* [GIT PULL] STM32 DT changes for v5.19 #1
@ 2022-05-04 10:56 ` Alexandre TORGUE
0 siblings, 0 replies; 3+ messages in thread
From: Alexandre TORGUE @ 2022-05-04 10:56 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Kevin Hilman, SoC Team, arm-soc
Cc: Alexandre TORGUE, linux-arm-kernel, linux-stm32
Hi ARM SoC maintainers,
Please consider this first round of STM32 DT updates for v5.19. Main
updates are related to new Protonic 10BaseT boards support and the
addition of a secure version of STM32MP15 boards (ED1/EV1/DK1/DK2) based
on OP-TEE OS and SCMI protocol.
Note, that patch "dt-bindings: rcc: Add optional external ethernet RX
clock properties"
(https://lore.kernel.org/r/20220410220514.21779-1-marex@denx.de) is
already merged in Rob tree.
regards
Alex
The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17:
Linux 5.18-rc1 (2022-04-03 14:08:21 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
tags/stm32-dt-for-v5.19-1
for you to fetch changes up to 5b7e58313a77e951850586cfaa9f5d60122f908f:
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
(2022-05-04 11:03:08 +0200)
----------------------------------------------------------------
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
----------------------------------------------------------------
Alexandre Torgue (6):
dt-bindings: clock: stm32mp1: describes clocks if
"st,stm32mp1-rcc-secure"
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: reset: stm32mp15: rename RST_SCMI define
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: arm: stm32: Add SCMI version of STM32 boards
(DK1/DK2/ED1/EV1)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
Fabien Dessenne (5):
ARM: dts: stm32: fix pinctrl node name warnings (MCU soc)
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on
stm32mp131
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
Krzysztof Kozlowski (2):
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
dt-bindings: arm: stm32: correct blank lines
Marek Vasut (5):
ARM: dts: stm32: Add alternate pinmux for ethernet0 pins
ARM: dts: stm32: Add alternate pinmux for mco2 pins
ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
dt-bindings: rcc: Add optional external ethernet RX clock properties
Oleksij Rempel (4):
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
boards
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
ARM: dts: stm32: add support for Protonic PRTT1x boards
Valentin Caron (2):
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
.../devicetree/bindings/arm/stm32/stm32.yaml | 63 ++++-
.../devicetree/bindings/clock/st,stm32mp1-rcc.yaml | 34 +++
.../bindings/staging/net/wireless/silabs,wfx.yaml | 1 +
arch/arm/boot/dts/Makefile | 7 +
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/stm32h743.dtsi | 2 +-
arch/arm/boot/dts/stm32mp131.dtsi | 19 +-
arch/arm/boot/dts/stm32mp135f-dk.dts | 29 ++
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 +++++
arch/arm/boot/dts/stm32mp151.dtsi | 45 ++-
arch/arm/boot/dts/stm32mp151a-prtt1a.dts | 52 ++++
arch/arm/boot/dts/stm32mp151a-prtt1c.dts | 304
+++++++++++++++++++++
arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi | 229 ++++++++++++++++
arch/arm/boot/dts/stm32mp151a-prtt1s.dts | 63 +++++
arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts | 86 ++++++
arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts | 95 +++++++
arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts | 91 ++++++
arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts | 100 +++++++
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 22 +-
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 1 +
include/dt-bindings/clock/stm32mp1-clks.h | 46 ++--
include/dt-bindings/reset/stm32mp1-resets.h | 24 +-
23 files changed, 1319 insertions(+), 62 deletions(-)
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts
create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] STM32 DT changes for v5.19 #1
@ 2022-05-04 10:56 ` Alexandre TORGUE
0 siblings, 0 replies; 3+ messages in thread
From: Alexandre TORGUE @ 2022-05-04 10:56 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Kevin Hilman, SoC Team, arm-soc
Cc: Alexandre TORGUE, linux-arm-kernel, linux-stm32
Hi ARM SoC maintainers,
Please consider this first round of STM32 DT updates for v5.19. Main
updates are related to new Protonic 10BaseT boards support and the
addition of a secure version of STM32MP15 boards (ED1/EV1/DK1/DK2) based
on OP-TEE OS and SCMI protocol.
