[PATCH v8 0/6] Implement generic ASoC HDMI codec and use it in tda998x

[PATCH v8 0/6] Implement generic ASoC HDMI codec and use it in tda998x

[Jyri Sarha]

The only change to v7: Remove the unused variable from
tda998x_configure_audio().

Not much have changed since v6[1] patch series. I did everything
addressed every comment, mostly by robots :), to previous series and
there was one bug fixed in tda998x side. Unless there is any
significant reaction to this series, I am going to put it to rest for
a while now. I have other things to do.

There is currently two other patch series[2][3] that depend on the
first two (ALSA-) patches of this series. The third ("ASoC:
hdmi-codec: Add audio abort() callback for video side to use") is
currently not used and can be dropped if so decided. The rest depends
on those the first two and adds hdmi-audio support for
Beaglebone-black.

Best regards,
Jyri

[1] "[PATCH v6 0/6] Implement generic ASoC HDMI codec and use it in tda998x"
    http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105524.html
[2] "[PATCH v6 00/10] ASoC: Add mediatek HDMI codec support" by Philipp Zabel 
    http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105509.html
[3] "[RFC v2 0/6] sti: add audio interface to the hdmi driver"
    http://mailman.alsa-project.org/pipermail/alsa-devel/2016-January/103374.html
    and "[PATCH v4 0/6] add IEC958 channel status control helpers"
    http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105502.html
    by Arnaud Pouliquen

Changes since v7
* "drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding"
  - Remove the unused "int ret" variable from tda998x_configure_audio()

Changes since v6
* "ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders"
 - Add "Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>" and
   "Tested-by: Philipp Zabel <p.zabel@pengutronix.de>", no other changes
* "ALSA: pcm: add IEC958 channel status helper for hw_param"
 - Added kernel-doc for snd_pcm_create_iec958_consumer_hw_params()
* "drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding"
 - Use PTR_ERR_OR_ZERO() in tda998x_audio_codec_init()
 - Fix possible uninitialized use of 'size' in tda998x_get_audio_ports()
 - Store audio configuration in tda998x_audio_hw_params() instead of
   tda998x_configure_audio().

Changes since v5
 - Rebased on top of the latest drm-next branch
 - Allow 32 bit samplewidth in snd_pcm_create_iec958_consumer() and
   snd_pcm_create_iec958_consumer_hw_params()
 - Propose new simpler DT binding for tda998x audio
 - Squash tda998x audio DT binding together with hdmi-codec integration

Changes since RFC v4,
 - Rebased on top of the latest drm-next branch
 - Split the hdmi-codec abort functionality into a separate patch for
   better visibility of what it is all about
   - This does not affect the tda998x patches as the abort
     functionality is not used
 - Drop S18_3* formats from I2S_FORMATS and add a comment about formats
   not supported by HDMI

Changes since RFC v3,
 ASoC side:
 - Add "ALSA: pcm: add IEC958 channel status helper for hw_params"
 - Add "tda998x: Improve tda998x_configure_audio() audio related pdata"
 - use snd_pcm_create_iec958_consumer_hw_params() to construct the stream header
 - Remove set_clk() callback from hdmi-codec. It is not needed for now.
 - Refer to stream header in AIF as specified in HDMI standard
 - Set current_stream to NULL only after video side audio_shutdown() has
   been called. Avoid potential race if video side attempts to abort audio
   at the same time.
 - No need to have video side device pointer in the hdmi codec's pdata as
   it is found from dev->parent.
 - Fix hdmi-codec enum: DAI_ID_I2C > DAI_ID_I2S
 - Improve audio_startup API comment
 - Make improved checkpatch happy 
   - BUG_ON > WARN_ON
   - put */ ending the block comment to a separate line

 DRM side:
 - Fix tda998x get_eld() locking
 - Change tda998x audio parameters in pdata to more generic, that can
   be readily used in tda998x_audio_config()
 - Rename and restructure audio port related private data members to
   be more descriptive
 - Require audio configuration trough ASoC hdmi-codec if HDMI audio is
   configured trough DT binding. 

 DTS:
 - Increase McASP fifo usage form 1 to 32

Jyri Sarha (6):
  ALSA: pcm: add IEC958 channel status helper for hw_params
  ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders
  ASoC: hdmi-codec: Add audio abort() callback for video side to use
  drm/i2c: tda998x: Improve tda998x_configure_audio() audio related
    pdata
  drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding
  ARM: dts: am335x-boneblack: Add HDMI audio support

 .../devicetree/bindings/display/bridge/tda998x.txt |  18 +
 arch/arm/boot/dts/am335x-boneblack.dts             |  71 +++-
 drivers/gpu/drm/i2c/Kconfig                        |   1 +
 drivers/gpu/drm/i2c/tda998x_drv.c                  | 275 ++++++++++++--
 include/drm/i2c/tda998x.h                          |  24 +-
 include/dt-bindings/display/tda998x.h              |   7 +
 include/sound/hdmi-codec.h                         | 104 ++++++
 include/sound/pcm_iec958.h                         |   2 +
 sound/core/pcm_iec958.c                            |  65 +++-
 sound/soc/codecs/Kconfig                           |   6 +
 sound/soc/codecs/Makefile                          |   2 +
 sound/soc/codecs/hdmi-codec.c                      | 411 +++++++++++++++++++++
 12 files changed, 914 insertions(+), 72 deletions(-)
 create mode 100644 include/dt-bindings/display/tda998x.h
 create mode 100644 include/sound/hdmi-codec.h
 create mode 100644 sound/soc/codecs/hdmi-codec.c

-- 
1.9.1

[PATCH v8 1/6] ALSA: pcm: add IEC958 channel status helper for hw_params

[Jyri Sarha]

Add IEC958 channel status helper that gets the audio properties from
snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
produce the channel status bits already in audio stream configuration
phase.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 include/sound/pcm_iec958.h |  2 ++
 sound/core/pcm_iec958.c    | 65 ++++++++++++++++++++++++++++++++++------------
 2 files changed, 50 insertions(+), 17 deletions(-)

diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
index 0eed397..36f023a 100644
--- a/include/sound/pcm_iec958.h
+++ b/include/sound/pcm_iec958.h
@@ -6,4 +6,6 @@
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len);
 
+int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					     u8 *cs, size_t len);
 #endif
diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
index 36b2d7a..5e6aed6 100644
--- a/sound/core/pcm_iec958.c
+++ b/sound/core/pcm_iec958.c
@@ -9,30 +9,18 @@
 #include <linux/types.h>
 #include <sound/asoundef.h>
 #include <sound/pcm.h>
+#include <sound/pcm_params.h>
 #include <sound/pcm_iec958.h>
 
-/**
- * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
- * @runtime: pcm runtime structure with ->rate filled in
- * @cs: channel status buffer, at least four bytes
- * @len: length of channel status buffer
- *
- * Create the consumer format channel status data in @cs of maximum size
- * @len corresponding to the parameters of the PCM runtime @runtime.
- *
- * Drivers may wish to tweak the contents of the buffer after creation.
- *
- * Returns: length of buffer, or negative error code if something failed.
- */
-int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
-	size_t len)
+static int create_iec958_consumer(uint rate, uint sample_width,
+				  u8 *cs, size_t len)
 {
 	unsigned int fs, ws;
 
 	if (len < 4)
 		return -EINVAL;
 
