[U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion

[Stefan Roese <sr@denx.de>]

Hi Heiko,

On 13.04.2016 09:00, Heiko Schocher wrote:
> Am 13.04.2016 um 07:56 schrieb Stefan Roese:
>> Hi Heiko,
>>
>> On 13.04.2016 07:49, Heiko Schocher wrote:
>>> Hello Stefan,
>>>
>>> Am 12.04.2016 um 15:22 schrieb Stefan Roese:
>>>> Hi Heiko,
>>>>
>>>> On 28.03.2016 09:33, Heiko Schocher wrote:
>>>>> Am 23.03.2016 um 06:46 schrieb Stefan Roese:
>>>>>> This patch prepares the designware I2C driver for the DM conversion.
>>>>>> This is mainly done by removing struct i2c_adapter from the functions
>>>>>> that shall be used by the DM driver version as well.
>>>>>>
>>>>>> Signed-off-by: Stefan Roese <sr@denx.de>
>>>>>> Cc: Simon Glass <sjg@chromium.org>
>>>>>> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
>>>>>> Cc: Marek Vasut <marex@denx.de>
>>>>>> Cc: Heiko Schocher <hs@denx.de>
>>>>>> ---
>>>>>> v2:
>>>>>> - Added Reviewed-by from Bin
>>>>>>
>>>>>>    drivers/i2c/designware_i2c.c | 173
>>>>>> ++++++++++++++++++++++---------------------
>>>>>>    1 file changed, 90 insertions(+), 83 deletions(-)
>>>>>
>>>>> I tried to apply this patch, but get the following error:
>>>>>
>>>>> Wende an: i2c: designware_i2c: Prepare for DM driver conversion
>>>>> fatal: sha1 information is lacking or useless
>>>>> (drivers/i2c/designware_i2c.c).
>>>>> Dem Repository fehlen notwendige Blobs um auf einen 3-Wege-Merge
>>>>> zur?ckzufallen.
>>>>> Kann nicht zu 3-Wege-Merge zur?ckfallen.
>>>>> Anwendung des Patches fehlgeschlagen bei 0001 i2c: designware_i2c:
>>>>> Prepare for DM driver conversion
>>>>>
>>>>> I tried the this patch on current mainline, with the following
>>>>> patches applied:
>>>>>
>>>>> http://patchwork.ozlabs.org/patch/601112/
>>>>> http://patchwork.ozlabs.org/patch/601128/
>>>>> http://patchwork.ozlabs.org/patch/601117/
>>>>>
>>>>> Could you take a look?
>>>>
>>>> This should be fixed with v3 of this patch:
>>>>
>>>> https://patchwork.ozlabs.org/patch/609406/
>>>>
>>>> Could you give it another try please?
>>>
>>> Yes, this patch applies now fine, but the patch:
>>>
>>> [U-Boot,5/6,v2] i2c: designware_i2c: Add DM support
>>> http://patchwork.ozlabs.org/patch/601116/
>>>
>>> fails now:
>>>
>>> --2016-04-13 07:30:54--  http://patchwork.ozlabs.org/patch/601116/mbox
>>> Aufl?sen des Hostnamens ?patchwork.ozlabs.org (patchwork.ozlabs.org)? ?
>>> 103.22.144.67, 2401:3900:2:1::2
>>> Verbindungsaufbau zu patchwork.ozlabs.org
>>> (patchwork.ozlabs.org)|103.22.144.67|:80 ? verbunden.
>>> HTTP-Anforderung gesendet, auf Antwort wird gewartet ? 301 MOVED
>>> PERMANENTLY
>>> Platz: http://patchwork.ozlabs.org/patch/601116/mbox/ [folgend]
>>> --2016-04-13 07:30:54--  http://patchwork.ozlabs.org/patch/601116/mbox/
>>> Wiederverwendung der bestehenden Verbindung zu patchwork.ozlabs.org:80.
>>> HTTP-Anforderung gesendet, auf Antwort wird gewartet ? 200 OK
>>> L?nge: nicht spezifiziert [text/plain]
>>> Wird in ??mbox?? gespeichert.
>>>
>>> mbox                                         [ <=>
>>>                              ]   6,06K  --.-KB/s    in 0,004s
>>>
>>> 2016-04-13 07:30:54 (1,39 MB/s) - ?mbox? gespeichert [6202]
>>>
>>> total: 0 errors, 0 warnings, 0 checks, 181 lines checked
