[PATCH 1/5] drm: Add new DCS commands in the enum list

[PATCH 1/5] drm: Add new DCS commands in the enum list

[Jani Nikula]

From: Deepak M <m.deepak@intel.com>

Adding new DCS commands which are specified in the
DCS 1.3 spec related to CABC.

v2: Sorted the Macro`s by value (Andrzej)

v3 by Jani: sort all of enum, refer to MIPI DCS 1.3

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 include/video/mipi_display.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
index ddcc8ca7316b..19aa65a35546 100644
--- a/include/video/mipi_display.h
+++ b/include/video/mipi_display.h
@@ -115,6 +115,14 @@ enum {
 	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
 	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
 	MIPI_DCS_GET_SCANLINE		= 0x45,
+	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52,		/* MIPI DCS 1.3 */
+	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54,		/* MIPI DCS 1.3 */
+	MIPI_DCS_WRITE_POWER_SAVE	= 0x55,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_POWER_SAVE		= 0x56,		/* MIPI DCS 1.3 */
+	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
 	MIPI_DCS_READ_DDB_START		= 0xA1,
 	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
 };
-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 2/5] drm/i915: Parsing the PWM cntrl and CABC ON/OFF fields in VBT

[Jani Nikula]

From: Deepak M <m.deepak@intel.com>

For dual link panel scenarios there are new fields added in the
VBT which indicate on which port the PWM cntrl and CABC ON/OFF
commands needs to be sent.

v2: Moving the comment to intel_dsi.h(Jani)

v3: Renaming the field names (Jani)

v4 by Jani: make this patch only about VBT

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_bios.c | 10 ++++++++++
 drivers/gpu/drm/i915/intel_bios.h |  8 +++++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 9c406b0f4173..6985519921b4 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -746,6 +746,16 @@ parse_mipi_config(struct drm_i915_private *dev_priv,
 		return;
 	}
 
+	/*
+	 * These fields are introduced from the VBT version 197 onwards,
+	 * so making sure that these bits are set zero in the previous
+	 * versions.
+	 */
+	if (dev_priv->vbt.dsi.config->dual_link && bdb->version < 197) {
+		dev_priv->vbt.dsi.config->dl_dcs_cabc_ports = 0;
+		dev_priv->vbt.dsi.config->dl_dcs_backlight_ports = 0;
+	}
+
 	/* We have mandatory mipi config blocks. Initialize as generic panel */
 	dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
 }
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index ab0ea315eddb..149c3226e895 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -113,7 +113,13 @@ struct mipi_config {
 	u16 dual_link:2;
 	u16 lane_cnt:2;
 	u16 pixel_overlap:3;
-	u16 rsvd3:9;
+	u16 rgb_flip:1;
+#define DL_DCS_PORT_A			0x00
+#define DL_DCS_PORT_C			0x01
+#define DL_DCS_PORT_A_AND_C		0x02
+	u16 dl_dcs_cabc_ports:2;
+	u16 dl_dcs_backlight_ports:2;
+	u16 rsvd3:4;
 
 	u16 rsvd4;
 
-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/5] drm/i915: Parsing the PWM cntrl and CABC ON/OFF fields in VBT

[Jani Nikula]

On Wed, 30 Mar 2016, Jani Nikula <jani.nikula@intel.com> wrote:
> From: Deepak M <m.deepak@intel.com>
>
> For dual link panel scenarios there are new fields added in the
> VBT which indicate on which port the PWM cntrl and CABC ON/OFF
> commands needs to be sent.
>
> v2: Moving the comment to intel_dsi.h(Jani)
>
> v3: Renaming the field names (Jani)
>
> v4 by Jani: make this patch only about VBT
>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>
> Signed-off-by: Deepak M <m.deepak@intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Pushed to drm-intel-next-queued.

BR,
Jani.