-	switch (runtime->rate) {
+	switch (rate) {
 	case 32000:
 		fs = IEC958_AES3_CON_FS_32000;
 		break;
@@ -59,7 +47,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	}
 
 	if (len > 4) {
-		switch (snd_pcm_format_width(runtime->format)) {
+		switch (sample_width) {
 		case 16:
 			ws = IEC958_AES4_CON_WORDLEN_20_16;
 			break;
@@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 			     IEC958_AES4_CON_MAX_WORDLEN_24;
 			break;
 		case 24:
+		case 32: /* Assume 24-bit width for 32-bit samples. */
 			ws = IEC958_AES4_CON_WORDLEN_24_20 |
 			     IEC958_AES4_CON_MAX_WORDLEN_24;
 			break;
@@ -92,4 +81,46 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 
 	return len;
 }
+
+/**
+ * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
+ * @runtime: pcm runtime structure with ->rate filled in
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Create the consumer format channel status data in @cs of maximum size
+ * @len corresponding to the parameters of the PCM runtime @runtime.
+ *
+ * Drivers may wish to tweak the contents of the buffer after creation.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
+	size_t len)
+{
+	return create_iec958_consumer(runtime->rate,
+				      snd_pcm_format_width(runtime->format),
+				      cs, len);
+}
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
+
+/**
+ * snd_pcm_create_iec958_consumer_hw_params - create IEC958 channel status
+ * @hw_params: the hw_params instance for extracting rate and sample format
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Create the consumer format channel status data in @cs of maximum size
+ * @len corresponding to the parameters of the PCM runtime @runtime.
+ *
+ * Drivers may wish to tweak the contents of the buffer after creation.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					     u8 *cs, size_t len)
+{
+	return create_iec958_consumer(params_rate(params), params_width(params),
+				      cs, len);
+}
+EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v8 2/6] ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders

[Jyri Sarha]

The hdmi-codec is a platform device driver to be registered from
drivers of external HDMI encoders with I2S and/or spdif interface. The
driver in turn registers an ASoC codec for the HDMI encoder's audio
functionality.

The structures and definitions in the API header are mostly redundant
copies of similar structures in ASoC headers. This is on purpose to
avoid direct dependencies to ASoC structures in video side driver.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 include/sound/hdmi-codec.h    | 100 +++++++++++
 sound/soc/codecs/Kconfig      |   6 +
 sound/soc/codecs/Makefile     |   2 +
 sound/soc/codecs/hdmi-codec.c | 393 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 501 insertions(+)
 create mode 100644 include/sound/hdmi-codec.h
 create mode 100644 sound/soc/codecs/hdmi-codec.c

diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
new file mode 100644
index 0000000..fc3a481
--- /dev/null
+++ b/include/sound/hdmi-codec.h
@@ -0,0 +1,100 @@
+/*
+ * hdmi-codec.h - HDMI Codec driver API
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Jyri Sarha <jsarha@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __HDMI_CODEC_H__
+#define __HDMI_CODEC_H__
+
+#include <linux/hdmi.h>
+#include <drm/drm_edid.h>
+#include <sound/asoundef.h>
+#include <uapi/sound/asound.h>
+
+/*
+ * Protocol between ASoC cpu-dai and HDMI-encoder
+ */
+struct hdmi_codec_daifmt {
+	enum {
+		HDMI_I2S,
+		HDMI_RIGHT_J,
+		HDMI_LEFT_J,
+		HDMI_DSP_A,
+		HDMI_DSP_B,
+		HDMI_AC97,
+		HDMI_SPDIF,
+	} fmt;
+	int bit_clk_inv:1;
+	int frame_clk_inv:1;
+	int bit_clk_master:1;
+	int frame_clk_master:1;
+};
+
+/*
+ * HDMI audio parameters
+ */
+struct hdmi_codec_params {
+	struct hdmi_audio_infoframe cea;
+	struct snd_aes_iec958 iec;
+	int sample_rate;
+	int sample_width;
+	int channels;
+};
+
+struct hdmi_codec_ops {
+	/*
+	 * Called when ASoC starts an audio stream setup.
+	 * Optional
+	 */
+	int (*audio_startup)(struct device *dev);
+
+	/*
+	 * Configures HDMI-encoder for audio stream.
+	 * Mandatory
+	 */
+	int (*hw_params)(struct device *dev,
+			 struct hdmi_codec_daifmt *fmt,
+			 struct hdmi_codec_params *hparms);
+
+	/*
+	 * Shuts down the audio stream.
+	 * Mandatory
+	 */
+	void (*audio_shutdown)(struct device *dev);
+
+	/*
+	 * Mute/unmute HDMI audio stream.
+	 * Optional
+	 */
+	int (*digital_mute)(struct device *dev, bool enable);
+
+	/*
+	 * Provides EDID-Like-Data from connected HDMI device.
+	 * Optional
+	 */
+	int (*get_eld)(struct device *dev, uint8_t *buf, size_t len);
+};
+
+/* HDMI codec initalization data */
+struct hdmi_codec_pdata {
+	const struct hdmi_codec_ops *ops;
+	uint i2s:1;
+	uint spdif:1;
+	int max_i2s_channels;
+};
+
+#define HDMI_CODEC_DRV_NAME "hdmi-audio-codec"
+
+#endif /* __HDMI_CODEC_H__ */
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 50693c8..62b62fe 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -86,6 +86,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_MC13783 if MFD_MC13XXX
 	select SND_SOC_ML26124 if I2C
 	select SND_SOC_NAU8825 if I2C
+	select SND_SOC_HDMI_CODEC
 	select SND_SOC_PCM1681 if I2C
 	select SND_SOC_PCM179X if SPI_MASTER
 	select SND_SOC_PCM3008
@@ -473,6 +474,11 @@ config SND_SOC_BT_SCO
 config SND_SOC_DMIC
 	tristate
 
