[PATCH v6 00/10] arm64: Add support for KVM with ACPI

[PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Julien Grall]

Hello,

This patch series allows KVM to work with ACPI on ARM64.

Currently, the firmware tables are parsed by the the virtual timer and virtual
GIC code in order to configure them correctly.

However the parsing of these tables is already done in the GIC and arch timer
drivers. This patch series introduces new helpers to retrieve the information
from the different drivers in order to avoid duplication of the parsing code.

To make the merge easier via the different trees, each patch modifies a single
subsystem. The suggested plan to merge the series is divided in 3 steps:

1) Patches #1-#2 are merged via the clocksource tree
   Patches #2-#7 are merged via the irqchip tree
2) Patches #8-#9 are merge via the KVM tree
3) Patch #10 is merged via the clocksource tree.

For all the changes see in each patch.

Regards,


Julien Grall (10):
  clocksource: arm_arch_timer: Gather KVM specific information in a
    structure
  clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the
    virtual IRQ
  irqchip/gic-v2: Gather ACPI specific data in a single structure
  irqchip/gic-v2: Parse and export virtual GIC information
  irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "
  irqchip/gic-v3: Gather all ACPI specific data in a single structure
  irqchip/gic-v3: Parse and export virtual GIC information
  KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the
    firmware tables
  KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware
    tables
  clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

 drivers/clocksource/arm_arch_timer.c   |  11 ++-
 drivers/irqchip/irq-gic-common.c       |  13 +++
 drivers/irqchip/irq-gic-common.h       |   3 +
 drivers/irqchip/irq-gic-v3.c           | 176 +++++++++++++++++++++++++++------
 drivers/irqchip/irq-gic.c              |  87 +++++++++++++++-
 include/clocksource/arm_arch_timer.h   |  12 +--
 include/kvm/arm_vgic.h                 |   7 +-
 include/linux/irqchip/arm-gic-common.h |  34 +++++++
 virt/kvm/arm/arch_timer.c              |  40 +++-----
 virt/kvm/arm/vgic-v2.c                 |  61 +++++-------
 virt/kvm/arm/vgic-v3.c                 |  47 +++------
 virt/kvm/arm/vgic.c                    |  50 +++++-----
 12 files changed, 377 insertions(+), 164 deletions(-)
 create mode 100644 include/linux/irqchip/arm-gic-common.h

-- 
1.9.1

[PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Julien Grall]

Hello,

This patch series allows KVM to work with ACPI on ARM64.

Currently, the firmware tables are parsed by the the virtual timer and virtual
GIC code in order to configure them correctly.

However the parsing of these tables is already done in the GIC and arch timer
drivers. This patch series introduces new helpers to retrieve the information
from the different drivers in order to avoid duplication of the parsing code.

To make the merge easier via the different trees, each patch modifies a single
subsystem. The suggested plan to merge the series is divided in 3 steps:

1) Patches #1-#2 are merged via the clocksource tree
   Patches #2-#7 are merged via the irqchip tree
2) Patches #8-#9 are merge via the KVM tree
3) Patch #10 is merged via the clocksource tree.

For all the changes see in each patch.

Regards,


Julien Grall (10):
  clocksource: arm_arch_timer: Gather KVM specific information in a
    structure
  clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the
    virtual IRQ
  irqchip/gic-v2: Gather ACPI specific data in a single structure
  irqchip/gic-v2: Parse and export virtual GIC information
  irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "
  irqchip/gic-v3: Gather all ACPI specific data in a single structure
  irqchip/gic-v3: Parse and export virtual GIC information
  KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the
    firmware tables
  KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware
    tables
  clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

 drivers/clocksource/arm_arch_timer.c   |  11 ++-
 drivers/irqchip/irq-gic-common.c       |  13 +++
 drivers/irqchip/irq-gic-common.h       |   3 +
 drivers/irqchip/irq-gic-v3.c           | 176 +++++++++++++++++++++++++++------
 drivers/irqchip/irq-gic.c              |  87 +++++++++++++++-
 include/clocksource/arm_arch_timer.h   |  12 +--
 include/kvm/arm_vgic.h                 |   7 +-
 include/linux/irqchip/arm-gic-common.h |  34 +++++++
 virt/kvm/arm/arch_timer.c              |  40 +++-----
 virt/kvm/arm/vgic-v2.c                 |  61 +++++-------
 virt/kvm/arm/vgic-v3.c                 |  47 +++------
 virt/kvm/arm/vgic.c                    |  50 +++++-----
 12 files changed, 377 insertions(+), 164 deletions(-)
 create mode 100644 include/linux/irqchip/arm-gic-common.h

-- 
1.9.1

[PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Julien Grall]

Hello,

This patch series allows KVM to work with ACPI on ARM64.

Currently, the firmware tables are parsed by the the virtual timer and virtual
GIC code in order to configure them correctly.

However the parsing of these tables is already done in the GIC and arch timer
drivers. This patch series introduces new helpers to retrieve the information
from the different drivers in order to avoid duplication of the parsing code.

To make the merge easier via the different trees, each patch modifies a single
subsystem. The suggested plan to merge the series is divided in 3 steps:

1) Patches #1-#2 are merged via the clocksource tree
   Patches #2-#7 are merged via the irqchip tree
2) Patches #8-#9 are merge via the KVM tree
3) Patch #10 is merged via the clocksource tree.

For all the changes see in each patch.

Regards,


Julien Grall (10):
  clocksource: arm_arch_timer: Gather KVM specific information in a
    structure
  clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the
    virtual IRQ
  irqchip/gic-v2: Gather ACPI specific data in a single structure
  irqchip/gic-v2: Parse and export virtual GIC information
  irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "
  irqchip/gic-v3: Gather all ACPI specific data in a single structure
  irqchip/gic-v3: Parse and export virtual GIC information
  KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the
    firmware tables
  KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware
    tables
  clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

 drivers/clocksource/arm_arch_timer.c   |  11 ++-
 drivers/irqchip/irq-gic-common.c       |  13 +++
 drivers/irqchip/irq-gic-common.h       |   3 +
 drivers/irqchip/irq-gic-v3.c           | 176 +++++++++++++++++++++++++++------
 drivers/irqchip/irq-gic.c              |  87 +++++++++++++++-
 include/clocksource/arm_arch_timer.h   |  12 +--
 include/kvm/arm_vgic.h                 |   7 +-
 include/linux/irqchip/arm-gic-common.h |  34 +++++++
 virt/kvm/arm/arch_timer.c              |  40 +++-----
 virt/kvm/arm/vgic-v2.c                 |  61 +++++-------
 virt/kvm/arm/vgic-v3.c                 |  47 +++------
 virt/kvm/arm/vgic.c                    |  50 +++++-----
 12 files changed, 377 insertions(+), 164 deletions(-)
 create mode 100644 include/linux/irqchip/arm-gic-common.h

-- 
1.9.1

[PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Julien Grall]

Introduce a structure which are filled up by the arch timer driver and
used by the virtual timer in KVM.

The first member of this structure will be the timecounter. More members
will be added later.

A stub for the new helper isn't introduced because KVM requires the arch
timer for both ARM64 and ARM32.

The function arch_timer_get_timecounter is kept for the time being and
will be dropped in a subsequent patch.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Christoffer's acked-by

    Changes in v3:
        - Rename the patch
        - Move the KVM changes and removal of arch_timer_get_timecounter
        in separate patches.
---
 drivers/clocksource/arm_arch_timer.c | 12 +++++++++---
 include/clocksource/arm_arch_timer.h |  5 +++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 5152b38..62bdfe7 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -468,11 +468,16 @@ static struct cyclecounter cyclecounter = {
 	.mask	= CLOCKSOURCE_MASK(56),
 };
 
-static struct timecounter timecounter;
+static struct arch_timer_kvm_info arch_timer_kvm_info;
+
+struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
+{
+	return &arch_timer_kvm_info;
+}
 
 struct timecounter *arch_timer_get_timecounter(void)
 {
-	return &timecounter;
+	return &arch_timer_kvm_info.timecounter;
 }
 
 static void __init arch_counter_register(unsigned type)
@@ -500,7 +505,8 @@ static void __init arch_counter_register(unsigned type)
 	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
 	cyclecounter.mult = clocksource_counter.mult;
 	cyclecounter.shift = clocksource_counter.shift;
-	timecounter_init(&timecounter, &cyclecounter, start_count);
+	timecounter_init(&arch_timer_kvm_info.timecounter,
+			 &cyclecounter, start_count);
 
 	/* 56 bits minimum, so we assume worst case rollover */
 	sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 25d0914..9101ed6b 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -49,11 +49,16 @@ enum arch_timer_reg {
 
 #define ARCH_TIMER_EVT_STREAM_FREQ	10000	/* 100us */
 
+struct arch_timer_kvm_info {
+	struct timecounter timecounter;
+};
+
 #ifdef CONFIG_ARM_ARCH_TIMER
 
 extern u32 arch_timer_get_rate(void);
 extern u64 (*arch_timer_read_counter)(void);
 extern struct timecounter *arch_timer_get_timecounter(void);
+extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
 
 #else
 
-- 
1.9.1

[PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Julien Grall]

Introduce a structure which are filled up by the arch timer driver and
used by the virtual timer in KVM.

The first member of this structure will be the timecounter. More members
will be added later.

A stub for the new helper isn't introduced because KVM requires the arch
timer for both ARM64 and ARM32.

The function arch_timer_get_timecounter is kept for the time being and
will be dropped in a subsequent patch.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Christoffer's acked-by

    Changes in v3:
        - Rename the patch
        - Move the KVM changes and removal of arch_timer_get_timecounter
        in separate patches.
---
 drivers/clocksource/arm_arch_timer.c | 12 +++++++++---
 include/clocksource/arm_arch_timer.h |  5 +++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 5152b38..62bdfe7 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -468,11 +468,16 @@ static struct cyclecounter cyclecounter = {
 	.mask	= CLOCKSOURCE_MASK(56),
 };
 
-static struct timecounter timecounter;
+static struct arch_timer_kvm_info arch_timer_kvm_info;
+
+struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
+{
+	return &arch_timer_kvm_info;
+}
 
 struct timecounter *arch_timer_get_timecounter(void)
 {
-	return &timecounter;
+	return &arch_timer_kvm_info.timecounter;
 }
 
 static void __init arch_counter_register(unsigned type)
@@ -500,7 +505,8 @@ static void __init arch_counter_register(unsigned type)
 	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
 	cyclecounter.mult = clocksource_counter.mult;
 	cyclecounter.shift = clocksource_counter.shift;
-	timecounter_init(&timecounter, &cyclecounter, start_count);
+	timecounter_init(&arch_timer_kvm_info.timecounter,
+			 &cyclecounter, start_count);
 
 	/* 56 bits minimum, so we assume worst case rollover */
 	sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 25d0914..9101ed6b 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -49,11 +49,16 @@ enum arch_timer_reg {
 
 #define ARCH_TIMER_EVT_STREAM_FREQ	10000	/* 100us */
 
+struct arch_timer_kvm_info {
+	struct timecounter timecounter;
+};
+
 #ifdef CONFIG_ARM_ARCH_TIMER
 
 extern u32 arch_timer_get_rate(void);
 extern u64 (*arch_timer_read_counter)(void);
 extern struct timecounter *arch_timer_get_timecounter(void);
+extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
 
 #else
 
-- 
1.9.1

[PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Julien Grall]

Introduce a structure which are filled up by the arch timer driver and
used by the virtual timer in KVM.

The first member of this structure will be the timecounter. More members
will be added later.

A stub for the new helper isn't introduced because KVM requires the arch
timer for both ARM64 and ARM32.

The function arch_timer_get_timecounter is kept for the time being and
will be dropped in a subsequent patch.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Christoffer's acked-by

    Changes in v3:
        - Rename the patch
        - Move the KVM changes and removal of arch_timer_get_timecounter
        in separate patches.
---
 drivers/clocksource/arm_arch_timer.c | 12 +++++++++---
 include/clocksource/arm_arch_timer.h |  5 +++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 5152b38..62bdfe7 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -468,11 +468,16 @@ static struct cyclecounter cyclecounter = {
 	.mask	= CLOCKSOURCE_MASK(56),
 };
 
-static struct timecounter timecounter;
+static struct arch_timer_kvm_info arch_timer_kvm_info;
+
+struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
+{
+	return &arch_timer_kvm_info;
+}
 
 struct timecounter *arch_timer_get_timecounter(void)
 {
-	return &timecounter;
+	return &arch_timer_kvm_info.timecounter;
 }
 
 static void __init arch_counter_register(unsigned type)
@@ -500,7 +505,8 @@ static void __init arch_counter_register(unsigned type)
 	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
 	cyclecounter.mult = clocksource_counter.mult;
 	cyclecounter.shift = clocksource_counter.shift;
-	timecounter_init(&timecounter, &cyclecounter, start_count);
+	timecounter_init(&arch_timer_kvm_info.timecounter,
+			 &cyclecounter, start_count);
 
 	/* 56 bits minimum, so we assume worst case rollover */
 	sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 25d0914..9101ed6b 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -49,11 +49,16 @@ enum arch_timer_reg {
 
 #define ARCH_TIMER_EVT_STREAM_FREQ	10000	/* 100us */
 
+struct arch_timer_kvm_info {
+	struct timecounter timecounter;
+};
+
 #ifdef CONFIG_ARM_ARCH_TIMER
 
 extern u32 arch_timer_get_rate(void);
 extern u64 (*arch_timer_read_counter)(void);
 extern struct timecounter *arch_timer_get_timecounter(void);
+extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
 
 #else
 
-- 
1.9.1

[PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Julien Grall]

Currently, the firmware table is parsed by the virtual timer code in
order to retrieve the virtual timer interrupt. However, this is already
done by the arch timer driver.

To avoid code duplication, extend arch_timer_kvm_info to get the virtual
IRQ.

Note that the KVM code will be modified in a subsequent patch.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Christoffer's acked-by

    Changes in v4:
        - Move the initialization of the virtual_irq into
        arch_timer_init as KVM mandates the system registers timer.

    Changes in v3:
        - Move the KVM changes into a separate patch and rename the patch
        - Move the initialization of the virtual_irq into
        arch_timer_common_init
---
 drivers/clocksource/arm_arch_timer.c | 2 ++
 include/clocksource/arm_arch_timer.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 62bdfe7..bb58224 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -750,6 +750,8 @@ static void __init arch_timer_init(void)
 
 	arch_timer_register();
 	arch_timer_common_init();
+
+	arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI];
 }
 
 static void __init arch_timer_of_init(struct device_node *np)
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 9101ed6b..9dd996a 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -51,6 +51,7 @@ enum arch_timer_reg {
 
 struct arch_timer_kvm_info {
 	struct timecounter timecounter;
+	int virtual_irq;
 };
 
 #ifdef CONFIG_ARM_ARCH_TIMER
-- 
1.9.1

[PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Julien Grall]

Currently, the firmware table is parsed by the virtual timer code in
order to retrieve the virtual timer interrupt. However, this is already
done by the arch timer driver.

To avoid code duplication, extend arch_timer_kvm_info to get the virtual
IRQ.

Note that the KVM code will be modified in a subsequent patch.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Christoffer's acked-by

    Changes in v4:
        - Move the initialization of the virtual_irq into
        arch_timer_init as KVM mandates the system registers timer.

    Changes in v3:
        - Move the KVM changes into a separate patch and rename the patch
        - Move the initialization of the virtual_irq into
        arch_timer_common_init
---
 drivers/clocksource/arm_arch_timer.c | 2 ++
 include/clocksource/arm_arch_timer.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 62bdfe7..bb58224 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -750,6 +750,8 @@ static void __init arch_timer_init(void)
 
 	arch_timer_register();
 	arch_timer_common_init();
+
+	arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI];
 }
 
 static void __init arch_timer_of_init(struct device_node *np)
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 9101ed6b..9dd996a 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -51,6 +51,7 @@ enum arch_timer_reg {
 
 struct arch_timer_kvm_info {
 	struct timecounter timecounter;
+	int virtual_irq;
 };
 
 #ifdef CONFIG_ARM_ARCH_TIMER
-- 
1.9.1

[PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Julien Grall]

Currently, the firmware table is parsed by the virtual timer code in
order to retrieve the virtual timer interrupt. However, this is already
done by the arch timer driver.

To avoid code duplication, extend arch_timer_kvm_info to get the virtual
IRQ.

Note that the KVM code will be modified in a subsequent patch.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Christoffer's acked-by

    Changes in v4:
        - Move the initialization of the virtual_irq into
        arch_timer_init as KVM mandates the system registers timer.

    Changes in v3:
        - Move the KVM changes into a separate patch and rename the patch
        - Move the initialization of the virtual_irq into
        arch_timer_common_init
---
 drivers/clocksource/arm_arch_timer.c | 2 ++
 include/clocksource/arm_arch_timer.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 62bdfe7..bb58224 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -750,6 +750,8 @@ static void __init arch_timer_init(void)
 
 	arch_timer_register();
 	arch_timer_common_init();
+
+	arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI];
 }
 
 static void __init arch_timer_of_init(struct device_node *np)
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 9101ed6b..9dd996a 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -51,6 +51,7 @@ enum arch_timer_reg {
 
 struct arch_timer_kvm_info {
 	struct timecounter timecounter;
+	int virtual_irq;
 };
 
 #ifdef CONFIG_ARM_ARCH_TIMER
-- 
1.9.1

[PATCH v6 03/10] irqchip/gic-v2: Gather ACPI specific data in a single structure

[Julien Grall]

The ACPI code requires to use global variables in order to collect
information from the tables.

For now, a single global variable is used, but more will be added in a
subsequent patch. To make clear they are ACPI specific, gather all the
information in a single structure.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christofer Dall <christoffer.dall@linaro.org>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Hanjun's acked-by

    Changes in v4:
        - Update commit message
        - Rename cpu_phy_base to cpu_phys_base
        - Add Christopher's acked-by

    Changes in v2:
        - Patch added
---
 drivers/irqchip/irq-gic.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 282344b..7a73786 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -1245,7 +1245,10 @@ IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
 #endif
 
 #ifdef CONFIG_ACPI
-static phys_addr_t cpu_phy_base __initdata;
+static struct
+{
+	phys_addr_t cpu_phys_base;
+} acpi_data __initdata;
 
 static int __init
 gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
@@ -1265,10 +1268,10 @@ gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
 	 * All CPU interface addresses have to be the same.
 	 */
 	gic_cpu_base = processor->base_address;
-	if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
+	if (cpu_base_assigned && gic_cpu_base != acpi_data.cpu_phys_base)
 		return -EINVAL;
 
-	cpu_phy_base = gic_cpu_base;
+	acpi_data.cpu_phys_base = gic_cpu_base;
 	cpu_base_assigned = 1;
 	return 0;
 }
@@ -1316,7 +1319,7 @@ static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 		return -EINVAL;
 	}
 
-	cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
+	cpu_base = ioremap(acpi_data.cpu_phys_base, ACPI_GIC_CPU_IF_MEM_SIZE);
 	if (!cpu_base) {
 		pr_err("Unable to map GICC registers\n");
 		return -ENOMEM;
-- 
1.9.1

[PATCH v6 03/10] irqchip/gic-v2: Gather ACPI specific data in a single structure

[Julien Grall]

The ACPI code requires to use global variables in order to collect
information from the tables.

For now, a single global variable is used, but more will be added in a
subsequent patch. To make clear they are ACPI specific, gather all the
information in a single structure.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christofer Dall <christoffer.dall@linaro.org>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Hanjun's acked-by

    Changes in v4:
        - Update commit message
        - Rename cpu_phy_base to cpu_phys_base
        - Add Christopher's acked-by

    Changes in v2:
        - Patch added
---
 drivers/irqchip/irq-gic.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 282344b..7a73786 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -1245,7 +1245,10 @@ IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
 #endif
 
 #ifdef CONFIG_ACPI
-static phys_addr_t cpu_phy_base __initdata;
+static struct
+{
+	phys_addr_t cpu_phys_base;
+} acpi_data __initdata;
 
 static int __init
 gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
@@ -1265,10 +1268,10 @@ gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
 	 * All CPU interface addresses have to be the same.
 	 */
 	gic_cpu_base = processor->base_address;
-	if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
+	if (cpu_base_assigned && gic_cpu_base != acpi_data.cpu_phys_base)
 		return -EINVAL;
 
-	cpu_phy_base = gic_cpu_base;
+	acpi_data.cpu_phys_base = gic_cpu_base;
 	cpu_base_assigned = 1;
 	return 0;
 }
@@ -1316,7 +1319,7 @@ static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 		return -EINVAL;
 	}
 
-	cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
+	cpu_base = ioremap(acpi_data.cpu_phys_base, ACPI_GIC_CPU_IF_MEM_SIZE);
 	if (!cpu_base) {
 		pr_err("Unable to map GICC registers\n");
 		return -ENOMEM;
-- 
1.9.1

[PATCH v6 03/10] irqchip/gic-v2: Gather ACPI specific data in a single structure

[Julien Grall]

The ACPI code requires to use global variables in order to collect
information from the tables.

For now, a single global variable is used, but more will be added in a
subsequent patch. To make clear they are ACPI specific, gather all the
information in a single structure.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christofer Dall <christoffer.dall@linaro.org>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Add Hanjun's acked-by

    Changes in v4:
        - Update commit message
        - Rename cpu_phy_base to cpu_phys_base
        - Add Christopher's acked-by

    Changes in v2:
        - Patch added
---
 drivers/irqchip/irq-gic.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 282344b..7a73786 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -1245,7 +1245,10 @@ IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
 #endif
 
 #ifdef CONFIG_ACPI
-static phys_addr_t cpu_phy_base __initdata;
+static struct
+{
+	phys_addr_t cpu_phys_base;
+} acpi_data __initdata;
 
 static int __init
 gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
@@ -1265,10 +1268,10 @@ gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
 	 * All CPU interface addresses have to be the same.
 	 */
 	gic_cpu_base = processor->base_address;
-	if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
+	if (cpu_base_assigned && gic_cpu_base != acpi_data.cpu_phys_base)
 		return -EINVAL;
 
-	cpu_phy_base = gic_cpu_base;
+	acpi_data.cpu_phys_base = gic_cpu_base;
 	cpu_base_assigned = 1;
 	return 0;
 }
@@ -1316,7 +1319,7 @@ static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 		return -EINVAL;
 	}
 
-	cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
+	cpu_base = ioremap(acpi_data.cpu_phys_base, ACPI_GIC_CPU_IF_MEM_SIZE);
 	if (!cpu_base) {
 		pr_err("Unable to map GICC registers\n");
 		return -ENOMEM;
-- 
1.9.1

[PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Julien Grall]

For now, the firmware tables are parsed 2 times: once in the GIC
drivers, the other timer when initializing the vGIC. It means code
duplication and make more tedious to add the support for another
firmware table (like ACPI).

Introduce a new structure and set of helpers to get/set the virtual GIC
information. Also fill up the structure for GICv2.

Signed-off-by: Julien Grall <julien.grall@arm.com>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Move the code to get the maintenance interrupt later. It will
        avoid to call acpi_unregister_gsi when the function fails.

    Changes in v4:
        - Change the flow to call gic_set_kvm_info when all the
        information are present.
        - Rework comments in arm-gic-common.h
        - Replace WARN_ON with BUG_ON in gic_set_kvm_info

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl
---
 drivers/irqchip/irq-gic-common.c       | 13 ++++++
 drivers/irqchip/irq-gic-common.h       |  3 ++
 drivers/irqchip/irq-gic.c              | 76 +++++++++++++++++++++++++++++++++-
 include/linux/irqchip/arm-gic-common.h | 33 +++++++++++++++
 4 files changed, 124 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/irqchip/arm-gic-common.h

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index f174ce0..2e9443b 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -21,6 +21,19 @@
 
 #include "irq-gic-common.h"
 
+static const struct gic_kvm_info *gic_kvm_info;
+
+const struct gic_kvm_info *gic_get_kvm_info(void)
+{
+	return gic_kvm_info;
+}
+
+void gic_set_kvm_info(const struct gic_kvm_info *info)
+{
+	BUG_ON(gic_kvm_info != NULL);
+	gic_kvm_info = info;
+}
+
 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data)
 {
diff --git a/drivers/irqchip/irq-gic-common.h b/drivers/irqchip/irq-gic-common.h
index fff697d..205e5fd 100644
--- a/drivers/irqchip/irq-gic-common.h
+++ b/drivers/irqchip/irq-gic-common.h
@@ -19,6 +19,7 @@
 
 #include <linux/of.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 struct gic_quirk {
 	const char *desc;
@@ -35,4 +36,6 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data);
 
+void gic_set_kvm_info(const struct gic_kvm_info *info);
+
 #endif /* _IRQ_GIC_COMMON_H */
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 7a73786..3f1d9fd 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -102,6 +102,8 @@ static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
 
 static struct gic_chip_data gic_data[CONFIG_ARM_GIC_MAX_NR] __read_mostly;
 
+static struct gic_kvm_info gic_v2_kvm_info;
+
 #ifdef CONFIG_GIC_NON_BANKED
 static void __iomem *gic_get_percpu_base(union gic_base *base)
 {
@@ -1189,6 +1191,29 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base)
 	return true;
 }
 
+static void __init gic_of_setup_kvm_info(struct device_node *node)
+{
+	int ret;
+	struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
+	struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
+
+	gic_v2_kvm_info.type = GIC_V2;
+
+	gic_v2_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
+	if (!gic_v2_kvm_info.maint_irq)
+		return;
+
+	ret = of_address_to_resource(node, 2, vctrl_res);
+	if (ret)
+		return;
+
+	ret = of_address_to_resource(node, 3, vcpu_res);
+	if (ret)
+		return;
+
+	gic_set_kvm_info(&gic_v2_kvm_info);
+}
+
 int __init
 gic_of_init(struct device_node *node, struct device_node *parent)
 {
@@ -1218,8 +1243,10 @@ gic_of_init(struct device_node *node, struct device_node *parent)
 
 	__gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset,
 			 &node->fwnode);
-	if (!gic_cnt)
+	if (!gic_cnt) {
 		gic_init_physaddr(node);
+		gic_of_setup_kvm_info(node);
+	}
 
 	if (parent) {
 		irq = irq_of_parse_and_map(node, 0);
@@ -1248,6 +1275,10 @@ IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
 static struct
 {
 	phys_addr_t cpu_phys_base;
+	u32 maint_irq;
+	int maint_irq_mode;
+	phys_addr_t vctrl_base;
+	phys_addr_t vcpu_base;
 } acpi_data __initdata;
 
 static int __init
@@ -1272,6 +1303,12 @@ gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
 		return -EINVAL;
 
 	acpi_data.cpu_phys_base = gic_cpu_base;
+	acpi_data.maint_irq = processor->vgic_interrupt;
+	acpi_data.maint_irq_mode = (processor->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
+				    ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+	acpi_data.vctrl_base = processor->gich_base_address;
+	acpi_data.vcpu_base = processor->gicv_base_address;
+
 	cpu_base_assigned = 1;
 	return 0;
 }
@@ -1302,6 +1339,41 @@ static bool __init gic_validate_dist(struct acpi_subtable_header *header,
 
 #define ACPI_GICV2_DIST_MEM_SIZE	(SZ_4K)
 #define ACPI_GIC_CPU_IF_MEM_SIZE	(SZ_8K)
+#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
+#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
+
+static void __init gic_acpi_setup_kvm_info(void)
+{
+	int irq;
+	struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
+	struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
+
+	gic_v2_kvm_info.type = GIC_V2;
+
+	if (!acpi_data.vctrl_base)
+		return;
+
+	vctrl_res->flags = IORESOURCE_MEM;
+	vctrl_res->start = acpi_data.vctrl_base;
+	vctrl_res->end = vctrl_res->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
+
+	if (!acpi_data.vcpu_base)
+		return;
+
+	vcpu_res->flags = IORESOURCE_MEM;
+	vcpu_res->start = acpi_data.vcpu_base;
+	vcpu_res->end = vcpu_res->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
+
+	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
+				acpi_data.maint_irq_mode,
+				ACPI_ACTIVE_HIGH);
+	if (irq <= 0)
+		return;
+
+	gic_v2_kvm_info.maint_irq = irq;
+
+	gic_set_kvm_info(&gic_v2_kvm_info);
+}
 
 static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 				   const unsigned long end)
@@ -1359,6 +1431,8 @@ static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 	if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
 		gicv2m_init(NULL, gic_data[0].domain);
 
+	gic_acpi_setup_kvm_info();
+
 	return 0;
 }
 IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
new file mode 100644
index 0000000..ef34f6f
--- /dev/null
+++ b/include/linux/irqchip/arm-gic-common.h
@@ -0,0 +1,33 @@
+/*
+ * include/linux/irqchip/arm-gic-common.h
+ *
+ * Copyright (C) 2016 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_IRQCHIP_ARM_GIC_COMMON_H
+#define __LINUX_IRQCHIP_ARM_GIC_COMMON_H
+
+#include <linux/types.h>
+#include <linux/ioport.h>
+
+enum gic_type {
+	GIC_V2,
+};
+
+struct gic_kvm_info {
+	/* GIC type */
+	enum gic_type	type;
+	/* Virtual CPU interface */
+	struct resource vcpu;
+	/* Interrupt number */
+	unsigned int	maint_irq;
+	/* Virtual control interface */
+	struct resource vctrl;
+};
+
+const struct gic_kvm_info *gic_get_kvm_info(void);
+
+#endif /* __LINUX_IRQCHIP_ARM_GIC_COMMON_H */
-- 
1.9.1

[PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Julien Grall]

For now, the firmware tables are parsed 2 times: once in the GIC
drivers, the other timer when initializing the vGIC. It means code
duplication and make more tedious to add the support for another
firmware table (like ACPI).