> ---
>  drivers/gpu/drm/i915/intel_bios.c | 10 ++++++++++
>  drivers/gpu/drm/i915/intel_bios.h |  8 +++++++-
>  2 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 9c406b0f4173..6985519921b4 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -746,6 +746,16 @@ parse_mipi_config(struct drm_i915_private *dev_priv,
>  		return;
>  	}
>  
> +	/*
> +	 * These fields are introduced from the VBT version 197 onwards,
> +	 * so making sure that these bits are set zero in the previous
> +	 * versions.
> +	 */
> +	if (dev_priv->vbt.dsi.config->dual_link && bdb->version < 197) {
> +		dev_priv->vbt.dsi.config->dl_dcs_cabc_ports = 0;
> +		dev_priv->vbt.dsi.config->dl_dcs_backlight_ports = 0;
> +	}
> +
>  	/* We have mandatory mipi config blocks. Initialize as generic panel */
>  	dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
>  }
> diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
> index ab0ea315eddb..149c3226e895 100644
> --- a/drivers/gpu/drm/i915/intel_bios.h
> +++ b/drivers/gpu/drm/i915/intel_bios.h
> @@ -113,7 +113,13 @@ struct mipi_config {
>  	u16 dual_link:2;
>  	u16 lane_cnt:2;
>  	u16 pixel_overlap:3;
> -	u16 rsvd3:9;
> +	u16 rgb_flip:1;
> +#define DL_DCS_PORT_A			0x00
> +#define DL_DCS_PORT_C			0x01
> +#define DL_DCS_PORT_A_AND_C		0x02
> +	u16 dl_dcs_cabc_ports:2;
> +	u16 dl_dcs_backlight_ports:2;
> +	u16 rsvd3:4;
>  
>  	u16 rsvd4;

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 3/5] drm/i915: Parse LFP brightness control field in VBT

[Jani Nikula]

From: Deepak M <m.deepak@intel.com>

These fields in VBT indicates the PWM source which
is used and also the controller number.

v2 by Jani: check for out of bounds access, some renames, change default
type, etc.

v3 by Jani: s/INTEL_BACKLIGHT_CABC/INTEL_BACKLIGHT_DSI_DCS/

Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h       | 1 +
 drivers/gpu/drm/i915/intel_bios.c     | 9 +++++++++
 drivers/gpu/drm/i915/intel_bios.h     | 8 ++++++++
 drivers/gpu/drm/i915/intel_vbt_defs.h | 6 ++++++
 4 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f6d71590bd7b..49c033c78f35 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1472,6 +1472,7 @@ struct intel_vbt_data {
 		bool present;
 		bool active_low_pwm;
 		u8 min_brightness;	/* min_brightness/255 of max */
+		enum intel_backlight_type type;
 	} backlight;
 
 	/* MIPI DSI */
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 6985519921b4..2f639820aded 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -304,6 +304,15 @@ parse_lfp_backlight(struct drm_i915_private *dev_priv,
 		return;
 	}
 
+	dev_priv->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI;
+	if (bdb->version >= 191 &&
+	    get_blocksize(backlight_data) >= sizeof(*backlight_data)) {
+		const struct bdb_lfp_backlight_control_method *method;
+
+		method = &backlight_data->backlight_control[panel_type];
+		dev_priv->vbt.backlight.type = method->type;
+	}
+
 	dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
 	dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm;
 	dev_priv->vbt.backlight.min_brightness = entry->min_brightness;
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 149c3226e895..8405b5a367d7 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -30,6 +30,14 @@
 #ifndef _INTEL_BIOS_H_
 #define _INTEL_BIOS_H_
 
+enum intel_backlight_type {
+	INTEL_BACKLIGHT_PMIC,
+	INTEL_BACKLIGHT_LPSS,
+	INTEL_BACKLIGHT_DISPLAY_DDI,
+	INTEL_BACKLIGHT_DSI_DCS,
+	INTEL_BACKLIGHT_PANEL_DRIVER_INTERFACE,
+};
+
 struct edp_power_seq {
 	u16 t1_t3;
 	u16 t8;
diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h
index 749dceab7c02..2191076c3ff6 100644
--- a/drivers/gpu/drm/i915/intel_vbt_defs.h
+++ b/drivers/gpu/drm/i915/intel_vbt_defs.h
@@ -440,10 +440,16 @@ struct bdb_lfp_backlight_data_entry {
 	u8 obsolete3;
 } __packed;
 