+config SND_SOC_HDMI_CODEC
+       tristate
+       select SND_PCM_ELD
+       select SND_PCM_IEC958
+
 config SND_SOC_ES8328
 	tristate "Everest Semi ES8328 CODEC"
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index d44f7d3..5f7b002 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -79,6 +79,7 @@ snd-soc-max9850-objs := max9850.o
 snd-soc-mc13783-objs := mc13783.o
 snd-soc-ml26124-objs := ml26124.o
 snd-soc-nau8825-objs := nau8825.o
+snd-soc-hdmi-codec-objs := hdmi-codec.o
 snd-soc-pcm1681-objs := pcm1681.o
 snd-soc-pcm179x-codec-objs := pcm179x.o
 snd-soc-pcm3008-objs := pcm3008.o
@@ -283,6 +284,7 @@ obj-$(CONFIG_SND_SOC_MAX9850)	+= snd-soc-max9850.o
 obj-$(CONFIG_SND_SOC_MC13783)	+= snd-soc-mc13783.o
 obj-$(CONFIG_SND_SOC_ML26124)	+= snd-soc-ml26124.o
 obj-$(CONFIG_SND_SOC_NAU8825)   += snd-soc-nau8825.o
+obj-$(CONFIG_SND_SOC_HDMI_CODEC)	+= snd-soc-hdmi-codec.o
 obj-$(CONFIG_SND_SOC_PCM1681)	+= snd-soc-pcm1681.o
 obj-$(CONFIG_SND_SOC_PCM179X)	+= snd-soc-pcm179x-codec.o
 obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
new file mode 100644
index 0000000..bc47b9a
--- /dev/null
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -0,0 +1,393 @@
+/*
+ * ALSA SoC codec for HDMI encoder drivers
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Jyri Sarha <jsarha@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
+ * General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/string.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/pcm_drm_eld.h>
+#include <sound/hdmi-codec.h>
+#include <sound/pcm_iec958.h>
+
+#include <drm/drm_crtc.h> /* This is only to get MAX_ELD_BYTES */
+
+struct hdmi_codec_priv {
+	struct hdmi_codec_pdata hcd;
+	struct snd_soc_dai_driver *daidrv;
+	struct hdmi_codec_daifmt daifmt[2];
+	struct mutex current_stream_lock;
+	struct snd_pcm_substream *current_stream;
+	struct snd_pcm_hw_constraint_list ratec;
+	uint8_t eld[MAX_ELD_BYTES];
+};
+
+static const struct snd_soc_dapm_widget hdmi_widgets[] = {
+	SND_SOC_DAPM_OUTPUT("TX"),
+};
+
+static const struct snd_soc_dapm_route hdmi_routes[] = {
+	{ "TX", NULL, "Playback" },
+};
+
+enum {
+	DAI_ID_I2S = 0,
+	DAI_ID_SPDIF,
+};
+
+static int hdmi_codec_new_stream(struct snd_pcm_substream *substream,
+				 struct snd_soc_dai *dai)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	int ret = 0;
+
+	mutex_lock(&hcp->current_stream_lock);
+	if (!hcp->current_stream) {
+		hcp->current_stream = substream;
+	} else if (hcp->current_stream != substream) {
+		dev_err(dai->dev, "Only one simultaneous stream supported!\n");
+		ret = -EINVAL;
+	}
+	mutex_unlock(&hcp->current_stream_lock);
+
+	return ret;
+}
+
+static int hdmi_codec_startup(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	int ret = 0;
+
+	dev_dbg(dai->dev, "%s()\n", __func__);
+
+	ret = hdmi_codec_new_stream(substream, dai);
+	if (ret)
+		return ret;
+
+	if (hcp->hcd.ops->audio_startup) {
+		ret = hcp->hcd.ops->audio_startup(dai->dev->parent);
+		if (ret) {
+			mutex_lock(&hcp->current_stream_lock);
+			hcp->current_stream = NULL;
+			mutex_unlock(&hcp->current_stream_lock);
+			return ret;
+		}
+	}
+
+	if (hcp->hcd.ops->get_eld) {
+		ret = hcp->hcd.ops->get_eld(dai->dev->parent, hcp->eld,
+					    sizeof(hcp->eld));
+
+		if (!ret) {
+			ret = snd_pcm_hw_constraint_eld(substream->runtime,
+							hcp->eld);
+			if (ret)
+				return ret;
+		}
+	}
+	return 0;
+}
+
+static void hdmi_codec_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+
+	dev_dbg(dai->dev, "%s()\n", __func__);
+
+	WARN_ON(hcp->current_stream != substream);
+
+	hcp->hcd.ops->audio_shutdown(dai->dev->parent);
+
+	mutex_lock(&hcp->current_stream_lock);
+	hcp->current_stream = NULL;
+	mutex_unlock(&hcp->current_stream_lock);
+}
+
+static int hdmi_codec_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	struct hdmi_codec_params hp = {
+		.iec = {
+			.status = { 0 },
+			.subcode = { 0 },
+			.pad = 0,
+			.dig_subframe = { 0 },
+		}
+	};
+	int ret;
+
+	dev_dbg(dai->dev, "%s() width %d rate %d channels %d\n", __func__,
+		params_width(params), params_rate(params),
+		params_channels(params));
+
+	ret = snd_pcm_create_iec958_consumer_hw_params(params, hp.iec.status,
+						       sizeof(hp.iec.status));
+	if (ret < 0) {
+		dev_err(dai->dev, "Creating IEC958 channel status failed %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = hdmi_codec_new_stream(substream, dai);
+	if (ret)
+		return ret;
+
+	hdmi_audio_infoframe_init(&hp.cea);
+	hp.cea.channels = params_channels(params);
+	hp.cea.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
+	hp.cea.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
+	hp.cea.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
+
+	hp.sample_width = params_width(params);
+	hp.sample_rate = params_rate(params);
+	hp.channels = params_channels(params);
+
+	return hcp->hcd.ops->hw_params(dai->dev->parent, &hcp->daifmt[dai->id],
+				       &hp);
+}
+
+static int hdmi_codec_set_fmt(struct snd_soc_dai *dai,
+			      unsigned int fmt)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	struct hdmi_codec_daifmt cf = { 0 };
+	int ret = 0;
+
+	dev_dbg(dai->dev, "%s()\n", __func__);
+
+	if (dai->id == DAI_ID_SPDIF) {
+		cf.fmt = HDMI_SPDIF;
+	} else {
+		switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+		case SND_SOC_DAIFMT_CBM_CFM:
+			cf.bit_clk_master = 1;
+			cf.frame_clk_master = 1;
+			break;
+		case SND_SOC_DAIFMT_CBS_CFM:
+			cf.frame_clk_master = 1;
+			break;
+		case SND_SOC_DAIFMT_CBM_CFS:
+			cf.bit_clk_master = 1;
+			break;
+		case SND_SOC_DAIFMT_CBS_CFS:
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			cf.frame_clk_inv = 1;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			cf.bit_clk_inv = 1;
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			cf.frame_clk_inv = 1;
+			cf.bit_clk_inv = 1;
+			break;
+		}
+
+		switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+		case SND_SOC_DAIFMT_I2S:
+			cf.fmt = HDMI_I2S;
+			break;
+		case SND_SOC_DAIFMT_DSP_A:
+			cf.fmt = HDMI_DSP_A;
+			break;
+		case SND_SOC_DAIFMT_DSP_B:
+			cf.fmt = HDMI_DSP_B;
+			break;
+		case SND_SOC_DAIFMT_RIGHT_J:
+			cf.fmt = HDMI_RIGHT_J;
+			break;
+		case SND_SOC_DAIFMT_LEFT_J:
+			cf.fmt = HDMI_LEFT_J;
+			break;
+		case SND_SOC_DAIFMT_AC97:
+			cf.fmt = HDMI_AC97;
+			break;
+		default:
+			dev_err(dai->dev, "Invalid DAI interface format\n");
+			return -EINVAL;
+		}
+	}
+
+	hcp->daifmt[dai->id] = cf;
+
+	return ret;
+}
+
+static int hdmi_codec_digital_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+
+	dev_dbg(dai->dev, "%s()\n", __func__);
+
+	if (hcp->hcd.ops->digital_mute)
+		return hcp->hcd.ops->digital_mute(dai->dev->parent, mute);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops hdmi_dai_ops = {
+	.startup	= hdmi_codec_startup,
+	.shutdown	= hdmi_codec_shutdown,
+	.hw_params	= hdmi_codec_hw_params,
+	.set_fmt	= hdmi_codec_set_fmt,
+	.digital_mute	= hdmi_codec_digital_mute,
+};
+
+
+#define HDMI_RATES	(SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+			 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
+			 SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\
+			 SNDRV_PCM_RATE_192000)
+
+#define SPDIF_FORMATS	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |\
+			 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE |\
+			 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |\
+			 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE)
+
+/*
+ * This list is only for formats allowed on the I2S bus. So there is
+ * some formats listed that are not supported by HDMI interface. For
+ * instance allowing the 32-bit formats enables 24-precision with CPU
+ * DAIs that do not support 24-bit formats. If the extra formats cause
+ * problems, we should add the video side driver an option to disable
+ * them.
+ */
+#define I2S_FORMATS	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |\
+			 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE |\
+			 SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |\
+			 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |\
+			 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE)
+
+static struct snd_soc_dai_driver hdmi_i2s_dai = {
+	.name = "i2s-hifi",
+	.id = DAI_ID_I2S,
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 8,
+		.rates = HDMI_RATES,
+		.formats = I2S_FORMATS,
+		.sig_bits = 24,
+	},
+	.ops = &hdmi_dai_ops,
+};
+
+static const struct snd_soc_dai_driver hdmi_spdif_dai = {
+	.name = "spdif-hifi",
+	.id = DAI_ID_SPDIF,
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = HDMI_RATES,
+		.formats = SPDIF_FORMATS,
+	},
+	.ops = &hdmi_dai_ops,
+};
+
+static struct snd_soc_codec_driver hdmi_codec = {
+	.dapm_widgets = hdmi_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(hdmi_widgets),
+	.dapm_routes = hdmi_routes,
+	.num_dapm_routes = ARRAY_SIZE(hdmi_routes),
+};
+
+static int hdmi_codec_probe(struct platform_device *pdev)
+{
+	struct hdmi_codec_pdata *hcd = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct hdmi_codec_priv *hcp;
+	int dai_count, i = 0;
+	int ret;
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	if (!hcd) {
+		dev_err(dev, "%s: No plalform data\n", __func__);
+		return -EINVAL;
+	}
+
+	dai_count = hcd->i2s + hcd->spdif;
+	if (dai_count < 1 || !hcd->ops || !hcd->ops->hw_params ||
+	    !hcd->ops->audio_shutdown) {
+		dev_err(dev, "%s: Invalid parameters\n", __func__);
+		return -EINVAL;
+	}
+
+	hcp = devm_kzalloc(dev, sizeof(*hcp), GFP_KERNEL);
+	if (!hcp)
+		return -ENOMEM;
+
+	hcp->hcd = *hcd;
+	mutex_init(&hcp->current_stream_lock);
+
+	hcp->daidrv = devm_kzalloc(dev, dai_count * sizeof(*hcp->daidrv),
+				   GFP_KERNEL);
+	if (!hcp->daidrv)
+		return -ENOMEM;
+
+	if (hcd->i2s) {
+		hcp->daidrv[i] = hdmi_i2s_dai;
+		hcp->daidrv[i].playback.channels_max =
+			hcd->max_i2s_channels;
+		i++;
+	}
+
+	if (hcd->spdif)
+		hcp->daidrv[i] = hdmi_spdif_dai;
+
+	ret = snd_soc_register_codec(dev, &hdmi_codec, hcp->daidrv,
+				     dai_count);
+	if (ret) {
+		dev_err(dev, "%s: snd_soc_register_codec() failed (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	dev_set_drvdata(dev, hcp);
+	return 0;
+}
+
+static int hdmi_codec_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_codec(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver hdmi_codec_driver = {
+	.driver = {
+		.name = HDMI_CODEC_DRV_NAME,
+	},
+	.probe = hdmi_codec_probe,
+	.remove = hdmi_codec_remove,
+};
+
+module_platform_driver(hdmi_codec_driver);
+
+MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>");
+MODULE_DESCRIPTION("HDMI Audio Codec Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" HDMI_CODEC_DRV_NAME);
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v8 3/6] ASoC: hdmi-codec: Add audio abort() callback for video side to use