Note, that patch "dt-bindings: rcc: Add optional external ethernet RX
clock properties"
(https://lore.kernel.org/r/20220410220514.21779-1-marex@denx.de) is
already merged in Rob tree.
regards
Alex
The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17:
Linux 5.18-rc1 (2022-04-03 14:08:21 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
tags/stm32-dt-for-v5.19-1
for you to fetch changes up to 5b7e58313a77e951850586cfaa9f5d60122f908f:
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
(2022-05-04 11:03:08 +0200)
----------------------------------------------------------------
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
----------------------------------------------------------------
Alexandre Torgue (6):
dt-bindings: clock: stm32mp1: describes clocks if
"st,stm32mp1-rcc-secure"
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: reset: stm32mp15: rename RST_SCMI define
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: arm: stm32: Add SCMI version of STM32 boards
(DK1/DK2/ED1/EV1)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
Fabien Dessenne (5):
ARM: dts: stm32: fix pinctrl node name warnings (MCU soc)
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on
stm32mp131
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
Krzysztof Kozlowski (2):
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
dt-bindings: arm: stm32: correct blank lines
Marek Vasut (5):
ARM: dts: stm32: Add alternate pinmux for ethernet0 pins
ARM: dts: stm32: Add alternate pinmux for mco2 pins
ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
dt-bindings: rcc: Add optional external ethernet RX clock properties
Oleksij Rempel (4):
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
boards
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
ARM: dts: stm32: add support for Protonic PRTT1x boards
Valentin Caron (2):
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
.../devicetree/bindings/arm/stm32/stm32.yaml | 63 ++++-
.../devicetree/bindings/clock/st,stm32mp1-rcc.yaml | 34 +++
.../bindings/staging/net/wireless/silabs,wfx.yaml | 1 +
arch/arm/boot/dts/Makefile | 7 +
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/stm32h743.dtsi | 2 +-
arch/arm/boot/dts/stm32mp131.dtsi | 19 +-
arch/arm/boot/dts/stm32mp135f-dk.dts | 29 ++
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 +++++
arch/arm/boot/dts/stm32mp151.dtsi | 45 ++-
arch/arm/boot/dts/stm32mp151a-prtt1a.dts | 52 ++++
arch/arm/boot/dts/stm32mp151a-prtt1c.dts | 304
+++++++++++++++++++++
arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi | 229 ++++++++++++++++
arch/arm/boot/dts/stm32mp151a-prtt1s.dts | 63 +++++
arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts | 86 ++++++
arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts | 95 +++++++
arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts | 91 ++++++
arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts | 100 +++++++
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 22 +-
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 1 +
include/dt-bindings/clock/stm32mp1-clks.h | 46 ++--
include/dt-bindings/reset/stm32mp1-resets.h | 24 +-
23 files changed, 1319 insertions(+), 62 deletions(-)
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts
create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v5.19 #1
2022-05-04 10:56 ` Alexandre TORGUE
(?)
@ 2022-05-05 19:31 ` patchwork-bot+linux-soc
-1 siblings, 0 replies; 3+ messages in thread
From: patchwork-bot+linux-soc @ 2022-05-05 19:31 UTC (permalink / raw)
To: Alexandre TORGUE; +Cc: soc
Hello:
This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:
On Wed, 4 May 2022 12:56:02 +0200 you wrote:
> Hi ARM SoC maintainers,
>
> Please consider this first round of STM32 DT updates for v5.19. Main
> updates are related to new Protonic 10BaseT boards support and the
> addition of a secure version of STM32MP15 boards (ED1/EV1/DK1/DK2) based
> on OP-TEE OS and SCMI protocol.
>
> [...]
Here is the summary with links:
- [GIT,PULL] STM32 DT changes for v5.19 #1
https://git.kernel.org/soc/soc/c/0fd8954b9e8a
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-05-05 19:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-04 10:56 [GIT PULL] STM32 DT changes for v5.19 #1 Alexandre TORGUE
2022-05-04 10:56 ` Alexandre TORGUE
2022-05-05 19:31 ` patchwork-bot+linux-soc
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.