* [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property
@ 2016-03-03 14:18 Marcel Apfelbaum
2016-03-14 15:21 ` Marcel Apfelbaum
2016-03-15 8:00 ` Cao jin
0 siblings, 2 replies; 7+ messages in thread
From: Marcel Apfelbaum @ 2016-03-03 14:18 UTC (permalink / raw)
To: qemu-devel; +Cc: marcel, ehabkost, laine, mst
Add a chassis_nr property instead of using PXB bus number
as internal bridge's chassis nr.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
---
v3->v4:
- re-coded to fit current codebase
v2->v3:
- use bus nr if chassis nr is 0 (Micahel S. Tsirkin)
v1->v2:
- Rebased on master
docs/pci_expander_bridge.txt | 7 +++----
hw/pci-bridge/pci_expander_bridge.c | 21 +++++++++++++++++++--
2 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/docs/pci_expander_bridge.txt b/docs/pci_expander_bridge.txt
index e7c8fe9..fe058a6 100644
--- a/docs/pci_expander_bridge.txt
+++ b/docs/pci_expander_bridge.txt
@@ -23,9 +23,9 @@ A detailed command line would be:
-m 2G
-object memory-backend-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 -numa node,nodeid=0,cpus=0,memdev=ram-node0
-object memory-backend-ram,size=1024M,policy=bind,host-nodes=1,id=ram-node1 -numa node,nodeid=1,cpus=1,memdev=ram-node1
--device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4 -netdev user,id=nd -device e1000,bus=bridge1,addr=0x4,netdev=nd
--device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8, -device e1000,bus=bridge2,addr=0x3
--device pxb,id=bridge3,bus=pci.0,bus_nr=40, -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1
+-device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4,chassis_nr=1 -netdev user,id=nd -device e1000,bus=bridge1,addr=0x4,netdev=nd
+-device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8,chassis_nr=2 -device e1000,bus=bridge2,addr=0x3
+-device pxb,id=bridge3,bus=pci.0,bus_nr=40,chassis_nr=3 -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1
Here you have:
- 2 NUMA nodes for the guest, 0 and 1. (both mapped to the same NUMA node in host, but you can and should put it in different host NUMA nodes)
@@ -55,4 +55,3 @@ The PXB is composed by:
- Using the bridge will enable hotplug support
- All the devices behind the bridge will use bridge's IO/MEM windows compacting
the PCI address space.
-
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index d23b8da..6c4873a 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -46,6 +46,7 @@ typedef struct PXBDev {
PCIDevice parent_obj;
/*< public >*/
+ uint8_t chassis_nr;
uint8_t bus_nr;
uint16_t numa_node;
} PXBDev;
@@ -237,7 +238,8 @@ static int pxb_dev_init_common(PCIDevice *dev, bool pcie)
bus = pci_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
bds = qdev_create(BUS(bus), "pci-bridge");
bds->id = dev_name;
- qdev_prop_set_uint8(bds, PCI_BRIDGE_DEV_PROP_CHASSIS_NR, pxb->bus_nr);
+ qdev_prop_set_uint8(bds, PCI_BRIDGE_DEV_PROP_CHASSIS_NR,
+ pxb->chassis_nr);
qdev_prop_set_bit(bds, PCI_BRIDGE_DEV_PROP_SHPC, false);
}
@@ -267,11 +269,17 @@ static int pxb_dev_init_common(PCIDevice *dev, bool pcie)
static int pxb_dev_initfn(PCIDevice *dev)
{
+ PXBDev *pxb = convert_to_pxb(dev);
+
if (pci_bus_is_express(dev->bus)) {
error_report("pxb devices cannot reside on a PCIe bus!");
return -EINVAL;
}
+ if (!pxb->chassis_nr) {
+ pxb->chassis_nr = pxb->bus_nr;
+ }
+
return pxb_dev_init_common(dev, false);
}
@@ -286,6 +294,8 @@ static Property pxb_dev_properties[] = {
