* [PATCH] cpufreq: st: enable selective initialization based on the platform
@ 2016-04-27 11:40 Sudeep Holla
2016-04-27 11:47 ` Viresh Kumar
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Sudeep Holla @ 2016-04-27 11:40 UTC (permalink / raw)
To: linux-kernel, Lee Jones, Viresh Kumar
Cc: Sudeep Holla, Rafael J. Wysocki, linux-pm
The sti-cpufreq does unconditional registration of the cpufreq-dt driver
which causes issue on an multi-platform build. For example, on Vexpress
TC2 platform, we get the following error on boot:
cpu cpu0: OPP-v2 not supported
cpu cpu0: Not doing voltage scaling
cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
for cpu:0, -19
cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
...
arm_big_little: bL_cpufreq_register: Failed registering platform driver:
vexpress-spc, err: -17
The actual driver fails to initialise as cpufreq-dt is probed
successfully, which is incorrect. This issue can happen to any platform
not using cpufreq-dt in a multi-platform build.
This patch adds a check to do selective initialization of the driver.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/cpufreq/sti-cpufreq.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
index a9c659f58974..5fce58712a97 100644
--- a/drivers/cpufreq/sti-cpufreq.c
+++ b/drivers/cpufreq/sti-cpufreq.c
@@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
{
int ret;
+ if ((!of_machine_is_compatible("st,stih407-b2120")) &&
+ (!of_machine_is_compatible("st,stih407")))
+ return -ENODEV;
+
ddata.cpu = get_cpu_device(0);
if (!ddata.cpu) {
dev_err(ddata.cpu, "Failed to get device for CPU0\n");
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] cpufreq: st: enable selective initialization based on the platform
2016-04-27 11:40 [PATCH] cpufreq: st: enable selective initialization based on the platform Sudeep Holla
@ 2016-04-27 11:47 ` Viresh Kumar
2016-04-27 12:43 ` Sudeep Holla
2016-04-27 16:07 ` Lee Jones
2016-04-27 16:18 ` [PATCH v2] " Sudeep Holla
2 siblings, 1 reply; 9+ messages in thread
From: Viresh Kumar @ 2016-04-27 11:47 UTC (permalink / raw)
To: Sudeep Holla; +Cc: linux-kernel, Lee Jones, Rafael J. Wysocki, linux-pm
On 27-04-16, 12:40, Sudeep Holla wrote:
> The sti-cpufreq does unconditional registration of the cpufreq-dt driver
> which causes issue on an multi-platform build. For example, on Vexpress
> TC2 platform, we get the following error on boot:
>
> cpu cpu0: OPP-v2 not supported
> cpu cpu0: Not doing voltage scaling
> cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
> for cpu:0, -19
> cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
> ...
> arm_big_little: bL_cpufreq_register: Failed registering platform driver:
> vexpress-spc, err: -17
>
> The actual driver fails to initialise as cpufreq-dt is probed
> successfully, which is incorrect. This issue can happen to any platform
> not using cpufreq-dt in a multi-platform build.
>
> This patch adds a check to do selective initialization of the driver.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> drivers/cpufreq/sti-cpufreq.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
> index a9c659f58974..5fce58712a97 100644
> --- a/drivers/cpufreq/sti-cpufreq.c
> +++ b/drivers/cpufreq/sti-cpufreq.c
> @@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
> {
> int ret;
>
> + if ((!of_machine_is_compatible("st,stih407-b2120")) &&
> + (!of_machine_is_compatible("st,stih407")))
Isn't just testing this for stih407 enough? instead of two ?
> + return -ENODEV;
> +
> ddata.cpu = get_cpu_device(0);
> if (!ddata.cpu) {
> dev_err(ddata.cpu, "Failed to get device for CPU0\n");
> --
> 1.9.1
--
viresh
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] cpufreq: st: enable selective initialization based on the platform
2016-04-27 11:47 ` Viresh Kumar
@ 2016-04-27 12:43 ` Sudeep Holla
0 siblings, 0 replies; 9+ messages in thread
From: Sudeep Holla @ 2016-04-27 12:43 UTC (permalink / raw)
To: Viresh Kumar
Cc: Sudeep Holla, linux-kernel, Lee Jones, Rafael J. Wysocki, linux-pm
On 27/04/16 12:47, Viresh Kumar wrote:
> On 27-04-16, 12:40, Sudeep Holla wrote:
>> The sti-cpufreq does unconditional registration of the cpufreq-dt driver
>> which causes issue on an multi-platform build. For example, on Vexpress
>> TC2 platform, we get the following error on boot:
>>
>> cpu cpu0: OPP-v2 not supported
>> cpu cpu0: Not doing voltage scaling
>> cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
>> for cpu:0, -19
>> cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
>> ...