+struct bdb_lfp_backlight_control_method {
+	u8 type:4;
+	u8 controller:4;
+} __packed;
+
 struct bdb_lfp_backlight_data {
 	u8 entry_size;
 	struct bdb_lfp_backlight_data_entry data[16];
 	u8 level[16];
+	struct bdb_lfp_backlight_control_method backlight_control[16];
 } __packed;
 
 struct aimdb_header {
-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 4/5] drm/i915: Add DCS control for Panel PWM

[Jani Nikula]

From: Deepak M <m.deepak@intel.com>

If the source of the backlight PWM is from the
panel then the PWM can be controlled by DCS
command, this patch adds the support to
enable/disbale panel PWM, control backlight level
etc...

v2: Moving the CABC bkl functions to new file.(Jani)

v3: Rebase

v4: Rebase

v5: Use mipi_dsi_dcs_write() instead of mipi_dsi_dcs_write_buffer() (Jani)
    Move DCS macro`s to include/video/mipi_display.h (Jani)

v6: Rename the file to intel_dsi_panel_pwm.c
    Removing the CABC operations

v7 by Jani: renames, rebases, etc.

v8 by Jani: s/INTEL_BACKLIGHT_CABC/INTEL_BACKLIGHT_DSI_DCS/

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/Makefile                  |   1 +
 drivers/gpu/drm/i915/intel_drv.h               |   2 +
 drivers/gpu/drm/i915/intel_dsi.c               |  19 ++-
 drivers/gpu/drm/i915/intel_dsi.h               |   3 +
 drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c | 157 +++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_panel.c             |   4 +
 6 files changed, 184 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 7ffb51b0cbc2..3f6a3cfa6524 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -83,6 +83,7 @@ i915-y += dvo_ch7017.o \
 	  intel_dp_mst.o \
 	  intel_dp.o \
 	  intel_dsi.o \
+	  intel_dsi_dcs_backlight.o \
 	  intel_dsi_panel_vbt.o \
 	  intel_dsi_pll.o \
 	  intel_dvo.o \
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index c87b4503435d..17593d069819 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1325,6 +1325,8 @@ void intel_dp_mst_encoder_cleanup(struct intel_digital_port *intel_dig_port);
 /* intel_dsi.c */
 void intel_dsi_init(struct drm_device *dev);
 
+/* intel_dsi_dcs_backlight.c */
+int intel_dsi_dcs_backlight_init_funcs(struct intel_connector *intel_connector);
 
 /* intel_dvo.c */
 void intel_dvo_init(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 0de74e1b7ab3..9326e9dcbe50 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1220,10 +1220,25 @@ void intel_dsi_init(struct drm_device *dev)
 	else
 		intel_encoder->crtc_mask = BIT(PIPE_B);
 
-	if (dev_priv->vbt.dsi.config->dual_link)
+	if (dev_priv->vbt.dsi.config->dual_link) {
 		intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C);
-	else
+
+		switch (dev_priv->vbt.dsi.config->dl_dcs_backlight_ports) {
+		case DL_DCS_PORT_A:
+			intel_dsi->dcs_backlight_ports = BIT(PORT_A);
+			break;
+		case DL_DCS_PORT_C:
+			intel_dsi->dcs_backlight_ports = BIT(PORT_C);
+			break;
+		default:
+		case DL_DCS_PORT_A_AND_C:
+			intel_dsi->dcs_backlight_ports = BIT(PORT_A) | BIT(PORT_C);
+			break;
+		}
+	} else {
 		intel_dsi->ports = BIT(port);
+		intel_dsi->dcs_backlight_ports = BIT(port);
+	}
 
