* GV98 adapter, experience with nouveau @ 2016-06-01 11:48 Yury Tarasievich [not found] ` <574ECB92.1010801-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: Yury Tarasievich @ 2016-06-01 11:48 UTC (permalink / raw) To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW I'm trying to put to work the nouveau driver on slackware 64 bits current, kernel 4.4.*. I've thought the hardware to be some obscure OEM variant of GT610. However, kind soul on IRC pointed out that it's a G98 really, 'GeForce 9300 GS or 8400 GS'. Proprietary NVIDIA drivers: * 340.96 installs okay, console works, but X doesn't start, with unspecified error occuring when trying to initialise hardware (-19); * 304.131 works, with no undue surprises. I've experienced a lot of problems with nouveau driver (as packaged for Slackware on Dec 16, 2015; build date in logs: '19 November 2015 12:46:02AM'): 1) Console does not initialise the output correctly if video mode is not restricted to 640x480 by kernel command line with '... video=640x480'. Any other (bigger) resolution there, or no restriction, and the screen blanks; also, for either 800x600 or 1024x768 upper limits the monitor outputs the warning about unusable mode, 26.8KHz/43Hz for 800x600, and 21.6KHz/27Hz for 1024x768. The input works. I can log in and start X, which starts (!) and works, but produces no output either. No such problem with NVIDIA drivers. 2) The working mode restriction 640x480 gives the console set to 68Hz vertical refresh (as monitor reports). 3) The X started from console (having 640x480 restriction) allows only 640x480 mode in config. Any other mode produces working X with blank screen, excepting console started restrictred to 800x600 or 1024x768, which retains the monitor's floating message about 'unusable mode'. Either way, input in X works. 4) The X in 640x480 has actual vertical refresh of 68Hz, which xrandr reports as 75Hz. Attempt to change vert. refresh rate to 60Hz produces screen 'stroboscoping'. Any other resolution set via xrandr produces blank screen. Any advice? NVIDIA driver files removed, full dmesg and xorg available. Cut of dmesg with nouveau lines is in postscriptum. -Yury PS [ 7.137052] nouveau 0000:02:00.0: NVIDIA G98 (298500a2) [ 7.256163] nouveau 0000:02:00.0: bios: version 70.18.36.00.00 [ 7.258447] nouveau 0000:02:00.0: disp: conn 02:0261: func 08 lookup failed, -2 [ 7.279208] nouveau 0000:02:00.0: bios: M0203T not found [ 7.279327] nouveau 0000:02:00.0: bios: M0203E not matched! [ 7.279442] nouveau 0000:02:00.0: fb: 1024 MiB DDR2 [ 7.328218] nouveau 0000:02:00.0: DRM: VRAM: 1024 MiB [ 7.328332] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB [ 7.328448] nouveau 0000:02:00.0: DRM: TMDS table version 2.0 [ 7.328563] nouveau 0000:02:00.0: DRM: DCB version 4.0 [ 7.328677] nouveau 0000:02:00.0: DRM: DCB outp 00: 02000300 00000028 [ 7.328793] nouveau 0000:02:00.0: DRM: DCB outp 01: 01000302 00020030 [ 7.328908] nouveau 0000:02:00.0: DRM: DCB outp 02: 04011310 00000028 [ 7.329035] nouveau 0000:02:00.0: DRM: DCB outp 03: 02022322 00c20090 [ 7.329150] nouveau 0000:02:00.0: DRM: DCB conn 00: 00001030 [ 7.329264] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100 [ 7.329378] nouveau 0000:02:00.0: DRM: DCB conn 02: 00002261 [ 7.339193] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies [ 7.408036] nouveau 0000:02:00.0: DRM: allocated 640x480 fb: 0x50000, bo ffff8800bf77c000 [ 7.408442] fbcon: nouveaufb (fb0) is primary device [ 7.410533] nouveau 0000:02:00.0: devinit: unable to compute acceptable pll values [ 7.410535] nouveau 0000:02:00.0: devinit: failed pll calculation [ 7.470351] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device [ 7.477047] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0 _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <574ECB92.1010801-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: GV98 adapter, experience with nouveau [not found] ` <574ECB92.1010801-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-06-01 17:38 ` poma [not found] ` <4bb5abf0-1fb5-943b-b7d4-8de9f0d02571-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: poma @ 2016-06-01 17:38 UTC (permalink / raw) To: Yury Tarasievich, nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW On 01.06.2016 13:48, Yury Tarasievich wrote: > I'm trying to put to work the nouveau driver on > slackware 64 bits current, kernel 4.4.