [not found] ` <CAGf2gkO_je4Q=0_RsYTQZtRorZU3U5fhoj+6+9gH5mFvNy1vFg@mail.gmail.com> 0 siblings, 2 replies; 10+ messages in thread From: Hsu, Ryan @ 2016-01-07 5:39 UTC (permalink / raw) To: vagner, ath10k Can you try this firmware? git clone https://github.com/kvalo/ath10k-firmware.git sudo cp -r ./ath10k-firmware/QCA9377/ /lib/firmware/ath10k/ sudo ln -s /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin_WLAN.TF.1.0-00267-1 /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin Otherwise a full dmesg log might be helpful to see what is the failure. Ryan > -----Original Message----- > From: ath10k [mailto:ath10k-bounces@lists.infradead.org] On Behalf Of > vagner > Sent: Wednesday, January 06, 2016 11:43 AM > To: ath10k@lists.infradead.org > Subject: Qualcomm Atheros Device 0042 (rev 30) > > I Have a new laptop: > > Lenovo ideapad 300-15 > Intel i5 6th generation > > Running Debian Stretch/Testing. And my wireless card does not work. I have > tried all sort of solutions. Including compiling with backports. > But, my kernel is new, using the same backports new version. > How can I make this nightmare card work in my machine? Please, help. > > uname -a > > 4.3.0-1-amd64 #1 SMP Debian 4.3.3-2 (2015-12-17) x86_64 GNU/Linux > > lspci > > 02:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30) > > lshw -C network > > > *-network UNCLAIMED > > description: Network controller > > product: Qualcomm Atheros > > vendor: Qualcomm Atheros > > physical id: 0 > > bus info: pci@0000:02:00.0 > > version: 30 > > width: 64 bits > > clock: 33MHz > > capabilities: pm msi pciexpress bus_master cap_list > > configuration: latency=0 > > resources: memory:a1000000-a11fffff > > Thx > > > _______________________________________________ > ath10k mailing list > ath10k@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/ath10k _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Qualcomm Atheros Device 0042 (rev 30) 2016-01-07 5:39 ` Hsu, Ryan @ 2016-01-07 10:20 ` vagner 2016-01-07 11:20 ` Michal Kazior [not found] ` <CAGf2gkO_je4Q=0_RsYTQZtRorZU3U5fhoj+6+9gH5mFvNy1vFg@mail.gmail.com> 1 sibling, 1 reply; 10+ messages in thread From: vagner @ 2016-01-07 10:20 UTC (permalink / raw) To: ath10k I have tried this before and did not work :( My dmesg is here: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160101 (Debian 5.3.1-5) ) #1 SMP Debian 4.3.3-5 (2016-01-04) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=9b688b36-f8c5-411b-abf3-f5cf5f78ca7e ro quiet [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040 [ 0.000000] x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 0x440 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000073c9dfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000073c9e000-0x0000000073c9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000073c9f000-0x0000000073cc8fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000073cc9000-0x0000000073d78fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000073d79000-0x0000000074678fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000074679000-0x000000008558dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008558e000-0x0000000085f7dfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000085f7e000-0x0000000087f7dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000087f7e000-0x0000000087ffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x00000000880fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000089000000-0x000000008c7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002727fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO 80Q7/Paris 5A8, BIOS D5CN28WW 08/13/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x272800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0087FFF000 mask 7FFFFFF000 uncachable [ 0.000000] 2 base 0088000000 mask 7FF8000000 uncachable [ 0.000000] 3 base 0090000000 mask 7FF0000000 uncachable [ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0x87fff000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01d24000, 0x01d24fff] PGTABLE [ 0.000000] BRK [0x01d25000, 0x01d25fff] PGTABLE [ 0.000000] BRK [0x01d26000, 0x01d26fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x272600000-0x2727fffff] [ 0.000000] [mem 0x272600000-0x2727fffff] page 2M [ 0.000000] BRK [0x01d27000, 0x01d27fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x260000000-0x2725fffff] [ 0.000000] [mem 0x260000000-0x2725fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x240000000-0x25fffffff] [ 0.000000] [mem 0x240000000-0x25fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x73c9dfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x73bfffff] page 2M [ 0.000000] [mem 0x73c00000-0x73c9dfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x73cc9000-0x73d78fff] [ 0.000000] [mem 0x73cc9000-0x73d78fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x74679000-0x8558dfff] [ 0.000000] [mem 0x74679000-0x747fffff] page 4k [ 0.000000] [mem 0x74800000-0x853fffff] page 2M [ 0.000000] [mem 0x85400000-0x8558dfff] page 4k [ 0.000000] BRK [0x01d28000, 0x01d28fff] PGTABLE [ 0.000000] BRK [0x01d29000, 0x01d29fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x87ffe000-0x87ffefff] [ 0.000000] [mem 0x87ffe000-0x87ffefff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x23fffffff] [ 0.000000] [mem 0x100000000-0x23fffffff] page 1G [ 0.000000] RAMDISK: [mem 0x376a2000-0x37b48fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x0000000087FCB188 0000EC (v01 LENOVO CB-01 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000087FEB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x0000000087FD0000 016943 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FACS 0x0000000087F4E000 000040 [ 0.000000] ACPI: SSDT 0x0000000087FC9000 000E58 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FCA000 000B39 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FCC000 002BAE (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FCF000 0002D4 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x0000000087FE7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x0000000087FE8000 0000BC (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: LPIT 0x0000000087FE9000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 0x0000000087FEA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DBGP 0x0000000087FEC000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x0000000087FED000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 0x0000000087FEE000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 0x0000000087FEF000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DBG2 0x0000000087FF0000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DBGP 0x0000000087FF1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FF2000 0030B3 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: POAT 0x0000000087FF6000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: TPM2 0x0000000087FF7000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FF8000 00004B (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FF9000 0004B7 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x0000000087FFA000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x0000000087FFB000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: TCPA 0x0000000087FFC000 000032 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DMAR 0x0000000087FC8000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x0000000087FC7000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002727fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x2727f8000-0x2727fbfff] [ 0.000000] [ffffea0000000000-ffffea0009dfffff] PMD -> [ffff880269e00000-ffff880271dfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002727fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000073c9dfff] [ 0.000000] node 0: [mem 0x0000000073cc9000-0x0000000073d78fff] [ 0.000000] node 0: [mem 0x0000000074679000-0x000000008558dfff] [ 0.000000] node 0: [mem 0x0000000087ffe000-0x0000000087ffefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002727fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002727fffff] [ 0.000000] On node 0 totalpages: 2061313 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8434 pages used for memmap [ 0.000000] DMA32 zone: 539748 pages, LIFO batch:31 [ 0.000000] Normal zone: 23712 pages used for memmap [ 0.000000] Normal zone: 1517568 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x8a800000-0x8c7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x73c9e000-0x73c9efff] [ 0.000000] PM: Registered nosave memory: [mem 0x73c9f000-0x73cc8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x73d79000-0x74678fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8558e000-0x85f7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x85f7e000-0x87f7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x87f7e000-0x87ffdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x87fff000-0x880fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8c7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c800000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa10000-0xffffffff] [ 0.000000] e820: [mem 0x8c800000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880272400000 s93016 r8192 d29864 u262144 [ 0.000000] pcpu-alloc: s93016 r8192 d29864 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2029082 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=9b688b36-f8c5-411b-abf3-f5cf5f78ca7e ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8028492K/8245252K available (5671K kernel code, 1049K rwdata, 2792K rodata, 1296K init, 836K bss, 216760K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:2048 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: using HPET reference calibration [ 0.000000] tsc: Detected 2400.048 MHz processor [ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.09 BogoMIPS (lpj=9600192) [ 0.000032] pid_max: default: 32768 minimum: 301 [ 0.000038] ACPI: Core revision 20150818 [ 0.027302] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.027326] Security Framework initialized [ 0.027327] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.027333] AppArmor: AppArmor disabled by boot time parameter [ 0.027831] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029406] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.030071] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.030080] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.030274] Initializing cgroup subsys io [ 0.030278] Initializing cgroup subsys memory [ 0.030283] Initializing cgroup subsys devices [ 0.030285] Initializing cgroup subsys freezer [ 0.030287] Initializing cgroup subsys net_cls [ 0.030289] Initializing cgroup subsys perf_event [ 0.030291] Initializing cgroup subsys net_prio [ 0.030317] CPU: Physical Processor ID: 0 [ 0.030318] CPU: Processor Core ID: 0 [ 0.031578] mce: CPU supports 8 MCE banks [ 0.031595] CPU0: Thermal monitoring enabled (TM1) [ 0.031604] process: using mwait in idle threads [ 0.031606] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.031607] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.031938] Freeing SMP alternatives memory: 20K (ffffffff81c4c000 - ffffffff81c51000) [ 0.034940] ftrace: allocating 23601 entries in 93 pages [ 0.044046] DMAR: Host address width 39 [ 0.044048] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.044054] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.044056] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.044060] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.044061] DMAR: RMRR base: 0x00000085e7a000 end: 0x00000085e99fff [ 0.044063] DMAR: RMRR base: 0x0000008a000000 end: 0x0000008c7fffff [ 0.044065] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.044066] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.044067] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.044068] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.045497] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.045498] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.049532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.089256] TSC deadline timer enabled [ 0.089261] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.089286] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver. [ 0.089316] ... version: 4 [ 0.089317] ... bit width: 48 [ 0.089318] ... generic registers: 4 [ 0.089318] ... value mask: 0000ffffffffffff [ 0.089319] ... max period: 0000ffffffffffff [ 0.089320] ... fixed-purpose events: 3 [ 0.089321] ... event mask: 000000070000000f [ 0.089864] x86: Booting SMP configuration: [ 0.089866] .... node #0, CPUs: #1 [ 0.104344] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.104412] #2 #3 [ 0.133310] x86: Booted up 1 node, 4 CPUs [ 0.133313] smpboot: Total of 4 processors activated (19200.38 BogoMIPS) [ 0.137183] devtmpfs: initialized [ 0.139320] PM: Registering ACPI NVS region [mem 0x73c9e000-0x73c9efff] (4096 bytes) [ 0.139322] PM: Registering ACPI NVS region [mem 0x85f7e000-0x87f7dfff] (33554432 bytes) [ 0.139971] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.140055] pinctrl core: initialized pinctrl subsystem [ 0.140188] NET: Registered protocol family 16 [ 0.149016] cpuidle: using governor ladder [ 0.165041] cpuidle: using governor menu [ 0.165088] Simple Boot Flag at 0x44 set to 0x1 [ 0.165136] ACPI: bus type PCI registered [ 0.165138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.165224] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.165227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.165230] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.165482] PCI: Using configuration type 1 for base access [ 0.177388] ACPI: Added _OSI(Module Device) [ 0.177390] ACPI: Added _OSI(Processor Device) [ 0.177391] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.177392] ACPI: Added _OSI(Processor Aggregator Device) [ 0.183571] ACPI: Executed 17 blocks of module-level executable AML code [ 0.188000] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.191786] ACPI: Dynamic OEM Table Load: [ 0.191797] ACPI: SSDT 0xFFFF880268743C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121220) [ 0.192577] ACPI: Dynamic OEM Table Load: [ 0.192587] ACPI: SSDT 0xFFFF88026989D800 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20121220) [ 0.194445] ACPI: Dynamic OEM Table Load: [ 0.194455] ACPI: SSDT 0xFFFF88026989D000 0005AA (v02 PmRef ApIst 00003000 INTL 20121220) [ 0.195457] ACPI: Dynamic OEM Table Load: [ 0.195465] ACPI: SSDT 0xFFFF8802698DEE00 000119 (v02 PmRef ApCst 00003000 INTL 20121220) [ 0.197975] ACPI : EC: EC started [ 0.200984] ACPI: Interpreter enabled [ 0.200994] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580) [ 0.201003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580) [ 0.201030] ACPI: (supports S0 S3 S4 S5) [ 0.201031] ACPI: Using IOAPIC for interrupt routing [ 