>>>
>>> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
>>> MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE
>>> PREFER_ETHER_ADDR_COPY USLEEP_RANGE
>>>
>>> mbox has no obvious style problems and is ready for submission.
>>> Wende an: i2c: designware_i2c: Add DM support
>>> fatal: sha1 information is lacking or useless
>>> (drivers/i2c/designware_i2c.c).
>>> Dem Repository fehlen notwendige Blobs um auf einen 3-Wege-Merge
>>> zur?ckzufallen.
>>> Kann nicht zu 3-Wege-Merge zur?ckfallen.
>>> Anwendung des Patches fehlgeschlagen bei 0001 i2c: designware_i2c: Add
>>> DM support
>>> Die Kopie des fehlgeschlagenen Patches befindet sich in:
>>>      /home/hs/i2c/u-boot/.git/rebase-apply/patch
>>> Wenn Sie das Problem gel?st haben, f?hren Sie "git am --continue" aus.
>>> Falls Sie diesen Patch auslassen m?chten, f?hren Sie stattdessen
>>> "git am --skip" aus.
>>> Um den urspr?nglichen Branch wiederherzustellen und die Anwendung der
>>> Patches abzubrechen, f?hren Sie "git am --abort" aus.
>>> pollux:u-boot hs [master] $
>>>
>>> Base is current mainline (with 2 i2c patches from Michal, but they
>>> should not interfere with your patches ...):
>>>
>>> pollux:u-boot hs [master] $ git log --oneline
>>> 2ddd09a i2c: designware_i2c: Prepare for DM driver conversion
>>> f824253 i2c: designware_i2c: Integrate set_speed() into
>>> dw_i2c_set_bus_speed()
>>> 709a9e6 i2c: designware_i2c: Add dw_i2c_enable() helper function
>>> 1b89299 i2c: designware_i2c: Add ic_enable_status to ic_regs struct
>>> d4cc513 dm: i2c: Add driver for Cadence I2C IP
>>> be332ef i2c: Describe Cadence I2C devicetree bindings
>>> 39fbd98 Merge git://www.denx.de/git/u-boot-marvell
>>>
>>> patches from you in the above list:
>>> - [U-Boot,1/6,v2] i2c: designware_i2c: Add ic_enable_status to ic_regs
>>> struct
>>> http://patchwork.ozlabs.org/patch/601112/
>>> - [U-Boot,2/6,v3] i2c: designware_i2c: Add dw_i2c_enable() helper
>>> function
>>> http://patchwork.ozlabs.org/patch/601128/
>>> - [U-Boot,3/6,v2] i2c: designware_i2c: Integrate set_speed() into
>>> dw_i2c_set_bus_speed()
>>> http://patchwork.ozlabs.org/patch/601117/
>>> - [U-Boot,v3] i2c: designware_i2c: Prepare for DM driver conversion
>>> http://patchwork.ozlabs.org/patch/609406/
>>>
>>> Did I missed an update patch?
>>
>> No, its most likely a problem with the updated patch from yesterday.
>> Could you please use the "-3" option with "git am" to apply this
>> patch? This works for me:
>>
>> $ git am -3
>> ~/Downloads/U-Boot-5-6-v2-i2c-designware_i2c-Add-DM-support\(1\).patch
>> Applying: i2c: designware_i2c: Add DM support
>> Using index info to reconstruct a base tree...
>> M       drivers/i2c/designware_i2c.c
>> Falling back to patching base and 3-way merge...
>> Auto-merging drivers/i2c/designware_i2c.c
>
> Hmm... I use "git am -3" ... I see this log:
> ">> Kann nicht zu 3-Wege-Merge zur?ckfallen."
>
> Do you really work on mainline, with only the patches I listed?

Yes, thats what I use. Perhaps a difference in the git version
that explains why this works for me:

$ git --version
git version 2.8.1

If this does not work, I'll rebase all 6 patches again and send
them to the list later.

Thanks,
Stefan