 	/* Create a DSI host (and a device) for each port. */
 	for_each_dsi_port(port, intel_dsi->ports) {
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index ec58ead9ccd1..efb07f45316f 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -78,6 +78,9 @@ struct intel_dsi {
 
 	u8 escape_clk_div;
 	u8 dual_link;
+
+	u16 dcs_backlight_ports;
+
 	u8 pixel_overlap;
 	u32 port_bits;
 	u32 bw_timer;
diff --git a/drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c b/drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c
new file mode 100644
index 000000000000..bcc10c105c21
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c
@@ -0,0 +1,157 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Deepak M <m.deepak at intel.com>
+ */
+
+#include "intel_drv.h"
+#include "intel_dsi.h"
+#include "i915_drv.h"
+#include <video/mipi_display.h>
+#include <drm/drm_mipi_dsi.h>
+
+#define CONTROL_DISPLAY_BCTRL		(1 << 5)
+#define CONTROL_DISPLAY_DD		(1 << 3)
+#define CONTROL_DISPLAY_BL		(1 << 2)
+
+#define PANEL_PWM_MAX_VALUE		0xFF
+
+static u32 dcs_get_backlight(struct intel_connector *connector)
+{
+	struct intel_encoder *encoder = connector->encoder;
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct mipi_dsi_device *dsi_device;
+	u8 data;
+	enum port port;
+
+	/* FIXME: Need to take care of 16 bit brightness level */
+	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
+		dsi_device = intel_dsi->dsi_hosts[port]->device;
+		mipi_dsi_dcs_read(dsi_device, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
+				  &data, sizeof(data));
+		break;
+	}
+
+	return data;
+}
+
+static void dcs_set_backlight(struct intel_connector *connector, u32 level)
+{
+	struct intel_encoder *encoder = connector->encoder;
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct mipi_dsi_device *dsi_device;
+	u8 data = level;
+	enum port port;
+
+	/* FIXME: Need to take care of 16 bit brightness level */
+	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
+		dsi_device = intel_dsi->dsi_hosts[port]->device;
+		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+				   &data, sizeof(data));
+	}
+}
+
+static void dcs_disable_backlight(struct intel_connector *connector)
+{
+	struct intel_encoder *encoder = connector->encoder;
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct mipi_dsi_device *dsi_device;
+	enum port port;
+
+	dcs_set_backlight(connector, 0);
+
+	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
+		u8 ctrl = 0;
+
+		dsi_device = intel_dsi->dsi_hosts[port]->device;
+
+		mipi_dsi_dcs_read(dsi_device, MIPI_DCS_GET_CONTROL_DISPLAY,
+				  &ctrl, sizeof(ctrl));
+
+		ctrl &= ~CONTROL_DISPLAY_BL;
+		ctrl &= ~CONTROL_DISPLAY_DD;
+		ctrl &= ~CONTROL_DISPLAY_BCTRL;
+
+		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+				   &ctrl, sizeof(ctrl));
+	}
+}
+
+static void dcs_enable_backlight(struct intel_connector *connector)
+{
+	struct intel_encoder *encoder = connector->encoder;
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct intel_panel *panel = &connector->panel;
+	struct mipi_dsi_device *dsi_device;
+	enum port port;
+
+	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
+		u8 ctrl = 0;
+
+		dsi_device = intel_dsi->dsi_hosts[port]->device;
+
+		mipi_dsi_dcs_read(dsi_device, MIPI_DCS_GET_CONTROL_DISPLAY,
+				  &ctrl, sizeof(ctrl));
+
+		ctrl |= CONTROL_DISPLAY_BL;
+		ctrl |= CONTROL_DISPLAY_DD;
+		ctrl |= CONTROL_DISPLAY_BCTRL;
+
+		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+				   &ctrl, sizeof(ctrl));
+	}
+
+	dcs_set_backlight(connector, panel->backlight.level);
+}
+
+static int dcs_setup_backlight(struct intel_connector *connector,
+			       enum pipe unused)
+{
+	struct intel_panel *panel = &connector->panel;
+
+	panel->backlight.max = PANEL_PWM_MAX_VALUE;
+	panel->backlight.level = PANEL_PWM_MAX_VALUE;
+
+	return 0;
+}
+
+int intel_dsi_dcs_backlight_init_funcs(struct intel_connector *intel_connector)
+{
+	struct drm_device *dev = intel_connector->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *encoder = intel_connector->encoder;
+	struct intel_panel *panel = &intel_connector->panel;
+
+	if (dev_priv->vbt.backlight.type != INTEL_BACKLIGHT_DSI_DCS)
+		return -ENODEV;
+
+	if (WARN_ON(encoder->type != INTEL_OUTPUT_DSI))
+		return -EINVAL;
+
+	panel->backlight.setup = dcs_setup_backlight;
+	panel->backlight.enable = dcs_enable_backlight;
+	panel->backlight.disable = dcs_disable_backlight;
+	panel->backlight.set = dcs_set_backlight;
+	panel->backlight.get = dcs_get_backlight;
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 8c8996fcbaf5..f0533b273611 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1718,6 +1718,10 @@ intel_panel_init_backlight_funcs(struct intel_panel *panel)
 		container_of(panel, struct intel_connector, panel);
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
 
