* Ethernet issues in Yocto
@ 2016-05-26 13:26 Surya
0 siblings, 0 replies; only message in thread
From: Surya @ 2016-05-26 13:26 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 967 bytes --]
Hello all,
Recently i have builded yocto rootfs for am335x. I am getting some
strange issues with eth0 & eth1 port.
As i am trying to make eth0 port down manually by "ifconfig eth0 down",
but its not happening as per expected. It suddenly turns up within 2/3
seconds.
Scenario:
================
root@phycore-ge-am335x:
<mailto:root@phycore-ge-am335x:>~# ifconfig eth0 down
root@phycore-ge-am335x: <mailto:root@phycore-ge-am335x:>~# [
2987.129897] net eth0: initializing cpsw version 1.12 (0)
[ 2987.145498] net eth0: phy found : id is : 0x7c0f1
[ 2987.160812] 8021q: adding VLAN 0 to HW filter on device eth0
[ 2987.167287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2989.145225] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 2989.151696] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
It seems the error is with "systemd-network.service".
Can i get any suggestion regarding this.
Thanks
Surya
[-- Attachment #2: Type: text/html, Size: 10917 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-05-26 13:26 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-26 13:26 Ethernet issues in Yocto Surya
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.