[Jyri Sarha]

Add audio abort() callback, that is provided at audio stream start,
for video side. This is for video side to use in case there is a
pressing need to tear down the audio playback for some reason.

Signed-off-by: Jyri Sarha <jsarha-l0cyMroinI0@public.gmane.org>
---
 include/sound/hdmi-codec.h    |  8 ++++++--
 sound/soc/codecs/hdmi-codec.c | 20 +++++++++++++++++++-
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
index fc3a481..15fe70f 100644
--- a/include/sound/hdmi-codec.h
+++ b/include/sound/hdmi-codec.h
@@ -55,10 +55,14 @@ struct hdmi_codec_params {
 
 struct hdmi_codec_ops {
 	/*
-	 * Called when ASoC starts an audio stream setup.
+	 * Called when ASoC starts an audio stream setup. The call
+	 * provides an audio abort callback for stoping an ongoing
+	 * stream from video side driver if the HDMI audio becomes
+	 * unavailable.
 	 * Optional
 	 */
-	int (*audio_startup)(struct device *dev);
+	int (*audio_startup)(struct device *dev,
+			     void (*abort_cb)(struct device *dev));
 
 	/*
 	 * Configures HDMI-encoder for audio stream.
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index bc47b9a..cc08097 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -47,6 +47,23 @@ enum {
 	DAI_ID_SPDIF,
 };
 
+static void hdmi_codec_abort(struct device *dev)
+{
+	struct hdmi_codec_priv *hcp = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "%s()\n", __func__);
+
+	mutex_lock(&hcp->current_stream_lock);
+	if (hcp->current_stream && hcp->current_stream->runtime &&
+	    snd_pcm_running(hcp->current_stream)) {
+		dev_info(dev, "HDMI audio playback aborted\n");
+		snd_pcm_stream_lock_irq(hcp->current_stream);
+		snd_pcm_stop(hcp->current_stream, SNDRV_PCM_STATE_DISCONNECTED);
+		snd_pcm_stream_unlock_irq(hcp->current_stream);
+	}
+	mutex_unlock(&hcp->current_stream_lock);
+}
+
 static int hdmi_codec_new_stream(struct snd_pcm_substream *substream,
 				 struct snd_soc_dai *dai)
 {
@@ -78,7 +95,8 @@ static int hdmi_codec_startup(struct snd_pcm_substream *substream,
 		return ret;
 
 	if (hcp->hcd.ops->audio_startup) {
-		ret = hcp->hcd.ops->audio_startup(dai->dev->parent);
+		ret = hcp->hcd.ops->audio_startup(dai->dev->parent,
+						  hdmi_codec_abort);
 		if (ret) {
 			mutex_lock(&hcp->current_stream_lock);
 			hcp->current_stream = NULL;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v8 4/6] drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata

[Jyri Sarha]

Define struct tda998x_audio_params in include/drm/i2c/tda998x.h and
use it in pdata and for tda998x_configure_audio() parameters. Also
updates tda998x_write_aif() to take struct hdmi_audio_infoframe *
directly as a parameter.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/i2c/tda998x_drv.c | 77 ++++++++++++++++++++-------------------
 include/drm/i2c/tda998x.h         | 24 +++++++-----
 2 files changed, 53 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index f4315bc..f97b748 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -41,7 +41,7 @@ struct tda998x_priv {
 	u8 vip_cntrl_0;
 	u8 vip_cntrl_1;
 	u8 vip_cntrl_2;
-	struct tda998x_encoder_params params;
+	struct tda998x_audio_params audio_params;
 
 	wait_queue_head_t wq_edid;
 	volatile int wq_edid_wait;
@@ -666,26 +666,16 @@ tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr,
 	reg_set(priv, REG_DIP_IF_FLAGS, bit);
 }
 
-static void
-tda998x_write_aif(struct tda998x_priv *priv, struct tda998x_encoder_params *p)
+static int tda998x_write_aif(struct tda998x_priv *priv,
+			     struct hdmi_audio_infoframe *cea)
 {
 	union hdmi_infoframe frame;
 
-	hdmi_audio_infoframe_init(&frame.audio);
-
-	frame.audio.channels = p->audio_frame[1] & 0x07;
-	frame.audio.channel_allocation = p->audio_frame[4];
-	frame.audio.level_shift_value = (p->audio_frame[5] & 0x78) >> 3;
-	frame.audio.downmix_inhibit = (p->audio_frame[5] & 0x80) >> 7;
-
-	/*
-	 * L-PCM and IEC61937 compressed audio shall always set sample
-	 * frequency to "refer to stream".  For others, see the HDMI
-	 * specification.
-	 */
-	frame.audio.sample_frequency = (p->audio_frame[2] & 0x1c) >> 2;
+	frame.audio = *cea;
 
 	tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, &frame);
+
+	return 0;
 }
 
 static void
@@ -710,20 +700,21 @@ static void tda998x_audio_mute(struct tda998x_priv *priv, bool on)
 	}
 }
 
-static void
+static int
 tda998x_configure_audio(struct tda998x_priv *priv,
-		struct drm_display_mode *mode, struct tda998x_encoder_params *p)
+			struct tda998x_audio_params *params,
+			unsigned mode_clock)
 {
 	u8 buf[6], clksel_aip, clksel_fs, cts_n, adiv;
 	u32 n;
 
 	/* Enable audio ports */
-	reg_write(priv, REG_ENA_AP, p->audio_cfg);
-	reg_write(priv, REG_ENA_ACLK, p->audio_clk_cfg);
+	reg_write(priv, REG_ENA_AP, params->config);
 
 	/* Set audio input source */
-	switch (p->audio_format) {
+	switch (params->format) {
 	case AFMT_SPDIF:
+		reg_write(priv, REG_ENA_ACLK, 0);
 		reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF);
 		clksel_aip = AIP_CLKSEL_AIP_SPDIF;
 		clksel_fs = AIP_CLKSEL_FS_FS64SPDIF;
@@ -731,15 +722,29 @@ tda998x_configure_audio(struct tda998x_priv *priv,
 		break;
 
 	case AFMT_I2S:
+		reg_write(priv, REG_ENA_ACLK, 1);
 		reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S);
 		clksel_aip = AIP_CLKSEL_AIP_I2S;
 		clksel_fs = AIP_CLKSEL_FS_ACLK;
-		cts_n = CTS_N_M(3) | CTS_N_K(3);
+		switch (params->sample_width) {
+		case 16:
+			cts_n = CTS_N_M(3) | CTS_N_K(1);
+			break;
+		case 18:
+		case 20:
+		case 24:
+			cts_n = CTS_N_M(3) | CTS_N_K(2);
+			break;
+		default:
+		case 32:
+			cts_n = CTS_N_M(3) | CTS_N_K(3);
+			break;
+		}
 		break;
 
 	default:
 		BUG();
-		return;
+		return -EINVAL;
 	}
 
 	reg_write(priv, REG_AIP_CLKSEL, clksel_aip);
@@ -755,11 +760,11 @@ tda998x_configure_audio(struct tda998x_priv *priv,
 	 * assume 100MHz requires larger divider.
 	 */
 	adiv = AUDIO_DIV_SERCLK_8;
-	if (mode->clock > 100000)
+	if (mode_clock > 100000)
 		adiv++;			/* AUDIO_DIV_SERCLK_16 */
 