/* Note: 0 is not a legal a PXB bus number. */
DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
+ /* Note: 0 is not a legal chassis number. */
+ DEFINE_PROP_UINT8("chassis_nr", PXBDev, chassis_nr, 0),
DEFINE_PROP_END_OF_LIST(),
};
@@ -322,6 +332,13 @@ static int pxb_pcie_dev_initfn(PCIDevice *dev)
return pxb_dev_init_common(dev, true);
}
+static Property pxb_pcie_dev_properties[] = {
+ /* Note: 0 is not a legal a PXB bus number. */
+ DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
+ DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
static void pxb_pcie_dev_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
@@ -334,7 +351,7 @@ static void pxb_pcie_dev_class_init(ObjectClass *klass, void *data)
k->class_id = PCI_CLASS_BRIDGE_HOST;
dc->desc = "PCI Express Expander Bridge";
- dc->props = pxb_dev_properties;
+ dc->props = pxb_pcie_dev_properties;
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
}
--
2.4.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property
2016-03-03 14:18 [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property Marcel Apfelbaum
@ 2016-03-14 15:21 ` Marcel Apfelbaum
2016-03-15 8:00 ` Cao jin
1 sibling, 0 replies; 7+ messages in thread
From: Marcel Apfelbaum @ 2016-03-14 15:21 UTC (permalink / raw)
To: Marcel Apfelbaum, qemu-devel; +Cc: ehabkost, laine, mst
On 03/03/2016 04:18 PM, Marcel Apfelbaum wrote:
> Add a chassis_nr property instead of using PXB bus number
> as internal bridge's chassis nr.
ping
Thanks,
Marcel
>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
> ---
> v3->v4:
> - re-coded to fit current codebase
> v2->v3:
> - use bus nr if chassis nr is 0 (Micahel S. Tsirkin)
> v1->v2:
> - Rebased on master
>
> docs/pci_expander_bridge.txt | 7 +++----
> hw/pci-bridge/pci_expander_bridge.c | 21 +++++++++++++++++++--
> 2 files changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/docs/pci_expander_bridge.txt b/docs/pci_expander_bridge.txt
> index e7c8fe9..fe058a6 100644
> --- a/docs/pci_expander_bridge.txt
> +++ b/docs/pci_expander_bridge.txt
> @@ -23,9 +23,9 @@ A detailed command line would be:
> -m 2G
> -object memory-backend-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 -numa node,nodeid=0,cpus=0,memdev=ram-node0
> -object memory-backend-ram,size=1024M,policy=bind,host-nodes=1,id=ram-node1 -numa node,nodeid=1,cpus=1,memdev=ram-node1
> --device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4 -netdev user,id=nd -device e1000,bus=bridge1,addr=0x4,netdev=nd
> --device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8, -device e1000,bus=bridge2,addr=0x3
> --device pxb,id=bridge3,bus=pci.0,bus_nr=40, -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1
> +-device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4,chassis_nr=1 -netdev user,id=nd -device e1000,bus=bridge1,addr=0x4,netdev=nd
> +-device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8,chassis_nr=2 -device e1000,bus=bridge2,addr=0x3
> +-device pxb,id=bridge3,bus=pci.0,bus_nr=40,chassis_nr=3 -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1
>
> Here you have:
> - 2 NUMA nodes for the guest, 0 and 1. (both mapped to the same NUMA node in host, but you can and should put it in different host NUMA nodes)
> @@ -55,4 +55,3 @@ The PXB is composed by:
> - Using the bridge will enable hotplug support
> - All the devices behind the bridge will use bridge's IO/MEM windows compacting
> the PCI address space.