+	if (connector->base.connector_type == DRM_MODE_CONNECTOR_DSI &&
+	    intel_dsi_dcs_backlight_init_funcs(connector) == 0)
+		return;
+
 	if (IS_BROXTON(dev_priv)) {
 		panel->backlight.setup = bxt_setup_backlight;
 		panel->backlight.enable = bxt_enable_backlight;
-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 5/5] CABC support for Panel PWM backlight control

[Jani Nikula]

From: Deepak M <m.deepak@intel.com>

In CABC (Content Adaptive Brightness Control) content grey level
scale can be increased while simultaneously decreasing
brightness of the backlight to achieve same perceived brightness.

The CABC is not standardized and panel vendors are free to follow
their implementation. The CABC implementaion here assumes that the
panels use standard SW register for control.

CABC is supported only when the PWM source for backlight is
from the panel.

v2 by Jani: rebase, renames, check cabc support earlier, etc.

Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_dsi.c               | 17 +++++++++++++++++
 drivers/gpu/drm/i915/intel_dsi.h               |  1 +
 drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c | 22 ++++++++++++++++++++++
 3 files changed, 40 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 9326e9dcbe50..6982f0b7dd2d 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1235,11 +1235,28 @@ void intel_dsi_init(struct drm_device *dev)
 			intel_dsi->dcs_backlight_ports = BIT(PORT_A) | BIT(PORT_C);
 			break;
 		}
+
+		switch (dev_priv->vbt.dsi.config->dl_dcs_cabc_ports) {
+		case DL_DCS_PORT_A:
+			intel_dsi->dcs_cabc_ports = BIT(PORT_A);
+			break;
+		case DL_DCS_PORT_C:
+			intel_dsi->dcs_cabc_ports = BIT(PORT_C);
+			break;
+		default:
+		case DL_DCS_PORT_A_AND_C:
+			intel_dsi->dcs_cabc_ports = BIT(PORT_A) | BIT(PORT_C);
+			break;
+		}
 	} else {
 		intel_dsi->ports = BIT(port);
 		intel_dsi->dcs_backlight_ports = BIT(port);
+		intel_dsi->dcs_cabc_ports = BIT(port);
 	}
 