 	/* S/PDIF asks for a larger divider */
-	if (p->audio_format == AFMT_SPDIF)
+	if (params->format == AFMT_SPDIF)
 		adiv++;			/* AUDIO_DIV_SERCLK_16 or _32 */
 
 	reg_write(priv, REG_AUDIO_DIV, adiv);
@@ -768,7 +773,7 @@ tda998x_configure_audio(struct tda998x_priv *priv,
 	 * This is the approximate value of N, which happens to be
 	 * the recommended values for non-coherent clocks.
 	 */
-	n = 128 * p->audio_sample_rate / 1000;
+	n = 128 * params->sample_rate / 1000;
 
 	/* Write the CTS and N values */
 	buf[0] = 0x44;
@@ -787,19 +792,13 @@ tda998x_configure_audio(struct tda998x_priv *priv,
 	reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
 
 	/* Write the channel status */
-	buf[0] = IEC958_AES0_CON_NOT_COPYRIGHT;
-	buf[1] = 0x00;
-	buf[2] = IEC958_AES3_CON_FS_NOTID;
-	buf[3] = IEC958_AES4_CON_ORIGFS_NOTID |
-			IEC958_AES4_CON_MAX_WORDLEN_24;
-	reg_write_range(priv, REG_CH_STAT_B(0), buf, 4);
+	reg_write_range(priv, REG_CH_STAT_B(0), params->status, 4);
 
 	tda998x_audio_mute(priv, true);
 	msleep(20);
 	tda998x_audio_mute(priv, false);
 
-	/* Write the audio information packet */
-	tda998x_write_aif(priv, p);
+	return tda998x_write_aif(priv, &params->cea);
 }
 
 /* DRM encoder functions */
@@ -820,7 +819,7 @@ static void tda998x_encoder_set_config(struct tda998x_priv *priv,
 			    VIP_CNTRL_2_SWAP_F(p->swap_f) |
 			    (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
 
-	priv->params = *p;
+	priv->audio_params = p->audio;
 }
 
 static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
@@ -1057,9 +1056,11 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
 
 		tda998x_write_avi(priv, adjusted_mode);
 
-		if (priv->params.audio_cfg)
-			tda998x_configure_audio(priv, adjusted_mode,
-						&priv->params);
+		if (priv->audio_params.format != AFMT_UNUSED) {
+			tda998x_configure_audio(priv,
+						&priv->audio_params,
+						adjusted_mode->clock);
+		}
 	}
 }
 
diff --git a/include/drm/i2c/tda998x.h b/include/drm/i2c/tda998x.h
index 3e419d9..24be7aa 100644
--- a/include/drm/i2c/tda998x.h
+++ b/include/drm/i2c/tda998x.h
@@ -1,6 +1,19 @@
 #ifndef __DRM_I2C_TDA998X_H__
 #define __DRM_I2C_TDA998X_H__
 
+#define AFMT_UNUSED	0
+#define AFMT_SPDIF	1
+#define AFMT_I2S	2
+
+struct tda998x_audio_params {
+	u8 config;
+	u8 format;
+	unsigned sample_width;
+	unsigned sample_rate;
+	struct hdmi_audio_infoframe cea;
+	u8 status[4];
+};
+
 struct tda998x_encoder_params {
 	u8 swap_b:3;
 	u8 mirr_b:1;
@@ -15,16 +28,7 @@ struct tda998x_encoder_params {
 	u8 swap_e:3;
 	u8 mirr_e:1;
 
-	u8 audio_cfg;
-	u8 audio_clk_cfg;
-	u8 audio_frame[6];
-
-	enum {
-		AFMT_SPDIF,
-		AFMT_I2S
-	} audio_format;
-
-	unsigned audio_sample_rate;
+	struct tda998x_audio_params audio;
 };
 
 #endif
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v8 5/6] drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding

[Jyri Sarha]

Register ASoC HDMI codec for audio functionality and adds device tree
binding for audio configuration.

With the registered HDMI codec the tda998x node can be used like a
regular codec node in ASoC card configurations. HDMI audio info-frame
and audio stream header is generated by the ASoC HDMI codec. The codec
also applies constraints for available sample-rates based on Edid Like
Data from the display. The device tree binding document has been
updated [1].

Part of this patch has been inspired by Jean Francoise's "drm/i2c: tda998x:
Add support of a DT graph of ports"-patch [2]. There may still be some
identical lines left from the original patch and some of the ideas
have come from there.

[1] Documentation/devicetree/bindings/display/bridge/tda998x.txt
[2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/095255.html

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 .../devicetree/bindings/display/bridge/tda998x.txt |  18 ++
 drivers/gpu/drm/i2c/Kconfig                        |   1 +
 drivers/gpu/drm/i2c/tda998x_drv.c                  | 198 ++++++++++++++++++++-
 include/drm/i2c/tda998x.h                          |   4 +-
 include/dt-bindings/display/tda998x.h              |   7 +
 5 files changed, 223 insertions(+), 5 deletions(-)
 create mode 100644 include/dt-bindings/display/tda998x.h

diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
index e178e6b..24cc246 100644
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
@@ -21,8 +21,19 @@ Optional properties:
   - video-ports: 24 bits value which defines how the video controller
 	output is wired to the TDA998x input - default: <0x230145>
 
+  - audio-ports: array of 8-bit values, 2 values per one DAI[1].
+	The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2].
+	The second value defines the tda998x AP_ENA reg content when the DAI
+	in question is used. The implementation allows one or two DAIs. If two
+	DAIs are defined, they must be of different type.
+
+[1] Documentation/sound/alsa/soc/DAI.txt
+[2] include/dt-bindings/display/tda998x.h
+
 Example:
 
+#include <dt-bindings/display/tda998x.h>
+
 	tda998x: hdmi-encoder {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
@@ -30,4 +41,11 @@ Example:
 		interrupts = <27 2>;		/* falling edge */
 		pinctrl-0 = <&pmx_camera>;
 		pinctrl-names = "default";
+		video-ports = <0x230145>;
+
+		#sound-dai-cells = <2>;
+			     /*	DAI-format	AP_ENA reg value */
+		audio-ports = <	TDA998x_SPDIF	0x04
+				TDA998x_I2S	0x03>;
+
 	};
diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index 22c7ed6..088f278 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -28,6 +28,7 @@ config DRM_I2C_SIL164
 config DRM_I2C_NXP_TDA998X
 	tristate "NXP Semiconductors TDA998X HDMI encoder"
 	default m if DRM_TILCDC
+	select SND_SOC_HDMI_CODEC if SND_SOC
 	help
 	  Support for NXP Semiconductors TDA998X HDMI encoders.
 