Introduce a new structure and set of helpers to get/set the virtual GIC
information. Also fill up the structure for GICv2.

Signed-off-by: Julien Grall <julien.grall@arm.com>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Move the code to get the maintenance interrupt later. It will
        avoid to call acpi_unregister_gsi when the function fails.

    Changes in v4:
        - Change the flow to call gic_set_kvm_info when all the
        information are present.
        - Rework comments in arm-gic-common.h
        - Replace WARN_ON with BUG_ON in gic_set_kvm_info

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl
---
 drivers/irqchip/irq-gic-common.c       | 13 ++++++
 drivers/irqchip/irq-gic-common.h       |  3 ++
 drivers/irqchip/irq-gic.c              | 76 +++++++++++++++++++++++++++++++++-
 include/linux/irqchip/arm-gic-common.h | 33 +++++++++++++++
 4 files changed, 124 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/irqchip/arm-gic-common.h

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index f174ce0..2e9443b 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -21,6 +21,19 @@
 
 #include "irq-gic-common.h"
 
+static const struct gic_kvm_info *gic_kvm_info;
+
+const struct gic_kvm_info *gic_get_kvm_info(void)
+{
+	return gic_kvm_info;
+}
+
+void gic_set_kvm_info(const struct gic_kvm_info *info)
+{
+	BUG_ON(gic_kvm_info != NULL);
+	gic_kvm_info = info;
+}
+
 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data)
 {
diff --git a/drivers/irqchip/irq-gic-common.h b/drivers/irqchip/irq-gic-common.h
index fff697d..205e5fd 100644
--- a/drivers/irqchip/irq-gic-common.h
+++ b/drivers/irqchip/irq-gic-common.h
@@ -19,6 +19,7 @@
 
 #include <linux/of.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 struct gic_quirk {
 	const char *desc;
@@ -35,4 +36,6 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data);
 
+void gic_set_kvm_info(const struct gic_kvm_info *info);
+
 #endif /* _IRQ_GIC_COMMON_H */
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 7a73786..3f1d9fd 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -102,6 +102,8 @@ static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
 
 static struct gic_chip_data gic_data[CONFIG_ARM_GIC_MAX_NR] __read_mostly;
 
+static struct gic_kvm_info gic_v2_kvm_info;
+
 #ifdef CONFIG_GIC_NON_BANKED
 static void __iomem *gic_get_percpu_base(union gic_base *base)
 {
@@ -1189,6 +1191,29 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base)
 	return true;
 }
 
+static void __init gic_of_setup_kvm_info(struct device_node *node)
+{
+	int ret;
+	struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
+	struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
+
+	gic_v2_kvm_info.type = GIC_V2;
+
+	gic_v2_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
+	if (!gic_v2_kvm_info.maint_irq)
+		return;
+
+	ret = of_address_to_resource(node, 2, vctrl_res);
+	if (ret)
+		return;
+
+	ret = of_address_to_resource(node, 3, vcpu_res);
+	if (ret)
+		return;
+
+	gic_set_kvm_info(&gic_v2_kvm_info);
+}
+
 int __init
 gic_of_init(struct device_node *node, struct device_node *parent)
 {
@@ -1218,8 +1243,10 @@ gic_of_init(struct device_node *node, struct device_node *parent)
 
 	__gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset,
 			 &node->fwnode);
-	if (!gic_cnt)
+	if (!gic_cnt) {
 		gic_init_physaddr(node);
+		gic_of_setup_kvm_info(node);
+	}
 
 	if (parent) {
 		irq = irq_of_parse_and_map(node, 0);
@@ -1248,6 +1275,10 @@ IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
 static struct
 {
 	phys_addr_t cpu_phys_base;
+	u32 maint_irq;
+	int maint_irq_mode;
+	phys_addr_t vctrl_base;
+	phys_addr_t vcpu_base;
 } acpi_data __initdata;
 
 static int __init
@@ -1272,6 +1303,12 @@ gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
 		return -EINVAL;
 
 	acpi_data.cpu_phys_base = gic_cpu_base;
+	acpi_data.maint_irq = processor->vgic_interrupt;
+	acpi_data.maint_irq_mode = (processor->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
+				    ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+	acpi_data.vctrl_base = processor->gich_base_address;
+	acpi_data.vcpu_base = processor->gicv_base_address;
+
 	cpu_base_assigned = 1;
 	return 0;
 }
@@ -1302,6 +1339,41 @@ static bool __init gic_validate_dist(struct acpi_subtable_header *header,
 
 #define ACPI_GICV2_DIST_MEM_SIZE	(SZ_4K)
 #define ACPI_GIC_CPU_IF_MEM_SIZE	(SZ_8K)
+#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
+#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
+
+static void __init gic_acpi_setup_kvm_info(void)
+{
+	int irq;
+	struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
+	struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
+
+	gic_v2_kvm_info.type = GIC_V2;
+
+	if (!acpi_data.vctrl_base)
+		return;
+
+	vctrl_res->flags = IORESOURCE_MEM;
+	vctrl_res->start = acpi_data.vctrl_base;
+	vctrl_res->end = vctrl_res->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
+
+	if (!acpi_data.vcpu_base)
+		return;
+
+	vcpu_res->flags = IORESOURCE_MEM;
+	vcpu_res->start = acpi_data.vcpu_base;
+	vcpu_res->end = vcpu_res->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
+
+	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
+				acpi_data.maint_irq_mode,
+				ACPI_ACTIVE_HIGH);
+	if (irq <= 0)
+		return;
+
+	gic_v2_kvm_info.maint_irq = irq;
+
+	gic_set_kvm_info(&gic_v2_kvm_info);
+}
 
 static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 				   const unsigned long end)
@@ -1359,6 +1431,8 @@ static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 	if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
 		gicv2m_init(NULL, gic_data[0].domain);
 
+	gic_acpi_setup_kvm_info();
+
 	return 0;
 }
 IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
new file mode 100644
index 0000000..ef34f6f
--- /dev/null
+++ b/include/linux/irqchip/arm-gic-common.h
@@ -0,0 +1,33 @@
+/*
+ * include/linux/irqchip/arm-gic-common.h
+ *
+ * Copyright (C) 2016 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_IRQCHIP_ARM_GIC_COMMON_H
+#define __LINUX_IRQCHIP_ARM_GIC_COMMON_H
+
+#include <linux/types.h>
+#include <linux/ioport.h>
+
+enum gic_type {
+	GIC_V2,
+};
+
+struct gic_kvm_info {
+	/* GIC type */
+	enum gic_type	type;
+	/* Virtual CPU interface */
+	struct resource vcpu;
+	/* Interrupt number */
+	unsigned int	maint_irq;
+	/* Virtual control interface */
+	struct resource vctrl;
+};
+
+const struct gic_kvm_info *gic_get_kvm_info(void);
+
+#endif /* __LINUX_IRQCHIP_ARM_GIC_COMMON_H */
-- 
1.9.1

[PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Julien Grall]

For now, the firmware tables are parsed 2 times: once in the GIC
drivers, the other timer when initializing the vGIC. It means code
duplication and make more tedious to add the support for another
firmware table (like ACPI).

Introduce a new structure and set of helpers to get/set the virtual GIC
information. Also fill up the structure for GICv2.

Signed-off-by: Julien Grall <julien.grall@arm.com>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

    Changes in v6:
        - Move the code to get the maintenance interrupt later. It will
        avoid to call acpi_unregister_gsi when the function fails.

    Changes in v4:
        - Change the flow to call gic_set_kvm_info when all the
        information are present.
        - Rework comments in arm-gic-common.h
        - Replace WARN_ON with BUG_ON in gic_set_kvm_info

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl
---
 drivers/irqchip/irq-gic-common.c       | 13 ++++++
 drivers/irqchip/irq-gic-common.h       |  3 ++
 drivers/irqchip/irq-gic.c              | 76 +++++++++++++++++++++++++++++++++-
 include/linux/irqchip/arm-gic-common.h | 33 +++++++++++++++
 4 files changed, 124 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/irqchip/arm-gic-common.h

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index f174ce0..2e9443b 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -21,6 +21,19 @@
 
 #include "irq-gic-common.h"
 
+static const struct gic_kvm_info *gic_kvm_info;
+
+const struct gic_kvm_info *gic_get_kvm_info(void)
+{
+	return gic_kvm_info;
+}
+
+void gic_set_kvm_info(const struct gic_kvm_info *info)
+{
+	BUG_ON(gic_kvm_info != NULL);
+	gic_kvm_info = info;
+}
+
 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data)
 {
diff --git a/drivers/irqchip/irq-gic-common.h b/drivers/irqchip/irq-gic-common.h
index fff697d..205e5fd 100644
--- a/drivers/irqchip/irq-gic-common.h
+++ b/drivers/irqchip/irq-gic-common.h
@@ -19,6 +19,7 @@
 
 #include <linux/of.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 struct gic_quirk {
 	const char *desc;
@@ -35,4 +36,6 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data);
 
+void gic_set_kvm_info(const struct gic_kvm_info *info);
+
 #endif /* _IRQ_GIC_COMMON_H */
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 7a73786..3f1d9fd 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -102,6 +102,8 @@ static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
 
 static struct gic_chip_data gic_data[CONFIG_ARM_GIC_MAX_NR] __read_mostly;
 
+static struct gic_kvm_info gic_v2_kvm_info;
+
 #ifdef CONFIG_GIC_NON_BANKED
 static void __iomem *gic_get_percpu_base(union gic_base *base)
 {
@@ -1189,6 +1191,29 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base)
 	return true;
 }
 
+static void __init gic_of_setup_kvm_info(struct device_node *node)
+{
+	int ret;
+	struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
+	struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
+
+	gic_v2_kvm_info.type = GIC_V2;
+
+	gic_v2_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
+	if (!gic_v2_kvm_info.maint_irq)
+		return;
+
+	ret = of_address_to_resource(node, 2, vctrl_res);
+	if (ret)
+		return;
+
+	ret = of_address_to_resource(node, 3, vcpu_res);
+	if (ret)
+		return;
+
+	gic_set_kvm_info(&gic_v2_kvm_info);
+}
+
 int __init
 gic_of_init(struct device_node *node, struct device_node *parent)
 {
@@ -1218,8 +1243,10 @@ gic_of_init(struct device_node *node, struct device_node *parent)
 
 	__gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset,
 			 &node->fwnode);
-	if (!gic_cnt)
+	if (!gic_cnt) {
 		gic_init_physaddr(node);
+		gic_of_setup_kvm_info(node);
+	}
 
 	if (parent) {
 		irq = irq_of_parse_and_map(node, 0);
@@ -1248,6 +1275,10 @@ IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
 static struct
 {
 	phys_addr_t cpu_phys_base;
+	u32 maint_irq;
+	int maint_irq_mode;
+	phys_addr_t vctrl_base;
+	phys_addr_t vcpu_base;
 } acpi_data __initdata;
 
 static int __init
@@ -1272,6 +1303,12 @@ gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
 		return -EINVAL;
 
 	acpi_data.cpu_phys_base = gic_cpu_base;
+	acpi_data.maint_irq = processor->vgic_interrupt;
+	acpi_data.maint_irq_mode = (processor->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
+				    ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+	acpi_data.vctrl_base = processor->gich_base_address;
+	acpi_data.vcpu_base = processor->gicv_base_address;
+
 	cpu_base_assigned = 1;
 	return 0;
 }
@@ -1302,6 +1339,41 @@ static bool __init gic_validate_dist(struct acpi_subtable_header *header,
 
 #define ACPI_GICV2_DIST_MEM_SIZE	(SZ_4K)
 #define ACPI_GIC_CPU_IF_MEM_SIZE	(SZ_8K)
+#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
+#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
+
+static void __init gic_acpi_setup_kvm_info(void)
+{
+	int irq;
+	struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
+	struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
+
+	gic_v2_kvm_info.type = GIC_V2;
+
+	if (!acpi_data.vctrl_base)
+		return;
+
+	vctrl_res->flags = IORESOURCE_MEM;
+	vctrl_res->start = acpi_data.vctrl_base;
+	vctrl_res->end = vctrl_res->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
+
+	if (!acpi_data.vcpu_base)
+		return;
+
+	vcpu_res->flags = IORESOURCE_MEM;
+	vcpu_res->start = acpi_data.vcpu_base;
+	vcpu_res->end = vcpu_res->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
+
+	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
+				acpi_data.maint_irq_mode,
+				ACPI_ACTIVE_HIGH);
+	if (irq <= 0)
+		return;
+
+	gic_v2_kvm_info.maint_irq = irq;
+
+	gic_set_kvm_info(&gic_v2_kvm_info);
+}
 
 static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 				   const unsigned long end)
@@ -1359,6 +1431,8 @@ static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
 	if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
 		gicv2m_init(NULL, gic_data[0].domain);
 
+	gic_acpi_setup_kvm_info();
+
 	return 0;
 }
 IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
new file mode 100644
index 0000000..ef34f6f
--- /dev/null
+++ b/include/linux/irqchip/arm-gic-common.h
@@ -0,0 +1,33 @@
+/*
+ * include/linux/irqchip/arm-gic-common.h
+ *
+ * Copyright (C) 2016 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_IRQCHIP_ARM_GIC_COMMON_H
+#define __LINUX_IRQCHIP_ARM_GIC_COMMON_H
+
+#include <linux/types.h>
+#include <linux/ioport.h>
+
+enum gic_type {
+	GIC_V2,
+};
+
+struct gic_kvm_info {
+	/* GIC type */
+	enum gic_type	type;
+	/* Virtual CPU interface */
+	struct resource vcpu;
+	/* Interrupt number */
+	unsigned int	maint_irq;
+	/* Virtual control interface */
+	struct resource vctrl;
+};
+
+const struct gic_kvm_info *gic_get_kvm_info(void);
+
+#endif /* __LINUX_IRQCHIP_ARM_GIC_COMMON_H */
-- 
1.9.1

[PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Julien Grall]

Currently, most of the pr_* messages in the GICv3 driver don't have a
prefix.  Add one to make clear where the messages come from.

Signed-off-by: Julien Grall <julien.grall@arm.com>

---
    Changes in v6:
        - Patch added
---
 drivers/irqchip/irq-gic-v3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 5b7d3c2..6dc6f03 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -15,6 +15,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#define pr_fmt(fmt)	"GICv3: " fmt
+
 #include <linux/acpi.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
-- 
1.9.1

[PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Julien Grall]

Currently, most of the pr_* messages in the GICv3 driver don't have a
prefix.  Add one to make clear where the messages come from.

Signed-off-by: Julien Grall <julien.grall@arm.com>

---
    Changes in v6:
        - Patch added
---
 drivers/irqchip/irq-gic-v3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 5b7d3c2..6dc6f03 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -15,6 +15,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#define pr_fmt(fmt)	"GICv3: " fmt
+
 #include <linux/acpi.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
-- 
1.9.1

[PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Julien Grall]

Currently, most of the pr_* messages in the GICv3 driver don't have a
prefix.  Add one to make clear where the messages come from.

Signed-off-by: Julien Grall <julien.grall@arm.com>

---
    Changes in v6:
        - Patch added
---
 drivers/irqchip/irq-gic-v3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 5b7d3c2..6dc6f03 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -15,6 +15,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#define pr_fmt(fmt)	"GICv3: " fmt
+
 #include <linux/acpi.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
-- 
1.9.1

[PATCH v6 06/10] irqchip/gic-v3: Gather all ACPI specific data in a single structure

[Julien Grall]

The ACPI code requires to use global variables in order to collect
information from the tables.

To make clear those variables are ACPI specific, gather all of them in a
single structure.

Furthermore, even if some of the variables are not marked with
__initdata, they are all only used during the initialization. Therefore,
the new variable, which hold the structure, can be marked with
__initdata.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>

    Changes in v6:
        - Add Christoffer's acked-by
        - Add Hanjun's reviewed-by
        - Fix typo in the commit message

    Changes in v4:
        - Rework commit message

    Changes in v3:
        - Patch added
---
 drivers/irqchip/irq-gic-v3.c | 60 ++++++++++++++++++++++++--------------------
 1 file changed, 33 insertions(+), 27 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6dc6f03..6a9f5ff 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -970,19 +970,22 @@ out_unmap_dist:
 IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init);
 
 #ifdef CONFIG_ACPI
-static void __iomem *dist_base;
-static struct redist_region *redist_regs __initdata;
-static u32 nr_redist_regions __initdata;
-static bool single_redist;
+static struct
+{
+	void __iomem *dist_base;
+	struct redist_region *redist_regs;
+	u32 nr_redist_regions;
+	bool single_redist;
+} acpi_data __initdata;
 
 static void __init
 gic_acpi_register_redist(phys_addr_t phys_base, void __iomem *redist_base)
 {
 	static int count = 0;
 
-	redist_regs[count].phys_base = phys_base;
-	redist_regs[count].redist_base = redist_base;
-	redist_regs[count].single_redist = single_redist;
+	acpi_data.redist_regs[count].phys_base = phys_base;
+	acpi_data.redist_regs[count].redist_base = redist_base;
+	acpi_data.redist_regs[count].single_redist = acpi_data.single_redist;
 	count++;
 }
 
@@ -1010,7 +1013,7 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
 {
 	struct acpi_madt_generic_interrupt *gicc =
 				(struct acpi_madt_generic_interrupt *)header;
-	u32 reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
+	u32 reg = readl_relaxed(acpi_data.dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
 	u32 size = reg == GIC_PIDR2_ARCH_GICv4 ? SZ_64K * 4 : SZ_64K * 2;
 	void __iomem *redist_base;
 
@@ -1027,7 +1030,7 @@ static int __init gic_acpi_collect_gicr_base(void)
 	acpi_tbl_entry_handler redist_parser;
 	enum acpi_madt_type type;
 
-	if (single_redist) {
+	if (acpi_data.single_redist) {
 		type = ACPI_MADT_TYPE_GENERIC_INTERRUPT;
 		redist_parser = gic_acpi_parse_madt_gicc;
 	} else {
@@ -1078,14 +1081,14 @@ static int __init gic_acpi_count_gicr_regions(void)
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
 				      gic_acpi_match_gicr, 0);
 	if (count > 0) {
-		single_redist = false;
+		acpi_data.single_redist = false;
 		return count;
 	}
 
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
 				      gic_acpi_match_gicc, 0);
 	if (count > 0)
-		single_redist = true;
+		acpi_data.single_redist = true;
 
 	return count;
 }
@@ -1105,7 +1108,7 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 	if (count <= 0)
 		return false;
 
-	nr_redist_regions = count;
+	acpi_data.nr_redist_regions = count;
 	return true;
 }
 
@@ -1116,25 +1119,28 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 {
 	struct acpi_madt_generic_distributor *dist;
 	struct fwnode_handle *domain_handle;
+	size_t size;
 	int i, err;
 
 	/* Get distributor base address */
 	dist = (struct acpi_madt_generic_distributor *)header;
-	dist_base = ioremap(dist->base_address, ACPI_GICV3_DIST_MEM_SIZE);
-	if (!dist_base) {
+	acpi_data.dist_base = ioremap(dist->base_address,
+				      ACPI_GICV3_DIST_MEM_SIZE);
+	if (!acpi_data.dist_base) {
 		pr_err("Unable to map GICD registers\n");
 		return -ENOMEM;
 	}
 
-	err = gic_validate_dist_version(dist_base);
+	err = gic_validate_dist_version(acpi_data.dist_base);
 	if (err) {
-		pr_err("No distributor detected at @%p, giving up", dist_base);
+		pr_err("No distributor detected at @%p, giving up",
+		       acpi_data.dist_base);
 		goto out_dist_unmap;
 	}
 
-	redist_regs = kzalloc(sizeof(*redist_regs) * nr_redist_regions,
-			      GFP_KERNEL);
-	if (!redist_regs) {
+	size = sizeof(*acpi_data.redist_regs) * acpi_data.nr_redist_regions;
+	acpi_data.redist_regs = kzalloc(size, GFP_KERNEL);
+	if (!acpi_data.redist_regs) {
 		err = -ENOMEM;
 		goto out_dist_unmap;
 	}
@@ -1143,14 +1149,14 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 	if (err)
 		goto out_redist_unmap;
 
-	domain_handle = irq_domain_alloc_fwnode(dist_base);
+	domain_handle = irq_domain_alloc_fwnode(acpi_data.dist_base);
 	if (!domain_handle) {
 		err = -ENOMEM;
 		goto out_redist_unmap;
 	}
 
-	err = gic_init_bases(dist_base, redist_regs, nr_redist_regions, 0,
-			     domain_handle);
+	err = gic_init_bases(acpi_data.dist_base, acpi_data.redist_regs,
+			     acpi_data.nr_redist_regions, 0, domain_handle);
 	if (err)
 		goto out_fwhandle_free;
 
@@ -1160,12 +1166,12 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 out_fwhandle_free:
 	irq_domain_free_fwnode(domain_handle);
 out_redist_unmap:
-	for (i = 0; i < nr_redist_regions; i++)
-		if (redist_regs[i].redist_base)
-			iounmap(redist_regs[i].redist_base);
-	kfree(redist_regs);
+	for (i = 0; i < acpi_data.nr_redist_regions; i++)
+		if (acpi_data.redist_regs[i].redist_base)
+			iounmap(acpi_data.redist_regs[i].redist_base);
+	kfree(acpi_data.redist_regs);
 out_dist_unmap:
-	iounmap(dist_base);
+	iounmap(acpi_data.dist_base);
 	return err;
 }
 IRQCHIP_ACPI_DECLARE(gic_v3, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
-- 
1.9.1

[PATCH v6 06/10] irqchip/gic-v3: Gather all ACPI specific data in a single structure

[Julien Grall]

The ACPI code requires to use global variables in order to collect
information from the tables.

To make clear those variables are ACPI specific, gather all of them in a
single structure.