+	if (!dev_priv->vbt.dsi.config->cabc_supported)
+		intel_dsi->dcs_cabc_ports = 0;
+
 	/* Create a DSI host (and a device) for each port. */
 	for_each_dsi_port(port, intel_dsi->ports) {
 		struct intel_dsi_host *host;
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index efb07f45316f..6d84de30f289 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -80,6 +80,7 @@ struct intel_dsi {
 	u8 dual_link;
 
 	u16 dcs_backlight_ports;
+	u16 dcs_cabc_ports;
 
 	u8 pixel_overlap;
 	u32 port_bits;
diff --git a/drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c b/drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c
index bcc10c105c21..9ca74e84c857 100644
--- a/drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c
+++ b/drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c
@@ -33,6 +33,12 @@
 #define CONTROL_DISPLAY_DD		(1 << 3)
 #define CONTROL_DISPLAY_BL		(1 << 2)
 
+#define POWER_SAVE_OFF			(0 << 0)
+#define POWER_SAVE_LOW			(1 << 0)
+#define POWER_SAVE_MEDIUM		(2 << 0)
+#define POWER_SAVE_HIGH			(3 << 0)
+#define POWER_SAVE_OUTDOOR_MODE		(4 << 0)
+
 #define PANEL_PWM_MAX_VALUE		0xFF
 
 static u32 dcs_get_backlight(struct intel_connector *connector)
@@ -79,6 +85,14 @@ static void dcs_disable_backlight(struct intel_connector *connector)
 
 	dcs_set_backlight(connector, 0);
 
+	for_each_dsi_port(port, intel_dsi->dcs_cabc_ports) {
+		u8 cabc = POWER_SAVE_OFF;
+
+		dsi_device = intel_dsi->dsi_hosts[port]->device;
+		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_WRITE_POWER_SAVE,
+				   &cabc, sizeof(cabc));
+	}
+
 	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
 		u8 ctrl = 0;
 
@@ -120,6 +134,14 @@ static void dcs_enable_backlight(struct intel_connector *connector)
 				   &ctrl, sizeof(ctrl));
 	}
 
+	for_each_dsi_port(port, intel_dsi->dcs_cabc_ports) {
+		u8 cabc = POWER_SAVE_MEDIUM;
+
+		dsi_device = intel_dsi->dsi_hosts[port]->device;
+		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_WRITE_POWER_SAVE,
+				   &cabc, sizeof(cabc));
+	}
+
 	dcs_set_backlight(connector, panel->backlight.level);
 }
 
-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 1/5] drm: Add new DCS commands in the enum list

[Andrzej Hajda]

On 03/30/2016 04:03 PM, Jani Nikula wrote:
> From: Deepak M <m.deepak@intel.com>
>
> Adding new DCS commands which are specified in the
> DCS 1.3 spec related to CABC.
>
> v2: Sorted the Macro`s by value (Andrzej)
>
> v3 by Jani: sort all of enum, refer to MIPI DCS 1.3
>
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: <dri-devel@lists.freedesktop.org>
> Suggested-by: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Deepak M <m.deepak@intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>

DCS 1.3 introduces also:
get_error_count_on_DSI 05h
get_image_checksum_ct 15h
get_image_checksum_rgb 14h
read_PPS_continue a9h
read_PPS_start A2h

It would be good to add them, but as the patch
says it adds only CABC related commands so no big deal.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Regards
Andrzej

> ---
>  include/video/mipi_display.h | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
> index ddcc8ca7316b..19aa65a35546 100644
> --- a/include/video/mipi_display.h
> +++ b/include/video/mipi_display.h
> @@ -115,6 +115,14 @@ enum {
>  	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
>  	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
>  	MIPI_DCS_GET_SCANLINE		= 0x45,
> +	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_WRITE_POWER_SAVE	= 0x55,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_GET_POWER_SAVE		= 0x56,		/* MIPI DCS 1.3 */
> +	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
> +	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
>  	MIPI_DCS_READ_DDB_START		= 0xA1,
>  	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
>  };

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 1/5] drm: Add new DCS commands in the enum list

[Daniel Vetter]

