* [U-Boot] Porting U-Boot on MIPS Au1x00 Family
@ 2010-04-19 18:27 Gurumurthy G M
0 siblings, 0 replies; only message in thread
From: Gurumurthy G M @ 2010-04-19 18:27 UTC (permalink / raw)
To: u-boot
Hi All,
i have a RMI Alchemy Au1350 Board which has 1MB NOR Flash, 512MB SDRAM and 4GB moniNAND. i am customizing the present u-boot board source code available in u-boot.
I need information regarding the porting U-boot on MIPS as i need to change lot of things here. i am using BDI3000 for programming and debugging purpose.
If i just customize the available config file Au1x00.h is enough or i need to do some other changes too. please let me know the more information regarding booting from NOR Flash, i dint find SDRAM initialization and how to enable eMMC (moviNAND) support in U-boot. what all the changes i need to do for u-boot to boot like UART, NOR, SDRAM etc.
Even i need to build Linux kernel for the same.
i am using ELDK 4.1 for MIPS. U-boot is 1.2.0.
With Thanks and Regards,
Gurumurthy Gowdar
Hyundai - Mobis
Senior Software Engineer - Software Development Centre - Hyderabad
INDIA
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-04-19 18:27 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-19 18:27 [U-Boot] Porting U-Boot on MIPS Au1x00 Family Gurumurthy G M
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.