0.201067] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.217804] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.217809] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.220216] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.221800] PCI host bridge to bus 0000:00 [ 0.221803] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.221805] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.221807] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.221808] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.221810] pci_bus 0000:00: root bus resource [mem 0x8c800000-0xdfffffff window] [ 0.221811] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.221819] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.222422] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.222436] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] [ 0.222443] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.222447] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.223108] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.223139] pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit] [ 0.223196] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.223779] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.223820] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.223849] pci 0000:00:14.2: reg 0x10: [mem 0xa132a000-0xa132afff 64bit] [ 0.224490] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.224527] pci 0000:00:16.0: reg 0x10: [mem 0xa132b000-0xa132bfff 64bit] [ 0.224586] pci 0000:00:16.0: PME# supported from D3hot [ 0.225206] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.225232] pci 0000:00:17.0: reg 0x10: [mem 0xa1328000-0xa1329fff] [ 0.225241] pci 0000:00:17.0: reg 0x14: [mem 0xa132e000-0xa132e0ff] [ 0.225249] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.225258] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.225266] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.225274] pci 0000:00:17.0: reg 0x24: [mem 0xa132c000-0xa132c7ff] [ 0.225305] pci 0000:00:17.0: PME# supported from D3hot [ 0.225929] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.225989] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.226585] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.226634] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.226695] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.227292] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.227342] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.228044] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.228059] pci 0000:00:1f.2: reg 0x10: [mem 0xa1324000-0xa1327fff] [ 0.228713] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.228752] pci 0000:00:1f.3: reg 0x10: [mem 0xa1320000-0xa1323fff 64bit] [ 0.228787] pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit] [ 0.228820] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.231805] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.231847] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.231901] pci 0000:00:1f.4: reg 0x10: [mem 0xa132d000-0xa132d0ff 64bit] [ 0.231971] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f] [ 0.232691] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.232731] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.232760] pci 0000:01:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit] [ 0.232778] pci 0000:01:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit] [ 0.232843] pci 0000:01:00.0: supports D1 D2 [ 0.232844] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.232887] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.241369] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.241372] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.241375] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff] [ 0.241678] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000 [ 0.242128] pci 0000:02:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit] [ 0.243251] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.243598] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.253530] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.253534] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff] [ 0.254836] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.254889] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.254938] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.254987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255084] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255132] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255180] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255462] platform MSFT0101:00: failed to claim resource 1 [ 0.255524] acpi MSFT0101:00: platform device creation failed: -16 [ 0.256626] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.256718] ACPI : EC: GPE = 0x4f, I/O: command/status = 0x66, data = 0x62 [ 0.256817] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.256819] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.256821] vgaarb: loaded [ 0.256822] vgaarb: bridge control possible 0000:00:02.0 [ 0.256933] PCI: Using ACPI for IRQ routing [ 0.285037] PCI: pci_cache_line_size set to 64 bytes [ 0.285356] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.285357] e820: reserve RAM buffer [mem 0x73c9e000-0x73ffffff] [ 0.285358] e820: reserve RAM buffer [mem 0x73d79000-0x73ffffff] [ 0.285359] e820: reserve RAM buffer [mem 0x8558e000-0x87ffffff] [ 0.285361] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff] [ 0.285362] e820: reserve RAM buffer [mem 0x272800000-0x273ffffff] [ 0.285531] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.285536] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.287581] clocksource: Switched to clocksource hpet [ 0.292426] pnp: PnP ACPI init [ 0.292522] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.292524] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.292526] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.292527] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.292529] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.292530] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.292532] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.292535] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293098] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.293100] system 00:01: [io 0xffff] has been reserved [ 0.293101] system 00:01: [io 0xffff] has been reserved [ 0.293103] system 00:01: [io 0xffff] has been reserved [ 0.293105] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.293106] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.293108] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293198] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.293234] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.293236] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.293261] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.293284] pnp 00:05: Plug and Play ACPI device, IDs ETD0642 ETD0000 PNP0f13 (active) [ 0.294291] system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.294293] system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.294294] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.294296] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.294297] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.294299] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294748] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.294750] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.294751] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.294753] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.294755] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.294756] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.294758] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.294760] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.294761] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.294763] system 00:07: [mem 0x8c800000-0x8c81ffff] has been reserved [ 0.294765] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.295979] pnp: PnP ACPI: found 8 devices [ 0.304397] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.304417] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.304420] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.304424] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff] [ 0.304430] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.304434] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff] [ 0.304441] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.304443] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.304444] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.304446] pci_bus 0000:00: resource 7 [mem 0x8c800000-0xdfffffff window] [ 0.304447] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.304448] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.304450] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff] [ 0.304451] pci_bus 0000:02: resource 1 [mem 0xa1000000-0xa11fffff] [ 0.304605] NET: Registered protocol family 2 [ 0.304787] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.304918] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.305021] TCP: Hash tables configured (established 65536 bind 65536) [ 0.305042] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.305067] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.305179] NET: Registered protocol family 1 [ 0.305193] pci 0000:00:02.0: Video device with shadowed ROM [ 0.306756] PCI: CLS 64 bytes, default 64 [ 0.306795] Unpacking initramfs... [ 0.388910] Freeing initrd memory: 4764K (ffff8800376a2000 - ffff880037b49000) [ 0.388931] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.388934] software IO TLB [mem 0x8158e000-0x8558e000] (64MB) mapped at [ffff88008158e000-ffff88008558dfff] [ 0.389067] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x33 [ 0.389079] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x33 [ 0.389083] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x33 [ 0.389092] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x33 [ 0.389134] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.389462] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.389506] audit: initializing netlink subsys (disabled) [ 0.389519] audit: type=2000 audit(1452160340.400:1): initialized [ 0.389893] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.389910] zbud: loaded [ 0.390097] VFS: Disk quotas dquot_6.6.0 [ 0.390133] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.390978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.391047] io scheduler noop registered [ 0.391049] io scheduler deadline registered [ 0.391082] io scheduler cfq registered (default) [ 0.391776] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.391778] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.391781] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.391798] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 0.391799] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.391802] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 0.391808] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.391814] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.391834] intel_idle: MWAIT substates: 0x11142120 [ 0.391835] intel_idle: v0.4 model 0x4E [ 0.391836] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.392090] GHES: HEST is not enabled! [ 0.392179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.392725] Linux agpgart interface v0.103 [ 0.392769] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 0.392770] AMD IOMMUv2 functionality not available on this system [ 0.393204] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.409304] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.409308] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.409479] mousedev: PS/2 mouse device common for all mice [ 0.409541] rtc_cmos 00:02: RTC can wake from S4 [ 0.410353] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.410434] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.410445] Intel P-state driver initializing. [ 0.410458] intel_pstate: HWP enabled [ 0.410592] intel_pstate: HWP enabled [ 0.410726] intel_pstate: HWP enabled [ 0.410840] intel_pstate: HWP enabled [ 0.410932] ledtrig-cpu: registered to indicate activity on CPUs [ 0.411495] NET: Registered protocol family 10 [ 0.411794] mip6: Mobile IPv6 [ 0.411798] NET: Registered protocol family 17 [ 0.411804] mpls_gso: MPLS GSO support [ 0.412199] registered taskstats version 1 [ 0.412224] zswap: loaded using pool lzo/zbud [ 0.415231] rtc_cmos 00:02: setting system clock to 2016-01-07 09:52:20 UTC (1452160340) [ 0.415300] PM: Hibernation image not present or could not be loaded. [ 0.415673] Freeing unused kernel memory: 1296K (ffffffff81b08000 - ffffffff81c4c000) [ 0.415674] Write protecting the kernel read-only data: 10240k [ 0.416095] Freeing unused kernel memory: 460K (ffff88000158d000 - ffff880001600000) [ 0.416393] Freeing unused kernel memory: 1304K (ffff8800018ba000 - ffff880001a00000) [ 0.419092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.425229] random: systemd-udevd urandom read with 3 bits of entropy available [ 0.457268] SCSI subsystem initialized [ 0.458424] libata version 3.00 loaded. [ 0.459245] ahci 0000:00:17.0: version 3.0 [ 0.471832] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.471837] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.472315] scsi host0: ahci [ 0.472482] scsi host1: ahci [ 0.472532] ata1: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c100 irq 124 [ 0.472546] ata2: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c180 irq 124 [ 0.800225] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.804249] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.804292] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, G801, max UDMA/100 [ 0.805764] ata1.00: ATA-8: HGST HTS545050A7E660, GR2ZB230, max UDMA/133 [ 0.805772] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.807438] ata1.00: configured for UDMA/133 [ 0.808157] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 B230 PQ: 0 ANSI: 5 [ 0.811542] ata2.00: configured for UDMA/100 [ 0.820668] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC G801 PQ: 0 ANSI: 5 [ 0.834118] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.834125] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.834309] sd 0:0:0:0: [sda] Write Protect is off [ 0.834318] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.834370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.141767] sda: sda1 sda2 < sda5 > sda3 [ 1.143546] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.388679] tsc: Refined TSC clocksource calibration: 2399.999 MHz [ 1.388689] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns [ 1.684334] PM: Starting manual resume from disk [ 1.684344] PM: Hibernation image partition 8:5 present [ 1.684347] PM: Looking for hibernation image. [ 1.684561] PM: Image not found (code -22) [ 1.684564] PM: Hibernation image not present or could not be loaded. [ 1.827919] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.389765] clocksource: Switched to clocksource tsc [ 2.667879] random: nonblocking pool is initialized [ 2.700505] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 2.842616] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 2.842977] systemd[1]: Detected architecture x86-64. [ 2.854145] systemd[1]: Set hostname to <cyberwarrior>. [ 4.754887] systemd[1]: NetworkManager-wait-online.service: Cannot add dependency job, ignoring: Unit NetworkManager-wait-online.service failed to load: No such file or directory. [ 4.756746] systemd[1]: Listening on Syslog Socket. [ 4.756972] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.757102] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.757415] systemd[1]: Created slice User and Session Slice. [ 4.757503] systemd[1]: Listening on udev Kernel Socket. [ 4.757537] systemd[1]: Reached target User and Group Name Lookups. [ 4.757566] systemd[1]: Reached target Encrypted Volumes. [ 4.757635] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.757717] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.757952] systemd[1]: Listening on Journal Audit Socket. [ 4.758208] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.758262] systemd[1]: Created slice System Slice. [ 4.758273] systemd[1]: Reached target Slices. [ 4.758323] systemd[1]: Created slice system-getty.slice. [ 4.758370] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.758395] systemd[1]: Listening on udev Control Socket. [ 4.758402] systemd[1]: Reached target Remote File Systems (Pre). [ 4.758407] systemd[1]: Reached target Remote File Systems. [ 4.758432] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.758453] systemd[1]: Listening on Journal Socket. [ 4.758752] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.806664] systemd[1]: Starting Load Kernel Modules... [ 4.808211] systemd[1]: Mounting POSIX Message Queue File System... [ 4.809877] systemd[1]: Starting Nameserver information manager... [ 4.811416] systemd[1]: Mounting Huge Pages File System... [ 4.812999] systemd[1]: Starting LSB: Prepare console... [ 4.814548] systemd[1]: Starting Journal Service... [ 4.815411] systemd[1]: Mounting Debug File System... [ 5.031624] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.033697] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.353762] systemd[1]: Started Journal Service. [ 5.468699] lp: driver loaded but no devices found [ 5.496598] ppdev: user-space parallel port driver [ 5.931785] ACPI: bus type USB registered [ 5.931923] usbcore: registered new interface driver usbfs [ 5.932012] usbcore: registered new interface driver hub [ 5.932109] usbcore: registered new device driver usb [ 6.259878] usbcore: registered new interface driver ath9k_htc [ 7.631990] cfg80211: World regulatory domain updated: [ 7.632002] cfg80211: DFS Master region: unset [ 7.632007] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7.632017] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.632024] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.632029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7.632036] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7.632043] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7.632049] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7.632054] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7.632060] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8.970925] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 9.056192] systemd-journald[170]: Received request to flush runtime journal from PID 1 [ 9.235570] ACPI: AC Adapter [ADP0] (on-line) [ 9.235659] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 9.235708] ACPI: Lid Switch [LID0] [ 9.235742] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 9.235744] ACPI: Power Button [PWRB] [ 9.235773] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 9.235775] ACPI: Power Button [PWRF] [ 9.289454] tpm_crb MSFT0101:00: ioremap of the command buffer failed [ 9.289521] tpm_crb: probe of MSFT0101:00 failed with error -12 [ 9.373522] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 9.373533] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 9.374641] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 9.374649] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 9.375051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.375056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.375059] usb usb1: Product: xHCI Host Controller [ 9.375061] usb usb1: Manufacturer: Linux 4.3.0-1-amd64 xhci-hcd [ 9.375064] usb usb1: SerialNumber: 0000:00:14.0 [ 9.375296] hub 1-0:1.0: USB hub found [ 9.375321] hub 1-0:1.0: 12 ports detected [ 9.380736] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 9.380743] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 9.380789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 9.380792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.380794] usb usb2: Product: xHCI Host Controller [ 9.380797] usb usb2: Manufacturer: Linux 4.3.0-1-amd64 xhci-hcd [ 9.380799] usb usb2: SerialNumber: 0000:00:14.0 [ 9.381003] hub 2-0:1.0: USB hub found [ 9.381021] hub 2-0:1.0: 6 ports detected [ 9.382592] usb: failed to peer usb2-port3 and usb1-port4 by location (usb2-port3:none) (usb1-port4:usb2-port2) [ 9.382597] usb usb2-port3: failed to peer to usb1-port4 (-16) [ 9.382599] usb: port power management may be unreliable [ 9.383072] usb: failed to peer usb2-port4 and usb1-port4 by location (usb2-port4:none) (usb1-port4:usb2-port2) [ 9.383077] usb usb2-port4: failed to peer to usb1-port4 (-16) [ 9.383559] usb: failed to peer usb2-port5 and usb1-port4 by location (usb2-port5:none) (usb1-port4:usb2-port2) [ 9.383563] usb usb2-port5: failed to peer to usb1-port4 (-16) [ 9.383974] usb: failed to peer usb2-port6 and usb1-port4 by location (usb2-port6:none) (usb1-port4:usb2-port2) [ 9.383977] usb usb2-port6: failed to peer to usb1-port4 (-16) [ 9.415841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.461630] wmi: Mapper loaded [ 9.500900] ACPI: Battery Slot [BAT0] (battery present) [ 9.516236] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405F conflicts with OpRegion 0x0000000000004040-0x000000000000404F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254) [ 9.516258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.527767] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 9.622209] hidraw: raw HID events driver (C) Jiri Kosina [ 9.682030] Bluetooth: Core ver 2.20 [ 9.682071] NET: Registered protocol family 31 [ 9.682076] Bluetooth: HCI device and connection manager initialized [ 9.682087] Bluetooth: HCI socket layer initialized [ 9.682095] Bluetooth: L2CAP socket layer initialized [ 9.682119] Bluetooth: SCO socket layer initialized [ 9.746979] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 9.755854] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.755882] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.774768] Bluetooth: HCI UART driver ver 2.3 [ 9.774771] Bluetooth: HCI UART protocol H4 registered [ 9.774773] Bluetooth: HCI UART protocol BCSP registered [ 9.774774] Bluetooth: HCI UART protocol LL registered [ 9.774775] Bluetooth: HCI UART protocol ATH3K registered [ 9.774776] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 9.774797] Bluetooth: HCI UART protocol Intel registered [ 9.774808] Bluetooth: HCI UART protocol BCM registered [ 9.827547] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.837108] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6 [ 9.837641] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc90000c8e000, 50:7b:9d:31:31:13, XID 14100800 IRQ 127 [ 9.837652] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 9.855150] [drm] Initialized drm 1.1.0 20060810 [ 9.866641] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.866645] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.866851] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.994171] usb 1-4: New USB device found, idVendor=04f2, idProduct=b50e [ 9.994182] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 9.994189] usb 1-4: Product: Lenovo EasyCamera [ 9.994195] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd. [ 9.994200] usb 1-4: SerialNumber: 0001 [ 10.158299] [drm] Memory usable by graphics device = 4096M [ 10.158312] [drm] Replacing VGA console driver [ 10.160036] Console: switching to colour dummy device 80x25 [ 10.163332] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 10.169419] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.169427] [drm] Driver supports precise vblank timestamp query. [ 10.169876] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.207160] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1.bin [ 10.222958] fbcon: inteldrmfb (fb0) is primary device [ 10.230259] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.230930] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 10.242098] AVX2 version of gcm_enc/dec engaged. [ 10.242101] AES CTR mode by8 optimization enabled [ 10.323460] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03) [ 10.340997] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a. [ 10.351934] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129 [ 10.351939] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.351943] usb 1-5: Product: USB2.0-CRW [ 10.351947] usb 1-5: Manufacturer: Generic [ 10.351950] usb 1-5: SerialNumber: 20100201396000000 [ 10.356821] psmouse serio1: elantech: Elan sample query result 05, 20, 97 [ 10.450605] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 10.451966] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.467879] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.467883] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 10.483839] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.493753] sha256_ssse3: Using AVX2 optimized SHA-256 implementation [ 10.499843] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.515850] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.515869] [drm:intel_dp_aux_ch [i915]] *ERROR* dp_aux_ch not done status 0xad40001f [ 10.539844] ------------[ cut here ]------------ [ 10.539872] WARNING: CPU: 2 PID: 371 at /build/linux-dUKt9u/linux-4.3.3/drivers/gpu/drm/i915/intel_dp.c:854 intel_dp_aux_ch+0x112/0x670 [i915]() [ 10.539873] dp_aux_ch not started status 0xad40001f [ 10.539899] Modules linked in: sha256_ssse3 sha256_generic hmac drbg(+) ansi_cprng aesni_intel(+) i915(+) aes_x86_64 drm_kms_helper snd_hda_intel snd_hda_codec lrw snd_hda_core i2c_hid sr_mod gf128mul drm snd_hwdep r8169 mii snd_pcm hci_uart cdrom btbcm snd_timer sg snd soundcore ideapad_laptop evdev btintel psmouse bluetooth hid glue_helper ablk_helper cryptd mei_me serio_raw i2c_i801 i2c_algo_bit sparse_keymap wmi shpchp battery xhci_pci mei xhci_hcd tpm_crb tpm video acpi_pad button ac processor ath9k_htc ath9k_common ath9k_hw ath mac80211 cfg80211 rfkill usbcore usb_common parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod ahci libahci libata scsi_mod [ 10.539901] CPU: 2 PID: 371 Comm: kworker/2:3 Not tainted 4.3.0-1-amd64 #1 Debian 4.3.3-5 [ 10.539901] Hardware name: LENOVO 80Q7/Paris 5A8, BIOS D5CN28WW 08/13/2015 [ 10.539906] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.539907] 0000000000000000 00000000c1617afb ffffffff812ddce9 ffff880267533988 [ 10.539908] ffffffff81072b1d 00000000ad40001f ffff8802675339e0 00000000fffffff0 [ 10.539909] 0000000000064014 ffff8802679c0000 ffffffff81072bac ffffffffa076b210 [ 10.539910] Call Trace: [ 10.539914] [<ffffffff812ddce9>] ? dump_stack+0x40/0x57 [ 10.539916] [<ffffffff81072b1d>] ? warn_slowpath_common+0x7d/0xb0 [ 10.539917] [<ffffffff81072bac>] ? warn_slowpath_fmt+0x5c/0x80 [ 10.539937] [<ffffffffa07291a2>] ? intel_dp_aux_ch+0x112/0x670 [i915] [ 10.539939] [<ffffffff810b1590>] ? wake_atomic_t_function+0x60/0x60 [ 10.539957] [<ffffffffa07297d0>] ? intel_dp_aux_transfer+0xd0/0x1e0 [i915] [ 10.539959] [<ffffffff810d7c45>] ? hrtimer_try_to_cancel+0x25/0x100 [ 10.539962] [<ffffffffa0676c78>] ? drm_dp_dpcd_access+0x68/0x110 [drm_kms_helper] [ 10.539966] [<ffffffffa0676e27>] ? drm_dp_dpcd_write+0x17/0x20 [drm_kms_helper] [ 10.539986] [<ffffffffa072ba3b>] ? intel_dp_sink_dpms+0x9b/0xe0 [i915] [ 10.540004] [<ffffffffa0720ae3>] ? intel_ddi_post_disable+0x173/0x1e0 [i915] [ 10.540022] [<ffffffffa06fb25b>] ? haswell_crtc_disable+0x12b/0x2c0 [i915] [ 10.540040] [<ffffffffa0703903>] ? intel_atomic_commit+0x123/0x12f0 [i915] [ 10.540052] [<ffffffffa05df384>] ? drm_atomic_check_only+0x214/0x540 [drm] [ 10.540056] [<ffffffffa067e69f>] ? drm_atomic_helper_set_config+0x1af/0x410 [drm_kms_helper] [ 10.540064] [<ffffffffa05cf73e>] ? drm_mode_set_config_internal+0x5e/0xf0 [drm] [ 10.540068] [<ffffffffa06813ca>] ? restore_fbdev_mode+0xaa/0x110 [drm_kms_helper] [ 10.540072] [<ffffffffa0683170>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x60 [drm_kms_helper] [ 10.540075] [<ffffffffa06831d9>] ? drm_fb_helper_set_par+0x29/0x50 [drm_kms_helper] [ 10.540078] [<ffffffffa0683109>] ? drm_fb_helper_hotplug_event+0xb9/0x100 [drm_kms_helper] [ 10.540081] [<ffffffffa067778b>] ? output_poll_execute+0x18b/0x1d0 [drm_kms_helper] [ 10.540083] [<ffffffff8108a40f>] ? process_one_work+0x19f/0x3d0 [ 10.540084] [<ffffffff8108a68d>] ? worker_thread+0x4d/0x450 [ 10.540085] [<ffffffff8108a640>] ? process_one_work+0x3d0/0x3d0 [ 10.540086] [<ffffffff810904bd>] ? kthread+0xcd/0xf0 [ 10.540088] [<ffffffff810903f0>] ? kthread_create_on_node+0x190/0x190 [ 10.540090] [<ffffffff8158514f>] ? ret_from_fork+0x3f/0x70 [ 10.540092] [<ffffffff810903f0>] ? kthread_create_on_node+0x190/0x190 [ 10.540093] ---[ end trace 880d97cedbcc59af ]--- [ 10.653134] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e360 [ 10.653135] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.986136] usbcore: registered new interface driver btusb [ 10.987869] bluetooth hci0: firmware: failed to load qca/rampatch_usb_00000300.bin (-2) [ 10.987871] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000300.bin failed with error -2 [ 10.987872] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000300.bin (-2) [ 11.036592] media: Linux media interface: v0.10 [ 11.257062] Linux video capture interface: v2.00 [ 11.283123] bluetooth hci0: firmware: failed to load qca/rampatch_usb_00000300.bin (-2) [ 11.283126] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000300.bin failed with error -2 [ 11.283131] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000300.bin (-2) [ 11.435762] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b50e) [ 11.440117] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input8 [ 11.440249] usbcore: registered new interface driver uvcvideo [ 11.440250] USB Video Class driver (1.1.1) [ 11.662745] Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k FS [ 11.749560] intel_rapl: Found RAPL domain package [ 