From: takahiro.akashi@linaro.org (AKASHI Takahiro) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 10/19] arm64: kvm: allows kvm cpu hotplug Date: Wed, 27 Jan 2016 16:37:36 +0900 [thread overview] Message-ID: <56A873C0.6090406@linaro.org> (raw) In-Reply-To: <56A7B018.7050900@arm.com> On 01/27/2016 02:42 AM, James Morse wrote: > Hi! > > On 15/01/16 19:18, Geoff Levand wrote: >> From: AKASHI Takahiro <takahiro.akashi@linaro.org> >> >> The current kvm implementation on arm64 does cpu-specific initialization >> at system boot, and has no way to gracefully shutdown a core in terms of >> kvm. This prevents, especially, kexec from rebooting the system on a boot >> core in EL2. >> >> This patch adds a cpu tear-down function and also puts an existing cpu-init >> code into a separate function, kvm_arch_hardware_disable() and >> kvm_arch_hardware_enable() respectively. >> We don't need arm64-specific cpu hotplug hook any more. >> >> Since this patch modifies common part of code between arm and arm64, one >> stub definition, __cpu_reset_hyp_mode(), is added on arm side to avoid >> compiling errors. >> >> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > >> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c >> index e06fd29..e91f80e 100644 >> --- a/arch/arm/kvm/arm.c >> +++ b/arch/arm/kvm/arm.c > >> #ifdef CONFIG_CPU_PM >> static int hyp_init_cpu_pm_notifier(struct notifier_block *self, >> unsigned long cmd, >> void *v) >> { >> - if (cmd == CPU_PM_EXIT && >> - __hyp_get_vectors() == hyp_default_vectors) { >> - cpu_init_hyp_mode(NULL); >> + switch (cmd) { >> + case CPU_PM_ENTER: >> + if (__this_cpu_read(kvm_arm_hardware_enabled)) >> + cpu_reset_hyp_mode(); >> + >> return NOTIFY_OK; >> - } >> + case CPU_PM_EXIT: >> + if (__this_cpu_read(kvm_arm_hardware_enabled)) >> + cpu_init_hyp_mode(); > > I read this as: > if (enabled) > enable(); > > What am I missing? Is there a missing '!'? > > [/me thinks some more] > > I suspect this is trying to be clever: leaving the flag set over a > deep-sleep, to indicate that the hardware should be re-enabled when we > resume... if so, a comment to that effect would be good. Yep, I meant so. Will add some comment. > >> >> - return NOTIFY_DONE; >> + return NOTIFY_OK; >> + >> + default: >> + return NOTIFY_DONE; >> + } >> } >> >> static struct notifier_block hyp_init_cpu_pm_nb = { > >> diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h >> index 3070096..bca79f9 100644 >> --- a/arch/arm64/include/asm/virt.h >> +++ b/arch/arm64/include/asm/virt.h >> @@ -58,9 +58,18 @@ >> >> #define HVC_CALL_FUNC 3 >> >> +/* >> + * HVC_RESET_CPU - Reset cpu in EL2 to initial state. >> + * >> + * @x0: entry address in trampoline code in va >> + * @x1: identical mapping page table in pa >> + */ >> + >> #define BOOT_CPU_MODE_EL1 (0xe11) >> #define BOOT_CPU_MODE_EL2 (0xe12) >> >> +#define HVC_RESET_CPU 4 >> + > > Patch 5 added a fancy new way to call arbitrary functions at el2, why > not use that? (it would save beating up el1_sync again). Let me think. I need to detangle some header files. > I agree the trampoline stuff is complicated - I will try and cook-up a > version of this patch for hibernate that does this. (... and comment > what I think is happening above while I'm at it) > > >> #ifndef __ASSEMBLY__ >> >> /* >> diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S >> index 1d7e502..d909ce2 100644 >> --- a/arch/arm64/kvm/hyp-init.S >> +++ b/arch/arm64/kvm/hyp-init.S >> @@ -140,6 +140,39 @@ merged: >> eret >> ENDPROC(__kvm_hyp_init) >> >> + /* >> + * x0: HYP boot