* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-30 7:25 ` Henry Chen 0 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-03-30 7:25 UTC (permalink / raw) To: Lee Jones Cc: Matthias Brugger, John Crispin, Sascha Hauer, Flora Fu, linux-kernel, linux-arm-kernel, linux-mediatek, Henry Chen Some sub driver like RTC module need irq domain from parent to create irq mapping when driver initialize. so move mt6397_irq_init() before mfd_add_devices(). Signed-off-by: Henry Chen <henryc.chen@mediatek.com> --- This patch fixed the below warning based on "Linux kernel v4.6-rc1" WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 irq_create_mapping+0xc4/0xd0 --- drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c index 8e8d932..a879223 100644 --- a/drivers/mfd/mt6397-core.c +++ b/drivers/mfd/mt6397-core.c @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) goto fail_irq; } + pmic->irq = platform_get_irq(pdev, 0); + switch (id & 0xff) { case MT6323_CID_CODE: - pmic->int_con[0] = MT6323_INT_CON0; - pmic->int_con[1] = MT6323_INT_CON1; - pmic->int_status[0] = MT6323_INT_STATUS0; - pmic->int_status[1] = MT6323_INT_STATUS1; + if (pmic->irq > 0) { + pmic->int_con[0] = MT6323_INT_CON0; + pmic->int_con[1] = MT6323_INT_CON1; + pmic->int_status[0] = MT6323_INT_STATUS0; + pmic->int_status[1] = MT6323_INT_STATUS1; + ret = mt6397_irq_init(pmic); + if (ret) + return ret; + } + ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); break; case MT6397_CID_CODE: case MT6391_CID_CODE: - pmic->int_con[0] = MT6397_INT_CON0; - pmic->int_con[1] = MT6397_INT_CON1; - pmic->int_status[0] = MT6397_INT_STATUS0; - pmic->int_status[1] = MT6397_INT_STATUS1; + if (pmic->irq > 0) { + pmic->int_con[0] = MT6397_INT_CON0; + pmic->int_con[1] = MT6397_INT_CON1; + pmic->int_status[0] = MT6397_INT_STATUS0; + pmic->int_status[1] = MT6397_INT_STATUS1; + ret = mt6397_irq_init(pmic); + if (ret) + return ret; + } + ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); break; @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) break; } - pmic->irq = platform_get_irq(pdev, 0); - if (pmic->irq > 0) { - ret = mt6397_irq_init(pmic); - if (ret) - return ret; - } - fail_irq: if (ret) { irq_domain_remove(pmic->irq_domain); -- 1.8.1.1.dirty ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-30 7:25 ` Henry Chen 0 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-03-30 7:25 UTC (permalink / raw) To: linux-arm-kernel Some sub driver like RTC module need irq domain from parent to create irq mapping when driver initialize. so move mt6397_irq_init() before mfd_add_devices(). Signed-off-by: Henry Chen <henryc.chen@mediatek.com> --- This patch fixed the below warning based on "Linux kernel v4.6-rc1" WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 irq_create_mapping+0xc4/0xd0 --- drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c index 8e8d932..a879223 100644 --- a/drivers/mfd/mt6397-core.c +++ b/drivers/mfd/mt6397-core.c @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) goto fail_irq; } + pmic->irq = platform_get_irq(pdev, 0); + switch (id & 0xff) { case MT6323_CID_CODE: - pmic->int_con[0] = MT6323_INT_CON0; - pmic->int_con[1] = MT6323_INT_CON1; - pmic->int_status[0] = MT6323_INT_STATUS0; - pmic->int_status[1] = MT6323_INT_STATUS1; + if (pmic->irq > 0) { + pmic->int_con[0] = MT6323_INT_CON0; + pmic->int_con[1] = MT6323_INT_CON1; + pmic->int_status[0] = MT6323_INT_STATUS0; + pmic->int_status[1] = MT6323_INT_STATUS1; + ret = mt6397_irq_init(pmic); + if (ret) + return ret; + } + ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); break; case MT6397_CID_CODE: case MT6391_CID_CODE: - pmic->int_con[0] = MT6397_INT_CON0; - pmic->int_con[1] = MT6397_INT_CON1; - pmic->int_status[0] = MT6397_INT_STATUS0; - pmic->int_status[1] = MT6397_INT_STATUS1; + if (pmic->irq > 0) { + pmic->int_con[0] = MT6397_INT_CON0; + pmic->int_con[1] = MT6397_INT_CON1; + pmic->int_status[0] = MT6397_INT_STATUS0; + pmic->int_status[1] = MT6397_INT_STATUS1; + ret = mt6397_irq_init(pmic); + if (ret) + return ret; + } + ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); break; @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) break; } - pmic->irq = platform_get_irq(pdev, 0); - if (pmic->irq > 0) { - ret = mt6397_irq_init(pmic); - if (ret) - return ret; - } - fail_irq: if (ret) { irq_domain_remove(pmic->irq_domain); -- 1.8.1.1.dirty ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-30 7:25 ` Henry Chen 0 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-03-30 7:25 UTC (permalink / raw) To: Lee Jones Cc: Matthias Brugger, John Crispin, Sascha Hauer, Flora Fu, linux-kernel, linux-arm-kernel, linux-mediatek, Henry Chen Some sub driver like RTC module need irq domain from parent to create irq mapping when driver initialize. so move mt6397_irq_init() before mfd_add_devices(). Signed-off-by: Henry Chen <henryc.chen@mediatek.com> --- This patch fixed the below warning based on "Linux kernel v4.6-rc1" WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 irq_create_mapping+0xc4/0xd0 --- drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c index 8e8d932..a879223 100644 --- a/drivers/mfd/mt6397-core.c +++ b/drivers/mfd/mt6397-core.c @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) goto fail_irq; } + pmic->irq = platform_get_irq(pdev, 0); + switch (id & 0xff) { case MT6323_CID_CODE: - pmic->int_con[0] = MT6323_INT_CON0; - pmic->int_con[1] = MT6323_INT_CON1; - pmic->int_status[0] = MT6323_INT_STATUS0; - pmic->int_status[1] = MT6323_INT_STATUS1; + if (pmic->irq > 0) { + pmic->int_con[0] = MT6323_INT_CON0; + pmic->int_con[1] = MT6323_INT_CON1; + pmic->int_status[0] = MT6323_INT_STATUS0; + pmic->int_status[1] = MT6323_INT_STATUS1; + ret = mt6397_irq_init(pmic); + if (ret) + return ret; + } + ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); break; case MT6397_CID_CODE: case MT6391_CID_CODE: - pmic->int_con[0] = MT6397_INT_CON0; - pmic->int_con[1] = MT6397_INT_CON1; - pmic->int_status[0] = MT6397_INT_STATUS0; - pmic->int_status[1] = MT6397_INT_STATUS1; + if (pmic->irq > 0) { + pmic->int_con[0] = MT6397_INT_CON0; + pmic->int_con[1] = MT6397_INT_CON1; + pmic->int_status[0] = MT6397_INT_STATUS0; + pmic->int_status[1] = MT6397_INT_STATUS1; + ret = mt6397_irq_init(pmic); + if (ret) + return ret; + } + ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); break; @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) break; } - pmic->irq = platform_get_irq(pdev, 0); - if (pmic->irq > 0) { - ret = mt6397_irq_init(pmic); - if (ret) - return ret; - } - fail_irq: if (ret) { irq_domain_remove(pmic->irq_domain); -- 1.8.1.1.dirty ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-03-30 7:25 ` Henry Chen @ 2016-03-30 9:18 ` John Crispin -1 siblings, 0 replies; 25+ messages in thread From: John Crispin @ 2016-03-30 9:18 UTC (permalink / raw) To: Henry Chen, Lee Jones Cc: Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, Matthias Brugger, linux-arm-kernel Hi, small nitpick inline On 30/03/2016 09:25, Henry Chen wrote: > Some sub driver like RTC module need irq domain from parent to create > irq mapping when driver initialize. so move mt6397_irq_init() before > mfd_add_devices(). > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > --- > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > irq_create_mapping+0xc4/0xd0 > --- > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > 1 file changed, 22 insertions(+), 15 deletions(-) > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > index 8e8d932..a879223 100644 > --- a/drivers/mfd/mt6397-core.c > +++ b/drivers/mfd/mt6397-core.c > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > goto fail_irq; > } > > + pmic->irq = platform_get_irq(pdev, 0); > + > switch (id & 0xff) { > case MT6323_CID_CODE: > - pmic->int_con[0] = MT6323_INT_CON0; > - pmic->int_con[1] = MT6323_INT_CON1; > - pmic->int_status[0] = MT6323_INT_STATUS0; > - pmic->int_status[1] = MT6323_INT_STATUS1; > + if (pmic->irq > 0) { should this not be if (pmic->irq >= 0) { i think the code before your patch was wrong as linux irqs start with 0. John > + pmic->int_con[0] = MT6323_INT_CON0; > + pmic->int_con[1] = MT6323_INT_CON1; > + pmic->int_status[0] = MT6323_INT_STATUS0; > + pmic->int_status[1] = MT6323_INT_STATUS1; > + ret = mt6397_irq_init(pmic); > + if (ret) > + return ret; > + } > + > ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, > ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); > break; > > case MT6397_CID_CODE: > case MT6391_CID_CODE: > - pmic->int_con[0] = MT6397_INT_CON0; > - pmic->int_con[1] = MT6397_INT_CON1; > - pmic->int_status[0] = MT6397_INT_STATUS0; > - pmic->int_status[1] = MT6397_INT_STATUS1; > + if (pmic->irq > 0) { > + pmic->int_con[0] = MT6397_INT_CON0; > + pmic->int_con[1] = MT6397_INT_CON1; > + pmic->int_status[0] = MT6397_INT_STATUS0; > + pmic->int_status[1] = MT6397_INT_STATUS1; > + ret = mt6397_irq_init(pmic); > + if (ret) > + return ret; > + } > + > ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, > ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); > break; > @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) > break; > } > > - pmic->irq = platform_get_irq(pdev, 0); > - if (pmic->irq > 0) { > - ret = mt6397_irq_init(pmic); > - if (ret) > - return ret; > - } > - > fail_irq: > if (ret) { > irq_domain_remove(pmic->irq_domain); > ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-30 9:18 ` John Crispin 0 siblings, 0 replies; 25+ messages in thread From: John Crispin @ 2016-03-30 9:18 UTC (permalink / raw) To: linux-arm-kernel Hi, small nitpick inline On 30/03/2016 09:25, Henry Chen wrote: > Some sub driver like RTC module need irq domain from parent to create > irq mapping when driver initialize. so move mt6397_irq_init() before > mfd_add_devices(). > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > --- > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > irq_create_mapping+0xc4/0xd0 > --- > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > 1 file changed, 22 insertions(+), 15 deletions(-) > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > index 8e8d932..a879223 100644 > --- a/drivers/mfd/mt6397-core.c > +++ b/drivers/mfd/mt6397-core.c > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > goto fail_irq; > } > > + pmic->irq = platform_get_irq(pdev, 0); > + > switch (id & 0xff) { > case MT6323_CID_CODE: > - pmic->int_con[0] = MT6323_INT_CON0; > - pmic->int_con[1] = MT6323_INT_CON1; > - pmic->int_status[0] = MT6323_INT_STATUS0; > - pmic->int_status[1] = MT6323_INT_STATUS1; > + if (pmic->irq > 0) { should this not be if (pmic->irq >= 0) { i think the code before your patch was wrong as linux irqs start with 0. John > + pmic->int_con[0] = MT6323_INT_CON0; > + pmic->int_con[1] = MT6323_INT_CON1; > + pmic->int_status[0] = MT6323_INT_STATUS0; > + pmic->int_status[1] = MT6323_INT_STATUS1; > + ret = mt6397_irq_init(pmic); > + if (ret) > + return ret; > + } > + > ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, > ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); > break; > > case MT6397_CID_CODE: > case MT6391_CID_CODE: > - pmic->int_con[0] = MT6397_INT_CON0; > - pmic->int_con[1] = MT6397_INT_CON1; > - pmic->int_status[0] = MT6397_INT_STATUS0; > - pmic->int_status[1] = MT6397_INT_STATUS1; > + if (pmic->irq > 0) { > + pmic->int_con[0] = MT6397_INT_CON0; > + pmic->int_con[1] = MT6397_INT_CON1; > + pmic->int_status[0] = MT6397_INT_STATUS0; > + pmic->int_status[1] = MT6397_INT_STATUS1; > + ret = mt6397_irq_init(pmic); > + if (ret) > + return ret; > + } > + > ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, > ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); > break; > @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) > break; > } > > - pmic->irq = platform_get_irq(pdev, 0); > - if (pmic->irq > 0) { > - ret = mt6397_irq_init(pmic); > - if (ret) > - return ret; > - } > - > fail_irq: > if (ret) { > irq_domain_remove(pmic->irq_domain); > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-03-30 9:18 ` John Crispin (?) @ 2016-03-31 1:40 ` Henry Chen -1 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-03-31 1:40 UTC (permalink / raw) To: John Crispin Cc: Lee Jones, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, Matthias Brugger, linux-arm-kernel On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > Hi, > > small nitpick inline > > On 30/03/2016 09:25, Henry Chen wrote: > > Some sub driver like RTC module need irq domain from parent to create > > irq mapping when driver initialize. so move mt6397_irq_init() before > > mfd_add_devices(). > > > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > --- > > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > > irq_create_mapping+0xc4/0xd0 > > --- > > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > > 1 file changed, 22 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > > index 8e8d932..a879223 100644 > > --- a/drivers/mfd/mt6397-core.c > > +++ b/drivers/mfd/mt6397-core.c > > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > > goto fail_irq; > > } > > > > + pmic->irq = platform_get_irq(pdev, 0); > > + > > switch (id & 0xff) { > > case MT6323_CID_CODE: > > - pmic->int_con[0] = MT6323_INT_CON0; > > - pmic->int_con[1] = MT6323_INT_CON1; > > - pmic->int_status[0] = MT6323_INT_STATUS0; > > - pmic->int_status[1] = MT6323_INT_STATUS1; > > + if (pmic->irq > 0) { > > should this not be > > if (pmic->irq >= 0) { > > i think the code before your patch was wrong as linux irqs start with 0. > > John Hi John, Thanks, I will modify this. Henry > > > > + pmic->int_con[0] = MT6323_INT_CON0; > > + pmic->int_con[1] = MT6323_INT_CON1; > > + pmic->int_status[0] = MT6323_INT_STATUS0; > > + pmic->int_status[1] = MT6323_INT_STATUS1; > > + ret = mt6397_irq_init(pmic); > > + if (ret) > > + return ret; > > + } > > + > > ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, > > ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); > > break; > > > > case MT6397_CID_CODE: > > case MT6391_CID_CODE: > > - pmic->int_con[0] = MT6397_INT_CON0; > > - pmic->int_con[1] = MT6397_INT_CON1; > > - pmic->int_status[0] = MT6397_INT_STATUS0; > > - pmic->int_status[1] = MT6397_INT_STATUS1; > > + if (pmic->irq > 0) { > > + pmic->int_con[0] = MT6397_INT_CON0; > > + pmic->int_con[1] = MT6397_INT_CON1; > > + pmic->int_status[0] = MT6397_INT_STATUS0; > > + pmic->int_status[1] = MT6397_INT_STATUS1; > > + ret = mt6397_irq_init(pmic); > > + if (ret) > > + return ret; > > + } > > + > > ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, > > ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); > > break; > > @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) > > break; > > } > > > > - pmic->irq = platform_get_irq(pdev, 0); > > - if (pmic->irq > 0) { > > - ret = mt6397_irq_init(pmic); > > - if (ret) > > - return ret; > > - } > > - > > fail_irq: > > if (ret) { > > irq_domain_remove(pmic->irq_domain); > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-31 1:40 ` Henry Chen 0 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-03-31 1:40 UTC (permalink / raw) To: linux-arm-kernel On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > Hi, > > small nitpick inline > > On 30/03/2016 09:25, Henry Chen wrote: > > Some sub driver like RTC module need irq domain from parent to create > > irq mapping when driver initialize. so move mt6397_irq_init() before > > mfd_add_devices(). > > > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > --- > > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > > irq_create_mapping+0xc4/0xd0 > > --- > > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > > 1 file changed, 22 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > > index 8e8d932..a879223 100644 > > --- a/drivers/mfd/mt6397-core.c > > +++ b/drivers/mfd/mt6397-core.c > > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > > goto fail_irq; > > } > > > > + pmic->irq = platform_get_irq(pdev, 0); > > + > > switch (id & 0xff) { > > case MT6323_CID_CODE: > > - pmic->int_con[0] = MT6323_INT_CON0; > > - pmic->int_con[1] = MT6323_INT_CON1; > > - pmic->int_status[0] = MT6323_INT_STATUS0; > > - pmic->int_status[1] = MT6323_INT_STATUS1; > > + if (pmic->irq > 0) { > > should this not be > > if (pmic->irq >= 0) { > > i think the code before your patch was wrong as linux irqs start with 0. > > John Hi John, Thanks, I will modify this. Henry > > > > + pmic->int_con[0] = MT6323_INT_CON0; > > + pmic->int_con[1] = MT6323_INT_CON1; > > + pmic->int_status[0] = MT6323_INT_STATUS0; > > + pmic->int_status[1] = MT6323_INT_STATUS1; > > + ret = mt6397_irq_init(pmic); > > + if (ret) > > + return ret; > > + } > > + > > ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, > > ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); > > break; > > > > case MT6397_CID_CODE: > > case MT6391_CID_CODE: > > - pmic->int_con[0] = MT6397_INT_CON0; > > - pmic->int_con[1] = MT6397_INT_CON1; > > - pmic->int_status[0] = MT6397_INT_STATUS0; > > - pmic->int_status[1] = MT6397_INT_STATUS1; > > + if (pmic->irq > 0) { > > + pmic->int_con[0] = MT6397_INT_CON0; > > + pmic->int_con[1] = MT6397_INT_CON1; > > + pmic->int_status[0] = MT6397_INT_STATUS0; > > + pmic->int_status[1] = MT6397_INT_STATUS1; > > + ret = mt6397_irq_init(pmic); > > + if (ret) > > + return ret; > > + } > > + > > ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, > > ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); > > break; > > @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) > > break; > > } > > > > - pmic->irq = platform_get_irq(pdev, 0); > > - if (pmic->irq > 0) { > > - ret = mt6397_irq_init(pmic); > > - if (ret) > > - return ret; > > - } > > - > > fail_irq: > > if (ret) { > > irq_domain_remove(pmic->irq_domain); > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-31 1:40 ` Henry Chen 0 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-03-31 1:40 UTC (permalink / raw) To: John Crispin Cc: Lee Jones, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, Matthias Brugger, linux-arm-kernel On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > Hi, > > small nitpick inline > > On 30/03/2016 09:25, Henry Chen wrote: > > Some sub driver like RTC module need irq domain from parent to create > > irq mapping when driver