11.749562] intel_rapl: Found RAPL domain core [ 11.749564] intel_rapl: Found RAPL domain uncore [ 11.749566] intel_rapl: Found RAPL domain dram [ 11.797244] [drm] RC6 on [ 12.166382] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 12.457546] usbcore: registered new interface driver rtsx_usb [ 16.752718] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training [ 17.521312] [drm:intel_dp_complete_link_train [i915]] *ERROR* failed to start channel equalization [ 18.323697] Console: switching to colour frame buffer device 170x48 [ 18.339048] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 18.339051] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0 [ 18.341743] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 18.463045] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing. [ 18.463425] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 18.463430] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.463433] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 18.463436] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 18.463439] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 18.463442] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 18.463445] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 18.464262] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 18.484765] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 18.486038] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 18.486221] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 18.486388] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 18.486555] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 18.486726] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 19.432440] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw [ 19.449540] r8169 0000:01:00.0 eth0: link down [ 19.449628] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.107532] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.107541] Bluetooth: BNEP filters: protocol multicast [ 23.107551] Bluetooth: BNEP socket layer initialized [ 39.983049] ip_tables: (C) 2000-2006 Netfilter Core Team [ 235.319208] usb 1-3: new high-speed USB device number 5 using xhci_hcd [ 235.505293] usb 1-3: New USB device found, idVendor=0bc2, idProduct=5031 [ 235.505306] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 235.505313] usb 1-3: Product: FreeAgent GoFlex [ 235.505318] usb 1-3: Manufacturer: Seagate [ 235.505323] usb 1-3: SerialNumber: NA0FJWN6 [ 235.540973] usb-storage 1-3:1.0: USB Mass Storage device detected [ 235.541211] scsi host2: usb-storage 1-3:1.0 [ 235.541480] usbcore: registered new interface driver usb-storage [ 235.555820] usbcore: registered new interface driver uas [ 236.552367] scsi 2:0:0:0: Direct-Access Seagate FreeAgent GoFlex 214 PQ: 0 ANSI: 0 [ 236.554091] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 236.554191] sd 2:0:0:0: [sdb] 976773167 512-byte logical blocks: (500 GB/465 GiB) [ 236.554543] sd 2:0:0:0: [sdb] Write Protect is off [ 236.554559] sd 2:0:0:0: [sdb] Mode Sense: 0f 00 00 00 [ 236.554893] sd 2:0:0:0: [sdb] No Caching mode page found [ 236.554906] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 236.596765] sdb: sdb1 [ 236.598555] sd 2:0:0:0: [sdb] Attached SCSI disk [ 237.154309] fuse init (API version 7.23) _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Re: Qualcomm Atheros Device 0042 (rev 30) 2016-01-07 10:20 ` vagner @ 2016-01-07 11:20 ` Michal Kazior 2016-01-07 12:15 ` vagner 0 siblings, 1 reply; 10+ messages in thread From: Michal Kazior @ 2016-01-07 11:20 UTC (permalink / raw) To: vagner; +Cc: ath10k On 7 January 2016 at 11:20, vagner <vagnerrener@gmail.com> wrote: > > I have tried this before and did not work :( > > My dmesg is here: [...] Hi, ; git show v4.4-rc1:drivers/net/wireless/ath/ath10k/core.c | grep QCA9377 | wc -l 9 ; git show v4.3:drivers/net/wireless/ath/ath10k/core.c | grep QCA9377 | wc -l 0 Kernel 4.3 doesn't have support for QCA9377. It was merged into 4.4-rc1. You'll need to wait for 4.4 release or build an 4.4-rcX yourself (or use backports based on 4.4-rcX[1]) Michał [1]: https://wireless.wiki.kernel.org/en/users/drivers/ath10k/backports#compiling_custom_ath10k_backports _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Qualcomm Atheros Device 0042 (rev 30) 2016-01-07 11:20 ` Michal Kazior @ 2016-01-07 12:15 ` vagner 2016-01-07 12:41 ` Michal Kazior 0 siblings, 1 reply; 10+ messages in thread From: vagner @ 2016-01-07 12:15 UTC (permalink / raw) To: Michal Kazior; +Cc: ath10k Hi, Last week I compiled a 4.4-rcX kernel and the dmesg showed me that it was trying to load ath10k, but it failed. So, I gave up and installed 4.3 again. Perhaps I did something wrong, but I hope that the next 4.4 kernel will bring support for my wireless card. On the other hand I am waiting for a reply from Pratik Singhal who said he was successful in making his wireless card - also in a lenovo ideapad - to work using a Windows drive... By the way, do you know when 4.4-kernel is due? I am using a Usb wireless and it is very annoying because it heats up in few minutes and I have to unplug, wait for it to cool down and plug again to get internet access :( Thx On 01/07/2016 01:20 PM, Michal Kazior wrote: > On 7 January 2016 at 11:20, vagner <vagnerrener@gmail.com> wrote: >> I have tried this before and did not work :( >> >> My dmesg is here: > [...] > > Hi, > > ; git show v4.4-rc1:drivers/net/wireless/ath/ath10k/core.c | grep > QCA9377 | wc -l > 9 > ; git show v4.3:drivers/net/wireless/ath/ath10k/core.c | grep QCA9377 | wc -l > 0 > > Kernel 4.3 doesn't have support for QCA9377. It was merged into > 4.4-rc1. You'll need to wait for 4.4 release or build an 4.4-rcX > yourself (or use backports based on 4.4-rcX[1]) > > > Michał > > > [1]: https://wireless.wiki.kernel.org/en/users/drivers/ath10k/backports#compiling_custom_ath10k_backports _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Qualcomm Atheros Device 0042 (rev 30) 2016-01-07 12:15 ` vagner @ 2016-01-07 12:41 ` Michal Kazior 2016-01-07 16:20 ` vagner 0 siblings, 1 reply; 10+ messages in thread From: Michal Kazior @ 2016-01-07 12:41 UTC (permalink / raw) To: vagner; +Cc: ath10k On 7 January 2016 at 13:15, vagner <vagnerrener@gmail.com> wrote: > Hi, > > Last week I compiled a 4.4-rcX kernel and the dmesg showed me that it was > trying to load ath10k, but it failed. So, I gave up and installed 4.3 again. > Perhaps I did something wrong, but I hope that the next 4.4 kernel will > bring support for my wireless card. Just post dmesg from 4.4 once you try again. You could've been missing firmware files in paths ath10k expected them to be. > On the other hand I am waiting for a reply from Pratik Singhal who said he > was successful in making his wireless card - also in a lenovo ideapad - to > work using a Windows drive... You/he probably mean using some firmware-related stuff from windows driver package - most likely the eeprom/board file which can be an annoying requirement. > By the way, do you know when 4.4-kernel is due? According to the crystal ball it's due somewhere next week (http://phb-crystal-ball.org/). It's already at -rc8 so I think it's a matter of days. Since you use debian you could use the `experimental` package repo and get distro precompiled 4.4-rc8 right now. Michał _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Qualcomm Atheros Device 0042 (rev 30) 2016-01-07 12:41 ` Michal Kazior @ 2016-01-07 16:20 ` vagner 0 siblings, 0 replies; 10+ messages in thread From: vagner @ 2016-01-07 16:20 UTC (permalink / raw) To: Michal Kazior; +Cc: ath10k On 01/07/2016 02:41 PM, Michal Kazior wrote: > On 7 January 2016 at 13:15, vagner<vagnerrener@gmail.com> wrote: >> Hi, >> >> Last week I compiled a 4.4-rcX kernel and the dmesg showed me that it was >> trying to load ath10k, but it failed. So, I gave up and installed 4.3 again. >> Perhaps I did something wrong, but I hope that the next 4.4 kernel will >> bring support for my wireless card. > Just post dmesg from 4.4 once you try again. You could've been missing > firmware files in paths ath10k expected them to be. Thx a lot. But, I prefer to wait for the next kernel to see what happens. Compiling a kernel takes a long time and I do not have much experience on doing that... Ant if I go to experimental I am afraid of mixing up my debian and breaking it. I'd like to know how to use the windows drive, at least until the new kernel support my card. But, I know that this is not a fixing-linux way... > >> On the other hand I am waiting for a reply from Pratik Singhal who said he >> was successful in making his wireless card - also in a lenovo ideapad - to >> work using a Windows drive... > You/he probably mean using some firmware-related stuff from windows > driver package - most likely the eeprom/board file which can be an > annoying requirement. > > >> By the way, do you know when 4.4-kernel is due? > According to the crystal ball it's due somewhere next week > (http://phb-crystal-ball.org/). It's already at -rc8 so I think it's a > matter of days. > > Since you use debian you could use the `experimental` package repo and > get distro precompiled 4.4-rc8 right now. > > > Michał _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <CAGf2gkO_je4Q=0_RsYTQZtRorZU3U5fhoj+6+9gH5mFvNy1vFg@mail.gmail.com>]
* Re: Qualcomm Atheros Device 0042 (rev 30) [not found] ` <CAGf2gkO_je4Q=0_RsYTQZtRorZU3U5fhoj+6+9gH5mFvNy1vFg@mail.gmail.com> @ 2016-01-07 10:33 ` vagner 2016-01-07 10:39 ` vagner 2016-01-07 10:51 ` vagner 2 siblings, 0 replies; 10+ messages in thread From: vagner @ 2016-01-07 10:33 UTC (permalink / raw) To: Pratik Singhal, Hsu, Ryan; +Cc: ath10k How did you do that? I have the Windows drives, I think, in a cd-rom. There is a folder called 10.WLAN. What should I look for inside it and how do I know which is the firmware file for my card? There are other folders for other cards there as well. Here is the tree: 10.WLAN/ ├── BCM43162_7.35.295.2 │ ├── Driver │ │ └── Win10 │ │ ├── bcm43xx64.cat │ │ ├── bcm43xx.cat │ │ ├── bcmihvsrv64.dll │ │ ├── bcmihvsrv.dll │ │ ├── bcmihvui64.dll │ │ ├── bcmihvui.dll │ │ ├── bcmwdi.inf │ │ ├── bcmwl63a.sys │ │ └── bcmwl63.sys │ ├── Help.txt │ ├── readme.txt │ └── Setup │ ├── 0x0404.ini │ ├── 0x0406.ini │ ├── 0x0407.ini │ ├── 0x0408.ini │ ├── 0x0409.ini │ ├── 0x040a.ini │ ├── 0x040b.ini │ ├── 0x040c.ini │ ├── 0x040e.ini │ ├── 0x0410.ini │ ├── 0x0411.ini │ ├── 0x0412.ini │ ├── 0x0413.ini │ ├── 0x0414.ini │ ├── 0x0415.ini │ ├── 0x0416.ini │ ├── 0x0419.ini │ ├── 0x041d.ini │ ├── 0x041e.ini │ ├── 0x041f.ini │ ├── 0x0804.ini │ ├── 0x0816.ini │ ├── data1.cab │ ├── data1.hdr │ ├── data2.cab │ ├── ISLangUni.ini │ ├── ISSetup.dll │ ├── layout.bin │ ├── _Setup.dll │ ├── setup.exe │ ├── setup.ini │ ├── setup.inx │ └── setup.iss ├── DeDrvLdr.ini ├── Install.exe ├── Install.exe.lnk ├── Intel8260_18.12.2.2_AHWFW1062G_PV │ ├── Autorun.exe │ ├── Autorun.inf │ ├── intel_software_license.rtf │ ├── license-notices for wifi driver.doc │ ├── verfile.tic │ └── Win7Plus │ ├── Docs │ │ ├── ARA │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── CHS │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── CHT │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── CSY │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── DAN │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── DEU │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── ELL │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── ENU │ │ │ ├── adaptusr.htm │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ └── warranty.htm │ │ ├── ESN │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── FIN │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── FRA │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── HEB │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── HUN │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── Icons │ │ │ ├── 8260_Japan.jpg │ │ │ ├── AdHoc.jpg │ │ │ ├── all.jpg │ │ │ ├── arrows.jpg │ │ │ ├── caution.jpg │ │ │ ├── conicon3.jpg │ │ │ ├── conicon5.jpg │ │ │ ├── conicon.jpg │ │ │ ├── exclude.jpg │ │ │ ├── icon_1.JPG │ │ │ ├── icon2.jpg │ │ │ ├── icon_2.JPG │ │ │ ├── icon3.jpg │ │ │ ├── icon_3.JPG │ │ │ ├── icon4.jpg │ │ │ ├── icon_4.JPG │ │ │ ├── icon_5.JPG │ │ │ ├── import1.jpg │ │ │ ├── it.jpg │ │ │ ├── japan.jpg │ │ │ ├── Japan-SD.jpg │ │ │ ├── korea.jpg │ │ │ ├── NCC_ID.jpg │ │ │ ├── note.jpg │ │ │ ├── profile.jpg │ │ │ ├── RCM_jpg.jpg │ │ │ ├── sigicon.jpg │ │ │ ├── Singapore Reg ID.jpg │ │ │ ├── taiwan.jpg │ │ │ ├── titicon7.jpg │ │ │ ├── ttico2.jpg │ │ │ ├── ttico5.jpg │ │ │ ├── tticon1.jpg │ │ │ ├── tticon2.jpg │ │ │ ├── tticon3.jpg │ │ │ ├── tticon4.jpg │ │ │ ├── tticon5.jpg │ │ │ ├── tticon6.jpg │ │ │ ├── tticon8.jpg │ │ │ ├── warning.jpg │ │ │ └── WEEE_Icon1.JPG │ │ ├── ITA │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── JPN │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── KOR │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── NLD │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── NOR │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── PLK │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── PTB │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── PTG │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── releasenotes.htm │ │ ├── RUS │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── SVE │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ ├── THA │ │ │ ├── adaptusr.htm │ │ │ ├── caution.jpg │ │ │ ├── glossary.htm │ │ │ ├── index.htm │ │ │ ├── japan.jpg │ │ │ ├── korea.jpg │ │ │ ├── regs.htm │ │ │ ├── safety.htm │ │ │ ├── specs.htm │ │ │ ├── style.css │ │ │ ├── support.htm │ │ │ ├── taiwan.jpg │ │ │ ├── warning.jpg │ │ │ └── warranty.htm │ │ └── TRK │ │ ├── adaptusr.htm │ │ ├── caution.jpg │ │ ├── glossary.htm │ │ ├── index.htm │ │ ├── japan.jpg │ │ ├── korea.jpg │ │ ├── regs.htm │ │ ├── safety.htm │ │ ├── specs.htm │ │ ├── style.css │ │ ├── support.htm │ │ ├── taiwan.jpg │ │ ├── warning.jpg │ │ └── warranty.htm │ └── Win64 │ ├── Drivers │ │ └── WinT │ │ ├── DPInst64.exe │ │ ├── iprodifx.exe │ │ ├── netwew00.cat │ │ ├── Netwew00.INF │ │ ├── NETwew00.sys │ │ ├── netwew01.cat │ │ ├── Netwew01.INF │ │ ├── NETwew01.sys │ │ ├── Netwfw00.dat │ │ ├── Netwfw01.dat │ │ ├── Netwfw02.dat │ │ ├── Netwtw02.cat │ │ ├── Netwtw02.INF │ │ └── Netwtw02.sys │ └── Install │ ├── data │ │ ├── BTHS.msi │ │ ├── CAM.msi │ │ ├── Driver.msi │ │ ├── IntelHS.cab │ │ ├── PROSetEnterprise.msi │ │ └── WiFi.msi │ ├── Setup.exe │ └── setup.xml ├── NFA435_12.0.0.126_WHQL │ ├── DriverOnly │ │ ├── win32 │ │ │ ├── Data.msc │ │ │ ├── eeprom_qca9377_1p0_NFA425_olpc.bin │ │ │ ├── eeprom_qca9377_1p0_NFA435_olpc_A.bin │ │ │ ├── eeprom_qca9377_1p0_NFA435_olpc.bin │ │ │ ├── eeprom_qca9377_1p0_NFA455_olpc.bin │ │ │ ├── eeprom_qca9377_1p1_NFA425_olpc.bin │ │ │ ├── eeprom_qca9377_1p1_NFA435_olpc.bin │ │ │ ├── netathr10_tf.inf │ │ │ ├── qca9377_2_0.bin │ │ │ ├── Qcamain10x86.sys │ │ │ └── qcamainext10.cat │ │ └── x64 │ │ ├── Data.msc │ │ ├── eeprom_qca9377_1p0_NFA425_olpc.bin │ │ ├── eeprom_qca9377_1p0_NFA435_olpc_A.bin │ │ ├── eeprom_qca9377_1p0_NFA435_olpc.bin │ │ ├── eeprom_qca9377_1p0_NFA455_olpc.bin │ │ ├── eeprom_qca9377_1p1_NFA425_olpc.bin │ │ ├── eeprom_qca9377_1p1_NFA435_olpc.bin │ │ ├── netathr10x_tf.inf │ │ ├── qca9377_2_0.bin │ │ ├── Qcamain10x64.sys │ │ └── qcamainext10x.cat │ └── Install_CD │ ├── 0x0402.ini │ ├── 0x0404.ini │ ├── 0x0405.ini │ ├── 0x0406.ini │ ├── 0x0407.ini │ ├── 0x0408.ini │ ├── 0x0409.ini │ ├── 0x040a.ini │ ├── 0x040b.ini │ ├── 0x040c.ini │ ├── 0x040d.ini │ ├── 0x040e.ini │ ├── 0x0410.ini │ ├── 0x0411.ini │ ├── 0x0412.ini │ ├── 0x0413.ini │ ├── 0x0414.ini │ ├── 0x0415.ini │ ├── 0x0416.ini │ ├── 0x0418.ini │ ├── 0x0419.ini │ ├── 0x041a.ini │ ├── 0x041b.ini │ ├── 0x041d.ini │ ├── 0x041e.ini │ ├── 0x041f.ini │ ├── 0x0421.ini │ ├── 0x0424.ini │ ├── 0x0804.ini │ ├── 0x0816.ini │ ├── 0x0c1a.ini │ ├── data1.cab │ ├── data1.hdr │ ├── data2.cab │ ├── ISSetup.dll │ ├── layout.bin │ ├── readme.txt │ ├── setup.exe │ ├── setup.ini │ ├── setup.inx │ └── setup.iss └── RTL8821AE_2023.15.701.2015_WHQL ├── 0x0402.ini ├── 0x0403.ini ├── 0x0404.ini ├── 0x0405.ini ├── 0x0406.ini ├── 0x0407.ini ├── 0x0408.ini ├── 0x0409.ini ├── 0x040a.ini ├── 0x040b.ini ├── 0x040c.ini ├── 0x040e.ini ├── 0x0410.ini ├── 0x0411.ini ├── 0x0412.ini ├── 0x0413.ini ├── 0x0414.ini ├── 0x0415.ini ├── 0x0416.ini ├── 0x0418.ini ├── 0x0419.ini ├── 0x041a.ini ├── 0x041b.ini ├── 0x041d.ini ├── 0x041e.ini ├── 0x041f.ini ├── 0x0421.ini ├── 0x0424.ini ├── 0x042d.ini ├── 0x0804.ini ├── 0x0816.ini ├── 0x0c0c.ini ├── 0x0c1a.ini ├── DATA │ ├── 8188EE.ini │ ├── 8192CE.ini │ ├── 8192DE.ini │ ├── 8723AE.ini │ ├── 8723BE.ini │ ├── 8812AE.ini │ ├── 8821AE.ini │ ├── background2.jpg │ ├── background.jpg │ ├── RtlService.ini │ ├── RtWLan.ico │ ├── text.file │ ├── TrayIcon.bmp │ ├── Vista │ │ ├── 8188EE.ini │ │ ├── 8192CE.ini │ │ ├── 8192DE.ini │ │ ├── 8723AE.ini │ │ ├── 8723BE.ini │ │ ├── 8812AE.ini │ │ ├── 8821AE.ini │ │ └── RtlService.ini │ ├── Win10 │ │ ├── 8188EE.ini │ │ ├── 8192CE.ini │ │ ├── 8192DE.ini │ │ ├── 8723AE.ini │ │ ├── 8723BE.ini │ │ ├── 8812AE.ini │ │ ├── 8821AE.ini │ │ └── RtlService.ini │ ├── Win7 │ │ ├── 8188EE.ini │ │ ├── 8192CE.ini │ │ ├── 8192DE.ini │ │ ├── 8723AE.ini │ │ ├── 8723BE.ini │ │ ├── 8812AE.ini │ │ ├── 8821AE.ini │ │ └── RtlService.ini │ ├── Win8 │ │ ├── 8188EE.ini │ │ ├── 8192CE.ini │ │ ├── 8192DE.ini │ │ ├── 8723AE.ini │ │ ├── 8723BE.ini │ │ ├── 8812AE.ini │ │ ├── 8821AE.ini │ │ └── RtlService.ini │ ├── Win81 │ │ ├── 8188EE.ini │ │ ├── 8192CE.ini │ │ ├── 8192DE.ini │ │ ├── 8723AE.ini │ │ ├── 8723BE.ini │ │ ├── 8812AE.ini │ │ ├── 8821AE.ini │ │ └── RtlService.ini │ └── WPS ├── data1.cab ├── data1.hdr ├── data2.cab ├── EAP │ ├── x64 │ │ ├── EAP-FAST.msi │ │ ├── EAP-LEAP.msi │ │ └── EAP-PEAP.msi │ └── x86 │ ├── EAP-FAST.msi │ ├── EAP-LEAP.msi │ └── EAP-PEAP.msi ├── IM │ └── WINXP │ ├── 32 │ │ └── TWOPORT │ │ ├── xptwoport.cat │ │ ├── XPTWOPORT.INF │ │ ├── XPTWOPORT_MP.INF │ │ └── XPTWOPORT.sys │ └── 64 │ └── TWOPORT │ ├── xptwoport.cat │ ├── XPTWOPORT.INF │ ├── XPTWOPORT_MP.INF │ └── XPTWOPORT.sys ├── Install.bat ├── IsConfig.ini ├── ISLangUni.ini ├── ISSetup.dll ├── layout.bin ├── Release notes │ ├── ISS_Release.txt │ └── Utility_Release.txt ├── RTWLANE_Driver │ └── Win10X64 │ ├── netrtwlane.cat │ ├── netrtwlane.inf │ └── rtwlane.sys ├── Setup.exe ├── setup.ico ├── Setup.ini ├── setup.iss ├── UnInstall.bat └── Uninstall.iss 62 directories, 644 files On 01/07/2016 09:47 AM, Pratik Singhal wrote: > I also have a Lenovo Ideapad, with a different Qualcomm atheros > device. I was able to make it work using the ath10k driver found in > Linux 4.3 kernel and the firmware which was used by Windows 8.1 > I had previously tried working with the firmware available at the > kvalo repository, but unfortunately, that didn't work for me. I > suggest, that if the driver is complaining about missing firmware then > try copy pasting the windows firmware file into the appropriate directory. > > Regards, > Pratik Singhal > ᐧ > > On Thu, Jan 7, 2016 at 11:09 AM, Hsu, Ryan <ryanhsu@qca.qualcomm.com > <mailto:ryanhsu@qca.qualcomm.com>> wrote: > > Can you try this firmware? > > git clone https://github.com/kvalo/ath10k-firmware.git > sudo cp -r ./ath10k-firmware/QCA9377/ /lib/firmware/ath10k/ > sudo ln -s > /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin_WLAN.TF.1.0-00267-1 > /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin > > Otherwise a full dmesg log might be helpful to see what is the > failure. > > Ryan > > > -----Original Message----- > > From: ath10k [mailto:ath10k-bounces@lists.infradead.org > <mailto:ath10k-bounces@lists.infradead.org>] On Behalf Of > > vagner > > Sent: Wednesday, January 06, 2016 11:43 AM > > To: ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > > Subject: Qualcomm Atheros Device 0042 (rev 30) > > > > I Have a new laptop: > > > > Lenovo ideapad 300-15 > > Intel i5 6th generation > > > > Running Debian Stretch/Testing. And my wireless card does not > work. I have > > tried all sort of solutions. Including compiling with backports. > > But, my kernel is new, using the same backports new version. > > How can I make this nightmare card work in my machine? Please, help. > > > > uname -a > > > > 4.3.0-1-amd64 #1 SMP Debian 4.3.3-2 (2015-12-17) x86_64 GNU/Linux > > > > lspci > > > 02:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30) > > > > lshw -C network > > > > > *-network UNCLAIMED > > > description: Network controller > > > product: Qualcomm Atheros > > > vendor: Qualcomm Atheros > > > physical id: 0 > > > bus info: pci@0000:02:00.0 > > > version: 30 > > > width: 64 bits > > > clock: 33MHz > > > capabilities: pm msi pciexpress bus_master cap_list > > > configuration: latency=0 > > > resources: memory:a1000000-a11fffff > > > > Thx > > > > > > _______________________________________________ > > ath10k mailing list > > ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > > http://lists.infradead.org/mailman/listinfo/ath10k > > _______________________________________________ > ath10k mailing list > ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > http://lists.infradead.org/mailman/listinfo/ath10k > > > > > -- > Regards, > Pratik Singhal _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Qualcomm Atheros Device 0042 (rev 30) [not found] ` <CAGf2gkO_je4Q=0_RsYTQZtRorZU3U5fhoj+6+9gH5mFvNy1vFg@mail.gmail.com> 2016-01-07 10:33 ` vagner @ 2016-01-07 10:39 ` vagner 2016-01-07 10:51 ` vagner 2 siblings, 0 replies; 10+ messages in thread From: vagner @ 2016-01-07 10:39 UTC (permalink / raw) To: Pratik Singhal, Hsu, Ryan; +Cc: ath10k I used Kvalo drives before - more than once (and other github firmware, including compiling from linux-drives backports), but the solutions did not work for me. Here is my dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160101 (Debian 5.3.1-5) ) #1 SMP Debian 4.3.3-5 (2016-01-04) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=9b688b36-f8c5-411b-abf3-f5cf5f78ca7e ro quiet [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040 [ 0.000000] x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 0x440 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000073c9dfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000073c9e000-0x0000000073c9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000073c9f000-0x0000000073cc8fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000073cc9000-0x0000000073d78fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000073d79000-0x0000000074678fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000074679000-0x000000008558dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008558e000-0x0000000085f7dfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000085f7e000-0x0000000087f7dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000087f7e000-0x0000000087ffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x00000000880fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000089000000-0x000000008c7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002727fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO 80Q7/Paris 5A8, BIOS D5CN28WW 08/13/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x272800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0087FFF000 mask 7FFFFFF000 uncachable [ 0.000000] 2 base 0088000000 mask 7FF8000000 uncachable [ 0.000000] 3 base 0090000000 mask 7FF0000000 uncachable [ 0.000000] 4 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 5 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0x87fff000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01d24000, 0x01d24fff] PGTABLE [ 0.000000] BRK [0x01d25000, 0x01d25fff] PGTABLE [ 0.000000] BRK [0x01d26000, 0x01d26fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x272600000-0x2727fffff] [ 0.000000] [mem 0x272600000-0x2727fffff] page 2M [ 0.000000] BRK [0x01d27000, 0x01d27fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x260000000-0x2725fffff] [ 0.000000] [mem 0x260000000-0x2725fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x240000000-0x25fffffff] [ 0.000000] [mem 0x240000000-0x25fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x73c9dfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x73bfffff] page 2M [ 0.000000] [mem 0x73c00000-0x73c9dfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x73cc9000-0x73d78fff] [ 0.000000] [mem 0x73cc9000-0x73d78fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x74679000-0x8558dfff] [ 0.000000] [mem 0x74679000-0x747fffff] page 4k [ 0.000000] [mem 0x74800000-0x853fffff] page 2M [ 0.000000] [mem 0x85400000-0x8558dfff] page 4k [ 0.000000] BRK [0x01d28000, 0x01d28fff] PGTABLE [ 0.000000] BRK [0x01d29000, 0x01d29fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x87ffe000-0x87ffefff] [ 0.000000] [mem 0x87ffe000-0x87ffefff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x23fffffff] [ 0.000000] [mem 0x100000000-0x23fffffff] page 1G [ 0.000000] RAMDISK: [mem 0x376a2000-0x37b48fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x0000000087FCB188 0000EC (v01 LENOVO CB-01 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000087FEB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x0000000087FD0000 016943 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FACS 0x0000000087F4E000 000040 [ 0.000000] ACPI: SSDT 0x0000000087FC9000 000E58 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FCA000 000B39 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FCC000 002BAE (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FCF000 0002D4 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x0000000087FE7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x0000000087FE8000 0000BC (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: LPIT 0x0000000087FE9000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 0x0000000087FEA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DBGP 0x0000000087FEC000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x0000000087FED000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 0x0000000087FEE000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 0x0000000087FEF000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DBG2 0x0000000087FF0000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DBGP 0x0000000087FF1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FF2000 0030B3 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: POAT 0x0000000087FF6000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: TPM2 0x0000000087FF7000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FF8000 00004B (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x0000000087FF9000 0004B7 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x0000000087FFA000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x0000000087FFB000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: TCPA 0x0000000087FFC000 000032 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DMAR 0x0000000087FC8000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x0000000087FC7000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002727fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x2727f8000-0x2727fbfff] [ 0.000000] [ffffea0000000000-ffffea0009dfffff] PMD -> [ffff880269e00000-ffff880271dfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002727fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000073c9dfff] [ 0.000000] node 0: [mem 0x0000000073cc9000-0x0000000073d78fff] [ 0.000000] node 0: [mem 0x0000000074679000-0x000000008558dfff] [ 0.000000] node 0: [mem 0x0000000087ffe000-0x0000000087ffefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002727fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002727fffff] [ 0.000000] On node 0 totalpages: 2061313 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8434 pages used for memmap [ 0.000000] DMA32 zone: 539748 pages, LIFO batch:31 [ 0.000000] Normal zone: 23712 pages used for memmap [ 0.000000] Normal zone: 1517568 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x8a800000-0x8c7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x73c9e000-0x73c9efff] [ 0.000000] PM: Registered nosave memory: [mem 0x73c9f000-0x73cc8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x73d79000-0x74678fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8558e000-0x85f7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x85f7e000-0x87f7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x87f7e000-0x87ffdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x87fff000-0x880fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8c7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8c800000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa10000-0xffffffff] [ 0.000000] e820: [mem 0x8c800000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880272400000 s93016 r8192 d29864 u262144 [ 0.000000] pcpu-alloc: s93016 r8192 d29864 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2029082 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=9b688b36-f8c5-411b-abf3-f5cf5f78ca7e ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8028492K/8245252K available (5671K kernel code, 1049K rwdata, 2792K rodata, 1296K init, 836K bss, 216760K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:2048 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: using HPET reference calibration [ 0.000000] tsc: Detected 2400.048 MHz processor [ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.09 BogoMIPS (lpj=9600192) [ 0.000032] pid_max: default: 32768 minimum: 301 [ 0.000038] ACPI: Core revision 20150818 [ 0.027302] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.027326] Security Framework initialized [ 0.027327] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.027333] AppArmor: AppArmor disabled by boot time parameter [ 0.027831] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029406] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.030071] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.030080] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.030274] Initializing cgroup subsys io [ 0.030278] Initializing cgroup subsys memory [ 0.030283] Initializing cgroup subsys devices [ 0.030285] Initializing cgroup subsys freezer [ 0.030287] Initializing cgroup subsys net_cls [ 0.030289] Initializing cgroup subsys perf_event [ 0.030291] Initializing cgroup subsys net_prio [ 0.030317] CPU: Physical Processor ID: 0 [ 0.030318] CPU: Processor Core ID: 0 [ 0.031578] mce: CPU supports 8 MCE banks [ 0.031595] CPU0: Thermal monitoring enabled (TM1) [ 0.031604] process: using mwait in idle threads [ 0.031606] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.031607] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.031938] Freeing SMP alternatives memory: 20K (ffffffff81c4c000 - ffffffff81c51000) [ 0.034940] ftrace: allocating 23601 entries in 93 pages [ 0.044046] DMAR: Host address width 39 [ 0.044048] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.044054] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.044056] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.044060] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.044061] DMAR: RMRR base: 0x00000085e7a000 end: 0x00000085e99fff [ 0.044063] DMAR: RMRR base: 0x0000008a000000 end: 0x0000008c7fffff [ 0.044065] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.044066] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.044067] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.044068] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.045497] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.045498] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.049532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.089256] TSC deadline timer enabled [ 0.089261] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.089286] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver. [ 0.089316] ... version: 4 [ 0.089317] ... bit width: 48 [ 0.089318] ... generic registers: 4 [ 0.089318] ... value mask: 0000ffffffffffff [ 0.089319] ... max period: 0000ffffffffffff [ 0.089320] ... fixed-purpose events: 3 [ 0.089321] ... event mask: 000000070000000f [ 0.089864] x86: Booting SMP configuration: [ 0.089866] .... node #0, CPUs: #1 [ 0.104344] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.104412] #2 #3 [ 0.133310] x86: Booted up 1 node, 4 CPUs [ 0.133313] smpboot: Total of 4 processors activated (19200.38 BogoMIPS) [ 0.137183] devtmpfs: initialized [ 0.139320] PM: Registering ACPI NVS region [mem 0x73c9e000-0x73c9efff] (4096 bytes) [ 0.139322] PM: Registering ACPI NVS region [mem 0x85f7e000-0x87f7dfff] (33554432 bytes) [ 0.139971] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.140055] pinctrl core: initialized pinctrl subsystem [ 0.140188] NET: Registered protocol family 16 [ 0.149016] cpuidle: using governor ladder [ 0.165041] cpuidle: using governor menu [ 0.165088] Simple Boot Flag at 0x44 set to 0x1 [ 0.165136] ACPI: bus type PCI registered [ 0.165138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.165224] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.165227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.165230] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.165482] PCI: Using configuration type 1 for base access [ 0.177388] ACPI: Added _OSI(Module Device) [ 0.177390] ACPI: Added _OSI(Processor Device) [ 0.177391] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.177392] ACPI: Added _OSI(Processor Aggregator Device) [ 0.183571] ACPI: Executed 17 blocks of module-level executable AML code [ 0.188000] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.191786] ACPI: Dynamic OEM Table Load: [ 0.191797] ACPI: SSDT 0xFFFF880268743C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121220) [ 0.192577] ACPI: Dynamic OEM Table Load: [ 0.192587] ACPI: SSDT 0xFFFF88026989D800 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20121220) [ 0.194445] ACPI: Dynamic OEM Table Load: [ 0.194455] ACPI: SSDT 0xFFFF88026989D000 0005AA (v02 PmRef ApIst 00003000 INTL 20121220) [ 0.195457] ACPI: Dynamic OEM Table Load: [ 0.195465] ACPI: SSDT 0xFFFF8802698DEE00 000119 (v02 PmRef ApCst 00003000 INTL 20121220) [ 0.197975] ACPI : EC: EC started [ 0.200984] ACPI: Interpreter enabled [ 0.200994] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580) [ 0.201003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580) [ 0.201030] ACPI: (supports S0 S3 S4 S5) [ 0.201031] ACPI: Using IOAPIC for interrupt routing [ 0.201067] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.217804] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.217809] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.220216] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.221800] PCI host bridge to bus 0000:00 [ 0.221803] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.221805] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.221807] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.221808] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.221810] pci_bus 0000:00: root bus resource [mem 0x8c800000-0xdfffffff window] [ 0.221811] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.221819] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.222422] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.222436] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] [ 0.222443] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.222447] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.223108] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.223139] pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit] [ 0.223196] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.223779] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.223820] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.223849] pci 0000:00:14.2: reg 0x10: [mem 0xa132a000-0xa132afff 64bit] [ 0.224490] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.224527] pci 0000:00:16.0: reg 0x10: [mem 0xa132b000-0xa132bfff 64bit] [ 0.224586] pci 0000:00:16.0: PME# supported from D3hot [ 0.225206] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.225232] pci 0000:00:17.0: reg 0x10: [mem 0xa1328000-0xa1329fff] [ 0.225241] pci 0000:00:17.0: reg 0x14: [mem 0xa132e000-0xa132e0ff] [ 0.225249] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.225258] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.225266] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.225274] pci 0000:00:17.0: reg 0x24: [mem 0xa132c000-0xa132c7ff] [ 0.225305] pci 0000:00:17.0: PME# supported from D3hot [ 0.225929] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.225989] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.226585] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.226634] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.226695] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.227292] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.227342] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.228044] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.228059] pci 0000:00:1f.2: reg 0x10: [mem 0xa1324000-0xa1327fff] [ 0.228713] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.228752] pci 0000:00:1f.3: reg 0x10: [mem 0xa1320000-0xa1323fff 64bit] [ 0.228787] pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit] [ 0.228820] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.231805] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.231847] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.231901] pci 0000:00:1f.4: reg 0x10: [mem 0xa132d000-0xa132d0ff 64bit] [ 0.231971] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f] [ 0.232691] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.232731] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.232760] pci 0000:01:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit] [ 0.232778] pci 0000:01:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit] [ 0.232843] pci 0000:01:00.0: supports D1 D2 [ 0.232844] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.232887] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.241369] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.241372] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.241375] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff] [ 0.241678] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000 [ 0.242128] pci 0000:02:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit] [ 0.243251] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.243598] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.253530] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.253534] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff] [ 0.254836] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.254889] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.254938] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.254987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255084] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255132] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255180] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.255462] platform MSFT0101:00: failed to claim resource 1 [ 0.255524] acpi MSFT0101:00: platform device creation failed: -16 [ 0.256626] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.256718] ACPI : EC: GPE = 0x4f, I/O: command/status = 0x66, data = 0x62 [ 0.256817] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.256819] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.256821] vgaarb: loaded [ 0.256822] vgaarb: bridge control possible 0000:00:02.0 [ 0.256933] PCI: Using ACPI for IRQ routing [ 0.285037] PCI: pci_cache_line_size set to 64 bytes [ 0.285356] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.285357] e820: reserve RAM buffer [mem 0x73c9e000-0x73ffffff] [ 0.285358] e820: reserve RAM buffer [mem 0x73d79000-0x73ffffff] [ 0.285359] e820: reserve RAM buffer [mem 0x8558e000-0x87ffffff] [ 0.285361] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff] [ 0.285362] e820: reserve RAM buffer [mem 0x272800000-0x273ffffff] [ 0.285531] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.285536] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.287581] clocksource: Switched to clocksource hpet [ 0.292426] pnp: PnP ACPI init [ 0.292522] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.292524] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.292526] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.292527] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.292529] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.292530] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.292532] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.292535] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293098] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.293100] system 00:01: [io 0xffff] has been reserved [ 0.293101] system 00:01: [io 0xffff] has been reserved [ 0.293103] system 00:01: [io 0xffff] has been reserved [ 0.293105] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.293106] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.293108] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293198] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.293234] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.293236] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.293261] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.293284] pnp 00:05: Plug and Play ACPI device, IDs ETD0642 ETD0000 PNP0f13 (active) [ 0.294291] system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.294293] system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.294294] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.294296] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.294297] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.294299] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294748] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.294750] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.294751] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.294753] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.294755] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.294756] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.294758] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.294760] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 0.294761] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.294763] system 00:07: [mem 0x8c800000-0x8c81ffff] has been reserved [ 0.294765] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.295979] pnp: PnP ACPI: found 8 devices [ 0.304397] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.304417] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.304420] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.304424] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff] [ 0.304430] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.304434] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff] [ 0.304441] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.304443] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.304444] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.304446] pci_bus 0000:00: resource 7 [mem 0x8c800000-0xdfffffff window] [ 0.304447] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.304448] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.304450] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff] [ 0.304451] pci_bus 0000:02: resource 1 [mem 0xa1000000-0xa11fffff] [ 0.304605] NET: Registered protocol family 2 [ 0.304787] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.304918] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.305021] TCP: Hash tables configured (established 65536 bind 65536) [ 0.305042] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.305067] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.305179] NET: Registered protocol family 1 [ 0.305193] pci 0000:00:02.0: Video device with shadowed ROM [ 0.306756] PCI: CLS 64 bytes, default 64 [ 0.306795] Unpacking initramfs... [ 0.388910] Freeing initrd memory: 4764K (ffff8800376a2000 - ffff880037b49000) [ 0.388931] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.388934] software IO TLB [mem 0x8158e000-0x8558e000] (64MB) mapped at [ffff88008158e000-ffff88008558dfff] [ 0.389067] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x33 [ 0.389079] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x33 [ 0.389083] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x33 [ 0.389092] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x33 [ 0.389134] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.389462] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.389506] audit: initializing netlink subsys (disabled) [ 