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index f97b748..9d37493 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <sound/asoundef.h>
+#include <sound/hdmi-codec.h>
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
@@ -30,6 +31,11 @@
 
 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
 
+struct tda998x_audio_port {
+	u8 format;		/* AFMT_xxx */
+	u8 config;		/* AP value */
+};
+
 struct tda998x_priv {
 	struct i2c_client *cec;
 	struct i2c_client *hdmi;
@@ -43,6 +49,8 @@ struct tda998x_priv {
 	u8 vip_cntrl_2;
 	struct tda998x_audio_params audio_params;
 
+	struct platform_device *audio_pdev;
+
 	wait_queue_head_t wq_edid;
 	volatile int wq_edid_wait;
 
@@ -53,6 +61,8 @@ struct tda998x_priv {
 
 	struct drm_encoder encoder;
 	struct drm_connector connector;
+
+	struct tda998x_audio_port audio_port[2];
 };
 
 #define conn_to_tda998x_priv(x) \
@@ -743,7 +753,7 @@ tda998x_configure_audio(struct tda998x_priv *priv,
 		break;
 
 	default:
-		BUG();
+		dev_err(&priv->hdmi->dev, "Unsupported I2S format\n");
 		return -EINVAL;
 	}
 
@@ -1160,6 +1170,8 @@ static int tda998x_connector_get_modes(struct drm_connector *connector)
 	drm_mode_connector_update_edid_property(connector, edid);
 	n = drm_add_edid_modes(connector, edid);
 	priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
+	drm_edid_to_eld(connector, edid);
+
 	kfree(edid);
 
 	return n;
@@ -1181,6 +1193,9 @@ static void tda998x_destroy(struct tda998x_priv *priv)
 	cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
 	reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
 
+	if (priv->audio_pdev)
+		platform_device_unregister(priv->audio_pdev);
+
 	if (priv->hdmi->irq)
 		free_irq(priv->hdmi->irq, priv);
 
@@ -1190,8 +1205,179 @@ static void tda998x_destroy(struct tda998x_priv *priv)
 	i2c_unregister_device(priv->cec);
 }
 
+static int tda998x_audio_hw_params(struct device *dev,
+				   struct hdmi_codec_daifmt *daifmt,
+				   struct hdmi_codec_params *params)
+{
+	struct tda998x_priv *priv = dev_get_drvdata(dev);
+	int i, ret;
+	struct tda998x_audio_params audio = {
+		.sample_width = params->sample_width,
+		.sample_rate = params->sample_rate,
+		.cea = params->cea,
+	};
+
+	if (!priv->encoder.crtc)
+		return -ENODEV;
+
+	memcpy(audio.status, params->iec.status,
+	       min(sizeof(audio.status), sizeof(params->iec.status)));
+
+	switch (daifmt->fmt) {
+	case HDMI_I2S:
+		if (daifmt->bit_clk_inv || daifmt->frame_clk_inv ||
+		    daifmt->bit_clk_master || daifmt->frame_clk_master) {
+			dev_err(dev, "%s: Bad flags %d %d %d %d\n", __func__,
+				daifmt->bit_clk_inv, daifmt->frame_clk_inv,
+				daifmt->bit_clk_master,
+				daifmt->frame_clk_master);
+			return -EINVAL;
+		}
+		for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++)
+			if (priv->audio_port[i].format == AFMT_I2S)
+				audio.config = priv->audio_port[i].config;
+		audio.format = AFMT_I2S;
+		break;
+	case HDMI_SPDIF:
+		for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++)
+			if (priv->audio_port[i].format == AFMT_SPDIF)
+				audio.config = priv->audio_port[i].config;
+		audio.format = AFMT_SPDIF;
+		break;
+	default:
+		dev_err(dev, "%s: Invalid format %d\n", __func__, daifmt->fmt);
+		return -EINVAL;
+	}
+
+	if (audio.config == 0) {
+		dev_err(dev, "%s: No audio configutation found\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = tda998x_configure_audio(priv,
+				      &audio,
+				      priv->encoder.crtc->hwmode.clock);
+
+	if (ret == 0)
+		priv->audio_params = audio;
+
+	return ret;
+}
+
+static void tda998x_audio_shutdown(struct device *dev)
+{
+	struct tda998x_priv *priv = dev_get_drvdata(dev);
+
+	reg_write(priv, REG_ENA_AP, 0);
+
+	priv->audio_params.format = AFMT_UNUSED;
+}
+
+int tda998x_audio_digital_mute(struct device *dev, bool enable)
+{
+	struct tda998x_priv *priv = dev_get_drvdata(dev);
+
+	tda998x_audio_mute(priv, enable);
+
+	return 0;
+}
+
+static int tda998x_audio_get_eld(struct device *dev, uint8_t *buf, size_t len)
+{
+	struct tda998x_priv *priv = dev_get_drvdata(dev);
+	struct drm_mode_config *config = &priv->encoder.dev->mode_config;
+	struct drm_connector *connector;
+	int ret = -ENODEV;
+
+	mutex_lock(&config->mutex);
+	list_for_each_entry(connector, &config->connector_list, head) {
+		if (&priv->encoder == connector->encoder) {
+			memcpy(buf, connector->eld,
+			       min(sizeof(connector->eld), len));
+			ret = 0;
+		}
+	}
+	mutex_unlock(&config->mutex);
+
+	return ret;
+}
+
+static const struct hdmi_codec_ops audio_codec_ops = {
+	.hw_params = tda998x_audio_hw_params,
+	.audio_shutdown = tda998x_audio_shutdown,
+	.digital_mute = tda998x_audio_digital_mute,
+	.get_eld = tda998x_audio_get_eld,
+};
+
+static int tda998x_audio_codec_init(struct tda998x_priv *priv,
+				    struct device *dev)
+{
+	struct hdmi_codec_pdata codec_data = {
+		.ops = &audio_codec_ops,
+		.max_i2s_channels = 2,
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++) {
+		if (priv->audio_port[i].format == AFMT_I2S &&
+		    priv->audio_port[i].config != 0)
+			codec_data.i2s = 1;
+		if (priv->audio_port[i].format == AFMT_SPDIF &&
+		    priv->audio_port[i].config != 0)
+			codec_data.spdif = 1;
+	}
+
+	priv->audio_pdev = platform_device_register_data(
+		dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO,
+		&codec_data, sizeof(codec_data));
+
+	return PTR_ERR_OR_ZERO(priv->audio_pdev);
+}
+
 /* I2C driver functions */
 
+static int tda998x_get_audio_ports(struct tda998x_priv *priv,
+				   struct device_node *np)
+{
+	const u32 *port_data;
+	u32 size;
+	int i;
+
+	port_data = of_get_property(np, "audio-ports", &size);
+	if (!port_data)
+		return 0;
+
+	size /= sizeof(u32);
+	if (size > 2 * ARRAY_SIZE(priv->audio_port) || size % 2 != 0) {
+		dev_err(&priv->hdmi->dev,
+			"Bad number of elements in audio-ports dt-property\n");
+		return -EINVAL;
+	}
+
+	size /= 2;
+
+	for (i = 0; i < size; i++) {
+		u8 afmt = be32_to_cpup(&port_data[2*i]);
+		u8 ena_ap = be32_to_cpup(&port_data[2*i+1]);
+
+		if (afmt != AFMT_SPDIF && afmt != AFMT_I2S) {
+			dev_err(&priv->hdmi->dev,
+				"Bad audio format %u\n", afmt);
+			return -EINVAL;
+		}
+
+		priv->audio_port[i].format = afmt;
+		priv->audio_port[i].config = ena_ap;
+	}
+
+	if (priv->audio_port[0].format == priv->audio_port[1].format) {
+		dev_err(&priv->hdmi->dev,
+			"There can only be on I2S port and one SPDIF port\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 {
 	struct device_node *np = client->dev.of_node;
@@ -1305,7 +1491,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 	if (!np)
 		return 0;		/* non-DT */
 
-	/* get the optional video properties */
+	/* get the device tree parameters */
 	ret = of_property_read_u32(np, "video-ports", &video);
 	if (ret == 0) {
 		priv->vip_cntrl_0 = video >> 16;
@@ -1313,8 +1499,14 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 		priv->vip_cntrl_2 = video;
 	}
 
-	return 0;
+	ret = tda998x_get_audio_ports(priv, np);
+	if (ret)
+		goto fail;
 
+	if (priv->audio_port[0].format != AFMT_UNUSED)
+		tda998x_audio_codec_init(priv, &client->dev);
+
+	return 0;
 fail:
 	/* if encoder_init fails, the encoder slave is never registered,
 	 * so cleanup here:
diff --git a/include/drm/i2c/tda998x.h b/include/drm/i2c/tda998x.h
index 24be7aa..b575332 100644
--- a/include/drm/i2c/tda998x.h
+++ b/include/drm/i2c/tda998x.h
@@ -1,9 +1,9 @@
 #ifndef __DRM_I2C_TDA998X_H__
 #define __DRM_I2C_TDA998X_H__
 