Furthermore, even if some of the variables are not marked with
__initdata, they are all only used during the initialization. Therefore,
the new variable, which hold the structure, can be marked with
__initdata.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>

    Changes in v6:
        - Add Christoffer's acked-by
        - Add Hanjun's reviewed-by
        - Fix typo in the commit message

    Changes in v4:
        - Rework commit message

    Changes in v3:
        - Patch added
---
 drivers/irqchip/irq-gic-v3.c | 60 ++++++++++++++++++++++++--------------------
 1 file changed, 33 insertions(+), 27 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6dc6f03..6a9f5ff 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -970,19 +970,22 @@ out_unmap_dist:
 IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init);
 
 #ifdef CONFIG_ACPI
-static void __iomem *dist_base;
-static struct redist_region *redist_regs __initdata;
-static u32 nr_redist_regions __initdata;
-static bool single_redist;
+static struct
+{
+	void __iomem *dist_base;
+	struct redist_region *redist_regs;
+	u32 nr_redist_regions;
+	bool single_redist;
+} acpi_data __initdata;
 
 static void __init
 gic_acpi_register_redist(phys_addr_t phys_base, void __iomem *redist_base)
 {
 	static int count = 0;
 
-	redist_regs[count].phys_base = phys_base;
-	redist_regs[count].redist_base = redist_base;
-	redist_regs[count].single_redist = single_redist;
+	acpi_data.redist_regs[count].phys_base = phys_base;
+	acpi_data.redist_regs[count].redist_base = redist_base;
+	acpi_data.redist_regs[count].single_redist = acpi_data.single_redist;
 	count++;
 }
 
@@ -1010,7 +1013,7 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
 {
 	struct acpi_madt_generic_interrupt *gicc =
 				(struct acpi_madt_generic_interrupt *)header;
-	u32 reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
+	u32 reg = readl_relaxed(acpi_data.dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
 	u32 size = reg == GIC_PIDR2_ARCH_GICv4 ? SZ_64K * 4 : SZ_64K * 2;
 	void __iomem *redist_base;
 
@@ -1027,7 +1030,7 @@ static int __init gic_acpi_collect_gicr_base(void)
 	acpi_tbl_entry_handler redist_parser;
 	enum acpi_madt_type type;
 
-	if (single_redist) {
+	if (acpi_data.single_redist) {
 		type = ACPI_MADT_TYPE_GENERIC_INTERRUPT;
 		redist_parser = gic_acpi_parse_madt_gicc;
 	} else {
@@ -1078,14 +1081,14 @@ static int __init gic_acpi_count_gicr_regions(void)
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
 				      gic_acpi_match_gicr, 0);
 	if (count > 0) {
-		single_redist = false;
+		acpi_data.single_redist = false;
 		return count;
 	}
 
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
 				      gic_acpi_match_gicc, 0);
 	if (count > 0)
-		single_redist = true;
+		acpi_data.single_redist = true;
 
 	return count;
 }
@@ -1105,7 +1108,7 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 	if (count <= 0)
 		return false;
 
-	nr_redist_regions = count;
+	acpi_data.nr_redist_regions = count;
 	return true;
 }
 
@@ -1116,25 +1119,28 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 {
 	struct acpi_madt_generic_distributor *dist;
 	struct fwnode_handle *domain_handle;
+	size_t size;
 	int i, err;
 
 	/* Get distributor base address */
 	dist = (struct acpi_madt_generic_distributor *)header;
-	dist_base = ioremap(dist->base_address, ACPI_GICV3_DIST_MEM_SIZE);
-	if (!dist_base) {
+	acpi_data.dist_base = ioremap(dist->base_address,
+				      ACPI_GICV3_DIST_MEM_SIZE);
+	if (!acpi_data.dist_base) {
 		pr_err("Unable to map GICD registers\n");
 		return -ENOMEM;
 	}
 
-	err = gic_validate_dist_version(dist_base);
+	err = gic_validate_dist_version(acpi_data.dist_base);
 	if (err) {
-		pr_err("No distributor detected at @%p, giving up", dist_base);
+		pr_err("No distributor detected at @%p, giving up",
+		       acpi_data.dist_base);
 		goto out_dist_unmap;
 	}
 
-	redist_regs = kzalloc(sizeof(*redist_regs) * nr_redist_regions,
-			      GFP_KERNEL);
-	if (!redist_regs) {
+	size = sizeof(*acpi_data.redist_regs) * acpi_data.nr_redist_regions;
+	acpi_data.redist_regs = kzalloc(size, GFP_KERNEL);
+	if (!acpi_data.redist_regs) {
 		err = -ENOMEM;
 		goto out_dist_unmap;
 	}
@@ -1143,14 +1149,14 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 	if (err)
 		goto out_redist_unmap;
 
-	domain_handle = irq_domain_alloc_fwnode(dist_base);
+	domain_handle = irq_domain_alloc_fwnode(acpi_data.dist_base);
 	if (!domain_handle) {
 		err = -ENOMEM;
 		goto out_redist_unmap;
 	}
 
-	err = gic_init_bases(dist_base, redist_regs, nr_redist_regions, 0,
-			     domain_handle);
+	err = gic_init_bases(acpi_data.dist_base, acpi_data.redist_regs,
+			     acpi_data.nr_redist_regions, 0, domain_handle);
 	if (err)
 		goto out_fwhandle_free;
 
@@ -1160,12 +1166,12 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 out_fwhandle_free:
 	irq_domain_free_fwnode(domain_handle);
 out_redist_unmap:
-	for (i = 0; i < nr_redist_regions; i++)
-		if (redist_regs[i].redist_base)
-			iounmap(redist_regs[i].redist_base);
-	kfree(redist_regs);
+	for (i = 0; i < acpi_data.nr_redist_regions; i++)
+		if (acpi_data.redist_regs[i].redist_base)
+			iounmap(acpi_data.redist_regs[i].redist_base);
+	kfree(acpi_data.redist_regs);
 out_dist_unmap:
-	iounmap(dist_base);
+	iounmap(acpi_data.dist_base);
 	return err;
 }
 IRQCHIP_ACPI_DECLARE(gic_v3, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
-- 
1.9.1

[PATCH v6 06/10] irqchip/gic-v3: Gather all ACPI specific data in a single structure

[Julien Grall]

The ACPI code requires to use global variables in order to collect
information from the tables.

To make clear those variables are ACPI specific, gather all of them in a
single structure.

Furthermore, even if some of the variables are not marked with
__initdata, they are all only used during the initialization. Therefore,
the new variable, which hold the structure, can be marked with
__initdata.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>

---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>

    Changes in v6:
        - Add Christoffer's acked-by
        - Add Hanjun's reviewed-by
        - Fix typo in the commit message

    Changes in v4:
        - Rework commit message

    Changes in v3:
        - Patch added
---
 drivers/irqchip/irq-gic-v3.c | 60 ++++++++++++++++++++++++--------------------
 1 file changed, 33 insertions(+), 27 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6dc6f03..6a9f5ff 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -970,19 +970,22 @@ out_unmap_dist:
 IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init);
 
 #ifdef CONFIG_ACPI
-static void __iomem *dist_base;
-static struct redist_region *redist_regs __initdata;
-static u32 nr_redist_regions __initdata;
-static bool single_redist;
+static struct
+{
+	void __iomem *dist_base;
+	struct redist_region *redist_regs;
+	u32 nr_redist_regions;
+	bool single_redist;
+} acpi_data __initdata;
 
 static void __init
 gic_acpi_register_redist(phys_addr_t phys_base, void __iomem *redist_base)
 {
 	static int count = 0;
 
-	redist_regs[count].phys_base = phys_base;
-	redist_regs[count].redist_base = redist_base;
-	redist_regs[count].single_redist = single_redist;
+	acpi_data.redist_regs[count].phys_base = phys_base;
+	acpi_data.redist_regs[count].redist_base = redist_base;
+	acpi_data.redist_regs[count].single_redist = acpi_data.single_redist;
 	count++;
 }
 
@@ -1010,7 +1013,7 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
 {
 	struct acpi_madt_generic_interrupt *gicc =
 				(struct acpi_madt_generic_interrupt *)header;
-	u32 reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
+	u32 reg = readl_relaxed(acpi_data.dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
 	u32 size = reg == GIC_PIDR2_ARCH_GICv4 ? SZ_64K * 4 : SZ_64K * 2;
 	void __iomem *redist_base;
 
@@ -1027,7 +1030,7 @@ static int __init gic_acpi_collect_gicr_base(void)
 	acpi_tbl_entry_handler redist_parser;
 	enum acpi_madt_type type;
 
-	if (single_redist) {
+	if (acpi_data.single_redist) {
 		type = ACPI_MADT_TYPE_GENERIC_INTERRUPT;
 		redist_parser = gic_acpi_parse_madt_gicc;
 	} else {
@@ -1078,14 +1081,14 @@ static int __init gic_acpi_count_gicr_regions(void)
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
 				      gic_acpi_match_gicr, 0);
 	if (count > 0) {
-		single_redist = false;
+		acpi_data.single_redist = false;
 		return count;
 	}
 
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
 				      gic_acpi_match_gicc, 0);
 	if (count > 0)
-		single_redist = true;
+		acpi_data.single_redist = true;
 
 	return count;
 }
@@ -1105,7 +1108,7 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 	if (count <= 0)
 		return false;
 
-	nr_redist_regions = count;
+	acpi_data.nr_redist_regions = count;
 	return true;
 }
 
@@ -1116,25 +1119,28 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 {
 	struct acpi_madt_generic_distributor *dist;
 	struct fwnode_handle *domain_handle;
+	size_t size;
 	int i, err;
 
 	/* Get distributor base address */
 	dist = (struct acpi_madt_generic_distributor *)header;
-	dist_base = ioremap(dist->base_address, ACPI_GICV3_DIST_MEM_SIZE);
-	if (!dist_base) {
+	acpi_data.dist_base = ioremap(dist->base_address,
+				      ACPI_GICV3_DIST_MEM_SIZE);
+	if (!acpi_data.dist_base) {
 		pr_err("Unable to map GICD registers\n");
 		return -ENOMEM;
 	}
 
-	err = gic_validate_dist_version(dist_base);
+	err = gic_validate_dist_version(acpi_data.dist_base);
 	if (err) {
-		pr_err("No distributor detected at @%p, giving up", dist_base);
+		pr_err("No distributor detected at @%p, giving up",
+		       acpi_data.dist_base);
 		goto out_dist_unmap;
 	}
 
-	redist_regs = kzalloc(sizeof(*redist_regs) * nr_redist_regions,
-			      GFP_KERNEL);
-	if (!redist_regs) {
+	size = sizeof(*acpi_data.redist_regs) * acpi_data.nr_redist_regions;
+	acpi_data.redist_regs = kzalloc(size, GFP_KERNEL);
+	if (!acpi_data.redist_regs) {
 		err = -ENOMEM;
 		goto out_dist_unmap;
 	}
@@ -1143,14 +1149,14 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 	if (err)
 		goto out_redist_unmap;
 
-	domain_handle = irq_domain_alloc_fwnode(dist_base);
+	domain_handle = irq_domain_alloc_fwnode(acpi_data.dist_base);
 	if (!domain_handle) {
 		err = -ENOMEM;
 		goto out_redist_unmap;
 	}
 
-	err = gic_init_bases(dist_base, redist_regs, nr_redist_regions, 0,
-			     domain_handle);
+	err = gic_init_bases(acpi_data.dist_base, acpi_data.redist_regs,
+			     acpi_data.nr_redist_regions, 0, domain_handle);
 	if (err)
 		goto out_fwhandle_free;
 
@@ -1160,12 +1166,12 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 out_fwhandle_free:
 	irq_domain_free_fwnode(domain_handle);
 out_redist_unmap:
-	for (i = 0; i < nr_redist_regions; i++)
-		if (redist_regs[i].redist_base)
-			iounmap(redist_regs[i].redist_base);
-	kfree(redist_regs);
+	for (i = 0; i < acpi_data.nr_redist_regions; i++)
+		if (acpi_data.redist_regs[i].redist_base)
+			iounmap(acpi_data.redist_regs[i].redist_base);
+	kfree(acpi_data.redist_regs);
 out_dist_unmap:
-	iounmap(dist_base);
+	iounmap(acpi_data.dist_base);
 	return err;
 }
 IRQCHIP_ACPI_DECLARE(gic_v3, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
-- 
1.9.1

[PATCH v6 07/10] irqchip/gic-v3: Parse and export virtual GIC information

[Julien Grall]

Fill up the recently introduced gic_kvm_info with the hardware
information used for virtualization.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

---
    Changes in v6:
        - Skip unusable CPUs

    Changes in v5:
        - Remove the alignment check for GICV. It's already done in the
        KVM code.
        - Fix initialization of KVM with ACPI.

    Changes in v4:
        - Change the flow to call gic_kvm_set_info only when all the
        mandatory information are valid.
        - Remove unecessary code in ACPI parsing (the virtual control
        interface doesn't exist for GICv3).
        - Rework commit message
        - Rework the ACPI support as it didn't collect hardware info for
        virtualization when there is more than 1 redistributor region

    Changes in v3:
        - Add ACPI support

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl
---
 drivers/irqchip/irq-gic-v3.c           | 114 ++++++++++++++++++++++++++++++++-
 include/linux/irqchip/arm-gic-common.h |   1 +
 2 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6a9f5ff..05a8560 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 
 #include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic-common.h>
 #include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/cputype.h>
@@ -58,6 +59,8 @@ struct gic_chip_data {
 static struct gic_chip_data gic_data __read_mostly;
 static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
 
+static struct gic_kvm_info gic_v3_kvm_info;
+
 #define gic_data_rdist()		(this_cpu_ptr(gic_data.rdists.rdist))
 #define gic_data_rdist_rd_base()	(gic_data_rdist()->rd_base)
 #define gic_data_rdist_sgi_base()	(gic_data_rdist_rd_base() + SZ_64K)
@@ -903,6 +906,30 @@ static int __init gic_validate_dist_version(void __iomem *dist_base)
 	return 0;
 }
 
+static void __init gic_of_setup_kvm_info(struct device_node *node)
+{
+	int ret;
+	struct resource r;
+	u32 gicv_idx;
+
+	gic_v3_kvm_info.type = GIC_V3;
+
+	gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
+	if (!gic_v3_kvm_info.maint_irq)
+		return;
+
+	if (of_property_read_u32(node, "#redistributor-regions",
+				 &gicv_idx))
+		gicv_idx = 1;
+
+	gicv_idx += 3;	/* Also skip GICD, GICC, GICH */
+	ret = of_address_to_resource(node, gicv_idx, &r);
+	if (!ret)
+		gic_v3_kvm_info.vcpu = r;
+
+	gic_set_kvm_info(&gic_v3_kvm_info);
+}
+
 static int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *dist_base;
@@ -954,8 +981,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
 
 	err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
 			     redist_stride, &node->fwnode);
-	if (!err)
+	if (!err) {
+		gic_of_setup_kvm_info(node);
 		return 0;
+	}
 
 out_unmap_rdist:
 	for (i = 0; i < nr_redist_regions; i++)
@@ -976,6 +1005,9 @@ static struct
 	struct redist_region *redist_regs;
 	u32 nr_redist_regions;
 	bool single_redist;
+	u32 maint_irq;
+	int maint_irq_mode;
+	phys_addr_t vcpu_base;
 } acpi_data __initdata;
 
 static void __init
@@ -1112,7 +1144,85 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 	return true;
 }
 
+static int __init gic_acpi_parse_virt_madt_gicc(struct acpi_subtable_header *header,
+						const unsigned long end)
+{
+	struct acpi_madt_generic_interrupt *gicc =
+		(struct acpi_madt_generic_interrupt *)header;
+	int maint_irq_mode;
+	static int first_madt = true;
+
+	/* Skip unusable CPUs */
+	if (!(gicc->flags & ACPI_MADT_ENABLED))
+		return 0;
+
+	maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
+		ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+
+	if (first_madt) {
+		first_madt = false;
+
+		acpi_data.maint_irq = gicc->vgic_interrupt;
+		acpi_data.maint_irq_mode = maint_irq_mode;
+		acpi_data.vcpu_base = gicc->gicv_base_address;
+
+		return 0;
+	}
+
+	/*
+	 * The maintenance interrupt and GICV should be the same for every CPU
+	 */
+	if ((acpi_data.maint_irq != gicc->vgic_interrupt) ||
+	    (acpi_data.maint_irq_mode != maint_irq_mode) ||
+	    (acpi_data.vcpu_base != gicc->gicv_base_address))
+		return -EINVAL;
+
+	return 0;
+}
+
+static bool __init gic_acpi_collect_virt_info(void)
+{
+	int count;
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
+				      gic_acpi_parse_virt_madt_gicc, 0);
+
+	return (count > 0);
+}
+
 #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K)
+#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
+#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
+
+static void __init gic_acpi_setup_kvm_info(void)
+{
+	int irq;
+
+	if (!gic_acpi_collect_virt_info()) {
+		pr_warn("Unable to get hardware information used for virtualization\n");
+		return;
+	}
+
+	gic_v3_kvm_info.type = GIC_V3;
+
+	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
+				acpi_data.maint_irq_mode,
+				ACPI_ACTIVE_HIGH);
+	if (irq <= 0)
+		return;
+
+	gic_v3_kvm_info.maint_irq = irq;
+
+	if (acpi_data.vcpu_base) {
+		struct resource *vcpu = &gic_v3_kvm_info.vcpu;
+
+		vcpu->flags = IORESOURCE_MEM;
+		vcpu->start = acpi_data.vcpu_base;
+		vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
+	}
+
+	gic_set_kvm_info(&gic_v3_kvm_info);
+}
 
 static int __init
 gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
@@ -1161,6 +1271,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 		goto out_fwhandle_free;
 
 	acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
+	gic_acpi_setup_kvm_info();
+
 	return 0;
 
 out_fwhandle_free:
diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
index ef34f6f..c647b05 100644
--- a/include/linux/irqchip/arm-gic-common.h
+++ b/include/linux/irqchip/arm-gic-common.h
@@ -15,6 +15,7 @@
 
 enum gic_type {
 	GIC_V2,
+	GIC_V3,
 };
 
 struct gic_kvm_info {
-- 
1.9.1

[PATCH v6 07/10] irqchip/gic-v3: Parse and export virtual GIC information

[Julien Grall]

Fill up the recently introduced gic_kvm_info with the hardware
information used for virtualization.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

---
    Changes in v6:
        - Skip unusable CPUs

    Changes in v5:
        - Remove the alignment check for GICV. It's already done in the
        KVM code.
        - Fix initialization of KVM with ACPI.

    Changes in v4:
        - Change the flow to call gic_kvm_set_info only when all the
        mandatory information are valid.
        - Remove unecessary code in ACPI parsing (the virtual control
        interface doesn't exist for GICv3).
        - Rework commit message
        - Rework the ACPI support as it didn't collect hardware info for
        virtualization when there is more than 1 redistributor region

    Changes in v3:
        - Add ACPI support

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl
---
 drivers/irqchip/irq-gic-v3.c           | 114 ++++++++++++++++++++++++++++++++-
 include/linux/irqchip/arm-gic-common.h |   1 +
 2 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6a9f5ff..05a8560 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 
 #include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic-common.h>
 #include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/cputype.h>
@@ -58,6 +59,8 @@ struct gic_chip_data {
 static struct gic_chip_data gic_data __read_mostly;
 static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
 
+static struct gic_kvm_info gic_v3_kvm_info;
+
 #define gic_data_rdist()		(this_cpu_ptr(gic_data.rdists.rdist))
 #define gic_data_rdist_rd_base()	(gic_data_rdist()->rd_base)
 #define gic_data_rdist_sgi_base()	(gic_data_rdist_rd_base() + SZ_64K)
@@ -903,6 +906,30 @@ static int __init gic_validate_dist_version(void __iomem *dist_base)
 	return 0;
 }
 
+static void __init gic_of_setup_kvm_info(struct device_node *node)
+{
+	int ret;
+	struct resource r;
+	u32 gicv_idx;
+
+	gic_v3_kvm_info.type = GIC_V3;
+
+	gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
+	if (!gic_v3_kvm_info.maint_irq)
+		return;
+
+	if (of_property_read_u32(node, "#redistributor-regions",
+				 &gicv_idx))
+		gicv_idx = 1;
+
+	gicv_idx += 3;	/* Also skip GICD, GICC, GICH */
+	ret = of_address_to_resource(node, gicv_idx, &r);
+	if (!ret)
+		gic_v3_kvm_info.vcpu = r;
+
+	gic_set_kvm_info(&gic_v3_kvm_info);
+}
+
 static int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *dist_base;
@@ -954,8 +981,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
 
 	err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
 			     redist_stride, &node->fwnode);
-	if (!err)
+	if (!err) {
+		gic_of_setup_kvm_info(node);
 		return 0;
+	}
 
 out_unmap_rdist:
 	for (i = 0; i < nr_redist_regions; i++)
@@ -976,6 +1005,9 @@ static struct
 	struct redist_region *redist_regs;
 	u32 nr_redist_regions;
 	bool single_redist;
+	u32 maint_irq;
+	int maint_irq_mode;
+	phys_addr_t vcpu_base;
 } acpi_data __initdata;
 
 static void __init
@@ -1112,7 +1144,85 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 	return true;
 }
 
+static int __init gic_acpi_parse_virt_madt_gicc(struct acpi_subtable_header *header,
+						const unsigned long end)
+{
+	struct acpi_madt_generic_interrupt *gicc =
+		(struct acpi_madt_generic_interrupt *)header;
+	int maint_irq_mode;
+	static int first_madt = true;
+
+	/* Skip unusable CPUs */
+	if (!(gicc->flags & ACPI_MADT_ENABLED))
+		return 0;
+
+	maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
+		ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+
+	if (first_madt) {
+		first_madt = false;
+
+		acpi_data.maint_irq = gicc->vgic_interrupt;
+		acpi_data.maint_irq_mode = maint_irq_mode;
+		acpi_data.vcpu_base = gicc->gicv_base_address;
+
+		return 0;
+	}
+
+	/*
+	 * The maintenance interrupt and GICV should be the same for every CPU
+	 */
+	if ((acpi_data.maint_irq != gicc->vgic_interrupt) ||
+	    (acpi_data.maint_irq_mode != maint_irq_mode) ||
+	    (acpi_data.vcpu_base != gicc->gicv_base_address))
+		return -EINVAL;
+
+	return 0;
+}
+
+static bool __init gic_acpi_collect_virt_info(void)
+{
+	int count;
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
+				      gic_acpi_parse_virt_madt_gicc, 0);
+
+	return (count > 0);
+}
+
 #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K)
+#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
+#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
+
+static void __init gic_acpi_setup_kvm_info(void)
+{
+	int irq;
+
+	if (!gic_acpi_collect_virt_info()) {
+		pr_warn("Unable to get hardware information used for virtualization\n");
+		return;
+	}
+
+	gic_v3_kvm_info.type = GIC_V3;
+
+	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
+				acpi_data.maint_irq_mode,
+				ACPI_ACTIVE_HIGH);
+	if (irq <= 0)
+		return;
+
+	gic_v3_kvm_info.maint_irq = irq;
+
+	if (acpi_data.vcpu_base) {
+		struct resource *vcpu = &gic_v3_kvm_info.vcpu;
+
+		vcpu->flags = IORESOURCE_MEM;
+		vcpu->start = acpi_data.vcpu_base;
+		vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
+	}
+
+	gic_set_kvm_info(&gic_v3_kvm_info);
+}
 
 static int __init
 gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
@@ -1161,6 +1271,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 		goto out_fwhandle_free;
 
 	acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
+	gic_acpi_setup_kvm_info();
+
 	return 0;
 
 out_fwhandle_free:
diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
index ef34f6f..c647b05 100644
--- a/include/linux/irqchip/arm-gic-common.h
+++ b/include/linux/irqchip/arm-gic-common.h
@@ -15,6 +15,7 @@
 
 enum gic_type {
 	GIC_V2,
+	GIC_V3,
 };
 
 struct gic_kvm_info {
-- 
1.9.1

[PATCH v6 07/10] irqchip/gic-v3: Parse and export virtual GIC information

[Julien Grall]

Fill up the recently introduced gic_kvm_info with the hardware
information used for virtualization.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

---
    Changes in v6:
        - Skip unusable CPUs

    Changes in v5:
        - Remove the alignment check for GICV. It's already done in the
        KVM code.
        - Fix initialization of KVM with ACPI.

    Changes in v4:
        - Change the flow to call gic_kvm_set_info only when all the
        mandatory information are valid.
        - Remove unecessary code in ACPI parsing (the virtual control
        interface doesn't exist for GICv3).
        - Rework commit message
        - Rework the ACPI support as it didn't collect hardware info for
        virtualization when there is more than 1 redistributor region

    Changes in v3:
        - Add ACPI support

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl
---
 drivers/irqchip/irq-gic-v3.c           | 114 ++++++++++++++++++++++++++++++++-
 include/linux/irqchip/arm-gic-common.h |   1 +
 2 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6a9f5ff..05a8560 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 
 #include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic-common.h>
 #include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/cputype.h>
@@ -58,6 +59,8 @@ struct gic_chip_data {
 static struct gic_chip_data gic_data __read_mostly;
 static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
 
+static struct gic_kvm_info gic_v3_kvm_info;
+
 #define gic_data_rdist()		(this_cpu_ptr(gic_data.rdists.rdist))
 #define gic_data_rdist_rd_base()	(gic_data_rdist()->rd_base)
 #define gic_data_rdist_sgi_base()	(gic_data_rdist_rd_base() + SZ_64K)
@@ -903,6 +906,30 @@ static int __init gic_validate_dist_version(void __iomem *dist_base)
 	return 0;
 }
 
+static void __init gic_of_setup_kvm_info(struct device_node *node)
+{
+	int ret;
+	struct resource r;
+	u32 gicv_idx;
+
+	gic_v3_kvm_info.type = GIC_V3;
+
+	gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
+	if (!gic_v3_kvm_info.maint_irq)
+		return;
+
+	if (of_property_read_u32(node, "#redistributor-regions",
+				 &gicv_idx))
+		gicv_idx = 1;
+
+	gicv_idx += 3;	/* Also skip GICD, GICC, GICH */
+	ret = of_address_to_resource(node, gicv_idx, &r);
+	if (!ret)
+		gic_v3_kvm_info.vcpu = r;
+
+	gic_set_kvm_info(&gic_v3_kvm_info);
+}
+
 static int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *dist_base;
@@ -954,8 +981,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
 
 	err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
 			     redist_stride, &node->fwnode);
-	if (!err)
+	if (!err) {
+		gic_of_setup_kvm_info(node);
 		return 0;
+	}
 
 out_unmap_rdist:
 	for (i = 0; i < nr_redist_regions; i++)
@@ -976,6 +1005,9 @@ static struct
 	struct redist_region *redist_regs;
 	u32 nr_redist_regions;
 	bool single_redist;
+	u32 maint_irq;
+	int maint_irq_mode;
+	phys_addr_t vcpu_base;
 } acpi_data __initdata;
 
 static void __init
@@ -1112,7 +1144,85 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 	return true;
 }
 
+static int __init gic_acpi_parse_virt_madt_gicc(struct acpi_subtable_header *header,
+						const unsigned long end)
+{
+	struct acpi_madt_generic_interrupt *gicc =
+		(struct acpi_madt_generic_interrupt *)header;
+	int maint_irq_mode;
+	static int first_madt = true;
+
+	/* Skip unusable CPUs */
+	if (!(gicc->flags & ACPI_MADT_ENABLED))
+		return 0;
+
+	maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
+		ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+
+	if (first_madt) {
+		first_madt = false;
+
+		acpi_data.maint_irq = gicc->vgic_interrupt;
+		acpi_data.maint_irq_mode = maint_irq_mode;
+		acpi_data.vcpu_base = gicc->gicv_base_address;
+
+		return 0;
+	}
+
+	/*
+	 * The maintenance interrupt and GICV should be the same for every CPU
+	 */
+	if ((acpi_data.maint_irq != gicc->vgic_interrupt) ||
+	    (acpi_data.maint_irq_mode != maint_irq_mode) ||
+	    (acpi_data.vcpu_base != gicc->gicv_base_address))
+		return -EINVAL;
+
+	return 0;
+}
+
+static bool __init gic_acpi_collect_virt_info(void)
+{
+	int count;
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
+				      gic_acpi_parse_virt_madt_gicc, 0);
+
+	return (count > 0);
+}
+
 #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K)
+#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
+#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
+
+static void __init gic_acpi_setup_kvm_info(void)
+{
+	int irq;
+
+	if (!gic_acpi_collect_virt_info()) {
+		pr_warn("Unable to get hardware information used for virtualization\n");
+		return;
+	}
+
+	gic_v3_kvm_info.type = GIC_V3;
+
+	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
+				acpi_data.maint_irq_mode,
+				ACPI_ACTIVE_HIGH);
+	if (irq <= 0)
+		return;
+
+	gic_v3_kvm_info.maint_irq = irq;
+
+	if (acpi_data.vcpu_base) {
+		struct resource *vcpu = &gic_v3_kvm_info.vcpu;
+
+		vcpu->flags = IORESOURCE_MEM;
+		vcpu->start = acpi_data.vcpu_base;
+		vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
+	}
+
+	gic_set_kvm_info(&gic_v3_kvm_info);
+}
 
 static int __init
 gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
@@ -1161,6 +1271,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 		goto out_fwhandle_free;
 
 	acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
+	gic_acpi_setup_kvm_info();
+
 	return 0;
 
 out_fwhandle_free:
diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
index ef34f6f..c647b05 100644
--- a/include/linux/irqchip/arm-gic-common.h
+++ b/include/linux/irqchip/arm-gic-common.h
@@ -15,6 +15,7 @@
 
 enum gic_type {
 	GIC_V2,
+	GIC_V3,
 };
 
 struct gic_kvm_info {
-- 
1.9.1

[PATCH v6 08/10] KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the firmware tables

[Julien Grall]

The firmware table is currently parsed by the virtual timer code in
order to retrieve the virtual timer interrupt. However, this is already
done by the arch timer driver.