0.389519] audit: type=2000 audit(1452160340.400:1): initialized [ 0.389893] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.389910] zbud: loaded [ 0.390097] VFS: Disk quotas dquot_6.6.0 [ 0.390133] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.390978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.391047] io scheduler noop registered [ 0.391049] io scheduler deadline registered [ 0.391082] io scheduler cfq registered (default) [ 0.391776] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.391778] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.391781] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.391798] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 0.391799] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.391802] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 0.391808] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.391814] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.391834] intel_idle: MWAIT substates: 0x11142120 [ 0.391835] intel_idle: v0.4 model 0x4E [ 0.391836] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.392090] GHES: HEST is not enabled! [ 0.392179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.392725] Linux agpgart interface v0.103 [ 0.392769] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 0.392770] AMD IOMMUv2 functionality not available on this system [ 0.393204] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.409304] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.409308] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.409479] mousedev: PS/2 mouse device common for all mice [ 0.409541] rtc_cmos 00:02: RTC can wake from S4 [ 0.410353] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.410434] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.410445] Intel P-state driver initializing. [ 0.410458] intel_pstate: HWP enabled [ 0.410592] intel_pstate: HWP enabled [ 0.410726] intel_pstate: HWP enabled [ 0.410840] intel_pstate: HWP enabled [ 0.410932] ledtrig-cpu: registered to indicate activity on CPUs [ 0.411495] NET: Registered protocol family 10 [ 0.411794] mip6: Mobile IPv6 [ 0.411798] NET: Registered protocol family 17 [ 0.411804] mpls_gso: MPLS GSO support [ 0.412199] registered taskstats version 1 [ 0.412224] zswap: loaded using pool lzo/zbud [ 0.415231] rtc_cmos 00:02: setting system clock to 2016-01-07 09:52:20 UTC (1452160340) [ 0.415300] PM: Hibernation image not present or could not be loaded. [ 0.415673] Freeing unused kernel memory: 1296K (ffffffff81b08000 - ffffffff81c4c000) [ 0.415674] Write protecting the kernel read-only data: 10240k [ 0.416095] Freeing unused kernel memory: 460K (ffff88000158d000 - ffff880001600000) [ 0.416393] Freeing unused kernel memory: 1304K (ffff8800018ba000 - ffff880001a00000) [ 0.419092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.425229] random: systemd-udevd urandom read with 3 bits of entropy available [ 0.457268] SCSI subsystem initialized [ 0.458424] libata version 3.00 loaded. [ 0.459245] ahci 0000:00:17.0: version 3.0 [ 0.471832] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.471837] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.472315] scsi host0: ahci [ 0.472482] scsi host1: ahci [ 0.472532] ata1: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c100 irq 124 [ 0.472546] ata2: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c180 irq 124 [ 0.800225] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.804249] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.804292] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, G801, max UDMA/100 [ 0.805764] ata1.00: ATA-8: HGST HTS545050A7E660, GR2ZB230, max UDMA/133 [ 0.805772] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.807438] ata1.00: configured for UDMA/133 [ 0.808157] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 B230 PQ: 0 ANSI: 5 [ 0.811542] ata2.00: configured for UDMA/100 [ 0.820668] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC G801 PQ: 0 ANSI: 5 [ 0.834118] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.834125] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.834309] sd 0:0:0:0: [sda] Write Protect is off [ 0.834318] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.834370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.141767] sda: sda1 sda2 < sda5 > sda3 [ 1.143546] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.388679] tsc: Refined TSC clocksource calibration: 2399.999 MHz [ 1.388689] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns [ 1.684334] PM: Starting manual resume from disk [ 1.684344] PM: Hibernation image partition 8:5 present [ 1.684347] PM: Looking for hibernation image. [ 1.684561] PM: Image not found (code -22) [ 1.684564] PM: Hibernation image not present or could not be loaded. [ 1.827919] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.389765] clocksource: Switched to clocksource tsc [ 2.667879] random: nonblocking pool is initialized [ 2.700505] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 2.842616] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 2.842977] systemd[1]: Detected architecture x86-64. [ 2.854145] systemd[1]: Set hostname to <cyberwarrior>. [ 4.754887] systemd[1]: NetworkManager-wait-online.service: Cannot add dependency job, ignoring: Unit NetworkManager-wait-online.service failed to load: No such file or directory. [ 4.756746] systemd[1]: Listening on Syslog Socket. [ 4.756972] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.757102] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.757415] systemd[1]: Created slice User and Session Slice. [ 4.757503] systemd[1]: Listening on udev Kernel Socket. [ 4.757537] systemd[1]: Reached target User and Group Name Lookups. [ 4.757566] systemd[1]: Reached target Encrypted Volumes. [ 4.757635] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.757717] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.757952] systemd[1]: Listening on Journal Audit Socket. [ 4.758208] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.758262] systemd[1]: Created slice System Slice. [ 4.758273] systemd[1]: Reached target Slices. [ 4.758323] systemd[1]: Created slice system-getty.slice. [ 4.758370] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.758395] systemd[1]: Listening on udev Control Socket. [ 4.758402] systemd[1]: Reached target Remote File Systems (Pre). [ 4.758407] systemd[1]: Reached target Remote File Systems. [ 4.758432] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.758453] systemd[1]: Listening on Journal Socket. [ 4.758752] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.806664] systemd[1]: Starting Load Kernel Modules... [ 4.808211] systemd[1]: Mounting POSIX Message Queue File System... [ 4.809877] systemd[1]: Starting Nameserver information manager... [ 4.811416] systemd[1]: Mounting Huge Pages File System... [ 4.812999] systemd[1]: Starting LSB: Prepare console... [ 4.814548] systemd[1]: Starting Journal Service... [ 4.815411] systemd[1]: Mounting Debug File System... [ 5.031624] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.033697] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.353762] systemd[1]: Started Journal Service. [ 5.468699] lp: driver loaded but no devices found [ 5.496598] ppdev: user-space parallel port driver [ 5.931785] ACPI: bus type USB registered [ 5.931923] usbcore: registered new interface driver usbfs [ 5.932012] usbcore: registered new interface driver hub [ 5.932109] usbcore: registered new device driver usb [ 6.259878] usbcore: registered new interface driver ath9k_htc [ 7.631990] cfg80211: World regulatory domain updated: [ 7.632002] cfg80211: DFS Master region: unset [ 7.632007] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7.632017] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.632024] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.632029] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7.632036] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7.632043] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7.632049] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7.632054] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7.632060] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8.970925] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 9.056192] systemd-journald[170]: Received request to flush runtime journal from PID 1 [ 9.235570] ACPI: AC Adapter [ADP0] (on-line) [ 9.235659] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 9.235708] ACPI: Lid Switch [LID0] [ 9.235742] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 9.235744] ACPI: Power Button [PWRB] [ 9.235773] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 9.235775] ACPI: Power Button [PWRF] [ 9.289454] tpm_crb MSFT0101:00: ioremap of the command buffer failed [ 9.289521] tpm_crb: probe of MSFT0101:00 failed with error -12 [ 9.373522] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 9.373533] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 9.374641] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 9.374649] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 9.375051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.375056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.375059] usb usb1: Product: xHCI Host Controller [ 9.375061] usb usb1: Manufacturer: Linux 4.3.0-1-amd64 xhci-hcd [ 9.375064] usb usb1: SerialNumber: 0000:00:14.0 [ 9.375296] hub 1-0:1.0: USB hub found [ 9.375321] hub 1-0:1.0: 12 ports detected [ 9.380736] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 9.380743] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 9.380789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 9.380792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.380794] usb usb2: Product: xHCI Host Controller [ 9.380797] usb usb2: Manufacturer: Linux 4.3.0-1-amd64 xhci-hcd [ 9.380799] usb usb2: SerialNumber: 0000:00:14.0 [ 9.381003] hub 2-0:1.0: USB hub found [ 9.381021] hub 2-0:1.0: 6 ports detected [ 9.382592] usb: failed to peer usb2-port3 and usb1-port4 by location (usb2-port3:none) (usb1-port4:usb2-port2) [ 9.382597] usb usb2-port3: failed to peer to usb1-port4 (-16) [ 9.382599] usb: port power management may be unreliable [ 9.383072] usb: failed to peer usb2-port4 and usb1-port4 by location (usb2-port4:none) (usb1-port4:usb2-port2) [ 9.383077] usb usb2-port4: failed to peer to usb1-port4 (-16) [ 9.383559] usb: failed to peer usb2-port5 and usb1-port4 by location (usb2-port5:none) (usb1-port4:usb2-port2) [ 9.383563] usb usb2-port5: failed to peer to usb1-port4 (-16) [ 9.383974] usb: failed to peer usb2-port6 and usb1-port4 by location (usb2-port6:none) (usb1-port4:usb2-port2) [ 9.383977] usb usb2-port6: failed to peer to usb1-port4 (-16) [ 9.415841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.461630] wmi: Mapper loaded [ 9.500900] ACPI: Battery Slot [BAT0] (battery present) [ 9.516236] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405F conflicts with OpRegion 0x0000000000004040-0x000000000000404F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254) [ 9.516258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.527767] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 9.622209] hidraw: raw HID events driver (C) Jiri Kosina [ 9.682030] Bluetooth: Core ver 2.20 [ 9.682071] NET: Registered protocol family 31 [ 9.682076] Bluetooth: HCI device and connection manager initialized [ 9.682087] Bluetooth: HCI socket layer initialized [ 9.682095] Bluetooth: L2CAP socket layer initialized [ 9.682119] Bluetooth: SCO socket layer initialized [ 9.746979] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 9.755854] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.755882] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 9.774768] Bluetooth: HCI UART driver ver 2.3 [ 9.774771] Bluetooth: HCI UART protocol H4 registered [ 9.774773] Bluetooth: HCI UART protocol BCSP registered [ 9.774774] Bluetooth: HCI UART protocol LL registered [ 9.774775] Bluetooth: HCI UART protocol ATH3K registered [ 9.774776] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 9.774797] Bluetooth: HCI UART protocol Intel registered [ 9.774808] Bluetooth: HCI UART protocol BCM registered [ 9.827547] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.837108] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6 [ 9.837641] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc90000c8e000, 50:7b:9d:31:31:13, XID 14100800 IRQ 127 [ 9.837652] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 9.855150] [drm] Initialized drm 1.1.0 20060810 [ 9.866641] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.866645] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.866851] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 9.994171] usb 1-4: New USB device found, idVendor=04f2, idProduct=b50e [ 9.994182] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 9.994189] usb 1-4: Product: Lenovo EasyCamera [ 9.994195] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd. [ 9.994200] usb 1-4: SerialNumber: 0001 [ 10.158299] [drm] Memory usable by graphics device = 4096M [ 10.158312] [drm] Replacing VGA console driver [ 10.160036] Console: switching to colour dummy device 80x25 [ 10.163332] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 10.169419] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.169427] [drm] Driver supports precise vblank timestamp query. [ 10.169876] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.207160] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1.bin [ 10.222958] fbcon: inteldrmfb (fb0) is primary device [ 10.230259] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.230930] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 10.242098] AVX2 version of gcm_enc/dec engaged. [ 10.242101] AES CTR mode by8 optimization enabled [ 10.323460] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03) [ 10.340997] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a. [ 10.351934] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129 [ 10.351939] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.351943] usb 1-5: Product: USB2.0-CRW [ 10.351947] usb 1-5: Manufacturer: Generic [ 10.351950] usb 1-5: SerialNumber: 20100201396000000 [ 10.356821] psmouse serio1: elantech: Elan sample query result 05, 20, 97 [ 10.450605] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 10.451966] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.467879] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.467883] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 10.483839] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.493753] sha256_ssse3: Using AVX2 optimized SHA-256 implementation [ 10.499843] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.515850] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)! [ 10.515869] [drm:intel_dp_aux_ch [i915]] *ERROR* dp_aux_ch not done status 0xad40001f [ 10.539844] ------------[ cut