+#include <dt-bindings/display/tda998x.h>
+
 #define AFMT_UNUSED	0
-#define AFMT_SPDIF	1
-#define AFMT_I2S	2
 
 struct tda998x_audio_params {
 	u8 config;
diff --git a/include/dt-bindings/display/tda998x.h b/include/dt-bindings/display/tda998x.h
new file mode 100644
index 0000000..38ef741
--- /dev/null
+++ b/include/dt-bindings/display/tda998x.h
@@ -0,0 +1,7 @@
+#ifndef _DT_BINDINGS_TDA998X_H
+#define _DT_BINDINGS_TDA998X_H
+
+#define AFMT_SPDIF	1
+#define AFMT_I2S	2
+
+#endif /*_DT_BINDINGS_TDA998X_H */
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v8 6/6] ARM: dts: am335x-boneblack: Add HDMI audio support

[Jyri Sarha]

Add HDMI audio support. Adds mcasp0_pins, clk_mcasp0_fixed,
clk_mcasp0, mcasp0, sound node, and updates the tda19988 node to
follow the new binding.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 arch/arm/boot/dts/am335x-boneblack.dts | 71 ++++++++++++++++++++++++++++++++--
 1 file changed, 67 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 55c0e95..2bae4d1 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -9,6 +9,7 @@
 
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
+#include <dt-bindings/display/tda998x.h>
 
 / {
 	model = "TI AM335x BeagleBone Black";
@@ -64,6 +65,16 @@
 			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
 		>;
 	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
 };
 
 &lcdc {
@@ -76,16 +87,22 @@
 };
 
 &i2c0 {
-	tda19988 {
+	tda19988: tda19988 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
+
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
 
-		port {
-			hdmi_0: endpoint@0 {
-				remote-endpoint = <&lcdc_0>;
+		#sound-dai-cells = <0>;
+		audio-ports = <	AFMT_I2S	0x03>;
+
+		ports {
+			port@0 {
+				hdmi_0: endpoint@0 {
+					remote-endpoint = <&lcdc_0>;
+				};
 			};
 		};
 	};
@@ -94,3 +111,49 @@
 &rtc {
 	system-power-controller;
 };
+
+&mcasp0	{
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk_mcasp0_fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk_mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+};
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v8 6/6] ARM: dts: am335x-boneblack: Add HDMI audio support

[Jean-Francois Moine]

On Thu, 17 Mar 2016 14:22:34 +0200
Jyri Sarha <jsarha-l0cyMroinI0@public.gmane.org> wrote:

> @@ -76,16 +87,22 @@
>  };
>  
>  &i2c0 {
> -	tda19988 {
> +	tda19988: tda19988 {
>  		compatible = "nxp,tda998x";
>  		reg = <0x70>;
> +
>  		pinctrl-names = "default", "off";
>  		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
>  		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
>  
> -		port {
> -			hdmi_0: endpoint@0 {
> -				remote-endpoint = <&lcdc_0>;
> +		#sound-dai-cells = <0>;
> +		audio-ports = <	AFMT_I2S	0x03>;
> +
> +		ports {
> +			port@0 {
> +				hdmi_0: endpoint@0 {
> +					remote-endpoint = <&lcdc_0>;
> +				};
>  			};
>  		};
>  	};

Why did you add a 'ports' container? As there is only one port,
it is useless.

Also, you don't need '@0' in the 'port' and 'endpoint'.
If you want to keep it, you must add 'reg = 0;'s.

-- 
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v8 6/6] ARM: dts: am335x-boneblack: Add HDMI audio support

[Jyri Sarha]

On 03/19/16 08:39, Jean-Francois Moine wrote:
> On Thu, 17 Mar 2016 14:22:34 +0200
> Jyri Sarha <jsarha@ti.com> wrote:
> 
>> @@ -76,16 +87,22 @@
>>  };
>>  
>>  &i2c0 {
>> -	tda19988 {
>> +	tda19988: tda19988 {
>>  		compatible = "nxp,tda998x";
>>  		reg = <0x70>;
>> +
>>  		pinctrl-names = "default", "off";
>>  		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
>>  		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
>>  
>> -		port {
>> -			hdmi_0: endpoint@0 {
>> -				remote-endpoint = <&lcdc_0>;
>> +		#sound-dai-cells = <0>;
>> +		audio-ports = <	AFMT_I2S	0x03>;
>> +
>> +		ports {
>> +			port@0 {
>> +				hdmi_0: endpoint@0 {
>> +					remote-endpoint = <&lcdc_0>;
>> +				};
>>  			};
>>  		};
>>  	};
> 
> Why did you add a 'ports' container? As there is only one port,
> it is useless.
> 

Well, I just left it there. The node parsing code should handle the
container if it follows graph[1] binding. Putting the ports container
node is equally correct as leaving it out, but surely I can leave it out
next time (when ever it comes).

> Also, you don't need '@0' in the 'port' and 'endpoint'.
> If you want to keep it, you must add 'reg = 0;'s.
> 

I am still not sure about the "must" part. From all that I have read[2]
the unit number should be the same as reg property if possible. But then
again if the reg property consists of multiple addresses, how do you put
them in the unit address? To me no unit address at all is an analogue
situation and I see no point in adding an artificial reg property if I
need multiple nodes by same name. This actually happens quite often with
sound-nodes when I have multiple audio devices in the same system.

But still, there is no need for the unit address here and it should be
removed. I'll do that next time.

Best regard,
Jyri

[1] Documentation/devicetree/bindings/graph.txt
[2] http://devicetree.org/Device_Tree_Usage

Re: [PATCH v8 1/6] ALSA: pcm: add IEC958 channel status helper for hw_params

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 288 bytes --]

On Thu, Mar 17, 2016 at 02:22:29PM +0200, Jyri Sarha wrote:
> Add IEC958 channel status helper that gets the audio properties from
> snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
> produce the channel status bits already in audio stream configuration
> phase.

Takashi?

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v8 1/6] ALSA: pcm: add IEC958 channel status helper for hw_params

[Takashi Iwai]

On Thu, 17 Mar 2016 13:22:29 +0100,
Jyri Sarha wrote:
> 
> Add IEC958 channel status helper that gets the audio properties from
> snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
> produce the channel status bits already in audio stream configuration
> phase.
> 
> Signed-off-by: Jyri Sarha <jsarha-l0cyMroinI0@public.gmane.org>

This patch looks almost good to me, but...

> @@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  			     IEC958_AES4_CON_MAX_WORDLEN_24;
>  			break;
>  		case 24:
> +		case 32: /* Assume 24-bit width for 32-bit samples. */
>  			ws = IEC958_AES4_CON_WORDLEN_24_20 |
>  			     IEC958_AES4_CON_MAX_WORDLEN_24;
>  			break;

... this change is silently slipped in.  It should be mentioned in the
changelog, or split to another patch, as this is basically an
orthogonal change.


thanks,

Takashi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v8 1/6] ALSA: pcm: add IEC958 channel status helper for hw_params

[Russell King - ARM Linux]

On Tue, Mar 29, 2016 at 10:54:08AM +0200, Takashi Iwai wrote:
> On Thu, 17 Mar 2016 13:22:29 +0100,
> Jyri Sarha wrote:
> > 
> > Add IEC958 channel status helper that gets the audio properties from
> > snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
> > produce the channel status bits already in audio stream configuration
> > phase.
> > 
> > Signed-off-by: Jyri Sarha <jsarha@ti.com>
> 
> This patch looks almost good to me, but...
> 
> > @@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
> >  			     IEC958_AES4_CON_MAX_WORDLEN_24;
> >  			break;
> >  		case 24:
> > +		case 32: /* Assume 24-bit width for 32-bit samples. */
> >  			ws = IEC958_AES4_CON_WORDLEN_24_20 |
> >  			     IEC958_AES4_CON_MAX_WORDLEN_24;
> >  			break;
> 
> ... this change is silently slipped in.  It should be mentioned in the
> changelog, or split to another patch, as this is basically an
> orthogonal change.

