* [U-Boot] [PATCH v2] dm: spi: Read default speed values from DT
@ 2016-04-13 10:07 Vignesh R
2016-04-13 10:11 ` Vignesh R
0 siblings, 1 reply; 2+ messages in thread
From: Vignesh R @ 2016-04-13 10:07 UTC (permalink / raw)
To: u-boot
In case of DT boot, don't read default speed for SPI from
CONFIG_*, instead read from DT node. This will make sure that boards
with multiple SPI/QSPI controllers can be probed at different
bus frequencies.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
v2: Initialize speed, mode to 0 instead of -1
cmd/sf.c | 2 ++
drivers/spi/spi-uclass.c | 8 ++++++--
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/cmd/sf.c b/cmd/sf.c
index 42862d9d921a..286906c3a151 100644
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -88,6 +88,8 @@ static int do_spi_flash_probe(int argc, char * const argv[])
#ifdef CONFIG_DM_SPI_FLASH
struct udevice *new, *bus_dev;
int ret;
+ /* In DM mode defaults will be taken from DT */
+ speed = 0, mode = 0;
#else
struct spi_flash *new;
#endif
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index 5561f36762f9..5fb5630e2981 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -264,6 +264,7 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
struct udevice **busp, struct spi_slave **devp)
{
struct udevice *bus, *dev;
+ struct dm_spi_slave_platdata *plat;
bool created = false;
int ret;
@@ -280,8 +281,6 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
* SPI flash chip - we will bind to the correct driver.
*/
if (ret == -ENODEV && drv_name) {
- struct dm_spi_slave_platdata *plat;
-
debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n",
__func__, dev_name, busnum, cs, drv_name);
ret = device_bind_driver(bus, drv_name, dev_name, &dev);
@@ -308,6 +307,11 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
slave->dev = dev;
}
+ plat = dev_get_parent_platdata(dev);
+ if (!speed) {
+ speed = plat->max_hz;
+ mode = plat->mode;
+ }
ret = spi_set_speed_mode(bus, speed, mode);
if (ret)
goto err;
--
2.8.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH v2] dm: spi: Read default speed values from DT
2016-04-13 10:07 [U-Boot] [PATCH v2] dm: spi: Read default speed values from DT Vignesh R
@ 2016-04-13 10:11 ` Vignesh R
0 siblings, 0 replies; 2+ messages in thread
From: Vignesh R @ 2016-04-13 10:11 UTC (permalink / raw)
To: u-boot
On 04/13/2016 03:37 PM, Vignesh R wrote:
> In case of DT boot, don't read default speed for SPI from
> CONFIG_*, instead read from DT node. This will make sure that boards
> with multiple SPI/QSPI controllers can be probed at different
> bus frequencies.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
>
Please ignore this patch. I have sent v3 with updated commit message.
Sorry for the spam.
> v2: Initialize speed, mode to 0 instead of -1
>
> cmd/sf.c | 2 ++
> drivers/spi/spi-uclass.c | 8 ++++++--
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/cmd/sf.c b/cmd/sf.c
> index 42862d9d921a..286906c3a151 100644
> --- a/cmd/sf.c
> +++ b/cmd/sf.c
> @@ -88,6 +88,8 @@ static int do_spi_flash_probe(int argc, char * const argv[])
> #ifdef CONFIG_DM_SPI_FLASH
> struct udevice *new, *bus_dev;
> int ret;
> + /* In DM mode defaults will be taken from DT */
> + speed = 0, mode = 0;
> #else
> struct spi_flash *new;
> #endif
> diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
> index 5561f36762f9..5fb5630e2981 100644
> --- a/drivers/spi/spi-uclass.c
> +++ b/drivers/spi/spi-uclass.c
> @@ -264,6 +264,7 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
> struct udevice **busp, struct spi_slave **devp)
> {
> struct udevice *bus, *dev;
> + struct dm_spi_slave_platdata *plat;
> bool created = false;
> int ret;
>
> @@ -280,8 +281,6 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
> * SPI flash chip - we will bind to the correct driver.
> */
> if (ret == -ENODEV && drv_name) {
> - struct dm_spi_slave_platdata *plat;
> -
> debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n",
> __func__, dev_name, busnum, cs, drv_name);
> ret = device_bind_driver(bus, drv_name, dev_name, &dev);
> @@ -308,6 +307,11 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
> slave->dev = dev;
> }
>
> + plat = dev_get_parent_platdata(dev);
> + if (!speed) {
> + speed = plat->max_hz;
> + mode = plat->mode;
> + }
> ret = spi_set_speed_mode(bus, speed, mode);
> if (ret)
> goto err;
>
--
Regards
Vignesh
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-04-13 10:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-13 10:07 [U-Boot] [PATCH v2] dm: spi: Read default speed values from DT Vignesh R
2016-04-13 10:11 ` Vignesh R
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.