To avoid code duplication, use the newly function arch_timer_get_kvm_info()
which return all the information required by the virtual timer code.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>

    Changes in v4:
        - Add Christoffer's acked-by

    Changes in v3:
        - Patch added
---
 virt/kvm/arm/arch_timer.c | 40 +++++++++++-----------------------------
 1 file changed, 11 insertions(+), 29 deletions(-)

diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index a9ad4fe..c6a6f8e 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -17,7 +17,6 @@
  */
 
 #include <linux/cpu.h>
-#include <linux/of_irq.h>
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
@@ -409,45 +408,29 @@ static struct notifier_block kvm_timer_cpu_nb = {
 	.notifier_call = kvm_timer_cpu_notify,
 };
 
-static const struct of_device_id arch_timer_of_match[] = {
-	{ .compatible	= "arm,armv7-timer",	},
-	{ .compatible	= "arm,armv8-timer",	},
-	{},
-};
-
 int kvm_timer_hyp_init(void)
 {
-	struct device_node *np;
-	unsigned int ppi;
+	struct arch_timer_kvm_info *info;
 	int err;
 
-	timecounter = arch_timer_get_timecounter();
-	if (!timecounter)
-		return -ENODEV;
+	info = arch_timer_get_kvm_info();
+	timecounter = &info->timecounter;
 
-	np = of_find_matching_node(NULL, arch_timer_of_match);
-	if (!np) {
-		kvm_err("kvm_arch_timer: can't find DT node\n");
+	if (info->virtual_irq <= 0) {
+		kvm_err("kvm_arch_timer: invalid virtual timer IRQ: %d\n",
+			info->virtual_irq);
 		return -ENODEV;
 	}
+	host_vtimer_irq = info->virtual_irq;
 
-	ppi = irq_of_parse_and_map(np, 2);
-	if (!ppi) {
-		kvm_err("kvm_arch_timer: no virtual timer interrupt\n");
-		err = -EINVAL;
-		goto out;
-	}
-
-	err = request_percpu_irq(ppi, kvm_arch_timer_handler,
+	err = request_percpu_irq(host_vtimer_irq, kvm_arch_timer_handler,
 				 "kvm guest timer", kvm_get_running_vcpus());
 	if (err) {
 		kvm_err("kvm_arch_timer: can't request interrupt %d (%d)\n",
-			ppi, err);
+			host_vtimer_irq, err);
 		goto out;
 	}
 
-	host_vtimer_irq = ppi;
-
 	err = __register_cpu_notifier(&kvm_timer_cpu_nb);
 	if (err) {
 		kvm_err("Cannot register timer CPU notifier\n");
@@ -460,14 +443,13 @@ int kvm_timer_hyp_init(void)
 		goto out_free;
 	}
 
-	kvm_info("%s IRQ%d\n", np->name, ppi);
+	kvm_info("virtual timer IRQ%d\n", host_vtimer_irq);
 	on_each_cpu(kvm_timer_init_interrupt, NULL, 1);
 
 	goto out;
 out_free:
-	free_percpu_irq(ppi, kvm_get_running_vcpus());
+	free_percpu_irq(host_vtimer_irq, kvm_get_running_vcpus());
 out:
-	of_node_put(np);
 	return err;
 }
 
-- 
1.9.1

[PATCH v6 08/10] KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the firmware tables

[Julien Grall]

The firmware table is currently parsed by the virtual timer code in
order to retrieve the virtual timer interrupt. However, this is already
done by the arch timer driver.

To avoid code duplication, use the newly function arch_timer_get_kvm_info()
which return all the information required by the virtual timer code.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>

    Changes in v4:
        - Add Christoffer's acked-by

    Changes in v3:
        - Patch added
---
 virt/kvm/arm/arch_timer.c | 40 +++++++++++-----------------------------
 1 file changed, 11 insertions(+), 29 deletions(-)

diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index a9ad4fe..c6a6f8e 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -17,7 +17,6 @@
  */
 
 #include <linux/cpu.h>
-#include <linux/of_irq.h>
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
@@ -409,45 +408,29 @@ static struct notifier_block kvm_timer_cpu_nb = {
 	.notifier_call = kvm_timer_cpu_notify,
 };
 
-static const struct of_device_id arch_timer_of_match[] = {
-	{ .compatible	= "arm,armv7-timer",	},
-	{ .compatible	= "arm,armv8-timer",	},
-	{},
-};
-
 int kvm_timer_hyp_init(void)
 {
-	struct device_node *np;
-	unsigned int ppi;
+	struct arch_timer_kvm_info *info;
 	int err;
 
-	timecounter = arch_timer_get_timecounter();
-	if (!timecounter)
-		return -ENODEV;
+	info = arch_timer_get_kvm_info();
+	timecounter = &info->timecounter;
 
-	np = of_find_matching_node(NULL, arch_timer_of_match);
-	if (!np) {
-		kvm_err("kvm_arch_timer: can't find DT node\n");
+	if (info->virtual_irq <= 0) {
+		kvm_err("kvm_arch_timer: invalid virtual timer IRQ: %d\n",
+			info->virtual_irq);
 		return -ENODEV;
 	}
+	host_vtimer_irq = info->virtual_irq;
 
-	ppi = irq_of_parse_and_map(np, 2);
-	if (!ppi) {
-		kvm_err("kvm_arch_timer: no virtual timer interrupt\n");
-		err = -EINVAL;
-		goto out;
-	}
-
-	err = request_percpu_irq(ppi, kvm_arch_timer_handler,
+	err = request_percpu_irq(host_vtimer_irq, kvm_arch_timer_handler,
 				 "kvm guest timer", kvm_get_running_vcpus());
 	if (err) {
 		kvm_err("kvm_arch_timer: can't request interrupt %d (%d)\n",
-			ppi, err);
+			host_vtimer_irq, err);
 		goto out;
 	}
 
-	host_vtimer_irq = ppi;
-
 	err = __register_cpu_notifier(&kvm_timer_cpu_nb);
 	if (err) {
 		kvm_err("Cannot register timer CPU notifier\n");
@@ -460,14 +443,13 @@ int kvm_timer_hyp_init(void)
 		goto out_free;
 	}
 
-	kvm_info("%s IRQ%d\n", np->name, ppi);
+	kvm_info("virtual timer IRQ%d\n", host_vtimer_irq);
 	on_each_cpu(kvm_timer_init_interrupt, NULL, 1);
 
 	goto out;
 out_free:
-	free_percpu_irq(ppi, kvm_get_running_vcpus());
+	free_percpu_irq(host_vtimer_irq, kvm_get_running_vcpus());
 out:
-	of_node_put(np);
 	return err;
 }
 
-- 
1.9.1

[PATCH v6 08/10] KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the firmware tables

[Julien Grall]

The firmware table is currently parsed by the virtual timer code in
order to retrieve the virtual timer interrupt. However, this is already
done by the arch timer driver.

To avoid code duplication, use the newly function arch_timer_get_kvm_info()
which return all the information required by the virtual timer code.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>

    Changes in v4:
        - Add Christoffer's acked-by

    Changes in v3:
        - Patch added
---
 virt/kvm/arm/arch_timer.c | 40 +++++++++++-----------------------------
 1 file changed, 11 insertions(+), 29 deletions(-)

diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index a9ad4fe..c6a6f8e 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -17,7 +17,6 @@
  */
 
 #include <linux/cpu.h>
-#include <linux/of_irq.h>
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
@@ -409,45 +408,29 @@ static struct notifier_block kvm_timer_cpu_nb = {
 	.notifier_call = kvm_timer_cpu_notify,
 };
 
-static const struct of_device_id arch_timer_of_match[] = {
-	{ .compatible	= "arm,armv7-timer",	},
-	{ .compatible	= "arm,armv8-timer",	},
-	{},
-};
-
 int kvm_timer_hyp_init(void)
 {
-	struct device_node *np;
-	unsigned int ppi;
+	struct arch_timer_kvm_info *info;
 	int err;
 
-	timecounter = arch_timer_get_timecounter();
-	if (!timecounter)
-		return -ENODEV;
+	info = arch_timer_get_kvm_info();
+	timecounter = &info->timecounter;
 
-	np = of_find_matching_node(NULL, arch_timer_of_match);
-	if (!np) {
-		kvm_err("kvm_arch_timer: can't find DT node\n");
+	if (info->virtual_irq <= 0) {
+		kvm_err("kvm_arch_timer: invalid virtual timer IRQ: %d\n",
+			info->virtual_irq);
 		return -ENODEV;
 	}
+	host_vtimer_irq = info->virtual_irq;
 
-	ppi = irq_of_parse_and_map(np, 2);
-	if (!ppi) {
-		kvm_err("kvm_arch_timer: no virtual timer interrupt\n");
-		err = -EINVAL;
-		goto out;
-	}
-
-	err = request_percpu_irq(ppi, kvm_arch_timer_handler,
+	err = request_percpu_irq(host_vtimer_irq, kvm_arch_timer_handler,
 				 "kvm guest timer", kvm_get_running_vcpus());
 	if (err) {
 		kvm_err("kvm_arch_timer: can't request interrupt %d (%d)\n",
-			ppi, err);
+			host_vtimer_irq, err);
 		goto out;
 	}
 
-	host_vtimer_irq = ppi;
-
 	err = __register_cpu_notifier(&kvm_timer_cpu_nb);
 	if (err) {
 		kvm_err("Cannot register timer CPU notifier\n");
@@ -460,14 +443,13 @@ int kvm_timer_hyp_init(void)
 		goto out_free;
 	}
 
-	kvm_info("%s IRQ%d\n", np->name, ppi);
+	kvm_info("virtual timer IRQ%d\n", host_vtimer_irq);
 	on_each_cpu(kvm_timer_init_interrupt, NULL, 1);
 
 	goto out;
 out_free:
-	free_percpu_irq(ppi, kvm_get_running_vcpus());
+	free_percpu_irq(host_vtimer_irq, kvm_get_running_vcpus());
 out:
-	of_node_put(np);
 	return err;
 }
 
-- 
1.9.1

[PATCH v6 09/10] KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware tables

[Julien Grall]

Currently, the firmware tables are parsed 2 times: once in the GIC
drivers, the other time when initializing the vGIC. It means code
duplication and make more tedious to add the support for another
firmware table (like ACPI).

Use the recently introduced helper gic_get_kvm_info() to get
information about the virtual GIC.

With this change, the virtual GIC becomes agnostic to the firmware
table and KVM will be able to initialize the vGIC on ACPI.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>

    Changes in v6:
        - Add Christoffer's reviewed-by

    Changes in v4:
        - Remove validation check as they are already done during
        parsing.
        - Move the alignement check from the parsing to the vGIC code.
        - Fix typo in the commit message

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl.
---
 include/kvm/arm_vgic.h |  7 +++---
 virt/kvm/arm/vgic-v2.c | 61 +++++++++++++++++++++-----------------------------
 virt/kvm/arm/vgic-v3.c | 47 +++++++++++++-------------------------
 virt/kvm/arm/vgic.c    | 50 ++++++++++++++++++++++-------------------
 4 files changed, 73 insertions(+), 92 deletions(-)

diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 281caf8..be6037a 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -25,6 +25,7 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include <kvm/iodev.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #define VGIC_NR_IRQS_LEGACY	256
 #define VGIC_NR_SGIS		16
@@ -353,15 +354,15 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
 #define vgic_initialized(k)	(!!((k)->arch.vgic.nr_cpus))
 #define vgic_ready(k)		((k)->arch.vgic.ready)
 
-int vgic_v2_probe(struct device_node *vgic_node,
+int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params);
 #ifdef CONFIG_KVM_ARM_VGIC_V3
-int vgic_v3_probe(struct device_node *vgic_node,
+int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params);
 #else
-static inline int vgic_v3_probe(struct device_node *vgic_node,
+static inline int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 				const struct vgic_ops **ops,
 				const struct vgic_params **params)
 {
diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
index 67ec334..7e826c9 100644
--- a/virt/kvm/arm/vgic-v2.c
+++ b/virt/kvm/arm/vgic-v2.c
@@ -20,9 +20,6 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 
 #include <linux/irqchip/arm-gic.h>
 
@@ -186,38 +183,39 @@ static void vgic_cpu_init_lrs(void *params)
 }
 
 /**
- * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT
- * @node:	pointer to the DT node
- * @ops: 	address of a pointer to the GICv2 operations
- * @params:	address of a pointer to HW-specific parameters
+ * vgic_v2_probe - probe for a GICv2 compatible interrupt controller
+ * @gic_kvm_info:	pointer to the GIC description
+ * @ops:		address of a pointer to the GICv2 operations
+ * @params:		address of a pointer to HW-specific parameters
  *
  * Returns 0 if a GICv2 has been found, with the low level operations
  * in *ops and the HW parameters in *params. Returns an error code
  * otherwise.
  */
-int vgic_v2_probe(struct device_node *vgic_node,
-		  const struct vgic_ops **ops,
-		  const struct vgic_params **params)
+int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
+		   const struct vgic_ops **ops,
+		   const struct vgic_params **params)
 {
 	int ret;
-	struct resource vctrl_res;
-	struct resource vcpu_res;
 	struct vgic_params *vgic = &vgic_v2_params;
+	const struct resource *vctrl_res = &gic_kvm_info->vctrl;
+	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
 
-	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
-	if (!vgic->maint_irq) {
-		kvm_err("error getting vgic maintenance irq from DT\n");
+	if (!gic_kvm_info->maint_irq) {
+		kvm_err("error getting vgic maintenance irq\n");
 		ret = -ENXIO;
 		goto out;
 	}
+	vgic->maint_irq = gic_kvm_info->maint_irq;
 
-	ret = of_address_to_resource(vgic_node, 2, &vctrl_res);
-	if (ret) {
-		kvm_err("Cannot obtain GICH resource\n");
+	if (!gic_kvm_info->vctrl.start) {
+		kvm_err("GICH not present in the firmware table\n");
+		ret = -ENXIO;
 		goto out;
 	}
 
-	vgic->vctrl_base = of_iomap(vgic_node, 2);
+	vgic->vctrl_base = ioremap(gic_kvm_info->vctrl.start,
+				   resource_size(&gic_kvm_info->vctrl));
 	if (!vgic->vctrl_base) {
 		kvm_err("Cannot ioremap GICH\n");
 		ret = -ENOMEM;
@@ -228,29 +226,23 @@ int vgic_v2_probe(struct device_node *vgic_node,
 	vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
 
 	ret = create_hyp_io_mappings(vgic->vctrl_base,
-				     vgic->vctrl_base + resource_size(&vctrl_res),
-				     vctrl_res.start);
+				     vgic->vctrl_base + resource_size(vctrl_res),
+				     vctrl_res->start);
 	if (ret) {
 		kvm_err("Cannot map VCTRL into hyp\n");
 		goto out_unmap;
 	}
 
-	if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
-		kvm_err("Cannot obtain GICV resource\n");
-		ret = -ENXIO;
-		goto out_unmap;
-	}
-
-	if (!PAGE_ALIGNED(vcpu_res.start)) {
+	if (!PAGE_ALIGNED(vcpu_res->start)) {
 		kvm_err("GICV physical address 0x%llx not page aligned\n",
-			(unsigned long long)vcpu_res.start);
+			(unsigned long long)vcpu_res->start);
 		ret = -ENXIO;
 		goto out_unmap;
 	}
 
-	if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
+	if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
 		kvm_err("GICV size 0x%llx not a multiple of page size 0x%lx\n",
-			(unsigned long long)resource_size(&vcpu_res),
+			(unsigned long long)resource_size(vcpu_res),
 			PAGE_SIZE);
 		ret = -ENXIO;
 		goto out_unmap;
@@ -259,10 +251,10 @@ int vgic_v2_probe(struct device_node *vgic_node,
 	vgic->can_emulate_gicv2 = true;
 	kvm_register_device_ops(&kvm_arm_vgic_v2_ops, KVM_DEV_TYPE_ARM_VGIC_V2);
 
-	vgic->vcpu_base = vcpu_res.start;
+	vgic->vcpu_base = vcpu_res->start;
 
-	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
-		 vctrl_res.start, vgic->maint_irq);
+	kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
+		 gic_kvm_info->vctrl.start, vgic->vcpu_base, vgic->maint_irq);
 
 	vgic->type = VGIC_V2;
 	vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;
@@ -276,6 +268,5 @@ int vgic_v2_probe(struct device_node *vgic_node,
 out_unmap:
 	iounmap(vgic->vctrl_base);
 out:
-	of_node_put(vgic_node);
 	return ret;
 }
diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
index 999bdc6..c02a1b1 100644
--- a/virt/kvm/arm/vgic-v3.c
+++ b/virt/kvm/arm/vgic-v3.c
@@ -20,11 +20,9 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 
 #include <linux/irqchip/arm-gic-v3.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_arm.h>
@@ -222,30 +220,24 @@ static void vgic_cpu_init_lrs(void *params)
 }
 
 /**
- * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT
- * @node:	pointer to the DT node
- * @ops: 	address of a pointer to the GICv3 operations
- * @params:	address of a pointer to HW-specific parameters
+ * vgic_v3_probe - probe for a GICv3 compatible interrupt controller
+ * @gic_kvm_info:	pointer to the GIC description
+ * @ops:		address of a pointer to the GICv3 operations
+ * @params:		address of a pointer to HW-specific parameters
  *
  * Returns 0 if a GICv3 has been found, with the low level operations
  * in *ops and the HW parameters in *params. Returns an error code
  * otherwise.
  */
-int vgic_v3_probe(struct device_node *vgic_node,
+int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params)
 {
 	int ret = 0;
-	u32 gicv_idx;
-	struct resource vcpu_res;
 	struct vgic_params *vgic = &vgic_v3_params;
+	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
 
-	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
-	if (!vgic->maint_irq) {
-		kvm_err("error getting vgic maintenance irq from DT\n");
-		ret = -ENXIO;
-		goto out;
-	}
+	vgic->maint_irq = gic_kvm_info->maint_irq;
 
 	ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2);
 
@@ -256,24 +248,19 @@ int vgic_v3_probe(struct device_node *vgic_node,
 	vgic->nr_lr = (ich_vtr_el2 & 0xf) + 1;
 	vgic->can_emulate_gicv2 = false;
 
-	if (of_property_read_u32(vgic_node, "#redistributor-regions", &gicv_idx))
-		gicv_idx = 1;
-
-	gicv_idx += 3; /* Also skip GICD, GICC, GICH */
-	if (of_address_to_resource(vgic_node, gicv_idx, &vcpu_res)) {
+	if (!vcpu_res->start) {
 		kvm_info("GICv3: no GICV resource entry\n");
 		vgic->vcpu_base = 0;
-	} else if (!PAGE_ALIGNED(vcpu_res.start)) {
+	} else if (!PAGE_ALIGNED(vcpu_res->start)) {
 		pr_warn("GICV physical address 0x%llx not page aligned\n",
-			(unsigned long long)vcpu_res.start);
+			(unsigned long long)vcpu_res->start);
 		vgic->vcpu_base = 0;
-	} else if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
+	} else if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
 		pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n",
-			(unsigned long long)resource_size(&vcpu_res),
+			(unsigned long long)resource_size(vcpu_res),
 			PAGE_SIZE);
-		vgic->vcpu_base = 0;
 	} else {
-		vgic->vcpu_base = vcpu_res.start;
+		vgic->vcpu_base = vcpu_res->start;
 		vgic->can_emulate_gicv2 = true;
 		kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
 					KVM_DEV_TYPE_ARM_VGIC_V2);
@@ -286,15 +273,13 @@ int vgic_v3_probe(struct device_node *vgic_node,
 	vgic->type = VGIC_V3;
 	vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
 
-	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
-		 vcpu_res.start, vgic->maint_irq);
+	kvm_info("GICV base=0x%llx, IRQ=%d\n",
+		 vgic->vcpu_base, vgic->maint_irq);
 
 	on_each_cpu(vgic_cpu_init_lrs, vgic, 1);
 
 	*ops = &vgic_v3_ops;
 	*params = vgic;
 
-out:
-	of_node_put(vgic_node);
 	return ret;
 }
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 00429b3..60668a7 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -21,9 +21,7 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
+#include <linux/irq.h>
 #include <linux/rculist.h>
 #include <linux/uaccess.h>
 
@@ -33,6 +31,7 @@
 #include <trace/events/kvm.h>
 #include <asm/kvm.h>
 #include <kvm/iodev.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
@@ -2389,33 +2388,38 @@ static struct notifier_block vgic_cpu_nb = {
 	.notifier_call = vgic_cpu_notify,
 };
 
-static const struct of_device_id vgic_ids[] = {
-	{ .compatible = "arm,cortex-a15-gic",	.data = vgic_v2_probe, },
-	{ .compatible = "arm,cortex-a7-gic",	.data = vgic_v2_probe, },
-	{ .compatible = "arm,gic-400",		.data = vgic_v2_probe, },
-	{ .compatible = "arm,gic-v3",		.data = vgic_v3_probe, },
-	{},
-};
-
-int kvm_vgic_hyp_init(void)
+static int kvm_vgic_probe(void)
 {
-	const struct of_device_id *matched_id;
-	const int (*vgic_probe)(struct device_node *,const struct vgic_ops **,
-				const struct vgic_params **);
-	struct device_node *vgic_node;
+	const struct gic_kvm_info *gic_kvm_info;
 	int ret;
 
-	vgic_node = of_find_matching_node_and_match(NULL,
-						    vgic_ids, &matched_id);
-	if (!vgic_node) {
-		kvm_err("error: no compatible GIC node found\n");
+	gic_kvm_info = gic_get_kvm_info();
+	if (!gic_kvm_info)
 		return -ENODEV;
+
+	switch (gic_kvm_info->type) {
+	case GIC_V2:
+		ret = vgic_v2_probe(gic_kvm_info, &vgic_ops, &vgic);
+		break;
+	case GIC_V3:
+		ret = vgic_v3_probe(gic_kvm_info, &vgic_ops, &vgic);
+		break;
+	default:
+		ret = -ENODEV;
 	}
 
-	vgic_probe = matched_id->data;
-	ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
-	if (ret)
+	return ret;
+}
+
+int kvm_vgic_hyp_init(void)
+{
+	int ret;
+
+	ret = kvm_vgic_probe();
+	if (ret) {
+		kvm_err("error: KVM vGIC probing failed\n");
 		return ret;
+	}
 
 	ret = request_percpu_irq(vgic->maint_irq, vgic_maintenance_handler,
 				 "vgic", kvm_get_running_vcpus());
-- 
1.9.1

[PATCH v6 09/10] KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware tables

[Julien Grall]

Currently, the firmware tables are parsed 2 times: once in the GIC
drivers, the other time when initializing the vGIC. It means code
duplication and make more tedious to add the support for another
firmware table (like ACPI).

Use the recently introduced helper gic_get_kvm_info() to get
information about the virtual GIC.

With this change, the virtual GIC becomes agnostic to the firmware
table and KVM will be able to initialize the vGIC on ACPI.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>

    Changes in v6:
        - Add Christoffer's reviewed-by

    Changes in v4:
        - Remove validation check as they are already done during
        parsing.
        - Move the alignement check from the parsing to the vGIC code.
        - Fix typo in the commit message

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl.
---
 include/kvm/arm_vgic.h |  7 +++---
 virt/kvm/arm/vgic-v2.c | 61 +++++++++++++++++++++-----------------------------
 virt/kvm/arm/vgic-v3.c | 47 +++++++++++++-------------------------
 virt/kvm/arm/vgic.c    | 50 ++++++++++++++++++++++-------------------
 4 files changed, 73 insertions(+), 92 deletions(-)

diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 281caf8..be6037a 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -25,6 +25,7 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include <kvm/iodev.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #define VGIC_NR_IRQS_LEGACY	256
 #define VGIC_NR_SGIS		16
@@ -353,15 +354,15 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
 #define vgic_initialized(k)	(!!((k)->arch.vgic.nr_cpus))
 #define vgic_ready(k)		((k)->arch.vgic.ready)
 
-int vgic_v2_probe(struct device_node *vgic_node,
+int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params);
 #ifdef CONFIG_KVM_ARM_VGIC_V3
-int vgic_v3_probe(struct device_node *vgic_node,
+int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params);
 #else
-static inline int vgic_v3_probe(struct device_node *vgic_node,
+static inline int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 				const struct vgic_ops **ops,
 				const struct vgic_params **params)
 {
diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
index 67ec334..7e826c9 100644
--- a/virt/kvm/arm/vgic-v2.c
+++ b/virt/kvm/arm/vgic-v2.c
@@ -20,9 +20,6 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 
 #include <linux/irqchip/arm-gic.h>
 
@@ -186,38 +183,39 @@ static void vgic_cpu_init_lrs(void *params)
 }
 
 /**
- * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT
- * @node:	pointer to the DT node
- * @ops: 	address of a pointer to the GICv2 operations
- * @params:	address of a pointer to HW-specific parameters
+ * vgic_v2_probe - probe for a GICv2 compatible interrupt controller
+ * @gic_kvm_info:	pointer to the GIC description
+ * @ops:		address of a pointer to the GICv2 operations
+ * @params:		address of a pointer to HW-specific parameters
  *
  * Returns 0 if a GICv2 has been found, with the low level operations
  * in *ops and the HW parameters in *params. Returns an error code
  * otherwise.
  */
-int vgic_v2_probe(struct device_node *vgic_node,
-		  const struct vgic_ops **ops,
-		  const struct vgic_params **params)
+int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
+		   const struct vgic_ops **ops,
+		   const struct vgic_params **params)
 {
 	int ret;
-	struct resource vctrl_res;
-	struct resource vcpu_res;
 	struct vgic_params *vgic = &vgic_v2_params;
+	const struct resource *vctrl_res = &gic_kvm_info->vctrl;
+	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
 
-	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
-	if (!vgic->maint_irq) {
-		kvm_err("error getting vgic maintenance irq from DT\n");
+	if (!gic_kvm_info->maint_irq) {
+		kvm_err("error getting vgic maintenance irq\n");
 		ret = -ENXIO;
 		goto out;
 	}
+	vgic->maint_irq = gic_kvm_info->maint_irq;
 
-	ret = of_address_to_resource(vgic_node, 2, &vctrl_res);
-	if (ret) {
-		kvm_err("Cannot obtain GICH resource\n");
+	if (!gic_kvm_info->vctrl.start) {
+		kvm_err("GICH not present in the firmware table\n");
+		ret = -ENXIO;
 		goto out;
 	}
 
-	vgic->vctrl_base = of_iomap(vgic_node, 2);
+	vgic->vctrl_base = ioremap(gic_kvm_info->vctrl.start,
+				   resource_size(&gic_kvm_info->vctrl));
 	if (!vgic->vctrl_base) {
 		kvm_err("Cannot ioremap GICH\n");
 		ret = -ENOMEM;
@@ -228,29 +226,23 @@ int vgic_v2_probe(struct device_node *vgic_node,
 	vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
 
 	ret = create_hyp_io_mappings(vgic->vctrl_base,
-				     vgic->vctrl_base + resource_size(&vctrl_res),
-				     vctrl_res.start);
+				     vgic->vctrl_base + resource_size(vctrl_res),
+				     vctrl_res->start);
 	if (ret) {
 		kvm_err("Cannot map VCTRL into hyp\n");
 		goto out_unmap;
 	}
 
-	if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
-		kvm_err("Cannot obtain GICV resource\n");
-		ret = -ENXIO;
-		goto out_unmap;
-	}
-
-	if (!PAGE_ALIGNED(vcpu_res.start)) {
+	if (!PAGE_ALIGNED(vcpu_res->start)) {
 		kvm_err("GICV physical address 0x%llx not page aligned\n",
-			(unsigned long long)vcpu_res.start);
+			(unsigned long long)vcpu_res->start);
 		ret = -ENXIO;
 		goto out_unmap;
 	}
 
-	if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
+	if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
 		kvm_err("GICV size 0x%llx not a multiple of page size 0x%lx\n",
-			(unsigned long long)resource_size(&vcpu_res),
+			(unsigned long long)resource_size(vcpu_res),
 			PAGE_SIZE);
 		ret = -ENXIO;
 		goto out_unmap;
@@ -259,10 +251,10 @@ int vgic_v2_probe(struct device_node *vgic_node,
 	vgic->can_emulate_gicv2 = true;
 	kvm_register_device_ops(&kvm_arm_vgic_v2_ops, KVM_DEV_TYPE_ARM_VGIC_V2);
 
-	vgic->vcpu_base = vcpu_res.start;
+	vgic->vcpu_base = vcpu_res->start;
 
-	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
-		 vctrl_res.start, vgic->maint_irq);
+	kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
+		 gic_kvm_info->vctrl.start, vgic->vcpu_base, vgic->maint_irq);
 
 	vgic->type = VGIC_V2;
 	vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;
@@ -276,6 +268,5 @@ int vgic_v2_probe(struct device_node *vgic_node,
 out_unmap:
 	iounmap(vgic->vctrl_base);
 out:
-	of_node_put(vgic_node);
 	return ret;
 }
diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
index 999bdc6..c02a1b1 100644
--- a/virt/kvm/arm/vgic-v3.c
+++ b/virt/kvm/arm/vgic-v3.c
@@ -20,11 +20,9 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 
 #include <linux/irqchip/arm-gic-v3.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_arm.h>
@@ -222,30 +220,24 @@ static void vgic_cpu_init_lrs(void *params)
 }
 
 /**
- * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT
- * @node:	pointer to the DT node
- * @ops: 	address of a pointer to the GICv3 operations
- * @params:	address of a pointer to HW-specific parameters
+ * vgic_v3_probe - probe for a GICv3 compatible interrupt controller
+ * @gic_kvm_info:	pointer to the GIC description
+ * @ops:		address of a pointer to the GICv3 operations
+ * @params:		address of a pointer to HW-specific parameters
  *
  * Returns 0 if a GICv3 has been found, with the low level operations
  * in *ops and the HW parameters in *params. Returns an error code
  * otherwise.
  */
-int vgic_v3_probe(struct device_node *vgic_node,
+int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params)
 {
 	int ret = 0;
-	u32 gicv_idx;
-	struct resource vcpu_res;
 	struct vgic_params *vgic = &vgic_v3_params;
+	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
 
-	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
-	if (!vgic->maint_irq) {
-		kvm_err("error getting vgic maintenance irq from DT\n");
-		ret = -ENXIO;
-		goto out;
-	}
+	vgic->maint_irq = gic_kvm_info->maint_irq;
 
 	ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2);
 
@@ -256,24 +248,19 @@ int vgic_v3_probe(struct device_node *vgic_node,
 	vgic->nr_lr = (ich_vtr_el2 & 0xf) + 1;
 	vgic->can_emulate_gicv2 = false;
 
-	if (of_property_read_u32(vgic_node, "#redistributor-regions", &gicv_idx))
-		gicv_idx = 1;
-
-	gicv_idx += 3; /* Also skip GICD, GICC, GICH */
-	if (of_address_to_resource(vgic_node, gicv_idx, &vcpu_res)) {
+	if (!vcpu_res->start) {
 		kvm_info("GICv3: no GICV resource entry\n");
 		vgic->vcpu_base = 0;
-	} else if (!PAGE_ALIGNED(vcpu_res.start)) {
+	} else if (!PAGE_ALIGNED(vcpu_res->start)) {
 		pr_warn("GICV physical address 0x%llx not page aligned\n",
-			(unsigned long long)vcpu_res.start);
+			(unsigned long long)vcpu_res->start);
 		vgic->vcpu_base = 0;
-	} else if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
+	} else if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
 		pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n",
-			(unsigned long long)resource_size(&vcpu_res),
+			(unsigned long long)resource_size(vcpu_res),
 			PAGE_SIZE);
-		vgic->vcpu_base = 0;
 	} else {
-		vgic->vcpu_base = vcpu_res.start;
+		vgic->vcpu_base = vcpu_res->start;
 		vgic->can_emulate_gicv2 = true;
 		kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
 					KVM_DEV_TYPE_ARM_VGIC_V2);
@@ -286,15 +273,13 @@ int vgic_v3_probe(struct device_node *vgic_node,
 	vgic->type = VGIC_V3;
 	vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
 
-	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
-		 vcpu_res.start, vgic->maint_irq);
+	kvm_info("GICV base=0x%llx, IRQ=%d\n",
+		 vgic->vcpu_base, vgic->maint_irq);
 
 	on_each_cpu(vgic_cpu_init_lrs, vgic, 1);
 
 	*ops = &vgic_v3_ops;
 	*params = vgic;
 
-out:
-	of_node_put(vgic_node);
 	return ret;
 }
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 00429b3..60668a7 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -21,9 +21,7 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
+#include <linux/irq.h>
 #include <linux/rculist.h>
 #include <linux/uaccess.h>
 
@@ -33,6 +31,7 @@
 #include <trace/events/kvm.h>
 #include <asm/kvm.h>
 #include <kvm/iodev.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
@@ -2389,33 +2388,38 @@ static struct notifier_block vgic_cpu_nb = {
 	.notifier_call = vgic_cpu_notify,
 };
 
-static const struct of_device_id vgic_ids[] = {
-	{ .compatible = "arm,cortex-a15-gic",	.data = vgic_v2_probe, },
-	{ .compatible = "arm,cortex-a7-gic",	.data = vgic_v2_probe, },
-	{ .compatible = "arm,gic-400",		.data = vgic_v2_probe, },
-	{ .compatible = "arm,gic-v3",		.data = vgic_v3_probe, },
-	{},
-};
-
-int kvm_vgic_hyp_init(void)
+static int kvm_vgic_probe(void)
 {
-	const struct of_device_id *matched_id;
-	const int (*vgic_probe)(struct device_node *,const struct vgic_ops **,
-				const struct vgic_params **);
-	struct device_node *vgic_node;
+	const struct gic_kvm_info *gic_kvm_info;
 	int ret;
 
-	vgic_node = of_find_matching_node_and_match(NULL,
-						    vgic_ids, &matched_id);
-	if (!vgic_node) {
-		kvm_err("error: no compatible GIC node found\n");
+	gic_kvm_info = gic_get_kvm_info();
+	if (!gic_kvm_info)
 		return -ENODEV;
+
+	switch (gic_kvm_info->type) {
+	case GIC_V2:
+		ret = vgic_v2_probe(gic_kvm_info, &vgic_ops, &vgic);
+		break;
+	case GIC_V3:
+		ret = vgic_v3_probe(gic_kvm_info, &vgic_ops, &vgic);
+		break;
+	default:
+		ret = -ENODEV;
 	}
 
-	vgic_probe = matched_id->data;
-	ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
-	if (ret)
+	return ret;
+}
+
+int kvm_vgic_hyp_init(void)
+{
+	int ret;
+
+	ret = kvm_vgic_probe();
+	if (ret) {
+		kvm_err("error: KVM vGIC probing failed\n");
 		return ret;
+	}
 
 	ret = request_percpu_irq(vgic->maint_irq, vgic_maintenance_handler,
 				 "vgic", kvm_get_running_vcpus());
-- 
1.9.1

[PATCH v6 09/10] KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware tables

[Julien Grall]

Currently, the firmware tables are parsed 2 times: once in the GIC
drivers, the other time when initializing the vGIC. It means code
duplication and make more tedious to add the support for another
firmware table (like ACPI).

Use the recently introduced helper gic_get_kvm_info() to get
information about the virtual GIC.

With this change, the virtual GIC becomes agnostic to the firmware
table and KVM will be able to initialize the vGIC on ACPI.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>

    Changes in v6:
        - Add Christoffer's reviewed-by

    Changes in v4:
        - Remove validation check as they are already done during
        parsing.
        - Move the alignement check from the parsing to the vGIC code.
        - Fix typo in the commit message

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl.
---
 include/kvm/arm_vgic.h |  7 +++---
 virt/kvm/arm/vgic-v2.c | 61 +++++++++++++++++++++-----------------------------
 virt/kvm/arm/vgic-v3.c | 47 +++++++++++++-------------------------
 virt/kvm/arm/vgic.c    | 50 ++++++++++++++++++++++-------------------
 4 files changed, 73 insertions(+), 92 deletions(-)

diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 281caf8..be6037a 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -25,6 +25,7 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include <kvm/iodev.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #define VGIC_NR_IRQS_LEGACY	256
 #define VGIC_NR_SGIS		16
@@ -353,15 +354,15 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
 #define vgic_initialized(k)	(!!((k)->arch.vgic.nr_cpus))
 #define vgic_ready(k)		((k)->arch.vgic.ready)
 
-int vgic_v2_probe(struct device_node *vgic_node,
+int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params);
 #ifdef CONFIG_KVM_ARM_VGIC_V3
-int vgic_v3_probe(struct device_node *vgic_node,
+int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params);
 #else
-static inline int vgic_v3_probe(struct device_node *vgic_node,
+static inline int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 				const struct vgic_ops **ops,
 				const struct vgic_params **params)
 {
diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
index 67ec334..7e826c9 100644
--- a/virt/kvm/arm/vgic-v2.c
+++ b/virt/kvm/arm/vgic-v2.c
@@ -20,9 +20,6 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 
 #include <linux/irqchip/arm-gic.h>
 
@@ -186,38 +183,39 @@ static void vgic_cpu_init_lrs(void *params)
 }
 
 /**
- * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT
- * @node:	pointer to the DT node
- * @ops: 	address of a pointer to the GICv2 operations
- * @params:	address of a pointer to HW-specific parameters
+ * vgic_v2_probe - probe for a GICv2 compatible interrupt controller
+ * @gic_kvm_info:	pointer to the GIC description
+ * @ops:		address of a pointer to the GICv2 operations
+ * @params:		address of a pointer to HW-specific parameters
  *
  * Returns 0 if a GICv2 has been found, with the low level operations
  * in *ops and the HW parameters in *params. Returns an error code
  * otherwise.
  */
-int vgic_v2_probe(struct device_node *vgic_node,
-		  const struct vgic_ops **ops,
-		  const struct vgic_params **params)
+int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
+		   const struct vgic_ops **ops,
+		   const struct vgic_params **params)
 {
 	int ret;
-	struct resource vctrl_res;
-	struct resource vcpu_res;
 	struct vgic_params *vgic = &vgic_v2_params;
+	const struct resource *vctrl_res = &gic_kvm_info->vctrl;
+	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
 
-	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
-	if (!vgic->maint_irq) {
-		kvm_err("error getting vgic maintenance irq from DT\n");
+	if (!gic_kvm_info->maint_irq) {
+		kvm_err("error getting vgic maintenance irq\n");
 		ret = -ENXIO;
 		goto out;
 	}
+	vgic->maint_irq = gic_kvm_info->maint_irq;
 
-	ret = of_address_to_resource(vgic_node, 2, &vctrl_res);
-	if (ret) {
-		kvm_err("Cannot obtain GICH resource\n");
+	if (!gic_kvm_info->vctrl.start) {
+		kvm_err("GICH not present in the firmware table\n");
+		ret = -ENXIO;
 		goto out;
 	}
 
-	vgic->vctrl_base = of_iomap(vgic_node, 2);
+	vgic->vctrl_base = ioremap(gic_kvm_info->vctrl.start,
+				   resource_size(&gic_kvm_info->vctrl));
 	if (!vgic->vctrl_base) {
 		kvm_err("Cannot ioremap GICH\n");
 		ret = -ENOMEM;
@@ -228,29 +226,23 @@ int vgic_v2_probe(struct device_node *vgic_node,
 	vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
 
 	ret = create_hyp_io_mappings(vgic->vctrl_base,
-				     vgic->vctrl_base + resource_size(&vctrl_res),
-				     vctrl_res.start);
+				     vgic->vctrl_base + resource_size(vctrl_res),
+				     vctrl_res->start);
 	if (ret) {
 		kvm_err("Cannot map VCTRL into hyp\n");
 		goto out_unmap;
 	}
 
-	if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
-		kvm_err("Cannot obtain GICV resource\n");
-		ret = -ENXIO;
-		goto out_unmap;
-	}
-
-	if (!PAGE_ALIGNED(vcpu_res.start)) {
+	if (!PAGE_ALIGNED(vcpu_res->start)) {
 		kvm_err("GICV physical address 0x%llx not page aligned\n",
-			(unsigned long long)vcpu_res.start);
+			(unsigned long long)vcpu_res->start);
 		ret = -ENXIO;
 		goto out_unmap;
 	}
 
-	if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
+	if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
 		kvm_err("GICV size 0x%llx not a multiple of page size 0x%lx\n",
-			(unsigned long long)resource_size(&vcpu_res),
+			(unsigned long long)resource_size(vcpu_res),
 			PAGE_SIZE);
 		ret = -ENXIO;
 		goto out_unmap;
@@ -259,10 +251,10 @@ int vgic_v2_probe(struct device_node *vgic_node,
 	vgic->can_emulate_gicv2 = true;
 	kvm_register_device_ops(&kvm_arm_vgic_v2_ops, KVM_DEV_TYPE_ARM_VGIC_V2);
 
-	vgic->vcpu_base = vcpu_res.start;
+	vgic->vcpu_base = vcpu_res->start;
 
-	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
-		 vctrl_res.start, vgic->maint_irq);
+	kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
+		 gic_kvm_info->vctrl.start, vgic->vcpu_base, vgic->maint_irq);
 
 	vgic->type = VGIC_V2;
 	vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;
@@ -276,6 +268,5 @@ int vgic_v2_probe(struct device_node *vgic_node,
 out_unmap:
 	iounmap(vgic->vctrl_base);
 out:
-	of_node_put(vgic_node);
 	return ret;
 }
diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
index 999bdc6..c02a1b1 100644
--- a/virt/kvm/arm/vgic-v3.c
+++ b/virt/kvm/arm/vgic-v3.c
@@ -20,11 +20,9 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 
 #include <linux/irqchip/arm-gic-v3.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_arm.h>
@@ -222,30 +220,24 @@ static void vgic_cpu_init_lrs(void *params)
 }
 
 /**
- * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT
- * @node:	pointer to the DT node
- * @ops: 	address of a pointer to the GICv3 operations
- * @params:	address of a pointer to HW-specific parameters
+ * vgic_v3_probe - probe for a GICv3 compatible interrupt controller
+ * @gic_kvm_info:	pointer to the GIC description
+ * @ops:		address of a pointer to the GICv3 operations
+ * @params:		address of a pointer to HW-specific parameters
  *
  * Returns 0 if a GICv3 has been found, with the low level operations
  * in *ops and the HW parameters in *params. Returns an error code
  * otherwise.
  */
-int vgic_v3_probe(struct device_node *vgic_node,
+int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
 		  const struct vgic_ops **ops,
 		  const struct vgic_params **params)
 {
 	int ret = 0;
-	u32 gicv_idx;
-	struct resource vcpu_res;
 	struct vgic_params *vgic = &vgic_v3_params;
+	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
 
-	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
-	if (!vgic->maint_irq) {
-		kvm_err("error getting vgic maintenance irq from DT\n");
-		ret = -ENXIO;
-		goto out;
-	}
+	vgic->maint_irq = gic_kvm_info->maint_irq;
 
 	ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2);
 
@@ -256,24 +248,19 @@ int vgic_v3_probe(struct device_node *vgic_node,
 	vgic->nr_lr = (ich_vtr_el2 & 0xf) + 1;
 	vgic->can_emulate_gicv2 = false;
 
-	if (of_property_read_u32(vgic_node, "#redistributor-regions", &gicv_idx))
-		gicv_idx = 1;
-
-	gicv_idx += 3; /* Also skip GICD, GICC, GICH */
-	if (of_address_to_resource(vgic_node, gicv_idx, &vcpu_res)) {
+	if (!vcpu_res->start) {
 		kvm_info("GICv3: no GICV resource entry\n");
 		vgic->vcpu_base = 0;
-	} else if (!PAGE_ALIGNED(vcpu_res.start)) {
+	} else if (!PAGE_ALIGNED(vcpu_res->start)) {
 		pr_warn("GICV physical address 0x%llx not page aligned\n",
-			(unsigned long long)vcpu_res.start);
+			(unsigned long long)vcpu_res->start);
 		vgic->vcpu_base = 0;
-	} else if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
+	} else if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
 		pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n",
-			(unsigned long long)resource_size(&vcpu_res),
+			(unsigned long long)resource_size(vcpu_res),
 			PAGE_SIZE);
-		vgic->vcpu_base = 0;
 	} else {
-		vgic->vcpu_base = vcpu_res.start;
+		vgic->vcpu_base = vcpu_res->start;
 		vgic->can_emulate_gicv2 = true;
 		kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
 					KVM_DEV_TYPE_ARM_VGIC_V2);
@@ -286,15 +273,13 @@ int vgic_v3_probe(struct device_node *vgic_node,
 	vgic->type = VGIC_V3;
 	vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
 
-	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
-		 vcpu_res.start, vgic->maint_irq);
+	kvm_info("GICV base=0x%llx, IRQ=%d\n",
+		 vgic->vcpu_base, vgic->maint_irq);
 
 	on_each_cpu(vgic_cpu_init_lrs, vgic, 1);
 
 	*ops = &vgic_v3_ops;
 	*params = vgic;
 
-out:
-	of_node_put(vgic_node);
 	return ret;
 }
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 00429b3..60668a7 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -21,9 +21,7 @@
 #include <linux/kvm_host.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
+#include <linux/irq.h>
 #include <linux/rculist.h>
 #include <linux/uaccess.h>
 
@@ -33,6 +31,7 @@
 #include <trace/events/kvm.h>
 #include <asm/kvm.h>
 #include <kvm/iodev.h>
+#include <linux/irqchip/arm-gic-common.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
@@ -2389,33 +2388,38 @@ static struct notifier_block vgic_cpu_nb = {
 	.notifier_call = vgic_cpu_notify,
 };
 
-static const struct of_device_id vgic_ids[] = {
-	{ .compatible = "arm,cortex-a15-gic",	.data = vgic_v2_probe, },
-	{ .compatible = "arm,cortex-a7-gic",	.data = vgic_v2_probe, },
-	{ .compatible = "arm,gic-400",		.data = vgic_v2_probe, },
-	{ .compatible = "arm,gic-v3",		.data = vgic_v3_probe, },
-	{},
-};
-
-int kvm_vgic_hyp_init(void)
+static int kvm_vgic_probe(void)
 {
-	const struct of_device_id *matched_id;
-	const int (*vgic_probe)(struct device_node *,const struct vgic_ops **,
-				const struct vgic_params **);
-	struct device_node *vgic_node;
+	const struct gic_kvm_info *gic_kvm_info;
 	int ret;
 
-	vgic_node = of_find_matching_node_and_match(NULL,
-						    vgic_ids, &matched_id);
-	if (!vgic_node) {
-		kvm_err("error: no compatible GIC node found\n");
+	gic_kvm_info = gic_get_kvm_info();
+	if (!gic_kvm_info)
 		return -ENODEV;
+
+	switch (gic_kvm_info->type) {
+	case GIC_V2:
+		ret = vgic_v2_probe(gic_kvm_info, &vgic_ops, &vgic);
+		break;
+	case GIC_V3:
+		ret = vgic_v3_probe(gic_kvm_info, &vgic_ops, &vgic);
+		break;
+	default:
+		ret = -ENODEV;
 	}
 
-	vgic_probe = matched_id->data;
-	ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
-	if (ret)
+	return ret;
+}
+
+int kvm_vgic_hyp_init(void)
+{
+	int ret;
+
+	ret = kvm_vgic_probe();
+	if (ret) {
+		kvm_err("error: KVM vGIC probing failed\n");
 		return ret;
+	}
 
 	ret = request_percpu_irq(vgic->maint_irq, vgic_maintenance_handler,
 				 "vgic", kvm_get_running_vcpus());
-- 
1.9.1

[PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Julien Grall]

The only call of arch_timer_get_timecounter (in KVM) has been removed.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>

    Changes in v4:
        - Add Christoffer's acked-by

    Changes in v3:
        - Patch added
---
 drivers/clocksource/arm_arch_timer.c | 5 -----
 include/clocksource/arm_arch_timer.h | 6 ------
 2 files changed, 11 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index bb58224..4814446 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -475,11 +475,6 @@ struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
 	return &arch_timer_kvm_info;
 }
 
-struct timecounter *arch_timer_get_timecounter(void)
-{
-	return &arch_timer_kvm_info.timecounter;
-}
-
 static void __init arch_counter_register(unsigned type)
 {
 	u64 start_count;
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 9dd996a..caedb74 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -58,7 +58,6 @@ struct arch_timer_kvm_info {
 
 extern u32 arch_timer_get_rate(void);
 extern u64 (*arch_timer_read_counter)(void);
-extern struct timecounter *arch_timer_get_timecounter(void);
 extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
 
 #else
@@ -73,11 +72,6 @@ static inline u64 arch_timer_read_counter(void)
 	return 0;
 }
 
-static inline struct timecounter *arch_timer_get_timecounter(void)
-{
-	return NULL;
-}
-
 #endif
 
 #endif
-- 
1.9.1

[PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Julien Grall]

The only call of arch_timer_get_timecounter (in KVM) has been removed.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>

    Changes in v4:
        - Add Christoffer's acked-by

    Changes in v3:
        - Patch added
---
 drivers/clocksource/arm_arch_timer.c | 5 -----
 include/clocksource/arm_arch_timer.h | 6 ------
 2 files changed, 11 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index bb58224..4814446 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -475,11 +475,6 @@ struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
 	return &arch_timer_kvm_info;
 }
 
-struct timecounter *arch_timer_get_timecounter(void)
-{
-	return &arch_timer_kvm_info.timecounter;
-}
-
 static void __init arch_counter_register(unsigned type)
 {
 	u64 start_count;
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 9dd996a..caedb74 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -58,7 +58,6 @@ struct arch_timer_kvm_info {
 
 extern u32 arch_timer_get_rate(void);
 extern u64 (*arch_timer_read_counter)(void);
-extern struct timecounter *arch_timer_get_timecounter(void);
 extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
 
 #else
@@ -73,11 +72,6 @@ static inline u64 arch_timer_read_counter(void)
 	return 0;
 }
 
-static inline struct timecounter *arch_timer_get_timecounter(void)
-{
-	return NULL;
-}
-
 #endif
 
 #endif
-- 
1.9.1

[PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Julien Grall]

The only call of arch_timer_get_timecounter (in KVM) has been removed.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

---
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>

    Changes in v4:
        - Add Christoffer's acked-by

    Changes in v3:
        - Patch added
---
 drivers/clocksource/arm_arch_timer.c | 5 -----
 include/clocksource/arm_arch_timer.h | 6 ------
 2 files changed, 11 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index bb58224..4814446 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -475,11 +475,6 @@ struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
 	return &arch_timer_kvm_info;
 }
 
-struct timecounter *arch_timer_get_timecounter(void)
-{
-	return &arch_timer_kvm_info.timecounter;
-}
-
 static void __init arch_counter_register(unsigned type)
 {
 	u64 start_count;
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 9dd996a..caedb74 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -58,7 +58,6 @@ struct arch_timer_kvm_info {
 
 extern u32 arch_timer_get_rate(void);
 extern u64 (*arch_timer_read_counter)(void);
-extern struct timecounter *arch_timer_get_timecounter(void);
 extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
 
 #else
@@ -73,11 +72,6 @@ static inline u64 arch_timer_read_counter(void)
 	return 0;
 }
 
-static inline struct timecounter *arch_timer_get_timecounter(void)
-{
-	return NULL;
-}
-
 #endif
 
 #endif
-- 
1.9.1

Re: [PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Daniel Lezcano]

On Mon, Apr 11, 2016 at 04:32:51PM +0100, Julien Grall wrote:
> Introduce a structure which are filled up by the arch timer driver and
> used by the virtual timer in KVM.
> 
> The first member of this structure will be the timecounter. More members
> will be added later.
> 
> A stub for the new helper isn't introduced because KVM requires the arch
> timer for both ARM64 and ARM32.
> 
> The function arch_timer_get_timecounter is kept for the time being and
> will be dropped in a subsequent patch.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> 

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Re: [PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Daniel Lezcano]

On Mon, Apr 11, 2016 at 04:32:51PM +0100, Julien Grall wrote:
> Introduce a structure which are filled up by the arch timer driver and
> used by the virtual timer in KVM.
> 
> The first member of this structure will be the timecounter. More members
> will be added later.
> 
> A stub for the new helper isn't introduced because KVM requires the arch
> timer for both ARM64 and ARM32.
> 
> The function arch_timer_get_timecounter is kept for the time being and
> will be dropped in a subsequent patch.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> 

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

[PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Daniel Lezcano]

On Mon, Apr 11, 2016 at 04:32:51PM +0100, Julien Grall wrote:
> Introduce a structure which are filled up by the arch timer driver and
> used by the virtual timer in KVM.
> 
> The first member of this structure will be the timecounter. More members
> will be added later.
> 
> A stub for the new helper isn't introduced because KVM requires the arch
> timer for both ARM64 and ARM32.
> 
> The function arch_timer_get_timecounter is kept for the time being and
> will be dropped in a subsequent patch.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> 

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Re: [PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Daniel Lezcano]

On Mon, Apr 11, 2016 at 04:32:52PM +0100, Julien Grall wrote:
> Currently, the firmware table is parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
> 
> To avoid code duplication, extend arch_timer_kvm_info to get the virtual
> IRQ.
> 
> Note that the KVM code will be modified in a subsequent patch.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> 
> ---

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Re: [PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Daniel Lezcano]

On Mon, Apr 11, 2016 at 04:32:52PM +0100, Julien Grall wrote:
> Currently, the firmware table is parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
> 
> To avoid code duplication, extend arch_timer_kvm_info to get the virtual
> IRQ.
> 
> Note that the KVM code will be modified in a subsequent patch.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> 
> ---

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

[PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Daniel Lezcano]

On Mon, Apr 11, 2016 at 04:32:52PM +0100, Julien Grall wrote:
> Currently, the firmware table is parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
> 
> To avoid code duplication, extend arch_timer_kvm_info to get the virtual
> IRQ.
> 
> Note that the KVM code will be modified in a subsequent patch.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> 
> ---

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Re: [PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Daniel Lezcano]

On Mon, Apr 11, 2016 at 04:33:00PM +0100, Julien Grall wrote:
> The only call of arch_timer_get_timecounter (in KVM) has been removed.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> 
> ---
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> 
>     Changes in v4:
>         - Add Christoffer's acked-by
> 
>     Changes in v3:
>         - Patch added
> ---

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

[PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Daniel Lezcano]

On Mon, Apr 11, 2016 at 04:33:00PM +0100, Julien Grall wrote:
> The only call of arch_timer_get_timecounter (in KVM) has been removed.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> 
> ---
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> 
>     Changes in v4:
>         - Add Christoffer's acked-by
> 
>     Changes in v3:
>         - Patch added
> ---

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Re: [PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Christoffer Dall]

Hi Daniel,

On Tue, Apr 12, 2016 at 07:44:47AM +0200, Daniel Lezcano wrote:
> On Mon, Apr 11, 2016 at 04:33:00PM +0100, Julien Grall wrote:
> > The only call of arch_timer_get_timecounter (in KVM) has been removed.
> > 
> > Signed-off-by: Julien Grall <julien.grall@arm.com>
> > Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> > 
> > ---
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > 
> >     Changes in v4:
> >         - Add Christoffer's acked-by
> > 
> >     Changes in v3:
> >         - Patch added
> > ---
> 
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

having acked these, do you want us to just take this a complete series
via the kvmarm tree or do you plan on merging the patches individually?

Thanks,
-Christoffer

Re: [PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Christoffer Dall]

Hi Daniel,

On Tue, Apr 12, 2016 at 07:44:47AM +0200, Daniel Lezcano wrote:
> On Mon, Apr 11, 2016 at 04:33:00PM +0100, Julien Grall wrote:
> > The only call of arch_timer_get_timecounter (in KVM) has been removed.
> > 
> > Signed-off-by: Julien Grall <julien.grall@arm.com>
> > Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> > 
> > ---
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > 
> >     Changes in v4:
> >         - Add Christoffer's acked-by
> > 
> >     Changes in v3:
> >         - Patch added
> > ---
> 
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

having acked these, do you want us to just take this a complete series
via the kvmarm tree or do you plan on merging the patches individually?

Thanks,
-Christoffer

[PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Christoffer Dall]

Hi Daniel,

On Tue, Apr 12, 2016 at 07:44:47AM +0200, Daniel Lezcano wrote:
> On Mon, Apr 11, 2016 at 04:33:00PM +0100, Julien Grall wrote:
> > The only call of arch_timer_get_timecounter (in KVM) has been removed.
> > 
> > Signed-off-by: Julien Grall <julien.grall@arm.com>
> > Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> > 
> > ---
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > 
> >     Changes in v4:
> >         - Add Christoffer's acked-by
> > 
> >     Changes in v3:
> >         - Patch added
> > ---
> 
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

having acked these, do you want us to just take this a complete series
via the kvmarm tree or do you plan on merging the patches individually?

Thanks,
-Christoffer

Re: [PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Daniel Lezcano]

On 04/12/2016 02:15 PM, Christoffer Dall wrote:
> Hi Daniel,
>
> On Tue, Apr 12, 2016 at 07:44:47AM +0200, Daniel Lezcano wrote:
>> On Mon, Apr 11, 2016 at 04:33:00PM +0100, Julien Grall wrote:
>>> The only call of arch_timer_get_timecounter (in KVM) has been removed.
>>>
>>> Signed-off-by: Julien Grall <julien.grall@arm.com>
>>> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>>>
>>> ---
>>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>>
>>>      Changes in v4:
>>>          - Add Christoffer's acked-by
>>>
>>>      Changes in v3:
>>>          - Patch added
>>> ---
>>
>> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>
> having acked these, do you want us to just take this a complete series
> via the kvmarm tree or do you plan on merging the patches individually?

Just take it via the kvmarm tree.

   -- Daniel


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Daniel Lezcano]

On 04/12/2016 02:15 PM, Christoffer Dall wrote:
> Hi Daniel,
>
> On Tue, Apr 12, 2016 at 07:44:47AM +0200, Daniel Lezcano wrote:
>> On Mon, Apr 11, 2016 at 04:33:00PM +0100, Julien Grall wrote:
>>> The only call of arch_timer_get_timecounter (in KVM) has been removed.
>>>
>>> Signed-off-by: Julien Grall <julien.grall@arm.com>
>>> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>>>
>>> ---
>>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>>
>>>      Changes in v4:
>>>          - Add Christoffer's acked-by
>>>
>>>      Changes in v3:
>>>          - Patch added
>>> ---
>>
>> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>
> having acked these, do you want us to just take this a complete series
> via the kvmarm tree or do you plan on merging the patches individually?

Just take it via the kvmarm tree.

   -- Daniel


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Daniel Lezcano]

On 04/12/2016 02:15 PM, Christoffer Dall wrote:
> Hi Daniel,
>
> On Tue, Apr 12, 2016 at 07:44:47AM +0200, Daniel Lezcano wrote:
>> On Mon, Apr 11, 2016 at 04:33:00PM +0100, Julien Grall wrote:
>>> The only call of arch_timer_get_timecounter (in KVM) has been removed.
>>>
>>> Signed-off-by: Julien Grall <julien.grall@arm.com>
>>> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>>>
>>> ---
>>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>>
>>>      Changes in v4:
>>>          - Add Christoffer's acked-by
>>>
>>>      Changes in v3:
>>>          - Patch added
>>> ---
>>
>> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>
> having acked these, do you want us to just take this a complete series
> via the kvmarm tree or do you plan on merging the patches individually?

Just take it via the kvmarm tree.

   -- Daniel


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Hanjun Guo]

On 2016/4/11 23:32, Julien Grall wrote:
> For now, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other timer when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Introduce a new structure and set of helpers to get/set the virtual GIC
> information. Also fill up the structure for GICv2.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>

For ACPI code,

Acked-by: Hanjun Guo <hanjun.guo@linaro.org>

Thanks
Hanjun

Re: [PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Hanjun Guo]

On 2016/4/11 23:32, Julien Grall wrote:
> For now, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other timer when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Introduce a new structure and set of helpers to get/set the virtual GIC
> information. Also fill up the structure for GICv2.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>

For ACPI code,

Acked-by: Hanjun Guo <hanjun.guo@linaro.org>

Thanks
Hanjun

[PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Hanjun Guo]

On 2016/4/11 23:32, Julien Grall wrote:
> For now, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other timer when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Introduce a new structure and set of helpers to get/set the virtual GIC
> information. Also fill up the structure for GICv2.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>

For ACPI code,

Acked-by: Hanjun Guo <hanjun.guo@linaro.org>

Thanks
Hanjun

Re: [PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Hanjun Guo]

On 2016/4/11 23:32, Julien Grall wrote:
> Currently, most of the pr_* messages in the GICv3 driver don't have a
> prefix.  Add one to make clear where the messages come from.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
>
> ---
>      Changes in v6:
>          - Patch added
> ---
>   drivers/irqchip/irq-gic-v3.c | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 5b7d3c2..6dc6f03 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -15,6 +15,8 @@
>    * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>    */
>
> +#define pr_fmt(fmt)	"GICv3: " fmt

I don't think this patch is needed, as GICv3 and GICv2 will
not be probed at the same time, did I miss something?

Further more, there are prefixes in pr_fmt in this
patch using GIC:, with your patch added, it will print:

GIV3: GIC: .....

which is not a good idea.

Thanks
Hanjun

Re: [PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Hanjun Guo]

On 2016/4/11 23:32, Julien Grall wrote:
> Currently, most of the pr_* messages in the GICv3 driver don't have a
> prefix.  Add one to make clear where the messages come from.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
>
> ---
>      Changes in v6:
>          - Patch added
> ---
>   drivers/irqchip/irq-gic-v3.c | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 5b7d3c2..6dc6f03 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -15,6 +15,8 @@
>    * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>    */
>
> +#define pr_fmt(fmt)	"GICv3: " fmt

I don't think this patch is needed, as GICv3 and GICv2 will
not be probed at the same time, did I miss something?

Further more, there are prefixes in pr_fmt in this
patch using GIC:, with your patch added, it will print:

GIV3: GIC: .....

which is not a good idea.

Thanks
Hanjun

[PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Hanjun Guo]

On 2016/4/11 23:32, Julien Grall wrote:
> Currently, most of the pr_* messages in the GICv3 driver don't have a
> prefix.  Add one to make clear where the messages come from.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
>
> ---
>      Changes in v6:
>          - Patch added
> ---
>   drivers/irqchip/irq-gic-v3.c | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 5b7d3c2..6dc6f03 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -15,6 +15,8 @@
>    * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>    */
>
> +#define pr_fmt(fmt)	"GICv3: " fmt

I don't think this patch is needed, as GICv3 and GICv2 will
not be probed at the same time, did I miss something?

Further more, there are prefixes in pr_fmt in this
patch using GIC:, with your patch added, it will print:

GIV3: GIC: .....

which is not a good idea.

Thanks
Hanjun

Re: [PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Introduce a structure which are filled up by the arch timer driver and
> used by the virtual timer in KVM.
>
> The first member of this structure will be the timecounter. More members
> will be added later.
>
> A stub for the new helper isn't introduced because KVM requires the arch
> timer for both ARM64 and ARM32.
>
> The function arch_timer_get_timecounter is kept for the time being and
> will be dropped in a subsequent patch.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.
> ---
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
>
>     Changes in v6:
>         - Add Christoffer's acked-by
>
>     Changes in v3:
>         - Rename the patch
>         - Move the KVM changes and removal of arch_timer_get_timecounter
>         in separate patches.
> ---
>  drivers/clocksource/arm_arch_timer.c | 12 +++++++++---
>  include/clocksource/arm_arch_timer.h |  5 +++++
>  2 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clocksource/arm_arch_timer.c
> b/drivers/clocksource/arm_arch_timer.c
> index 5152b38..62bdfe7 100644
> --- a/drivers/clocksource/arm_arch_timer.c
> +++ b/drivers/clocksource/arm_arch_timer.c
> @@ -468,11 +468,16 @@ static struct cyclecounter cyclecounter = {
>  	.mask	= CLOCKSOURCE_MASK(56),
>  };
>  
> -static struct timecounter timecounter;
> +static struct arch_timer_kvm_info arch_timer_kvm_info;
> +
> +struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
> +{
> +	return &arch_timer_kvm_info;
> +}
>  
>  struct timecounter *arch_timer_get_timecounter(void)
>  {
> -	return &timecounter;
> +	return &arch_timer_kvm_info.timecounter;
>  }
>  
>  static void __init arch_counter_register(unsigned type)
> @@ -500,7 +505,8 @@ static void __init arch_counter_register(unsigned
> type)
>  	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
>  	cyclecounter.mult = clocksource_counter.mult;
>  	cyclecounter.shift = clocksource_counter.shift;
> -	timecounter_init(&timecounter, &cyclecounter, start_count);
> +	timecounter_init(&arch_timer_kvm_info.timecounter,
> +			 &cyclecounter, start_count);
>  
>  	/* 56 bits minimum, so we assume worst case rollover */
>  	sched_clock_register(arch_timer_read_counter, 56,
> arch_timer_rate);
> diff --git a/include/clocksource/arm_arch_timer.h
> b/include/clocksource/arm_arch_timer.h
> index 25d0914..9101ed6b 100644
> --- a/include/clocksource/arm_arch_timer.h
> +++ b/include/clocksource/arm_arch_timer.h
> @@ -49,11 +49,16 @@ enum arch_timer_reg {
>  
>  #define ARCH_TIMER_EVT_STREAM_FREQ	10000	/* 100us */
>  
> +struct arch_timer_kvm_info {
> +	struct timecounter timecounter;
> +};
> +
>  #ifdef CONFIG_ARM_ARCH_TIMER
>  
>  extern u32 arch_timer_get_rate(void);
>  extern u64 (*arch_timer_read_counter)(void);
>  extern struct timecounter *arch_timer_get_timecounter(void);
> +extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
>  
>  #else
>  

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Introduce a structure which are filled up by the arch timer driver and
> used by the virtual timer in KVM.
>
> The first member of this structure will be the timecounter. More members
> will be added later.
>
> A stub for the new helper isn't introduced because KVM requires the arch
> timer for both ARM64 and ARM32.
>
> The function arch_timer_get_timecounter is kept for the time being and
> will be dropped in a subsequent patch.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.
> ---
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
>
>     Changes in v6:
>         - Add Christoffer's acked-by
>
>     Changes in v3:
>         - Rename the patch
>         - Move the KVM changes and removal of arch_timer_get_timecounter
>         in separate patches.
> ---
>  drivers/clocksource/arm_arch_timer.c | 12 +++++++++---
>  include/clocksource/arm_arch_timer.h |  5 +++++
>  2 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clocksource/arm_arch_timer.c
> b/drivers/clocksource/arm_arch_timer.c
> index 5152b38..62bdfe7 100644
> --- a/drivers/clocksource/arm_arch_timer.c
> +++ b/drivers/clocksource/arm_arch_timer.c
> @@ -468,11 +468,16 @@ static struct cyclecounter cyclecounter = {
>  	.mask	= CLOCKSOURCE_MASK(56),
>  };
>  
> -static struct timecounter timecounter;
> +static struct arch_timer_kvm_info arch_timer_kvm_info;
> +
> +struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
> +{
> +	return &arch_timer_kvm_info;
> +}
>  
>  struct timecounter *arch_timer_get_timecounter(void)
>  {
> -	return &timecounter;
> +	return &arch_timer_kvm_info.timecounter;
>  }
>  
>  static void __init arch_counter_register(unsigned type)
> @@ -500,7 +505,8 @@ static void __init arch_counter_register(unsigned
> type)
>  	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
>  	cyclecounter.mult = clocksource_counter.mult;
>  	cyclecounter.shift = clocksource_counter.shift;
> -	timecounter_init(&timecounter, &cyclecounter, start_count);
> +	timecounter_init(&arch_timer_kvm_info.timecounter,
> +			 &cyclecounter, start_count);
>  
>  	/* 56 bits minimum, so we assume worst case rollover */
>  	sched_clock_register(arch_timer_read_counter, 56,
> arch_timer_rate);
> diff --git a/include/clocksource/arm_arch_timer.h
> b/include/clocksource/arm_arch_timer.h
> index 25d0914..9101ed6b 100644
> --- a/include/clocksource/arm_arch_timer.h
> +++ b/include/clocksource/arm_arch_timer.h
> @@ -49,11 +49,16 @@ enum arch_timer_reg {
>  
>  #define ARCH_TIMER_EVT_STREAM_FREQ	10000	/* 100us */
>  
> +struct arch_timer_kvm_info {
> +	struct timecounter timecounter;
> +};
> +
>  #ifdef CONFIG_ARM_ARCH_TIMER
>  
>  extern u32 arch_timer_get_rate(void);
>  extern u64 (*arch_timer_read_counter)(void);
>  extern struct timecounter *arch_timer_get_timecounter(void);
> +extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
>  
>  #else
>  

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 01/10] clocksource: arm_arch_timer: Gather KVM specific information in a structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Introduce a structure which are filled up by the arch timer driver and
> used by the virtual timer in KVM.
>
> The first member of this structure will be the timecounter. More members
> will be added later.
>
> A stub for the new helper isn't introduced because KVM requires the arch
> timer for both ARM64 and ARM32.
>
> The function arch_timer_get_timecounter is kept for the time being and
> will be dropped in a subsequent patch.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.
> ---
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
>
>     Changes in v6:
>         - Add Christoffer's acked-by
>
>     Changes in v3:
>         - Rename the patch
>         - Move the KVM changes and removal of arch_timer_get_timecounter
>         in separate patches.
> ---
>  drivers/clocksource/arm_arch_timer.c | 12 +++++++++---
>  include/clocksource/arm_arch_timer.h |  5 +++++
>  2 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clocksource/arm_arch_timer.c
> b/drivers/clocksource/arm_arch_timer.c
> index 5152b38..62bdfe7 100644
> --- a/drivers/clocksource/arm_arch_timer.c
> +++ b/drivers/clocksource/arm_arch_timer.c
> @@ -468,11 +468,16 @@ static struct cyclecounter cyclecounter = {
>  	.mask	= CLOCKSOURCE_MASK(56),
>  };
>  
> -static struct timecounter timecounter;
> +static struct arch_timer_kvm_info arch_timer_kvm_info;
> +
> +struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
> +{
> +	return &arch_timer_kvm_info;
> +}
>  
>  struct timecounter *arch_timer_get_timecounter(void)
>  {
> -	return &timecounter;
> +	return &arch_timer_kvm_info.timecounter;
>  }
>  
>  static void __init arch_counter_register(unsigned type)
> @@ -500,7 +505,8 @@ static void __init arch_counter_register(unsigned
> type)
>  	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
>  	cyclecounter.mult = clocksource_counter.mult;
>  	cyclecounter.shift = clocksource_counter.shift;
> -	timecounter_init(&timecounter, &cyclecounter, start_count);
> +	timecounter_init(&arch_timer_kvm_info.timecounter,
> +			 &cyclecounter, start_count);
>  
>  	/* 56 bits minimum, so we assume worst case rollover */
>  	sched_clock_register(arch_timer_read_counter, 56,
> arch_timer_rate);
> diff --git a/include/clocksource/arm_arch_timer.h
> b/include/clocksource/arm_arch_timer.h
> index 25d0914..9101ed6b 100644
> --- a/include/clocksource/arm_arch_timer.h
> +++ b/include/clocksource/arm_arch_timer.h
> @@ -49,11 +49,16 @@ enum arch_timer_reg {
>  
>  #define ARCH_TIMER_EVT_STREAM_FREQ	10000	/* 100us */
>  
> +struct arch_timer_kvm_info {
> +	struct timecounter timecounter;
> +};
> +
>  #ifdef CONFIG_ARM_ARCH_TIMER
>  
>  extern u32 arch_timer_get_rate(void);
>  extern u64 (*arch_timer_read_counter)(void);
>  extern struct timecounter *arch_timer_get_timecounter(void);
> +extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
>  
>  #else
>  

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Currently, the firmware table is parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
>
> To avoid code duplication, extend arch_timer_kvm_info to get the virtual
> IRQ.
>
> Note that the KVM code will be modified in a subsequent patch.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Currently, the firmware table is parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
>
> To avoid code duplication, extend arch_timer_kvm_info to get the virtual
> IRQ.
>
> Note that the KVM code will be modified in a subsequent patch.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 02/10] clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the virtual IRQ

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Currently, the firmware table is parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
>
> To avoid code duplication, extend arch_timer_kvm_info to get the virtual
> IRQ.
>
> Note that the KVM code will be modified in a subsequent patch.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 03/10] irqchip/gic-v2: Gather ACPI specific data in a single structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The ACPI code requires to use global variables in order to collect
> information from the tables.
>
> For now, a single global variable is used, but more will be added in a
> subsequent patch. To make clear they are ACPI specific, gather all the
> information in a single structure.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christofer Dall <christoffer.dall@linaro.org>
> Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 03/10] irqchip/gic-v2: Gather ACPI specific data in a single structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The ACPI code requires to use global variables in order to collect
> information from the tables.
>
> For now, a single global variable is used, but more will be added in a
> subsequent patch. To make clear they are ACPI specific, gather all the
> information in a single structure.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christofer Dall <christoffer.dall@linaro.org>
> Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 03/10] irqchip/gic-v2: Gather ACPI specific data in a single structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The ACPI code requires to use global variables in order to collect
> information from the tables.
>
> For now, a single global variable is used, but more will be added in a
> subsequent patch. To make clear they are ACPI specific, gather all the
> information in a single structure.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christofer Dall <christoffer.dall@linaro.org>
> Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> For now, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other timer when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Introduce a new structure and set of helpers to get/set the virtual GIC
> information. Also fill up the structure for GICv2.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> For now, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other timer when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Introduce a new structure and set of helpers to get/set the virtual GIC
> information. Also fill up the structure for GICv2.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 04/10] irqchip/gic-v2: Parse and export virtual GIC information

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> For now, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other timer when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Introduce a new structure and set of helpers to get/set the virtual GIC
> information. Also fill up the structure for GICv2.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 06/10] irqchip/gic-v3: Gather all ACPI specific data in a single structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The ACPI code requires to use global variables in order to collect
> information from the tables.
>
> To make clear those variables are ACPI specific, gather all of them in a
> single structure.
>
> Furthermore, even if some of the variables are not marked with
> __initdata, they are all only used during the initialization. Therefore,
> the new variable, which hold the structure, can be marked with
> __initdata.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 06/10] irqchip/gic-v3: Gather all ACPI specific data in a single structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The ACPI code requires to use global variables in order to collect
> information from the tables.
>
> To make clear those variables are ACPI specific, gather all of them in a
> single structure.
>
> Furthermore, even if some of the variables are not marked with
> __initdata, they are all only used during the initialization. Therefore,
> the new variable, which hold the structure, can be marked with
> __initdata.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 06/10] irqchip/gic-v3: Gather all ACPI specific data in a single structure

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The ACPI code requires to use global variables in order to collect
> information from the tables.
>
> To make clear those variables are ACPI specific, gather all of them in a
> single structure.
>
> Furthermore, even if some of the variables are not marked with
> __initdata, they are all only used during the initialization. Therefore,
> the new variable, which hold the structure, can be marked with
> __initdata.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 07/10] irqchip/gic-v3: Parse and export virtual GIC information

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Fill up the recently introduced gic_kvm_info with the hardware
> information used for virtualization.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 07/10] irqchip/gic-v3: Parse and export virtual GIC information

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Fill up the recently introduced gic_kvm_info with the hardware
> information used for virtualization.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 07/10] irqchip/gic-v3: Parse and export virtual GIC information

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> Fill up the recently introduced gic_kvm_info with the hardware
> information used for virtualization.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 08/10] KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the firmware tables

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The firmware table is currently parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
>
> To avoid code duplication, use the newly function
> arch_timer_get_kvm_info()
> which return all the information required by the virtual timer code.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 08/10] KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the firmware tables

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The firmware table is currently parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
>
> To avoid code duplication, use the newly function
> arch_timer_get_kvm_info()
> which return all the information required by the virtual timer code.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 08/10] KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the firmware tables

[Shanker Donthineni]

On 04/11/2016 10:32 AM, Julien Grall wrote:
> The firmware table is currently parsed by the virtual timer code in
> order to retrieve the virtual timer interrupt. However, this is already
> done by the arch timer driver.
>
> To avoid code duplication, use the newly function
> arch_timer_get_kvm_info()
> which return all the information required by the virtual timer code.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server platform.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 09/10] KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware tables

[Shanker Donthineni]

Hi Julien,


On 04/11/2016 10:32 AM, Julien Grall wrote:
> Currently, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other time when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Use the recently introduced helper gic_get_kvm_info() to get
> information about the virtual GIC.
>
> With this change, the virtual GIC becomes agnostic to the firmware
> table and KVM will be able to initialize the vGIC on ACPI.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server with PAGE_SIZE=4K.
> ---
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Gleb Natapov <gleb@kernel.org>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
>
>     Changes in v6:
>         - Add Christoffer's reviewed-by
>
>     Changes in v4:
>         - Remove validation check as they are already done during
>         parsing.
>         - Move the alignement check from the parsing to the vGIC code.
>         - Fix typo in the commit message
>
>     Changes in v2:
>         - Use 0 rather than a negative value to know when the maintenance
> IRQ
>         is not present.
>         - Use resource for vcpu and vctrl.
> ---
>  include/kvm/arm_vgic.h |  7 +++---
>  virt/kvm/arm/vgic-v2.c | 61
> +++++++++++++++++++++-----------------------------
>  virt/kvm/arm/vgic-v3.c | 47 +++++++++++++-------------------------
>  virt/kvm/arm/vgic.c    | 50 ++++++++++++++++++++++-------------------
>  4 files changed, 73 insertions(+), 92 deletions(-)
>
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 281caf8..be6037a 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -25,6 +25,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/types.h>
>  #include <kvm/iodev.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #define VGIC_NR_IRQS_LEGACY	256
>  #define VGIC_NR_SGIS		16
> @@ -353,15 +354,15 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu,
> struct irq_phys_map *map);
>  #define vgic_initialized(k)	(!!((k)->arch.vgic.nr_cpus))
>  #define vgic_ready(k)		((k)->arch.vgic.ready)
>  
> -int vgic_v2_probe(struct device_node *vgic_node,
> +int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params);
>  #ifdef CONFIG_KVM_ARM_VGIC_V3
> -int vgic_v3_probe(struct device_node *vgic_node,
> +int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params);
>  #else
> -static inline int vgic_v3_probe(struct device_node *vgic_node,
> +static inline int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  				const struct vgic_ops **ops,
>  				const struct vgic_params **params)
>  {
> diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
> index 67ec334..7e826c9 100644
> --- a/virt/kvm/arm/vgic-v2.c
> +++ b/virt/kvm/arm/vgic-v2.c
> @@ -20,9 +20,6 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  
>  #include <linux/irqchip/arm-gic.h>
>  
> @@ -186,38 +183,39 @@ static void vgic_cpu_init_lrs(void *params)
>  }
>  
>  /**
> - * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in
> DT
> - * @node:	pointer to the DT node
> - * @ops: 	address of a pointer to the GICv2 operations
> - * @params:	address of a pointer to HW-specific parameters
> + * vgic_v2_probe - probe for a GICv2 compatible interrupt controller
> + * @gic_kvm_info:	pointer to the GIC description
> + * @ops:		address of a pointer to the GICv2 operations
> + * @params:		address of a pointer to HW-specific parameters
>   *
>   * Returns 0 if a GICv2 has been found, with the low level operations
>   * in *ops and the HW parameters in *params. Returns an error code
>   * otherwise.
>   */
> -int vgic_v2_probe(struct device_node *vgic_node,
> -		  const struct vgic_ops **ops,
> -		  const struct vgic_params **params)
> +int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
> +		   const struct vgic_ops **ops,
> +		   const struct vgic_params **params)
>  {
>  	int ret;
> -	struct resource vctrl_res;
> -	struct resource vcpu_res;
>  	struct vgic_params *vgic = &vgic_v2_params;
> +	const struct resource *vctrl_res = &gic_kvm_info->vctrl;
> +	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
>  
> -	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
> -	if (!vgic->maint_irq) {
> -		kvm_err("error getting vgic maintenance irq from DT\n");
> +	if (!gic_kvm_info->maint_irq) {
> +		kvm_err("error getting vgic maintenance irq\n");
>  		ret = -ENXIO;
>  		goto out;
>  	}
> +	vgic->maint_irq = gic_kvm_info->maint_irq;
>  
> -	ret = of_address_to_resource(vgic_node, 2, &vctrl_res);
> -	if (ret) {
> -		kvm_err("Cannot obtain GICH resource\n");
> +	if (!gic_kvm_info->vctrl.start) {
> +		kvm_err("GICH not present in the firmware table\n");
> +		ret = -ENXIO;
>  		goto out;
>  	}
>  
> -	vgic->vctrl_base = of_iomap(vgic_node, 2);
> +	vgic->vctrl_base = ioremap(gic_kvm_info->vctrl.start,
> +				   resource_size(&gic_kvm_info->vctrl));
>  	if (!vgic->vctrl_base) {
>  		kvm_err("Cannot ioremap GICH\n");
>  		ret = -ENOMEM;
> @@ -228,29 +226,23 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  	vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
>  
>  	ret = create_hyp_io_mappings(vgic->vctrl_base,
> -				     vgic->vctrl_base +
> resource_size(&vctrl_res),
> -				     vctrl_res.start);
> +				     vgic->vctrl_base +
> resource_size(vctrl_res),
> +				     vctrl_res->start);
>  	if (ret) {
>  		kvm_err("Cannot map VCTRL into hyp\n");
>  		goto out_unmap;
>  	}
>  
> -	if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
> -		kvm_err("Cannot obtain GICV resource\n");
> -		ret = -ENXIO;
> -		goto out_unmap;
> -	}
> -
> -	if (!PAGE_ALIGNED(vcpu_res.start)) {
> +	if (!PAGE_ALIGNED(vcpu_res->start)) {
>  		kvm_err("GICV physical address 0x%llx not page aligned\n",
> -			(unsigned long long)vcpu_res.start);
> +			(unsigned long long)vcpu_res->start);
>  		ret = -ENXIO;
>  		goto out_unmap;
>  	}
>  
> -	if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
> +	if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
For ACPI kernel, this check fails if PAGE_SIZE=64K/16K. Either you have
to remove the validation check here or set ACPI_GICV2_VCPU_MEM_SIZE to
64K to fix the problem. I am sue what is the right approach.