>> arm_big_little: bL_cpufreq_register: Failed registering platform driver:
>> vexpress-spc, err: -17
>>
>> The actual driver fails to initialise as cpufreq-dt is probed
>> successfully, which is incorrect. This issue can happen to any platform
>> not using cpufreq-dt in a multi-platform build.
>>
>> This patch adds a check to do selective initialization of the driver.
>>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
>> Cc: Viresh Kumar <viresh.kumar@linaro.org>
>> Cc: linux-pm@vger.kernel.org
>> Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>> ---
>> drivers/cpufreq/sti-cpufreq.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
>> index a9c659f58974..5fce58712a97 100644
>> --- a/drivers/cpufreq/sti-cpufreq.c
>> +++ b/drivers/cpufreq/sti-cpufreq.c
>> @@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
>> {
>> int ret;
>>
>> + if ((!of_machine_is_compatible("st,stih407-b2120")) &&
>> + (!of_machine_is_compatible("st,stih407")))
>
> Isn't just testing this for stih407 enough? instead of two ?
>
Yes that should be sufficient but it would be good if Lee confirms the
same., just played safe :)
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] cpufreq: st: enable selective initialization based on the platform
2016-04-27 11:40 [PATCH] cpufreq: st: enable selective initialization based on the platform Sudeep Holla
2016-04-27 11:47 ` Viresh Kumar
@ 2016-04-27 16:07 ` Lee Jones
2016-04-27 16:16 ` Sudeep Holla
2016-04-27 16:18 ` [PATCH v2] " Sudeep Holla
2 siblings, 1 reply; 9+ messages in thread
From: Lee Jones @ 2016-04-27 16:07 UTC (permalink / raw)
To: Sudeep Holla; +Cc: linux-kernel, Viresh Kumar, Rafael J. Wysocki, linux-pm
On Wed, 27 Apr 2016, Sudeep Holla wrote:
> The sti-cpufreq does unconditional registration of the cpufreq-dt driver
> which causes issue on an multi-platform build. For example, on Vexpress
> TC2 platform, we get the following error on boot:
>
> cpu cpu0: OPP-v2 not supported
> cpu cpu0: Not doing voltage scaling
> cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
> for cpu:0, -19
> cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
> ...
> arm_big_little: bL_cpufreq_register: Failed registering platform driver:
> vexpress-spc, err: -17
>
> The actual driver fails to initialise as cpufreq-dt is probed
> successfully, which is incorrect. This issue can happen to any platform
> not using cpufreq-dt in a multi-platform build.
Ah yes. One of the pitfalls of not requiring platform registration.
> This patch adds a check to do selective initialization of the driver.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> drivers/cpufreq/sti-cpufreq.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
> index a9c659f58974..5fce58712a97 100644
> --- a/drivers/cpufreq/sti-cpufreq.c
> +++ b/drivers/cpufreq/sti-cpufreq.c
> @@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
> {
> int ret;
>
> + if ((!of_machine_is_compatible("st,stih407-b2120")) &&
> + (!of_machine_is_compatible("st,stih407")))
> + return -ENODEV;
You need to check for "st,stih407" and "st,stih410".
> ddata.cpu = get_cpu_device(0);
> if (!ddata.cpu) {
> dev_err(ddata.cpu, "Failed to get device for CPU0\n");
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] cpufreq: st: enable selective initialization based on the platform
2016-04-27 16:07 ` Lee Jones
@ 2016-04-27 16:16 ` Sudeep Holla
0 siblings, 0 replies; 9+ messages in thread
From: Sudeep Holla @ 2016-04-27 16:16 UTC (permalink / raw)
To: Lee Jones
Cc: Sudeep Holla, linux-kernel, Viresh Kumar, Rafael J. Wysocki, linux-pm
On 27/04/16 17:07, Lee Jones wrote:
> On Wed, 27 Apr 2016, Sudeep Holla wrote:
>
[...]
>>
>> + if ((!of_machine_is_compatible("st,stih407-b2120")) &&
>> + (!of_machine_is_compatible("st,stih407")))
>> + return -ENODEV;
>
> You need to check for "st,stih407" and "st,stih410".
>
Thanks, will fix it and post new version soon.