Does it even make sense - AES doesn't have support for 32-bit samples,
it can only ever truncate them down to 24-bit.

-- 
RMK's Patch system: http://www.arm.linux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v8 1/6] ALSA: pcm: add IEC958 channel status helper for hw_params

[Takashi Iwai]

On Tue, 29 Mar 2016 19:23:12 +0200,
Russell King - ARM Linux wrote:
> 
> On Tue, Mar 29, 2016 at 10:54:08AM +0200, Takashi Iwai wrote:
> > On Thu, 17 Mar 2016 13:22:29 +0100,
> > Jyri Sarha wrote:
> > > 
> > > Add IEC958 channel status helper that gets the audio properties from
> > > snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
> > > produce the channel status bits already in audio stream configuration
> > > phase.
> > > 
> > > Signed-off-by: Jyri Sarha <jsarha@ti.com>
> > 
> > This patch looks almost good to me, but...
> > 
> > > @@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
> > >  			     IEC958_AES4_CON_MAX_WORDLEN_24;
> > >  			break;
> > >  		case 24:
> > > +		case 32: /* Assume 24-bit width for 32-bit samples. */
> > >  			ws = IEC958_AES4_CON_WORDLEN_24_20 |
> > >  			     IEC958_AES4_CON_MAX_WORDLEN_24;
> > >  			break;
> > 
> > ... this change is silently slipped in.  It should be mentioned in the
> > changelog, or split to another patch, as this is basically an
> > orthogonal change.
> 
> Does it even make sense - AES doesn't have support for 32-bit samples,
> it can only ever truncate them down to 24-bit.

Well, using SNDRV_PCM_FORMAT_S32_* for 24 bit samples is seen often on
real devices, mostly on PCI ones.  So, adding the value 32 check there
itself is valid, I suppose.  It's rather due to a bad design in the
current API.

The actual bits should be specified hw_params.msbits field, instead.
But, not all drivers set this properly, unfortunately.


Takashi
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v8 1/6] ALSA: pcm: add IEC958 channel status helper for hw_params

[Jyri Sarha]

On 03/30/16 09:21, Takashi Iwai wrote:
> On Tue, 29 Mar 2016 19:23:12 +0200,
> Russell King - ARM Linux wrote:
>>
>> On Tue, Mar 29, 2016 at 10:54:08AM +0200, Takashi Iwai wrote:
>>> On Thu, 17 Mar 2016 13:22:29 +0100,
>>> Jyri Sarha wrote:
>>>>
>>>> Add IEC958 channel status helper that gets the audio properties from
>>>> snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
>>>> produce the channel status bits already in audio stream configuration
>>>> phase.
>>>>
>>>> Signed-off-by: Jyri Sarha <jsarha-l0cyMroinI0@public.gmane.org>
>>>
>>> This patch looks almost good to me, but...
>>>
>>>> @@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>>>>  			     IEC958_AES4_CON_MAX_WORDLEN_24;
>>>>  			break;
>>>>  		case 24:
>>>> +		case 32: /* Assume 24-bit width for 32-bit samples. */
>>>>  			ws = IEC958_AES4_CON_WORDLEN_24_20 |
>>>>  			     IEC958_AES4_CON_MAX_WORDLEN_24;
>>>>  			break;
>>>
>>> ... this change is silently slipped in.  It should be mentioned in the
>>> changelog, or split to another patch, as this is basically an
>>> orthogonal change.
>>
>> Does it even make sense - AES doesn't have support for 32-bit samples,
>> it can only ever truncate them down to 24-bit.
> 
> Well, using SNDRV_PCM_FORMAT_S32_* for 24 bit samples is seen often on
> real devices, mostly on PCI ones.  So, adding the value 32 check there
> itself is valid, I suppose.  It's rather due to a bad design in the
> current API.
> 

That also happens on SoC environment i2s interfaces for various reasons.
For instance if the i2s bit-clock for sample-rate * 24 * 2 is not
available, but sample-rate * 32 * 2 is.

> The actual bits should be specified hw_params.msbits field, instead.
> But, not all drivers set this properly, unfortunately.
> 

How about allowing the 32-bit format only if hw_params.msbits is set to
24 bits?

I can set the hw_params.msbits to 24 in ASoC hdmi-codec's hw_params,
can't I? I could also fake the whole hw_params struct that I pass to
snd_pcm_create_iec958_consumer_hw_params(), but would that make sense?

What ever the approach, I can of course split the 32 bit support into a
separate subsequent patch, but for instance Beaglebone-black 48kHz
24-bit HDMI audio needs 32 bit format on i2s bus because of the
available i2s bit-clocks.

Best regards,
Jyri
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v8 1/6] ALSA: pcm: add IEC958 channel status helper for hw_params

[Takashi Iwai]

On Wed, 30 Mar 2016 10:25:52 +0200,
Jyri Sarha wrote:
> 
> On 03/30/16 09:21, Takashi Iwai wrote:
> > On Tue, 29 Mar 2016 19:23:12 +0200,
> > Russell King - ARM Linux wrote:
> >>
> >> On Tue, Mar 29, 2016 at 10:54:08AM +0200, Takashi Iwai wrote:
> >>> On Thu, 17 Mar 2016 13:22:29 +0100,
> >>> Jyri Sarha wrote:
> >>>>
> >>>> Add IEC958 channel status helper that gets the audio properties from
> >>>> snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
> >>>> produce the channel status bits already in audio stream configuration
> >>>> phase.
> >>>>
> >>>> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> >>>
> >>> This patch looks almost good to me, but...
> >>>
> >>>> @@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
> >>>>  			     IEC958_AES4_CON_MAX_WORDLEN_24;
> >>>>  			break;
> >>>>  		case 24:
> >>>> +		case 32: /* Assume 24-bit width for 32-bit samples. */
> >>>>  			ws = IEC958_AES4_CON_WORDLEN_24_20 |
> >>>>  			     IEC958_AES4_CON_MAX_WORDLEN_24;
> >>>>  			break;
> >>>
> >>> ... this change is silently slipped in.  It should be mentioned in the
> >>> changelog, or split to another patch, as this is basically an
> >>> orthogonal change.
> >>
> >> Does it even make sense - AES doesn't have support for 32-bit samples,
> >> it can only ever truncate them down to 24-bit.
> > 
> > Well, using SNDRV_PCM_FORMAT_S32_* for 24 bit samples is seen often on
> > real devices, mostly on PCI ones.  So, adding the value 32 check there
> > itself is valid, I suppose.  It's rather due to a bad design in the
> > current API.
> > 
> 
> That also happens on SoC environment i2s interfaces for various reasons.
> For instance if the i2s bit-clock for sample-rate * 24 * 2 is not
> available, but sample-rate * 32 * 2 is.
> 
> > The actual bits should be specified hw_params.msbits field, instead.
> > But, not all drivers set this properly, unfortunately.
> > 
> 
> How about allowing the 32-bit format only if hw_params.msbits is set to
> 24 bits?

I'm thinking whether msbits is updated automatically upon hw_params
refinement, or it's just used as the constraint.  If msbits is always
set, we can refer this value reliably.

But, I guess just accepting the format width 32 would be good enough
as a start.  The driver is responsible to fill in the right data
format, and the helper doesn't care much about that.

Once when we figure out that msbits can be used reliably, we can
switch to it later.

> I can set the hw_params.msbits to 24 in ASoC hdmi-codec's hw_params,
> can't I? I could also fake the whole hw_params struct that I pass to
> snd_pcm_create_iec958_consumer_hw_params(), but would that make sense?

The setup of msbits is anyway good no matter whether we add the check
in iec958 layer.

> What ever the approach, I can of course split the 32 bit support into a
> separate subsequent patch, but for instance Beaglebone-black 48kHz
> 24-bit HDMI audio needs 32 bit format on i2s bus because of the
> available i2s bit-clocks.

Yes, splitting the 32bit support is more appropriate than hiding in a
patch to add the new helper.


Takashi
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel