From: Benjammin2068 <benjammin2068@gmail.com>
To: linux-raid@vger.kernel.org
Subject: Re: Need Help with crashed RAID5 (that was rebuilding and then had SATA error on another drive)
Date: Thu, 25 Aug 2016 21:54:45 -0500 [thread overview]
Message-ID: <57BFAF75.1080807@gmail.com> (raw)
In-Reply-To: <f3d5add5-cfad-e33f-2f75-934189fa501d@turmel.org>
On 08/25/2016 09:22 PM, Phil Turmel wrote:
> On 08/25/2016 09:20 PM, Ben wrote:
>
>> I read a lot of conflicting info on SCT/ERC online (well, TLER anyway)
>> -- Adam likes it enabled. What say the rest of you?
> Adam is correct, and it's not a matter of "like".
"like" was just an expression.
>
>
> You either must have
> it enabled, or you *must* apply the kernel driver timeout work-around
> (180 seconds) for that drive. Failure to do so results in crashed arrays.
For the ST1000DM003, its SMART capabilities states "SCT Status Supported" -- What does that mean in comparison with the other HD103SJ drives?
It does SCT but doesn't let the user control it or it doesn't do it at all?
(smartctl -l scterc /dev/sde yields a message that implies control is not supported)
>
> Enterprise and NAS drives work out of the box. Desktop/green drives do not.
Yea - I didn't buy any green drives (purposefully anyway) for this system.
>
> Some reading assignments from old discussions (read whole threads if you
> have time):
>
> http://marc.info/?l=linux-raid&m=139050322510249&w=2
> http://marc.info/?l=linux-raid&m=135863964624202&w=2
> http://marc.info/?l=linux-raid&m=135811522817345&w=1
> http://marc.info/?l=linux-raid&m=133761065622164&w=2
> http://marc.info/?l=linux-raid&m=132477199207506
> http://marc.info/?l=linux-raid&m=133665797115876&w=2
> http://marc.info/?l=linux-raid&m=142487508806844&w=3
> http://marc.info/?l=linux-raid&m=144535576302583&w=2
>
Thanks, will go read.
-Ben
next prev parent reply other threads:[~2016-08-26 2:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-22 21:51 Need Help with crashed RAID5 (that was rebuilding and then had SATA error on another drive) Ben Kamen
2016-08-22 23:06 ` Adam Goryachev
2016-08-23 11:36 ` Wols Lists
2016-08-23 15:44 ` Ben
[not found] ` <CADDTLRBf9NPO6OuF4a3b+xffZgeZRqHRG+pJdPmbc9-Jat0HVQ@mail.gmail.com>
[not found] ` <d6d3fe0d-3f9f-985f-9bfb-051428cf221b@websitemanagers.com.au>
[not found] ` <57BBDA5B.3020706@gmail.com>
[not found] ` <57BBDC15.5030301@gmail.com>
[not found] ` <b8c6a380-7e6a-fda9-5834-b85271b26892@websitemanagers.com.au>
[not found] ` <57BC61F7.8070102@gmail.com>
[not found] ` <aca4e83f-9a3f-c200-7c16-3b5d9df52c1e@websitemanagers.com.au>
[not found] ` <57BE450B.4030700@gmail.com>
[not found] ` <56e86db5-456d-e9c1-339d-ba8903fe5dde@websitemanagers.com.au>
[not found] ` <57BE52BC.6040908@gmail.com>
[not found] ` <933228e0-bce4-ffad-f48d-034bf89bc07f@websitemanagers.com.au>
2016-08-26 1:20 ` Ben
2016-08-26 2:22 ` Phil Turmel
2016-08-26 2:54 ` Benjammin2068 [this message]
2016-08-26 12:38 ` Phil Turmel
2016-08-26 18:07 ` Wols Lists
2016-08-28 18:29 ` Benjammin2068
2016-08-28 19:20 ` Anthony Youngman
2016-08-29 1:23 ` Benjammin2068
2016-08-28 23:54 ` Adam Goryachev
2016-08-29 1:25 ` Benjammin2068
2016-08-29 11:19 ` Wols Lists
2016-09-18 17:13 ` Best tool to partition Drives with new sector geometry - (WAS: Need Help with crashed RAID5 (that was rebuilding and then had SATA error on another drive)) Benjammin2068
2016-09-18 17:50 ` Chris Murphy
2016-09-18 18:41 ` Benjammin2068
2016-09-18 19:17 ` Wols Lists
2016-09-18 19:58 ` Benjammin2068
2016-09-18 21:21 ` Wols Lists
2016-09-18 21:29 ` Benjammin2068
2016-09-19 6:25 ` Wols Lists
2016-09-19 16:17 ` Benjammin2068
2016-09-18 18:08 ` Benjammin2068
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57BFAF75.1080807@gmail.com \
--to=benjammin2068@gmail.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.