here ]------------ [ 10.539872] WARNING: CPU: 2 PID: 371 at /build/linux-dUKt9u/linux-4.3.3/drivers/gpu/drm/i915/intel_dp.c:854 intel_dp_aux_ch+0x112/0x670 [i915]() [ 10.539873] dp_aux_ch not started status 0xad40001f [ 10.539899] Modules linked in: sha256_ssse3 sha256_generic hmac drbg(+) ansi_cprng aesni_intel(+) i915(+) aes_x86_64 drm_kms_helper snd_hda_intel snd_hda_codec lrw snd_hda_core i2c_hid sr_mod gf128mul drm snd_hwdep r8169 mii snd_pcm hci_uart cdrom btbcm snd_timer sg snd soundcore ideapad_laptop evdev btintel psmouse bluetooth hid glue_helper ablk_helper cryptd mei_me serio_raw i2c_i801 i2c_algo_bit sparse_keymap wmi shpchp battery xhci_pci mei xhci_hcd tpm_crb tpm video acpi_pad button ac processor ath9k_htc ath9k_common ath9k_hw ath mac80211 cfg80211 rfkill usbcore usb_common parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod ahci libahci libata scsi_mod [ 10.539901] CPU: 2 PID: 371 Comm: kworker/2:3 Not tainted 4.3.0-1-amd64 #1 Debian 4.3.3-5 [ 10.539901] Hardware name: LENOVO 80Q7/Paris 5A8, BIOS D5CN28WW 08/13/2015 [ 10.539906] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.539907] 0000000000000000 00000000c1617afb ffffffff812ddce9 ffff880267533988 [ 10.539908] ffffffff81072b1d 00000000ad40001f ffff8802675339e0 00000000fffffff0 [ 10.539909] 0000000000064014 ffff8802679c0000 ffffffff81072bac ffffffffa076b210 [ 10.539910] Call Trace: [ 10.539914] [<ffffffff812ddce9>] ? dump_stack+0x40/0x57 [ 10.539916] [<ffffffff81072b1d>] ? warn_slowpath_common+0x7d/0xb0 [ 10.539917] [<ffffffff81072bac>] ? warn_slowpath_fmt+0x5c/0x80 [ 10.539937] [<ffffffffa07291a2>] ? intel_dp_aux_ch+0x112/0x670 [i915] [ 10.539939] [<ffffffff810b1590>] ? wake_atomic_t_function+0x60/0x60 [ 10.539957] [<ffffffffa07297d0>] ? intel_dp_aux_transfer+0xd0/0x1e0 [i915] [ 10.539959] [<ffffffff810d7c45>] ? hrtimer_try_to_cancel+0x25/0x100 [ 10.539962] [<ffffffffa0676c78>] ? drm_dp_dpcd_access+0x68/0x110 [drm_kms_helper] [ 10.539966] [<ffffffffa0676e27>] ? drm_dp_dpcd_write+0x17/0x20 [drm_kms_helper] [ 10.539986] [<ffffffffa072ba3b>] ? intel_dp_sink_dpms+0x9b/0xe0 [i915] [ 10.540004] [<ffffffffa0720ae3>] ? intel_ddi_post_disable+0x173/0x1e0 [i915] [ 10.540022] [<ffffffffa06fb25b>] ? haswell_crtc_disable+0x12b/0x2c0 [i915] [ 10.540040] [<ffffffffa0703903>] ? intel_atomic_commit+0x123/0x12f0 [i915] [ 10.540052] [<ffffffffa05df384>] ? drm_atomic_check_only+0x214/0x540 [drm] [ 10.540056] [<ffffffffa067e69f>] ? drm_atomic_helper_set_config+0x1af/0x410 [drm_kms_helper] [ 10.540064] [<ffffffffa05cf73e>] ? drm_mode_set_config_internal+0x5e/0xf0 [drm] [ 10.540068] [<ffffffffa06813ca>] ? restore_fbdev_mode+0xaa/0x110 [drm_kms_helper] [ 10.540072] [<ffffffffa0683170>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x60 [drm_kms_helper] [ 10.540075] [<ffffffffa06831d9>] ? drm_fb_helper_set_par+0x29/0x50 [drm_kms_helper] [ 10.540078] [<ffffffffa0683109>] ? drm_fb_helper_hotplug_event+0xb9/0x100 [drm_kms_helper] [ 10.540081] [<ffffffffa067778b>] ? output_poll_execute+0x18b/0x1d0 [drm_kms_helper] [ 10.540083] [<ffffffff8108a40f>] ? process_one_work+0x19f/0x3d0 [ 10.540084] [<ffffffff8108a68d>] ? worker_thread+0x4d/0x450 [ 10.540085] [<ffffffff8108a640>] ? process_one_work+0x3d0/0x3d0 [ 10.540086] [<ffffffff810904bd>] ? kthread+0xcd/0xf0 [ 10.540088] [<ffffffff810903f0>] ? kthread_create_on_node+0x190/0x190 [ 10.540090] [<ffffffff8158514f>] ? ret_from_fork+0x3f/0x70 [ 10.540092] [<ffffffff810903f0>] ? kthread_create_on_node+0x190/0x190 [ 10.540093] ---[ end trace 880d97cedbcc59af ]--- [ 10.653134] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e360 [ 10.653135] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.986136] usbcore: registered new interface driver btusb [ 10.987869] bluetooth hci0: firmware: failed to load qca/rampatch_usb_00000300.bin (-2) [ 10.987871] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000300.bin failed with error -2 [ 10.987872] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000300.bin (-2) [ 11.036592] media: Linux media interface: v0.10 [ 11.257062] Linux video capture interface: v2.00 [ 11.283123] bluetooth hci0: firmware: failed to load qca/rampatch_usb_00000300.bin (-2) [ 11.283126] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000300.bin failed with error -2 [ 11.283131] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000300.bin (-2) [ 11.435762] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b50e) [ 11.440117] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input8 [ 11.440249] usbcore: registered new interface driver uvcvideo [ 11.440250] USB Video Class driver (1.1.1) [ 11.662745] Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k FS [ 11.749560] intel_rapl: Found RAPL domain package [ 11.749562] intel_rapl: Found RAPL domain core [ 11.749564] intel_rapl: Found RAPL domain uncore [ 11.749566] intel_rapl: Found RAPL domain dram [ 11.797244] [drm] RC6 on [ 12.166382] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 12.457546] usbcore: registered new interface driver rtsx_usb [ 16.752718] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training [ 17.521312] [drm:intel_dp_complete_link_train [i915]] *ERROR* failed to start channel equalization [ 18.323697] Console: switching to colour frame buffer device 170x48 [ 18.339048] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 18.339051] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0 [ 18.341743] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 18.463045] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing. [ 18.463425] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 18.463430] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.463433] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 18.463436] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 18.463439] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 18.463442] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 18.463445] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 18.464262] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 18.484765] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 18.486038] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 18.486221] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 18.486388] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 18.486555] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 18.486726] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 19.432440] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw [ 19.449540] r8169 0000:01:00.0 eth0: link down [ 19.449628] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.107532] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.107541] Bluetooth: BNEP filters: protocol multicast [ 23.107551] Bluetooth: BNEP socket layer initialized [ 39.983049] ip_tables: (C) 2000-2006 Netfilter Core Team [ 235.319208] usb 1-3: new high-speed USB device number 5 using xhci_hcd [ 235.505293] usb 1-3: New USB device found, idVendor=0bc2, idProduct=5031 [ 235.505306] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 235.505313] usb 1-3: Product: FreeAgent GoFlex [ 235.505318] usb 1-3: Manufacturer: Seagate [ 235.505323] usb 1-3: SerialNumber: NA0FJWN6 [ 235.540973] usb-storage 1-3:1.0: USB Mass Storage device detected [ 235.541211] scsi host2: usb-storage 1-3:1.0 [ 235.541480] usbcore: registered new interface driver usb-storage [ 235.555820] usbcore: registered new interface driver uas [ 236.552367] scsi 2:0:0:0: Direct-Access Seagate FreeAgent GoFlex 214 PQ: 0 ANSI: 0 [ 236.554091] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 236.554191] sd 2:0:0:0: [sdb] 976773167 512-byte logical blocks: (500 GB/465 GiB) [ 236.554543] sd 2:0:0:0: [sdb] Write Protect is off [ 236.554559] sd 2:0:0:0: [sdb] Mode Sense: 0f 00 00 00 [ 236.554893] sd 2:0:0:0: [sdb] No Caching mode page found [ 236.554906] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 236.596765] sdb: sdb1 [ 236.598555] sd 2:0:0:0: [sdb] Attached SCSI disk [ 237.154309] fuse init (API version 7.23) On 01/07/2016 09:47 AM, Pratik Singhal wrote: > I also have a Lenovo Ideapad, with a different Qualcomm atheros > device. I was able to make it work using the ath10k driver found in > Linux 4.3 kernel and the firmware which was used by Windows 8.1 > I had previously tried working with the firmware available at the > kvalo repository, but unfortunately, that didn't work for me. I > suggest, that if the driver is complaining about missing firmware then > try copy pasting the windows firmware file into the appropriate directory. > > Regards, > Pratik Singhal > ᐧ > > On Thu, Jan 7, 2016 at 11:09 AM, Hsu, Ryan <ryanhsu@qca.qualcomm.com > <mailto:ryanhsu@qca.qualcomm.com>> wrote: > > Can you try this firmware? > > git clone https://github.com/kvalo/ath10k-firmware.git > sudo cp -r ./ath10k-firmware/QCA9377/ /lib/firmware/ath10k/ > sudo ln -s > /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin_WLAN.TF.1.0-00267-1 > /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin > > Otherwise a full dmesg log might be helpful to see what is the > failure. > > Ryan > > > -----Original Message----- > > From: ath10k [mailto:ath10k-bounces@lists.infradead.org > <mailto:ath10k-bounces@lists.infradead.org>] On Behalf Of > > vagner > > Sent: Wednesday, January 06, 2016 11:43 AM > > To: ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > > Subject: Qualcomm Atheros Device 0042 (rev 30) > > > > I Have a new laptop: > > > > Lenovo ideapad 300-15 > > Intel i5 6th generation > > > > Running Debian Stretch/Testing. And my wireless card does not > work. I have > > tried all sort of solutions. Including compiling with backports. > > But, my kernel is new, using the same backports new version. > > How can I make this nightmare card work in my machine? Please, help. > > > > uname -a > > > > 4.3.0-1-amd64 #1 SMP Debian 4.3.3-2 (2015-12-17) x86_64 GNU/Linux > > > > lspci > > > 02:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30) > > > > lshw -C network > > > > > *-network UNCLAIMED > > > description: Network controller > > > product: Qualcomm Atheros > > > vendor: Qualcomm Atheros > > > physical id: 0 > > > bus info: pci@0000:02:00.0 > > > version: 30 > > > width: 64 bits > > > clock: 33MHz > > > capabilities: pm msi pciexpress bus_master cap_list > > > configuration: latency=0 > > > resources: memory:a1000000-a11fffff > > > > Thx > > > > > > _______________________________________________ > > ath10k mailing list > > ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > > http://lists.infradead.org/mailman/listinfo/ath10k > > _______________________________________________ > ath10k mailing list > ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > http://lists.infradead.org/mailman/listinfo/ath10k > > > > > -- > Regards, > Pratik Singhal _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Qualcomm Atheros Device 0042 (rev 30) [not found] ` <CAGf2gkO_je4Q=0_RsYTQZtRorZU3U5fhoj+6+9gH5mFvNy1vFg@mail.gmail.com> 2016-01-07 10:33 ` vagner 2016-01-07 10:39 ` vagner @ 2016-01-07 10:51 ` vagner 2 siblings, 0 replies; 10+ messages in thread From: vagner @ 2016-01-07 10:51 UTC (permalink / raw) To: Pratik Singhal, Hsu, Ryan; +Cc: ath10k And here is my tree from ath10k > tree /lib/firmware/ath10k/ > /lib/firmware/ath10k/ > ├── QCA6174 > │ ├── hw2.1 > │ │ ├── board.bin > │ │ └── firmware-5.bin > │ └── hw3.0 > │ ├── board.bin > │ └── firmware-4.bin > ├── QCA988X > │ └── hw2.0 > │ ├── board.bin > │ ├── firmware-4.bin > │ └── firmware-5.bin > └── QCA99X0 > └── hw2.0 > ├── board.bin > └── firmware-5.bin On 01/07/2016 09:47 AM, Pratik Singhal wrote: > I also have a Lenovo Ideapad, with a different Qualcomm atheros > device. I was able to make it work using the ath10k driver found in > Linux 4.3 kernel and the firmware which was used by Windows 8.1 > I had previously tried working with the firmware available at the > kvalo repository, but unfortunately, that didn't work for me. I > suggest, that if the driver is complaining about missing firmware then > try copy pasting the windows firmware file into the appropriate directory. > > Regards, > Pratik Singhal > ᐧ > > On Thu, Jan 7, 2016 at 11:09 AM, Hsu, Ryan <ryanhsu@qca.qualcomm.com > <mailto:ryanhsu@qca.qualcomm.com>> wrote: > > Can you try this firmware? > > git clone https://github.com/kvalo/ath10k-firmware.git > sudo cp -r ./ath10k-firmware/QCA9377/ /lib/firmware/ath10k/ > sudo ln -s > /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin_WLAN.TF.1.0-00267-1 > /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin > > Otherwise a full dmesg log might be helpful to see what is the > failure. > > Ryan > > > -----Original Message----- > > From: ath10k [mailto:ath10k-bounces@lists.infradead.org > <mailto:ath10k-bounces@lists.infradead.org>] On Behalf Of > > vagner > > Sent: Wednesday, January 06, 2016 11:43 AM > > To: ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > > Subject: Qualcomm Atheros Device 0042 (rev 30) > > > > I Have a new laptop: > > > > Lenovo ideapad 300-15 > > Intel i5 6th generation > > > > Running Debian Stretch/Testing. And my wireless card does not > work. I have > > tried all sort of solutions. Including compiling with backports. > > But, my kernel is new, using the same backports new version. > > How can I make this nightmare card work in my machine? Please, help. > > > > uname -a > > > > 4.3.0-1-amd64 #1 SMP Debian 4.3.3-2 (2015-12-17) x86_64 GNU/Linux > > > > lspci > > > 02:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30) > > > > lshw -C network > > > > > *-network UNCLAIMED > > > description: Network controller > > > product: Qualcomm Atheros > > > vendor: Qualcomm Atheros > > > physical id: 0 > > > bus info: pci@0000:02:00.0 > > > version: 30 > > > width: 64 bits > > > clock: 33MHz > > > capabilities: pm msi pciexpress bus_master cap_list > > > configuration: latency=0 > > > resources: memory:a1000000-a11fffff > > > > Thx > > > > > > _______________________________________________ > > ath10k mailing list > > ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > > http://lists.infradead.org/mailman/listinfo/ath10k > > _______________________________________________ > ath10k mailing list > ath10k@lists.infradead.org <mailto:ath10k@lists.infradead.org> > http://lists.infradead.org/mailman/listinfo/ath10k > > > > > -- > Regards, > Pratik Singhal _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-01-07 16:20 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-01-06 19:43 Qualcomm Atheros Device 0042 (rev 30) vagner 2016-01-07 5:39 ` Hsu, Ryan 2016-01-07 10:20 ` vagner 2016-01-07 11:20 ` Michal Kazior 2016-01-07 12:15 ` vagner 2016-01-07 12:41 ` Michal Kazior 2016-01-07 16:20 ` vagner [not found] ` <CAGf2gkO_je4Q=0_RsYTQZtRorZU3U5fhoj+6+9gH5mFvNy1vFg@mail.gmail.com> 2016-01-07 10:33 ` vagner 2016-01-07 10:39 ` vagner 2016-01-07 10:51 ` vagner
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.