pgd >> + * x1: HYP phys_idmap_start >> + */ >> +ENTRY(__kvm_hyp_reset) >> + /* We're in trampoline code in VA, switch back to boot page tables */ >> + msr ttbr0_el2, x0 >> + isb >> + >> + /* Invalidate the old TLBs */ >> + tlbi alle2 >> + dsb sy >> + >> + /* Branch into PA space */ >> + adr x0, 1f >> + bfi x1, x0, #0, #PAGE_SHIFT >> + br x1 >> + >> + /* We're now in idmap, disable MMU */ >> +1: mrs x0, sctlr_el2 >> + ldr x1, =SCTLR_ELx_FLAGS >> + bic x0, x0, x1 // Clear SCTL_M and etc >> + msr sctlr_el2, x0 >> + isb >> + >> + /* Install stub vectors */ >> + adrp x0, __hyp_stub_vectors >> + add x0, x0, #:lo12:__hyp_stub_vectors > > adr_l ? OK. Thanks, -Takahiro AKASHI >> + msr vbar_el2, x0 >> + >> + eret >> +ENDPROC(__kvm_hyp_reset) >> + >> .ltorg >> >> .popsection >> diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S >> index 15b1ef9..ed82dc2 100644 >> --- a/arch/arm64/kvm/hyp.S >> +++ b/arch/arm64/kvm/hyp.S >> @@ -986,10 +991,27 @@ el1_sync: // Guest trapped into EL2 >> cmp x18, #HVC_GET_VECTORS >> b.ne 1f >> mrs x0, vbar_el2 >> - b 2f >> - >> -1: /* Default to HVC_CALL_HYP. */ >> + b do_eret >> >> + /* jump into trampoline code */ >> +1: cmp x18, #HVC_RESET_CPU >> + b.ne 2f >> + /* >> + * Entry point is: >> + * TRAMPOLINE_VA >> + * + (__kvm_hyp_reset - (__hyp_idmap_text_start & PAGE_MASK)) >> + */ >> + adrp x2, __kvm_hyp_reset >> + add x2, x2, #:lo12:__kvm_hyp_reset >> + adrp x3, __hyp_idmap_text_start >> + add x3, x3, #:lo12:__hyp_idmap_text_start > > adr_l ? > >> + and x3, x3, PAGE_MASK >> + sub x2, x2, x3 >> + ldr x3, =TRAMPOLINE_VA >> + add x2, x2, x3 >> + br x2 // no return >> + >> +2: /* Default to HVC_CALL_HYP. */ >> push lr, xzr >> >> /* > > > Thanks, > > James >
WARNING: multiple messages have this Message-ID (diff)
From: AKASHI Takahiro <takahiro.akashi@linaro.org> To: James Morse <james.morse@arm.com> Cc: Mark Rutland <mark.rutland@arm.com>, Geoff Levand <geoff@infradead.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com>, marc.zyngier@arm.com, linux-arm-kernel@lists.infradead.org, kexec@lists.infradead.org, christoffer.dall@linaro.org Subject: Re: [PATCH 10/19] arm64: kvm: allows kvm cpu hotplug Date: Wed, 27 Jan 2016 16:37:36 +0900 [thread overview] Message-ID: <56A873C0.6090406@linaro.org> (raw) In-Reply-To: <56A7B018.7050900@arm.com> On 01/27/2016 02:42 AM, James Morse wrote: > Hi! > > On 15/01/16 19:18, Geoff Levand wrote: >> From: AKASHI Takahiro <takahiro.akashi@linaro.org> >> >> The current kvm implementation on arm64 does cpu-specific initialization >> at system boot, and has no way to gracefully shutdown a core in terms of >> kvm. This prevents, especially, kexec from rebooting the system on a boot >> core in EL2. >> >> This patch adds a cpu tear-down function and also puts an existing cpu-init >> code into a separate function, kvm_arch_hardware_disable() and >> kvm_arch_hardware_enable() respectively. >> We don't need arm64-specific cpu hotplug hook any more. >> >> Since this patch modifies common part of code between arm and arm64, one >> stub definition, __cpu_reset_hyp_mode(), is added on arm side to avoid >> compiling errors. >> >> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> > >> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c >> index e06fd29..e91f80e 100644 >> --- a/arch/arm/kvm/arm.c >> +++ b/arch/arm/kvm/arm.c > >> #ifdef CONFIG_CPU_PM >> static int hyp_init_cpu_pm_notifier(struct notifier_block *self, >> unsigned long cmd, >> void *v) >> { >> - if (cmd == CPU_PM_EXIT && >> - __hyp_get_vectors() == hyp_default_vectors) { >> - cpu_init_hyp_mode(NULL); >> + switch (cmd) { >> + case CPU_PM_ENTER: >> + if (__this_cpu_read(kvm_arm_hardware_enabled)) >> + cpu_reset_hyp_mode(); >> + >> return NOTIFY_OK; >> - } >> + case CPU_PM_EXIT: >> + if (__this_cpu_read(kvm_arm_hardware_enabled)) >> + cpu_init_hyp_mode(); > > I read this as: > if (enabled) > enable(); > > What am I missing? Is there a missing '!'