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2] cpufreq: st: enable selective initialization based on the platform
2016-04-27 11:40 [PATCH] cpufreq: st: enable selective initialization based on the platform Sudeep Holla
2016-04-27 11:47 ` Viresh Kumar
2016-04-27 16:07 ` Lee Jones
@ 2016-04-27 16:18 ` Sudeep Holla
2016-04-28 2:19 ` Viresh Kumar
` (2 more replies)
2 siblings, 3 replies; 9+ messages in thread
From: Sudeep Holla @ 2016-04-27 16:18 UTC (permalink / raw)
To: linux-kernel, Lee Jones, Viresh Kumar
Cc: Sudeep Holla, Rafael J. Wysocki, linux-pm
The sti-cpufreq does unconditional registration of the cpufreq-dt driver
which causes issue on an multi-platform build. For example, on Vexpress
TC2 platform, we get the following error on boot:
cpu cpu0: OPP-v2 not supported
cpu cpu0: Not doing voltage scaling
cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
for cpu:0, -19
cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
...
arm_big_little: bL_cpufreq_register: Failed registering platform driver:
vexpress-spc, err: -17
The actual driver fails to initialise as cpufreq-dt is probed
successfully, which is incorrect. This issue can happen to any platform
not using cpufreq-dt in a multi-platform build.
This patch adds a check to do selective initialization of the driver.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/cpufreq/sti-cpufreq.c | 4 ++++
1 file changed, 4 insertions(+)
v1->v2:
- Updated compatible strings as per Lee's confirmation
diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
index a9c659f58974..04042038ec4b 100644
--- a/drivers/cpufreq/sti-cpufreq.c
+++ b/drivers/cpufreq/sti-cpufreq.c
@@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
{
int ret;
+ if ((!of_machine_is_compatible("st,stih407")) &&
+ (!of_machine_is_compatible("st,stih410")))
+ return -ENODEV;
+
ddata.cpu = get_cpu_device(0);
if (!ddata.cpu) {
dev_err(ddata.cpu, "Failed to get device for CPU0\n");
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2] cpufreq: st: enable selective initialization based on the platform
2016-04-27 16:18 ` [PATCH v2] " Sudeep Holla
@ 2016-04-28 2:19 ` Viresh Kumar
2016-04-28 7:19 ` Lee Jones
2016-05-04 21:22 ` Rafael J. Wysocki
2 siblings, 0 replies; 9+ messages in thread
From: Viresh Kumar @ 2016-04-28 2:19 UTC (permalink / raw)
To: Sudeep Holla; +Cc: linux-kernel, Lee Jones, Rafael J. Wysocki, linux-pm
On 27-04-16, 17:18, Sudeep Holla wrote:
> The sti-cpufreq does unconditional registration of the cpufreq-dt driver
> which causes issue on an multi-platform build. For example, on Vexpress
> TC2 platform, we get the following error on boot:
>
> cpu cpu0: OPP-v2 not supported
> cpu cpu0: Not doing voltage scaling
> cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
> for cpu:0, -19
> cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
> ...
> arm_big_little: bL_cpufreq_register: Failed registering platform driver:
> vexpress-spc, err: -17
>
> The actual driver fails to initialise as cpufreq-dt is probed
> successfully, which is incorrect. This issue can happen to any platform
> not using cpufreq-dt in a multi-platform build.
>
> This patch adds a check to do selective initialization of the driver.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> drivers/cpufreq/sti-cpufreq.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> v1->v2:
> - Updated compatible strings as per Lee's confirmation
>
> diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
> index a9c659f58974..04042038ec4b 100644
> --- a/drivers/cpufreq/sti-cpufreq.c
> +++ b/drivers/cpufreq/sti-cpufreq.c
> @@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
> {
> int ret;
>
> + if ((!of_machine_is_compatible("st,stih407")) &&
> + (!of_machine_is_compatible("st,stih410")))
> + return -ENODEV;
> +
> ddata.cpu = get_cpu_device(0);
> if (!ddata.cpu) {
> dev_err(ddata.cpu, "Failed to get device for CPU0\n");
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2] cpufreq: st: enable selective initialization based on the platform
2016-04-27 16:18 ` [PATCH v2] " Sudeep Holla
2016-04-28 2:19 ` Viresh Kumar
@ 2016-04-28 7:19 ` Lee Jones
2016-05-04 21:22 ` Rafael J. Wysocki
2 siblings, 0 replies; 9+ messages in thread
From: Lee Jones @ 2016-04-28 7:19 UTC (permalink / raw)
To: Sudeep Holla; +Cc: linux-kernel, Viresh Kumar, Rafael J. Wysocki, linux-pm
On Wed, 27 Apr 2016, Sudeep Holla wrote:
> The sti-cpufreq does unconditional registration of the cpufreq-dt driver
> which causes issue on an multi-platform build. For example, on Vexpress
> TC2 platform, we get the following error on boot:
>
> cpu cpu0: OPP-v2 not supported
> cpu cpu0: Not doing voltage scaling
> cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
> for cpu:0, -19
> cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
> ...