[    8.081364] GICV size 0x2000 not a multiple of page size 0x10000
[    8.097159] kvm [1]: disabling GICv2 emulation
[    8.109078] kvm [1]: GICV base=0x0, IRQ=1
[    8.124547] kvm [1]: virtual timer IRQ5
[    8.134634] kvm [1]: 8-bit VMID
>  		kvm_err("GICV size 0x%llx not a multiple of page size
> 0x%lx\n",
> -			(unsigned long long)resource_size(&vcpu_res),
> +			(unsigned long long)resource_size(vcpu_res),
>  			PAGE_SIZE);
>  		ret = -ENXIO;
>  		goto out_unmap;
> @@ -259,10 +251,10 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  	vgic->can_emulate_gicv2 = true;
>  	kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
> KVM_DEV_TYPE_ARM_VGIC_V2);
>  
> -	vgic->vcpu_base = vcpu_res.start;
> +	vgic->vcpu_base = vcpu_res->start;
>  
> -	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
> -		 vctrl_res.start, vgic->maint_irq);
> +	kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
> +		 gic_kvm_info->vctrl.start, vgic->vcpu_base,
> vgic->maint_irq);
>  
>  	vgic->type = VGIC_V2;
>  	vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;
> @@ -276,6 +268,5 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  out_unmap:
>  	iounmap(vgic->vctrl_base);
>  out:
> -	of_node_put(vgic_node);
>  	return ret;
>  }
> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
> index 999bdc6..c02a1b1 100644
> --- a/virt/kvm/arm/vgic-v3.c
> +++ b/virt/kvm/arm/vgic-v3.c
> @@ -20,11 +20,9 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  
>  #include <linux/irqchip/arm-gic-v3.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #include <asm/kvm_emulate.h>
>  #include <asm/kvm_arm.h>
> @@ -222,30 +220,24 @@ static void vgic_cpu_init_lrs(void *params)
>  }
>  
>  /**
> - * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in
> DT
> - * @node:	pointer to the DT node
> - * @ops: 	address of a pointer to the GICv3 operations
> - * @params:	address of a pointer to HW-specific parameters
> + * vgic_v3_probe - probe for a GICv3 compatible interrupt controller
> + * @gic_kvm_info:	pointer to the GIC description
> + * @ops:		address of a pointer to the GICv3 operations
> + * @params:		address of a pointer to HW-specific parameters
>   *
>   * Returns 0 if a GICv3 has been found, with the low level operations
>   * in *ops and the HW parameters in *params. Returns an error code
>   * otherwise.
>   */
> -int vgic_v3_probe(struct device_node *vgic_node,
> +int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params)
>  {
>  	int ret = 0;
> -	u32 gicv_idx;
> -	struct resource vcpu_res;
>  	struct vgic_params *vgic = &vgic_v3_params;
> +	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
>  
> -	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
> -	if (!vgic->maint_irq) {
> -		kvm_err("error getting vgic maintenance irq from DT\n");
> -		ret = -ENXIO;
> -		goto out;
> -	}
> +	vgic->maint_irq = gic_kvm_info->maint_irq;
>  
>  	ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2);
>  
> @@ -256,24 +248,19 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  	vgic->nr_lr = (ich_vtr_el2 & 0xf) + 1;
>  	vgic->can_emulate_gicv2 = false;
>  
> -	if (of_property_read_u32(vgic_node, "#redistributor-regions",
> &gicv_idx))
> -		gicv_idx = 1;
> -
> -	gicv_idx += 3; /* Also skip GICD, GICC, GICH */
> -	if (of_address_to_resource(vgic_node, gicv_idx, &vcpu_res)) {
> +	if (!vcpu_res->start) {
>  		kvm_info("GICv3: no GICV resource entry\n");
>  		vgic->vcpu_base = 0;
> -	} else if (!PAGE_ALIGNED(vcpu_res.start)) {
> +	} else if (!PAGE_ALIGNED(vcpu_res->start)) {
>  		pr_warn("GICV physical address 0x%llx not page aligned\n",
> -			(unsigned long long)vcpu_res.start);
> +			(unsigned long long)vcpu_res->start);
>  		vgic->vcpu_base = 0;
> -	} else if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
> +	} else if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
>  		pr_warn("GICV size 0x%llx not a multiple of page size
> 0x%lx\n",
> -			(unsigned long long)resource_size(&vcpu_res),
> +			(unsigned long long)resource_size(vcpu_res),
>  			PAGE_SIZE);
> -		vgic->vcpu_base = 0;
>  	} else {
> -		vgic->vcpu_base = vcpu_res.start;
> +		vgic->vcpu_base = vcpu_res->start;
>  		vgic->can_emulate_gicv2 = true;
>  		kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
>  					KVM_DEV_TYPE_ARM_VGIC_V2);
> @@ -286,15 +273,13 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  	vgic->type = VGIC_V3;
>  	vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
>  
> -	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
> -		 vcpu_res.start, vgic->maint_irq);
> +	kvm_info("GICV base=0x%llx, IRQ=%d\n",
> +		 vgic->vcpu_base, vgic->maint_irq);
>  
>  	on_each_cpu(vgic_cpu_init_lrs, vgic, 1);
>  
>  	*ops = &vgic_v3_ops;
>  	*params = vgic;
>  
> -out:
> -	of_node_put(vgic_node);
>  	return ret;
>  }
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 00429b3..60668a7 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -21,9 +21,7 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> +#include <linux/irq.h>
>  #include <linux/rculist.h>
>  #include <linux/uaccess.h>
>  
> @@ -33,6 +31,7 @@
>  #include <trace/events/kvm.h>
>  #include <asm/kvm.h>
>  #include <kvm/iodev.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #define CREATE_TRACE_POINTS
>  #include "trace.h"
> @@ -2389,33 +2388,38 @@ static struct notifier_block vgic_cpu_nb = {
>  	.notifier_call = vgic_cpu_notify,
>  };
>  
> -static const struct of_device_id vgic_ids[] = {
> -	{ .compatible = "arm,cortex-a15-gic",	.data = vgic_v2_probe, },
> -	{ .compatible = "arm,cortex-a7-gic",	.data = vgic_v2_probe, },
> -	{ .compatible = "arm,gic-400",		.data = vgic_v2_probe, },
> -	{ .compatible = "arm,gic-v3",		.data = vgic_v3_probe, },
> -	{},
> -};
> -
> -int kvm_vgic_hyp_init(void)
> +static int kvm_vgic_probe(void)
>  {
> -	const struct of_device_id *matched_id;
> -	const int (*vgic_probe)(struct device_node *,const struct vgic_ops
> **,
> -				const struct vgic_params **);
> -	struct device_node *vgic_node;
> +	const struct gic_kvm_info *gic_kvm_info;
>  	int ret;
>  
> -	vgic_node = of_find_matching_node_and_match(NULL,
> -						    vgic_ids,
> &matched_id);
> -	if (!vgic_node) {
> -		kvm_err("error: no compatible GIC node found\n");
> +	gic_kvm_info = gic_get_kvm_info();
> +	if (!gic_kvm_info)
>  		return -ENODEV;
> +
> +	switch (gic_kvm_info->type) {
> +	case GIC_V2:
> +		ret = vgic_v2_probe(gic_kvm_info, &vgic_ops, &vgic);
> +		break;
> +	case GIC_V3:
> +		ret = vgic_v3_probe(gic_kvm_info, &vgic_ops, &vgic);
> +		break;
> +	default:
> +		ret = -ENODEV;
>  	}
>  
> -	vgic_probe = matched_id->data;
> -	ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
> -	if (ret)
> +	return ret;
> +}
> +
> +int kvm_vgic_hyp_init(void)
> +{
> +	int ret;
> +
> +	ret = kvm_vgic_probe();
> +	if (ret) {
> +		kvm_err("error: KVM vGIC probing failed\n");
>  		return ret;
> +	}
>  
>  	ret = request_percpu_irq(vgic->maint_irq,
> vgic_maintenance_handler,
>  				 "vgic", kvm_get_running_vcpus());

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 09/10] KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware tables

[Shanker Donthineni]

Hi Julien,


On 04/11/2016 10:32 AM, Julien Grall wrote:
> Currently, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other time when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Use the recently introduced helper gic_get_kvm_info() to get
> information about the virtual GIC.
>
> With this change, the virtual GIC becomes agnostic to the firmware
> table and KVM will be able to initialize the vGIC on ACPI.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server with PAGE_SIZE=4K.
> ---
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Gleb Natapov <gleb@kernel.org>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
>
>     Changes in v6:
>         - Add Christoffer's reviewed-by
>
>     Changes in v4:
>         - Remove validation check as they are already done during
>         parsing.
>         - Move the alignement check from the parsing to the vGIC code.
>         - Fix typo in the commit message
>
>     Changes in v2:
>         - Use 0 rather than a negative value to know when the maintenance
> IRQ
>         is not present.
>         - Use resource for vcpu and vctrl.
> ---
>  include/kvm/arm_vgic.h |  7 +++---
>  virt/kvm/arm/vgic-v2.c | 61
> +++++++++++++++++++++-----------------------------
>  virt/kvm/arm/vgic-v3.c | 47 +++++++++++++-------------------------
>  virt/kvm/arm/vgic.c    | 50 ++++++++++++++++++++++-------------------
>  4 files changed, 73 insertions(+), 92 deletions(-)
>
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 281caf8..be6037a 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -25,6 +25,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/types.h>
>  #include <kvm/iodev.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #define VGIC_NR_IRQS_LEGACY	256
>  #define VGIC_NR_SGIS		16
> @@ -353,15 +354,15 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu,
> struct irq_phys_map *map);
>  #define vgic_initialized(k)	(!!((k)->arch.vgic.nr_cpus))
>  #define vgic_ready(k)		((k)->arch.vgic.ready)
>  
> -int vgic_v2_probe(struct device_node *vgic_node,
> +int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params);
>  #ifdef CONFIG_KVM_ARM_VGIC_V3
> -int vgic_v3_probe(struct device_node *vgic_node,
> +int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params);
>  #else
> -static inline int vgic_v3_probe(struct device_node *vgic_node,
> +static inline int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  				const struct vgic_ops **ops,
>  				const struct vgic_params **params)
>  {
> diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
> index 67ec334..7e826c9 100644
> --- a/virt/kvm/arm/vgic-v2.c
> +++ b/virt/kvm/arm/vgic-v2.c
> @@ -20,9 +20,6 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  
>  #include <linux/irqchip/arm-gic.h>
>  
> @@ -186,38 +183,39 @@ static void vgic_cpu_init_lrs(void *params)
>  }
>  
>  /**
> - * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in
> DT
> - * @node:	pointer to the DT node
> - * @ops: 	address of a pointer to the GICv2 operations
> - * @params:	address of a pointer to HW-specific parameters
> + * vgic_v2_probe - probe for a GICv2 compatible interrupt controller
> + * @gic_kvm_info:	pointer to the GIC description
> + * @ops:		address of a pointer to the GICv2 operations
> + * @params:		address of a pointer to HW-specific parameters
>   *
>   * Returns 0 if a GICv2 has been found, with the low level operations
>   * in *ops and the HW parameters in *params. Returns an error code
>   * otherwise.
>   */
> -int vgic_v2_probe(struct device_node *vgic_node,
> -		  const struct vgic_ops **ops,
> -		  const struct vgic_params **params)
> +int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
> +		   const struct vgic_ops **ops,
> +		   const struct vgic_params **params)
>  {
>  	int ret;
> -	struct resource vctrl_res;
> -	struct resource vcpu_res;
>  	struct vgic_params *vgic = &vgic_v2_params;
> +	const struct resource *vctrl_res = &gic_kvm_info->vctrl;
> +	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
>  
> -	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
> -	if (!vgic->maint_irq) {
> -		kvm_err("error getting vgic maintenance irq from DT\n");
> +	if (!gic_kvm_info->maint_irq) {
> +		kvm_err("error getting vgic maintenance irq\n");
>  		ret = -ENXIO;
>  		goto out;
>  	}
> +	vgic->maint_irq = gic_kvm_info->maint_irq;
>  
> -	ret = of_address_to_resource(vgic_node, 2, &vctrl_res);
> -	if (ret) {
> -		kvm_err("Cannot obtain GICH resource\n");
> +	if (!gic_kvm_info->vctrl.start) {
> +		kvm_err("GICH not present in the firmware table\n");
> +		ret = -ENXIO;
>  		goto out;
>  	}
>  
> -	vgic->vctrl_base = of_iomap(vgic_node, 2);
> +	vgic->vctrl_base = ioremap(gic_kvm_info->vctrl.start,
> +				   resource_size(&gic_kvm_info->vctrl));
>  	if (!vgic->vctrl_base) {
>  		kvm_err("Cannot ioremap GICH\n");
>  		ret = -ENOMEM;
> @@ -228,29 +226,23 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  	vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
>  
>  	ret = create_hyp_io_mappings(vgic->vctrl_base,
> -				     vgic->vctrl_base +
> resource_size(&vctrl_res),
> -				     vctrl_res.start);
> +				     vgic->vctrl_base +
> resource_size(vctrl_res),
> +				     vctrl_res->start);
>  	if (ret) {
>  		kvm_err("Cannot map VCTRL into hyp\n");
>  		goto out_unmap;
>  	}
>  
> -	if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
> -		kvm_err("Cannot obtain GICV resource\n");
> -		ret = -ENXIO;
> -		goto out_unmap;
> -	}
> -
> -	if (!PAGE_ALIGNED(vcpu_res.start)) {
> +	if (!PAGE_ALIGNED(vcpu_res->start)) {
>  		kvm_err("GICV physical address 0x%llx not page aligned\n",
> -			(unsigned long long)vcpu_res.start);
> +			(unsigned long long)vcpu_res->start);
>  		ret = -ENXIO;
>  		goto out_unmap;
>  	}
>  
> -	if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
> +	if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
For ACPI kernel, this check fails if PAGE_SIZE=64K/16K. Either you have
to remove the validation check here or set ACPI_GICV2_VCPU_MEM_SIZE to
64K to fix the problem. I am sue what is the right approach.


[    8.081364] GICV size 0x2000 not a multiple of page size 0x10000
[    8.097159] kvm [1]: disabling GICv2 emulation
[    8.109078] kvm [1]: GICV base=0x0, IRQ=1
[    8.124547] kvm [1]: virtual timer IRQ5
[    8.134634] kvm [1]: 8-bit VMID
>  		kvm_err("GICV size 0x%llx not a multiple of page size
> 0x%lx\n",
> -			(unsigned long long)resource_size(&vcpu_res),
> +			(unsigned long long)resource_size(vcpu_res),
>  			PAGE_SIZE);
>  		ret = -ENXIO;
>  		goto out_unmap;
> @@ -259,10 +251,10 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  	vgic->can_emulate_gicv2 = true;
>  	kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
> KVM_DEV_TYPE_ARM_VGIC_V2);
>  
> -	vgic->vcpu_base = vcpu_res.start;
> +	vgic->vcpu_base = vcpu_res->start;
>  
> -	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
> -		 vctrl_res.start, vgic->maint_irq);
> +	kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
> +		 gic_kvm_info->vctrl.start, vgic->vcpu_base,
> vgic->maint_irq);
>  
>  	vgic->type = VGIC_V2;
>  	vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;
> @@ -276,6 +268,5 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  out_unmap:
>  	iounmap(vgic->vctrl_base);
>  out:
> -	of_node_put(vgic_node);
>  	return ret;
>  }
> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
> index 999bdc6..c02a1b1 100644
> --- a/virt/kvm/arm/vgic-v3.c
> +++ b/virt/kvm/arm/vgic-v3.c
> @@ -20,11 +20,9 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  
>  #include <linux/irqchip/arm-gic-v3.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #include <asm/kvm_emulate.h>
>  #include <asm/kvm_arm.h>
> @@ -222,30 +220,24 @@ static void vgic_cpu_init_lrs(void *params)
>  }
>  
>  /**
> - * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in
> DT
> - * @node:	pointer to the DT node
> - * @ops: 	address of a pointer to the GICv3 operations
> - * @params:	address of a pointer to HW-specific parameters
> + * vgic_v3_probe - probe for a GICv3 compatible interrupt controller
> + * @gic_kvm_info:	pointer to the GIC description
> + * @ops:		address of a pointer to the GICv3 operations
> + * @params:		address of a pointer to HW-specific parameters
>   *
>   * Returns 0 if a GICv3 has been found, with the low level operations
>   * in *ops and the HW parameters in *params. Returns an error code
>   * otherwise.
>   */
> -int vgic_v3_probe(struct device_node *vgic_node,
> +int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params)
>  {
>  	int ret = 0;
> -	u32 gicv_idx;
> -	struct resource vcpu_res;
>  	struct vgic_params *vgic = &vgic_v3_params;
> +	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
>  
> -	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
> -	if (!vgic->maint_irq) {
> -		kvm_err("error getting vgic maintenance irq from DT\n");
> -		ret = -ENXIO;
> -		goto out;
> -	}
> +	vgic->maint_irq = gic_kvm_info->maint_irq;
>  
>  	ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2);
>  
> @@ -256,24 +248,19 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  	vgic->nr_lr = (ich_vtr_el2 & 0xf) + 1;
>  	vgic->can_emulate_gicv2 = false;
>  
> -	if (of_property_read_u32(vgic_node, "#redistributor-regions",
> &gicv_idx))
> -		gicv_idx = 1;
> -
> -	gicv_idx += 3; /* Also skip GICD, GICC, GICH */
> -	if (of_address_to_resource(vgic_node, gicv_idx, &vcpu_res)) {
> +	if (!vcpu_res->start) {
>  		kvm_info("GICv3: no GICV resource entry\n");
>  		vgic->vcpu_base = 0;
> -	} else if (!PAGE_ALIGNED(vcpu_res.start)) {
> +	} else if (!PAGE_ALIGNED(vcpu_res->start)) {
>  		pr_warn("GICV physical address 0x%llx not page aligned\n",
> -			(unsigned long long)vcpu_res.start);
> +			(unsigned long long)vcpu_res->start);
>  		vgic->vcpu_base = 0;
> -	} else if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
> +	} else if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
>  		pr_warn("GICV size 0x%llx not a multiple of page size
> 0x%lx\n",
> -			(unsigned long long)resource_size(&vcpu_res),
> +			(unsigned long long)resource_size(vcpu_res),
>  			PAGE_SIZE);
> -		vgic->vcpu_base = 0;
>  	} else {
> -		vgic->vcpu_base = vcpu_res.start;
> +		vgic->vcpu_base = vcpu_res->start;
>  		vgic->can_emulate_gicv2 = true;
>  		kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
>  					KVM_DEV_TYPE_ARM_VGIC_V2);
> @@ -286,15 +273,13 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  	vgic->type = VGIC_V3;
>  	vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
>  
> -	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
> -		 vcpu_res.start, vgic->maint_irq);
> +	kvm_info("GICV base=0x%llx, IRQ=%d\n",
> +		 vgic->vcpu_base, vgic->maint_irq);
>  
>  	on_each_cpu(vgic_cpu_init_lrs, vgic, 1);
>  
>  	*ops = &vgic_v3_ops;
>  	*params = vgic;
>  
> -out:
> -	of_node_put(vgic_node);
>  	return ret;
>  }
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 00429b3..60668a7 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -21,9 +21,7 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> +#include <linux/irq.h>
>  #include <linux/rculist.h>
>  #include <linux/uaccess.h>
>  
> @@ -33,6 +31,7 @@
>  #include <trace/events/kvm.h>
>  #include <asm/kvm.h>
>  #include <kvm/iodev.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #define CREATE_TRACE_POINTS
>  #include "trace.h"
> @@ -2389,33 +2388,38 @@ static struct notifier_block vgic_cpu_nb = {
>  	.notifier_call = vgic_cpu_notify,
>  };
>  
> -static const struct of_device_id vgic_ids[] = {
> -	{ .compatible = "arm,cortex-a15-gic",	.data = vgic_v2_probe, },
> -	{ .compatible = "arm,cortex-a7-gic",	.data = vgic_v2_probe, },
> -	{ .compatible = "arm,gic-400",		.data = vgic_v2_probe, },
> -	{ .compatible = "arm,gic-v3",		.data = vgic_v3_probe, },
> -	{},
> -};
> -
> -int kvm_vgic_hyp_init(void)
> +static int kvm_vgic_probe(void)
>  {
> -	const struct of_device_id *matched_id;
> -	const int (*vgic_probe)(struct device_node *,const struct vgic_ops
> **,
> -				const struct vgic_params **);
> -	struct device_node *vgic_node;
> +	const struct gic_kvm_info *gic_kvm_info;
>  	int ret;
>  
> -	vgic_node = of_find_matching_node_and_match(NULL,
> -						    vgic_ids,
> &matched_id);
> -	if (!vgic_node) {
> -		kvm_err("error: no compatible GIC node found\n");
> +	gic_kvm_info = gic_get_kvm_info();
> +	if (!gic_kvm_info)
>  		return -ENODEV;
> +
> +	switch (gic_kvm_info->type) {
> +	case GIC_V2:
> +		ret = vgic_v2_probe(gic_kvm_info, &vgic_ops, &vgic);
> +		break;
> +	case GIC_V3:
> +		ret = vgic_v3_probe(gic_kvm_info, &vgic_ops, &vgic);
> +		break;
> +	default:
> +		ret = -ENODEV;
>  	}
>  
> -	vgic_probe = matched_id->data;
> -	ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
> -	if (ret)
> +	return ret;
> +}
> +
> +int kvm_vgic_hyp_init(void)
> +{
> +	int ret;
> +
> +	ret = kvm_vgic_probe();
> +	if (ret) {
> +		kvm_err("error: KVM vGIC probing failed\n");
>  		return ret;
> +	}
>  
>  	ret = request_percpu_irq(vgic->maint_irq,
> vgic_maintenance_handler,
>  				 "vgic", kvm_get_running_vcpus());

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 09/10] KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware tables

[Shanker Donthineni]

Hi Julien,


On 04/11/2016 10:32 AM, Julien Grall wrote:
> Currently, the firmware tables are parsed 2 times: once in the GIC
> drivers, the other time when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
>
> Use the recently introduced helper gic_get_kvm_info() to get
> information about the virtual GIC.
>
> With this change, the virtual GIC becomes agnostic to the firmware
> table and KVM will be able to initialize the vGIC on ACPI.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server with PAGE_SIZE=4K.
> ---
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Gleb Natapov <gleb@kernel.org>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
>
>     Changes in v6:
>         - Add Christoffer's reviewed-by
>
>     Changes in v4:
>         - Remove validation check as they are already done during
>         parsing.
>         - Move the alignement check from the parsing to the vGIC code.
>         - Fix typo in the commit message
>
>     Changes in v2:
>         - Use 0 rather than a negative value to know when the maintenance
> IRQ
>         is not present.
>         - Use resource for vcpu and vctrl.
> ---
>  include/kvm/arm_vgic.h |  7 +++---
>  virt/kvm/arm/vgic-v2.c | 61
> +++++++++++++++++++++-----------------------------
>  virt/kvm/arm/vgic-v3.c | 47 +++++++++++++-------------------------
>  virt/kvm/arm/vgic.c    | 50 ++++++++++++++++++++++-------------------
>  4 files changed, 73 insertions(+), 92 deletions(-)
>
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 281caf8..be6037a 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -25,6 +25,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/types.h>
>  #include <kvm/iodev.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #define VGIC_NR_IRQS_LEGACY	256
>  #define VGIC_NR_SGIS		16
> @@ -353,15 +354,15 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu,
> struct irq_phys_map *map);
>  #define vgic_initialized(k)	(!!((k)->arch.vgic.nr_cpus))
>  #define vgic_ready(k)		((k)->arch.vgic.ready)
>  
> -int vgic_v2_probe(struct device_node *vgic_node,
> +int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params);
>  #ifdef CONFIG_KVM_ARM_VGIC_V3
> -int vgic_v3_probe(struct device_node *vgic_node,
> +int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params);
>  #else
> -static inline int vgic_v3_probe(struct device_node *vgic_node,
> +static inline int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  				const struct vgic_ops **ops,
>  				const struct vgic_params **params)
>  {
> diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
> index 67ec334..7e826c9 100644
> --- a/virt/kvm/arm/vgic-v2.c
> +++ b/virt/kvm/arm/vgic-v2.c
> @@ -20,9 +20,6 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  
>  #include <linux/irqchip/arm-gic.h>
>  
> @@ -186,38 +183,39 @@ static void vgic_cpu_init_lrs(void *params)
>  }
>  
>  /**
> - * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in
> DT
> - * @node:	pointer to the DT node
> - * @ops: 	address of a pointer to the GICv2 operations
> - * @params:	address of a pointer to HW-specific parameters
> + * vgic_v2_probe - probe for a GICv2 compatible interrupt controller
> + * @gic_kvm_info:	pointer to the GIC description
> + * @ops:		address of a pointer to the GICv2 operations
> + * @params:		address of a pointer to HW-specific parameters
>   *
>   * Returns 0 if a GICv2 has been found, with the low level operations
>   * in *ops and the HW parameters in *params. Returns an error code
>   * otherwise.
>   */
> -int vgic_v2_probe(struct device_node *vgic_node,
> -		  const struct vgic_ops **ops,
> -		  const struct vgic_params **params)
> +int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
> +		   const struct vgic_ops **ops,
> +		   const struct vgic_params **params)
>  {
>  	int ret;
> -	struct resource vctrl_res;
> -	struct resource vcpu_res;
>  	struct vgic_params *vgic = &vgic_v2_params;
> +	const struct resource *vctrl_res = &gic_kvm_info->vctrl;
> +	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
>  
> -	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
> -	if (!vgic->maint_irq) {
> -		kvm_err("error getting vgic maintenance irq from DT\n");
> +	if (!gic_kvm_info->maint_irq) {
> +		kvm_err("error getting vgic maintenance irq\n");
>  		ret = -ENXIO;
>  		goto out;
>  	}
> +	vgic->maint_irq = gic_kvm_info->maint_irq;
>  
> -	ret = of_address_to_resource(vgic_node, 2, &vctrl_res);
> -	if (ret) {
> -		kvm_err("Cannot obtain GICH resource\n");
> +	if (!gic_kvm_info->vctrl.start) {
> +		kvm_err("GICH not present in the firmware table\n");
> +		ret = -ENXIO;
>  		goto out;
>  	}
>  
> -	vgic->vctrl_base = of_iomap(vgic_node, 2);
> +	vgic->vctrl_base = ioremap(gic_kvm_info->vctrl.start,
> +				   resource_size(&gic_kvm_info->vctrl));
>  	if (!vgic->vctrl_base) {
>  		kvm_err("Cannot ioremap GICH\n");
>  		ret = -ENOMEM;
> @@ -228,29 +226,23 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  	vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
>  
>  	ret = create_hyp_io_mappings(vgic->vctrl_base,
> -				     vgic->vctrl_base +
> resource_size(&vctrl_res),
> -				     vctrl_res.start);
> +				     vgic->vctrl_base +
> resource_size(vctrl_res),
> +				     vctrl_res->start);
>  	if (ret) {
>  		kvm_err("Cannot map VCTRL into hyp\n");
>  		goto out_unmap;
>  	}
>  
> -	if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
> -		kvm_err("Cannot obtain GICV resource\n");
> -		ret = -ENXIO;
> -		goto out_unmap;
> -	}
> -
> -	if (!PAGE_ALIGNED(vcpu_res.start)) {
> +	if (!PAGE_ALIGNED(vcpu_res->start)) {
>  		kvm_err("GICV physical address 0x%llx not page aligned\n",
> -			(unsigned long long)vcpu_res.start);
> +			(unsigned long long)vcpu_res->start);
>  		ret = -ENXIO;
>  		goto out_unmap;
>  	}
>  
> -	if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
> +	if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
For ACPI kernel, this check fails if PAGE_SIZE=64K/16K. Either you have
to remove the validation check here or set ACPI_GICV2_VCPU_MEM_SIZE to
64K to fix the problem. I am sue what is the right approach.


