Re: [PATCH v8 8/8] i2c: rk3x: support fast-mode plus for rk3399

[Caesar Wang <caesar.upstream@gmail.com>]

在 2016年05月11日 03:33, David Wu 写道:
> Signed-off-by: David Wu <david.wu@rock-chips.com>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>

Tested-by: Caesar Wang <wxt@rock-chips.com>
> ---
> Change in v8:
> - None
>
>   drivers/i2c/busses/i2c-rk3x.c | 21 +++++++++++++++++----
>   1 file changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 25ed1ad..0ba25ee 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -126,6 +126,17 @@ static const struct i2c_spec_values fast_mode_spec = {
>   	.min_hold_buffer_ns = 1300,
>   };
>   
> +static const struct i2c_spec_values fast_mode_plus_spec = {
> +	.min_hold_start_ns = 260,
> +	.min_low_ns = 500,
> +	.min_high_ns = 260,
> +	.min_setup_start_ns = 260,
> +	.max_data_hold_ns = 400,
> +	.min_data_setup_ns = 50,
> +	.min_setup_stop_ns = 260,
> +	.min_hold_buffer_ns = 500,
> +};
> +
>   /**
>    * struct rk3x_i2c_calced_timings:
>    * @div_low: Divider output for low
> @@ -531,8 +542,10 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
>   {
>   	if (speed <= 100000)
>   		return &standard_mode_spec;
> -	else
> +	else if (speed <= 400000)
>   		return &fast_mode_spec;
> +	else
> +		return &fast_mode_plus_spec;
>   }
>   
>   /**
> @@ -743,9 +756,9 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
>   	const struct i2c_spec_values *spec;
>   	int ret = 0;
>   
> -	/* Support standard-mode and fast-mode */
> -	if (WARN_ON(t->bus_freq_hz > 400000))
> -		t->bus_freq_hz = 400000;
> +	/* Support standard-mode, fast-mode and fast-mode plus */
> +	if (WARN_ON(t->bus_freq_hz > 1000000))
> +		t->bus_freq_hz = 1000000;
>   
>   	/* prevent scl_rate_khz from becoming 0 */
>   	if (WARN_ON(t->bus_freq_hz < 1000))


-- 
Thanks,
Caesar