> -
> diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
> index d23b8da..6c4873a 100644
> --- a/hw/pci-bridge/pci_expander_bridge.c
> +++ b/hw/pci-bridge/pci_expander_bridge.c
> @@ -46,6 +46,7 @@ typedef struct PXBDev {
> PCIDevice parent_obj;
> /*< public >*/
>
> + uint8_t chassis_nr;
> uint8_t bus_nr;
> uint16_t numa_node;
> } PXBDev;
> @@ -237,7 +238,8 @@ static int pxb_dev_init_common(PCIDevice *dev, bool pcie)
> bus = pci_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
> bds = qdev_create(BUS(bus), "pci-bridge");
> bds->id = dev_name;
> - qdev_prop_set_uint8(bds, PCI_BRIDGE_DEV_PROP_CHASSIS_NR, pxb->bus_nr);
> + qdev_prop_set_uint8(bds, PCI_BRIDGE_DEV_PROP_CHASSIS_NR,
> + pxb->chassis_nr);
> qdev_prop_set_bit(bds, PCI_BRIDGE_DEV_PROP_SHPC, false);
> }
>
> @@ -267,11 +269,17 @@ static int pxb_dev_init_common(PCIDevice *dev, bool pcie)
>
> static int pxb_dev_initfn(PCIDevice *dev)
> {
> + PXBDev *pxb = convert_to_pxb(dev);
> +
> if (pci_bus_is_express(dev->bus)) {
> error_report("pxb devices cannot reside on a PCIe bus!");
> return -EINVAL;
> }
>
> + if (!pxb->chassis_nr) {
> + pxb->chassis_nr = pxb->bus_nr;
> + }
> +
> return pxb_dev_init_common(dev, false);
> }
>
> @@ -286,6 +294,8 @@ static Property pxb_dev_properties[] = {
> /* Note: 0 is not a legal a PXB bus number. */
> DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
> DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
> + /* Note: 0 is not a legal chassis number. */
> + DEFINE_PROP_UINT8("chassis_nr", PXBDev, chassis_nr, 0),
> DEFINE_PROP_END_OF_LIST(),
> };
>
> @@ -322,6 +332,13 @@ static int pxb_pcie_dev_initfn(PCIDevice *dev)
> return pxb_dev_init_common(dev, true);
> }
>
> +static Property pxb_pcie_dev_properties[] = {
> + /* Note: 0 is not a legal a PXB bus number. */
> + DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
> + DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> static void pxb_pcie_dev_class_init(ObjectClass *klass, void *data)
> {
> DeviceClass *dc = DEVICE_CLASS(klass);
> @@ -334,7 +351,7 @@ static void pxb_pcie_dev_class_init(ObjectClass *klass, void *data)
> k->class_id = PCI_CLASS_BRIDGE_HOST;
>
> dc->desc = "PCI Express Expander Bridge";
> - dc->props = pxb_dev_properties;
> + dc->props = pxb_pcie_dev_properties;
> set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> }
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property
2016-03-03 14:18 [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property Marcel Apfelbaum
2016-03-14 15:21 ` Marcel Apfelbaum
@ 2016-03-15 8:00 ` Cao jin
2016-03-15 11:44 ` Marcel Apfelbaum
1 sibling, 1 reply; 7+ messages in thread
From: Cao jin @ 2016-03-15 8:00 UTC (permalink / raw)
To: Marcel Apfelbaum, qemu-devel; +Cc: marcel, ehabkost, laine, mst
Hi,
On 03/03/2016 10:18 PM, Marcel Apfelbaum wrote:
> Add a chassis_nr property instead of using PXB bus number
> as internal bridge's chassis nr.
>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
> ---
> v3->v4:
> - re-coded to fit current codebase
> v2->v3:
> - use bus nr if chassis nr is 0 (Micahel S. Tsirkin)
> v1->v2:
> - Rebased on master
>
> docs/pci_expander_bridge.txt | 7 +++----
> hw/pci-bridge/pci_expander_bridge.c | 21 +++++++++++++++++++--
> 2 files changed, 22 insertions(+), 6 deletions(-)
>
>
> @@ -286,6 +294,8 @@ static Property pxb_dev_properties[] = {
> /* Note: 0 is not a legal a PXB bus number. */
better remove the latter "a", or I guess it will conflict with my
previous pxb cleanup patch.
> DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
> DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
> + /* Note: 0 is not a legal chassis number. */
> + DEFINE_PROP_UINT8("chassis_nr", PXBDev, chassis_nr, 0),
> DEFINE_PROP_END_OF_LIST(),
> };
>
> @@ -322,6 +332,13 @@ static int pxb_pcie_dev_initfn(PCIDevice *dev)
> return pxb_dev_init_common(dev, true);
> }
>
> +static Property pxb_pcie_dev_properties[] = {
> + /* Note: 0 is not a legal a PXB bus number. */
likewise
> + DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
> + DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
> + DEFINE_PROP_END_OF_LIST(),
> +};
And I have another personal question: In qemu design, it seems every pci
bridge reside in a separate chassis, what`s benefit? why don`t put them
all in the main chassis?
--
Yours Sincerely,
Cao jin
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property
2016-03-15 8:00 ` Cao jin
@ 2016-03-15 11:44 ` Marcel Apfelbaum
2016-03-17 10:02 ` Cao jin
0 siblings, 1 reply; 7+ messages in thread
From: Marcel Apfelbaum @ 2016-03-15 11:44 UTC (permalink / raw)
To: Cao jin, qemu-devel; +Cc: marcel, ehabkost, laine, mst
On 03/15/2016 10:00 AM, Cao jin wrote:
> Hi,
>
> On 03/03/2016 10:18 PM, Marcel Apfelbaum wrote:
>> Add a chassis_nr property instead of using PXB bus number
>> as internal bridge's chassis nr.
>>
>> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
>> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
>> ---
>> v3->v4:
>> - re-coded to fit current codebase
>> v2->v3:
>> - use bus nr if chassis nr is 0 (Micahel S. Tsirkin)
>> v1->v2:
>> - Rebased on master
>>
>> docs/pci_expander_bridge.txt | 7 +++----
>> hw/pci-bridge/pci_expander_bridge.c | 21 +++++++++++++++++++--
>> 2 files changed, 22 insertions(+), 6 deletions(-)
>>
>
>>
>> @@ -286,6 +294,8 @@ static Property pxb_dev_properties[] = {
>> /* Note: 0 is not a legal a PXB bus number. */
>
> better remove the latter "a", or I guess it will conflict with my previous pxb cleanup patch.
sure, thanks for bringing it up.
>
>> DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
>> DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
>> + /* Note: 0 is not a legal chassis number. */
>> + DEFINE_PROP_UINT8("chassis_nr", PXBDev, chassis_nr, 0),
>> DEFINE_PROP_END_OF_LIST(),
>> };
>>
>> @@ -322,6 +332,13 @@ static int pxb_pcie_dev_initfn(PCIDevice *dev)
>> return pxb_dev_init_common(dev, true);
>> }
>>
>> +static Property pxb_pcie_dev_properties[] = {
>> + /* Note: 0 is not a legal a PXB bus number. */
>
> likewise
ok
>
>> + DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
>> + DEFINE_PROP_UINT16("numa_node", PXBDev, numa_node, NUMA_NODE_UNASSIGNED),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>
> And I have another personal question: In qemu design, it seems every pci bridge reside in a separate chassis, what`s benefit? why don`t put them all in the main chassis?
Please have a look on pci-to-pci bridge specification, chapter 13, slot numbering.
Thanks for the review,
Marcel
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property
2016-03-15 11:44 ` Marcel Apfelbaum
@ 2016-03-17 10:02 ` Cao jin
2016-03-24 15:34 ` Marcel Apfelbaum
0 siblings, 1 reply; 7+ messages in thread
From: Cao jin @ 2016-03-17 10:02 UTC (permalink / raw)
To: Marcel Apfelbaum, qemu-devel; +Cc: ehabkost, laine, mst
hi
On 03/15/2016 07:44 PM, Marcel Apfelbaum wrote:
> On 03/15/2016 10:00 AM, Cao jin wrote:
>>
>> And I have another personal question: In qemu design, it seems every
>> pci bridge reside in a separate chassis, what`s benefit? why don`t
>> put them all in the main chassis?