*. > > I've thought the hardware to be some obscure OEM > variant of GT610. However, kind soul on IRC > pointed out that it's a G98 really, 'GeForce > 9300 GS or 8400 GS'. > > Proprietary NVIDIA drivers: > * 340.96 installs okay, console works, but X > doesn't start, with unspecified error occuring > when trying to initialise hardware (-19); > * 304.131 works, with no undue surprises. > > I've experienced a lot of problems with nouveau > driver (as packaged for Slackware on Dec 16, > 2015; build date in logs: '19 November 2015 > 12:46:02AM'): > > 1) Console does not initialise the output > correctly if video mode is not restricted to > 640x480 by kernel command line with '... > video=640x480'. Any other (bigger) resolution > there, or no restriction, and the screen blanks; > also, for either 800x600 or 1024x768 upper > limits the monitor outputs the warning about > unusable mode, 26.8KHz/43Hz for 800x600, and > 21.6KHz/27Hz for 1024x768. > > The input works. I can log in and start X, which > starts (!) and works, but produces no output either. > > No such problem with NVIDIA drivers. > > 2) The working mode restriction 640x480 gives > the console set to 68Hz vertical refresh (as > monitor reports). > > 3) The X started from console (having 640x480 > restriction) allows only 640x480 mode in config. > Any other mode produces working X with blank > screen, excepting console started restrictred to > 800x600 or 1024x768, which retains the monitor's > floating message about 'unusable mode'. Either > way, input in X works. > > 4) The X in 640x480 has actual vertical refresh > of 68Hz, which xrandr reports as 75Hz. Attempt > to change vert. refresh rate to 60Hz produces > screen 'stroboscoping'. Any other resolution set > via xrandr produces blank screen. > > Any advice? NVIDIA driver files removed, full > dmesg and xorg available. Cut of dmesg with > nouveau lines is in postscriptum. > > -Yury > > PS [ 7.137052] nouveau 0000:02:00.0: NVIDIA > G98 (298500a2) > [ 7.256163] nouveau 0000:02:00.0: bios: > version 70.18.36.00.00 > [ 7.258447] nouveau 0000:02:00.0: disp: conn > 02:0261: func 08 lookup failed, -2 > [ 7.279208] nouveau 0000:02:00.0: bios: > M0203T not found > [ 7.279327] nouveau 0000:02:00.0: bios: > M0203E not matched! > [ 7.279442] nouveau 0000:02:00.0: fb: 1024 > MiB DDR2 > [ 7.328218] nouveau 0000:02:00.0: DRM: VRAM: > 1024 MiB > [ 7.328332] nouveau 0000:02:00.0: DRM: GART: > 1048576 MiB > [ 7.328448] nouveau 0000:02:00.0: DRM: TMDS > table version 2.0 > [ 7.328563] nouveau 0000:02:00.0: DRM: DCB > version 4.0 > [ 7.328677] nouveau 0000:02:00.0: DRM: DCB > outp 00: 02000300 00000028 > [ 7.328793] nouveau 0000:02:00.0: DRM: DCB > outp 01: 01000302 00020030 > [ 7.328908] nouveau 0000:02:00.0: DRM: DCB > outp 02: 04011310 00000028 > [ 7.329035] nouveau 0000:02:00.0: DRM: DCB > outp 03: 02022322 00c20090 > [ 7.329150] nouveau 0000:02:00.0: DRM: DCB > conn 00: 00001030 > [ 7.329264] nouveau 0000:02:00.0: DRM: DCB > conn 01: 00000100 > [ 7.329378] nouveau 0000:02:00.0: DRM: DCB > conn 02: 00002261 > [ 7.339193] nouveau 0000:02:00.0: DRM: MM: > using M2MF for buffer copies > [ 7.408036] nouveau 0000:02:00.0: DRM: > allocated 640x480 fb: 0x50000, bo ffff8800bf77c000 > [ 7.408442] fbcon: nouveaufb (fb0) is primary > device > [ 7.410533] nouveau 0000:02:00.0: devinit: > unable to compute acceptable pll values > [ 7.410535] nouveau 0000:02:00.0: devinit: > failed pll calculation > [ 7.470351] nouveau 0000:02:00.0: fb0: > nouveaufb frame buffer device > [ 7.477047] [drm] Initialized nouveau 1.3.1 > 20120801 for 0000:02:00.0 on minor 0 > You can display basic video device info via: $ lspci -knn -d ::0300 Compare output with the https://nouveau.freedesktop.org/wiki/CodeNames/ Also you can try to test with newer software, e.g. https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/x86_64/iso/ Fedora-KDE-Live-x86_64-Rawhide-20160601.n.0.iso If the machine reaches Desktop in the first place, put SELinux in permissive mode: $ su -c "setenforce 0" otherwise config changes will not apply re-log ... Test various Compositor Settings: $ kcmshell5 kwincompositing Observe config file: $ cat ~/.config/kwinrc Check OpenGL info: $ kcmshell5 opengl Check X-Server info $ kcmshell5 xserver Start Terminal emulator to exec commands: ALT+F2: konsole _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <4bb5abf0-1fb5-943b-b7d4-8de9f0d02571-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: GV98 adapter, experience with nouveau [not