initialize. so move mt6397_irq_init() before > > mfd_add_devices(). > > > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > --- > > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > > irq_create_mapping+0xc4/0xd0 > > --- > > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > > 1 file changed, 22 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > > index 8e8d932..a879223 100644 > > --- a/drivers/mfd/mt6397-core.c > > +++ b/drivers/mfd/mt6397-core.c > > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > > goto fail_irq; > > } > > > > + pmic->irq = platform_get_irq(pdev, 0); > > + > > switch (id & 0xff) { > > case MT6323_CID_CODE: > > - pmic->int_con[0] = MT6323_INT_CON0; > > - pmic->int_con[1] = MT6323_INT_CON1; > > - pmic->int_status[0] = MT6323_INT_STATUS0; > > - pmic->int_status[1] = MT6323_INT_STATUS1; > > + if (pmic->irq > 0) { > > should this not be > > if (pmic->irq >= 0) { > > i think the code before your patch was wrong as linux irqs start with 0. > > John Hi John, Thanks, I will modify this. Henry > > > > + pmic->int_con[0] = MT6323_INT_CON0; > > + pmic->int_con[1] = MT6323_INT_CON1; > > + pmic->int_status[0] = MT6323_INT_STATUS0; > > + pmic->int_status[1] = MT6323_INT_STATUS1; > > + ret = mt6397_irq_init(pmic); > > + if (ret) > > + return ret; > > + } > > + > > ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, > > ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); > > break; > > > > case MT6397_CID_CODE: > > case MT6391_CID_CODE: > > - pmic->int_con[0] = MT6397_INT_CON0; > > - pmic->int_con[1] = MT6397_INT_CON1; > > - pmic->int_status[0] = MT6397_INT_STATUS0; > > - pmic->int_status[1] = MT6397_INT_STATUS1; > > + if (pmic->irq > 0) { > > + pmic->int_con[0] = MT6397_INT_CON0; > > + pmic->int_con[1] = MT6397_INT_CON1; > > + pmic->int_status[0] = MT6397_INT_STATUS0; > > + pmic->int_status[1] = MT6397_INT_STATUS1; > > + ret = mt6397_irq_init(pmic); > > + if (ret) > > + return ret; > > + } > > + > > ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, > > ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); > > break; > > @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) > > break; > > } > > > > - pmic->irq = platform_get_irq(pdev, 0); > > - if (pmic->irq > 0) { > > - ret = mt6397_irq_init(pmic); > > - if (ret) > > - return ret; > > - } > > - > > fail_irq: > > if (ret) { > > irq_domain_remove(pmic->irq_domain); > > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-03-31 1:40 ` Henry Chen (?) @ 2016-03-31 2:32 ` Yingjoe Chen -1 siblings, 0 replies; 25+ messages in thread From: Yingjoe Chen @ 2016-03-31 2:32 UTC (permalink / raw) To: Henry Chen Cc: John Crispin, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, Matthias Brugger, Lee Jones, linux-arm-kernel On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > > Hi, > > > > small nitpick inline > > > > On 30/03/2016 09:25, Henry Chen wrote: > > > Some sub driver like RTC module need irq domain from parent to create > > > irq mapping when driver initialize. so move mt6397_irq_init() before > > > mfd_add_devices(). > > > > > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > > --- > > > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > > > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > > > irq_create_mapping+0xc4/0xd0 > > > --- > > > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > > > 1 file changed, 22 insertions(+), 15 deletions(-) > > > > > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > > > index 8e8d932..a879223 100644 > > > --- a/drivers/mfd/mt6397-core.c > > > +++ b/drivers/mfd/mt6397-core.c > > > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > > > goto fail_irq; > > > } > > > > > > + pmic->irq = platform_get_irq(pdev, 0); > > > + > > > switch (id & 0xff) { > > > case MT6323_CID_CODE: > > > - pmic->int_con[0] = MT6323_INT_CON0; > > > - pmic->int_con[1] = MT6323_INT_CON1; > > > - pmic->int_status[0] = MT6323_INT_STATUS0; > > > - pmic->int_status[1] = MT6323_INT_STATUS1; > > > + if (pmic->irq > 0) { > > > > should this not be > > > > if (pmic->irq >= 0) { > > > > i think the code before your patch was wrong as linux irqs start with 0. > > > > John > Hi John, > > Thanks, I will modify this. Linux irq start from 1, 0 is invalid. I can't find the document saying this now, but you could see this from irq_create_mapping() in kernel/irq/irqdomain.c I think the code should have check return from platform_get_irq and handle -EPROBE_DEFER, but maybe it should be another patch? BTW, in this function, it is possible that pmic->irq_domain will be NULL in fail_irq error handling. We should check before calling irq_domain_remove. Joe.C ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-31 2:32 ` Yingjoe Chen 0 siblings, 0 replies; 25+ messages in thread From: Yingjoe Chen @ 2016-03-31 2:32 UTC (permalink / raw) To: linux-arm-kernel On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > > Hi, > > > > small nitpick inline > > > > On 30/03/2016 09:25, Henry Chen wrote: > > > Some sub driver like RTC module need irq domain from parent to create > > > irq mapping when driver initialize. so move mt6397_irq_init() before > > > mfd_add_devices(). > > > > > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > > --- > > > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > > > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > > > irq_create_mapping+0xc4/0xd0 > > > --- > > > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > > > 1 file changed, 22 insertions(+), 15 deletions(-) > > > > > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > > > index 8e8d932..a879223 100644 > > > --- a/drivers/mfd/mt6397-core.c > > > +++ b/drivers/mfd/mt6397-core.c > > > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > > > goto fail_irq; > > > } > > > > > > + pmic->irq = platform_get_irq(pdev, 0); > > > + > > > switch (id & 0xff) { > > > case MT6323_CID_CODE: > > > - pmic->int_con[0] = MT6323_INT_CON0; > > > - pmic->int_con[1] = MT6323_INT_CON1; > > > - pmic->int_status[0] = MT6323_INT_STATUS0; > > > - pmic->int_status[1] = MT6323_INT_STATUS1; > > > + if (pmic->irq > 0) { > > > > should this not be > > > > if (pmic->irq >= 0) { > > > > i think the code before your patch was wrong as linux irqs start with 0. > > > > John > Hi John, > > Thanks, I will modify this. Linux irq start from 1, 0 is invalid. I can't find the document saying this now, but you could see this from irq_create_mapping() in kernel/irq/irqdomain.c I think the code should have check return from platform_get_irq and handle -EPROBE_DEFER, but maybe it should be another patch? BTW, in this function, it is possible that pmic->irq_domain will be NULL in fail_irq error handling. We should check before calling irq_domain_remove. Joe.C ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-31 2:32 ` Yingjoe Chen 0 siblings, 0 replies; 25+ messages in thread From: Yingjoe Chen @ 2016-03-31 2:32 UTC (permalink / raw) To: Henry Chen Cc: John Crispin, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, Matthias Brugger, Lee Jones, linux-arm-kernel On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > > Hi, > > > > small nitpick inline > > > > On 30/03/2016 09:25, Henry Chen wrote: > > > Some sub driver like RTC module need irq domain from parent to create > > > irq mapping when driver initialize. so move mt6397_irq_init() before > > > mfd_add_devices(). > > > > > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > > --- > > > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > > > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > > > irq_create_mapping+0xc4/0xd0 > > > --- > > > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > > > 1 file changed, 22 insertions(+), 15 deletions(-) > > > > > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > > > index 8e8d932..a879223 100644 > > > --- a/drivers/mfd/mt6397-core.c > > > +++ b/drivers/mfd/mt6397-core.c > > > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > > > goto fail_irq; > > > } > > > > > > + pmic->irq = platform_get_irq(pdev, 0); > > > + > > > switch (id & 0xff) { > > > case MT6323_CID_CODE: > > > - pmic->int_con[0] = MT6323_INT_CON0; > > > - pmic->int_con[1] = MT6323_INT_CON1; > > > - pmic->int_status[0] = MT6323_INT_STATUS0; > > > - pmic->int_status[1] = MT6323_INT_STATUS1; > > > + if (pmic->irq > 0) { > > > > should this not be > > > > if (pmic->irq >= 0) { > > > > i think the code before your patch was wrong as linux irqs start with 0. > > > > John > Hi John, > > Thanks, I will modify this. Linux irq start from 1, 0 is invalid. I can't find the document saying this now, but you could see this from irq_create_mapping() in kernel/irq/irqdomain.c I think the code should have check return from platform_get_irq and handle -EPROBE_DEFER, but maybe it should be another patch? BTW, in this function, it is possible that pmic->irq_domain will be NULL in fail_irq error handling. We should check before calling irq_domain_remove. Joe.C ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-03-31 2:32 ` Yingjoe Chen @ 2016-03-31 9:08 ` John Crispin -1 siblings, 0 replies; 25+ messages in thread From: John