? > > [/me thinks some more] > > I suspect this is trying to be clever: leaving the flag set over a > deep-sleep, to indicate that the hardware should be re-enabled when we > resume... if so, a comment to that effect would be good. Yep, I meant so. Will add some comment. > >> >> - return NOTIFY_DONE; >> + return NOTIFY_OK; >> + >> + default: >> + return NOTIFY_DONE; >> + } >> } >> >> static struct notifier_block hyp_init_cpu_pm_nb = { > >> diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h >> index 3070096..bca79f9 100644 >> --- a/arch/arm64/include/asm/virt.h >> +++ b/arch/arm64/include/asm/virt.h >> @@ -58,9 +58,18 @@ >> >> #define HVC_CALL_FUNC 3 >> >> +/* >> + * HVC_RESET_CPU - Reset cpu in EL2 to initial state. >> + * >> + * @x0: entry address in trampoline code in va >> + * @x1: identical mapping page table in pa >> + */ >> + >> #define BOOT_CPU_MODE_EL1 (0xe11) >> #define BOOT_CPU_MODE_EL2 (0xe12) >> >> +#define HVC_RESET_CPU 4 >> + > > Patch 5 added a fancy new way to call arbitrary functions at el2, why > not use that? (it would save beating up el1_sync again). Let me think. I need to detangle some header files. > I agree the trampoline stuff is complicated - I will try and cook-up a > version of this patch for hibernate that does this. (... and comment > what I think is happening above while I'm at it) > > >> #ifndef __ASSEMBLY__ >> >> /* >> diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S >> index 1d7e502..d909ce2 100644 >> --- a/arch/arm64/kvm/hyp-init.S >> +++ b/arch/arm64/kvm/hyp-init.S >> @@ -140,6 +140,39 @@ merged: >> eret >> ENDPROC(__kvm_hyp_init) >> >> + /* >> + * x0: HYP boot pgd >> + * x1: HYP phys_idmap_start >> + */ >> +ENTRY(__kvm_hyp_reset) >> + /* We're in trampoline code in VA, switch back to boot page tables */ >> + msr ttbr0_el2, x0 >> + isb >> + >> + /* Invalidate the old TLBs */ >> + tlbi alle2 >> + dsb sy >> + >> + /* Branch into PA space */ >> + adr x0, 1f >> + bfi x1, x0, #0, #PAGE_SHIFT >> + br x1 >> + >> + /* We're now in idmap, disable MMU */ >> +1: mrs x0, sctlr_el2 >> + ldr x1, =SCTLR_ELx_FLAGS >> + bic x0, x0, x1 // Clear SCTL_M and etc >> + msr sctlr_el2, x0 >> + isb >> + >> + /* Install stub vectors */ >> + adrp x0, __hyp_stub_vectors >> + add x0, x0, #:lo12:__hyp_stub_vectors > > adr_l ? OK. Thanks, -Takahiro AKASHI >> + msr vbar_el2, x0 >> + >> + eret >> +ENDPROC(__kvm_hyp_reset) >> + >> .ltorg >> >> .popsection >> diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S >> index 15b1ef9..ed82dc2 100644 >> --- a/arch/arm64/kvm/hyp.S >> +++ b/arch/arm64/kvm/hyp.S >> @@ -986,10 +991,27 @@ el1_sync: // Guest trapped into EL2 >> cmp x18, #HVC_GET_VECTORS >> b.ne 1f >> mrs x0, vbar_el2 >> - b 2f >> - >> -1: /* Default to HVC_CALL_HYP. */ >> + b do_eret >> >> + /* jump into trampoline code */ >> +1: cmp x18, #HVC_RESET_CPU >> + b.ne 2f >> + /* >> + * Entry point is: >> + * TRAMPOLINE_VA >> + * + (__kvm_hyp_reset - (__hyp_idmap_text_start & PAGE_MASK)) >> + */ >> + adrp x2, __kvm_hyp_reset >> + add x2, x2, #:lo12:__kvm_hyp_reset >> + adrp x3, __hyp_idmap_text_start >> + add x3, x3, #:lo12:__hyp_idmap_text_start > > adr_l ? > >> + and x3, x3, PAGE_MASK >> + sub x2, x2, x3 >> + ldr x3, =TRAMPOLINE_VA >> + add x2, x2, x3 >> + br x2 // no return >> + >> +2: /* Default to HVC_CALL_HYP. */ >> push lr, xzr >> >> /* > > > Thanks, > > James > _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec
next prev parent reply other threads:[~2016-01-27 7:37 UTC|newest] Thread overview: 174+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-01-15 19:18 [PATCH 00/19] arm64 kexec kernel patches v13 Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 07/19] arm64: Add back cpu_reset routines Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 03/19] arm64: Add new asm macro copy_page Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-20 14:01 ` James Morse 2016-01-20 14:01 ` James Morse 2016-01-15 19:18 ` [PATCH 05/19] arm64: Convert hcalls to use HVC immediate value Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 02/19] arm64: kernel: Include _AC definition in page.h Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-18 10:05 ` Mark Rutland 2016-01-18 10:05 ` Mark Rutland 2016-01-15 19:18 ` [PATCH 09/19] Revert "arm64: remove dead code" Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:55 ` Mark Rutland 2016-01-15 19:55 ` Mark Rutland 2016-01-20 21:18 ` Geoff Levand 2016-01-20 21:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 04/19] arm64: Cleanup SCTLR flags Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 20:07 ` Mark Rutland 2016-01-15 20:07 ` Mark Rutland 2016-01-18 10:12 ` Marc Zyngier 2016-01-18 10:12 ` Marc Zyngier 2016-01-19 11:59 ` Dave Martin 2016-01-19 11:59 ` Dave Martin 2016-01-25 15:09 ` James Morse 2016-01-25 15:09 ` James Morse 2016-01-15 19:18 ` [PATCH 08/19] Revert "arm64: mm: remove unused cpu_set_idmap_tcr_t0sz function" Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 01/19] arm64: Fold proc-macros.S into assembler.h Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 06/19] arm64: Add new hcall HVC_CALL_FUNC Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 17/19] arm64: kdump: enable kdump in the arm64 defconfig Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 15/19] arm64: kdump: implement machine_crash_shutdown() Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 19/19] arm64: kdump: relax BUG_ON() if more than one cpus are still active Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 12/19] arm64/kexec: Enable kexec in the arm64 defconfig Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 18/19] arm64: kdump: update a kernel doc Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 20:16 ` Mark Rutland 2016-01-15 20:16 ` Mark Rutland 2016-01-18 10:26 ` AKASHI Takahiro 2016-01-18 10:26 ` AKASHI Takahiro 2016-01-18 11:29 ` Mark Rutland 2016-01-18 11:29 ` Mark Rutland 2016-01-19 5:31 ` AKASHI Takahiro 2016-01-19 5:31 ` AKASHI Takahiro 2016-01-19 12:10 ` Mark Rutland 2016-01-19 12:10 ` Mark Rutland 2016-01-20 4:34 ` AKASHI Takahiro 2016-01-20 4:34 ` AKASHI Takahiro 2016-01-19 1:43 ` Dave Young 2016-01-19 1:43 ` Dave Young 2016-01-19 1:50 ` Dave Young 2016-01-19 1:50 ` Dave Young 2016-01-19 5:35 ` AKASHI Takahiro 2016-01-19 5:35 ` AKASHI Takahiro 2016-01-19 12:28 ` Dave Young 2016-01-19 12:28 ` Dave Young 2016-01-19 12:51 ` Mark Rutland 2016-01-19 12:51 ` Mark Rutland 2016-01-19 13:45 ` Dave Young 2016-01-19 13:45 ` Dave Young 2016-01-19 14:01 ` Mark Rutland 2016-01-19 14:01 ` Mark Rutland 2016-01-20 2:49 ` Dave Young 2016-01-20 2:49 ` Dave Young 2016-01-20 6:07 ` AKASHI Takahiro 2016-01-20 6:07 ` AKASHI Takahiro 2016-01-20 6:38 ` Dave Young 2016-01-20 6:38 ` Dave Young 2016-01-20 7:00 ` Dave Young 2016-01-20 7:00 ` Dave Young 2016-01-20 8:01 ` AKASHI Takahiro 2016-01-20 8:01 ` AKASHI Takahiro 2016-01-20 8:26 ` Dave Young 2016-01-20 8:26 ` Dave Young 2016-01-20 11:54 ` Mark Rutland 2016-01-20 11:54 ` Mark Rutland 2016-01-21 2:57 ` Dave Young 2016-01-21 2:57 ` Dave Young 2016-01-21 3:03 ` Dave Young 2016-01-21 3:03 ` Dave Young 2016-01-20 11:49 ` Mark Rutland 2016-01-20 11:49 ` Mark Rutland 2016-01-21 6:53 ` AKASHI Takahiro 2016-01-21 6:53 ` AKASHI Takahiro 2016-01-21 12:02 ` Mark Rutland 2016-01-21 12:02 ` Mark Rutland 2016-01-22 6:23 ` AKASHI Takahiro 2016-01-22 6:23 ` AKASHI Takahiro 2016-01-22 11:13 ` Mark Rutland 2016-01-22 11:13 ` Mark Rutland 2016-02-02 5:18 ` AKASHI Takahiro 2016-02-02 5:18 ` AKASHI Takahiro 2016-01-25 3:19 ` Dave Young 2016-01-25 3:19 ` Dave Young 2016-01-25 4:23 ` Dave Young 2016-01-25 4:23 ` Dave Young 2016-01-20 11:28 ` Mark Rutland 2016-01-20 11:28 ` Mark Rutland 2016-01-21 2:54 ` Dave Young 2016-01-21 2:54 ` Dave Young 2016-01-20 5:25 ` AKASHI Takahiro 2016-01-20 5:25 ` AKASHI Takahiro 2016-01-20 12:02 ` Mark Rutland 2016-01-20 12:02 ` Mark Rutland 2016-01-20 12:36 ` Mark Rutland 2016-01-20 12:36 ` Mark Rutland 2016-01-20 14:59 ` Ard Biesheuvel 2016-01-20 14:59 ` Ard Biesheuvel 2016-01-20 15:04 ` Mark Rutland 2016-01-20 15:04 ` Mark Rutland 2016-01-21 5:43 ` AKASHI Takahiro 2016-01-21 5:43 ` AKASHI Takahiro 2016-01-21 13:02 ` Mark Rutland 2016-01-21 13:02 ` Mark Rutland 2016-01-19 12:17 ` Mark Rutland 2016-01-19 12:17 ` Mark Rutland 2016-01-19 13:52 ` Dave Young 2016-01-19 13:52 ` Dave Young 2016-01-19 14:05 ` Mark Rutland 2016-01-19 14:05 ` Mark Rutland 2016-01-20 2:54 ` Dave Young 2016-01-20 2:54 ` Dave Young 2016-01-15 19:18 ` [PATCH 10/19] arm64: kvm: allows kvm cpu hotplug Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-26 17:42 ` James Morse 2016-01-26 17:42 ` James Morse 2016-01-27 7:37 ` AKASHI Takahiro [this message] 2016-01-27 7:37 ` AKASHI Takahiro 2016-01-15 19:18 ` [PATCH 14/19] arm64: kdump: reserve memory for crash dump kernel Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 11/19] arm64/kexec: Add core kexec support Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 13/19] arm64/kexec: Add pr_debug output Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-15 19:18 ` [PATCH 16/19] arm64: kdump: add kdump support Geoff Levand 2016-01-15 19:18 ` Geoff Levand 2016-01-21 14:17 ` James Morse 2016-01-21 14:17 ` James Morse 2016-01-22 4:50 ` AKASHI Takahiro 2016-01-22 4:50 ` AKASHI Takahiro 2016-01-19 12:32 ` [PATCH 00/19] arm64 kexec kernel patches v13 Dave Young 2016-01-19 12:32 ` Dave Young 2016-01-20 0:15 ` Geoff Levand 2016-01-20 0:15 ` Geoff Levand 2016-01-20 2:56 ` Dave Young 2016-01-20 2:56 ` Dave Young 2016-01-20 21:15 ` Geoff Levand 2016-01-20 21:15 ` Geoff Levand 2016-01-21 12:11 ` Mark Rutland 2016-01-21 12:11 ` Mark Rutland [not found] ` <c7575f853ccc491bb0212e025aab1cc9@NASANEXM01H.na.qualcomm.com> 2016-03-01 17:54 ` Azriel Samson 2016-03-01 17:54 ` Azriel Samson 2016-03-02 1:17 ` Geoff Levand 2016-03-02 1:17 ` Geoff Levand 2016-03-02 1:38 ` Will Deacon 2016-03-02 1:38 ` Will Deacon 2016-03-02 2:28 ` AKASHI Takahiro 2016-03-02 2:28 ` AKASHI Takahiro 2016-03-02 8:07 ` Marc Zyngier 2016-03-02 8:07 ` Marc Zyngier 2016-03-02 12:33 ` Pratyush Anand 2016-03-02 12:33 ` Pratyush Anand 2016-03-02 16:51 ` Azriel Samson 2016-03-02 16:51 ` Azriel Samson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=56A873C0.6090406@linaro.org \ --to=takahiro.akashi@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.