[    8.081364] GICV size 0x2000 not a multiple of page size 0x10000
[    8.097159] kvm [1]: disabling GICv2 emulation
[    8.109078] kvm [1]: GICV base=0x0, IRQ=1
[    8.124547] kvm [1]: virtual timer IRQ5
[    8.134634] kvm [1]: 8-bit VMID
>  		kvm_err("GICV size 0x%llx not a multiple of page size
> 0x%lx\n",
> -			(unsigned long long)resource_size(&vcpu_res),
> +			(unsigned long long)resource_size(vcpu_res),
>  			PAGE_SIZE);
>  		ret = -ENXIO;
>  		goto out_unmap;
> @@ -259,10 +251,10 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  	vgic->can_emulate_gicv2 = true;
>  	kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
> KVM_DEV_TYPE_ARM_VGIC_V2);
>  
> -	vgic->vcpu_base = vcpu_res.start;
> +	vgic->vcpu_base = vcpu_res->start;
>  
> -	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
> -		 vctrl_res.start, vgic->maint_irq);
> +	kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
> +		 gic_kvm_info->vctrl.start, vgic->vcpu_base,
> vgic->maint_irq);
>  
>  	vgic->type = VGIC_V2;
>  	vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;
> @@ -276,6 +268,5 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  out_unmap:
>  	iounmap(vgic->vctrl_base);
>  out:
> -	of_node_put(vgic_node);
>  	return ret;
>  }
> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
> index 999bdc6..c02a1b1 100644
> --- a/virt/kvm/arm/vgic-v3.c
> +++ b/virt/kvm/arm/vgic-v3.c
> @@ -20,11 +20,9 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  
>  #include <linux/irqchip/arm-gic-v3.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #include <asm/kvm_emulate.h>
>  #include <asm/kvm_arm.h>
> @@ -222,30 +220,24 @@ static void vgic_cpu_init_lrs(void *params)
>  }
>  
>  /**
> - * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in
> DT
> - * @node:	pointer to the DT node
> - * @ops: 	address of a pointer to the GICv3 operations
> - * @params:	address of a pointer to HW-specific parameters
> + * vgic_v3_probe - probe for a GICv3 compatible interrupt controller
> + * @gic_kvm_info:	pointer to the GIC description
> + * @ops:		address of a pointer to the GICv3 operations
> + * @params:		address of a pointer to HW-specific parameters
>   *
>   * Returns 0 if a GICv3 has been found, with the low level operations
>   * in *ops and the HW parameters in *params. Returns an error code
>   * otherwise.
>   */
> -int vgic_v3_probe(struct device_node *vgic_node,
> +int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params)
>  {
>  	int ret = 0;
> -	u32 gicv_idx;
> -	struct resource vcpu_res;
>  	struct vgic_params *vgic = &vgic_v3_params;
> +	const struct resource *vcpu_res = &gic_kvm_info->vcpu;
>  
> -	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
> -	if (!vgic->maint_irq) {
> -		kvm_err("error getting vgic maintenance irq from DT\n");
> -		ret = -ENXIO;
> -		goto out;
> -	}
> +	vgic->maint_irq = gic_kvm_info->maint_irq;
>  
>  	ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2);
>  
> @@ -256,24 +248,19 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  	vgic->nr_lr = (ich_vtr_el2 & 0xf) + 1;
>  	vgic->can_emulate_gicv2 = false;
>  
> -	if (of_property_read_u32(vgic_node, "#redistributor-regions",
> &gicv_idx))
> -		gicv_idx = 1;
> -
> -	gicv_idx += 3; /* Also skip GICD, GICC, GICH */
> -	if (of_address_to_resource(vgic_node, gicv_idx, &vcpu_res)) {
> +	if (!vcpu_res->start) {
>  		kvm_info("GICv3: no GICV resource entry\n");
>  		vgic->vcpu_base = 0;
> -	} else if (!PAGE_ALIGNED(vcpu_res.start)) {
> +	} else if (!PAGE_ALIGNED(vcpu_res->start)) {
>  		pr_warn("GICV physical address 0x%llx not page aligned\n",
> -			(unsigned long long)vcpu_res.start);
> +			(unsigned long long)vcpu_res->start);
>  		vgic->vcpu_base = 0;
> -	} else if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
> +	} else if (!PAGE_ALIGNED(resource_size(vcpu_res))) {
>  		pr_warn("GICV size 0x%llx not a multiple of page size
> 0x%lx\n",
> -			(unsigned long long)resource_size(&vcpu_res),
> +			(unsigned long long)resource_size(vcpu_res),
>  			PAGE_SIZE);
> -		vgic->vcpu_base = 0;
>  	} else {
> -		vgic->vcpu_base = vcpu_res.start;
> +		vgic->vcpu_base = vcpu_res->start;
>  		vgic->can_emulate_gicv2 = true;
>  		kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
>  					KVM_DEV_TYPE_ARM_VGIC_V2);
> @@ -286,15 +273,13 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  	vgic->type = VGIC_V3;
>  	vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
>  
> -	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
> -		 vcpu_res.start, vgic->maint_irq);
> +	kvm_info("GICV base=0x%llx, IRQ=%d\n",
> +		 vgic->vcpu_base, vgic->maint_irq);
>  
>  	on_each_cpu(vgic_cpu_init_lrs, vgic, 1);
>  
>  	*ops = &vgic_v3_ops;
>  	*params = vgic;
>  
> -out:
> -	of_node_put(vgic_node);
>  	return ret;
>  }
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 00429b3..60668a7 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -21,9 +21,7 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> +#include <linux/irq.h>
>  #include <linux/rculist.h>
>  #include <linux/uaccess.h>
>  
> @@ -33,6 +31,7 @@
>  #include <trace/events/kvm.h>
>  #include <asm/kvm.h>
>  #include <kvm/iodev.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #define CREATE_TRACE_POINTS
>  #include "trace.h"
> @@ -2389,33 +2388,38 @@ static struct notifier_block vgic_cpu_nb = {
>  	.notifier_call = vgic_cpu_notify,
>  };
>  
> -static const struct of_device_id vgic_ids[] = {
> -	{ .compatible = "arm,cortex-a15-gic",	.data = vgic_v2_probe, },
> -	{ .compatible = "arm,cortex-a7-gic",	.data = vgic_v2_probe, },
> -	{ .compatible = "arm,gic-400",		.data = vgic_v2_probe, },
> -	{ .compatible = "arm,gic-v3",		.data = vgic_v3_probe, },
> -	{},
> -};
> -
> -int kvm_vgic_hyp_init(void)
> +static int kvm_vgic_probe(void)
>  {
> -	const struct of_device_id *matched_id;
> -	const int (*vgic_probe)(struct device_node *,const struct vgic_ops
> **,
> -				const struct vgic_params **);
> -	struct device_node *vgic_node;
> +	const struct gic_kvm_info *gic_kvm_info;
>  	int ret;
>  
> -	vgic_node = of_find_matching_node_and_match(NULL,
> -						    vgic_ids,
> &matched_id);
> -	if (!vgic_node) {
> -		kvm_err("error: no compatible GIC node found\n");
> +	gic_kvm_info = gic_get_kvm_info();
> +	if (!gic_kvm_info)
>  		return -ENODEV;
> +
> +	switch (gic_kvm_info->type) {
> +	case GIC_V2:
> +		ret = vgic_v2_probe(gic_kvm_info, &vgic_ops, &vgic);
> +		break;
> +	case GIC_V3:
> +		ret = vgic_v3_probe(gic_kvm_info, &vgic_ops, &vgic);
> +		break;
> +	default:
> +		ret = -ENODEV;
>  	}
>  
> -	vgic_probe = matched_id->data;
> -	ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
> -	if (ret)
> +	return ret;
> +}
> +
> +int kvm_vgic_hyp_init(void)
> +{
> +	int ret;
> +
> +	ret = kvm_vgic_probe();
> +	if (ret) {
> +		kvm_err("error: KVM vGIC probing failed\n");
>  		return ret;
> +	}
>  
>  	ret = request_percpu_irq(vgic->maint_irq,
> vgic_maintenance_handler,
>  				 "vgic", kvm_get_running_vcpus());

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Shanker Donthineni]

On 04/11/2016 10:33 AM, Julien Grall wrote:
> The only call of arch_timer_get_timecounter (in KVM) has been removed.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Shanker Donthineni]

On 04/11/2016 10:33 AM, Julien Grall wrote:
> The only call of arch_timer_get_timecounter (in KVM) has been removed.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH v6 10/10] clocksource: arm_arch_timer: Remove arch_timer_get_timecounter

[Shanker Donthineni]

On 04/11/2016 10:33 AM, Julien Grall wrote:
> The only call of arch_timer_get_timecounter (in KVM) has been removed.
>
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>

Tested-by: Shanker Donthineni <shankerd@codeaurora.org>

Using the Qualcomm Technologies QDF2XXX server.

-- 
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

Re: [PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Julien Grall]

Hi Hanjun,

Sorry for the late answer.

On 13/04/16 11:01, Hanjun Guo wrote:
> On 2016/4/11 23:32, Julien Grall wrote:
>> Currently, most of the pr_* messages in the GICv3 driver don't have a
>> prefix.  Add one to make clear where the messages come from.
>>
>> Signed-off-by: Julien Grall <julien.grall@arm.com>
>>
>> ---
>>      Changes in v6:
>>          - Patch added
>> ---
>>   drivers/irqchip/irq-gic-v3.c | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
>> index 5b7d3c2..6dc6f03 100644
>> --- a/drivers/irqchip/irq-gic-v3.c
>> +++ b/drivers/irqchip/irq-gic-v3.c
>> @@ -15,6 +15,8 @@
>>    * along with this program.  If not, see
>> <http://www.gnu.org/licenses/>.
>>    */
>>
>> +#define pr_fmt(fmt)    "GICv3: " fmt
>
> I don't think this patch is needed, as GICv3 and GICv2 will
> not be probed at the same time, did I miss something?

True, however this make slightly easier to know which driver is in-use 
and avoid to prefix all the messages with "GIC:" or "GICv3:".

>
> Further more, there are prefixes in pr_fmt in this
> patch using GIC:, with your patch added, it will print:
>
> GIV3: GIC: .....
>
> which is not a good idea.

I think it is better than having message without prefix at all.

Regards,

-- 
Julien Grall

Re: [PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Julien Grall]

Hi Hanjun,

Sorry for the late answer.

On 13/04/16 11:01, Hanjun Guo wrote:
> On 2016/4/11 23:32, Julien Grall wrote:
>> Currently, most of the pr_* messages in the GICv3 driver don't have a
>> prefix.  Add one to make clear where the messages come from.
>>
>> Signed-off-by: Julien Grall <julien.grall@arm.com>
>>
>> ---
>>      Changes in v6:
>>          - Patch added
>> ---
>>   drivers/irqchip/irq-gic-v3.c | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
>> index 5b7d3c2..6dc6f03 100644
>> --- a/drivers/irqchip/irq-gic-v3.c
>> +++ b/drivers/irqchip/irq-gic-v3.c
>> @@ -15,6 +15,8 @@
>>    * along with this program.  If not, see
>> <http://www.gnu.org/licenses/>.
>>    */
>>
>> +#define pr_fmt(fmt)    "GICv3: " fmt
>
> I don't think this patch is needed, as GICv3 and GICv2 will
> not be probed at the same time, did I miss something?

True, however this make slightly easier to know which driver is in-use 
and avoid to prefix all the messages with "GIC:" or "GICv3:".

>
> Further more, there are prefixes in pr_fmt in this
> patch using GIC:, with your patch added, it will print:
>
> GIV3: GIC: .....
>
> which is not a good idea.

I think it is better than having message without prefix at all.

Regards,

-- 
Julien Grall

[PATCH v6 05/10] irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "

[Julien Grall]

Hi Hanjun,

Sorry for the late answer.

On 13/04/16 11:01, Hanjun Guo wrote:
> On 2016/4/11 23:32, Julien Grall wrote:
>> Currently, most of the pr_* messages in the GICv3 driver don't have a
>> prefix.  Add one to make clear where the messages come from.
>>
>> Signed-off-by: Julien Grall <julien.grall@arm.com>
>>
>> ---
>>      Changes in v6:
>>          - Patch added
>> ---
>>   drivers/irqchip/irq-gic-v3.c | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
>> index 5b7d3c2..6dc6f03 100644
>> --- a/drivers/irqchip/irq-gic-v3.c
>> +++ b/drivers/irqchip/irq-gic-v3.c
>> @@ -15,6 +15,8 @@
>>    * along with this program.  If not, see
>> <http://www.gnu.org/licenses/>.
>>    */
>>
>> +#define pr_fmt(fmt)    "GICv3: " fmt
>
> I don't think this patch is needed, as GICv3 and GICv2 will
> not be probed at the same time, did I miss something?

True, however this make slightly easier to know which driver is in-use 
and avoid to prefix all the messages with "GIC:" or "GICv3:".

>
> Further more, there are prefixes in pr_fmt in this
> patch using GIC:, with your patch added, it will print:
>
> GIV3: GIC: .....
>
> which is not a good idea.

I think it is better than having message without prefix at all.

Regards,

-- 
Julien Grall

Re: [PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Marc Zyngier]

[+ Thomas, Jason]

Do you have any objection against this going through the KVM tree? The
dependencies are rather intricate, and Daniel gave us his green light
already for the clocksource part.

If you'd rather maintain the usual flow, please let us know and we'll
deal with it.

Thanks,

	M.

On 11/04/16 16:32, Julien Grall wrote:
> Hello,
> 
> This patch series allows KVM to work with ACPI on ARM64.
> 
> Currently, the firmware tables are parsed by the the virtual timer and virtual
> GIC code in order to configure them correctly.
> 
> However the parsing of these tables is already done in the GIC and arch timer
> drivers. This patch series introduces new helpers to retrieve the information
> from the different drivers in order to avoid duplication of the parsing code.
> 
> To make the merge easier via the different trees, each patch modifies a single
> subsystem. The suggested plan to merge the series is divided in 3 steps:
> 
> 1) Patches #1-#2 are merged via the clocksource tree
>    Patches #2-#7 are merged via the irqchip tree
> 2) Patches #8-#9 are merge via the KVM tree
> 3) Patch #10 is merged via the clocksource tree.
> 
> For all the changes see in each patch.
> 
> Regards,
> 
> 
> Julien Grall (10):
>   clocksource: arm_arch_timer: Gather KVM specific information in a
>     structure
>   clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the
>     virtual IRQ
>   irqchip/gic-v2: Gather ACPI specific data in a single structure
>   irqchip/gic-v2: Parse and export virtual GIC information
>   irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "
>   irqchip/gic-v3: Gather all ACPI specific data in a single structure
>   irqchip/gic-v3: Parse and export virtual GIC information
>   KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the
>     firmware tables
>   KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware
>     tables
>   clocksource: arm_arch_timer: Remove arch_timer_get_timecounter
> 
>  drivers/clocksource/arm_arch_timer.c   |  11 ++-
>  drivers/irqchip/irq-gic-common.c       |  13 +++
>  drivers/irqchip/irq-gic-common.h       |   3 +
>  drivers/irqchip/irq-gic-v3.c           | 176 +++++++++++++++++++++++++++------
>  drivers/irqchip/irq-gic.c              |  87 +++++++++++++++-
>  include/clocksource/arm_arch_timer.h   |  12 +--
>  include/kvm/arm_vgic.h                 |   7 +-
>  include/linux/irqchip/arm-gic-common.h |  34 +++++++
>  virt/kvm/arm/arch_timer.c              |  40 +++-----
>  virt/kvm/arm/vgic-v2.c                 |  61 +++++-------
>  virt/kvm/arm/vgic-v3.c                 |  47 +++------
>  virt/kvm/arm/vgic.c                    |  50 +++++-----
>  12 files changed, 377 insertions(+), 164 deletions(-)
>  create mode 100644 include/linux/irqchip/arm-gic-common.h
> 


-- 
Jazz is not dead. It just smells funny...

[PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Marc Zyngier]

[+ Thomas, Jason]

Do you have any objection against this going through the KVM tree? The
dependencies are rather intricate, and Daniel gave us his green light
already for the clocksource part.

If you'd rather maintain the usual flow, please let us know and we'll
deal with it.

Thanks,

	M.

On 11/04/16 16:32, Julien Grall wrote:
> Hello,
> 
> This patch series allows KVM to work with ACPI on ARM64.
> 
> Currently, the firmware tables are parsed by the the virtual timer and virtual
> GIC code in order to configure them correctly.
> 
> However the parsing of these tables is already done in the GIC and arch timer
> drivers. This patch series introduces new helpers to retrieve the information
> from the different drivers in order to avoid duplication of the parsing code.
> 
> To make the merge easier via the different trees, each patch modifies a single
> subsystem. The suggested plan to merge the series is divided in 3 steps:
> 
> 1) Patches #1-#2 are merged via the clocksource tree
>    Patches #2-#7 are merged via the irqchip tree
> 2) Patches #8-#9 are merge via the KVM tree
> 3) Patch #10 is merged via the clocksource tree.
> 
> For all the changes see in each patch.
> 
> Regards,
> 
> 
> Julien Grall (10):
>   clocksource: arm_arch_timer: Gather KVM specific information in a
>     structure
>   clocksource: arm_arch_timer: Extend arch_timer_kvm_info to get the
>     virtual IRQ
>   irqchip/gic-v2: Gather ACPI specific data in a single structure
>   irqchip/gic-v2: Parse and export virtual GIC information
>   irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "
>   irqchip/gic-v3: Gather all ACPI specific data in a single structure
>   irqchip/gic-v3: Parse and export virtual GIC information
>   KVM: arm/arm64: arch_timer: Rely on the arch timer to parse the
>     firmware tables
>   KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware
>     tables
>   clocksource: arm_arch_timer: Remove arch_timer_get_timecounter
> 
>  drivers/clocksource/arm_arch_timer.c   |  11 ++-
>  drivers/irqchip/irq-gic-common.c       |  13 +++
>  drivers/irqchip/irq-gic-common.h       |   3 +
>  drivers/irqchip/irq-gic-v3.c           | 176 +++++++++++++++++++++++++++------
>  drivers/irqchip/irq-gic.c              |  87 +++++++++++++++-
>  include/clocksource/arm_arch_timer.h   |  12 +--
>  include/kvm/arm_vgic.h                 |   7 +-
>  include/linux/irqchip/arm-gic-common.h |  34 +++++++
>  virt/kvm/arm/arch_timer.c              |  40 +++-----
>  virt/kvm/arm/vgic-v2.c                 |  61 +++++-------
>  virt/kvm/arm/vgic-v3.c                 |  47 +++------
>  virt/kvm/arm/vgic.c                    |  50 +++++-----
>  12 files changed, 377 insertions(+), 164 deletions(-)
>  create mode 100644 include/linux/irqchip/arm-gic-common.h
> 


-- 
Jazz is not dead. It just smells funny...

Re: [PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Jason Cooper]

On Thu, Apr 28, 2016 at 02:13:23PM +0100, Marc Zyngier wrote:
> [+ Thomas, Jason]
> 
> Do you have any objection against this going through the KVM tree? The
> dependencies are rather intricate, and Daniel gave us his green light
> already for the clocksource part.
> 
> If you'd rather maintain the usual flow, please let us know and we'll
> deal with it.

I've no objection.

Acked-by: Jason Cooper <jason@lakedaemon.net>

thx,

Jason.

Re: [PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Jason Cooper]

On Thu, Apr 28, 2016 at 02:13:23PM +0100, Marc Zyngier wrote:
> [+ Thomas, Jason]
> 
> Do you have any objection against this going through the KVM tree? The
> dependencies are rather intricate, and Daniel gave us his green light
> already for the clocksource part.
> 
> If you'd rather maintain the usual flow, please let us know and we'll
> deal with it.

I've no objection.

Acked-by: Jason Cooper <jason@lakedaemon.net>

thx,

Jason.

[PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Jason Cooper]

On Thu, Apr 28, 2016 at 02:13:23PM +0100, Marc Zyngier wrote:
> [+ Thomas, Jason]
> 
> Do you have any objection against this going through the KVM tree? The
> dependencies are rather intricate, and Daniel gave us his green light
> already for the clocksource part.
> 
> If you'd rather maintain the usual flow, please let us know and we'll
> deal with it.

I've no objection.

Acked-by: Jason Cooper <jason@lakedaemon.net>

thx,

Jason.

Re: [PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Christoffer Dall]

On Mon, May 02, 2016 at 12:54:14PM +0000, Jason Cooper wrote:
> On Thu, Apr 28, 2016 at 02:13:23PM +0100, Marc Zyngier wrote:
> > [+ Thomas, Jason]
> > 
> > Do you have any objection against this going through the KVM tree? The
> > dependencies are rather intricate, and Daniel gave us his green light
> > already for the clocksource part.
> > 
> > If you'd rather maintain the usual flow, please let us know and we'll
> > deal with it.
> 
> I've no objection.
> 
> Acked-by: Jason Cooper <jason@lakedaemon.net>
> 
Just to be clear, that's on all the irqchip patches, right?

Thanks!
-Christoffer

Re: [PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Christoffer Dall]

On Mon, May 02, 2016 at 12:54:14PM +0000, Jason Cooper wrote:
> On Thu, Apr 28, 2016 at 02:13:23PM +0100, Marc Zyngier wrote:
> > [+ Thomas, Jason]
> > 
> > Do you have any objection against this going through the KVM tree? The
> > dependencies are rather intricate, and Daniel gave us his green light
> > already for the clocksource part.
> > 
> > If you'd rather maintain the usual flow, please let us know and we'll
> > deal with it.
> 
> I've no objection.
> 
> Acked-by: Jason Cooper <jason@lakedaemon.net>
> 
Just to be clear, that's on all the irqchip patches, right?

Thanks!
-Christoffer

[PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Christoffer Dall]

On Mon, May 02, 2016 at 12:54:14PM +0000, Jason Cooper wrote:
> On Thu, Apr 28, 2016 at 02:13:23PM +0100, Marc Zyngier wrote:
> > [+ Thomas, Jason]
> > 
> > Do you have any objection against this going through the KVM tree? The
> > dependencies are rather intricate, and Daniel gave us his green light
> > already for the clocksource part.
> > 
> > If you'd rather maintain the usual flow, please let us know and we'll
> > deal with it.
> 
> I've no objection.
> 
> Acked-by: Jason Cooper <jason@lakedaemon.net>
> 
Just to be clear, that's on all the irqchip patches, right?

Thanks!
-Christoffer

Re: [PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Jason Cooper]

On Tue, May 03, 2016 at 10:21:24AM +0200, Christoffer Dall wrote:
> On Mon, May 02, 2016 at 12:54:14PM +0000, Jason Cooper wrote:
> > On Thu, Apr 28, 2016 at 02:13:23PM +0100, Marc Zyngier wrote:
> > > [+ Thomas, Jason]
> > > 
> > > Do you have any objection against this going through the KVM tree? The
> > > dependencies are rather intricate, and Daniel gave us his green light
> > > already for the clocksource part.
> > > 
> > > If you'd rather maintain the usual flow, please let us know and we'll
> > > deal with it.
> > 
> > I've no objection.
> > 
> > Acked-by: Jason Cooper <jason@lakedaemon.net>
> > 
> Just to be clear, that's on all the irqchip patches, right?

Correct.

thx,

Jason.

[PATCH v6 00/10] arm64: Add support for KVM with ACPI

[Jason Cooper]

On Tue, May 03, 2016 at 10:21:24AM +0200, Christoffer Dall wrote:
> On Mon, May 02, 2016 at 12:54:14PM +0000, Jason Cooper wrote:
> > On Thu, Apr 28, 2016 at 02:13:23PM +0100, Marc Zyngier wrote:
> > > [+ Thomas, Jason]
> > > 
> > > Do you have any objection against this going through the KVM tree? The
> > > dependencies are rather intricate, and Daniel gave us his green light
> > > already for the clocksource part.
> > > 
> > > If you'd rather maintain the usual flow, please let us know and we'll
> > > deal with it.
> > 
> > I've no objection.
> > 
> > Acked-by: Jason Cooper <jason@lakedaemon.net>
> > 
> Just to be clear, that's on all the irqchip patches, right?

Correct.

thx,

Jason.