> arm_big_little: bL_cpufreq_register: Failed registering platform driver:
> vexpress-spc, err: -17
>
> The actual driver fails to initialise as cpufreq-dt is probed
> successfully, which is incorrect. This issue can happen to any platform
> not using cpufreq-dt in a multi-platform build.
>
> This patch adds a check to do selective initialization of the driver.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> drivers/cpufreq/sti-cpufreq.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> v1->v2:
> - Updated compatible strings as per Lee's confirmation
Acked-by: Lee Jones <lee.jones@linaro.org>
> diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
> index a9c659f58974..04042038ec4b 100644
> --- a/drivers/cpufreq/sti-cpufreq.c
> +++ b/drivers/cpufreq/sti-cpufreq.c
> @@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
> {
> int ret;
>
> + if ((!of_machine_is_compatible("st,stih407")) &&
> + (!of_machine_is_compatible("st,stih410")))
> + return -ENODEV;
> +
> ddata.cpu = get_cpu_device(0);
> if (!ddata.cpu) {
> dev_err(ddata.cpu, "Failed to get device for CPU0\n");
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2] cpufreq: st: enable selective initialization based on the platform
2016-04-27 16:18 ` [PATCH v2] " Sudeep Holla
2016-04-28 2:19 ` Viresh Kumar
2016-04-28 7:19 ` Lee Jones
@ 2016-05-04 21:22 ` Rafael J. Wysocki
2 siblings, 0 replies; 9+ messages in thread
From: Rafael J. Wysocki @ 2016-05-04 21:22 UTC (permalink / raw)
To: Sudeep Holla; +Cc: linux-kernel, Lee Jones, Viresh Kumar, linux-pm
On Wednesday, April 27, 2016 05:18:59 PM Sudeep Holla wrote:
> The sti-cpufreq does unconditional registration of the cpufreq-dt driver
> which causes issue on an multi-platform build. For example, on Vexpress
> TC2 platform, we get the following error on boot:
>
> cpu cpu0: OPP-v2 not supported
> cpu cpu0: Not doing voltage scaling
> cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
> for cpu:0, -19
> cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6)
> ...
> arm_big_little: bL_cpufreq_register: Failed registering platform driver:
> vexpress-spc, err: -17
>
> The actual driver fails to initialise as cpufreq-dt is probed
> successfully, which is incorrect. This issue can happen to any platform
> not using cpufreq-dt in a multi-platform build.
>
> This patch adds a check to do selective initialization of the driver.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Fixes: ab0ea257fc58 ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
> drivers/cpufreq/sti-cpufreq.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> v1->v2:
> - Updated compatible strings as per Lee's confirmation
>
> diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
> index a9c659f58974..04042038ec4b 100644
> --- a/drivers/cpufreq/sti-cpufreq.c
> +++ b/drivers/cpufreq/sti-cpufreq.c
> @@ -259,6 +259,10 @@ static int sti_cpufreq_init(void)
> {
> int ret;
>
> + if ((!of_machine_is_compatible("st,stih407")) &&
> + (!of_machine_is_compatible("st,stih410")))
> + return -ENODEV;
> +
> ddata.cpu = get_cpu_device(0);
> if (!ddata.cpu) {
> dev_err(ddata.cpu, "Failed to get device for CPU0\n");
Applied with the ACKs, thanks!
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-05-04 21:19 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-27 11:40 [PATCH] cpufreq: st: enable selective initialization based on the platform Sudeep Holla
2016-04-27 11:47 ` Viresh Kumar
2016-04-27 12:43 ` Sudeep Holla
2016-04-27 16:07 ` Lee Jones
2016-04-27 16:16 ` Sudeep Holla
2016-04-27 16:18 ` [PATCH v2] " Sudeep Holla
2016-04-28 2:19 ` Viresh Kumar
2016-04-28 7:19 ` Lee Jones
2016-05-04 21:22 ` Rafael J. Wysocki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.