found] ` <4bb5abf0-1fb5-943b-b7d4-8de9f0d02571-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-06-01 18:20 ` Yury Tarasievich [not found] ` <574F277B.30606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: Yury Tarasievich @ 2016-06-01 18:20 UTC (permalink / raw) To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW Thank you! Now, I'd appreciate some hints on how to make console work, at least. How are the video modes controlled, e.g., can I have some analogue of /etc/fb.modes for nouveau? -Yury On 01/06/16 20:38, poma wrote: > On 01.06.2016 13:48, Yury Tarasievich wrote: ... >> 1) Console does not initialise the output >> correctly if video mode is not restricted to >> 640x480 by kernel command line with '... >> video=640x480'. Any other (bigger) resolution >> there, or no restriction, and the screen blanks; >> also, for either 800x600 or 1024x768 upper >> limits the monitor outputs the warning about >> unusable mode, 26.8KHz/43Hz for 800x600, and >> 21.6KHz/27Hz for 1024x768. ... _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <574F277B.30606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: GV98 adapter, experience with nouveau [not found] ` <574F277B.30606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-06-01 18:44 ` poma [not found] ` <62fab762-7c73-f3b3-8999-dc94af4a784b-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: poma @ 2016-06-01 18:44 UTC (permalink / raw) To: Yury Tarasievich, nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW On 01.06.2016 20:20, Yury Tarasievich wrote: > Thank you! > > Now, I'd appreciate some hints on how to make > console work, at least. > How are the video modes controlled, e.g., can I > have some analogue of /etc/fb.modes for nouveau? > > -Yury > After hand-over: "fb: switching to nouveaufb from VESA VGA" video device "automatically" switches to the native resolution of the connected display. If it does not work: https://nouveau.freedesktop.org/wiki/Bugs/ _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <62fab762-7c73-f3b3-8999-dc94af4a784b-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: GV98 adapter, experience with nouveau [not found] ` <62fab762-7c73-f3b3-8999-dc94af4a784b-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-06-02 6:09 ` poma 0 siblings, 0 replies; 5+ messages in thread From: poma @ 2016-06-02 6:09 UTC (permalink / raw) To: Yury Tarasievich, nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW On 01.06.2016 20:44, poma wrote: > On 01.06.2016 20:20, Yury Tarasievich wrote: >> Thank you! >> >> Now, I'd appreciate some hints on how to make >> console work, at least. >> How are the video modes controlled, e.g., can I >> have some analogue of /etc/fb.modes for nouveau? >> >> -Yury >> > > > After hand-over: > "fb: switching to nouveaufb from VESA VGA" > > video device "automatically" switches to the native resolution of the connected display. > > If it does not work: > https://nouveau.freedesktop.org/wiki/Bugs/ > > "If you are using packages from your distribution and are unable/unwilling to test the latest versions of all the pieces of nouveau, send the bug reports to your distribution and not directly to us. If you're using an out-of-date software version, our first question will probably be "does it still happen on latest"." Ref. https://nouveau.freedesktop.org/wiki/Bugs/ This is why I referred to the "try to test with newer software", e.g. Rawhide LiveCD/DVDs https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/x86_64/iso/ I have tested it with NVIDIA G98 here, and it works as expected. With this approach - test with the "latest and greatest" - you can create a reference point for further comparison - with lower versions of software components. Godspeed _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-06-02 6:09 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-06-01 11:48 GV98 adapter, experience with nouveau Yury Tarasievich [not found] ` <574ECB92.1010801-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-06-01 17:38 ` poma [not found] ` <4bb5abf0-1fb5-943b-b7d4-8de9f0d02571-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-06-01 18:20 ` Yury Tarasievich [not found] ` <574F277B.30606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-06-01 18:44 ` poma [not found] ` <62fab762-7c73-f3b3-8999-dc94af4a784b-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-06-02 6:09 ` poma
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.