On Thu, Mar 31, 2016 at 07:54:18AM +0200, Andrzej Hajda wrote:
> On 03/30/2016 04:03 PM, Jani Nikula wrote:
> > From: Deepak M <m.deepak@intel.com>
> >
> > Adding new DCS commands which are specified in the
> > DCS 1.3 spec related to CABC.
> >
> > v2: Sorted the Macro`s by value (Andrzej)
> >
> > v3 by Jani: sort all of enum, refer to MIPI DCS 1.3
> >
> > Cc: Andrzej Hajda <a.hajda@samsung.com>
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: David Airlie <airlied@linux.ie>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: Daniel Vetter <daniel.vetter@intel.com>
> > Cc: <dri-devel@lists.freedesktop.org>
> > Suggested-by: Jani Nikula <jani.nikula@intel.com>
> > Signed-off-by: Deepak M <m.deepak@intel.com>
> > Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> 
> DCS 1.3 introduces also:
> get_error_count_on_DSI 05h
> get_image_checksum_ct 15h
> get_image_checksum_rgb 14h
> read_PPS_continue a9h
> read_PPS_start A2h
> 
> It would be good to add them, but as the patch
> says it adds only CABC related commands so no big deal.
> 
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Applied to drm-misc, thanks.
-Daniel

> 
> Regards
> Andrzej
> 
> > ---
> >  include/video/mipi_display.h | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
> > index ddcc8ca7316b..19aa65a35546 100644
> > --- a/include/video/mipi_display.h
> > +++ b/include/video/mipi_display.h
> > @@ -115,6 +115,14 @@ enum {
> >  	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
> >  	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
> >  	MIPI_DCS_GET_SCANLINE		= 0x45,
> > +	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
> > +	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52,		/* MIPI DCS 1.3 */
> > +	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53,		/* MIPI DCS 1.3 */
> > +	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54,		/* MIPI DCS 1.3 */
> > +	MIPI_DCS_WRITE_POWER_SAVE	= 0x55,		/* MIPI DCS 1.3 */
> > +	MIPI_DCS_GET_POWER_SAVE		= 0x56,		/* MIPI DCS 1.3 */
> > +	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
> > +	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
> >  	MIPI_DCS_READ_DDB_START		= 0xA1,
> >  	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
> >  };
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 0/5] drm/i915: dsi dcs & cabc backlight control

[Jani Nikula]

This is my review of [1].

BR,
Jani.

[1] https://patchwork.freedesktop.org/series/4993/

Deepak M (5):
  drm: Add new DCS commands in the enum list
  drm/i915: Parsing the PWM cntrl and CABC ON/OFF fields in VBT
  drm/i915: Parse LFP brightness control field in VBT
  drm/i915: Add DCS control for Panel PWM
  CABC support for Panel PWM backlight control

 drivers/gpu/drm/i915/Makefile                  |   1 +
 drivers/gpu/drm/i915/i915_drv.h                |   1 +
 drivers/gpu/drm/i915/intel_bios.c              |  19 +++
 drivers/gpu/drm/i915/intel_bios.h              |  16 ++-
 drivers/gpu/drm/i915/intel_drv.h               |   2 +
 drivers/gpu/drm/i915/intel_dsi.c               |  36 ++++-
 drivers/gpu/drm/i915/intel_dsi.h               |   4 +
 drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c | 179 +++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_panel.c             |   4 +
 drivers/gpu/drm/i915/intel_vbt_defs.h          |   6 +
 include/video/mipi_display.h                   |   8 ++
 11 files changed, 273 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_dsi_dcs_backlight.c

-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 1/5] drm: Add new DCS commands in the enum list

[Jani Nikula]

From: Deepak M <m.deepak@intel.com>

Adding new DCS commands which are specified in the
DCS 1.3 spec related to CABC.