>
> Please have a look on pci-to-pci bridge specification, chapter 13, slot
> numbering.
>
thanks for the hint.
I still have a question: in docs/pci_expander_bridge.txt, it says:
create a TYPE_PCI_BRIDGE_DEV to enable hotplug support.
But I didn`t see it can hotplug as following step:
1: ./qemu-system-x86_64 -device pxb,id=br,bus=pci.0,bus_nr=2 -hda
linux.img -smp 2 --enable-kvm -m 1024 -monitor stdio
2: in monitor, type: device_add e1000,bus=br
result: no message output to monitor, and don`t see e1000 nic in guest
Is is a bug or I test it in a wrong way?
--
Yours Sincerely,
Cao jin
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property
2016-03-17 10:02 ` Cao jin
@ 2016-03-24 15:34 ` Marcel Apfelbaum
2016-03-25 6:28 ` Cao jin
0 siblings, 1 reply; 7+ messages in thread
From: Marcel Apfelbaum @ 2016-03-24 15:34 UTC (permalink / raw)
To: Cao jin, Marcel Apfelbaum, qemu-devel; +Cc: ehabkost, laine, mst
On 03/17/2016 12:02 PM, Cao jin wrote:
> hi
>
> On 03/15/2016 07:44 PM, Marcel Apfelbaum wrote:
>> On 03/15/2016 10:00 AM, Cao jin wrote:
>
>>>
>>> And I have another personal question: In qemu design, it seems every
>>> pci bridge reside in a separate chassis, what`s benefit? why don`t
>>> put them all in the main chassis?
>>
>> Please have a look on pci-to-pci bridge specification, chapter 13, slot
>> numbering.
>>
>
> thanks for the hint.
> I still have a question: in docs/pci_expander_bridge.txt, it says: create a TYPE_PCI_BRIDGE_DEV to enable hotplug support.
> But I didn`t see it can hotplug as following step:
>
> 1: ./qemu-system-x86_64 -device pxb,id=br,bus=pci.0,bus_nr=2 -hda linux.img -smp 2 --enable-kvm -m 1024 -monitor stdio
>
> 2: in monitor, type: device_add e1000,bus=br
> result: no message output to monitor, and don`t see e1000 nic in guest
>
> Is is a bug or I test it in a wrong way?
Hi,
You used hot-plug correctly, it doesn't work yet since I am still working on this feature.
The bridge gives us the basics environment for hot-plug, what is missing is ACPI "bsel" mechanism.
Thanks,
Marcel
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property
2016-03-24 15:34 ` Marcel Apfelbaum
@ 2016-03-25 6:28 ` Cao jin
0 siblings, 0 replies; 7+ messages in thread
From: Cao jin @ 2016-03-25 6:28 UTC (permalink / raw)
To: marcel, qemu-devel; +Cc: ehabkost, laine, mst
On 03/24/2016 11:34 PM, Marcel Apfelbaum wrote:
>
> Hi,
>
> You used hot-plug correctly, it doesn't work yet since I am still
> working on this feature.
> The bridge gives us the basics environment for hot-plug, what is missing
> is ACPI "bsel" mechanism.
>
> Thanks,
> Marcel
I see, Thanks for your information:)
--
Yours Sincerely,
Cao jin
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-03-25 6:26 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-03 14:18 [Qemu-devel] [PATCH V4] hw/pxb: add chassis_nr property Marcel Apfelbaum
2016-03-14 15:21 ` Marcel Apfelbaum
2016-03-15 8:00 ` Cao jin
2016-03-15 11:44 ` Marcel Apfelbaum
2016-03-17 10:02 ` Cao jin
2016-03-24 15:34 ` Marcel Apfelbaum
2016-03-25 6:28 ` Cao jin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.