Crispin @ 2016-03-31 9:08 UTC (permalink / raw) To: Yingjoe Chen, Henry Chen Cc: Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, Matthias Brugger, Lee Jones, linux-arm-kernel On 31/03/2016 04:32, Yingjoe Chen wrote: > On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: >> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: >>> Hi, >>> >>> small nitpick inline >>> >>> On 30/03/2016 09:25, Henry Chen wrote: >>>> Some sub driver like RTC module need irq domain from parent to create >>>> irq mapping when driver initialize. so move mt6397_irq_init() before >>>> mfd_add_devices(). >>>> >>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> >>>> --- >>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" >>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 >>>> irq_create_mapping+0xc4/0xd0 >>>> --- >>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- >>>> 1 file changed, 22 insertions(+), 15 deletions(-) >>>> >>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c >>>> index 8e8d932..a879223 100644 >>>> --- a/drivers/mfd/mt6397-core.c >>>> +++ b/drivers/mfd/mt6397-core.c >>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) >>>> goto fail_irq; >>>> } >>>> >>>> + pmic->irq = platform_get_irq(pdev, 0); >>>> + >>>> switch (id & 0xff) { >>>> case MT6323_CID_CODE: >>>> - pmic->int_con[0] = MT6323_INT_CON0; >>>> - pmic->int_con[1] = MT6323_INT_CON1; >>>> - pmic->int_status[0] = MT6323_INT_STATUS0; >>>> - pmic->int_status[1] = MT6323_INT_STATUS1; >>>> + if (pmic->irq > 0) { >>> >>> should this not be >>> >>> if (pmic->irq >= 0) { >>> >>> i think the code before your patch was wrong as linux irqs start with 0. >>> >>> John >> Hi John, >> >> Thanks, I will modify this. > > Linux irq start from 1, 0 is invalid. I can't find the document saying > this now, but you could see this from irq_create_mapping() in > kernel/irq/irqdomain.c > > I think the code should have check return from platform_get_irq and > handle -EPROBE_DEFER, but maybe it should be another patch? > > BTW, in this function, it is possible that pmic->irq_domain will be NULL > in fail_irq error handling. We should check before calling > irq_domain_remove. > > Joe.C > Hi, looking at http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there is a check in line #100 ret >= 0 checking the return value of pmic->irq = platform_get_irq(pdev, 0); should follow the same pattern i think .. unless i have a thinko and am reading the code wrong. John ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-31 9:08 ` John Crispin 0 siblings, 0 replies; 25+ messages in thread From: John Crispin @ 2016-03-31 9:08 UTC (permalink / raw) To: linux-arm-kernel On 31/03/2016 04:32, Yingjoe Chen wrote: > On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: >> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: >>> Hi, >>> >>> small nitpick inline >>> >>> On 30/03/2016 09:25, Henry Chen wrote: >>>> Some sub driver like RTC module need irq domain from parent to create >>>> irq mapping when driver initialize. so move mt6397_irq_init() before >>>> mfd_add_devices(). >>>> >>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> >>>> --- >>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" >>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 >>>> irq_create_mapping+0xc4/0xd0 >>>> --- >>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- >>>> 1 file changed, 22 insertions(+), 15 deletions(-) >>>> >>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c >>>> index 8e8d932..a879223 100644 >>>> --- a/drivers/mfd/mt6397-core.c >>>> +++ b/drivers/mfd/mt6397-core.c >>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) >>>> goto fail_irq; >>>> } >>>> >>>> + pmic->irq = platform_get_irq(pdev, 0); >>>> + >>>> switch (id & 0xff) { >>>> case MT6323_CID_CODE: >>>> - pmic->int_con[0] = MT6323_INT_CON0; >>>> - pmic->int_con[1] = MT6323_INT_CON1; >>>> - pmic->int_status[0] = MT6323_INT_STATUS0; >>>> - pmic->int_status[1] = MT6323_INT_STATUS1; >>>> + if (pmic->irq > 0) { >>> >>> should this not be >>> >>> if (pmic->irq >= 0) { >>> >>> i think the code before your patch was wrong as linux irqs start with 0. >>> >>> John >> Hi John, >> >> Thanks, I will modify this. > > Linux irq start from 1, 0 is invalid. I can't find the document saying > this now, but you could see this from irq_create_mapping() in > kernel/irq/irqdomain.c > > I think the code should have check return from platform_get_irq and > handle -EPROBE_DEFER, but maybe it should be another patch? > > BTW, in this function, it is possible that pmic->irq_domain will be NULL > in fail_irq error handling. We should check before calling > irq_domain_remove. > > Joe.C > Hi, looking at http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there is a check in line #100 ret >= 0 checking the return value of pmic->irq = platform_get_irq(pdev, 0); should follow the same pattern i think .. unless i have a thinko and am reading the code wrong. John ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-03-31 9:08 ` John Crispin (?) @ 2016-03-31 13:41 ` Yingjoe Chen -1 siblings, 0 replies; 25+ messages in thread From: Yingjoe Chen @ 2016-03-31 13:41 UTC (permalink / raw) To: John Crispin Cc: Henry Chen, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, Matthias Brugger, Lee Jones, linux-arm-kernel, linux On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: > > On 31/03/2016 04:32, Yingjoe Chen wrote: > > On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > >> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > >>> Hi, > >>> > >>> small nitpick inline > >>> > >>> On 30/03/2016 09:25, Henry Chen wrote: > >>>> Some sub driver like RTC module need irq domain from parent to create > >>>> irq mapping when driver initialize. so move mt6397_irq_init() before > >>>> mfd_add_devices(). > >>>> > >>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > >>>> --- > >>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" > >>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > >>>> irq_create_mapping+0xc4/0xd0 > >>>> --- > >>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > >>>> 1 file changed, 22 insertions(+), 15 deletions(-) > >>>> > >>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > >>>> index 8e8d932..a879223 100644 > >>>> --- a/drivers/mfd/mt6397-core.c > >>>> +++ b/drivers/mfd/mt6397-core.c > >>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > >>>> goto fail_irq; > >>>> } > >>>> > >>>> + pmic->irq = platform_get_irq(pdev, 0); > >>>> + > >>>> switch (id & 0xff) { > >>>> case MT6323_CID_CODE: > >>>> - pmic->int_con[0] = MT6323_INT_CON0; > >>>> - pmic->int_con[1] = MT6323_INT_CON1; > >>>> - pmic->int_status[0] = MT6323_INT_STATUS0; > >>>> - pmic->int_status[1] = MT6323_INT_STATUS1; > >>>> + if (pmic->irq > 0) { > >>> > >>> should this not be > >>> > >>> if (pmic->irq >= 0) { > >>> > >>> i think the code before your patch was wrong as linux irqs start with 0. > >>> > >>> John > >> Hi John, > >> > >> Thanks, I will modify this. > > > > Linux irq start from 1, 0 is invalid. I can't find the document saying > > this now, but you could see this from irq_create_mapping() in > > kernel/irq/irqdomain.c > > > > I think the code should have check return from platform_get_irq and > > handle -EPROBE_DEFER, but maybe it should be another patch? > > > > BTW, in this function, it is possible that pmic->irq_domain will be NULL > > in fail_irq error handling. We should check before calling > > irq_domain_remove. > > > > Joe.C > > > > Hi, > > looking at > http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there > is a check in line #100 ret >= 0 > > checking the return value of pmic->irq = platform_get_irq(pdev, 0); > should follow the same pattern i think .. unless i have a thinko and am > reading the code wrong. I'm not sure why platform_get_irq() check for 0, but I think the code logic is differnet. When platform_get_irq() return 0 to our code, it means we don't have valid irq to use. In this case it doesn't make any sense to continue init irq. Joe.C ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-31 13:41 ` Yingjoe Chen 0 siblings, 0 replies; 25+ messages in thread From: Yingjoe Chen @ 2016-03-31 13:41 UTC (permalink / raw) To: linux-arm-kernel On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: > > On 31/03/2016 04:32, Yingjoe Chen wrote: > > On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > >> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > >>> Hi, > >>> > >>> small nitpick inline > >>> > >>> On 30/03/2016 09:25, Henry Chen wrote: > >>>> Some sub driver like RTC module need irq domain from parent to create > >>>> irq mapping when driver initialize. so move mt6397_irq_init() before > >>>> mfd_add_devices(). > >>>> > >>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > >>>> --- > >>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" > >>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > >>>> irq_create_mapping+0xc4/0xd0 > >>>> --- > >>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > >>>> 1 file changed, 22 insertions(+), 15 deletions(-) > >>>> > >>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > >>>> index 