v2: Sorted the Macro`s by value (Andrzej)

v3 by Jani: sort all of enum, refer to MIPI DCS 1.3

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 include/video/mipi_display.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
index ddcc8ca7316b..19aa65a35546 100644
--- a/include/video/mipi_display.h
+++ b/include/video/mipi_display.h
@@ -115,6 +115,14 @@ enum {
 	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
 	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
 	MIPI_DCS_GET_SCANLINE		= 0x45,
+	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52,		/* MIPI DCS 1.3 */
+	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54,		/* MIPI DCS 1.3 */
+	MIPI_DCS_WRITE_POWER_SAVE	= 0x55,		/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_POWER_SAVE		= 0x56,		/* MIPI DCS 1.3 */
+	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
+	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
 	MIPI_DCS_READ_DDB_START		= 0xA1,
 	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
 };
-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 1/5] drm: Add new DCS commands in the enum list

[Deepak M]

Adding new DCS commands which are specified in the
DCS 1.3 spec related to CABC.

v2: Sorted the Macro`s by value (Andrzej)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
---
 include/video/mipi_display.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
index ddcc8ca..6831c84 100644
--- a/include/video/mipi_display.h
+++ b/include/video/mipi_display.h
@@ -117,6 +117,14 @@ enum {
 	MIPI_DCS_GET_SCANLINE		= 0x45,
 	MIPI_DCS_READ_DDB_START		= 0xA1,
 	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51, /*Spec 1.3*/
+	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52, /*Spec 1.3*/
+	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53, /*Spec 1.3*/
+	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54, /*Spec 1.3*/
+	MIPI_DCS_WRITE_POWER_SAVE	= 0x55, /*Spec 1.3*/
+	MIPI_DCS_GET_POWER_SAVE		= 0x56, /*Spec 1.3*/
+	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E, /*Spec 1.3*/
+	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F, /*Spec 1.3*/
 };
 
 /* MIPI DCS pixel formats */
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 1/5] drm: Add new DCS commands in the enum list

[Deepak M]

Adding new DCS commands which are specified in the
DCS 1.3 spec related to CABC.

v2: Sorted the Macro`s by value (Andrzej)

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
---
 include/video/mipi_display.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
index ddcc8ca..6831c84 100644
--- a/include/video/mipi_display.h
+++ b/include/video/mipi_display.h
@@ -117,6 +117,14 @@ enum {
 	MIPI_DCS_GET_SCANLINE		= 0x45,
 	MIPI_DCS_READ_DDB_START		= 0xA1,
 	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51, /*Spec 1.3*/
+	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52, /*Spec 1.3*/
+	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53, /*Spec 1.3*/
+	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54, /*Spec 1.3*/
+	MIPI_DCS_WRITE_POWER_SAVE	= 0x55, /*Spec 1.3*/
+	MIPI_DCS_GET_POWER_SAVE		= 0x56, /*Spec 1.3*/
+	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E, /*Spec 1.3*/
+	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F, /*Spec 1.3*/
 };
 
 /* MIPI DCS pixel formats */
-- 
1.9.1

[PATCH 1/5] drm: Add new DCS commands in the enum list

[Deepak M]

Adding new DCS commands which are specified in the
DCS 1.3 spec related to CABC.

v2: Sorted the Macro`s by value (Andrzej)

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
---
 include/video/mipi_display.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
index ddcc8ca..6831c84 100644
--- a/include/video/mipi_display.h
+++ b/include/video/mipi_display.h
@@ -117,6 +117,14 @@ enum {
 	MIPI_DCS_GET_SCANLINE		= 0x45,
 	MIPI_DCS_READ_DDB_START		= 0xA1,
 	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51, /*Spec 1.3*/
+	MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52, /*Spec 1.3*/
+	MIPI_DCS_WRITE_CONTROL_DISPLAY  = 0x53, /*Spec 1.3*/
+	MIPI_DCS_GET_CONTROL_DISPLAY	= 0x54, /*Spec 1.3*/
+	MIPI_DCS_WRITE_POWER_SAVE	= 0x55, /*Spec 1.3*/
+	MIPI_DCS_GET_POWER_SAVE		= 0x56, /*Spec 1.3*/
+	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E, /*Spec 1.3*/
+	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F, /*Spec 1.3*/
 };
 
 /* MIPI DCS pixel formats */
-- 
1.9.1