8e8d932..a879223 100644 > >>>> --- a/drivers/mfd/mt6397-core.c > >>>> +++ b/drivers/mfd/mt6397-core.c > >>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > >>>> goto fail_irq; > >>>> } > >>>> > >>>> + pmic->irq = platform_get_irq(pdev, 0); > >>>> + > >>>> switch (id & 0xff) { > >>>> case MT6323_CID_CODE: > >>>> - pmic->int_con[0] = MT6323_INT_CON0; > >>>> - pmic->int_con[1] = MT6323_INT_CON1; > >>>> - pmic->int_status[0] = MT6323_INT_STATUS0; > >>>> - pmic->int_status[1] = MT6323_INT_STATUS1; > >>>> + if (pmic->irq > 0) { > >>> > >>> should this not be > >>> > >>> if (pmic->irq >= 0) { > >>> > >>> i think the code before your patch was wrong as linux irqs start with 0. > >>> > >>> John > >> Hi John, > >> > >> Thanks, I will modify this. > > > > Linux irq start from 1, 0 is invalid. I can't find the document saying > > this now, but you could see this from irq_create_mapping() in > > kernel/irq/irqdomain.c > > > > I think the code should have check return from platform_get_irq and > > handle -EPROBE_DEFER, but maybe it should be another patch? > > > > BTW, in this function, it is possible that pmic->irq_domain will be NULL > > in fail_irq error handling. We should check before calling > > irq_domain_remove. > > > > Joe.C > > > > Hi, > > looking at > http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there > is a check in line #100 ret >= 0 > > checking the return value of pmic->irq = platform_get_irq(pdev, 0); > should follow the same pattern i think .. unless i have a thinko and am > reading the code wrong. I'm not sure why platform_get_irq() check for 0, but I think the code logic is differnet. When platform_get_irq() return 0 to our code, it means we don't have valid irq to use. In this case it doesn't make any sense to continue init irq. Joe.C ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-31 13:41 ` Yingjoe Chen 0 siblings, 0 replies; 25+ messages in thread From: Yingjoe Chen @ 2016-03-31 13:41 UTC (permalink / raw) To: John Crispin Cc: Henry Chen, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, Matthias Brugger, Lee Jones, linux-arm-kernel, linux On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: > > On 31/03/2016 04:32, Yingjoe Chen wrote: > > On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > >> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > >>> Hi, > >>> > >>> small nitpick inline > >>> > >>> On 30/03/2016 09:25, Henry Chen wrote: > >>>> Some sub driver like RTC module need irq domain from parent to create > >>>> irq mapping when driver initialize. so move mt6397_irq_init() before > >>>> mfd_add_devices(). > >>>> > >>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > >>>> --- > >>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" > >>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > >>>> irq_create_mapping+0xc4/0xd0 > >>>> --- > >>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > >>>> 1 file changed, 22 insertions(+), 15 deletions(-) > >>>> > >>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > >>>> index 8e8d932..a879223 100644 > >>>> --- a/drivers/mfd/mt6397-core.c > >>>> +++ b/drivers/mfd/mt6397-core.c > >>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > >>>> goto fail_irq; > >>>> } > >>>> > >>>> + pmic->irq = platform_get_irq(pdev, 0); > >>>> + > >>>> switch (id & 0xff) { > >>>> case MT6323_CID_CODE: > >>>> - pmic->int_con[0] = MT6323_INT_CON0; > >>>> - pmic->int_con[1] = MT6323_INT_CON1; > >>>> - pmic->int_status[0] = MT6323_INT_STATUS0; > >>>> - pmic->int_status[1] = MT6323_INT_STATUS1; > >>>> + if (pmic->irq > 0) { > >>> > >>> should this not be > >>> > >>> if (pmic->irq >= 0) { > >>> > >>> i think the code before your patch was wrong as linux irqs start with 0. > >>> > >>> John > >> Hi John, > >> > >> Thanks, I will modify this. > > > > Linux irq start from 1, 0 is invalid. I can't find the document saying > > this now, but you could see this from irq_create_mapping() in > > kernel/irq/irqdomain.c > > > > I think the code should have check return from platform_get_irq and > > handle -EPROBE_DEFER, but maybe it should be another patch? > > > > BTW, in this function, it is possible that pmic->irq_domain will be NULL > > in fail_irq error handling. We should check before calling > > irq_domain_remove. > > > > Joe.C > > > > Hi, > > looking at > http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there > is a check in line #100 ret >= 0 > > checking the return value of pmic->irq = platform_get_irq(pdev, 0); > should follow the same pattern i think .. unless i have a thinko and am > reading the code wrong. I'm not sure why platform_get_irq() check for 0, but I think the code logic is differnet. When platform_get_irq() return 0 to our code, it means we don't have valid irq to use. In this case it doesn't make any sense to continue init irq. Joe.C ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-03-31 13:41 ` Yingjoe Chen @ 2016-03-31 14:07 ` John Crispin -1 siblings, 0 replies; 25+ messages in thread From: John Crispin @ 2016-03-31 14:07 UTC (permalink / raw) To: Yingjoe Chen Cc: Sascha Hauer, linux-kernel, Henry Chen, Flora Fu, linux-mediatek, linux, Matthias Brugger, Lee Jones, linux-arm-kernel On 31/03/2016 15:41, Yingjoe Chen wrote: > On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: >> >> On 31/03/2016 04:32, Yingjoe Chen wrote: >>> On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: >>>> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: >>>>> Hi, >>>>> >>>>> small nitpick inline >>>>> >>>>> On 30/03/2016 09:25, Henry Chen wrote: >>>>>> Some sub driver like RTC module need irq domain from parent to create >>>>>> irq mapping when driver initialize. so move mt6397_irq_init() before >>>>>> mfd_add_devices(). >>>>>> >>>>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> >>>>>> --- >>>>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" >>>>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 >>>>>> irq_create_mapping+0xc4/0xd0 >>>>>> --- >>>>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- >>>>>> 1 file changed, 22 insertions(+), 15 deletions(-) >>>>>> >>>>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c >>>>>> index 8e8d932..a879223 100644 >>>>>> --- a/drivers/mfd/mt6397-core.c >>>>>> +++ b/drivers/mfd/mt6397-core.c >>>>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) >>>>>> goto fail_irq; >>>>>> } >>>>>> >>>>>> + pmic->irq = platform_get_irq(pdev, 0); >>>>>> + >>>>>> switch (id & 0xff) { >>>>>> case MT6323_CID_CODE: >>>>>> - pmic->int_con[0] = MT6323_INT_CON0; >>>>>> - pmic->int_con[1] = MT6323_INT_CON1; >>>>>> - pmic->int_status[0] = MT6323_INT_STATUS0; >>>>>> - pmic->int_status[1] = MT6323_INT_STATUS1; >>>>>> + if (pmic->irq > 0) { >>>>> >>>>> should this not be >>>>> >>>>> if (pmic->irq >= 0) { >>>>> >>>>> i think the code before your patch was wrong as linux irqs start with 0. >>>>> >>>>> John >>>> Hi John, >>>> >>>> Thanks, I will modify this. >>> >>> Linux irq start from 1, 0 is invalid. I can't find the document saying >>> this now, but you could see this from irq_create_mapping() in >>> kernel/irq/irqdomain.c >>> >>> I think the code should have check return from platform_get_irq and >>> handle -EPROBE_DEFER, but maybe it should be another patch? >>> >>> BTW, in this function, it is possible that pmic->irq_domain will be NULL >>> in fail_irq error handling. We should check before calling >>> irq_domain_remove. >>> >>> Joe.C >>> >> >> Hi, >> >> looking at >> http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there >> is a check in line #100 ret >= 0 >> >> checking the return value of pmic->irq = platform_get_irq(pdev, 0); >> should follow the same pattern i think .. unless i have a thinko and am >> reading the code wrong. > > > I'm not sure why platform_get_irq() check for 0, but I think the code > logic is differnet. > > When platform_get_irq() return 0 to our code, it means we don't have > valid irq to use. In this case it doesn't make any sense to continue > init irq. > > > Joe.C > --> http://lwn.net/Articles/470820/ indeed ARM has changed this is seems. was not aware of this change, sorry for the noise John ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-03-31 14:07 ` John Crispin 0 siblings, 0 replies; 25+ messages in thread From: John Crispin @ 2016-03-31 14:07 UTC (permalink / raw) To: linux-arm-kernel On 31/03/2016 15:41, Yingjoe Chen wrote: > On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: >> >> On 31/03/2016 04:32, Yingjoe Chen wrote: >>> On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: >>>> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: >>>>> Hi, >>>>> >>>>> small nitpick inline >>>>> >>>>> On 30/03/2016 09:25, Henry Chen wrote: >>>>>> Some sub driver like RTC module need irq domain from parent to create >>>>>> irq mapping when driver initialize. so move mt6397_irq_init() before >>>>>> mfd_add_devices(). >>>>>> >>>>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> >>>>>> --- >>>>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" >>>>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 >>>>>> irq_create_mapping+0xc4/0xd0 >>>>>> --- >>>>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- >>>>>> 1 file changed, 22 insertions(+), 15 deletions(-) >>>>>> >>>>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c >>>>>> index 8e8d932..a879223 100644 >>>>>> --- a/drivers/mfd/mt6397-core.c >>>>>> +++ b/drivers/mfd/mt6397-core.c >>>>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) >>>>>> goto fail_irq; >>>>>> } >>>>>> >>>>>> + pmic->irq = platform_get_irq(pdev, 0); >>>>>> + >>>>>> switch (id & 0xff) { >>>>>> case MT6323_CID_CODE: >>>>>> - pmic->int_con[0] = MT6323_INT_CON0; >>>>>> - pmic->int_con[1] = MT6323_INT_CON1; >>>>>> - pmic->int_status[0] = MT6323_INT_STATUS0; >>>>>> - pmic->int_status[1] = MT6323_INT_STATUS1; >>>>>> + if (pmic->irq > 0) { >>>>> >>>>> should this not be >>>>> >>>>> if (pmic->irq >= 0) { >>>>> >>>>> i think the code before your patch was wrong as linux irqs start with 0. >>>>> >>>>> John >>>> Hi John, >>>> >>>> Thanks, I will modify this. >>> >>> Linux irq start from 1, 0 is invalid. I can't find the document saying >>> this now, but you could see this from irq_create_mapping() in >>> kernel/irq/irqdomain.c >>> >>> I think the code should have check return from platform_get_irq and >>> handle -EPROBE_DEFER, but maybe it should be another patch? >>> >>> BTW, in this function, it is possible that pmic->irq_domain will be NULL >>> in fail_irq error handling. We should check before calling >>> irq_domain_remove. >>> >>> Joe.C >>> >> >> Hi, >> >> looking at >> http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there >> is a check in line #100 ret >= 0 >> >> checking the return value of pmic->irq = platform_get_irq(pdev, 0); >> should follow the same pattern i think .. unless i have a thinko and am >> reading the code wrong. > > > I'm not sure why platform_get_irq() check for 0, but I think the code > logic is differnet. > > When platform_get_irq() return 0 to our code, it means we don't have > valid irq to use. In this case it doesn't make any sense to continue > init irq. > > > Joe.C > --> http://lwn.net/Articles/470820/ indeed ARM has changed this is seems. was not aware of this change, sorry for the noise John ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-03-31 14:07 ` John Crispin (?) @ 2016-04-06 2:47 ` Henry Chen -1 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-04-06 2:47 UTC (permalink / raw) To: John Crispin Cc: Yingjoe Chen, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, linux, Matthias Brugger, Lee Jones, linux-arm-kernel On Thu, 2016-03-31 at 16:07 +0200, John Crispin wrote: > > On 31/03/2016 15:41, Yingjoe Chen wrote: > > On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: > >> > >> On 31/03/2016 04:32, Yingjoe Chen wrote: > >>> On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > >>>> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > >>>>> Hi, > >>>>> > >>>>> small nitpick inline > >>>>> > >>>>> On 30/03/2016 09:25, Henry Chen wrote: > >>>>>> Some sub driver like RTC module need irq domain from parent to create > >>>>>> irq mapping when driver initialize. so move mt6397_irq_init() before > >>>>>> mfd_add_devices(). > >>>>>> > >>>>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > >>>>>> --- > >>>>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" > >>>>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > >>>>>> irq_create_mapping+0xc4/0xd0 > >>>>>> --- > >>>>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > >>>>>> 1 file changed, 22 insertions(+), 15 deletions(-) > >>>>>> > >>>>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > >>>>>> index 8e8d932..a879223 100644 > >>>>>> --- a/drivers/mfd/mt6397-core.c > >>>>>> +++ b/drivers/mfd/mt6397-core.c > >>>>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > >>>>>> goto fail_irq; > >>>>>> } > >>>>>> > >>>>>> + pmic->irq = platform_get_irq(pdev, 0); > >>>>>> + > >>>>>> switch (id & 0xff) { > >>>>>> case MT6323_CID_CODE: > >>>>>> - pmic->int_con[0] = MT6323_INT_CON0; > >>>>>> - pmic->int_con[1] = MT6323_INT_CON1; > >>>>>> - pmic->int_status[0] = MT6323_INT_STATUS0; > >>>>>> - pmic->int_status[1] = MT6323_INT_STATUS1; > >>>>>> + if (pmic->irq > 0) { > >>>>> > >>>>> should this not be > >>>>> > >>>>> if (pmic->irq >= 0) { > >>>>> > >>>>> i think the code before your patch was wrong as linux irqs start with 0. > >>>>> > >>>>> John > >>>> Hi John, > >>>> > >>>> Thanks, I will modify this. > >>> > >>> Linux irq start from 1, 0 is invalid. I can't find the document saying > >>> this now, but you could see this from irq_create_mapping() in > >>> kernel/irq/irqdomain.c > >>> > >>> I think the code should have check return from platform_get_irq and > >>> handle -EPROBE_DEFER, but maybe it should be another patch? > >>> > >>> BTW, in this function, it is possible that pmic->irq_domain will be NULL > >>> in fail_irq error handling. We should check before calling > >>> irq_domain_remove. > >>> > >>> Joe.C > >>> > >> > >> Hi, > >> > >> looking at > >> http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there > >> is a check in line #100 ret >= 0 > >> > >> checking the return value of pmic->irq = platform_get_irq(pdev, 0); > >> should follow the same pattern i think .. unless i have a thinko and am > >> reading the code wrong. > > > > > > I'm not sure why platform_get_irq() check for 0, but I think the code > > logic is differnet. > > > > When platform_get_irq() return 0 to our code, it means we don't have > > valid irq to use. In this case it doesn't make any sense to continue > > init irq. > > > > > > Joe.C > > > > > --> http://lwn.net/Articles/470820/ > > indeed ARM has changed this is seems. was not aware of this change, > sorry for the noise > > John Hi Lee/Joe/John, Thanks for comment, that means we can keep this patch for 4.6-rc1 regression (RTC get NULL irq issue), right? I will send another patch to fixed above error handling problem. Thanks. Henry ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-04-06 2:47 ` Henry Chen 0 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-04-06 2:47 UTC (permalink / raw) To: linux-arm-kernel On Thu, 2016-03-31 at 16:07 +0200, John Crispin wrote: > > On 31/03/2016 15:41, Yingjoe Chen wrote: > > On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: > >> > >> On 31/03/2016 04:32, Yingjoe Chen wrote: > >>> On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > >>>> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > >>>>> Hi, > >>>>> > >>>>> small nitpick inline > >>>>> > >>>>> On 30/03/2016 09:25, Henry Chen wrote: > >>>>>> Some sub driver like RTC module need irq domain from parent to create > >>>>>> irq mapping when driver initialize. so move mt6397_irq_init() before > >>>>>> mfd_add_devices(). > >>>>>> > >>>>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > >>>>>> --- > >>>>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" > >>>>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > >>>>>> irq_create_mapping+0xc4/0xd0 > >>>>>> --- > >>>>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > >>>>>> 1 file changed, 22 insertions(+), 15 deletions(-) > >>>>>> > >>>>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > >>>>>> index 8e8d932..a879223 100644 > >>>>>> --- a/drivers/mfd/mt6397-core.c > >>>>>> +++ b/drivers/mfd/mt6397-core.c > >>>>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > >>>>>> goto fail_irq; > >>>>>> } > >>>>>> > >>>>>> + pmic->irq = platform_get_irq(pdev, 0); > >>>>>> + > >>>>>> switch (id & 0xff) { > >>>>>> case MT6323_CID_CODE: > >>>>>> - pmic->int_con[0] = MT6323_INT_CON0; > >>>>>> - pmic->int_con[1] = MT6323_INT_CON1; > >>>>>> - pmic->int_status[0] = MT6323_INT_STATUS0; > >>>>>> - pmic->int_status[1] = MT6323_INT_STATUS1; > >>>>>> + if (pmic->irq > 0) { > >>>>> > >>>>> should this not be > >>>>> > >>>>> if (pmic->irq >= 0) { > >>>>> > >>>>> i think the code before your patch was wrong as linux irqs start with 0. > >>>>> > >>>>> John > >>>> Hi John, > >>>> > >>>> Thanks, I will modify this. > >>> > >>> Linux irq start from 1, 0 is invalid. I can't find the document saying > >>> this now, but you could see this from irq_create_mapping() in > >>> kernel/irq/irqdomain.c > >>> > >>> I think the code should have check return from platform_get_irq and > >>> handle -EPROBE_DEFER, but maybe it should be another patch? > >>> > >>> BTW, in this function, it is possible that pmic->irq_domain will be NULL > >>> in fail_irq error handling. We should check before calling > >>> irq_domain_remove. > >>> > >>> Joe.C > >>> > >> > >> Hi, > >> > >> looking at > >> http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there > >> is a check in line #100 ret >= 0 > >> > >> checking the return value of pmic->irq = platform_get_irq(pdev, 0); > >> should follow the same pattern i think .. unless i have a thinko and am > >> reading the code wrong. > > > > > > I'm not sure why platform_get_irq() check for 0, but I think the code > > logic is differnet. > > > > When platform_get_irq() return 0 to our code, it means we don't have > > valid irq to use. In this case it doesn't make any sense to continue > > init irq. > > > > > > Joe.C > > > > > --> http://lwn.net/Articles/470820/ > > indeed ARM has changed this is seems. was not aware of this change, > sorry for the noise > > John Hi Lee/Joe/John, Thanks for comment, that means we can keep this patch for 4.6-rc1 regression (RTC get NULL irq issue), right? I will send another patch to fixed above error handling problem. Thanks. Henry ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-04-06 2:47 ` Henry Chen 0 siblings, 0 replies; 25+ messages in thread From: Henry Chen @ 2016-04-06 2:47 UTC (permalink / raw) To: John Crispin Cc: Yingjoe Chen, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, linux, Matthias Brugger, Lee Jones, linux-arm-kernel On Thu, 2016-03-31 at 16:07 +0200, John Crispin wrote: > > On 31/03/2016 15:41, Yingjoe Chen wrote: > > On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: > >> > >> On 31/03/2016 04:32, Yingjoe Chen wrote: > >>> On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > >>>> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > >>>>> Hi, > >>>>> > >>>>> small nitpick inline > >>>>> > >>>>> On 30/03/2016 09:25, Henry Chen wrote: > >>>>>> Some sub driver like RTC module need irq domain from parent to create > >>>>>> irq mapping when driver initialize. so move mt6397_irq_init() before > >>>>>> mfd_add_devices(). > >>>>>> > >>>>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > >>>>>> --- > >>>>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" > >>>>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > >>>>>> irq_create_mapping+0xc4/0xd0 > >>>>>> --- > >>>>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > >>>>>> 1 file changed, 22 insertions(+), 15 deletions(-) > >>>>>> > >>>>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > >>>>>> index 8e8d932..a879223 100644 > >>>>>> --- a/drivers/mfd/mt6397-core.c > >>>>>> +++ b/drivers/mfd/mt6397-core.c > >>>>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > >>>>>> goto fail_irq; > >>>>>> } > >>>>>> > >>>>>> + pmic->irq = platform_get_irq(pdev, 0); > >>>>>> + > >>>>>> switch (id & 0xff) { > >>>>>> case MT6323_CID_CODE: > >>>>>> - pmic->int_con[0] = MT6323_INT_CON0; > >>>>>> - pmic->int_con[1] = MT6323_INT_CON1; > >>>>>> - pmic->int_status[0] = MT6323_INT_STATUS0; > >>>>>> - pmic->int_status[1] = MT6323_INT_STATUS1; > >>>>>> + if (pmic->irq > 0) { > >>>>> > >>>>> should this not be > >>>>> > >>>>> if (pmic->irq >= 0) { > >>>>> > >>>>> i think the code before your patch was wrong as linux irqs start with 0. > >>>>> > >>>>> John > >>>> Hi John, > >>>> > >>>> Thanks, I will modify this. > >>> > >>> Linux irq start from 1, 0 is invalid. I can't find the document saying > >>> this now, but you could see this from irq_create_mapping() in > >>> kernel/irq/irqdomain.c > >>> > >>> I think the code should have check return from platform_get_irq and > >>> handle -EPROBE_DEFER, but maybe it should be another patch? > >>> > >>> BTW, in this function, it is possible that pmic->irq_domain will be NULL > >>> in fail_irq error handling. We should check before calling > >>> irq_domain_remove. > >>> > >>> Joe.C > >>> > >> > >> Hi, > >> > >> looking at > >> http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there > >> is a check in line #100 ret >= 0 > >> > >> checking the return value of pmic->irq = platform_get_irq(pdev, 0); > >> should follow the same pattern i think .. unless i have a thinko and am > >> reading the code wrong. > > > > > > I'm not sure why platform_get_irq() check for 0, but I think the code > > logic is differnet. > > > > When platform_get_irq() return 0 to our code, it means we don't have > > valid irq to use. In this case it doesn't make any sense to continue > > init irq. > > > > > > Joe.C > > > > > --> http://lwn.net/Articles/470820/ > > indeed ARM has changed this is seems. was not aware of this change, > sorry for the noise > > John Hi Lee/Joe/John, Thanks for comment, that means we can keep this patch for 4.6-rc1 regression (RTC get NULL irq issue), right? I will send another patch to fixed above error handling problem. Thanks. Henry ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-04-06 2:47 ` Henry Chen @ 2016-04-07 7:52 ` Lee Jones -1 siblings, 0 replies; 25+ messages in thread From: Lee Jones @ 2016-04-07 7:52 UTC (permalink / raw) To: Henry Chen Cc: John Crispin, Yingjoe Chen, Sascha Hauer, linux-kernel, Flora Fu, linux-mediatek, linux, Matthias Brugger, linux-arm-kernel On Wed, 06 Apr 2016, Henry Chen wrote: > On Thu, 2016-03-31 at 16:07 +0200, John Crispin wrote: > > > > On 31/03/2016 15:41, Yingjoe Chen wrote: > > > On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: > > >> > > >> On 31/03/2016 04:32, Yingjoe Chen wrote: > > >>> On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > > >>>> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > > >>>>> Hi, > > >>>>> > > >>>>> small nitpick inline > > >>>>> > > >>>>> On 30/03/2016 09:25, Henry Chen wrote: > > >>>>>> Some sub driver like RTC module need irq domain from parent to create > > >>>>>> irq mapping when driver initialize. so move mt6397_irq_init() before > > >>>>>> mfd_add_devices(). > > >>>>>> > > >>>>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > >>>>>> --- > > >>>>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" > > >>>>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > > >>>>>> irq_create_mapping+0xc4/0xd0 > > >>>>>> --- > > >>>>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > > >>>>>> 1 file changed, 22 insertions(+), 15 deletions(-) > > >>>>>> > > >>>>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > > >>>>>> index 8e8d932..a879223 100644 > > >>>>>> --- a/drivers/mfd/mt6397-core.c > > >>>>>> +++ b/drivers/mfd/mt6397-core.c > > >>>>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > > >>>>>> goto fail_irq; > > >>>>>> } > > >>>>>> > > >>>>>> + pmic->irq = platform_get_irq(pdev, 0); > > >>>>>> + > > >>>>>> switch (id & 0xff) { > > >>>>>> case MT6323_CID_CODE: > > >>>>>> - pmic->int_con[0] = MT6323_INT_CON0; > > >>>>>> - pmic->int_con[1] = MT6323_INT_CON1; > > >>>>>> - pmic->int_status[0] = MT6323_INT_STATUS0; > > >>>>>> - pmic->int_status[1] = MT6323_INT_STATUS1; > > >>>>>> + if (pmic->irq > 0) { > > >>>>> > > >>>>> should this not be > > >>>>> > > >>>>> if (pmic->irq >= 0) { > > >>>>> > > >>>>> i think the code before your patch was wrong as linux irqs start with 0. > > >>>>> > > >>>>> John > > >>>> Hi John, > > >>>> > > >>>> Thanks, I will modify this. > > >>> > > >>> Linux irq start from 1, 0 is invalid. I can't find the document saying > > >>> this now, but you could see this from irq_create_mapping() in > > >>> kernel/irq/irqdomain.c > > >>> > > >>> I think the code should have check return from platform_get_irq and > > >>> handle -EPROBE_DEFER, but maybe it should be another patch? > > >>> > > >>> BTW, in this function, it is possible that pmic->irq_domain will be NULL > > >>> in fail_irq error handling. We should check before calling > > >>> irq_domain_remove. > > >>> > > >>> Joe.C > > >>> > > >> > > >> Hi, > > >> > > >> looking at > > >> http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there > > >> is a check in line #100 ret >= 0 > > >> > > >> checking the return value of pmic->irq = platform_get_irq(pdev, 0); > > >> should follow the same pattern i think .. unless i have a thinko and am > > >> reading the code wrong. > > > > > > > > > I'm not sure why platform_get_irq() check for 0, but I think the code > > > logic is differnet. > > > > > > When platform_get_irq() return 0 to our code, it means we don't have > > > valid irq to use. In this case it doesn't make any sense to continue > > > init irq. > > > > > > > > > Joe.C > > > > > > > > > --> http://lwn.net/Articles/470820/ > > > > indeed ARM has changed this is seems. was not aware of this change, > > sorry for the noise > > > > John > > Hi Lee/Joe/John, > > Thanks for comment, that means we can keep this patch for 4.6-rc1 > regression (RTC get NULL irq issue), right? Just re-send everything with any Acks that you collected. > I will send another patch to fixed above error handling problem. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-04-07 7:52 ` Lee Jones 0 siblings, 0 replies; 25+ messages in thread From: Lee Jones @ 2016-04-07 7:52 UTC (permalink / raw) To: linux-arm-kernel On Wed, 06 Apr 2016, Henry Chen wrote: > On Thu, 2016-03-31 at 16:07 +0200, John Crispin wrote: > > > > On 31/03/2016 15:41, Yingjoe Chen wrote: > > > On Thu, 2016-03-31 at 11:08 +0200, John Crispin wrote: > > >> > > >> On 31/03/2016 04:32, Yingjoe Chen wrote: > > >>> On Thu, 2016-03-31 at 09:40 +0800, Henry Chen wrote: > > >>>> On Wed, 2016-03-30 at 11:18 +0200, John Crispin wrote: > > >>>>> Hi, > > >>>>> > > >>>>> small nitpick inline > > >>>>> > > >>>>> On 30/03/2016 09:25, Henry Chen wrote: > > >>>>>> Some sub driver like RTC module need irq domain from parent to create > > >>>>>> irq mapping when driver initialize. so move mt6397_irq_init() before > > >>>>>> mfd_add_devices(). > > >>>>>> > > >>>>>> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > >>>>>> --- > > >>>>>> This patch fixed the below warning based on "Linux kernel v4.6-rc1" > > >>>>>> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > > >>>>>> irq_create_mapping+0xc4/0xd0 > > >>>>>> --- > > >>>>>> drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > > >>>>>> 1 file changed, 22 insertions(+), 15 deletions(-) > > >>>>>> > > >>>>>> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > > >>>>>> index 8e8d932..a879223 100644 > > >>>>>> --- a/drivers/mfd/mt6397-core.c > > >>>>>> +++ b/drivers/mfd/mt6397-core.c > > >>>>>> @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > > >>>>>> goto fail_irq; > > >>>>>> } > > >>>>>> > > >>>>>> + pmic->irq = platform_get_irq(pdev, 0); > > >>>>>> + > > >>>>>> switch (id & 0xff) { > > >>>>>> case MT6323_CID_CODE: > > >>>>>> - pmic->int_con[0] = MT6323_INT_CON0; > > >>>>>> - pmic->int_con[1] = MT6323_INT_CON1; > > >>>>>> - pmic->int_status[0] = MT6323_INT_STATUS0; > > >>>>>> - pmic->int_status[1] = MT6323_INT_STATUS1; > > >>>>>> + if (pmic->irq > 0) { > > >>>>> > > >>>>> should this not be > > >>>>> > > >>>>> if (pmic->irq >= 0) { > > >>>>> > > >>>>> i think the code before your patch was wrong as linux irqs start with 0. > > >>>>> > > >>>>> John > > >>>> Hi John, > > >>>> > > >>>> Thanks, I will modify this. > > >>> > > >>> Linux irq start from 1, 0 is invalid. I can't find the document saying > > >>> this now, but you could see this from irq_create_mapping() in > > >>> kernel/irq/irqdomain.c > > >>> > > >>> I think the code should have check return from platform_get_irq and > > >>> handle -EPROBE_DEFER, but maybe it should be another patch? > > >>> > > >>> BTW, in this function, it is possible that pmic->irq_domain will be NULL > > >>> in fail_irq error handling. We should check before calling > > >>> irq_domain_remove. > > >>> > > >>> Joe.C > > >>> > > >> > > >> Hi, > > >> > > >> looking at > > >> http://lxr.free-electrons.com/source/drivers/base/platform.c#L87 there > > >> is a check in line #100 ret >= 0 > > >> > > >> checking the return value of pmic->irq = platform_get_irq(pdev, 0); > > >> should follow the same pattern i think .. unless i have a thinko and am > > >> reading the code wrong. > > > > > > > > > I'm not sure why platform_get_irq() check for 0, but I think the code > > > logic is differnet. > > > > > > When platform_get_irq() return 0 to our code, it means we don't have > > > valid irq to use. In this case it doesn't make any sense to continue > > > init irq. > > > > > > > > > Joe.C > > > > > > > > > --> http://lwn.net/Articles/470820/ > > > > indeed ARM has changed this is seems. was not aware of this change, > > sorry for the noise > > > > John > > Hi Lee/Joe/John, > > Thanks for comment, that means we can keep this patch for 4.6-rc1 > regression (RTC get NULL irq issue), right? Just re-send everything with any Acks that you collected. > I will send another patch to fixed above error handling problem. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() 2016-03-30 7:25 ` Henry Chen @ 2016-04-07 8:51 ` John Crispin -1 siblings, 0 replies; 25+ messages in thread From: John Crispin @ 2016-04-07 8:51 UTC (permalink / raw) To: Henry Chen, Lee Jones Cc: Matthias Brugger, Sascha Hauer, Flora Fu, linux-kernel, linux-arm-kernel, linux-mediatek On 30/03/2016 09:25, Henry Chen wrote: > Some sub driver like RTC module need irq domain from parent to create > irq mapping when driver initialize. so move mt6397_irq_init() before > mfd_add_devices(). > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Acked-by: John Crispin <blogic@openwrt.org> > --- > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > irq_create_mapping+0xc4/0xd0 > --- > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > 1 file changed, 22 insertions(+), 15 deletions(-) > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > index 8e8d932..a879223 100644 > --- a/drivers/mfd/mt6397-core.c > +++ b/drivers/mfd/mt6397-core.c > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > goto fail_irq; > } > > + pmic->irq = platform_get_irq(pdev, 0); > + > switch (id & 0xff) { > case MT6323_CID_CODE: > - pmic->int_con[0] = MT6323_INT_CON0; > - pmic->int_con[1] = MT6323_INT_CON1; > - pmic->int_status[0] = MT6323_INT_STATUS0; > - pmic->int_status[1] = MT6323_INT_STATUS1; > + if (pmic->irq > 0) { > + pmic->int_con[0] = MT6323_INT_CON0; > + pmic->int_con[1] = MT6323_INT_CON1; > + pmic->int_status[0] = MT6323_INT_STATUS0; > + pmic->int_status[1] = MT6323_INT_STATUS1; > + ret = mt6397_irq_init(pmic); > + if (ret) > + return ret; > + } > + > ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, > ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); > break; > > case MT6397_CID_CODE: > case MT6391_CID_CODE: > - pmic->int_con[0] = MT6397_INT_CON0; > - pmic->int_con[1] = MT6397_INT_CON1; > - pmic->int_status[0] = MT6397_INT_STATUS0; > - pmic->int_status[1] = MT6397_INT_STATUS1; > + if (pmic->irq > 0) { > + pmic->int_con[0] = MT6397_INT_CON0; > + pmic->int_con[1] = MT6397_INT_CON1; > + pmic->int_status[0] = MT6397_INT_STATUS0; > + pmic->int_status[1] = MT6397_INT_STATUS1; > + ret = mt6397_irq_init(pmic); > + if (ret) > + return ret; > + } > + > ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, > ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); > break; > @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) > break; > } > > - pmic->irq = platform_get_irq(pdev, 0); > - if (pmic->irq > 0) { > - ret = mt6397_irq_init(pmic); > - if (ret) > - return ret; > - } > - > fail_irq: > if (ret) { > irq_domain_remove(pmic->irq_domain); > ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() @ 2016-04-07 8:51 ` John Crispin 0 siblings, 0 replies; 25+ messages in thread From: John Crispin @ 2016-04-07 8:51 UTC (permalink / raw) To: linux-arm-kernel On 30/03/2016 09:25, Henry Chen wrote: > Some sub driver like RTC module need irq domain from parent to create > irq mapping when driver initialize. so move mt6397_irq_init() before > mfd_add_devices(). > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Acked-by: John Crispin <blogic@openwrt.org> > --- > This patch fixed the below warning based on "Linux kernel v4.6-rc1" > WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471 > irq_create_mapping+0xc4/0xd0 > --- > drivers/mfd/mt6397-core.c | 37 ++++++++++++++++++++++--------------- > 1 file changed, 22 insertions(+), 15 deletions(-) > > diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c > index 8e8d932..a879223 100644 > --- a/drivers/mfd/mt6397-core.c > +++ b/drivers/mfd/mt6397-core.c > @@ -270,22 +270,36 @@ static int mt6397_probe(struct platform_device *pdev) > goto fail_irq; > } > > + pmic->irq = platform_get_irq(pdev, 0); > + > switch (id & 0xff) { > case MT6323_CID_CODE: > - pmic->int_con[0] = MT6323_INT_CON0; > - pmic->int_con[1] = MT6323_INT_CON1; > - pmic->int_status[0] = MT6323_INT_STATUS0; > - pmic->int_status[1] = MT6323_INT_STATUS1; > + if (pmic->irq > 0) { > + pmic->int_con[0] = MT6323_INT_CON0; > + pmic->int_con[1] = MT6323_INT_CON1; > + pmic->int_status[0] = MT6323_INT_STATUS0; > + pmic->int_status[1] = MT6323_INT_STATUS1; > + ret = mt6397_irq_init(pmic); > + if (ret) > + return ret; > + } > + > ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs, > ARRAY_SIZE(mt6323_devs), NULL, 0, NULL); > break; > > case MT6397_CID_CODE: > case MT6391_CID_CODE: > - pmic->int_con[0] = MT6397_INT_CON0; > - pmic->int_con[1] = MT6397_INT_CON1; > - pmic->int_status[0] = MT6397_INT_STATUS0; > - pmic->int_status[1] = MT6397_INT_STATUS1; > + if (pmic->irq > 0) { > + pmic->int_con[0] = MT6397_INT_CON0; > + pmic->int_con[1] = MT6397_INT_CON1; > + pmic->int_status[0] = MT6397_INT_STATUS0; > + pmic->int_status[1] = MT6397_INT_STATUS1; > + ret = mt6397_irq_init(pmic); > + if (ret) > + return ret; > + } > + > ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs, > ARRAY_SIZE(mt6397_devs), NULL, 0, NULL); > break; > @@ -296,13 +310,6 @@ static int mt6397_probe(struct platform_device *pdev) > break; > } > > - pmic->irq = platform_get_irq(pdev, 0); > - if (pmic->irq > 0) { > - ret = mt6397_irq_init(pmic); > - if (ret) > - return ret; > - } > - > fail_irq: > if (ret) { > irq_domain_remove(pmic->irq_domain); > ^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2016-04-07 8:51 UTC | newest] Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-03-30 7:25 [PATCH] mfd: mt6397: irq domain should initialize before mfd_add_devices() Henry Chen 2016-03-30 7:25 ` Henry Chen 2016-03-30 7:25 ` Henry Chen 2016-03-30 9:18 ` John Crispin 2016-03-30 9:18 ` John Crispin 2016-03-31 1:40 ` Henry Chen 2016-03-31 1:40 ` Henry Chen 2016-03-31 1:40 ` Henry Chen 2016-03-31 2:32 ` Yingjoe Chen 2016-03-31 2:32 ` Yingjoe Chen 2016-03-31 2:32 ` Yingjoe Chen 2016-03-31 9:08 ` John Crispin 2016-03-31 9:08 ` John Crispin 2016-03-31 13:41 ` Yingjoe Chen 2016-03-31 13:41 ` Yingjoe Chen 2016-03-31 13:41 ` Yingjoe Chen 2016-03-31 14:07 ` John Crispin 2016-03-31 14:07 ` John Crispin 2016-04-06 2:47 ` Henry Chen 2016-04-06 2:47 ` Henry Chen 2016-04-06 2:47 ` Henry Chen 2016-04-07 7:52 ` Lee Jones 2016-04-07 7:52 ` Lee Jones 2016-04-07 8:51 ` John Crispin 2016-04-07 8:51 ` John Crispin
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.